mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-11-01 17:08:10 +00:00
Code Issues Releases Wiki Activity
967956 commits 105 branches 5128 tags 5.6 GiB
Commit graph

523 commits

Author SHA1 Message Date
Markus Mayer
a7c25759d8 memory: brcmstb: dpfe: wait for DCPU to be ready 
We wait for the DCPU to be ready before sending a command.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2019-05-20 09:32:35 -07:00
Markus Mayer
6ca5d2ba9e memory: brcmstb: dpfe: report firmware loading error 
Print an error message if the DCPU firmware couldn't be downloaded.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2019-05-20 09:32:35 -07:00
Markus Mayer
1ffc0b580b memory: brcmstb: dpfe: remove unused code and fix formatting 
Remove an unused struct and fix source code formatting in a few areas.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2019-05-20 09:32:35 -07:00
Markus Mayer
78a6f5bef9 memory: brcmstb: dpfe: use byte 3 of registers MR4-MR8 
For dual-rank LPDDR4, result data for any command is placed in byte 0
and byte 3 of the corresponding MR register by the firmware.
Single-rank RAM was supposed to work the same way. However, due to a
firmware bug, result values are only placed in byte 3 of the
corresponding MR register.

Since byte 3 works for single-rank and dual-rank setups, we change the
Linux driver to always use byte 3, thus returning the correct value in
either case.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2019-05-20 09:32:35 -07:00
Markus Mayer
900c8f578b memory: brcmstb: dpfe: optimize generic_show() 
We can pass a (struct priv_data *) to generic_show() rather than a
(struct device *). For two of the three callers of this function, the
change means one less call to dev_get_drvdata(). For the third caller,
it makes no difference.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2019-05-20 09:32:35 -07:00
Markus Mayer
7ccd2ffce0 memory: brcmstb: dpfe: use msleep() over udelay() 
To be more "scheduler friendly", we use msleep() rather than udelay()
while we wait for the DCPU to respond.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2019-05-20 09:32:35 -07:00
Linus Torvalds
815d469d8c One more patch to remove io.h from clk-provider.h. We used to need this 
include when we had clk_readl() and clk_writel(), but those are gone now
 so this patch pushes the dependency out to the users of clk-provider.h.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlzdx/ERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUeJw/+NfQU+GwmfM1mXUnClTuJthKZRlXQTt4o
 KzD4VtdqWOPSPWF2QNUM3oG5+FxbmzxZBMMyAfWKO4MS/hYvD3wZOdbP56KvoUe6
 I75FHSGYlXFMvohm6vjPvfx30IcBn0QZcP9bhP5B5h0UbIG9annbVWWNR2qBg+/O
 4p3o33CPSIO5W3IblSWrFzuEOBXNlkJKTIZW2BcV33aUCbAD3wrvqoP5l7xBbDJN
 U+QC+4LoZtA1RSM03qOzHleXrXNhBjWNtxRqXCIu0hkmyVdPAHDg0tb745HdLUc+
 PTRCCguU21ANJMf2hD0dYiRi5fSPSLzIqQ2uZW8O6/ChSIMsOrZ43tW1TsQ7E7ZD
 gGEu2aj5euPyTVh0HmWKXyqEEUF/fqywJtwNQSyNTzDvQd807Pabb1YoIzZz9w2S
 V+/PoDVYF90IN1DsuOnbTCQ/BK0bqUb+7BtkrCzJ1ip3FpdB3017zT1b5wIzLjfI
 1NO3ub5iHGAiS1qzChGa3Va56CDjspx66atMomDaeOQsBC983GdWOerBunKxL3UM
 US7rhr9DgPz8p9DEFPeXQXABgZUV4ToBb8nD8b2U1eFiOZthg7CO5mKSuwPGXcBQ
 RsWwmxc87DZJJJno2abacK/h0ii/r8f+3+C9x98vtYewJEC5RHbJygYHcr3YNjo1
 LOdCMassRT4=
 =JjQo
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull more clk framework updates from Stephen Boyd:
 "One more patch to remove io.h from clk-provider.h.

  We used to need this include when we had clk_readl() and clk_writel(),
  but those are gone now so this patch pushes the dependency out to the
  users of clk-provider.h"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Remove io.h from clk-provider.h
 2019-05-16 19:05:35 -07:00
Linus Torvalds
dc413a90ed ARM: SoC-related driver updates 
Various driver updates for platforms and a couple of the small driver
 subsystems we merge through our tree:
 
 Among the larger pieces:
 
  - Power management improvements for TI am335x and am437x (RTC suspend/wake)
  - Misc new additions for Amlogic (socinfo updates)
  - ZynqMP FPGA manager
  - Nvidia improvements for reset/powergate handling
  - PMIC wrapper for Mediatek MT8516
  - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlzc+9QPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3o3sQAIJ2SZnITy/ycvkbhKe+V/806P+aoqMpbZDw
 7ldBQFoIMQqVIoeSSeml+9B86ZGyK4CGTgnvsfAI/Zt2fZSHczjqLP5InbEnvB5M
 4naf0nSjSlkb5F4p24wXQ7WTI8IO45SwqG4hCi/WW6MakxN21cwdMWHBn+TRZWQu
 +AlJdwyDFJoMRXcq8xvLHOBNVAqD3LyvlECbLKqn3+UPwwYw0Ti1dsLwaMLOYDbc
 o/1dC2O8111kg2DgO0OM4Tl7jdbpmGA5MeixbVnmu3t4b2s26trG33eXqK2yWqaV
 XigD85R74GAq/wmgnzjdiNaIgZjlPPitVYaTE4L6Od39zMgXemnsqMlh/byPeO2y
 JvRRLEIciNay9q9uq+8H2zRWwa2wLqAewjssTTMM0RJNQWUtonVCkD8DAx4GLDof
 6Ej42XGbtxnqpf0g854mBJ4zaPfZLN4xK//1Llx9HkM8mhLZLJ7BQvgvW1JzniSa
 XKnmjqK7SySiJ4bbjn+aFk5EkX7Oh5aXno18tVNKXdxc8nWoEw4PHMUmCCHOFPye
 /1oxc95Ux8P/lV+B0ZjiI0yTAX/IpDkEszAYmgdy6pWh1hXnYUr/Rpm7cGUG8kzk
 SbtyB8JOI/DFQ7QMDfPp6e6bcB8zTbUuF9H2MXwPN5TqGzP/mya88DC5Iv1jY4jc
 0oWv/uhj
 =YSfu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

  Among the larger pieces:

   - Power management improvements for TI am335x and am437x (RTC
     suspend/wake)

   - Misc new additions for Amlogic (socinfo updates)

   - ZynqMP FPGA manager

   - Nvidia improvements for reset/powergate handling

   - PMIC wrapper for Mediatek MT8516

   - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  soc: aspeed: fix Kconfig
  soc: add aspeed folder and misc drivers
  spi: zynqmp: Fix build break
  soc: imx: Add generic i.MX8 SoC driver
  MAINTAINERS: Update email for Qualcomm SoC maintainer
  memory: tegra: Fix a typos for "fdcdwr2" mc client
  Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
  memory: tegra: Replace readl-writel with mc_readl-mc_writel
  memory: tegra: Fix integer overflow on tick value calculation
  memory: tegra: Fix missed registers values latching
  ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
  optee: allow to work without static shared memory
  soc/tegra: pmc: Move powergate initialisation to probe
  soc/tegra: pmc: Remove reset sysfs entries on error
  soc/tegra: pmc: Fix reset sources and levels
  soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
  soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
  fpga manager: Adding FPGA Manager support for Xilinx zynqmp
  dt-bindings: fpga: Add bindings for ZynqMP fpga driver
  firmware: xilinx: Add fpga API's
  ...
 2019-05-16 09:19:14 -07:00
Stephen Boyd
62e59c4e69 clk: Remove io.h from clk-provider.h 
Now that we've gotten rid of clk_readl() we can remove io.h from the
clk-provider header and push out the io.h include to any code that isn't
already including the io.h header but using things like readl/writel,
etc.

Found with this grep:

  git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \
  	xargs git grep -l \
	-e '\<__iowrite32_copy\>' --or \
	-e '\<__ioread32_copy\>' --or \
	-e '\<__iowrite64_copy\>' --or \
	-e '\<ioremap_page_range\>' --or \
	-e '\<ioremap_huge_init\>' --or \
	-e '\<arch_ioremap_pud_supported\>' --or \
	-e '\<arch_ioremap_pmd_supported\>' --or \
	-e '\<devm_ioport_map\>' --or \
	-e '\<devm_ioport_unmap\>' --or \
	-e '\<IOMEM_ERR_PTR\>' --or \
	-e '\<devm_ioremap\>' --or \
	-e '\<devm_ioremap_nocache\>' --or \
	-e '\<devm_ioremap_wc\>' --or \
	-e '\<devm_iounmap\>' --or \
	-e '\<devm_ioremap_release\>' --or \
	-e '\<devm_memremap\>' --or \
	-e '\<devm_memunmap\>' --or \
	-e '\<__devm_memremap_pages\>' --or \
	-e '\<pci_remap_cfgspace\>' --or \
	-e '\<arch_has_dev_port\>' --or \
	-e '\<arch_phys_wc_add\>' --or \
	-e '\<arch_phys_wc_del\>' --or \
	-e '\<memremap\>' --or \
	-e '\<memunmap\>' --or \
	-e '\<arch_io_reserve_memtype_wc\>' --or \
	-e '\<arch_io_free_memtype_wc\>' --or \
	-e '\<__io_aw\>' --or \
	-e '\<__io_pbw\>' --or \
	-e '\<__io_paw\>' --or \
	-e '\<__io_pbr\>' --or \
	-e '\<__io_par\>' --or \
	-e '\<__raw_readb\>' --or \
	-e '\<__raw_readw\>' --or \
	-e '\<__raw_readl\>' --or \
	-e '\<__raw_readq\>' --or \
	-e '\<__raw_writeb\>' --or \
	-e '\<__raw_writew\>' --or \
	-e '\<__raw_writel\>' --or \
	-e '\<__raw_writeq\>' --or \
	-e '\<readb\>' --or \
	-e '\<readw\>' --or \
	-e '\<readl\>' --or \
	-e '\<readq\>' --or \
	-e '\<writeb\>' --or \
	-e '\<writew\>' --or \
	-e '\<writel\>' --or \
	-e '\<writeq\>' --or \
	-e '\<readb_relaxed\>' --or \
	-e '\<readw_relaxed\>' --or \
	-e '\<readl_relaxed\>' --or \
	-e '\<readq_relaxed\>' --or \
	-e '\<writeb_relaxed\>' --or \
	-e '\<writew_relaxed\>' --or \
	-e '\<writel_relaxed\>' --or \
	-e '\<writeq_relaxed\>' --or \
	-e '\<readsb\>' --or \
	-e '\<readsw\>' --or \
	-e '\<readsl\>' --or \
	-e '\<readsq\>' --or \
	-e '\<writesb\>' --or \
	-e '\<writesw\>' --or \
	-e '\<writesl\>' --or \
	-e '\<writesq\>' --or \
	-e '\<inb\>' --or \
	-e '\<inw\>' --or \
	-e '\<inl\>' --or \
	-e '\<outb\>' --or \
	-e '\<outw\>' --or \
	-e '\<outl\>' --or \
	-e '\<inb_p\>' --or \
	-e '\<inw_p\>' --or \
	-e '\<inl_p\>' --or \
	-e '\<outb_p\>' --or \
	-e '\<outw_p\>' --or \
	-e '\<outl_p\>' --or \
	-e '\<insb\>' --or \
	-e '\<insw\>' --or \
	-e '\<insl\>' --or \
	-e '\<outsb\>' --or \
	-e '\<outsw\>' --or \
	-e '\<outsl\>' --or \
	-e '\<insb_p\>' --or \
	-e '\<insw_p\>' --or \
	-e '\<insl_p\>' --or \
	-e '\<outsb_p\>' --or \
	-e '\<outsw_p\>' --or \
	-e '\<outsl_p\>' --or \
	-e '\<ioread8\>' --or \
	-e '\<ioread16\>' --or \
	-e '\<ioread32\>' --or \
	-e '\<ioread64\>' --or \
	-e '\<iowrite8\>' --or \
	-e '\<iowrite16\>' --or \
	-e '\<iowrite32\>' --or \
	-e '\<iowrite64\>' --or \
	-e '\<ioread16be\>' --or \
	-e '\<ioread32be\>' --or \
	-e '\<ioread64be\>' --or \
	-e '\<iowrite16be\>' --or \
	-e '\<iowrite32be\>' --or \
	-e '\<iowrite64be\>' --or \
	-e '\<ioread8_rep\>' --or \
	-e '\<ioread16_rep\>' --or \
	-e '\<ioread32_rep\>' --or \
	-e '\<ioread64_rep\>' --or \
	-e '\<iowrite8_rep\>' --or \
	-e '\<iowrite16_rep\>' --or \
	-e '\<iowrite32_rep\>' --or \
	-e '\<iowrite64_rep\>' --or \
	-e '\<__io_virt\>' --or \
	-e '\<pci_iounmap\>' --or \
	-e '\<virt_to_phys\>' --or \
	-e '\<phys_to_virt\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<__ioremap\>' --or \
	-e '\<iounmap\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<ioremap_nocache\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wt\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<xlate_dev_kmem_ptr\>' --or \
	-e '\<xlate_dev_mem_ptr\>' --or \
	-e '\<unxlate_dev_mem_ptr\>' --or \
	-e '\<virt_to_bus\>' --or \
	-e '\<bus_to_virt\>' --or \
	-e '\<memset_io\>' --or \
	-e '\<memcpy_fromio\>' --or \
	-e '\<memcpy_toio\>'

I also reordered a couple includes when they weren't alphabetical and
removed clk.h from kona, replacing it with clk-provider.h because
that driver doesn't use clk consumer APIs.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-05-15 13:21:37 -07:00
Linus Torvalds
4dbf09fea6 This pull request contains the following changes for MTD: 
MTD core changes:
 - New AFS partition parser
 - Update MAINTAINERS entry
 - Use of fall-throughs markers
 
 NAND core changes:
 - Support having the bad block markers in either the first, second or
   last page of a block. The combination of all three location is now
   possible.
 - Constification of NAND_OP_PARSER(_PATTERN) elements.
 - Generic NAND DT bindings changed to yaml format (can be used to
   check the proposed bindings. First platform to be fully supported:
   sunxi.
 - Stopped using several legacy hooks.
 - Preparation to use the generic NAND layer with the addition of
   several helpers and the removal of the struct nand_chip from generic
   functions.
 - Kconfig cleanup to prepare the introduction of external ECC engines
   support.
 - Fallthrough comments.
 - Introduction of the SPI-mem dirmap API for SPI-NAND devices.
 
 Raw NAND controller drivers changes:
 - nandsim:
   * Switch to ->exec-op().
 - meson:
   * Misc cleanups and fixes.
   * New OOB layout.
 - Sunxi:
   * A23/A33 NAND DMA support.
 - Ingenic:
   * Full reorganization and cleanup.
   * Clear separation between NAND controller and ECC engine.
   * Support JZ4740 an JZ4725B.
 - Denali:
   * Clear controller/chip separation.
   * ->exec_op() migration.
   * Various cleanups.
 - fsl_elbc:
   * Enable software ECC support.
 - Atmel:
   * Sam9x60 support.
 - GPMI:
   * Introduce the GPMI_IS_MXS() macro.
 - Various trivial/spelling/coding style fixes.
 
 SPI NOR core changes:
 - Print all JEDEC ID bytes on error
 - Fix comment of spi_nor_find_best_erase_type()
 - Add region locking flags for s25fl512s
 
 SPI NOR controller drivers changes:
 - intel-spi:
   * Avoid crossing 4K address boundary on read/write
   * Add support for Intel Comet Lake SPI serial flash
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAlzYiU4WHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wX1HEACay8s/mUEWcLO3JKWy6KiC3756
 1CGB3p5b621kKP6ooPWvV7UAv1Q2IKkLIwKaLE5W5FuKW9bVnN6H/yejVT8vYPK9
 /5AbcqbdNKfrnYBnfv3SHH8jSYo6HjwwNsF7OcR/yiXvk/JUFX+VJQdR01HEzz+Z
 TWzkm4n5+vat5pJSGBs7JwRBlatuiCHul7Lz2dZYkF/ZdGIQgL5ftOr1goLsr88+
 Hxn7Wmp3eBVZbQMf83BD7wf/Nv+oycToKBqklMZqMBEgK5mT6WDkT65HG4XMfzMz
 0CcPReMHlTZVqJHHZFgTSXVPJJHu8Nl4qmJIAaf1hnmvx7yFW6LD0C1zKpu6uwRm
 +qVpe/fTDArLCEwLouLND6Y9MC7kkERkDE3jwcwSQ/PZcE3kdHKwIhmJ/19utI8k
 zk9pWGAWvtuoY1b+dNFxT4YcUxrHOWSxYcUZHcZvQHQr7Bvxskg92P1fOU0wlgC/
 tXRtXUNCB5YsUU5x8Ph6+786dsCMcwCDoQQzwegecrbc6sK7n3KSYAcoNfv5ATwI
 C+Myoawul/XsxQvUyYbDIr8T4Yyda1BLs92XHxg1Di3kTC2m0OZL8sWJboQ7I/CI
 GkiJm5hFvzwniE+yrqE4n4jnCkoP5Y4kRtX70VDK3pIVDZFPs93lgYaYTFcfp93G
 scfn1MoI/bE7jDzpbA==
 =HXap
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "MTD core changes:
   - New AFS partition parser
   - Update MAINTAINERS entry
   - Use of fall-throughs markers

  NAND core changes:
   - Support having the bad block markers in either the first, second or
     last page of a block. The combination of all three location is now
     possible.
   - Constification of NAND_OP_PARSER(_PATTERN) elements.
   - Generic NAND DT bindings changed to yaml format (can be used to
     check the proposed bindings. First platform to be fully supported:
     sunxi.
   - Stopped using several legacy hooks.
   - Preparation to use the generic NAND layer with the addition of
     several helpers and the removal of the struct nand_chip from
     generic functions.
   - Kconfig cleanup to prepare the introduction of external ECC engines
     support.
   - Fallthrough comments.
   - Introduction of the SPI-mem dirmap API for SPI-NAND devices.

  Raw NAND controller drivers changes:
   - nandsim:
      - Switch to ->exec-op().
   - meson:
      - Misc cleanups and fixes.
      - New OOB layout.
   - Sunxi:
      - A23/A33 NAND DMA support.
   - Ingenic:
      - Full reorganization and cleanup.
      - Clear separation between NAND controller and ECC engine.
      - Support JZ4740 an JZ4725B.
   - Denali:
      - Clear controller/chip separation.
      - ->exec_op() migration.
      - Various cleanups.
   - fsl_elbc:
      - Enable software ECC support.
   - Atmel:
      - Sam9x60 support.
   - GPMI:
      - Introduce the GPMI_IS_MXS() macro.
   - Various trivial/spelling/coding style fixes.

  SPI NOR core changes:
   - Print all JEDEC ID bytes on error
   - Fix comment of spi_nor_find_best_erase_type()
   - Add region locking flags for s25fl512s

  SPI NOR controller drivers changes:
   - intel-spi:
      - Avoid crossing 4K address boundary on read/write
      - Add support for Intel Comet Lake SPI serial flash"

* tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
  mtd: part: fix incorrect format specifier for an unsigned long long
  mtd: lpddr_cmds: Mark expected switch fall-through
  mtd: phram: Mark expected switch fall-throughs
  mtd: cfi_cmdset_0002: Mark expected switch fall-throughs
  mtd: cfi_util: mark expected switch fall-throughs
  MAINTAINERS: MTD Git repository is hosted on kernel.org
  MAINTAINERS: Update jffs2 entry
  mtd: afs: add v2 partition parsing
  mtd: afs: factor the IIS read into partition parser
  mtd: afs: factor footer parsing into the v1 part parsing
  mtd: factor out v1 partition parsing
  mtd: afs: simplify partition detection
  mtd: afs: simplify partition parsing
  mtd: partitions: Add OF support to AFS partitions
  mtd: partitions: Add AFS partitions DT bindings
  mtd: afs: Move AFS partition parser to parsers subdir
  mtd: maps: Make uclinux_ram_map static
  mtd: maps: Allow MTD_PHYSMAP with MTD_RAM
  MAINTAINERS: Add myself as MTD maintainer
  MAINTAINERS: Remove my name from the MTD and NAND entries
  ...
 2019-05-12 17:57:52 -04:00
Olof Johansson
2195471254 memory: tegra: Changes for v5.2-rc1 
These are a set of fixes for various issues related to the Tegra memory
 controller.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAly4jYoTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoY47EACwjSLcEnX9tITvctAtZlXoWNhgPA4l
 hrBUCylLD4zzgY/9tWmmdgu0/bCWKRtr/mox4LRna3etUEQZVs/R010yx+3rNS5z
 qSKfdMfMWWjd8FFQknIKkrpQuoctyGdsE5IhKr4g5aHc9/alPFW6StJw90Llygrw
 li2/2yx4X7Lj4ywRBY6P480BOpCmwClKmeQhM85HQaISgYdYiDcO5EdqTtZNvhz6
 CzyV9Iv2fOgxIeBkrqI5J2Xyc3c3bxzkgzB8JJ8rTelUFGeTFyobwiXEDqjPc4cc
 K+7hUll+en1DppkOJvuzJFzDRmbA1Nuov23bbD/WhGm9InjcI99JHjdJVeGizT1d
 0HWTxorQ0/LzXJo8//W7qCGTKI9Jmdyi+0l1SJlOP7uUOYuPRfHIZCz9ZgCzLEKq
 zttp6xYmVIaAM2Bm7a+92tLV5tgxEG4tcWWnI6lsaKd5giNJet6+luEV10Ey6Hg6
 +rqI3TG6RbqoaBWtDxGWo5Yk4QKm8q/poIXWyo1fi566+WlVVJIZrXptZPxYF62h
 AjSKASrkw3jKFmnPKv30G/zb/I7NVbUe2VyDcch3arw+Eml4O07DziAbvfXddkkp
 5zjX+r0/ZnLBftBJLgSjmn68kU45+G0Do9PBfDnuKtkzeQJBmBg6dVpHsUfGs0VH
 KbbBLCu7DftNDQ==
 =C+Vy
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.2-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

memory: tegra: Changes for v5.2-rc1

These are a set of fixes for various issues related to the Tegra memory
controller.

* tag 'tegra-for-5.2-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: Fix a typos for "fdcdwr2" mc client
  Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
  memory: tegra: Replace readl-writel with mc_readl-mc_writel
  memory: tegra: Fix integer overflow on tick value calculation
  memory: tegra: Fix missed registers values latching
  memory: tegra: Properly spell "tegra"
  memory: tegra: Make terga20_mc_reset_ops static

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-04-28 23:35:18 -07:00
Edward Cragg
67a8d5b0fa memory: tegra: Fix a typos for "fdcdwr2" mc client 
Fix typo for fdcwr2 to fdcdwr2 to match the TRM.

Signed-off-by: Edward Cragg <drq.11235@gmail.com>
Signed-off-by: Kejia Hu <kejia.hu@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2019-04-18 11:51:17 +02:00
Dmitry Osipenko
48791f9722 memory: tegra: Replace readl-writel with mc_readl-mc_writel 
There is no need for a memory barriers on reading/writing of register
values as we only care about the read/write order, hence let's use the
common helpers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2019-04-18 11:36:10 +02:00
Dmitry Osipenko
b906c056b6 memory: tegra: Fix integer overflow on tick value calculation 
Multiplying the Memory Controller clock rate by the tick count results
in an integer overflow and in result the truncated tick value is being
programmed into hardware, such that the GR3D memory client performance is
reduced by two times.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2019-04-18 11:35:55 +02:00
Dmitry Osipenko
76b959a44c memory: tegra: Fix missed registers values latching 
Some of Memory Controller registers are shadowed and require latching in
order to copy assembly state into the active, MC_EMEM_ARB_CFG is one of
these registers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2019-04-18 11:35:38 +02:00
Thierry Reding
cb2b58391e memory: tegra: Properly spell "tegra" 
Rename all occurrences of "terga" to "tegra". It's an easy typo to make
and a difficult one to spot.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2019-04-11 17:58:41 +02:00
Yue Haibing
f2222a9e80 memory: tegra: Make terga20_mc_reset_ops static 
Fix sparse warning:

drivers/memory/tegra/tegra20.c:277:33: warning:
 symbol 'terga20_mc_reset_ops' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2019-04-11 10:53:47 +02:00
Dave Gerlach
6c110561eb memory: ti-emif-sram: Add ti_emif_run_hw_leveling for DDR3 hardware leveling 
In certain situations, such as when returning from low power modes, the
EMIF must re-run hardware leveling to properly restore DDR3 access.

This is accomplished by introducing a new ti-emif-sram-pm call,
ti_emif_run_hw_leveling, to check if DDR3 is in use and if so, trigger
the full write and read leveling processes.

Suggested-by: Brad Griffis <bgriffis@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2019-04-09 08:31:51 -07:00
Masahiro Yamada
ad4d1216f2 memory: squash drivers/memory/Makefile.asm-offsets 
drivers/memory/Makefile.asm-offsets is small enough, and included
from a single place.

Squash it into drivers/memory/Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
 2019-04-08 21:03:34 +09:00
Tudor Ambarus
3e0863dd4c memory: atmel-ebi: add sam9x60 EBI support 
The sam9x60 board defines the CCFG_EBICSA register under SFR,
and not as a MATRIX register, as previous boards do.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-03-21 16:45:04 +01:00
Tudor Ambarus
ad7bdbc847 memory: atmel-ebi: add generic name for ebi regmap 
The sam9x60 board defines the CCFG_EBICSA register under SFR,
and not as a MATRIX register, as previous boards do. Add a
more generic name for the EBI regmap as a prerequisite for
sam9x60 ebi support.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-03-21 16:44:59 +01:00
Dmitry Osipenko
f2dcded1be memory: tegra: Clean up error messages 
Make all messages to start with a lower case and don't unnecessarily go
over 80 chars in the code.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:13 +01:00
Dmitry Osipenko
33ea002aad memory: tegra: Do not ask for IRQ sharing 
Memory Controller driver never shared IRQ with any other driver and very
unlikely that it will. Hence there is no need to request IRQ sharing and
the corresponding flag can be dropped safely.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:13 +01:00
Dmitry Osipenko
568ece5bab memory: tegra: Do not try to probe SMMU on Tegra20 
Tegra20 doesn't have SMMU. Move out checking of the SMMU presence from
the SMMU driver into the Memory Controller driver. This change makes code
consistent in regards to how GART/SMMU presence checking is performed.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:13 +01:00
Dmitry Osipenko
ce2785a75d iommu/tegra: gart: Integrate with Memory Controller driver 
The device-tree binding has been changed. There is no separate GART device
anymore, it is squashed into the Memory Controller. Integrate GART module
with the MC in a way it is done for the SMMU on Tegra30+.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:12 +01:00
Dmitry Osipenko
45594c683e memory: tegra: Use relaxed versions of readl/writel 
There is no need for inserting of memory barriers to access registers of
Memory Controller. Hence use the relaxed versions of the accessors.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:12 +01:00
Dmitry Osipenko
59cd046f7f memory: tegra: Use of_device_get_match_data() 
There is no need to match device with the DT node since it was already
matched, use of_device_get_match_data() helper to get the match-data.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:12 +01:00
Dmitry Osipenko
b3bb6b858f memory: tegra: Read client ID on GART page fault 
With the device tree binding changes, now Memory Controller has access to
GART registers. Hence it is now possible to read client ID on GART page
fault to get information about what memory client causes the fault.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:11 +01:00
Dmitry Osipenko
96efa118c0 memory: tegra: Adapt to Tegra20 device-tree binding changes 
The tegra20-mc device-tree binding has been changed, GART has been
squashed into Memory Controller and now the clock property is mandatory
for Tegra20, the DT compatible has been changed as well. Adapt driver to
the DT changes.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:11 +01:00
Dmitry Osipenko
be4dbdec2b memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20 
This fixes irrelevant "tegra-mc 7000f000.memory-controller: no memory
timings for RAM code 0 registered" warning message during of kernels
boot-up on Tegra20.

Fixes: a8d502fd33 ("memory: tegra: Squash tegra20-mc into common tegra-mc driver")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2019-01-16 13:54:11 +01:00
Linus Torvalds
b23b0ea370 ARM: SoC: late updates 
A few updates that we merged late but are low risk for regressions for
 other platforms (and a few other straggling patches):
 
  - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
    here. They're for a driver for the PL353 SRAM controller and a build
    fix for the qualcomm scm driver.
  - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
    GPU, 256MB RAM, Wifi). This includes some acked platform-specific
    drivers (serial, etc). This also include DTs for two boards with this
    SoC, OrangePi 2G and OrangePi i86.
  - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
    video playback offload). This is the first i.MX 64-bit SoC.
  - Some minor updates to Samsung boards (adding a few peripherals in
    DTs).
  - Small rework for SMP bootup on STi platforms.
  - A couple of TEE driver fixes.
  - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
    enabled in defconfigs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwv4lAPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3JQsQAIcvwnI8rKPEskd20kNaj5bCUlG2hcIN/VoT
 scq1iCXpICOF53jBQvDoe48n+Ji4mI2VD7AIZD8XVppR+aHgpy8fkjX+uz8Ap0dG
 8B2y9vJ6nomrxKslnFEUk6LxpsaadpzTQDlcHAQvPdJxkvmMuA2b8LMGZhoAQ+dB
 lCw/qbjmoMEAV+dKXqRu62wwjZ10j4B7ex1XB1gnfjJYy+Splnd5fkdFCvd3wk+7
 BOH2iGROyLC0TC6ggqv45NNm6EykO9XqI5nq/3VHq9aBVJVWtFUQhDScjNf6qyYM
 mvUg6ZxmiTyIjhN+erttFXtxSKCH0BIdlBLZzaQ9W2XbTKMgzUlgK5GjQGqKCG6A
 QZHs9oe/TQuaHZ2ghMRbxcTWZC8Zdi1hYYa8fB7yNCZKnPNLRaA5P7O/3/s796B6
 DXpIHlU4lpyRdg26Zxh+FXYIXLsUYk9WNcwhjFbUQ/WXP3L9qf7FUU1EeSQeGDHU
 yRCE+kuKFs5FJnAZYXQ+0BCv0v8GFLMKTXDTbYtVFt0QDWVeeWwRt6gCOcHv1vBI
 IbZ0QLn1fzW2efgsXXB9i9VXO5AiP3EMx2A9Lqvrv+ufRXzQlBPbYZhN/Lp+BuDC
 moWdT5Cmye00uu35wY6H7Ycd+CO29dJ/B+hKbgqjyzFkZJiwWnPoeVQH2M1IkjOj
 IydIEbEo
 =qgZw
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull more ARM SoC updates from Olof Johansson:
 "A few updates that we merged late but are low risk for regressions for
  other platforms (and a few other straggling patches):

   - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
     here. They're for a driver for the PL353 SRAM controller and a
     build fix for the qualcomm scm driver.

   - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
     Vivante GPU, 256MB RAM, Wifi). This includes some acked
     platform-specific drivers (serial, etc). This also include DTs for
     two boards with this SoC, OrangePi 2G and OrangePi i86.

   - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
     video playback offload). This is the first i.MX 64-bit SoC.

   - Some minor updates to Samsung boards (adding a few peripherals in
     DTs).

   - Small rework for SMP bootup on STi platforms.

   - A couple of TEE driver fixes.

   - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
     enabled in defconfigs"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
  arm64: defconfig: Re-enable bcm2835-thermal driver
  MAINTAINERS: Add entry for RDA Micro SoC architecture
  tty: serial: Add RDA8810PL UART driver
  ARM: dts: rda8810pl: Add interrupt support for UART
  dt-bindings: serial: Document RDA Micro UART
  ARM: dts: rda8810pl: Add timer support
  ARM: dts: Add devicetree for OrangePi i96 board
  ARM: dts: Add devicetree for OrangePi 2G IoT board
  ARM: dts: Add devicetree for RDA8810PL SoC
  ARM: Prepare RDA8810PL SoC
  dt-bindings: arm: Document RDA8810PL and reference boards
  dt-bindings: Add RDA Micro vendor prefix
  ARM: sti: remove pen_release and boot_lock
  arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
  arm64: dts: imx8mq-evk: enable watchdog
  arm64: dts: imx8mq: add watchdog devices
  MAINTAINERS: add i.MX8 DT path to i.MX architecture
  arm64: add support for i.MX8M EVK board
  arm64: add basic DTS for i.MX8MQ
  ...
 2019-01-05 11:30:37 -08:00
Linus Torvalds
d36377c6eb ARM: SoC driver updates 
Misc driver updates for platforms, many of them power related.
 
  - Rockchip adds power domain support for rk3066 and rk3188
  - Amlogic adds a power measurement driver
  - Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
  - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
  - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
    stability of a handful of firmware/platform interfaces
  - PXA completes their conversion to dmaengine framework
  - Renesas does a bunch of PM cleanups across many platforms
  - Tegra adds support for suspend/resume on T186/T194, which includes
    some driver cleanups and addition of wake events
  - Tegra also adds a driver for memory controller (EMC) on Tegra2
  - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
  - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
 
  + misc cleanups across several platforms
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqd4APHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3HXoP/icWJTGrbf9R6T7r0RWB3xeV8ouTPMM8YM5C
 6wD4LkkjgZ16Hz/ellJ0Oug77LdnJ/ZI7jH2u0IcKRXr4sL94hEo11jAJLLtCHpt
 rGiItMuEDMhNFcAK/yREI6FtRqjNZhsTuR+gkcjzMnGLCaTA1+RwQNdugH0hh0fF
 z8C6tjN+fRIeS0wInBzR/402GcgRU0DIJrr0kmklS0u6tc2QW24ffv8ymvMiVO46
 l8VemmdxVZsBU2iehraPy6mSXsyTm04dNTuHnrIw3nE3kTJF7jMvpqI/euU1eZl6
 6EzrrCym8nC66IlqhHMBB427PK8sRqJTqwqSXO6e90AqiK4H2bMovXKiob/Psq+e
 yWqPOrAr8YBLqTgauvCzVm/xneT5rZM4N0BYhOk172Uk52qenNWDnqHj41A4CMSM
 /id3L1cHs5nf2qwuMncXvLX+Y2vO2n6cMmF8cDRLu592OBZRcVepUM0xoaSdZScv
 LJsP3jH3RRcY3L2rf7bY2Mitp48bDgZMZdw/viSHsFS+SVr225uNFALFDQ9kNEoZ
 2d9i9IvC7xOMhdVAX03U7DuRcpKXBPcv+arA57PiVvR4M1HeU7VvD4ayP5loVX2J
 GoDIKiPQitAsOKzyPyZ5Jw04lxio3xZbrbmmVzEH8uKWIV5omdiMnSrFsEfduRCT
 rU+Mqe2j
 =yEX2
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Misc driver updates for platforms, many of them power related.

   - Rockchip adds power domain support for rk3066 and rk3188

   - Amlogic adds a power measurement driver

   - Allwinner adds SRAM support for three platforms (F1C100, H5, A64
     C1)

   - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7

   - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
     stability of a handful of firmware/platform interfaces

   - PXA completes their conversion to dmaengine framework

   - Renesas does a bunch of PM cleanups across many platforms

   - Tegra adds support for suspend/resume on T186/T194, which includes
     some driver cleanups and addition of wake events

   - Tegra also adds a driver for memory controller (EMC) on Tegra2

   - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
     GPC

   - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60

  and misc cleanups across several platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: at91: add support in soc driver for new SAM9X60
  ARM: at91: add support in soc driver for LPDDR2 SiP
  memory: omap-gpmc: Use of_node_name_eq for node name comparisons
  bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  ARM: OMAP2+: Check also the first dts child for hwmod flags
  soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
  soc: imx: gpc: Increase GPC_CLK_MAX to 7
  soc: renesas: rcar-sysc: Fix power domain control after system resume
  soc: renesas: rcar-sysc: Merge PM Domain registration and linking
  soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
  soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
  dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
  dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
  dt-bindings: sram: Add Allwinner suniv F1C100s
  soc: sunxi: sram: Add support for the H5 SoC system control
  soc: sunxi: sram: Enable EMAC clock access for H3 variant
  soc: imx: gpcv2: add support for i.MX8MQ SoC
  soc: imx: gpcv2: move register access table to domain data
  soc: imx: gpcv2: prefix i.MX7 specific defines
  dmaengine: pxa: make the filter function internal
  ...
 2018-12-31 17:32:35 -08:00
Linus Torvalds
668c35f69c Kbuild updates for v4.21 
Kbuild core:
  - remove unneeded $(call cc-option,...) switches
  - consolidate Clang compiler flags into CLANG_FLAGS
  - announce the deprecation of SUBDIRS
  - fix single target build for external module
  - simplify the dependencies of 'prepare' stage targets
  - allow fixdep to directly write to .*.cmd files
  - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
  - change if_changed_rule to accept multi-line recipe
  - move .SECONDARY special target to scripts/Kbuild.include
  - remove redundant 'set -e'
  - improve parallel execution for CONFIG_HEADERS_CHECK
  - misc cleanups
 
 Treewide fixes and cleanups
  - set Clang flags correctly for PowerPC boot images
  - fix UML build error with CONFIG_GCC_PLUGINS
  - remove unneeded patterns from .gitignore files
  - refactor firmware/Makefile
  - remove unneeded rules for *offsets.s
  - avoid unneeded regeneration of intermediate .s files
  - clean up ./Kbuild
 
 Modpost:
  - remove unused -M, -K options
  - fix false positive warnings about section mismatch
  - use simple devtable lookup instead of linker magic
  - misc cleanups
 
 Coccinelle:
  - relax boolinit.cocci checks for overall consistency
  - fix warning messages of boolinit.cocci
 
 Other tools:
  - improve -dirty check of scripts/setlocalversion
  - add a tool to generate compile_commands.json from .*.cmd files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcJiVeAAoJED2LAQed4NsGXEMP/1fdkBfZGxYlxp4w1tEBeRKZ
 GInxxMfHiHZlu7nFPQ3k1mncczZjeLbnKcLaybnPmqBSfQe1F7tN0ux1sHtWkVfI
 DvqoKaHObZ3lEMEVxCHXQ2bKrN/j9nB2xSxzr4dvc9DscW8dwKElZuKVE7nHKdhl
 z70xsalxHGEGY6hptJrucbv8KTBOSleZ8Gaat79sEDkDSLCTjxXB3WcVMWqDT0M/
 IqN5QCwiPjZC3UCwuqq6+vnG1gyvDUORcbrVgHrBIKxLYAABYzugB5IlLpi8B31C
 ZUDmijSTandHd4SG5gw5uZoyYuK4YhZeI7g4yNyXSqnPurmcJxrGdpiuwRcE7xet
 5yB2uaNbAFO6Fbz4gUdDEvryA9IZEPPn1Z0Btfpp7UOxiWEqE61oHReCNdkiad94
 Oonl+ROZw5UOT3AZD3xCZTf9bTnQoCFccHTmnbaKqqSiDWxxLUXum7sNfnJ6GXEb
 fNQDuwuxtsPStaWoU93QNrGyl5e8jYTKFdphUCnZZ2/hE8ygoQ06PYmeBAk+UKfN
 UI2IqR8PHgmA97XJg+fHhbw6X4nQcPsg/usLqxGItAZNO2O4uXgaN24dOcHG74Bu
 2Dk/gQQB2sVB/Dxfmlaxvvj98MVg7IMtpusAT2bQ7miiSS3EqPFT8KQMZYLICWuZ
 u7QQe20yCho3ZULmsRwH
 =0PCt
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:
 "Kbuild core:
   - remove unneeded $(call cc-option,...) switches
   - consolidate Clang compiler flags into CLANG_FLAGS
   - announce the deprecation of SUBDIRS
   - fix single target build for external module
   - simplify the dependencies of 'prepare' stage targets
   - allow fixdep to directly write to .*.cmd files
   - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
   - change if_changed_rule to accept multi-line recipe
   - move .SECONDARY special target to scripts/Kbuild.include
   - remove redundant 'set -e'
   - improve parallel execution for CONFIG_HEADERS_CHECK
   - misc cleanups

  Treewide fixes and cleanups
   - set Clang flags correctly for PowerPC boot images
   - fix UML build error with CONFIG_GCC_PLUGINS
   - remove unneeded patterns from .gitignore files
   - refactor firmware/Makefile
   - remove unneeded rules for *offsets.s
   - avoid unneeded regeneration of intermediate .s files
   - clean up ./Kbuild

  Modpost:
   - remove unused -M, -K options
   - fix false positive warnings about section mismatch
   - use simple devtable lookup instead of linker magic
   - misc cleanups

  Coccinelle:
   - relax boolinit.cocci checks for overall consistency
   - fix warning messages of boolinit.cocci

  Other tools:
   - improve -dirty check of scripts/setlocalversion
   - add a tool to generate compile_commands.json from .*.cmd files"

* tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: remove unused cmd_gentimeconst
  kbuild: remove $(obj)/ prefixes in ./Kbuild
  treewide: add intermediate .s files to targets
  treewide: remove explicit rules for *offsets.s
  firmware: refactor firmware/Makefile
  firmware: remove unnecessary patterns from .gitignore
  scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore
  um: remove unused filechk_gen_header in Makefile
  scripts: add a tool to produce a compile_commands.json file
  kbuild: add -Werror=implicit-int flag unconditionally
  kbuild: add -Werror=strict-prototypes flag unconditionally
  kbuild: add -fno-PIE flag unconditionally
  scripts: coccinelle: Correct warning message
  scripts: coccinelle: only suggest true/false in files that already use them
  kbuild: handle part-of-module correctly for *.ll and *.symtypes
  kbuild: refactor part-of-module
  kbuild: refactor quiet_modtag
  kbuild: remove redundant quiet_modtag for $(obj-m)
  kbuild: refactor Makefile.asm-generic
  user/Makefile: Fix typo and capitalization in comment section
  ...
 2018-12-29 12:03:17 -08:00
Linus Torvalds
030672aea8 Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 
Pull Devicetree updates from Rob Herring:
 "The biggest highlight here is the start of using json-schema for DT
  bindings. Being able to validate bindings has been discussed for years
  with little progress.

   - Initial support for DT bindings using json-schema language. This is
     the start of converting DT bindings from free-form text to a
     structured format.

   - Reworking of initrd address initialization. This moves to using the
     phys address instead of virt addr in the DT parsing code. This
     rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
     rebuilding of lots of files.

   - Fix stale phandle entries in phandle cache

   - DT overlay validation improvements. This exposed several memory
     leak bugs which have been fixed.

   - Use node name and device_type helper functions in DT code

   - Last remaining conversions to using %pOFn printk specifier instead
     of device_node.name directly

   - Create new common RTC binding doc and move all trivial RTC devices
     out of trivial-devices.txt.

   - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
     PHY, and Xen shared memory

   - Update dtc to upstream version v1.4.7-57-gf267e674d145"

* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
  of: __of_detach_node() - remove node from phandle cache
  of: of_node_get()/of_node_put() nodes held in phandle cache
  gpio-omap.txt: add reg and interrupts properties
  dt-bindings: mrvl,intc: fix a trivial typo
  dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  dt-bindings: Convert trivial-devices.txt to json-schema
  dt-bindings: arm: mrvl: amend Browstone compatible string
  dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
  dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
  dt-bindings: arm: Add missing Xilinx boards
  dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
  dt-bindings: arm: Convert VIA board/soc bindings to json-schema
  dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
  dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
  dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
  dt-bindings: arm: Convert QCom board/soc bindings to json-schema
  dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
  dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
  dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
  dt-bindings: arm: Convert Altera board/soc bindings to json-schema
  ...
 2018-12-28 20:08:34 -08:00
Masahiro Yamada
2c667d77fc treewide: add intermediate .s files to targets 
Avoid unneeded recreation of these in the incremental build.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
 2018-12-23 10:12:08 +09:00
Masahiro Yamada
4d4b5c2e3b treewide: remove explicit rules for *offsets.s 
These explicit rules are unneeded because scripts/Makefile.build
provides a pattern rule to create %.s from %.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
 2018-12-23 10:12:03 +09:00
Arnd Bergmann
9f23b7ba63 ARM: Xilinx Zynq SoC patches for v5.0 
- Adding pl353 smc driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlwSdsQACgkQykllyylKDCFKnACeMTae7viBG3tFeGYXneHRvpxx
 HfUAn0WynFIgf6oUkWJchvaIpHejg4Az
 =5D/w
 -----END PGP SIGNATURE-----

Merge tag 'zynq-soc-for-v5.0' of https://github.com/Xilinx/linux-xlnx into next/drivers

ARM: Xilinx Zynq SoC patches for v5.0

- Adding pl353 smc driver

* tag 'zynq-soc-for-v5.0' of https://github.com/Xilinx/linux-xlnx:
  memory: pl353: Add driver for arm pl353 static memory controller
  dt-bindings: memory: Add pl353 smc controller devicetree binding information

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2018-12-20 16:10:36 +01:00
Linus Walleij
a0752e9c30 memory: omap-gpmc: Get the header of the enum 
Commit 21abf10381
("gpio: Pass a flag to gpiochip_request_own_desc()")
started to pass an enum gpiod_flags but this file is
not including the header file that defines that enum
and the compiler spits:

drivers/memory/omap-gpmc.c: In function
			    'gpmc_probe_generic_child':
drivers/memory/omap-gpmc.c:2174:9: error: type of formal
				   parameter 4 is incomplete
         0);
         ^

Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 21abf10381 ("gpio: Pass a flag to gpiochip_request_own_desc()")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2018-12-17 23:06:16 +01:00
Linus Walleij
21abf10381 gpio: Pass a flag to gpiochip_request_own_desc() 
Before things go out of hand, make it possible to pass
flags when requesting "own" descriptors from a gpio_chip.
This is necessary if the chip wants to request a GPIO with
active low semantics, for example.

Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Roger Quadros <rogerq@ti.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2018-12-14 14:24:33 +01:00
Naga Sureshkumar Relli
fee10bd226 memory: pl353: Add driver for arm pl353 static memory controller 
Add driver for arm pl353 static memory controller. This controller is used in
Xilinx Zynq SoC for interfacing the NAND and NOR/SRAM memory devices.

Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
 2018-12-13 16:07:04 +01:00
Olof Johansson
a6f119a069 Few more omap driver fixes and improvments for v4.21 merge window 
This series of changes improves the TI module flag handling to allow
 booting with older dts files until the module flags have been moved
 to the interconnect target module level. And there's a of_node_name_eq()
 clean-up patch from Rob Herring for the GPMC driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlwRTwcRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXPnBBAAqJ4gEf94aqX1xHEK25nP1A26Hu/0lsox
 vhF/K4fgyyFjQ3UiXPD5GCMsly/1B4ZHNE2q/wPj2OLf29qYf61yN4rmE5uXLZIq
 /nNeqNkl6/bfDwUGk1CEhPpMD107LUWl/smI2R8IgE1c+BFn5jGeHIlhueca6kBo
 QeQ+4opEJC/snYaz0eKa4GxLkTiABeV2xifQTKZbwHgBWUTxJHUx/DPZOZa8ClMl
 0nZmtKahAn4qpeshnlg6XrTWHIROvk4nGii6vYyRIGsSHopcTTULGNd4uz7fWd2A
 zGcNNXC5Bd5CjA3yvTn1HAq9WfUuWka2PORaWJRRGvnDS1nHXgMafAHBqdFN5Rv6
 aoHoxldNIO5ROmDxuogdrr7KCu3GCUq2CU+GxgPldnEdrU0vnU4DDfXKzgbFmc+X
 zY0u4kRn5bqzXVQU0LcYJFZ0jl/1qHCczuomeMj4+r3MxV0JmL3UuvHUXAiIk/w8
 TIusND01up06iNrDvLwMAQd2iECIBTFQoLhPSbVgY87rTRGgDUthJcPacyYOYXi9
 z0T4gW2n+L+Tz/RHKNab2VAU12hHRcA37VXHJiYiJjjvdC6GWGYTk2sD8s6q9Ntm
 MnN8ioB7OcphOX0TsKi4qnWVXBZ7xSKYKCl9r5RnGQWQcf1BCSBYfw5b/6vrnHxR
 W9QpaiYzLBs=
 =xcO5
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.21/driver-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

Few more omap driver fixes and improvments for v4.21 merge window

This series of changes improves the TI module flag handling to allow
booting with older dts files until the module flags have been moved
to the interconnect target module level. And there's a of_node_name_eq()
clean-up patch from Rob Herring for the GPMC driver.

* tag 'omap-for-v4.21/driver-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  memory: omap-gpmc: Use of_node_name_eq for node name comparisons
  bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  ARM: OMAP2+: Check also the first dts child for hwmod flags

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 14:20:55 -08:00
Rob Herring
c2ade654db memory: omap-gpmc: Use of_node_name_eq for node name comparisons 
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which this is.

Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2018-12-11 08:30:29 -08:00
Rob Herring
c86f98544f memory: Convert to using %pOFn instead of device_node.name 
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Roger Quadros <rogerq@ti.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
 2018-11-27 10:54:39 -06:00
Dmitry Osipenko
96e5da7c84 memory: tegra: Introduce Tegra20 EMC driver 
Introduce driver for the External Memory Controller (EMC) found on Tegra20
chips, which controls the external DRAM on the board. The purpose of this
driver is to program memory timing for external memory on the EMC clock
rate change.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-11-08 12:50:34 +01:00
Olof Johansson
1e25ee6d80 AT91 drivers for 4.20 
- use struct_size in atmel-ebi
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAluqDFYACgkQAyWl4gNJ
 NJIY1w//eeDj6dzDM6cEQ20Kq9AGNVgrWwZEbWciAMZpjnqsQK0Rv/vwxQjWZk2k
 rcTdWOYCYrPgpTDlTln2EfxJVtlF7J7wQTqtMK4qKAmCHcPgBDI6+Z56UgS+IC1T
 pqm1v6SK6dyZ/AOnHqJwboHogtFJSTqTnPl0neUKBHURuszRvF1rHtxYpWUHHUu7
 xrI7XkgwPP1IEdxnK1NQZI/VGYmYR9FzeR62w3zGP0vmcluW6pIzJBU8bGpP1Ny1
 0c9PM/nH00JGsxj/TQBBgQCrk6n6wxfdPcY3az5RShuGUq23qJ6DM+cs5or5OFgF
 AcXq2yih8WXD/qv0/22uPJtg/rGcDVvoD5VmoDhSt0hQ/EPMYdPn4csfOHEYjmY0
 mxLqrtOriUC9wLjq92qhukHSH2tmBHtNdElShYXm3gRaYAzZ8++I9UAM2SE4fmvw
 uAOeU1uA/70d1r1L6tVgFbBO9x7KT2VkoGLMNFuweXzh3F10KwDpgDpcpXmpmhrv
 EIjjVljG0lPvOIXXfA4e9mUOKv4spQPwi/ANbRTCEEX59ko1AaP3SXHQAqeLsWlP
 0vTEmj8owGjpAh54+LB1pPjSfvwf0Xr4MsaPpkLnzAxYJaxpug0riLXARZiIYpYo
 GJ48mQnOmZL5D44tZhKuulsxtDfWofzfpm6lCSmKgj6cQ9oV5lQ=
 =qeqW
 -----END PGP SIGNATURE-----

Merge tag 'at91-4.20-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into next/drivers

AT91 drivers for 4.20

 - use struct_size in atmel-ebi

* tag 'at91-4.20-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  memory: atmel-ebi: Use struct_size() in devm_kzalloc()

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-09-25 13:19:52 -07:00
Bartosz Golaszewski
6b45a2b1c0 memory: ti-aemif: fix a potential NULL-pointer dereference 
Platform data pointer may be NULL. We check it everywhere but in one
place. Fix it.

Fixes: 8af70cd2ca ("memory: aemif: add support for board files")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-09-06 10:04:07 -07:00
Gustavo A. R. Silva
f62df676d7 memory: atmel-ebi: Use struct_size() in devm_kzalloc() 
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
	int stuff;
        void *entry[];
};

instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
 2018-08-27 23:10:31 +02:00
Linus Torvalds
f3ea496213 ARM: SoC driver updates 
Some of the larger changes this merge window:
  - Removal of drivers for Exynos5440, a Samsung SoC that never saw
    widespread use.
  - Uniphier support for USB3 and SPI reset handling
  - Syste control and SRAM drivers and bindings for Allwinner platforms
  - Qualcomm AOSS (Always-on subsystem) reset controller drivers
  - Raspberry Pi hwmon driver for voltage
  - Mediatek pwrap (pmic) support for MT6797 SoC
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlt+MMkPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3pB4QAIj7iVxSKEQFz65iXLTfMJKFZ9TSvRgWSDyE
 CHF+WOQGTnxkvySEHSw/SNqDM+Bas8ijR8b4vWzsXJFB+3HA0ZTGLU379/af1zCE
 9k8QjyIWtRWKX9fo7qCHVXlMfxGbOdbCOsh4jnmHqEIDxCHXpIiJRfvUbKIXGpfn
 tw6QpM70vm6Q6AdKwzmDbMCYnQAMWxBK/G/Q7BfRG+IYWYjFGbiWIc9BV9Ki8+nE
 3235ISaTHvAHodoec8tpLxv34GsOP4RCqscGYEuCf22RYfWva4S9e4yoWT8qPoIl
 IHWNsE3YWjksqpt9rj9Pie/PycthO4E4BUPMtqjMbC2OyKFgVsAcHrmToSdd+7ob
 t3VNM6RVl8xyWSRlm5ioev15CCOeWRi1nUT7m3UEBWpQ6ihJVpbjf1vVxZRW/E0t
 cgC+XzjSg26sWx1bSH9lGPFytOblAcZ04GG/Kpz02MmTgMiTdODFZ67AsqtdeQS7
 a9wpaQ+DgTqU0VcQx8Kdq8uy9MOztkhXn5yO8fEWjpm0lPcxjhJS4EpN+Ru2T7/Z
 AMuy5lRJfQzAPU9kY7TE0yZ07pgpZgh7LlWOoKtGD7UklzXVVZrVlpn7bApRN5vg
 ZLze5OiEiIF5gIiRC8sIyQ9TZdvg4NqwebCqspINixqs7iIpB7TG93WQcy82osSE
 TXhtx4Sy
 =ZjwY
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Some of the larger changes this merge window:

   - Removal of drivers for Exynos5440, a Samsung SoC that never saw
     widespread use.

   - Uniphier support for USB3 and SPI reset handling

   - Syste control and SRAM drivers and bindings for Allwinner platforms

   - Qualcomm AOSS (Always-on subsystem) reset controller drivers

   - Raspberry Pi hwmon driver for voltage

   - Mediatek pwrap (pmic) support for MT6797 SoC"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
  drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  soc: fsl: cleanup Kconfig menu
  soc: fsl: dpio: Convert DPIO documentation to .rst
  staging: fsl-mc: Remove remaining files
  staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
  staging: fsl-dpaa2: eth: move generic FD defines to DPIO
  soc: fsl: qe: gpio: Add qe_gpio_set_multiple
  usb: host: exynos: Remove support for Exynos5440
  clk: samsung: Remove support for Exynos5440
  soc: sunxi: Add the A13, A23 and H3 system control compatibles
  reset: uniphier: add reset control support for SPI
  cpufreq: exynos: Remove support for Exynos5440
  ata: ahci-platform: Remove support for Exynos5440
  soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
  soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
  soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
  soc: mediatek: pwrap: fix cipher init setting error
  dt-bindings: pwrap: mediatek: add pwrap support for MT6797
  reset: uniphier: add USB3 core reset control
  dt-bindings: reset: uniphier: add USB3 core reset support
  ...
 2018-08-23 13:52:46 -07:00
Linus Torvalds
d5acba26bf Char/Misc driver patches for 4.19-rc1 
Here is the bit set of char/misc drivers for 4.19-rc1
 
 There is a lot here, much more than normal, seems like everyone is
 writing new driver subsystems these days...  Anyway, major things here
 are:
 	- new FSI driver subsystem, yet-another-powerpc low-level
 	  hardware bus
 	- gnss, finally an in-kernel GPS subsystem to try to tame all of
 	  the crazy out-of-tree drivers that have been floating around
 	  for years, combined with some really hacky userspace
 	  implementations.  This is only for GNSS receivers, but you
 	  have to start somewhere, and this is great to see.
 Other than that, there are new slimbus drivers, new coresight drivers,
 new fpga drivers, and loads of DT bindings for all of these and existing
 drivers.
 
 Full details of everything is in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
 cvW7a+McOoKz/MGmEKsi
 =TNfn
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...
 2018-08-18 11:04:51 -07:00
Anders Roxell
16909c81c6 drivers/memory/Kconfig: Add CONFIG_OF dependency 
JZ4780_NEMC doesn't depend on OF, and if OF isn't enabled we get this
error:
drivers/memory/jz4780-nemc.c: In function ‘jz4780_nemc_num_banks’:
drivers/memory/jz4780-nemc.c:72:10: error: implicit declaration of
 function ‘of_read_number’; did you mean ‘down_read_nested’?
 [-Werror=implicit-function-declaration]
   bank = of_read_number(prop, 1);
          ^~~~~~~~~~~~~~
          down_read_nested

Make JZ4780_NEMC depend on OF.

Fixes: ab99e11062 ("memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-07-31 09:46:06 +02:00
Boris Brezillon
ab99e11062 memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y 
It just makes maintainers' life easier by allowing them to compile-test
this driver without having MACH_JZ4780 enabled.

We also need to add a dependency on HAS_IOMEM to make sure the
driver compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-07-19 23:14:11 +02:00
Boris Brezillon
b30a2bd4ee memory: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y 
It just makes maintainers' life easier by allowing them to compile-test
this driver without having FSL_SOC, ARCH_LAYERSCAPE or SOC_LS1021A
enabled.

We also need to add a dependency on HAS_IOMEM to make sure the
driver compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-07-18 10:10:21 +02:00
Olof Johansson
7af239f0c9 memory: tegra: Changes for v4.19-rc1 
This contains a single fix for the initialization order of the various
 parts of the Tegra memory controller driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAltHcXYTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoduGD/4z8pv473qajbb4fEyULrbJR5byEN+U
 1jco6IpvOj/WPWEedAjZkDI7rTmJ3s2qSfM2rGxQw/PEw7XG7efULUxPk9ZHDzIo
 QdNn8N3JcL/DrsoP2DWRSgD2rSKzZQl2DCjwHgYFgqiRdx9iNsS3FmjNl2XucAZm
 ZarFgTGl+BWOv1NszFhhHI3t4W06uAc1QQUq7gMzAvNo8MflrqWu+2NjUJmaalnV
 LTrtO95cuX/u9zavFxJEnriWpqNTYhdeeCvXX69Q4onQ3s7N6TChcfsCrYewuXEr
 2CpLqhJg79Xcmu/DwKFwhwqiWUDa7IwBqo+vondHvyAcFRrzXS9xwu5JziHzgWtk
 WEb2xsE8eAWZl+lGjkjLUIBRoTer/LWJdq9wV4cvAdJCP0rwbDW2pbptjEiYT6HX
 hcBESouqlolSBoHJUuKbIbucg5gkkvz5mBdUB/sPvbFDHWBWIT9KcfazLu81CjFr
 C5Lqkri+TPJnOlWObVKQHWvBIORTY01lnBttBAVkaEl+5FCdjfz9GSNaQq88unWU
 4FDu3Dn+HtsPXLVl7CeuTdLYsdblLPFeJC9lvOcepOS678fOofl1Ga0ZY99bEMcy
 M85D7vkfd8/8Xg62kOKgEXtfIm1Kkrl2U5PW0BrKgUq+vFLbPjz/5uqGyL0jgZSG
 cMNew5daRkiMhw==
 =7m8q
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.19-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

memory: tegra: Changes for v4.19-rc1

This contains a single fix for the initialization order of the various
parts of the Tegra memory controller driver.

* tag 'tegra-for-4.19-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: Correct driver probe order

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-07-14 14:39:55 -07:00
Dmitry Osipenko
1662dd641f memory: tegra: Correct driver probe order 
The Reset Controller should be registered in the end of probe, otherwise
Memory Controller device goes away if IRQ requesting fails and the Reset
Controller stays registered. To avoid having to unwind the MC probing in
a case of SMMU probe failure, let's simply print the error message without
failing the MC probe. This allows us to just move the Reset Controller
registering before the SMMU registration, reducing code churning. Also
let's not fail MC probe in a case of Reset Controller registration failure
as it doesn't prevent the MC driver to work.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-07-10 17:29:15 +02:00
Randy Dunlap
ac3167257b headers: separate linux/mod_devicetable.h from linux/platform_device.h 
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel.  It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.

   4146 #include <linux/platform_device.h>

After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.

    225 #include <linux/mod_devicetable.h>

This patch was build-tested on 20 different arch-es.

It also makes these drivers SubmitChecklist#1 compliant.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2018-07-07 17:52:26 +02:00
Dave Gerlach
38853979e6 memory: ti-emif-sram: Add resume function to recopy sram code 
After an RTC+DDR cycle we lose sram context so emif pm functions present
in sram are lost. We can check if the first byte of the original
code in DDR contains the same first byte as the code in sram, and if
they do not match we know we have lost context and must recopy the
functions to the previous address to maintain PM functionality.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
 2018-06-26 10:05:17 -07:00
Linus Torvalds
b08fc5277a - Error path bug fix for overflow tests (Dan) 
- Additional struct_size() conversions (Matthew, Kees)
 - Explicitly reported overflow fixes (Silvio, Kees)
 - Add missing kvcalloc() function (Kees)
 - Treewide conversions of allocators to use either 2-factor argument
   variant when available, or array_size() and array3_size() as needed (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsgVtMWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhsJEACLYe2EbwLFJz7emOT1KUGK5R1b
 oVxJog0893WyMqgk9XBlA2lvTBRBYzR3tzsadfYo87L3VOBzazUv0YZaweJb65sF
 bAvxW3nY06brhKKwTRed1PrMa1iG9R63WISnNAuZAq7+79mN6YgW4G6YSAEF9lW7
 oPJoPw93YxcI8JcG+dA8BC9w7pJFKooZH4gvLUSUNl5XKr8Ru5YnWcV8F+8M4vZI
 EJtXFmdlmxAledUPxTSCIojO8m/tNOjYTreBJt9K1DXKY6UcgAdhk75TRLEsp38P
 fPvMigYQpBDnYz2pi9ourTgvZLkffK1OBZ46PPt8BgUZVf70D6CBg10vK47KO6N2
 zreloxkMTrz5XohyjfNjYFRkyyuwV2sSVrRJqF4dpyJ4NJQRjvyywxIP4Myifwlb
 ONipCM1EjvQjaEUbdcqKgvlooMdhcyxfshqJWjHzXB6BL22uPzq5jHXXugz8/ol8
 tOSM2FuJ2sBLQso+szhisxtMd11PihzIZK9BfxEG3du+/hlI+2XgN7hnmlXuA2k3
 BUW6BSDhab41HNd6pp50bDJnL0uKPWyFC6hqSNZw+GOIb46jfFcQqnCB3VZGCwj3
 LH53Be1XlUrttc/NrtkvVhm4bdxtfsp4F7nsPFNDuHvYNkalAVoC3An0BzOibtkh
 AtfvEeaPHaOyD8/h2Q==
 =zUUp
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull more overflow updates from Kees Cook:
 "The rest of the overflow changes for v4.18-rc1.

  This includes the explicit overflow fixes from Silvio, further
  struct_size() conversions from Matthew, and a bug fix from Dan.

  But the bulk of it is the treewide conversions to use either the
  2-factor argument allocators (e.g. kmalloc(a * b, ...) into
  kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
  b) into vmalloc(array_size(a, b)).

  Coccinelle was fighting me on several fronts, so I've done a bunch of
  manual whitespace updates in the patches as well.

  Summary:

   - Error path bug fix for overflow tests (Dan)

   - Additional struct_size() conversions (Matthew, Kees)

   - Explicitly reported overflow fixes (Silvio, Kees)

   - Add missing kvcalloc() function (Kees)

   - Treewide conversions of allocators to use either 2-factor argument
     variant when available, or array_size() and array3_size() as needed
     (Kees)"

* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
  treewide: Use array_size in f2fs_kvzalloc()
  treewide: Use array_size() in f2fs_kzalloc()
  treewide: Use array_size() in f2fs_kmalloc()
  treewide: Use array_size() in sock_kmalloc()
  treewide: Use array_size() in kvzalloc_node()
  treewide: Use array_size() in vzalloc_node()
  treewide: Use array_size() in vzalloc()
  treewide: Use array_size() in vmalloc()
  treewide: devm_kzalloc() -> devm_kcalloc()
  treewide: devm_kmalloc() -> devm_kmalloc_array()
  treewide: kvzalloc() -> kvcalloc()
  treewide: kvmalloc() -> kvmalloc_array()
  treewide: kzalloc_node() -> kcalloc_node()
  treewide: kzalloc() -> kcalloc()
  treewide: kmalloc() -> kmalloc_array()
  mm: Introduce kvcalloc()
  video: uvesafb: Fix integer overflow in allocation
  UBIFS: Fix potential integer overflow in allocation
  leds: Use struct_size() in allocation
  Convert intel uncore to struct_size
  ...
 2018-06-12 18:28:00 -07:00
Kees Cook
a86854d0c5 treewide: devm_kzalloc() -> devm_kcalloc() 
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:

        devm_kzalloc(handle, a * b, gfp)

with:
        devm_kcalloc(handle, a * b, gfp)

as well as handling cases of:

        devm_kzalloc(handle, a * b * c, gfp)

with:

        devm_kzalloc(handle, array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        devm_kcalloc(handle, array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        devm_kzalloc(handle, 4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@

(
  devm_kzalloc(HANDLE,
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  devm_kzalloc(HANDLE,
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@

- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@

(
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
  devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * E2
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
 2018-06-12 16:19:22 -07:00
Olof Johansson
6874f9de65 memory: tegra: Changes for v4.18-rc1 
This contains some cleanup of the memory controller driver as well as
 unification work to share more code between Tegra20 and later SoC
 generations. Also included are an implementation for the hot resets
 functionality by the memory controller which is required to properly
 reset busy hardware.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlr/O5kTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYBuD/0StspIEG9GK8xOdf93unbziinCZ2DG
 e+xae7l5VfC2VsG5MgyYCr0ugOThdHHzqqsit3uHBXe9cUlNaL6YKyAiTIT7HFNM
 a0lnE+I++p0bL0GqMa/9l9jWnheR5iKnZYratyKJjtmEd9ljDcgo4Xn0lUonf3NS
 9gmI/2qiqkry+pLRafN65H6mbK6JyQ07xZAqd322S8aVkKx10L+GwzMjj6K342zu
 KPJd5B2mpCkaAc9maFOY5zcljaRBNU5mFGJEzhdzrq6KXcfDnZxyufVX80RhP9vO
 9RQJyFVsFiBgH59YPBc72X8Nu0Cc/14jTH1rE55R4239y96cJ/LuniYtHcWqumuL
 OQgsMfslO8RJ9/XBy/0UEznx1hnDJGfT7s2SRfgCsGnKegvcSw1IASI7xA+49DIR
 ZpVLEIB3Htq5DGymQrDG99z6tccMV5PJNEOjDhrh74DSXy9S/6Hl9UAoX3455/7Y
 zP2B5yUfaCnipwWXSowzmkXRKfCrHus1o//YfyarhmRVeDNeMkdbPcxGFZL7Y+MC
 PPorRu+WdKKzcY+8xmQig+UY2K3thpYSNG1D8vZLC6Dv3r06qGAk2vy9pV2bYG86
 4FG9Ory36XK/5fnfLTvTPnbguRNI1y/hbQ7XTTJcnxCvUqNkT7bAgspPfn0gkY+1
 Uh8Jm57WooiwHQ==
 =uVPT
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.18-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

memory: tegra: Changes for v4.18-rc1

This contains some cleanup of the memory controller driver as well as
unification work to share more code between Tegra20 and later SoC
generations. Also included are an implementation for the hot resets
functionality by the memory controller which is required to properly
reset busy hardware.

* tag 'tegra-for-4.18-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions
  memory: tegra: Remove Tegra114 SATA and AFI reset definitions
  memory: tegra: Register SMMU after MC driver became ready
  memory: tegra: Add Tegra210 memory controller hot resets
  memory: tegra: Add Tegra124 memory controller hot resets
  memory: tegra: Add Tegra114 memory controller hot resets
  memory: tegra: Add Tegra30 memory controller hot resets
  memory: tegra: Add Tegra20 memory controller hot resets
  memory: tegra: Introduce memory client hot reset
  memory: tegra: Squash tegra20-mc into common tegra-mc driver
  memory: tegra: Remove unused headers inclusions
  memory: tegra: Apply interrupts mask per SoC
  memory: tegra: Setup interrupts mask before requesting IRQ
  memory: tegra: Do not handle spurious interrupts
  dt-bindings: memory: tegra: Add hot resets definitions

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-05-25 05:14:34 -07:00
Dmitry Osipenko
5fd80cf74e memory: tegra: Remove Tegra114 SATA and AFI reset definitions 
Tegra114 doesn't have SATA nor PCIe, but TRM seems erroneously document
them.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-05-18 22:45:01 +02:00
Dmitry Osipenko
45a81df06e memory: tegra: Register SMMU after MC driver became ready 
Memory Controller driver invokes SMMU driver registration and MC's
registers mapping is shared with SMMU. This mapping goes away if MC
driver probing fails after SMMU registration.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-05-18 12:31:55 +02:00
Olof Johansson
4e7383e14e This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes 
for 4.18, please pull the following:
 
 - Florian removes the synthetic struct device in the DPFE driver which
   was used to attach sysfs attributes and uses the platform_device we are
   probed from instead.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJa9cwTAAoJEIfQlpxEBwcE9lcQANFIweVf91Y6+HxD/Tm+j9Zr
 xBCsBWA/YYbSGXuXCzLzMY+tOEstAThxptWMDjmL801uhpBW/2w26DhoNIYz1gpg
 cfWy0c+984HUdmtyoyoM1tnWZ++W9bzugC9ELRT/QNtKUD3dbBNpFnSB1UmI/WPU
 ibxwDHjRvpslASdVq2+FFj/OVQx4VF+J5OPSKRJjaf8yN5xaaKkyKbpf31mNLsVE
 zCnzc78Awyv6+As0hSyQaFI98ipkWIkrQfhKzXAx01ymqj8b7TaIBgRevTt3Oaj2
 gAQa4cNlvV4FyrFoTmUO63GDBXbSldSDgGhRkXCA+dHEyzFLGGER/epAnrdsxfOT
 eBPliwcvss6P8jXNAGUxX18BHrHqLllsLyWpYs16/m8hc4foytdI4KX6XmAfQY7F
 ThKzu2N9uElpDaqN33hzl7wtkVqJLnFFmQDNR38pf/txgtPpHJ3i2DVMyF9Bo4e5
 QAI1PMoEOxGNspidtLbZdKStvn2mYXP6j08yNcMfo9HCznOOjFEUJFlcB4Ne+Kdc
 fxt+Ivh3l5rSM5kYqH2F0zuUJax4dYG72CdYlJ4P2JKagpPTYqsLQSC72BePpMTu
 YIupobgxY92Kq86bHqIHDC8YWDegB7Js6JNXIk/aR6ffrAs5wH360M9SLfDsC9yS
 0xOhhMTZCSPqKflH1NGg
 =33Be
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.18/drivers' of https://github.com/Broadcom/stblinux into next/drivers

This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.18, please pull the following:

- Florian removes the synthetic struct device in the DPFE driver which
  was used to attach sysfs attributes and uses the platform_device we are
  probed from instead.

* tag 'arm-soc/for-4.18/drivers' of https://github.com/Broadcom/stblinux:
  memory: brcmstb: dpfe: Remove need for dpfe_dev

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-05-14 13:27:02 -07:00
Olof Johansson
7a0b8610d3 OMAP-GPMC: driver updates for v4.18 
* get rid of a redundant NULL check in gpmc_probe_dt_children()
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJa9RqJAAoJENJaa9O+djCTGgAP/iNTVtHRSzY3hQNpkwSriYql
 DEpg+itamBMwMgdOP823J4t8qS6BdfvzmLZckDM5sKrNzXDXl0P5489H30+9Qa2X
 ZLsRTLayfavNRrLEVxqlcmSehzh6/NcQW1OfjcC6B+nfqdkp7C77+epCOzQVp7Dx
 OJWfA2GYgM9PfrWJE+4czEZZuJKlCEM8mmU8ohCO+Q0XOFCexntPjlzW2I7juVg5
 0LPSSNbSQBCpiIb+g0wDjVCONe+XtgFWzrYrJyCxex2tH20cjGJX3VyntYRdTT8n
 JbmJi4xIBL7JyqmOxkJdYfthlw1XfHzPCfijcVx9Syudxg6fNZh9tai+DI9woiLX
 RLrlcqgU0DaWf0Anur28enygxuovPIxqVgVDiZd0UDj2sgynZOT1P2BsyXMBqBSa
 TxnyhWmkMmiXgEA3EYK84S2swDSrR8msiqjP9pYSvTU215Xa8X6XrJxLMME2uyKq
 Fr21RUC3uDVPgtAxttuf4sRmyOE5gGacFEA+JtNVpGtJa8xwxpEKGssVLSo1LJ4g
 E4QBt+2Vj6VJOB7yfOJtNsoiNlkTKnfawJERCOaVhWHp6toMmNFdu4a2Pw1tACgi
 98fLtCt5YyskjqRBHGrjBBa4P/E7xAyIUJah9EiUjE1jjKaWEGeigi/AFgt0fHju
 znh6bRKHpxr2+06r/8Us
 =B4jo
 -----END PGP SIGNATURE-----

Merge tag 'gpmc-omap-for-v4.18' of https://github.com/rogerq/linux into next/drivers

OMAP-GPMC: driver updates for v4.18
* get rid of a redundant NULL check in gpmc_probe_dt_children()

* tag 'gpmc-omap-for-v4.18' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Avoid redundant NULL check

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-05-14 01:29:15 -07:00
Olof Johansson
71fe67e0e2 ARM: SOC driver update for 4.18 
- AEMIF driver update to support board files and remove
    need of mach-davinci aemif code
  - Use percpu counters for qmss datapath stats
  - License update for TI SCI
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJa8hefAAoJEHJsHOdBp5c/Z7gP/RJcEM/bUrmIj+iAf+h/Azp3
 f5KiFrBmwIcRPC4VULRL06uuRgiExWcDY6j3gheKdJzqHOKprRysdRDEkHLKnmoy
 EGUS2HKo6Bbig/G/lMy9YhmrOEqm2tsh008TwSj6V8ZHSXgdyd3R4Kbe0YM5bbVp
 TMUMTuGN6EP1RMAMk4zh9jGxCSDgfzI6FZd2Yf8pxAhsIAa7ssbzGGT85p3lBP3T
 PTQ5h/aMP833gf7Ir7z5wEdqvdmfLVIxyu2bOzbP+rPUnaUGI9E2qaKPgiz8Tw5W
 sCICBv2ELauoSyLLUaJ8BOVU6pI07Cm0DisdUmhuHex3EOm+U1Leg3XX5pyJ/Sh7
 sGeLfFpMYWflinp6owq3J/z4sOQCq6pHugfS+6H3k6+uBX1S4RVkhcLda/Z0zz7p
 LAGpFkSSHP1vFtQLU7phSu7m+v4KqtnUEDZelCLroJIkncpwotYaAjisIOxOif0j
 WgNCHMNdTF/oxGCWBxqk5GH3bvZg53uUK9iy+WjgfKLOe+2RKEM+MbPpmVBWJxag
 ZV9vwRpgmi/5I/cUNt7sTJ8ine66I5N68ps4K6e8I8JNHqBqpcZFQwnZ+x+Ib0l9
 vv3unT92f/7q2XtIGkxkDNgqnsLF/b6sxqmy8jnNme/FIOWPX4iq2TGSnZ151FQ1
 nH3qGLDyn3UAEdBXMnkb
 =uqd7
 -----END PGP SIGNATURE-----

Merge tag 'soc_drivers_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers

ARM: SOC driver update for 4.18

 - AEMIF driver update to support board files and remove
   need of mach-davinci aemif code
 - Use percpu counters for qmss datapath stats
 - License update for TI SCI

* tag 'soc_drivers_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  firmware: ti_sci: Switch to SPDX Licensing
  soc: ti: knav_qmss: Use percpu instead atomic for stats counter
  memory: aemif: add support for board files
  memory: aemif: don't rely on kbuild for driver's name

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-05-14 01:27:47 -07:00
Florian Fainelli
b1d0973e9a memory: brcmstb: dpfe: Remove need for dpfe_dev 
We can hook sysfs objects to the parent platform device that we are
created from, no need to have a synthetic dpfe_dev just for that. This
incidentally removes the need for having an index, since we are
guaranteed to have an unique path in the sysfs hiearchy.

Acked-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2018-05-09 12:15:26 -07:00
Thierry Reding
273d760060 memory: tegra: Add Tegra210 memory controller hot resets 
Define the table of memory controller hot resets for Tegra210.

Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-30 10:12:21 +02:00
Dmitry Osipenko
1b19b0561d memory: tegra: Add Tegra124 memory controller hot resets 
Define the table of memory controller hot resets for Tegra124.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-30 10:12:21 +02:00
Dmitry Osipenko
3788c4ed4a memory: tegra: Add Tegra114 memory controller hot resets 
Define the table of memory controller hot resets for Tegra114.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-30 10:12:21 +02:00
Dmitry Osipenko
ec4e1f0d66 memory: tegra: Add Tegra30 memory controller hot resets 
Define the table of memory controller hot resets for Tegra30.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-30 10:12:21 +02:00
Dmitry Osipenko
cb557757e1 memory: tegra: Add Tegra20 memory controller hot resets 
Define the table of memory controller hot resets for Tegra20 and add
specific to Tegra20 hot reset operations.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-30 10:12:21 +02:00
Dmitry Osipenko
20e92462cd memory: tegra: Introduce memory client hot reset 
In order to reset busy HW properly, memory controller needs to be
involved, otherwise it is possible to get corrupted memory or hang machine
if HW was reset during DMA. Introduce memory client 'hot reset' that will
be used for resetting of busy HW.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-30 10:12:21 +02:00
Dmitry Osipenko
a8d502fd33 memory: tegra: Squash tegra20-mc into common tegra-mc driver 
Tegra30+ has some minor differences in registers / bits layout compared
to Tegra20. Let's squash Tegra20 driver into the common tegra-mc driver
in a preparation for the upcoming MC hot reset controls implementation,
avoiding code duplication.

Note that this currently doesn't report the value of MC_GART_ERROR_REQ
because it is located within the GART register area and cannot be safely
accessed from the MC driver (this happens to work only by accident). The
proper solution is to integrate the GART driver with the MC driver, much
like is done for the Tegra SMMU, but that is an invasive change and will
be part of a separate patch series.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-30 10:10:00 +02:00
Dmitry Osipenko
85dce8918f memory: tegra: Remove unused headers inclusions 
Tegra210 contains some unused leftover headers, remove them for
consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-27 11:23:52 +02:00
Dmitry Osipenko
1c74d5c0de memory: tegra: Apply interrupts mask per SoC 
Currently we are enabling handling of interrupts specific to Tegra124+
which happen to overlap with previous generations. Let's specify
interrupts mask per SoC generation for consistency and in a preparation
of squashing of Tegra20 driver into the common one that will enable
handling of GART faults which may be undesirable by newer generations.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-27 11:23:04 +02:00
Dmitry Osipenko
db4a9c1935 memory: tegra: Setup interrupts mask before requesting IRQ 
This avoids unwanted interrupt during MC driver probe.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-27 11:22:19 +02:00
Dmitry Osipenko
bf3fbdfbec memory: tegra: Do not handle spurious interrupts 
The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the
mask to the interrupt status and don't handle interrupts that MC driver
haven't asked for. Kernel would disable spurious MC IRQ and report the
error. This would happen only in a case of a very severe bug.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-04-27 11:21:52 +02:00
Roger Quadros
d507178f2e memory: omap-gpmc: Avoid redundant NULL check 
child->name cannot be NULL as we're already checking for it
in gpmc_probe_dt_children()

Signed-off-by: Roger Quadros <rogerq@ti.com>
 2018-04-24 10:30:52 +03:00
Bartosz Golaszewski
8af70cd2ca memory: aemif: add support for board files 
Currently aemif is supported in two places separately. By the platform
driver in drivers/memory and by a hand crafted driver in mach-davinci.

We want to drop the latter but also keep the legacy mode. Add support
for board files to the aemif driver.

The new structure in platform data currently only contains the chip
select number, since currently existing users don't require anything
else, but it can be extended in the future.

While extending the platform data struct, add kernel docs describing
its members.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
 2018-04-20 10:14:27 -07:00
Bartosz Golaszewski
f12cb8e274 memory: aemif: don't rely on kbuild for driver's name 
We want to use aemif from board files. Use a static name in the
driver's code.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
 2018-04-20 10:14:27 -07:00
Dave Gerlach
5692fceebe ARM: OMAP2+: Fix build when using split object directories 
The sleep33xx and sleep43xx files should not depend on a header file
generated in drivers/memory. Remove this dependency and instead allow
both drivers/memory and arch/arm/mach-omap2 to generate all macros
needed in headers local to their own paths.

This fixes an issue where the build fail will when using O= to set a
split object directory and arch/arm/mach-omap2 is built before
drivers/memory with the following error:

.../drivers/memory/emif-asm-offsets.c:1:0: fatal error: can't open
drivers/memory/emif-asm-offsets.s for writing: No such file or directory
compilation terminated.

Fixes: 41d9d44d72 ("ARM: OMAP2+: pm33xx-core: Add platform code needed for PM")
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2018-04-18 10:07:13 -07:00
Arnd Bergmann
49774d86fd Samsung soc drivers changes for v4.17 
1. Add SPDX license identifiers.
 2. Populate children syscon nodes in PMU driver to properly model HW in
    DeviceTree.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJansqTEBxrcnprQGtlcm5lbC5vcmcACgkQwTdm5oaLg9f6kQ//
 Wjkcsmj/mqaVaE6QphO0ZMXHXKZKQwY3jRkr8ofQWhAYNKuF9Jq/vLK8G9YDAAs7
 yxK+R7wXXACq2p/a5w7FWdZhQ1F7WZFxF2/cdXjhLH9zEUlkcv05cSQaj7M3pCjQ
 CU3ps6nvdtVIDwAgZT/4lSDQdIzZdkhhOdTK1iVR2PK8fLHNB88gPr+aSXLwkN18
 SLULwONNTSfgNH4BniXqypGdvqo/yWFa3CChw80CBKV0I6ubYfvGhIg0hlVCoA+7
 KibF8CCbHZiblExeDIQWTDNko4e6piNkLyHoQdTvTQ00f4fWxPmIIdzKn0q0JuPP
 BK9VKEO4lX8vXXEH6RYGNnwxYb0C+Jz56ffuyRnSv9XiU2khjWOPx60u4Osx5hMX
 UtMvpj/Ty8WKd7XWJcU/BdXH7j3gz9Q5lX/ZSRh2YEROzE+G2PMzMC7eNW3+NSGx
 3lIuScPHWkYVeg1TCtwwg4Dy/lSKfNTVFbqfzKRUtKvQygLsCTVmUdtRM8BG6mYf
 xybCwZOAUf6a9u5ZeItzINZT03R46vuGjKi6jZYwA3Loe/LDf5CLUeN/+yW2kIDY
 h8WpwSel97h2d6j4fqHVLKK45PFjh37DisRIWN6J4gdPhS7Jd0bIkmxQIoP+bccn
 DPWDJ65N7ubZuoUjuZcC4DuyZHOnJjXUqZbPJy2MzEQ=
 =N7M0
 -----END PGP SIGNATURE-----

Merge tag 'samsung-drivers-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Pull "Samsung soc drivers changes for v4.17" from Krzysztof Kozłowski:

1. Add SPDX license identifiers.
2. Populate children syscon nodes in PMU driver to properly model HW in
   DeviceTree.

* tag 'samsung-drivers-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: pmu: Populate children syscon nodes
  soc: samsung: Add SPDX license identifiers to headers
  memory: samsung: Add SPDX license identifiers
 2018-03-07 16:52:19 +01:00
Arnd Bergmann
aa8f21a8a9 SOC driver changes for v4.17 
- Remove deundant dev_err from probe in ti-emif-srma driver
  - Make use of seq_putc in emif reg show
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaneFCAAoJEHJsHOdBp5c/TKMP/37X0haESP5iB1oFnYz1w3ZK
 PeVr8ik7gKX/Y6o/mnid4CdFqWBTWFG+TJ5gU1cLdPdrLYl80HLzZuJ1XLLthzue
 Sr5w84PlrX1w8JIfAr6QceVho3hlLKh9hGqfDva044no4KWiC+E/jqVwM/FPuSvy
 ZZ7RNjwiTzQZvXDid3xLbavsO1FJMsV/pEjvHU/F3AYI3vWIKhcRpHvkYhJxfb4q
 RKjywuagSP1DhwFr8ZC51Jq/533FaVcqm3I2VNSxLk2x+MX+tzVWzqYut1m4hfM1
 TCap1GBZ9xzmXxpgvGS5G26KQvdFYhDjA/zf1sjPxqRGWT4V1ksKnZ6kVIdhMhVj
 2t5Xn4K4W6oLcA2AAXx9gr771OX9jY6GMJQoRCNTvc9jAXgOvug74A/2L8M1+/R1
 TAM39ojmvvU5UunahL/8QJ1HW4g11Iyno0eEc40waKMvjc/Oh1MkNOJbXUCRULUp
 rwvid5gqa3HazwlMu12VvhjSUlB2pGg0tU3c7Ciu6gE6hqO9fo8Bkq5bN+CTmlFZ
 H/jUdO/F7ml9Y2arrmKwev4IXaL4PkUne5nDM4Rk0zkXitXmnc3TMEpsZ/Gr/NMs
 gYXvHjKFd0RxpKnhEzp3zRh8RfQhccV6sSL+C7GFSJIpPKF+ID2y/g45mslUGUu7
 md0X4F3KS+UxwlDkHFm9
 =J0Q3
 -----END PGP SIGNATURE-----

Merge tag 'soc_drivers_for_4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers

Pull "SOC driver changes for v4.17" from Santosh Shilimkar:

 - Remove redundant dev_err from probe in ti-emif-srma driver
 - Make use of seq_putc in emif reg show

* tag 'soc_drivers_for_4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  memory: ti-emif-sram: remove redundant dev_err call in ti_emif_probe()
  memory-EMIF: Use seq_putc() in emif_regdump_show()
 2018-03-07 16:49:12 +01:00
Wei Yongjun
a817e5d82a memory: ti-emif-sram: remove redundant dev_err call in ti_emif_probe() 
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
 2018-03-05 16:21:31 -08:00
SF Markus Elfring
d363a88b31 memory-EMIF: Use seq_putc() in emif_regdump_show() 
A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
 2018-03-05 16:21:26 -08:00
Markus Mayer
fee5f1ef6c memory: brcmstb: dpfe: support new way of passing data from the DCPU 
The DCPU can now send message data in two ways:
  - via the data RAM, as before (this is now message type 0)
  - via the message RAM (this is message type 1)

In order to support both methods, we check the message type of the
response (bits 31:28) and then treat the offset (bits 27:0)
accordingly.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2018-02-23 10:56:59 -08:00
Markus Mayer
9f2c4d95e0 memory: brcmstb: dpfe: fix type declaration of variable "ret" 
In some functions, variable "ret" should be ssize_t, so we fix it.

Fixes: 2f330caff5 ("memory: brcmstb: Add driver for DPFE")
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2018-02-23 10:56:31 -08:00
Markus Mayer
69d7d95452 memory: brcmstb: dpfe: properly mask vendor error bits 
We were printing the entire 32 bit register rather than just the lower
8 bits. Anything above bit 7 is reserved and may be any random value.

Fixes: 2f330caff5 ("memory: brcmstb: Add driver for DPFE")
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2018-02-23 10:56:07 -08:00
Krzysztof Kozlowski
f12bb91624 memory: samsung: Add SPDX license identifiers 
Replace GPL license statements with SPDX GPL-2.0 license identifiers.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2018-02-12 19:55:34 +01:00
Linus Torvalds
fe53d1443a ARM: SoC driver updates for 4.16 
A number of new drivers get added this time, along with many low-priority
 bugfixes. The most interesting changes by subsystem are:
 
 bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC types
   - The TI OMAP sysc driver now supports updated DT bindings
 
 memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there
 
 SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP
 
 reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes
 
 tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with
     the TEE is added
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0fQAAoJEGCrR//JCVIntjEQALc6kflEGJc/FPundbx9V3F/
 b+3+EX/uMnBnKsgZprz9ACPhx5eBH9QWja3A1zmIarb5c+q7zbBZDwhzUb8J8Yg8
 xEb0im7Wx/GcKjUYZVKYBxtz9KjkXDzhrq8IAvPg6ShNcIy/8hq7ZO3iOkGsTDcy
 /PyioWKC5g0dhJgtp91X1kgog5tuTaWOg39uUOqyEzwVu1vYVa4w+eeCzjEd6I//
 68R/zDQ52+hWw6WZGoYOsNYzuriOflnJRnNpwuGhMhLNULBJfWnd4hkqGm4E+hFa
 5dzW6vVAdIqjemFqPzCBT2WB4UG871aZX8DJ9HgnfX+g970nlsm1JY8Ck9MJNJum
 aDkqZG41ArUYzDFWu8vJ2SKsue5lEZp6TEO2mLEVYrdOjOgedj0Zxqmq2DYeigxd
 +ccOVgKJ9SsYw9ft1LkQ5BHCgOh3C7y9Kcg7oBnaEI5OTVvtf5PwEkT2cwbvgxYl
 EVKLhlJ0Af+QXOW8E5JbNQETpYw52DMm6UKHiYn/JCGxB/8J0bgJzImDJI4Dtu2h
 zqJITKJeTepqbfA5pmNfKa+20RhmsktdRCw2NN/QynY7EEtGjHAUVnlpZT2mrDco
 0m62b7Erek/776vJN5ECzE5e6XCs2N0MDE6Anp121C5zEmig/SMBrUosMzP7Jnis
 IDVC/QWkb3u85wK20Vc1
 =yz0k
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "A number of new drivers get added this time, along with many
  low-priority bugfixes. The most interesting changes by subsystem are:

  bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC
     types
   - The TI OMAP sysc driver now supports updated DT bindings

  memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there

  SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM
     SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP

  reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes

  tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with the
     TEE is added"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
  of: platform: fix OF node refcount leak
  soc: fsl: guts: Add a NULL check for devm_kasprintf()
  bus: ti-sysc: Fix smartreflex sysc mask
  psci: add CPU_IDLE dependency
  soc: xilinx: Fix Kconfig alignment
  soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
  soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
  soc: bcm: brcmstb: Be multi-platform compatible
  soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
  Revert "soc: brcmstb: Only register SoC device on STB platforms"
  bus: omap: add MODULE_LICENSE tags
  soc: brcmstb: Only register SoC device on STB platforms
  tee: shm: Potential NULL dereference calling tee_shm_register()
  soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
  dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
  soc: xilinx: Create folder structure for soc specific drivers
  of: platform: populate /firmware/ node from of_platform_default_populate_init()
  soc: samsung: Add SPDX license identifiers
  soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
  tee: shm: don't put_page on null shm->pages
  ...
 2018-02-01 16:35:31 -08:00
Ladislav Michl
a758f50f10 mtd: onenand: omap2: Configure driver from DT 
Move away from platform data configuration and use pure DT approach.

Use generic probe function to deal with OneNAND node and remove now useless
gpmc_probe_onenand_child function. Import sync mode timing calculation
function from mach-omap2/gpmc-onenand.c

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
 2018-01-12 16:41:15 +01:00
Olof Johansson
11077e9bf7 SOC: Keystone Soc driver updates for 4.16 
- TI EMIF-SRAM driver
  - TI SCI print format fix
  - Navigator strndup lenth fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaRE65AAoJEHJsHOdBp5c/BOQP/1tvzmfQ2nllYiAJBN35e/PO
 0qQE2rrFhPgoSx1e5+6gvuGhdekBvuqE68ejbswSYttfseOOOGpdh7s15M+sieQv
 fkZd7XJQMfBamJv+C5zZYe/qBNtfa8WFvAdSndpDYIaxSMsE5lzqbQPQga0/G2YW
 uYLc/iEFqh5uKVLl/KmVHGZ9sZ8kXZF8gGyLuzkgpqjuaJZZKygEi5agzq6EJhQK
 09BEqQiesUWLxcYLjbao3EPmLmCWzsCyTbpEHBkRYtiRgsn7iccdLjQ8VSWfvb1n
 md3/FprPA7EuLdlYwuHQxsBNsm93WAPzLnubS1UKsenUEcbE36W4bJZgwbYHuaOT
 oHGeoAdTM1VWrjQ3Lty+Nn8hhCexrn72nVAxwnyt54CEdirxdSikrYOjq5jhf50z
 xP5eQp7J/GhX9b6xUHB25PnlxmRx2jIb1MAD5wHlND/Khw0kpph7mRuTUWtmnTOB
 w+qJfPpb+WkYep/8TkplyX86XB0eFghO9wPhOjc4lMmPdpsXlrdca78I+4YI6cv3
 dvIRZwI4knwKQo6bqJ1lizCOaGHFxZLPylSLDplVatZFP6f1FuEHQ9GcxE2ErygP
 A5j+JRIJVedwW1ZJWMe3TPRAOnGrsWzuVUcBCYGURUYhGWrU6VMNGTc4nVducor+
 Ukoyta0/V6rsBZCEBuP9
 =hKyd
 -----END PGP SIGNATURE-----

Merge tag 'keystone_driver_soc_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers

SOC: Keystone Soc driver updates for 4.16

 - TI EMIF-SRAM driver
 - TI SCI print format fix
 - Navigator strndup lenth fix

* tag 'keystone_driver_soc_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  soc: ti: fix max dup length for kstrndup
  firmware: ti_sci: Use %zu for size_t print format
  memory: ti-emif-sram: remove unused variable
  memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  Documentation: dt: Update ti,emif bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-01-04 23:12:57 -08:00
Arnd Bergmann
62bf8ae896 memory: tegra: Changes for v4.16-rc1 
The Tegra memory controller driver will now instruct the SMMU driver to
 create groups, which will make it easier for device drivers to share an
 IOMMU domain between multiple devices.
 
 Initial Tegra186 support is also added in a separate driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlo6tlMTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoR7MEACpoyPkV5fGz3z8rdsYaVZSA+upYEHw
 CC4v5XslNCucmk57XIYTbAZRu7W5MuzP3hq+DoYM5B5EHxgt1a2YHNtjjg3eLx1T
 U+8hjoOPOYu7FBVmUf4V6Buvmws90DxtfvqcfIScJJEAPgKsT/wfGXNstc88kDnO
 c+huQxk5QZsyGBgt1sS61zlymaLpDlSoE6kScXnjM1K6XtUdZ+8zmoMdZ7Ka8DUv
 kwBoYXgUpVminWpSrfuV7f3/8BtTSJ/b2rUPz7Ren0JJTFrhIi/ckeQ5YhTa46Dn
 oqR0f6MuLRGADT+E5DfoF7otvE2Fvq0Uq/YlypIf9gtiit5mhPM7ZXb3LOwDGiCp
 0mwljW9Uov7ZpFnb8b9SlVf1b+zDeeLxtARq4qzgky5OkWZp4hXZw+Os3ebXQYW3
 d/MUfwdqgNKOccGRsRkk9OEdUiFGpGtInb0xM9OWBCHvdrXhbK9llZ3wnrE+M3SY
 BELM+94YorqVPx5JTmiM7kTozVwpkvZQG6kU2J81Y55FI1ELQF7Mk0yzFs562tG5
 2abc07xkSUCdC6zsrgNOy+AtuRH8oHccUfZRACLUhzHNCrvfr3MrEcEv8l4VRJp4
 ZLfR8UjmtTI8YllBKdSdUtFB4nN5oyoIPCNsgwzXcTnKV5SzAyA/KuDW6IWoNU1L
 6ekAxpeiHVnLKA==
 =ncAl
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "memory: tegra: Changes for v4.16-rc1" from Thierry Reding:

The Tegra memory controller driver will now instruct the SMMU driver to
create groups, which will make it easier for device drivers to share an
IOMMU domain between multiple devices.

Initial Tegra186 support is also added in a separate driver.

* tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  iommu/tegra-smmu: Fix return value check in tegra_smmu_group_get()
  iommu/tegra: Allow devices to be grouped
  memory: tegra: Create SMMU display groups
  memory: tegra: Add Tegra186 support
  dt-bindings: memory: Add Tegra186 support
  dt-bindings: misc: Add Tegra186 MISC registers bindings
 2017-12-21 18:05:04 +01:00
Thierry Reding
2a8102dfe0 memory: tegra: Create SMMU display groups 
Create SMMU display groups for Tegra30, Tegra114, Tegra124 and Tegra210.
This allows the display controllers on these devices to share the same
IOMMU domain using the standard IOMMU group mechanism.

Signed-off-by: Thierry Reding <treding@nvidia.com>
 2017-12-15 10:12:32 +01:00
Thierry Reding
02b0cc52c0 memory: tegra: Add Tegra186 support 
The memory controller found on Tegra186 is different in some respects to
its predecessors. Most notably it no longer implements an SMMU, but does
assign ARM SMMU stream IDs for each memory client instead.

Provide a driver that programs these registers so that memory clients
can translate addresses via the ARM SMMU.

Signed-off-by: Thierry Reding <treding@nvidia.com>
 2017-12-13 12:58:21 +01:00
Arnd Bergmann
84a1695a6f memory: ti-emif-sram: remove unused variable 
The newly introduced driver causes a harmless warning for a variable
that was evidently never used:

drivers/memory/ti-emif-pm.c: In function 'ti_emif_remove':
drivers/memory/ti-emif-pm.c:303:17: error: unused variable 'dev' [-Werror=unused-variable]

Fixes: 8428e5ad75 ("memory: ti-emif-sram: introduce relocatable suspend/resume handlers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
 2017-12-06 09:50:20 -08:00
Dave Gerlach
8428e5ad75 memory: ti-emif-sram: introduce relocatable suspend/resume handlers 
Certain SoCs like Texas Instruments AM335x and AM437x require parts
of the EMIF PM code to run late in the suspend sequence from SRAM,
such as saving and restoring the EMIF context and placing the memory
into self-refresh.

One requirement for these SoCs to suspend and enter its lowest power
mode, called DeepSleep0, is that the PER power domain must be shut off.
Because the EMIF (DDR Controller) resides within this power domain, it
will lose context during a suspend operation, so we must save it so we
can restore once we resume. However, we cannot execute this code from
external memory, as it is not available at this point, so the code must
be executed late in the suspend path from SRAM.

This patch introduces a ti-emif-sram driver that includes several
functions written in ARM ASM that are relocatable so the PM SRAM
code can use them. It also allocates a region of writable SRAM to
be used by the code running in the executable region of SRAM to save
and restore the EMIF context. It can export a table containing the
absolute addresses of the available PM functions so that other SRAM
code can branch to them. This code is required for suspend/resume on
AM335x and AM437x to work.

In addition to this, to be able to share data structures between C and
the ti-emif-sram-pm assembly code, we can automatically generate all of
the C struct member offsets and sizes as macros by processing
emif-asm-offsets.c into assembly code and then extracting the relevant
data as is done for the generated platform asm-offsets.h files.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
 2017-12-02 19:27:17 -08:00
Ladislav Michl
c18a7ac339 memory: omap-gpmc: Make 'bank-width' property optional 
Error out only if both 'bank-width' and 'gpmc,device-width' are missing.
As 'bank-width' is mostly used for NOR devices and all other devices must
use 'gpmc,device-width' update the error message accordingly.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2017-12-01 15:37:49 +02:00
Linus Torvalds
cf9b0772f2 ARM: SoC driver updates for v4.15 
This branch contains platform-related driver updates for ARM and ARM64,
 these are the areas that bring the changes:
 
 New drivers:
  - Driver support for Renesas R-Car V3M (R8A77970)
  - Power management support for Amlogic GX
  - A new driver for the Tegra BPMP thermal sensor
  - A new bus driver for Technologic Systems NBUS
 
 Changes for subsystems that prefer to merge through arm-soc:
  - The usual updates for reset controller drivers from Philipp Zabel,
    with five added drivers for SoCs in the arc, meson, socfpa, uniphier
    and mediatek families.
  - Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
    Heiner Kallweit and Lorenzo Pieralisi.
 
 Changes specific to some ARM-based SoC
  - The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
    on ARM as well.
  - Several changes for power management on Broadcom SoCs
  - Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
  - Minor Cleanups for Samsung, TI OMAP SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDggbAAoJEGCrR//JCVInIeQQAN1MDyO1UaWiFYnbkVOgzFcj
 dqbFOc41DBE/90JoBWE8kR/rjyF83OqztiaYpx9viu2qMMBZVcOwxhCUthWK59c/
 IujYdw4zGevLscF+jdrLbXgk97nfaWebsHyTAF307WAdZVJxiVGGzQEcgm71d6Zp
 CXjLiUii4winHUMK9FLRY2st0HKAevXhuvZJVV432+sTg3p7fGVilYeGOL5G62WO
 zQfCisqzC5q677kGGyUlPRGlHWMPkllsTTnfXcmV/FUiGyVa3lUWY5sEu+wCl96O
 U1ffPENeNj/A/4fa1dbErtbiNnC2z/+jf+Dg7Cn8w/dPk4Suf0ppjP8RqIGyxmDl
 Wm/UxbwDClxaeF4GSaYh2yKgGRJMH5N87bJnZRINE5ccGiol8Ww/34bFG0xNnfyh
 jSAFAc318AFG62WD4lvqWc7LSpzOYxp/MNqIFXKN692St/MJLkx8/q0nTwY1qPY0
 3SELz9II3hz+3MfDRqtRi7hZpkgHgQ+UG7S5+Xhmqrl309GOEldCjPVJhhXxWoxK
 ZPtZOuyYvGhIC+YAnHaN6lUjADIdNJZHwbuXFImx85oKHVofoxHbcni5vk8Uu7z1
 sQNYOtdDGaPG/2u9RJdJlPg/jIgLKxxt/Xm9TYVawpZ5hFANhBTtIq5ExCRAil68
 j9sMOrpZ1DzCQyR7zN2v
 =qDhq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This branch contains platform-related driver updates for ARM and
  ARM64, these are the areas that bring the changes:

  New drivers:

   - driver support for Renesas R-Car V3M (R8A77970)

   - power management support for Amlogic GX

   - a new driver for the Tegra BPMP thermal sensor

   - a new bus driver for Technologic Systems NBUS

  Changes for subsystems that prefer to merge through arm-soc:

   - the usual updates for reset controller drivers from Philipp Zabel,
     with five added drivers for SoCs in the arc, meson, socfpa,
     uniphier and mediatek families

   - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
     Heiner Kallweit and Lorenzo Pieralisi

  Changes specific to some ARM-based SoC

   - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
     ARM as well

   - several changes for power management on Broadcom SoCs

   - various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
     Mediatek

   - minor Cleanups for Samsung, TI OMAP SoCs"

[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
  because the R8A77970 driver is missing a header file that came from
  that pull.

  The fact that this got merged afterwards only fixes it at this point,
  and bisection of that driver will fail if/when you walk into the
  history of that driver.           - Linus ]

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
  soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
  bus: add driver for the Technologic Systems NBUS
  memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
  soc: qcom: remove unused label
  soc: amlogic: gx pm domain: add PM and OF dependencies
  drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
  dt-bindings: power: add amlogic meson power domain bindings
  soc: amlogic: add Meson GX VPU Domains driver
  soc: qcom: Remote filesystem memory driver
  dt-binding: soc: qcom: Add binding for rmtfs memory
  of: reserved_mem: Accessor for acquiring reserved_mem
  of/platform: Generalize /reserved-memory handling
  soc: mediatek: pwrap: fix fatal compiler error
  soc: mediatek: pwrap: fix compiler errors
  arm64: mediatek: cleanup message for platform selection
  soc: Allow test-building of MediaTek drivers
  soc: mediatek: place Kconfig for all SoC drivers under menu
  soc: mediatek: pwrap: add support for MT7622 SoC
  soc: mediatek: pwrap: add common way for setup CS timing extenstion
  soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
  ..
 2017-11-16 16:05:01 -08:00
Arnd Bergmann
ad54c3e75d OMAP-GPMC: driver updates for v4.15, part 2 
* get rid of unused function gpmc_update_nand_reg().
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ/GqwAAoJENJaa9O+djCTnMwP/3pJrB8jKAd61grL2P60PWYo
 zWhKacCgq2NyU6QeaNpLYf4msaF2krKnvhfe4zEWpwAQugLwS6XkF0wCDyfRxKE/
 8A2rOyeCWSumD6ryFshBe1bg3xCxe0y7bOZqq6bo75Vgz5RwICZIsyre59b2RzMI
 imCck115FxmGrE0GHPlPmosjzTcEeMqiNkb0xzf+nsFiDaEIa6Y6UEd7A+x133w8
 t9uvVlwIz3i1ghiDRMOWKE+M5WM+/HVVlSlT2DxS86wpIqqExbxcsBGqKrSidooC
 8LNEDRwMIUR/v19fzFzaQ1I66pmhXR+zWEnU1H3XbGxQfT9uvQPfEYNvqi10TDgl
 YlPyfpKBTSfJSMhZZ3/XbJ9u2Sr3dAsG77tMIDW3U1g9MaGeJXjNI8c89xy41jpy
 C/31tawGlYKAn68lKSR53+aWbFAQNpE6ffPwSMdfvuY5qwAZnecE1pQc+vUxiFSQ
 J+Rauj431jVu1D8bLYvq/nb7sqQaeW81qvqtk3qDAU9fatdiyDKLQ48JzxyCnZz5
 4IX9q7hZH83dJNptPam4Ol2SMIypC0ppFmWiGamNdddDr40E3mjGeIut+iC4UHRb
 Oj5mzLL6eMiITlpSjve0FxhE0dhxyfHIiQ7Fz9iTfSUkJdyfyh1SwTPzojLuNMAs
 3RcB124dpea3gZ1QF7sd
 =qq+j
 -----END PGP SIGNATURE-----

Merge tag 'gpmc-omap-for-v4.15-pt2' of https://github.com/rogerq/linux into next/drivers

Pull "OMAP-GPMC: driver updates for v4.15, part 2" from Roger Quadros:

* get rid of unused function gpmc_update_nand_reg().

* tag 'gpmc-omap-for-v4.15-pt2' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
 2017-11-07 16:31:01 +01:00
Ladislav Michl
a622c64166 memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() 
Deprecated gpmc_update_nand_reg() is no longer used, remove.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2017-11-03 15:06:11 +02:00
Arnd Bergmann
3330becb47 This pull request contains Broadcom ARM/ARM64/MIPS SoCs changes for 4.15 
(second part), please pull the following:
 
 - Markus updates the Broadcom STB DPFE driver to avoid loading the firmware when
   unnecessary to accomodate for specific platform restrictions
 
 - Florian adds support for the Broadcom Hurricane 2 SoC iProc PLL clock needed
   to get the proper CPU clock frequency
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZ6o4yAAoJEIfQlpxEBwcEs3MQAJ9bBFsnLu3hNFM7WNuXgVDS
 z4/BYsVUhPzwz2lLB/OMsKU8xkGd/d7DcPvziMpvgWzTXoVEboXWtN5S2ReiVYja
 Pyl0UMTmT6Jo1z+8WQkWJROUYmaLQzVHr/J3q15FItNS6gvsxntiDYUVLHtIe+g2
 3IOTDSVSptPoYYxWi3PiBsXfjb+ja/ob01K8cQh+3AcjopRTE9F7l9EXhUJWOJ9Y
 21eCyCiPVdjFKfV2etby4XcTqV1LrvJEhmpaRBsn+jitvWYdaMb4+jwUv58nf7SF
 JaSBAjSRZ29FoVpUryHk9/yBt5NBv2WyAyizMG95JXeOnd2QDTi5RltxiG20kvBf
 Q9pm8w0FvAM+RmKE/eFHXil7jJOczuSoen+vOXbvvxaBP6vSVGkrGt/aEMvUCr2a
 Z+/fogKTIehQZhfrrkw1t5vLcmTGPYidggFPxED22juPpy9weVKqMiU02n6F7LpC
 NsyCtmooXVB+KBcMX71G7ywO9y5bz3Tqmn6nYrjf6Lyz7WoDPn1FlDxlvNfUi4uy
 6rhmvwG1b4BT5ksZzu99I9uNhlVNQ1QxHetkpeHgQ/GWYGzCSYqewIdrooEhItyZ
 zibeLlUPJVIu338MYPjoUa2VSGwD2uy1b//wQW+qnA+fSDWw/v7vLW3/svo7D6Ov
 C8dNRSRXXyeZmpfejFPW
 =ecY1
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.15/drivers-part2' of http://github.com/Broadcom/stblinux into next/drivers

Pull "Broadcom drivers changes for 4.15 (part 2)" from Florian Fainelli:

This pull request contains Broadcom ARM/ARM64/MIPS SoCs changes for 4.15
(second part), please pull the following:

- Markus updates the Broadcom STB DPFE driver to avoid loading the firmware when
  unnecessary to accomodate for specific platform restrictions

- Florian adds support for the Broadcom Hurricane 2 SoC iProc PLL clock needed
  to get the proper CPU clock frequency

* tag 'arm-soc/for-4.15/drivers-part2' of http://github.com/Broadcom/stblinux:
  clk: bcm: Add Broadcom Hurricane 2 clock support
  memory: brcmstb: dpfe: skip downloading firmware when possible
  memory: brcmstb: dpfe: introduce is_dcpu_enabled()
 2017-11-02 16:21:03 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2017-11-02 11:10:55 +01:00
Arnd Bergmann
d5bd8507cf OMAP-GPMC: driver updates for v4.15 
* get rid of unused field in platform data structure.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ5e7QAAoJENJaa9O+djCTzQoQALVUigXfVEgCsQQCItSyKHIg
 st8MZgrwiyz+IjXpg5zhVSL8gYEB2WAEObXxdIGyJPuHURjJpHcgxDpU/TNKU9WK
 Nf3enS+Hgk7SS+vuOHzyVAPsm7X/mc5cUgXdZXeaHc1+Y/pL9l5A6JJcru+oak8v
 ikqHBxd4eBEq7DKFkpD/SP/j1o3P6fEzex6ZkX8WW/zboUNtzUIuoSd6kOwaJChc
 SMuXbiipFOL1eZnJoaT5id0yCc8l6TYSSVhc42QoqD8F57mpuIZeVzymJtpe0UQi
 boWNCTLKRoGADTATzXOJ/pDO6Q0d72XakL1iPeqG1/IhaoQVo5PDhpNfJncNu1H+
 IbP0vq/BR3IlBjmc9i80DNqbC1toUDrlm5zHCK5YrgnDe2g8fqMT+KkIe99kPogI
 sav61x1mELwUFPfyJ6nzLWmBoTxc5POIgCkumT16+0Cho4xE760Sa9GjjvTqZGr8
 7G1hSXYdVqsFt2/JG5BMTGWmF5rsqBzJbVdCwKlI3F9IKbw+cebDe37lwOBqeVu8
 Cx8Sl+rsjkPFnBHclaKVWItC+MYoM+nhQolhcuQA1dGpdDzqdJ77UfsGEFBmUQh0
 PDV32yLEkxL+YbogJ2DT6eiTA+SLn8XQIY9w6FIqjzQa7IyjHR7n7tEBaEJkHbBh
 kU+lCW+AamzV5KWlLehM
 =ii3q
 -----END PGP SIGNATURE-----

Merge tag 'gpmc-omap-for-v4.15' of https://github.com/rogerq/linux into next/drivers

Pull "OMAP-GPMC: driver updates for v4.15" from Roger Quadros:
* get rid of unused field in platform data structure.

* tag 'gpmc-omap-for-v4.15' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Drop gpmc_status
 2017-10-20 22:36:23 +02:00
Ladislav Michl
0d96a4f6a0 memory: omap-gpmc: Drop gpmc_status 
This field is no longer used, drop it.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2017-10-17 14:46:37 +03:00
Markus Mayer
a56d339e8c memory: brcmstb: dpfe: skip downloading firmware when possible 
We want to skip downloading the DPFE firmware from Linux if it was
already downloaded by the boot loader.

The driver now checks if the DCPU is already running and, if so,
whether it can process commands. If the DCPU processes commands
successfully, the driver skips the firmware download step.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2017-10-06 16:19:14 -07:00
Markus Mayer
d56e746f4b memory: brcmstb: dpfe: introduce is_dcpu_enabled() 
In order to check whether or not the DCPU is running, we introduce
a function called is_dcpu_enabled().

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2017-10-06 16:18:46 -07:00
Markus Mayer
2f330caff5 memory: brcmstb: Add driver for DPFE 
This driver allows access to DRAM properties, such as the refresh rate,
via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be
used as indirect indicator of the DRAM temperature.

The driver also allows setting of the sampling interval.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2017-09-18 11:59:39 -07:00
Linus Torvalds
ae46654bcf ARM: SoC driver updates for v4.14 
This branch contains platform-related driver updates for ARM and ARM64.
 
 Among them:
 
  - Reset driver updates:
   + New API for dealing with arrays of resets
   + Make unimplemented {de,}assert return success on shared resets
   + MSDKv1 driver
   + Removal of obsolete Gemini reset driver
   + Misc updates for sunxi and Uniphier
 
  - SoC drivers:
   + Platform SoC driver registration on Tegra
   + Shuffle of Qualcomm drivers into a submenu
   + Allwinner A64 support for SRAM
   + Renesas R-Car R3 support
   + Power domains for Rockchip RK3366
 
  - Misc updates and smaller fixes for TEE and memory driver subsystems
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdt7AAoJEIwa5zzehBx3EboP/jR2T9lrMavXR1zL48L14yJb
 S+fiJlrX1Kr42UF4PQvsfs+uTqOLmycrPVFkMb6IwoUPzQ9UCOSoiMzYm2b7ZPvt
 uIesHhdM3/xun6wKfieN8GmNA1yDVynTxo0TTYDw5ha7I6s2GHgw0GSFzy3wm0Qg
 KzerAO3gzf3L5XsKR0cai3IXNjHO9ubpFG1ReR09da28nPElP8ggWg0KnqdO76Ch
 BGpFj78EC875ZNqwHgnspUqgGDJnBjig3m/uA4FWA0G9Jl38tCyKTZfUR7cEraoV
 kyCgBlR/UrI8eXVTyEy5k5iTsQ3A1VhX4rGjyH+5NZHTs1yWr4+RDND/qeGl9tSo
 VASuOtH6Rc3vdUDpHPBNAFNQH8fwwDoKf96dvN1tiffsx6LSKb//NyOfkXzKOtR6
 CP5raYfX4YktLtHq0XVTZ/6r3XmLcTHzElR/dCFpQOFcTOYii0pWtfcWouahbZ1w
 dhoBX/dbNq37MfzrxtHN2VTIEHpn2GU7u+ZGkp2ArokD58BAft/M3Xee1cDnF75g
 ZDwe5eNFT8aBZKaY7zwG8cdxiw9kACAivDRwW+zgpfUr39c+d0+QmVfnfJh4EGXK
 Ri6yr2EfBWK6jw3cwkdSyyt7iSzIkB+RiuuD1MjpYhWzAvoDpzqkXYukFGbpXnuy
 vUFHNuP1ocUsRtCs8mm1
 =yBzS
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "This branch contains platform-related driver updates for ARM and ARM64.

  Among them:

   - Reset driver updates:
     + New API for dealing with arrays of resets
     + Make unimplemented {de,}assert return success on shared resets
     + MSDKv1 driver
     + Removal of obsolete Gemini reset driver
     + Misc updates for sunxi and Uniphier

   - SoC drivers:
     + Platform SoC driver registration on Tegra
     + Shuffle of Qualcomm drivers into a submenu
     + Allwinner A64 support for SRAM
     + Renesas R-Car R3 support
     + Power domains for Rockchip RK3366

   - Misc updates and smaller fixes for TEE and memory driver
     subsystems"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
  soc/tegra: fuse: Add missing semi-colon
  soc/tegra: Restrict SoC device registration to Tegra
  drivers: soc: sunxi: add support for A64 and its SRAM C
  drivers: soc: sunxi: add support for remapping func value to reg value
  drivers: soc: sunxi: fix error processing on base address when claiming
  dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
  bus: sunxi-rsb: Enable by default for ARM64
  soc/tegra: Register SoC device
  firmware: tegra: set drvdata earlier
  memory: Convert to using %pOF instead of full_name
  soc: Convert to using %pOF instead of full_name
  bus: Convert to using %pOF instead of full_name
  firmware: Convert to using %pOF instead of full_name
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
  soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
  soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
  dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
  reset: uniphier: add analog amplifiers reset control
  reset: uniphier: add video input subsystem reset control
  ...
 2017-09-10 20:40:00 -07:00
Linus Torvalds
4dfc278803 IOMMU Updates for Linux v4.14 
Slightly more changes than usual this time:
 
 	- KDump Kernel IOMMU take-over code for AMD IOMMU. The code now
 	  tries to preserve the mappings of the kernel so that master
 	  aborts for devices are avoided. Master aborts cause some
 	  devices to fail in the kdump kernel, so this code makes the
 	  dump more likely to succeed when AMD IOMMU is enabled.
 
 	- Common flush queue implementation for IOVA code users. The
 	  code is still optional, but AMD and Intel IOMMU drivers had
 	  their own implementation which is now unified.
 
 	- Finish support for iommu-groups. All drivers implement this
 	  feature now so that IOMMU core code can rely on it.
 
 	- Finish support for 'struct iommu_device' in iommu drivers. All
 	  drivers now use the interface.
 
 	- New functions in the IOMMU-API for explicit IO/TLB flushing.
 	  This will help to reduce the number of IO/TLB flushes when
 	  IOMMU drivers support this interface.
 
 	- Support for mt2712 in the Mediatek IOMMU driver
 
 	- New IOMMU driver for QCOM hardware
 
 	- System PM support for ARM-SMMU
 
 	- Shutdown method for ARM-SMMU-v3
 
 	- Some constification patches
 
 	- Various other small improvements and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZtCFNAAoJECvwRC2XARrjZnQP/AxC/ezQpq82HbegF4sM/cVE
 Ep7TeTqodEl75FS/6txe2wU0pwodqk/LB9ajfQZUbE1w8vKsNEqi5qf4ZYHGoxYI
 5bWyjJBzKIlwENH5lsBpQNt6XLevrYmRsFy7F0tRYy+qPQq8k+js2i7/XkCL3q7L
 3xklF847RRoITaTOhhaROx1pF23dSMEsS2XGuWHcZfjORtep4wcFKzd/2SvlCWCo
 P2bRU7jBzfJuuGSA80gaiUbDmrULTUfYuZNp7njASzCgsDmagERtvDEpdoXPNNSp
 u6s4LjU1Dp3fgr6g6cFRO7B6JUbWd619nwo9so/c/wZN54yEngBF9EyeeF3mv2O5
 ZbM2mOW3RlZcjxFT/AC8G4cZwwP6MpCEQOdqknoqc6ZQwcDqwN0o9I4+po0wsiAU
 89ijZZe9Mx0p9lNpihaBEB1erAUWPo5Obh62zo80W3h6x9WzkGQWM+PyFK2DYoaC
 8biEZzcc21sLEHvXQkcEGJSKrihHr9sluOqvxmCw5QAkYIFAeZRoeH7JtZWjVCnr
 T3XvaG1G1Aw6tS7ErxufdKawREAGki0Rm9i1baiH9sqNj5rllM01Y+PgU6E21Nbg
 iZp9gJLjfwM4vhYLlovvQK5PRoOBsCkyCpEI4GJqjLeam5p/WN06CFFf0ifQofYr
 qDPCVDkWHWV8nugFFKE7
 =EVh9
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "Slightly more changes than usual this time:

   - KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries
     to preserve the mappings of the kernel so that master aborts for
     devices are avoided. Master aborts cause some devices to fail in
     the kdump kernel, so this code makes the dump more likely to
     succeed when AMD IOMMU is enabled.

   - common flush queue implementation for IOVA code users. The code is
     still optional, but AMD and Intel IOMMU drivers had their own
     implementation which is now unified.

   - finish support for iommu-groups. All drivers implement this feature
     now so that IOMMU core code can rely on it.

   - finish support for 'struct iommu_device' in iommu drivers. All
     drivers now use the interface.

   - new functions in the IOMMU-API for explicit IO/TLB flushing. This
     will help to reduce the number of IO/TLB flushes when IOMMU drivers
     support this interface.

   - support for mt2712 in the Mediatek IOMMU driver

   - new IOMMU driver for QCOM hardware

   - system PM support for ARM-SMMU

   - shutdown method for ARM-SMMU-v3

   - some constification patches

   - various other small improvements and fixes"

* tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
  iommu/vt-d: Don't be too aggressive when clearing one context entry
  iommu: Introduce Interface for IOMMU TLB Flushing
  iommu/s390: Constify iommu_ops
  iommu/vt-d: Avoid calling virt_to_phys() on null pointer
  iommu/vt-d: IOMMU Page Request needs to check if address is canonical.
  arm/tegra: Call bus_set_iommu() after iommu_device_register()
  iommu/exynos: Constify iommu_ops
  iommu/ipmmu-vmsa: Make ipmmu_gather_ops const
  iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable
  iommu/amd: Rename a few flush functions
  iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY
  iommu/mediatek: Fix a build warning of BIT(32) in ARM
  iommu/mediatek: Fix a build fail of m4u_type
  iommu: qcom: annotate PM functions as __maybe_unused
  iommu/pamu: Fix PAMU boot crash
  memory: mtk-smi: Degrade SMI init to module_init
  iommu/mediatek: Enlarge the validate PA range for 4GB mode
  iommu/mediatek: Disable iommu clock when system suspend
  iommu/mediatek: Move pgtable allocation into domain_alloc
  iommu/mediatek: Merge 2 M4U HWs into one iommu domain
  ...
 2017-09-09 15:03:24 -07:00
Ludovic Desroches
b0f3ab20e7 mfd: syscon: atmel-smc: Add helper to retrieve register layout 
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.

Fixes: fe9d7cb22e ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2017-09-05 08:46:01 +01:00
Joerg Roedel
47b59d8e40 Merge branches 'arm/exynos', 'arm/renesas', 'arm/rockchip', 'arm/omap', 'arm/mediatek', 'arm/tegra', 'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd', 's390' and 'core' into next 2017-09-01 11:31:42 +02:00
Yong Wu
4f608d382e memory: mtk-smi: Degrade SMI init to module_init 
The initialization of MediaTek power manager(SCPSYS) is
builtin_platform_driver, and SMI must depend on power-domain.
Thus, currently subsys_initcall for SMI is unnecessary, SMI will be
always probe defered by power-domain. Degrade it to module_init.

In addition, there are two small changes about the probe sequence:
1) Delete this two lines.
    	if (!dev->pm_domain)
		return -EPROBE_DEFER;
   This is not helpful. the platform driver framework guarantee this.
   The "dev_pm_domain_attach" in the "platform_drv_probe" will return
   EPROBE_DEFER if its powerdomain is not ready.

2) Add the probe-defer for the smi-larb device should waiting for
   smi-common.
   In mt2712, there are 2 smi-commons, 10 smi-larbs. All will be
   probe-defered by the power-domain, there is seldom case that
   smi-larb probe done before smi-common. then it will hang like
   this:

   Unable to handle kernel NULL pointer dereference at virtual address
00000000 pgd = ffffff800a4e0000
[00000000] *pgd=00000000beffe003[   17.610026] , *pud=00000000beffe003
...
[<ffffff800897fe04>] mtk_smi_enable+0x1c/0xd0
[<ffffff800897fee8>] mtk_smi_larb_get+0x30/0x98
[<ffffff80088edfa8>] mtk_mipicsi0_resume+0x38/0x1b8
[<ffffff8008634f44>] pm_generic_runtime_resume+0x3c/0x58
[<ffffff8008644ff8>] __genpd_runtime_resume+0x38/0x98
[<ffffff8008647434>] genpd_runtime_resume+0x164/0x220
[<ffffff80086372f8>] __rpm_callback+0x78/0xa0
[<ffffff8008637358>] rpm_callback+0x38/0xa0
[<ffffff8008638a4c>] rpm_resume+0x4a4/0x6f8
[<ffffff8008638d04>] __pm_runtime_resume+0x64/0xa0
[<ffffff80088ed05c>] mtk_mipicsi0_probe+0x40c/0xb70
[<ffffff800862cdc0>] platform_drv_probe+0x58/0xc0
[<ffffff800862a514>] driver_probe_device+0x284/0x438
[<ffffff800862a8ac>] __device_attach_driver+0xb4/0x160
[<ffffff8008627d58>] bus_for_each_drv+0x68/0xa8
[<ffffff800862a0a4>] __device_attach+0xd4/0x168
[<ffffff800862a9d4>] device_initial_probe+0x24/0x30
[<ffffff80086291d8>] bus_probe_device+0xa0/0xa8
[<ffffff8008629784>] deferred_probe_work_func+0x94/0xf0
[<ffffff80080f03a8>] process_one_work+0x1d8/0x6e0

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2017-08-22 16:38:00 +02:00
Yong Wu
e6dec92308 iommu/mediatek: Add mt2712 IOMMU support 
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.

The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.

Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2017-08-22 16:37:58 +02:00
Rob Herring
db749d17cb memory: Convert to using %pOF instead of full_name 
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2017-08-16 21:37:00 +02:00
Arvind Yadav
46cc815d6d memory: mtk-smi: Handle return value of clk_prepare_enable 
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2017-08-15 17:46:23 +02:00
Honghui Zhang
363932cdef memory: mtk-smi: add larbid handle routine 
In the commit 3c8f4ad85c ("memory/mediatek: add support for mt2701"),
the larb->larbid was added but not initialized.
Mediatek's gen1 smi need this hardware larbid information to get the
register offset which controls whether enable iommu for this larb.
This patch add the initialize routine for larbid.

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2017-08-04 12:04:58 +02:00
Honghui Zhang
75487860a8 memory: mtk-smi: Use of_device_get_match_data helper 
Replace custom code with generic helper to retrieve driver data.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2017-08-04 12:04:57 +02:00
Alexander Dahl
3fb3b3c4b6 memory: atmel-ebi: Fix smc cycle xlate converter 
The converter function for translating ns timings in register values was
initialized with a wrong function pointer. This resulted in wrong
register values also for the setup and pulse registers when configuring
the EBI interface trough dts.

Includes a small fix in a comment of the smc driver, which was probably
just a copy'n'paste mistake.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2017-07-26 22:37:54 +02:00
Alexander Dahl
1f6b53901f memory: atmel-ebi: Allow t_DF timings of zero ns 
As reported in [1] and in [2] it's not possible to set the device tree
property 'atmel,smc-tdf-ns' to zero, although the SoC allows a setting
of 0ns for the t_DF time.

Allow this setting by doing the same thing as in the atmel nand
controller driver by setting ncycles to ATMEL_SMC_MODE_TDF_MIN if zero
is set in the dts.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/490966.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-July/520652.html

Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2017-07-26 22:37:46 +02:00
Alexander Dahl
bc9b934b2f memory: atmel-ebi: Fix smc timing return value evaluation 
Setting optional EBI/SMC properties through device tree always fails due
to wrong evaluation of the return value of
atmel_ebi_xslate_smc_timings().

If you put some of those properties in your dts file, but not
'atmel,smc-tdf-ns' the local variable 'required' in
atmel_ebi_xslate_smc_timings() stays on 'false' after the first 'if'
block. This leads to setting 'ret' to -EINVAL in the first run of the
following 'for' loop which is then the return value of this function.

However if you set 'atmel,smc-tdf-ns' in the dts file and everything in
atmel_ebi_xslate_smc_timings() works well, it returns the content of
'required' which is 'true' then.

So the function atmel_ebi_xslate_smc_timings() always returns non-zero
which lets its call in atmel_ebi_xslate_smc_config() always fail and
thus returning -EINVAL, so the EBI configuration for this node fails.

Judging from the following code evaluating the local 'required' variable
in atmel_ebi_xslate_smc_config() and the call of caps->xlate_config in
atmel_ebi_dev_setup() it's probably right to only let the call fail if a
negative error code is returned.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2017-07-26 22:37:30 +02:00
Linus Torvalds
e854711291 ARM: SoC driver updates 
- New SoC specific drivers
   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware
   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).
 
 - Reset subsystem, merged through arm-soc by tradition:
   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs
   - Various subsystem-wide cleanups
 
 - Updates for existing SoC-specific drivers
   - TI GPMC (General Purpose Memory Controller)
   - Mediatek "scpsys" system controller support for MT6797
   - Broadcom "brcmstb_gisb" bus arbitrer
   - ARM SCPI firmware
   - Renesas "SYSC" system controller
 
 One more driver update was submitted for the Freescale/NXP DPAA
 data path acceleration that has previously been used on PowerPC
 chips. I ended up postponing the merge until some API questions
 for its unusual MMIO access are resolved.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVpDFmCrR//JCVInAQKoihAAosgC3+3IHppOhHid+HepkOcp2teyKknw
 42fSXVpTdfWa8Oe7q80Kzmz2CPNfFq2SzHz6oXb9WCcDFqSGr0b9aSE7NnksRjTf
 2euHVJ4MnJpkRewvorRmcpK8dPXDcHwEw/8hU3yZtJUGI0IKtlrqXis+evgkz9cn
 YDynuVdAZgZiEfiNeSeadyNLcxaQCc3x9ovvsBXxBa1/x1pfeRnTbp+6hiHilCJu
 Szts/yAzZzZE9Jkf9dLKfNlsT6m2SgtjukqqOR+zHAhi7/BdTFSVUP6L8u7QjrR+
 +ijTICg8FMJGiWLAOe6ED2qZVByN92EJ2AGwriYlSles9ouoGfRkJ2rwxyjbete7
 avy0HP+PSBFXWdwbOcq8HX8CrbuBltagl5fkMokct6biWLLMshNZ33WWdQ6/DsM2
 b9mAAZuhbs0g1qWUBD3+q6qBytSuGme6Px6fMoVEc4GQ2YVFUQOoEfZOGKRv1U1o
 aMWGt/6qeF8SG288rYAnQ/TuYWpOLtksV6yhotA00HUHhkTCy0xVCdyWGZtNyKhG
 o/x4YnhWFzHsXmqKcR1sM7LzfZY/WNmbrOLvK6i83Z0P7QptqrdaLAylL3iSPEyX
 ZDUgExf6PYXkWIewc3KwC5sJjuD05z3ZCgIR+mCezwbuD+3Z2fOdjodY/VBZ74hq
 URcM/BqtuWE=
 =5L6n
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "New SoC specific drivers:

   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware

   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).

  Reset subsystem, merged through arm-soc by tradition:

   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
     SoCs

   - Various subsystem-wide cleanups

  Updates for existing SoC-specific drivers

   - TI GPMC (General Purpose Memory Controller)

   - Mediatek "scpsys" system controller support for MT6797

   - Broadcom "brcmstb_gisb" bus arbitrer

   - ARM SCPI firmware

   - Renesas "SYSC" system controller

  One more driver update was submitted for the Freescale/NXP DPAA data
  path acceleration that has previously been used on PowerPC chips. I
  ended up postponing the merge until some API questions for its unusual
  MMIO access are resolved"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  clocksource: owl: Add S900 support
  clocksource: Add Owl timer
  soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
  firmware: tegra: Fix locking bugs in BPMP
  soc/tegra: flowctrl: Fix error handling
  soc/tegra: bpmp: Implement generic PM domains
  soc/tegra: bpmp: Update ABI header
  PM / Domains: Allow overriding the ->xlate() callback
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  soc: renesas: Rework Kconfig and Makefile logic
  reset: Add the TI SCI reset driver
  dt-bindings: reset: Add TI SCI reset binding
  reset: use kref for reference counting
  soc: qcom: smsm: Improve error handling, quiesce probe deferral
  cpufreq: scpi: use new scpi_ops functions to remove duplicate code
  firmware: arm_scpi: add support to populate OPPs and get transition latency
  dt-bindings: reset: Add reset manager offsets for Stratix10
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon
  reset: Add a Gemini reset controller
  ...
 2017-07-04 14:47:47 -07:00
Olof Johansson
cd8eb6291d Few improvments for GPMC (General Purpose Memory Controller) 
found on TI SoCs to produce an error for missing bank-width
 and to make the bootloader timing debug output usable for
 device tree timings.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlk37z4RHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXMnnQ//Q9/U0t9XRtdEh1AxwTkApu4iYg4+uoxD
 kGNtVXsqv24O/WpPOTOUyIv8Q3iI4cjDB0MNqDtyBJeh6jmf6qRdLnc7tIzvfw5n
 5BR94H5CTRLbxd8dV2qzqX+mOu+/n3c/tetVBdnwnJRIyxIgTr5BIAH5Cphs3HZR
 rCQ7KtRs3cToq1P5RcQasO65PSPSflJE1dlB4We+9TyKsiO74l7s4QLBkNG7A500
 bkgr1wtRXtO2v2socJAHy4sU038M/bO+bFRsF78K9s3tmxenKZItxtpaHIfocC5K
 HcfwEm8HlxR6KhQCjtBqZfu4EmcMclqYgq1hahyedx0mU98XBr6goPzjgE64DFLJ
 KWoFVtn5xYx+s1nQhV68GYRX7RzRZWAQ2JXEVOVaCrPaIFlHrkDt6tCROjk+AI15
 PvLuNl08dfYJgg3lUJXpUuVP39TzVW+0NIESS1hCoPIuZ68SD45RaVs+wzRzJeLt
 xPSEfDvbv30bSDzOZzQmmdUBB/lziYQ478x8Ztt8f0IKFOOYR3RrZl08kuXcnxsP
 CE79y/wTcc8WM23Sw/vBq5LcDwrWrYCcjaGPGGB0/9VsAWX+XkgZagy3NsdCQW6G
 TT+xQFos6MkwbPG4Wlwb/Gd90T0WdUnHTzFqFTlP8lMn1PbHeBoh1bwdEmxjaSao
 c2Xryn3UkpI=
 =6p9V
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.13/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

Few improvments for GPMC (General Purpose Memory Controller)
found on TI SoCs to produce an error for missing bank-width
and to make the bootloader timing debug output usable for
device tree timings.

* tag 'omap-for-v4.13/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon

Signed-off-by: Olof Johansson <olof@lixom.net>
 2017-06-18 18:55:59 -07:00
Greg Kroah-Hartman
069a0f32c9 Merge 4.12-rc5 into char-misc-next 
We want the char/misc driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2017-06-12 08:18:10 +02:00
Arvind Yadav
761d031ec9 memory: ti-aemif: Handle return value of clk_prepare_enable 
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2017-06-03 19:08:14 +09:00
Olof Johansson
da3d1d4a4e Merge tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes 
Fixes for 4.12:

Fix two compilation issues

* tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: select CONFIG_ARM_CPU_SUSPEND
  memory: atmel-ebi: mark PM ops as __maybe_unused

Signed-off-by: Olof Johansson <olof@lixom.net>
 2017-06-01 17:07:31 -07:00
Uwe Kleine-König
c9eabf40d9 memory: omap-gpmc: add error message if bank-width property is absent 
Instead of failing silently log a hint for the dt author about the
reason of the failure.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2017-05-31 10:08:10 -07:00
Uwe Kleine-König
95c278b243 memory: omap-gpmc: make dts snippet include semicolon 
In the device tree each property must be terminated with a semicolon, so
include them in the output for easier cut-n-paste.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2017-05-31 10:07:08 -07:00
Tony Lindgren
aff523fb82 memory: omap-gpmc: Fix debug output for access width 
The width needs to be configured in bytes with 1 meaning 8-bit
access and 2 meaning 16-bit access.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2017-05-16 08:12:47 -07:00
Arnd Bergmann
41b80bb1db memory: atmel-ebi: mark PM ops as __maybe_unused 
We get a harmless warning without CONFIG_PM:

drivers/memory/atmel-ebi.c:584:12: error: 'atmel_ebi_resume' defined but not used [-Werror=unused-function]

Marking the function as __maybe_unused does the right thing here
and drops it silently when unused.

Fixes: a483fb10e5ea ("memory: atmel-ebi: Add PM ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2017-05-15 11:37:58 +02:00
Linus Torvalds
9786e34e0a MTD updates for 4.12-rc1: 
NAND, from Boris:
 """
  - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
    davinci, brcmnand, omap)
  - a huge cleanup/rework of the denali driver accompanied with core
    fixes/improvements to simplify the driver code
  - a complete rewrite of the atmel driver to support new DT bindings
    make future evolution easier
  - the addition of per-vendor detection/initialization steps to avoid
    extending the nand_ids table with more extended-id entries
 """
 
 SPI NOR, from Cyrille:
 """
 - fixes in the hisi SPI controller driver.
 - fixes in the intel SPI controller driver.
 - fixes in the Mediatek SPI controller driver.
 - fixes to some SPI flash memories not supported the Chip Erase command.
 - add support to some new memory parts (Winbond, Macronix, Micron, ESMT).
 - add new driver for the STM32 QSPI controller.
 """
 
 And a few fixes for Gemini and Versatile platforms on physmap-of
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZE86yAAoJEFySrpd9RFgtlOoP/1o1s8dlKdd4TazdoxBTL2wy
 C4wPkqPWyfREcD5ZUYJgr6ENI2OnEwcAxAt2CXnqegx+ZIPToBW4/WK9gj/TNLRx
 AfSOz+EPPzo5uZwJPnfocgIFYuhsspymvmISwv66kPbjfkrSjo1l/K9nem3gh7an
 IkQdVVq8brvxNeDZOAzbsT2Y5DZNfs00g1jLXkcQrpfM0sWKcbHIUa0BTWy4WKGV
 ElTr+xh7QHh/Pd9/A5znd3xX54w5+YR/xe38jSBfTb0vEgw/RIfhIcnvxQ8G/7Se
 jE0+8GR5ZJGKwA9Xk5nFzS2G3uECMFNS75KfxkZ0LlEE6ivUvpDbokCbIU4bDOCt
 /8bWQf9AGA3gLHGgNUQTSt5HrkBXTGp917jtAZbI/y2MzTkLw3aAZ/m/j37vv9ON
 ezeGRO6VWK3bcimLFrt6KO5emYstmm4Tp4rRe3jakH7eyTlINDsecKtuMo2xVzyZ
 kK3tnDMdEntECAiKh3ndRdAUL3fs+/IdzWTAxnF9VQFQs1YxiZ1K8kY/zcN+rzbn
 CVkEhdm+tdDBx8XgOdfnOTGRAJ07dGOoDhLPR4/egC/ta6GIRkHQjFSwsW7bD9p9
 phHH6nQX9Bpza1JV/xvljezoHjvZkny4UhRpLgYMowb41DXv7os7ZV+g7kf5sd0i
 mGzCH46j0DmWQ1u5/Q6j
 =dxj5
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND, from Boris:
   - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
     davinci, brcmnand, omap)
   - a huge cleanup/rework of the denali driver accompanied with core
     fixes/improvements to simplify the driver code
   - a complete rewrite of the atmel driver to support new DT bindings
     make future evolution easier
   - the addition of per-vendor detection/initialization steps to avoid
     extending the nand_ids table with more extended-id entries

  SPI NOR, from Cyrille:
   - fixes in the hisi, intel and Mediatek SPI controller drivers
   - fixes to some SPI flash memories not supporting the Chip Erase
     command.
   - add support to some new memory parts (Winbond, Macronix, Micron,
     ESMT).
   - add new driver for the STM32 QSPI controller

  And a few fixes for Gemini and Versatile platforms on physmap-of"

* tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits)
  MAINTAINERS: Update NAND subsystem git repositories
  mtd: nand: gpio: update binding
  mtd: nand: add ooblayout for old hamming layout
  mtd: oxnas_nand: Allocating more than necessary in probe()
  dt-bindings: mtd: Document the STM32 QSPI bindings
  mtd: mtk-nor: set controller's address width according to nor flash
  mtd: spi-nor: add driver for STM32 quad spi flash controller
  mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program
  mtd: nand: davinci: add comment on NAND subpage write status on keystone
  mtd: nand: omap2: Fix partition creation via cmdline mtdparts
  mtd: nand: NULL terminate a of_device_id table
  mtd: nand: Fix a couple error codes
  mtd: nand: allow drivers to request minimum alignment for passed buffer
  mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset
  mtd: nand: denali: allow to override revision number
  mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
  mtd: nand: denali_dt: remove dma-mask DT property
  mtd: nand: denali: support 64bit capable DMA engine
  mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
  mtd: nand: denali: support HW_ECC_FIXUP capability
  ...
 2017-05-11 10:44:22 -07:00
Linus Torvalds
d26f552ebb - New Drivers 
- Freescale MXS Low Resolution ADC
    - Freescale i.MX23/i.MX28 LRADC touchscreen
    - Motorola CPCAP Power Button
    - TI LMU (Lighting Management Unit)
    - Atmel SMC (Static Memory Controller)
 
  - New Device Support
    - Add support for X-Powers AXP803 to axp20x
    - Add support for Dialog Semi DA9061 to da9062-core
    - Add support for Intel Cougar Mountain to lpc_ich
    - Add support for Intel Gemini Lake to lpc_ich
 
  - New Functionality
    - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
    - Add IRQ sense support; motorola-cpcap
    - Add ACPI support; cros_ec
    - Add Reset support; altera-a10sr
    - Add ADC support; axp20x
    - Add AC Power support; axp20x
    - Add Runtime PM support; atmel-ebi, exynos-lpass
    - Add Battery Power Supply support; axp20x
    - Add Clock support; exynos-lpass, hi655x-pmic
 
  - Fix-ups
    - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
    - Add .remove() method; stm32-timers, exynos-lpass
    - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
    - Rename variables for clarity; axp20x
    - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
    - Improve formatting; arizona-core, axp20x
    - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
    - Simplify/refactor code; arizona-core, atmel-ebi
    - Improve error checking; intel_soc_pmic_core
 
  - Bug Fixes
    - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
    - Correct max-register value; stm32-timers
    - Extend timeout to account for clock stretching; cros_ec_spi
    - Use correct IRQ trigger type; motorola-cpcap
    - Fix bad use of IRQ sense register; motorola-cpcap
    - Logic error "||" should be "&&"; mxs-lradc-ts
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZAdDwAAoJEFGvii+H/HdhViMQAJ7Of3xKiS/P1d7RiOhs2OMY
 41R4GojoY2QSurndIbV/PBUbNMlJiqvIawbFCBz7rAZnIv6NatFQGCQnATci8iDV
 tFxz2m705ifstSQTWUr2ykRdNUdKkShLPHdbjs0ZbpV6Xa5tIXT0U7WpdDr+J51B
 422JHx8tVFrktkYCjg7VASKU9hzz8iRSbdpfu6ZitTT3yrr5Ivl0gaCCmXVyWTsF
 fy8DFvEpsAS1pToXGGeZHueTDIgePyEjwT+By6TuDvkObxvCbVrdhKrJnORfHRKx
 +aidbb4E8/ZNYmRERwl4VkAR7y2tenQat/Si+4rtwYHNTcapjjpdEElQTKkIAUpy
 L5Y9Ai0/ihDXpCPmMnf7omnt3qxAltE4voUk2WUIxDOiaFl6XwyxFPDoy5l8T2IM
 i1akRFss/lov9r3dWzxApTdMNwEdeXnHbZgW60h6RHyCH3dqfN3dFcfu9IX/ua01
 HHI4ltkmaokXJmwvpa+/oVxGAfcoS5AGRw1uRfIN1fbjIxEeRS4I8iogqneVQ5GJ
 D766JIhuf1KKBIWu5DYwfCyTgSdBnEt/J/vTIe4zOZrBk/StbeygWfhUMRSutglK
 eORpwzsX8DnS4SYRErCcRRlePB/NU2GvmHOXSApSem9ifHx8sQGM7QZt2am5JYRp
 q/6gViepBHxrA8Xv6mWJ
 =SHiw
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Freescale MXS Low Resolution ADC
   - Freescale i.MX23/i.MX28 LRADC touchscreen
   - Motorola CPCAP Power Button
   - TI LMU (Lighting Management Unit)
   - Atmel SMC (Static Memory Controller)

  New Device Support:
   - Add support for X-Powers AXP803 to axp20x
   - Add support for Dialog Semi DA9061 to da9062-core
   - Add support for Intel Cougar Mountain to lpc_ich
   - Add support for Intel Gemini Lake to lpc_ich

  New Functionality:
   - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
   - Add IRQ sense support; motorola-cpcap
   - Add ACPI support; cros_ec
   - Add Reset support; altera-a10sr
   - Add ADC support; axp20x
   - Add AC Power support; axp20x
   - Add Runtime PM support; atmel-ebi, exynos-lpass
   - Add Battery Power Supply support; axp20x
   - Add Clock support; exynos-lpass, hi655x-pmic

  Fix-ups:
   - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
   - Add .remove() method; stm32-timers, exynos-lpass
   - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
   - Rename variables for clarity; axp20x
   - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
   - Improve formatting; arizona-core, axp20x
   - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
   - Simplify/refactor code; arizona-core, atmel-ebi
   - Improve error checking; intel_soc_pmic_core

  Bug Fixes:
   - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
   - Correct max-register value; stm32-timers
   - Extend timeout to account for clock stretching; cros_ec_spi
   - Use correct IRQ trigger type; motorola-cpcap
   - Fix bad use of IRQ sense register; motorola-cpcap
   - Logic error "||" should be "&&"; mxs-lradc-ts"

* tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits)
  input: touchscreen: mxs-lradc: || vs && typos
  dt-bindings: Add AXP803's regulator info
  mfd: axp20x: Support AXP803 variant
  dt-bindings: Add device tree binding for X-Powers AXP803 PMIC
  dt-bindings: Make AXP20X compatible strings one per line
  mfd: intel_soc_pmic_core: Fix unchecked return value
  mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable()
  mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  mfd: palmas: Fixed spelling mistake in error message
  mfd: lpc_ich: Add support for Intel Gemini Lake SoC
  mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth
  mfd: intel_soc_pmic: Fix a mess with compilation units
  mfd: exynos-lpass: Add runtime PM support
  mfd: exynos-lpass: Add missing remove() function
  mfd: exynos-lpass: Add support for clocks
  mfd: exynos-lpass: Remove pad retention control
  iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  mfd: cpcap: Fix bad use of IRQ sense register
  mfd: cpcap: Use ack_invert interrupts
  ...
 2017-05-03 12:16:25 -07:00
Boris Brezillon
4407319d8f memory: atmel-ebi: Add PM ops 
Add a ->resume() hook to make sure the EBI dev configs are correctly
restored when resuming the platform.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2017-04-27 09:25:06 +01:00
Boris Brezillon
aaa572b945 memory: atmel-ebi: Add missing ->numcs assignment 
ebid->numcs is never assigned, set it to numcs after allocating the
EBI dev object.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2017-04-27 09:25:06 +01:00
Boris Brezillon
9453fa4694 memory: atmel-ebi: Change naming scheme 
The EBI block is not only available on at91 SoCs, but also on avr32 ones.
Change the structure and function prefixes from at91_ebi to atmel_ebi to
match this fact and make the prefix and driver name consistent.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2017-04-27 09:25:06 +01:00
Boris Brezillon
d9f81dad16 memory: atmel-ebi: Stop using reg_field objects for simple things 
Turn the ->ebi_csa reg field into a simple offset that can be used with
with the matrix regmap. Using reg fields was overkill for this use case.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2017-04-27 09:25:06 +01:00
Boris Brezillon
8eb8c7d844 memory: atmel-ebi: Simplify SMC config code 
New helpers/macros have been to atmel-smc.h introduced to simplify SMC
regs manipulation. Rework the code to use those helpers, and simplify
the ->xlate_config(), ->get_config() and ->apply_config() implementations.

SMC configs are now stored in a struct atmel_smc_cs_conf object that
directly contains registers values, which should help implementing
->suspend()/->resume() hooks.

We can also get rid of those regmap fields (and the associated ->init()
hook) which are not longer needed thanks to the
atmel_[h]smc_cs_conf_{apply,get}() helpers.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2017-04-27 09:25:06 +01:00
Alison Wang
4edafe391e memory: ifc: Update dependency of IFC for LS1021A 
As Freescale/NXP IFC controller is available on LS1021A, the dependency
for LS1021A is added.

LS1021A is an earlier product and is not compatible with later
LayerScape architecture. So ARCH_LAYERSCAPE can't cover LS1021A.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
 2017-03-16 10:30:02 +01:00
Tony Lindgren
e24bce8fb4 Linux 4.11-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYvHxaAAoJEHm+PkMAQRiGqd8H/1tNYYnkk57WROf2pg4dpT/k
 jK25fO0pC5AzwRd6TGM5I/Pg4Gh+eoXnO/mTiBJwxcvQY09cV2cW+1Pz7R/MLTfY
 lVU4CmQbM96JN1Wz44WS7H25ByYfWChbPmRzSiA0IjdJvm+C7vWFK0cf18i+EbbE
 pHFbFcIlwPx9cGVQQ7YWN5IGJU0mUYK51n1IHMcjHdMDJdBWtS1rjM+mk/O5ZBl/
 p0OpcO9P5HXhljy4xDgHn6uotTvjB/aZudyfsg7b/sGtIX5GKxXHLOAu7x2kM+a7
 G6+L+48GfjHbt6VEdWA8YmFxyl+se3IG0uIVXTz78cVWfOsd33bCE3s0mOhWFVc=
 =kYFG
 -----END PGP SIGNATURE-----

Merge tag 'v4.11-rc1' into omap-for-v4.11/fixes

Linux 4.11-rc1
 2017-03-06 08:37:53 -08:00
Ladislav Michl
7807e086a2 ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure 
gpmc_probe_onenand_child returns success even on gpmc_onenand_init
failure. Fix that.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2017-02-28 09:06:23 -08:00
Linus Torvalds
b2e3c4319d ARM: SoC driver updates 
Driver updates for ARM SoCs.
 
 A handful of driver changes this time around. The larger changes are:
 
  - Reset drivers for hi3660 and zx2967
  - AHCI driver for Davinci, acked by Tejun and brought in here due to
    platform dependencies
  - Cleanups of atmel-ebi (External Bus Interface)
  - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc
    register range on the SoCs)
  - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrM7/AAoJEIwa5zzehBx3qisP/18NwvbYvC3rMza7k+TEU66n
 vuEF9KW5GhUpQPbNIsTer5qHhC7ZgL7RoR/H7mpZcCxfhYiNXuUaOv8TMGK+WTLQ
 HH6QTs4mARLh1IrRcog1hoElzzqMVxaQgODeaaG1DcPvTqHWsQurbXsf17tCQOri
 nWKyxFpLNlu0kktkGb5JWrM4XBjU9KsW7LME9H86wG8HmB6+mcT5ddeYwW5nD8cG
 txXgmMjdTEKcpbeTg3cAzL4504auhIl4R9uK+8dc1sw+e9T0nXNDS9IkmLPwWtSR
 u8q6zQ3zReoDw4jGUgPP0ILHudfQsiMdWS+P2hw/krpbtLlQ+irHDVa1VA3NLiUT
 9aG9cNTYRMo3ct22YEeWsnAC04XOxpCsqHTR+UWuZaBmf3eoMIXnsafTuwLzqKlQ
 Ent/4eFPInMAzDH8Kaf1Hh0918qkgF2bNlshem11TccQKvHP+qCoHk6mKGxwEj5k
 E1UEG4S6k6zNqjLwmTBBbk8sLMl/WVo6RMSMz+JflatgPmVZco4EX2O73iKGAJVU
 5GfHIUG9Yl4+aTIUORu59cWxOCApK0kqERrFKe412BMurXlLfqVcr/H2tiiuWnn1
 cEJ9d+uBd8IxTIQX0iEYGUAkX97mhxGUYdqGQuGJSV+MOfWX1zNP1sI4EscLGKQj
 sDDZScCaguM4xE20Jum1
 =od7u
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs.

  A handful of driver changes this time around. The larger changes are:

   - Reset drivers for hi3660 and zx2967

   - AHCI driver for Davinci, acked by Tejun and brought in here due to
     platform dependencies

   - Cleanups of atmel-ebi (External Bus Interface)

   - Tweaks for Rockchip GRF (General Register File) usage (kitchensink
     misc register range on the SoCs)

   - PM domains changes for support of two new ZTE SoCs (zx296718 and
     zx2967)"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  soc: samsung: pmu: Add register defines for pad retention control
  reset: make zx2967 explicitly non-modular
  reset: core: fix reset_control_put
  soc: samsung: pm_domains: Read domain name from the new label property
  soc: samsung: pm_domains: Remove message about failed memory allocation
  soc: samsung: pm_domains: Remove unused name field
  soc: samsung: pm_domains: Use full names in subdomains registration log
  sata: ahci-da850: un-hardcode the MPY bits
  sata: ahci-da850: add a workaround for controller instability
  sata: ahci: export ahci_do_hardreset() locally
  sata: ahci-da850: implement a workaround for the softreset quirk
  sata: ahci-da850: add device tree match table
  sata: ahci-da850: get the sata clock using a connection id
  soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register
  memory: atmel-ebi: Enable the SMC clock if specified
  soc: samsung: pmu: Remove unused and duplicated defines
  memory: atmel-ebi: Properly handle multiple reference to the same CS
  memory: atmel-ebi: Fix the test to enable generic SMC logic
  soc: samsung: pm_domains: Add new Exynos5433 compatible
  soc: samsung: pmu: Add dummy support for Exynos5433 SoC
  ...
 2017-02-23 15:57:04 -08:00
Olof Johansson
2998954c40 Drivers for 4.11 #2: 
- more EBI fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEl0I5XWmUIrwBfFMm2KKDO9oT4sIFAliLx1UACgkQ2KKDO9oT
 4sJMNQ//e6D1s+u/vT4E9HhYdgxtf/5aniWRKyG/KrP75xG16DocBrPxKX+FjZYR
 kCu67jh0OYvtU6GneKVM3NrbdefMTA8vDjoNur6BYL2lV8ZGu7tdSCEr3sOFja2X
 yN83ylwA9Z8b+sv5fV+JNGGrwsT83Y0OFN2qyp+ivOdOY6ozy7kA9hbaW0LfiMtK
 taB9EZYULBnIrBOigNX68yG8ArWy9iPK6O1LE7tfPimJ6z4IsyTIaqXr6XYhnqtc
 vl7GrEVC23XC4u8giSMxhflmzOYLv0EyCEC2U1Jb8l6XuHqfRcKPj52c4APqdlF6
 OMu23nrJ6eVenH9IUgWDzleNsCyblQm20EUtD3ADeBNhTSBJSE9kg6gs6XtHAzjS
 mkiKMqlj04F3wST0sDCHwY8oZyRJ8hCgjqt7PTxo4nSadl9Z1Oe4PnnJhkqEVQxu
 6MIGOyqp+TntMTPAR0S4e/wDarRF3KRf0J5n/x/ceixzd/Cx4ysSg94insftVjM0
 TfImgZSNAs8P1NaISPg8/1OHxz3X34f7i/i16gRb02hsyNPNJjV4UFOUzKoykOWT
 +jCnDxr3X1ZVSliGMN7+vgSMRdFLu/l1N9w4PJPRxSPadQcjJV7NwdgexD/OLFNS
 w8wocMyCaG4Tcb69RMYdW4AhRUAT4zOoKMoPlLMGP1mmxeJk5AE=
 =udxv
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.11-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers

Drivers for 4.11 #2:

 - more EBI fixes

* tag 'at91-ab-4.11-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  memory: atmel-ebi: Enable the SMC clock if specified
  memory: atmel-ebi: Properly handle multiple reference to the same CS
  memory: atmel-ebi: Fix the test to enable generic SMC logic

Signed-off-by: Olof Johansson <olof@lixom.net>
 2017-01-29 21:05:16 -08:00
Olof Johansson
95f4e568eb memory: tegra: Changes for v4.11-rc1 
This contains a single commit that plugs a potential device node leak in
 error handling code.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAliLD8sTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoZBLEACy9x8owEO7lcEEUZNYPGPOs9HzKJ2E
 r4G2z9Q7y5qW5+OIb4xTAX6A5khntOA3o9tm0nW3XKBLk1yaUTmRc4nGTdoDjDyp
 gBu1GJHKBvJuP8GRLUBesisIBsl5PoY3XYRnTiKWNkEeYqn/NWvWLjhFR5r7XmzR
 fJUaniCY3rVzYZUuq9YQb1CD1YERKUJ9twloAZ+8shsqTz1UznrbwqiyHrBP6VlH
 7PIc3aXyyGZwt3+tPg6UEjqRLXbBpILx9tbH1nfQYLslFDPD+Y6Gc3zmMX1VXu2w
 XZr8WkjrdYTxxho/KyI/fyLFRs1vyFaevq09uGi34VTGO8GLDvgdJP6vcMssLQRp
 i/QAxakA03aBUx8zMrDkOfO46Qm2OJ+AOcffSy8GWlm3nWIB85JN7QTUfTsRVtvG
 Jr8ub9bKnuaCOm/WJlOlFg/xIsA4OMLwblzBuZzzDlLXL25TEwKhYI7/ww7hSdld
 O8Q4XAmvBStODO97ErcjQkroquhaixMWrlZfFCpFA/3Ne17Z+k2+ETMhkaTWvLXX
 TlW7Lb/UUISL1mWuf4wNUmRLTyyAA+NHXEqxhBswsA4EqneIeTkjAFO6dUFN61zx
 Ce92+PkaKBth8pThav/vRlwrMFe3cweXzlzunSfeP+XoAfxw/qqYiLG8BLXGazji
 +xlxnVLq9oIEng==
 =vWHP
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.11-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

memory: tegra: Changes for v4.11-rc1

This contains a single commit that plugs a potential device node leak in
error handling code.

* tag 'tegra-for-4.11-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: Add a missing 'of_node_put()' call

Signed-off-by: Olof Johansson <olof@lixom.net>
 2017-01-29 20:57:59 -08:00
Boris Brezillon
87108dc78e memory: atmel-ebi: Enable the SMC clock if specified 
Newer versions of the SMC block requires the SMC clock to be enabled
before the SMC logic can be used.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2017-01-27 10:28:54 +01:00
Boris Brezillon
987e079eca memory: atmel-ebi: Properly handle multiple reference to the same CS 
Some devices are defining several sub-ranges within the same CS iomem
range. In this case, we should not duplicate the EBI device config.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2017-01-27 10:15:56 +01:00
Boris Brezillon
427456e477 memory: atmel-ebi: Fix the test to enable generic SMC logic 
We should test the apply value and not the ret one here.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: 6a4ec4cd08 ("memory: add Atmel EBI (External Bus Interface) driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2017-01-27 10:15:56 +01:00
Christophe Jaillet
b92f4380a1 memory: tegra: Add a missing 'of_node_put()' call 
If 'of_find_device_by_node()' fails, an 'of_node_put()' call is missing in
the error handling path.
Fix it by reordering the code.

While at it, remove some empty lines in a more or less similar construction
a few lines below.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2017-01-25 07:57:13 +01:00
Bartosz Golaszewski
f95bd04120 memory: aemif: allow passing device lookup table as platform data 
TI aemif driver creates its own subnodes of the device tree in order
to guarantee that all child devices are probed after the AEMIF timing
parameters are configured.

Some devices (e.g. da850) use struct of_dev_auxdata for clock lookup
but nodes created from within the aemif driver can't access the lookup
table.

Create a platform data structure that holds a pointer to
of_dev_auxdata so that we can use it with of_platform_populate().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2017-01-19 12:42:25 +01:00
Boris Brezillon
ee19428950 memory/atmel-ebi: Fix ns <-> cycles conversions 
at91sam9_ebi_get_config() is incorrectly converting timings in clock
cycles into timings in nanoseconds by multiplying the cycle values by
the clk rate instead of the clk period.

at91sam9_ebi_xslate_config() has the same problem for the
tdf_ns -> tdf_cycles conversion.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Chris Leahy <leahycm@gmail.com>
Fixes: 6a4ec4cd08 ("memory: add Atmel EBI (External Bus Interface) driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2017-01-10 16:01:34 +01:00
Arnd Bergmann
11128b9021 Fixes for drivers already queued to prevent 
section mismatch warnings introduced by them.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYPAvyAAoJEGFBu2jqvgRNBX8P/18aAXYPc/T0+mD3kl+TCvgg
 3fZUvdjb6dKxe7uGCp0KAL/pg1TkOKx6jm5uquBYLv9u7Bn1DuSU0n0gqSgrKLM1
 hjP4JawraxmwS2g3kwquLukyokUMFxoSgNS9vR1oWUMzFhEPEgGmGOjh9kv36HwQ
 qL/O93c5NBtczmcWpX5Cjs7HxfS6a4OgwYVZozcQdCnNSKwCfs5SmO9LDhGCZAT1
 J+Z0z+7Od7evjZkIPcnzjT/A5hvZo4ult5gIot8Bj4vrYwPEKg+5yWVlwZNFE4U6
 eV1ucoa+Q0MNnoBHDGHwnUIMtfPuIwOunePyizub1dmzLSZEjbAq3wqi8gvZPvKC
 /xNcXm0KxP+fyih1eOzl+SYhTibjBrn8su89n7Nx7BAkXPu1cBL+UR7019QAdv/Z
 8A6pQaWRYlVX8ieUc70v0m3E5Oc5Y9gIYur6E4yCHnxdfxnYc3NKmFDa/iaRP77K
 UlUnW4sS/ib0ev5K3c6Km1DE9ovbJyhMvKQQMSvhAWyAl4j026hrAH5hvjipNkkE
 xShqG8NZ4w5xIpuhsBP0eSL03DwJuQ3qUjIuZnSRWoPEP5pXcSgMMLmkwp+tZqhm
 qZrW/GeR2oiQV8ZFjDJeeGjpt++1l+wDU/SV1im725A1AOt/zQ2ECQtBXo6VCf6w
 /1Ph06VAhqkhXSHwIUHe
 =45Yb
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.10/drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers

Pull "DaVinci driver updates for v4.10 (part 2)" from Sekhar Nori:

Fixes for drivers already queued to prevent
section mismatch warnings introduced by them.

* tag 'davinci-for-v4.10/drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
  bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
 2016-11-30 14:58:00 +01:00
Bartosz Golaszewski
d0c7546f62 memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() 
In order to avoid a section mismatch drop the call to
of_flat_dt_get_machine_name() when printing the error message.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
 2016-11-23 20:26:42 +05:30
Olof Johansson
555b2b5d25 Drivers for 4.10: 
- few fixes for the memory drivers
  - minimal security module driver
  - support for the Secure SRAM
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJYKgVyAAoJENiigzvaE+LCklUP/imbZ7nV0IVxiajDDPSNSkho
 1Bu+0TV0DZJ0tx055suKS9uC9zWGEdSJhbvKZdjixB2TC4DAVDZO0Xx2Gj+Ux2HP
 wiMgtDfvgSyFjp6PGWo/sspgAM/WbA7G7x/f0x7JCE8TpyrqEnN0bbiabH7L6X2g
 K8u2KEywQdg/lOgr177fwFSwBlOx0BaHodvrXNqI58VQGNpcqv0l/8TgiPPdY0w9
 fhg1JCvkZtDbAYgDmCvenGGF0IskjAWwi9fCXL+hsKurLYrS5udFFZLUvnFieKtN
 4zTyzb8LtD9EUuawK6fGe5wHo786A4VCX2fQ7lKYyBT4ysJ7baeTfZGK3XGn0one
 BVlyeLVZw4p65esx12fEkB2Nm7YSlKp64Jd/8wYPW5doSd/HaPG9MbWeVlRhmQYr
 f5Frn2oiBbkh414LjpARkDY2ZY1fmqVfLZ6A3FUktIsocULDMEa3rzNAG0VQyAlx
 9PnW05/HQnVVhtmfv9+wgMVH5ZJmQLZnkmgX35mjoo5cRvpBqxsif/3Ul0lGb4Y3
 IZDIVBiZpnBPF9OpJ+cTexOsXT/UVcHpjOT7MT72NprVF0OpfkI5TSa79eQX6bmD
 TiabMkE5RmVkaQVuIlErut0gxvGl72N93F3LDDP1ZYWaYmU4u/JirImuhw/e+U5v
 00JrVYaM6TDahSl2PMO6
 =/UOn
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.10-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers

Drivers for 4.10:

 - few fixes for the memory drivers
 - minimal security module driver
 - support for the Secure SRAM

* tag 'at91-ab-4.10-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  misc: sram: add Atmel securam support
  misc: sram: document new compatible
  ARM: at91: add secumod register definitions
  Documentation: dt: atmel-at91: Document secumod bindings
  memory: atmel-sdramc: use builtin_platform_driver to simplify the code
  memory: atmel-ebi: fix return value check in at91_ebi_dev_disable()

Signed-off-by: Olof Johansson <olof@lixom.net>
 2016-11-18 09:53:55 -08:00
Bartosz Golaszewski
62a8a73923 memory: davinci: add support for da8xx DDR2/mDDR controller 
Create a new driver for the da8xx DDR2/mDDR controller and implement
support for writing to the Peripheral Bus Burst Priority Register.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
 2016-11-14 17:18:34 +05:30
Wei Yongjun
af69240060 memory: atmel-sdramc: use builtin_platform_driver to simplify the code 
Use the builtin_platform_driver() macro to make the code simpler.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2016-10-20 11:59:57 +02:00
Wei Yongjun
ecc2d430fa memory: atmel-ebi: fix return value check in at91_ebi_dev_disable() 
Fix the retrn value check which testing the wrong variable
in at91_ebi_dev_disable().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2016-10-20 11:59:22 +02:00
Linus Torvalds
6afd563d4b ARM: SoC driver updates for v4.9 
Driver updates for ARM SoCs, including a couple of newly added drivers:
 
 - The Qualcomm external bus interface 2 (EBI2), used in some of their
   mobile phone chips for connecting flash memory, LCD displays or
   other peripherals
 
 - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the
   EFUSE based on that firmware interface.
 
 - Perf support for the AppliedMicro X-Gene performance monitor unit
 
 - Reset driver for STMicroelectronics STM32
 
 - Reset driver for SocioNext UniPhier SoCs
 
 Aside from these, there are minor updates to SoC-specific bus,
 clocksource, firmware, pinctrl, reset, rtc and pmic drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gaimCrR//JCVInAQJaOQ/6A++YfLVmdF4wxgcu/0ti28lA7SkQIGJV
 UAsfCmqMEutbeDvnloVGmTV2K2NS7mzxdxsJGbVB7Oe/zdOFN+T9sf9hAlId01QA
 oVkoagpofoxlyKoKJ/l+heuEEZMa0Ekk3XXRTGv/Ovymo7252o4tEdGu9c+gyaMJ
 KqgixcrQRzxuWDgPpHUPUez2vY1iRMvvdcb0EmfiHcIgPOEJc6MIxulsqEIrkoMz
 WYeGFIeqRJxnrur3QD8WnD+aZD6bV01wkFTkWXGWg4H87QfEESgVBu5A7TL+5sL8
 1SlX/b7S5/ZJbrOiOS2IUyvbK7NiA/Q+NunHW2rMVnUWuEvJ9HAQB1kVSQH5LIYO
 6OBokjcijm6m/j6O6fdDfvNd6PLsIEUqfWVws7O+uofMMqKPxqak4VBTRdFM+aeF
 ZtK7mEbzteCX0bnC+XblZrseAlkIehYnP80CLDbtDTerTWP4gsjxGVt3U6MO0NzB
 K0ACWZOclzrcFscNKrmP6uPCpfZriiPV/XMCEHcylA/X2iYsVmpqKzdLuNs5aeUr
 uPzQbNWu9ygg/bDRXMYY2E3Kzjsc0eIOKEOPyhLaZdSo4e1FQxud6L2V2Vj0RLB/
 iMA7/CyQZqn6Yzgs0VMZm/bnh+hIdHioGFl5K5j6Fcw9VZRkNmnEQJzX4VU5efGO
 g1+5av0vFXg=
 =GvTq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - The Qualcomm external bus interface 2 (EBI2), used in some of their
     mobile phone chips for connecting flash memory, LCD displays or
     other peripherals

   - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
     the EFUSE based on that firmware interface.

   - Perf support for the AppliedMicro X-Gene performance monitor unit

   - Reset driver for STMicroelectronics STM32

   - Reset driver for SocioNext UniPhier SoCs

  Aside from these, there are minor updates to SoC-specific bus,
  clocksource, firmware, pinctrl, reset, rtc and pmic drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  bus: qcom-ebi2: depend on HAS_IOMEM
  pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
  clk: mvebu: Add clk support for the orion5x SoC mv88f5181
  dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
  clocksource: exynos_mct: Add the support for ARM64
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
  bus: qcom: add EBI2 driver
  bus: qcom: add EBI2 device tree bindings
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  soc: qcom: smd: Reset rx tail rather than tx
  memory: atmel-sdramc: fix a possible NULL dereference
  reset: hi6220: allow to compile test driver on other architectures
  reset: zynq: add driver Kconfig option
  reset: sunxi: add driver Kconfig option
  reset: stm32: add driver Kconfig option
  reset: socfpga: add driver Kconfig option
  ...
 2016-10-07 21:23:40 -07:00
Linus Torvalds
7a53eea1f7 Char/Misc driver update for 4.9-rc1 
Here's the "big" char and misc driver update for 4.9-rc1.
 
 Lots of little things here, all over the driver tree for subsystems that
 flow through me.  Nothing major that I can discern, full details are in
 the shortlog.
 
 All have been in the linux-next tree with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFUEABECABYFAlfyOIQPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsp9OQAlRy3
 gSKfQUlXjTs96Bx/I5PtWysAn0r8nyKZoP1oSgsTddOCEeXngTXc
 =4uPs
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the "big" char and misc driver update for 4.9-rc1.

  Lots of little things here, all over the driver tree for subsystems
  that flow through me. Nothing major that I can discern, full details
  are in the shortlog.

  All have been in the linux-next tree with no reported issues"

* tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (144 commits)
  drivers/misc/hpilo: Changes to support new security states in iLO5 FW
  at25: fix debug and error messaging
  misc/genwqe: ensure zero initialization
  vme: fake: remove unexpected unlock in fake_master_set()
  vme: fake: mark symbols static where possible
  spmi: pmic-arb: Return an error code if sanity check fails
  Drivers: hv: get rid of id in struct vmbus_channel
  Drivers: hv: make VMBus bus ids persistent
  mcb: Add a dma_device to mcb_device
  mcb: Enable PCI bus mastering by default
  mei: stop the stall timer worker if not needed
  clk: probe common clock drivers earlier
  vme: fake: fix build for 64-bit dma_addr_t
  ttyprintk: Neaten and simplify printing
  mei: me: add kaby point device ids
  coresight: tmc: mark symbols static where possible
  coresight: perf: deal with error condition properly
  Drivers: hv: hv_util: Avoid dynamic allocation in time synch
  fpga manager: Add hardware dependency to Zynq driver
  Drivers: hv: utils: Support TimeSync version 4.0 protocol samples.
  ...
 2016-10-03 19:57:49 -07:00
Arnd Bergmann
e747ea14de Drivers for 4.9: 
- Coccinelle fixes for atmel-ebi and atmel-sdramc
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJX2Qy6AAoJENiigzvaE+LCW4YP/iWOwQaKm3C1rMHVrvfv2phS
 4nZEeFMDmDhNoLpX2v4JPhI3TV6R5f+2zaO4YrfoVreUPFkpALL6lSaUa1LDNlrg
 qpOBKSTmmpDH/9wSqQG2dY41O6slNII0EAwWvo6ctkLTiDOE02HUdlAHRmxbKEPQ
 B7JEaApUKSvlGo6mVCMOF38F4E+eBL+i5SlEsbSrqcQ9HIkbw8c2ts0v+3ly+aUF
 m+TT6KmG46kV6WaXWHw5JhCnJdNF0/snEaON7vzAr21j2FFSls2JIGywWBPJ4HN/
 9KT79p6OLJwuaS3VwKjg3BGApsBiPJKrXQyXT9gI7BO1/PdZdzFsXz65aMo6qlXd
 WtYKjCZuzuzxIzCXDFtz1aj7E46F5x7bUVTuBBrvMSI8RkwJfEpSx1X9F/qIdHuV
 Vp4+ckqCicaND8D/hqwfv2Zx6jIAG/9L6g08OzP/3A5ZgpcXk4hJ1wFCpssegXJa
 VYooqeTFNxB44k1UbmA2hf3qz+Fw0lt0v2aF/KPTTp3ozb/epcEzQVImPCiKMIjK
 Ead7W8lowxHFyVZRa0wrpgID0Laxn1b2Px2WQG/V9JQzZzSmD94T2HDSc3simOQi
 L7dvy+ABg9ZaVwZSXIckwG+c9tVYwJy1dspAMUW7TcXqDkyLVNhA56oxBZN3Rg3H
 Gop+/hFP2q0KfahejmKq
 =QhIH
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.9-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers

Pull "at91 drivers for 4.9" from Alexandre Belloni:

 - Coccinelle fixes for atmel-ebi and atmel-sdramc

* tag 'at91-ab-4.9-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  memory: atmel-sdramc: fix a possible NULL dereference
  memory: atmel-ebi: use PTR_ERR_OR_ZERO() to simplify the code
 2016-09-15 00:17:39 +02:00
Arnd Bergmann
9064a1c77d Merge commit 'http://github.com/rogerq/linux gpmc-omap-v4.8-rc1' into next/drivers 
This is also going to be part of v4.8 and sent as a bugfix,
merging it here to avoid a small conflict against the other
gpmc changes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2016-09-03 00:52:11 +02:00
LABBE Corentin
7922118f8f memory: atmel-sdramc: fix a possible NULL dereference 
of_match_device could return NULL, and so cause a NULL pointer
dereference later.

For fixing this problem, we use of_device_get_match_data(), this will
simplify the code a little by using a standard function for
getting the match data.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2016-08-31 19:19:16 +02:00
Baoyou Xie
aeb83d7054 fix:memory:of_memory:add missing header dependencies 
We get 2 warnings when biuld kernel with W=1:
drivers/memory/of_memory.c:30:30: warning: no previous prototype for 'of_get_min_tck' [-Wmissing-prototypes]
drivers/memory/of_memory.c:106:30: warning: no previous prototype for 'of_get_ddr_timings' [-Wmissing-prototypes]

In fact, these functions are declared in drivers/memory/of_memory.h
so this patch add missing header dependencies.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2016-08-31 15:21:18 +02:00
Baoyou Xie
3950fffdf0 memory: omap-gpmc: make gpmc_clk_ticks_to_ns() static 
We get 1 warning when build kernel with W=1:
drivers/memory/omap-gpmc.c:354:14: warning: no previous prototype for 'gpmc_clk_ticks_to_ns' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is declared
and don't need a declaration, but can be made static.
so this patch marks it 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2016-08-29 11:00:24 +03:00
Linus Walleij
525fe43f55 memory: omap-gpmc: use devm_gpiochip_add_data() 
This saves a few codelines in the driver.

Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2016-08-29 11:00:23 +03:00
Markus Elfring
3f41a3c467 memory: omap-gpmc: Delete an unnecessary check before the function call "gpiochip_free_own_desc" 
The gpiochip_free_own_desc() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2016-08-29 11:00:22 +03:00
Wei Yongjun
ee4fec5f44 memory: atmel-ebi: use PTR_ERR_OR_ZERO() to simplify the code 
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.

Generated by coccinelle.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2016-08-08 12:12:29 +02:00
Johan Hovold
23540d6e2f memory: omap-gpmc: allow probe of child nodes to fail 
A recent commit (inadvertently?) changed how failed probe of a gpmc
child node was handled. Instead of proceeding with setting up any other
children as before, a single error now aborts the whole process.

This change broke networking on some Overo boards due to probe failing
for an unrelated nand node. This second issue should obviously be
fixed, but let's restore the old behaviour of allowing child-node
probe to fail to avoid further similar breakage on other systems.

Fixes: d2d00862df ("memory: omap-gpmc: Support general purpose input
for WAITPINs")

Cc: stable@vger.kernel.org  # v4.7+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2016-08-08 11:18:40 +03:00
Linus Torvalds
affe8a2abd MTD updates for v4.8: 
NAND:
 
   Updates from Boris:
 
     """
     This pull request contains only one notable change:
     * Addition of the MTK NAND controller driver
 
     And a bunch of specific NAND driver improvements/fixes. Here are the
     changes that are worth mentioning:
     * A few fixes/improvements for the xway NAND controller driver
     * A few fixes for the sunxi NAND controller driver
     * Support for DMA in the sunxi NAND driver
     * Support for the sunxi NAND controller IP embedded in A23/A33 SoCs
     * Addition for bitflips detection in erased pages to the brcmnand driver
     * Support for new brcmnand IPs
     * Update of the OMAP-GPMC binding to support DMA channel description
     """
 
   In addition, some small fixes around error handling, etc., as well as one
   long-standing corner case issue (2.6.20, I think?) with writing 1 byte less
   than a page.
 
 NOR:
 
  * Rework some error handling on reads and writes, so we can better handle (for
    instance) SPI controllers which have limitations on their maximum transfer size
 
  * Add new Cadence Quad SPI flash controller driver
 
  * Add new Atmel QSPI flash controller driver
 
  * Add new Hisilicon SPI flash controller driver
 
  * Support a few new flash, and update supported features on others
 
  * Fix the logic used for detecting a fully-unlocked flash
 
 And other miscellaneous small fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXn/j0AAoJEFySrpd9RFgto58P/j1huB0d21zFen3teo8YKKr1
 dLi65mFbqtpU1BLqD07uc2gsH17kvezFJCtx8H8Jp/yCjLF2kYIKL7wDTf6OJPtn
 aYGS5dG5jhMIq+6CD2olKqy+IVLfL9GvCf44Z3fpVta5lOn09y7Jm0AkBjmJcH45
 SdJi+iUkSKhqRY3O2udyauGyL4JWG7eHUonrG9g8ROrO0GWQkT4Ijm1ZwIBlFDkJ
 e1N960OqPg5ISOzuTeM14Ok9IUyeb7wiXhqRfOJgzNk6iBcN1YC2ono3C7RH2sN7
 wiyCqqUpDDCDBDiFdGOdpc9cjzNysrt02ypWRsZIpQVCm89nPLSutqQEWLuo0qzq
 /eIzdwbk1AxX96CeQohOezqL+n6+RHP9AIvwzL9GeWjipD1LBvfM1l3CmuSKK5jb
 bQ4CA/FVz1tO/25q8tuLJfpFzhFE2PC3pphVf8tREL/U6OR/97NgDMuQIuqiQpRc
 4nJtu79yacAzEiztZh0bsx+t94QFE+kfs/6d8m+llLEyx2sI8HKZeDvNRwEB0OsD
 wQ5bjyd54m7+i4H8njrnOTP+K2YrwNjGlbTo7qrRSpFMDr4mD0VQLap03Srvo5xV
 OYB6uGZhGV2L3k6nG5wywM2z6Hw0QfHxjrpcLyG51xABmni2QF3lOdYSllRtRTXp
 aYLfPUqgIgSUI2GTDHyW
 =HQr0
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

    Quoting Boris:
     'This pull request contains only one notable change:
       - Addition of the MTK NAND controller driver

      And a bunch of specific NAND driver improvements/fixes. Here are the
      changes that are worth mentioning:
       - A few fixes/improvements for the xway NAND controller driver
       - A few fixes for the sunxi NAND controller driver
       - Support for DMA in the sunxi NAND driver
       - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs
       - Addition for bitflips detection in erased pages to the brcmnand driver
       - Support for new brcmnand IPs
       - Update of the OMAP-GPMC binding to support DMA channel description'

    In addition, some small fixes around error handling, etc., as well
    as one long-standing corner case issue (2.6.20, I think?) with
    writing 1 byte less than a page.

  NOR:

   - rework some error handling on reads and writes, so we can better
     handle (for instance) SPI controllers which have limitations on
     their maximum transfer size

   - add new Cadence Quad SPI flash controller driver

   - add new Atmel QSPI flash controller driver

   - add new Hisilicon SPI flash controller driver

   - support a few new flash, and update supported features on others

   - fix the logic used for detecting a fully-unlocked flash

  And other miscellaneous small fixes"

* tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits)
  mtd: spi-nor: don't build Cadence QuadSPI on non-ARM
  mtd: mtk-nor: remove duplicated include from mtk-quadspi.c
  mtd: nand: fix bug writing 1 byte less than page size
  mtd: update description of MTD_BCM47XXSFLASH symbol
  mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller
  mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver
  mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd
  mtd: pmcmsp-flash: Allocating too much in init_msp_flash()
  mtd: maps: sa1100-flash: potential NULL dereference
  mtd: atmel-quadspi: add driver for Atmel QSPI controller
  mtd: nand: omap2: fix return value check in omap_nand_probe()
  Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  mtd: spi-nor: add hisilicon spi-nor flash controller driver
  mtd: spi-nor: support dual, quad, and WP for Gigadevice
  mtd: spi-nor: Added support for n25q00a.
  memory: Update dependency of IFC for Layerscape
  mtd: nand: jz4780: Update MODULE_AUTHOR email address
  mtd: nand: sunxi: prevent a small memory leak
  mtd: nand: sunxi: add reset line support
  mtd: nand: sunxi: update DT bindings
  ...
 2016-08-02 17:05:11 -04:00
Linus Torvalds
43a0a98aa8 ARM: SoC driver updates for v4.8 
Driver updates for ARM SoCs.
 
 A slew of changes this release cycle. The reset driver tree, that we merge
 through arm-soc for historical reasons, is also sizable this time around.
 
 Among the changes:
 
  - clps711x: Treewide changes to compatible strings, merged here for simplicity.
  - Qualcomm: SCM firmware driver cleanups, move to platform driver
  - ux500: Major cleanups, removal of old mach-specific infrastructure.
  - Atmel external bus memory driver
  - Move of brcmstb platform to the rest of bcm
  - PMC driver updates for tegra, various fixes and improvements
  - Samsung platform driver updates to support 64-bit Exynos platforms
  - Reset controller cleanups moving to devm_reset_controller_register() APIs
  - Reset controller driver for Amlogic Meson
  - Reset controller driver for Hisilicon hi6220
  - ARM SCPI power domain support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnm1XAAoJEIwa5zzehBx35lcP/ApuQarIXeZCQZtjlUBV9McW
 o3o7FhKFHePmEPeoYCvVeK5D8NykTkQv3WpnCknoxPJzxGJF7jbPWQJcVnXfKOXD
 kTcyIK15WL2HHtSE3lYyLfyUPz8AbJyRt0l0cxgcg6jvo+uzlWooNz1y78rLIYzg
 UwRssj7OiHv4dsyYRHZIsjnB8gMWw8rYMk154gP2xy6MnNXXzzOVVnOiVqxSZBm+
 EgIIcROMOqkkHuFlClMYKluIgrmgz1Ypjf+FuAg7dqXZd+TGRrmGXeI7SkGThfLu
 nyvY3N18NViNu7xOUkI9zg7+ifyYM8Si9ylalSICSJdIAxZfiwFqFaLJvVWKU1rY
 rBOBjKckQI0/X9WYusFNFHcijhIFV8/FgGAnVRRMPdvlCss7Zp03C9mR4AEhmKMX
 rLG49x81hU1C+LftC59ml3iB8dhZrrRkbxNHjLFHVGWNrKMrmJKa8JhXGRAoNM+u
 LRauiuJZatqvLfISNvpfcoW2EashVoU3f+uC8ymT3QCyME3wZm0t7T4tllxhMfBl
 sOgJqNkTKDmPLofwm/dASiLML7ZF1WePScrFyOACnj9K4mUD+OaCnowtWoQPu0eI
 aNmT84oosJ2S9F/iUDPtFHXdzQ+1QPPfSiQ9FXMoauciVq/2F+pqq68yYgqoxFOG
 vmkmG2YM4Wyq43u0BONR
 =O8+y
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.

  A slew of changes this release cycle.  The reset driver tree, that we
  merge through arm-soc for historical reasons, is also sizable this
  time around.

  Among the changes:

   - clps711x: Treewide changes to compatible strings, merged here for simplicity.
   - Qualcomm: SCM firmware driver cleanups, move to platform driver
   - ux500: Major cleanups, removal of old mach-specific infrastructure.
   - Atmel external bus memory driver
   - Move of brcmstb platform to the rest of bcm
   - PMC driver updates for tegra, various fixes and improvements
   - Samsung platform driver updates to support 64-bit Exynos platforms
   - Reset controller cleanups moving to devm_reset_controller_register() APIs
   - Reset controller driver for Amlogic Meson
   - Reset controller driver for Hisilicon hi6220
   - ARM SCPI power domain support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data
  soc: raspberrypi-power: add CONFIG_OF dependency
  firmware: scpi: add CONFIG_OF dependency
  video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
  input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
  pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
  serial: clps711x: Changing the compatibility string to match with the smallest supported chip
  irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
  clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
  clk: clps711x: Changing the compatibility string to match with the smallest supported chip
  ...
 2016-08-01 18:36:01 -04:00
Linus Torvalds
dd9671172a IOMMU Updates for Linux v4.8 
In the updates:
 
 	* Big endian support and preparation for defered probing for the
 	  Exynos IOMMU driver
 
 	* Simplifications in iommu-group id handling
 
 	* Support for Mediatek generation one IOMMU hardware
 
 	* Conversion of the AMD IOMMU driver to use the generic IOVA
 	  allocator. This driver now also benefits from the recent
 	  scalability improvements in the IOVA code.
 
 	* Preparations to use generic DMA mapping code in the Rockchip
 	  IOMMU driver
 
 	* Device tree adaption and conversion to use generic page-table
 	  code for the MSM IOMMU driver
 
 	* An iova_to_phys optimization in the ARM-SMMU driver to greatly
 	  improve page-table teardown performance with VFIO
 
 	* Various other small fixes and conversions
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJXl3e+AAoJECvwRC2XARrjMIgP/1Mm9qIfcaAxKY4ByqbVfrH8
 313PO6rpwUhhywUmnf/1F/x+JbuLv8MmRXfSc106mdB1rq9NXpkORYKrqVxs0cSq
 6u6TzZWbF6WN1ipqXxDITNFBSy7u97K1VuFaKyYFfLbg8xrkcdkMZJ7BqM2xIEdk
 rnRKcfHo6wsmCXJ6InsUPmKAqU6AfMewZTGjO+v77Gce0rZEbsJ8n7BRKC9vO2bc
 akvN2W+zzEUSyhbuyYQBG+agpmC5GJvz4u+6QvAP5sxTWfAsnwAoPpP4xxR+/KjT
 eicHlja4v0YK6Hr4AJaMxoKfKIrCdqpWm0D2tg/edyWZCeg98AW/w7/s0I8OD3ao
 Otj6IqC8nPk0pYciOeEPQ7aqPbvKAqU2FYWt7lWamrdr98u2R3p2nXGl0KthoAj6
 JqzrCZXvBS7sj1IPLlGpj939yvbKbjpE0p7y1qhI1VEBXoBWFNvlKydkYx76BTGK
 F6paGVqn2Zwy00AqAsylTEkvIK063zwShZ6nPqz4bMdVlgzjrjCzdDecjfbHr8Ic
 6D2oCwyF+RJ8qw+Ecm9EmWFik80sgb+iUTeeYEXNf+YzLYt5McIj7fi3N+sUPel3
 YJ4S4x0sIpgUZZ1i+rOo8ZPAFHRU6SRPYV+ewaeYKrMt+Un5dTn9SddpqrJdbiUu
 YrF36BaQjc123IRGKrSd
 =xiS2
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - big-endian support and preparation for defered probing for the Exynos
   IOMMU driver

 - simplifications in iommu-group id handling

 - support for Mediatek generation one IOMMU hardware

 - conversion of the AMD IOMMU driver to use the generic IOVA allocator.
   This driver now also benefits from the recent scalability
   improvements in the IOVA code.

 - preparations to use generic DMA mapping code in the Rockchip IOMMU
   driver

 - device tree adaption and conversion to use generic page-table code
   for the MSM IOMMU driver

 - an iova_to_phys optimization in the ARM-SMMU driver to greatly
   improve page-table teardown performance with VFIO

 - various other small fixes and conversions

* tag 'iommu-updates-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
  iommu/amd: Initialize dma-ops domains with 3-level page-table
  iommu/amd: Update Alias-DTE in update_device_table()
  iommu/vt-d: Return error code in domain_context_mapping_one()
  iommu/amd: Use container_of to get dma_ops_domain
  iommu/amd: Flush iova queue before releasing dma_ops_domain
  iommu/amd: Handle IOMMU_DOMAIN_DMA in ops->domain_free call-back
  iommu/amd: Use dev_data->domain in get_domain()
  iommu/amd: Optimize map_sg and unmap_sg
  iommu/amd: Introduce dir2prot() helper
  iommu/amd: Implement timeout to flush unmap queues
  iommu/amd: Implement flush queue
  iommu/amd: Allow NULL pointer parameter for domain_flush_complete()
  iommu/amd: Set up data structures for flush queue
  iommu/amd: Remove align-parameter from __map_single()
  iommu/amd: Remove other remains of old address allocator
  iommu/amd: Make use of the generic IOVA allocator
  iommu/amd: Remove special mapping code for dma_ops path
  iommu/amd: Pass gfp-flags to iommu_map_page()
  iommu/amd: Implement apply_dm_region call-back
  iommu/amd: Create a list of reserved iova addresses
  ...
 2016-08-01 07:25:10 -04:00
Linus Torvalds
f64d6e2aaa DeviceTree update for 4.8: 
- Removal of most of_platform_populate() calls in arch code. Now the DT
 core code calls it in the default case and platforms only need to call
 it if they have special needs.
 
 - Use pr_fmt on all the DT core print statements.
 
 - CoreSight binding doc improvements to block name descriptions.
 
 - Add dt_to_config script which can parse dts files and list
 corresponding kernel config options.
 
 - Fix memory leak hit with a PowerMac DT.
 
 - Correct a bunch of STMicro compatible strings to use the correct
 vendor prefix.
 
 - Fix DA9052 PMIC binding doc to match what is actually used in dts
 files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXm9KcAAoJEPr7XbWNvGHDRT4QAIIIOSB4AWHardnMLROgGge9
 aOQKZ/05O9feOcxYKe8FkQbcH+IujJjrUL+yrRD36yGQPAyBP21gtcmmfrkCcwFM
 kH915f/JbGvXpfwEf8dcarHhzYH6FFJiQGduPpWfwSSWynx+xq5EKPwCqYzMg8bN
 SExxt7vUx1MKFOExZ0K8BNCo8VMVLUWQoJ1DNeJDuL25Op4EU3i2l1HQNYV/3XDk
 BSA3x7Lw3GjrWEH20VWYn2Azq1OFLY+E2FC2lnG4nbkk5X8dZbUH9PR1Sk7uTQDj
 uxTjWe59NBpliCxKSAbMbTAU/WwSB1pJ0I+zDJBiQsdFT+nb5F4zOrs3qSKHa/A9
 Rv6AC8k5gdSMrDB1dOspfF2vWvOOInXgNV4/Kza0D92mbCpwyUuF+vhE6rfcMrZU
 OiD7rj2/fvO7Y9fUAhrp6zrfrOfH9B1Z9vS+940AlK96YwPE2+J0SA2vBxR/wg8H
 7fj4Ud5X+SFisXWQhh5Wlv0W9o6e7C7fsi8vpkQ7gufmezLFWVnJKsUfQaxGEwhG
 Hkhm9kuSHHMd+6dEnn2756DnNfJAtQv6rSR0/QR4Lf9y5L4dvR3kAQIci8X/nx4P
 sIk+IJWGZG6wziZq59hh+SO6HEqdSNuvh+5sbR0iUimdE/1HsDBdPiocXf/r8iwK
 NY9nGeZPRrXmFgdpoZfm
 =wLMr
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - remove most of_platform_populate() calls in arch code.  Now the DT
   core code calls it in the default case and platforms only need to
   call it if they have special needs

 - use pr_fmt on all the DT core print statements

 - CoreSight binding doc improvements to block name descriptions

 - add dt_to_config script which can parse dts files and list
   corresponding kernel config options

 - fix memory leak hit with a PowerMac DT

 - correct a bunch of STMicro compatible strings to use the correct
   vendor prefix

 - fix DA9052 PMIC binding doc to match what is actually used in dts
   files

* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
  xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
  xtensa: Fix build error due to missing include file
  MIPS: ath79: Add missing include file
  Fix spelling errors in Documentation/devicetree
  ARM: dts: fix STMicroelectronics compatible strings
  powerpc/dts: fix STMicroelectronics compatible strings
  Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
  scripts/dtc: dt_to_config - kernel config options for a devicetree
  of: fdt: mark unflattened tree as detached
  of: overlay: add resolver error prints
  coresight: document binding acronyms
  Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
  of: use pr_fmt prefix for all console printing
  of/irq: Mark initialised interrupt controllers as populated
  of: fix memory leak related to safe_name()
  Revert "of/platform: export of_default_bus_match_table"
  of: unittest: use of_platform_default_populate() to populate default bus
  memory: omap-gpmc: use of_platform_default_populate() to populate default bus
  bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
  ...
 2016-07-30 11:32:01 -07:00
Joerg Roedel
f360d3241f Merge branches 'x86/amd', 'x86/vt-d', 'arm/exynos', 'arm/mediatek', 'arm/msm', 'arm/rockchip', 'arm/smmu' and 'core' into next 2016-07-26 16:02:37 +02:00
Arnd Bergmann
f8c6d88b2c Samsung drivers/soc update for v4.8, part 3 
1. Fix size of allocation for Exynos SROM registers (too much was allocated).
 2. Constify fix.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXg8EAAAoJEME3ZuaGi4PXH2kP/im4hf/QbZ6+CCjAJilbg9kn
 QcvWdSQorhSPXo8WlbV1cM7RIEsZSs/GIEILEmK+CdGaFcFzzGugB96BceQR0Pkw
 HQY8QbVn2YduvePYa5LXafKNEsZKRwrRknhJw0WYDbrXGaDXfWURpZVNedz7w3CS
 DJDzVEw7JSYjhpeWOqg7fY9T5mZwInZhBhSJZ9FHTk3URioEX7dY+jBzLlQqfzdZ
 KFEhYFY3lOHcSw6ye0Lr+PJra+F5m5kplac4WlhxAsm0v5Kr9MuT1f9tPVDpWxDX
 jYIJfpD86RFwiJD39HxfJYHmfZ5sdTGVsWKRVP/3xjoTiUhxC1Takyeu3Uc0Mb45
 IjgAZA0QPJoilKBAusRHq8rsc0aZkCcfu7RWQHtsXpUxaHXnUcT0s/498t74Lerg
 WiSXl7HdkOkKckxHbLuB4h/FTWVZfGSHp5XM6cH/bJjwgXvzl7xol/B4bwQE6h8k
 irn5SyDAAeOIvuiLgi59k9iTZpPbXwfVwWrTGSCUNavOOV5yggZqJTEsO0iqBbwc
 m7B8L+tuu/DLqADHeZ+FRMfhqiWNJEZ9RMn8DaL0I+hhTesKBh8DPKCUoN1mrhb8
 AkaHSB6Xdm0Uu9AlDUAPgbaTCAEr2ur8dQS7QQLHv3jnJ53B0W2ylDRFy5L2Gp96
 5k51J/uD3dGZpJjbpdOt
 =7gEy
 -----END PGP SIGNATURE-----

Merge tag 'samsung-drivers-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Merge "Samsung drivers/soc update for v4.8, part 3" into next/drivers:

1. Fix size of allocation for Exynos SROM registers (too much was allocated).
2. Constify fix.

* tag 'samsung-drivers-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: pmu: Constify arrays with PMU data
  memory: samsung: exynos-srom: Fix wrong count of registers
 2016-07-14 15:26:44 +02:00
Raghav Dogra
8ea126bc1a memory: Update dependency of IFC for Layerscape 
This patch enables IFC NAND support on ARM layerscape platform.
It fixes the dependency to enable NAND. The include files are being modified
to ensure complilation for both PowerPC and ARM architectures.

Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
 2016-07-13 17:31:10 -07:00
Olof Johansson
e1d1dfc2c2 memory: tegra: Changes for v4.8-rc1 
Contains three reference count fixes from coccinelle.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXdn6bAAoJEN0jrNd/PrOhXy8P/Rz/UWWWl5NxpXgtE2izybV/
 Ymcz6IN+HSxCS1gPGrwk1nPfuAKMxG6TqfK6q/nOTKTfjbQdyMGXkyLYTtWIWvcN
 9noD25p/9GrsqzqsfVVnI/a2HXPGzCRU7Si4c14BYpgJn24oB9I12UKXUAqNZUms
 Y2WAFxXe0BVL6ypsMKJ3PmCqf5lxwNQRcc6LCb9djocHnzG388rirOkiMy6dQC4p
 8A0XzUxC/7ayFoAN5BEn/F5cfV5mtN7cdpFBgWB2e5UaLBG88QN8cw6fOvjxixay
 K7DGoae0rtDFy2F53wEE6qljsMcj9BU6ta3Mr7TQW2AImk6Eqr5uWvKlckqvZzHd
 7lqHfORjgL+Am873DMTB7sRxjD4amhfSoIkGz7OuXXR1sH7CTtvBTINFRxhoLVQu
 6U6QS/t1uzDiYBSWEKFJjOsDCOCGD33GTOhKS5OeHGMekfnwp3jlVEBi573z5XOw
 /SSDZ3ly6sHk3zOCyF5gc2y+pWP2Oo0OtMgSAHVgrtzfyE8t16PapOl5u3NJnSKX
 YujWLfnQhQGm1OOYJQxOXA/081Jlul8Q119ZZI1woeL3Nuj4N3YxAbnjvnSJktLV
 7GfCfzweDR9Bka/xwnZfqE4fB09PFBnskbev5fIVFzcmtNj711/hoDcFabeIcjJ/
 iwM5rKKyqsQchrKK3hRr
 =XgO5
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.8-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

memory: tegra: Changes for v4.8-rc1

Contains three reference count fixes from coccinelle.

* tag 'tegra-for-4.8-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: mc: Add missing of_node_put()
  memory: tegra: Delete unneeded of_node_put()
  memory: tegra: tegra124-emc: Add missing of_node_put()

Signed-off-by: Olof Johansson <olof@lixom.net>
 2016-07-06 22:33:47 -07:00
Seung-Woo Kim
24c4b47829 memory: samsung: exynos-srom: Fix wrong count of registers 
This patch fixes wrong count of array for SROM registers from probe
function.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
 2016-07-06 08:16:56 +02:00
Olof Johansson
f19786f95c Samsung drivers/soc update for v4.8, part 2: 
1. Endian-friendly fixes.
 2. Make SROMC driver explicitly non-module.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXdL5/AAoJEME3ZuaGi4PXmMMP/2vwmIKiog/AwKYma0WLRkwW
 HL1Dm5JQxlGLLdiJTQnbYRdkdbnkJkY0d7TXAV01FnMrs44cm5RmeEkotlE43ljD
 am+qcxLltLZ86KU+O5wzrqPaLbgTbHDglJ8f0b8+YK/rafer6sR+rIvJk7HpiHW0
 rmWuefNNcGQr29GwqeoUZbeqPCfsMUWxHH4j9P4U+tV3+qdU38kQ9592p+OESeYa
 wnDV+je6JTbKXFnwkfSFlCbPeFBZ3r3YXNIOctBo7CBEgPYpDwQjZlsHORqLNYNh
 tXjNfOyZSGgX9U+0NwwIPKV8E/WexImVZssu3ZLCA1h95nRF4RzkXttWG69pPnBr
 9rv2zu38tT/HBznQnPlTQu5f9hjDuNAMsjE2HnYKLwa4MVu3BcqapnMWPhhmJP9K
 4H0BaGlJHNUHt6ZrkPxDRNY2k2PhPUs/lwkMLUD1UWB4woS+TTaWrqgF4EWGX24r
 /r5Ppf75ABJp0CRX7h2lnoYtRifwyR8E+K2VnNXy1LvOCbBdNpZSrT4RBCNzuOPy
 PHwSzwU11eR/xA010vvfJVvCEBIl33DmXj8EaEVkomPxafGT3q6wTcKGEeohafQ+
 ZJzO2zIdrEQenWjgfP/YP/5E2V8SJwW07JWMD/n23sBrtL8BgryWqra6a0E8BPaK
 kGY7kNhRRO6KVyvWs887
 =zgda
 -----END PGP SIGNATURE-----

Merge tag 'samsung-drivers-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Samsung drivers/soc update for v4.8, part 2:
1. Endian-friendly fixes.
2. Make SROMC driver explicitly non-module.

* tag 'samsung-drivers-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  cpufreq: s5pv210: use relaxed IO accesors
  memory: samsung: exynos-srom: make it explicitly non-modular
  memory: samsung: endian fixes for IO

Signed-off-by: Olof Johansson <olof@lixom.net>
 2016-07-05 22:43:41 -07:00
Olof Johansson
9419491eda OMAP-GPMC: driver updates for v4.8 
* Make GPMC driver non modular as it is going to
 be built-in only till arch/arm/mach-omap2 users
 are removed.
 
 * Fix build if CONFIG_OF is not defined.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXcOJDAAoJENJaa9O+djCTMDYP/jurhmkQ+5AtQDkBiizbKiHD
 I11YApN9hRvfZFf3rh8+dwSNswQI/ND3foCdvN6D+TPTYPlEV06hjCygxPlqN+ui
 3cpBn0mG6ZKFuVkz5HIQwYdy9t+zn5HULT+JkPCkRRwFUBQys/Cm/UlkBQZQzgJC
 H4f+Rk81NoKY4LMeKAXweYoYA1y4LosgBX74THAd8zRSIGeVSuXGFFFCr49W+LTd
 /L4LxJxLy1UIj/8oMRMhYerCZuDIA4AftgW93pnLiqJ9Whoo9tASfw88VJw6wsle
 2JA5ZdNKw6I3/FAzsXGmWqcfviZaBdIHulrIiPhWz2sAonsUToz4tBIyNGDLHMra
 Z7bXf0iNIoxWXC4ClSoKfADm/Ooijti4f1+d4FbI1urhSC3RWzz/YH2KLccDetwR
 YJs3jrzVH409asTtk7qmFl/rA2dgvjhW68Cp0EDPvBpJlEtQlss4kzll3+7/z/VZ
 urRweA6SjaNgmpuJVbxjOE1DNzmPqglm1s6laAGQdCEC/CVwyjbF7ReUNLCRzYzD
 sgx6sEDNCfckwmYw+u3QUV4oiHwTMLSvfeNh6Lnoj1HTUg9KEVUT12ji17b8zEA7
 OaanLm9mHJWxt59l96xJO7LXAjF0BVatEYdxcY7ul9a87SgXdpKSM2XcRMRxImb4
 21M0qhhtHui2ukg5DBcY
 =8acM
 -----END PGP SIGNATURE-----

Merge tag 'gpmc-omap-for-v4.8' of https://github.com/rogerq/linux into next/drivers

OMAP-GPMC: driver updates for v4.8

* Make GPMC driver non modular as it is going to
be built-in only till arch/arm/mach-omap2 users
are removed.

* Fix build if CONFIG_OF is not defined.

* tag 'gpmc-omap-for-v4.8' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Move gpio functions out of #ifdef CONFIG_OF
  memory: omap-gpmc: make it explicitly non-modular

Signed-off-by: Olof Johansson <olof@lixom.net>
 2016-07-04 22:20:25 -07:00
Kefeng Wang
9f2c519c9f memory: omap-gpmc: use of_platform_default_populate() to populate default bus 
Use helper of_platform_default_populate() in linux/of_platform
when possible, instead of calling of_platform_populate() with
the default match table.

Acked-by: Roger Quadros <rogerq@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
 2016-06-23 15:00:55 -05:00
Paul Gortmaker
8a86a093ca memory: atmel-ebi: make it explicitly non-modular 
The Kconfig currently controlling compilation of this code is:

drivers/memory/Kconfig:config ATMEL_EBI
drivers/memory/Kconfig: bool "Atmel EBI driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the few remaining modular references, so that when reading
the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2016-06-21 17:17:45 +02:00
Paul Gortmaker
563b41c983 memory: atmel-sdramc: make it explicitly non-modular 
The Kconfig for this option is currently:

config ATMEL_SDRAMC
        bool "Atmel (Multi-port DDR-)SDRAM Controller"

...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity, so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.  An
alternate init level might be worth considering at a later date.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2016-06-21 17:16:42 +02:00
Honghui Zhang
3c8f4ad85c memory/mediatek: add support for mt2701 
Mediatek SMI has two generations of HW architecture, mt8173 uses the
second generation of SMI HW while mt2701 uses the first generation
HW of SMI.

There's slight differences between the two generations, for generation 2,
the register which control the iommu port access PA or IOVA is at each
larb's register base. But for generation 1, the register is at smi ao
base(smi always on register base).
Besides that, the smi async clock should be prepared and enabled for SMI
generation 1 HW to transform the smi clock into emi clock domain, but is
not needed for SMI generation 2.

This patch add SMI driver for mt2701 which use generation 1 SMI HW.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2016-06-21 11:36:19 +02:00
Paul Gortmaker
58f388bcf0 memory: samsung: exynos-srom: make it explicitly non-modular 
The Kconfig currently controlling compilation of this code is:

memory/samsung/Kconfig:config EXYNOS_SROM
memory/samsung/Kconfig: bool "Exynos SROM controller driver" if COMPILE_TEST

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
 2016-06-20 09:48:59 +02:00
Ben Dooks
cbf73175eb memory: samsung: endian fixes for IO 
Use the relaxed versions of the IO accessors to avoid any issues
if running in big endian.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
 2016-06-20 09:43:34 +02:00
Roger Quadros
32dd625a9f memory: omap-gpmc: Move gpio functions out of #ifdef CONFIG_OF 
The gpio related functions were mistakenly built only if CONFIG_OF
is defined. They are needed even otherwise and will cause build
failures if CONFIG_OF is not defined. Move the gpio functions
outside #ifdef CONFIG_OF.

Fixes: d2d00862df ("memory: omap-gpmc: Support general purpose input for WAITPINs")

Signed-off-by: Roger Quadros <rogerq@ti.com>
 2016-06-17 10:26:48 +03:00
Paul Gortmaker
caf21c61a1 memory: omap-gpmc: make it explicitly non-modular 
The Kconfig currently controlling compilation of this code is:

drivers/memory/Kconfig:config OMAP_GPMC
drivers/memory/Kconfig:  bool

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We don't replace module.h with init.h since the file already has that.

Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
 2016-06-17 10:11:54 +03:00
Ocquidant, Sebastien
8f50b8e574 memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing 
In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY
is overwritten by the WEEXTRADELAY value from the device tree and
GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device
tree.

As a consequence, the memory accesses cannot be configured properly when
the extra delay are needed for OE and WE.

Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the
device tree file and prevents GPMC_CONFIG4_OEXTRADELAY
being overwritten by the WEXTRADELAY value from the device tree.

Cc: stable@vger.kernel.org
Signed-off-by: Ocquidant, Sebastien <sebastienocquidant@eaton.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2016-06-16 11:43:48 +03:00
Amitoj Kaur Chawla
55bb1d8355 memory: tegra: mc: Add missing of_node_put() 
for_each_child_of_node() performs an of_node_get() on each iteration, so
to break out of the loop an of_node_put() is required.

Found using Coccinelle. The semantic patch used for this is as follows:

// <smpl>
@@
expression e;
local idexpression n;
@@

 for_each_child_of_node(..., n) {
   ... when != of_node_put(n)
       when != e = n
(
   return n;
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2016-06-14 11:39:39 +02:00
Julia Lawall
d1122e4b76 memory: tegra: Delete unneeded of_node_put() 
for_each_child_of_node() performs an of_node_put() on each iteration, so
putting an of_node_put() before a continue results in a double put.

The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_get(child)
*  of_node_put(child);
   ...
*  continue;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2016-06-14 11:39:39 +02:00
Amitoj Kaur Chawla
aafb197f75 memory: tegra: tegra124-emc: Add missing of_node_put() 
for_each_child_of_node() performs an of_node_get() on each iteration, so
to break out of the loop an of_node_put() is required.

Found using Coccinelle. The semantic patch used for this is as follows:

// <smpl>
@@
expression e;
local idexpression n;
@@

 for_each_child_of_node(..., n) {
   ... when != of_node_put(n)
       when != e = n
(
   return n;
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2016-06-14 11:39:38 +02:00
Boris Brezillon
6a4ec4cd08 memory: add Atmel EBI (External Bus Interface) driver 
The EBI (External Bus Interface) is used to access external peripherals
(NOR, SRAM, NAND, and other specific devices like ethernet controllers).
Each device is assigned a CS line and an address range and can have its
own configuration (timings, access mode, bus width, ...).
This driver provides a generic DT binding to configure a device according
to its requirements.
For specific device controllers (like the NAND one) the SMC timings
should be configured by the controller driver through the matrix and
smc syscon regmaps.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
 2016-06-02 08:32:25 +02:00
Linus Torvalds
8bc4d5f394 MTD updates for v4.7: 
First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him.
 
 Generic:
 
  * Migrated NAND LED trigger to be a generic MTD trigger
 
 NAND:
 
  * Introduction of the "ECC algorithm" concept, to avoid overloading the ECC
    mode field too much more
  * Replaced the nand_ecclayout infrastructure with something a little more
    flexible (finally!) and future proof
  * Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of
    this into their own tree as well
  * Prepare the sunxi NAND driver to receive DMA support
  * Handle bitflips in erased pages on GPMI revisions that do not support
    this in hardware.
 
 SPI NOR:
 
  * Start using the spi_flash_read() API for SPI drivers that support it (i.e.,
    SPI drivers with special memory-mapped flash modes)
 
 And other small scattered improvments.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXQ9oUAAoJEFySrpd9RFgttf0P/3oIVCvLHSFIsi7XiUusWJWk
 Cb+xW3ujFd2kNUqAQGnyvPUGU1amgjAjy2kwMpvpOG07DVgSnxQVGaQLins8Zwpw
 auWxH8llISmC6UkNsS1jV0d7KzSMCT2Ne+BenRAn68kq3ovXPPB3B19B6dFj8ail
 s83ajoZhsn1+eyctiKtbhXgZWkJHlRmBeXPKAJcS0lBcSibR+6N+O//JEAMnyYvc
 7azuw0KMVwQNnNYFAfd9dilV5juZ9bZptTJYH7XuF+44FhxmSKvTX2a9gmp0C4Bm
 FszUiPrIWF+t98nSQxxSn/zPlyllFyoisa6F7eGnDHIz+bH0Emf2oVwsSG5ASl42
 XTml0kB0jCfuBfgAiyhYU2Uds7rSYs/ZcHr3iPgpUY3Sc3dgoArDdahMJXwqaoa8
 UdChu6A+rjhi9PqhzNNVTarbilp3pOVgKAUVEWTdpQ1wGU4c+9SNlTTwhPy4g7RB
 uKlqbMeiZ/5rPiihaMUNtzxMxSe9OGYW2HVNVExvmlF2Ca42M1xJJBMlAA6IIXyS
 35d3Y4F5zPP7U6GCVla06WHkL5ahXJWmI0Xhf+2jCnDMipeAl6eCEiAJY5EmvAnr
 FTpZ4qkspED69mO8oZW9ORje0n6PCm4XPOi4Vl8kci8tlBsEJMk9jaedWwGlZkRk
 I5leUP4NEougvuHce2Cn
 =J6KN
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...
 2016-05-24 11:00:20 -07:00
Linus Torvalds
1d6da87a32 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 
Pull drm updates from Dave Airlie:
 "Here's the main drm pull request for 4.7, it's been a busy one, and
  I've been a bit more distracted in real life this merge window.  Lots
  more ARM drivers, not sure if it'll ever end.  I think I've at least
  one more coming the next merge window.

  But changes are all over the place, support for AMD Polaris GPUs is in
  here, some missing GM108 support for nouveau (found in some Lenovos),
  a bunch of MST and skylake fixes.

  I've also noticed a few fixes from Arnd in my inbox, that I'll try and
  get in asap, but I didn't think they should hold this up.

  New drivers:
   - Hisilicon kirin display driver
   - Mediatek MT8173 display driver
   - ARC PGU - bitstreamer on Synopsys ARC SDP boards
   - Allwinner A13 initial RGB output driver
   - Analogix driver for DisplayPort IP found in exynos and rockchip

  DRM Core:
   - UAPI headers fixes and C++ safety
   - DRM connector reference counting
   - DisplayID mode parsing for Dell 5K monitors
   - Removal of struct_mutex from drivers
   - Connector registration cleanups
   - MST robustness fixes
   - MAINTAINERS updates
   - Lockless GEM object freeing
   - Generic fbdev deferred IO support

  panel:
   - Support for a bunch of new panels

  i915:
   - VBT refactoring
   - PLL computation cleanups
   - DSI support for BXT
   - Color manager support
   - More atomic patches
   - GEM improvements
   - GuC fw loading fixes
   - DP detection fixes
   - SKL GPU hang fixes
   - Lots of BXT fixes

  radeon/amdgpu:
   - Initial Polaris support
   - GPUVM/Scheduler/Clock/Power improvements
   - ASYNC pageflip support
   - New mesa feature support

  nouveau:
   - GM108 support
   - Power sensor support improvements
   - GR init + ucode fixes.
   - Use GPU provided topology information

  vmwgfx:
   - Add host messaging support

  gma500:
   - Some cleanups and fixes

  atmel:
   - Bridge support
   - Async atomic commit support

  fsl-dcu:
   - Timing controller for LCD support
   - Pixel clock polarity support

  rcar-du:
   - Misc fixes

  exynos:
   - Pipeline clock support
   - Exynoss4533 SoC support
   - HW trigger mode support
   - export HDMI_PHY clock
   - DECON5433 fixes
   - Use generic prime functions
   - use DMA mapping APIs

  rockchip:
   - Lots of little fixes

  vc4:
   - Render node support
   - Gamma ramp support
   - DPI output support

  msm:
   - Mostly cleanups and fixes
   - Conversion to generic struct fence

  etnaviv:
   - Fix for prime buffer handling
   - Allow hangcheck to be coalesced with other wakeups

  tegra:
   - Gamme table size fix"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
  drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
  drm/edid: move displayid validation to it's own function.
  drm/displayid: Iterate over all DisplayID blocks
  drm/edid: move displayid tiled block parsing into separate function.
  drm: Nuke ->vblank_disable_allowed
  drm/vmwgfx: Report vmwgfx version to vmware.log
  drm/vmwgfx: Add VMWare host messaging capability
  drm/vmwgfx: Kill some lockdep warnings
  drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
  drm/nouveau/core: recognise GM108 chipsets
  drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
  drm/nouveau/gr/gk104-: share implementation of ppc exception init
  drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
  drm/nouveau/bios/pll: check BIT table version before trying to parse it
  drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
  drm/nouveau/volt/gk104: round up in gk104_volt_set
  drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gf100-: allocate mmu debug buffers
  drm/nouveau/fb: allow chipset-specific actions for oneinit()
  ...
 2016-05-23 11:48:48 -07:00
Linus Torvalds
5af2344013 Char / Misc driver update for 4.7-rc1 
Here's the big char and misc driver update for 4.7-rc1.
 
 Lots of different tiny driver subsystems have updates here with new
 drivers and functionality.  Details in the shortlog.
 
 All have been in linux-next with no reported issues for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0YYACgkQMUfUDdst+ynmtACeLpLLKZsy1v7WfkW92cLSOPBD
 2C8AoLFPKoh55rlOJrNz3bW9ANAaOloX
 =/nsL
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here's the big char and misc driver update for 4.7-rc1.

  Lots of different tiny driver subsystems have updates here with new
  drivers and functionality.  Details in the shortlog.

  All have been in linux-next with no reported issues for a while"

* tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits)
  mcb: Delete num_cells variable which is not required
  mcb: Fixed bar number assignment for the gdd
  mcb: Replace ioremap and request_region with the devm version
  mcb: Implement bus->dev.release callback
  mcb: export bus information via sysfs
  mcb: Correctly initialize the bus's device
  mei: bus: call mei_cl_read_start under device lock
  coresight: etb10: adjust read pointer only when needed
  coresight: configuring ETF in FIFO mode when acting as link
  coresight: tmc: implementing TMC-ETF AUX space API
  coresight: moving struct cs_buffers to header file
  coresight: tmc: keep track of memory width
  coresight: tmc: make sysFS and Perf mode mutually exclusive
  coresight: tmc: dump system memory content only when needed
  coresight: tmc: adding mode of operation for link/sinks
  coresight: tmc: getting rid of multiple read access
  coresight: tmc: allocating memory when needed
  coresight: tmc: making prepare/unprepare functions generic
  coresight: tmc: splitting driver in ETB/ETF and ETR components
  coresight: tmc: cleaning up header file
  ...
 2016-05-20 21:20:31 -07:00
Philipp Zabel
cb1b5dff49 memory: mtk-smi: export mtk_smi_larb_get/put 
To allow building mediatek-drm.ko as a module, the
mtk_smi_larb_get and mtk_smi_larb_put symbols have
to be exported.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
 2016-05-06 14:20:56 +02:00
Dan Carpenter
ae53e37400 memory: of_memory: Silence uninitialized variable warning 
Presumably we never use the default: case statement which prints a
warning message.  But my static checker complains that if we do, we will
hit an uninitialized variable warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2016-05-01 14:20:04 -07:00
Boris Brezillon
f679888f29 mtd: nand: omap2: rely on generic DT parsing done in nand_scan_ident() 
The core now takes care of parsing generic DT properties in
nand_scan_ident() when nand_set_flash_node() has been called.
Rely on this initialization instead of calling of_get_nand_xxx()
manually.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Franklin S Cooper Jr. <fcooper@ti.com>
 2016-04-19 22:04:54 +02:00
Raghav Dogra
7a65417216 mtd/ifc: Add support for IFC controller version 2.0 
The new IFC controller version 2.0 has a different memory map page.
Upto IFC 1.4 PAGE size is 4 KB and from IFC2.0 PAGE size is 64KB.
This patch segregates the IFC global and runtime registers to appropriate
PAGE sizes.

Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Raghav Dogra <raghav@freescale.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
 2016-04-19 22:04:53 +02:00
Pavel Fedin
8ac2266d88 memory: samsung: exynos-srom: Add support for bank configuration 
Implement handling properties in subnodes and adding child devices to the
system. Child devices will not be added if configuration fails.

Since the driver now does more than suspend-resume support, dependency on
CONFIG_PM is removed.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
 2016-04-18 14:25:29 +02:00
Pankaj Dubey
a8aabb91dc memory: Add support for Exynos SROM driver 
This patch adds Exynos SROM controller driver which will handle
save restore of SROM registers during S2R.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[p.fedin@samsung.com: tested on SMDK5410]
Tested-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
[k.kozlowski: Minor COMPILE_TEST adjustments in Kconfig entries]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
 2016-04-18 14:25:27 +02:00
Roger Quadros
9e6946215d memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs 
GPMC_STATUS register is private to the GPMC module and must not be
accessed directly by NAND driver through the gpmc_regs.

They must use gpmc_omap_get_nand_ops() instead.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:55:28 +03:00
Roger Quadros
b2bac25a4d memory: omap-gpmc: Support WAIT pin edge interrupts 
OMAPs can have 2 to 4 WAITPINs that can be used as edge triggered
interrupts if not used for memory wait state insertion.

Support these interrupts via the gpmc IRQ domain.

The gpmc IRQ domain interrupt map is:

0 - NAND_fifoevent
1 - NAND_termcount
2 - GPMC_WAIT0 edge
3 - GPMC_WAIT1 edge, and so on

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:55:06 +03:00
Roger Quadros
210325f0f4 memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring 
If the device attached to GPMC wants to use the WAIT pin
for WAIT monitoring then we reserve it internally for
exclusive use.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:55:00 +03:00
Roger Quadros
d2d00862df memory: omap-gpmc: Support general purpose input for WAITPINs 
OMAPs can have 2 to 4 WAITPINs that can be used as general purpose
input if not used for memory wait state insertion.

The first user will be the OMAP NAND chip to get the NAND
read/busy status using gpiolib.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:54:12 +03:00
Roger Quadros
bdd7e033fe memory: omap-gpmc: Prevent mapping into 1st 16MB 
We have been preventing mapping GPMC children in the
first 1MB but really it has to be the first 16MB as
the minimum GPMC partition size is 16MB.

Also print an error message if CS mapping fails
due to DT requesting address outside the GPMC
map.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:53:54 +03:00
Roger Quadros
c9711ec525 mtd: nand: omap: Clean up device tree support 
Move NAND specific device tree parsing to NAND driver.

The NAND controller node must have a compatible id, register space
resource and interrupt resource.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:53:36 +03:00
Roger Quadros
384258f252 memory: omap-gpmc: Implement IRQ domain for NAND IRQs 
GPMC provides 2 interrupts for NAND use. i.e. fifoevent and termcount.
Use IRQ domain for this. NAND device tree node can then
get the necessary interrupts by using gpmc as the interrupt parent.

Legacy boot uses gpmc_get_client_irq to get the
NAND interrupts from the GPMC IRQ domain.
Get rid of custom bitmasks and use IRQ domain for that
as well.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:52:28 +03:00
Roger Quadros
512d73d1c6 memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status 
This is needed by OMAP NAND driver to poll the empty status
of the writebuffer.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:51:57 +03:00
Roger Quadros
f47fcad63f memory: omap-gpmc: Introduce GPMC to NAND interface 
The OMAP GPMC module has certain registers dedicated for NAND
access and some NAND bits mixed with other GPMC functionality.

For the NAND dedicated registers we have the struct gpmc_nand_regs.

The NAND driver needs to access NAND specific bits from the
following non-dedicated registers
- EMPTYWRITEBUFFERSTATUS from GPMC_STATUS

For accessing these bits we introduce the struct gpmc_nand_ops.

Add gpmc_omap_get_nand_ops() that returns the gpmc_nand_ops along
with updating the gpmc_nand_regs. This API will be called by the
OMAP NAND driver to access the necessary bits in GPMC register space.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
 2016-04-15 11:51:34 +03:00
Linus Torvalds
8f40842e42 MTD updates for v4.6 
NAND:
  * Add sunxi_nand randomizer support
  * begin refactoring NAND ecclayout structs
  * fix pxa3xx_nand dmaengine usage
  * brcmnand: fix support for v7.1 controller
  * add Qualcomm NAND controller driver
 
 SPI NOR:
  * add new ls1021a, ls2080a support to Freescale QuadSPI
  * add new flash ID entries
  * support bottom-block protection for Winbond flash
  * support Status Register Write Protect
  * remove broken QPI support for Micron SPI flash
 
 JFFS2:
  * improve post-mount CRC scan efficiency
 
 General:
  * refactor bcm63xxpart parser, to later extend for NAND
  * add writebuf size parameter to mtdram
 
 Other minor code quality improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW9CzVAAoJEFySrpd9RFgtQFwQAJdH0wnsZTYfeqToIaD8yMM4
 rtakV/oIMSvMSWuqK+Mx0k6OjGwswgnGZ+tfQLRAYIhb33P8UD0F8Dv5D0x/+zRo
 EgiDlnss/lliXpbh2u4fsANSpFF/JUPXFqU6NanjqQ1rtvR60LUeKOFEz1NRciuV
 Ib6oDLFeXQFxwG0J+EBDo5MrT8aiPODtx4TS8VVo0o0y/WLkEujQPP5592TnCPha
 zX0n9azi26pARo7VLqWjVD8GigY5PadqJAWOZcQr0dGMQv5URtWcCCdThiNsCEzY
 SW9cYSr4CBdy1FIeoJ47yoBg8aFzhyeeuF1efb1U0MoYVL0rdIbznop3Kwilj48L
 Rnh4hvKkrTH16rO6RfKm1lIJaJQYKMErXyEceYMIjV91fEL3qhfbU9W6+Q5HT4hY
 oJmlH+4e/I1Jtf+vW4xFGMYclmYwCO6GJ4HHqnNpby/iH/nZ07hNX3lbxrlqHMwh
 MrSIidqLTsseXcyHBFc+42AsWs8unaYWVB0N3VFkEgl0BFyPObAtvwnHA6zywMvp
 EqJijXFG8VPcztE3eTIMbd0WOkxTjpMT6YHzpZqli/ENxCgu79OWELYrJ0/vC5Uj
 HK0qxgvIzUyJgmikkySDvd/Hc6HWItYonlcAht0VErNfTTfkMwWgRz1W4ZRB6bOJ
 7M83aytLyRYaPGEbwaoR
 =xOlP
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:
   - Add sunxi_nand randomizer support
   - begin refactoring NAND ecclayout structs
   - fix pxa3xx_nand dmaengine usage
   - brcmnand: fix support for v7.1 controller
   - add Qualcomm NAND controller driver

  SPI NOR:
   - add new ls1021a, ls2080a support to Freescale QuadSPI
   - add new flash ID entries
   - support bottom-block protection for Winbond flash
   - support Status Register Write Protect
   - remove broken QPI support for Micron SPI flash

  JFFS2:
   - improve post-mount CRC scan efficiency

  General:
   - refactor bcm63xxpart parser, to later extend for NAND
   - add writebuf size parameter to mtdram

  Other minor code quality improvements"

* tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits)
  mtd: nand: remove kerneldoc for removed function parameter
  mtd: nand: Qualcomm NAND controller driver
  dt/bindings: qcom_nandc: Add DT bindings
  mtd: nand: don't select chip in nand_chip's block_bad op
  mtd: spi-nor: support lock/unlock for a few Winbond chips
  mtd: spi-nor: add TB (Top/Bottom) protect support
  mtd: spi-nor: add SPI_NOR_HAS_LOCK flag
  mtd: spi-nor: use BIT() for flash_info flags
  mtd: spi-nor: disallow further writes to SR if WP# is low
  mtd: spi-nor: make lock/unlock bounds checks more obvious and robust
  mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region
  mtd: spi-nor: wait for SR_WIP to clear on initial unlock
  mtd: nand: simplify nand_bch_init() usage
  mtd: mtdswap: remove useless if (!mtd->ecclayout) test
  mtd: create an mtd_oobavail() helper and make use of it
  mtd: kill the ecclayout->oobavail field
  mtd: nand: check status before reporting timeout
  mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'
  mtd: mtdram: Add parameter for setting writebuf size
  mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd'
  ...
 2016-03-24 19:57:15 -07:00
Linus Torvalds
b4af7f773e IOMMU Updates for Linux v4.6 
This time with:
 
 	* Updates for the Exynos IOMMU driver to make use of default
 	  domains and to add support for the SYSMMU v5
 
 	* New Mediatek IOMMU driver
 
 	* Support for the ARMv7 short descriptor format in the
 	  io-pgtable code
 
 	* Default domain support for the ARM SMMU
 
 	* Couple of other small fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJW7/7rAAoJECvwRC2XARrjKvgP/2sgR6lzIGksKpZRNNNoyJEp
 PbFt3zxBvIPYow6rQtfMqU82FAi6psq+EVKq+M0EOeJrjFGawwWpN9H/e0ZCs5Z/
 /s6DIljRFKrbty59eFsHn57Pd+302Pt0GkwnSgdgBJD7FimozyyeMJnAOs5gPjYT
 jF2ajV9FYa5rIRrMsSD2KjLKgBb3xVsgUlW72NU2WwldnOB6fSsfg4ll01kbzTon
 IQENT5ywk9zZFouLyrX6EvcvowHslO/sZhGe3Py9qOOHpu9roW7EE7rEGYdabn47
 PGpw8O5NOeSrQNzlmhXje5tuKxkh33DV55s7vVcaOy66kWbYExJGoz1/V7Vju4n1
 pok82L3N8eauMs3xqNOiQMV8UsWIXOzdMMaGypM18pCVKMaAUiz9vO9rLSmR4Z20
 IYFiX0yBXhc1AXMnrRlq/xR2WjBX2L2s0VguvYoSssdmJUZ9aKYxsurF8Ylqpm+1
 wymOj+gjM056DqAXcYBVg4ZPOEezRjnUe2qD8lZ4et3xOVUL3LXRi8FmacztEB97
 chUSB5mur/XRy6bOVI2l1uRQaqdfErgbCey0fa9N/SWKSHKWtAfR6CYYVpoR6m0L
 H/xL7yCn6jUEoadKxZyTKnX8GIN6wNcZdI+58OOMz3sjlmWs69wgdPt8Xx2RNHpm
 7caf/9sTdpUeh+V2fySD
 =uiAk
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - updates for the Exynos IOMMU driver to make use of default domains
   and to add support for the SYSMMU v5

 - new Mediatek IOMMU driver

 - support for the ARMv7 short descriptor format in the io-pgtable code

 - default domain support for the ARM SMMU

 - couple of other small fixes all over the place

* tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
  iommu/ipmmu-vmsa: Add r8a7795 DT binding
  iommu/mediatek: Check for NULL instead of IS_ERR()
  iommu/io-pgtable-armv7s: Fix kmem_cache_alloc() flags
  iommu/mediatek: Fix handling of of_count_phandle_with_args result
  iommu/dma: Fix NEED_SG_DMA_LENGTH dependency
  iommu/mediatek: Mark PM functions as __maybe_unused
  iommu/mediatek: Select ARM_DMA_USE_IOMMU
  iommu/exynos: Use proper readl/writel register interface
  iommu/exynos: Pointers are nto physical addresses
  dts: mt8173: Add iommu/smi nodes for mt8173
  iommu/mediatek: Add mt8173 IOMMU driver
  memory: mediatek: Add SMI driver
  dt-bindings: mediatek: Add smi dts binding
  dt-bindings: iommu: Add binding for mediatek IOMMU
  iommu/ipmmu-vmsa: Use ARCH_RENESAS
  iommu/exynos: Support multiple attach_device calls
  iommu/exynos: Add Maintainers entry for Exynos SYSMMU driver
  iommu/exynos: Add support for v5 SYSMMU
  iommu/exynos: Update device tree documentation
  iommu/exynos: Add support for SYSMMU controller with bogus version reg
  ...
 2016-03-22 11:57:43 -07:00
Yong Wu
cc8bbe1a83 memory: mediatek: Add SMI driver 
This patch add SMI(Smart Multimedia Interface) driver. This driver
is responsible to enable/disable iommu and control the power domain
and clocks of each local arbiter.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2016-02-25 16:49:08 +01:00
Neil Armstrong
2c92c04b6f memory: omap-gpmc: Add support for AAD timings 
In order to support extended timings parameters on hardware supporting the
"AAD" mode like the AM335x or DM816x, add these entries into the GPMC driver
if the hardware is capable.

Tested on DM816x and AM335x.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
 2016-02-08 16:22:03 +02:00
Raghav Dogra
ed4eeba733 driver/memory: Removal of deprecated NO_IRQ 
Replacing the NO_IRQ macro with 0. If there is no interrupt,
returned value will be 0 regardless of what NO_IRQ is defined.

Signed-off-by: Raghav Dogra <raghav@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
 2016-02-01 10:45:05 -08:00
Linus Torvalds
9638685e32 ARM: SoC driver updates for v4.5 
Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc,
 but also some other driver updates that don't belong anywhere else. We also
 bring in the drivers/reset code through arm-soc.
 
 Some of the larger updates:
 
 - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other
   parts of the chip/board on these platforms, all proprietary protocols that
   don't fit into other subsystems and live in drivers/soc for now.
 
 - System bus driver for UniPhier
 - Driver for the TI Wakeup M3 IPC device
 
 - Power management for Raspberry PI
 
 + Again a bunch of other smaller updates and patches.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWnsLfAAoJEIwa5zzehBx3KVcQAJS90XyeheS3LX+SUMsn5qAJ
 Q+NLzfYAAHZPafruOTcBATs9xUvuJM4KsdqXIWiA4gJig/ZFpF5dpDbrnhpdJFEK
 0ULSfZd9J4B4m7aBo6L8lVBEbd4i++updHpIYnmPx3tkLL0Win/VM8KlMpdOzMQN
 DncNFVIRJ80OxepdHgBu6yY7gv3Z8XhRrNukeG8EZTvHw5bJQHfjMOeAQNQWUmWa
 HLyO6uqYkca38XMJOhPhqt0mOpwh/X6ByUueIrIMpOksJcRnklrkjDnBuvp9dQ+8
 fU1sOjjYzQPiA6Oa3o/2ruBKj2FymLJ0OzONJb3xPiBO5bJbc1LJwK00tuIRC3hv
 r9Jqoqwae/AolqYephfao/LvUcoyHBaZ6aSbGQYms0Wy2FCkkkocfY2i7QP6S6Mz
 qtOCHxX+yF921AEZ1xTOKgBvBU931WM1MQOe4s1QVllRlLFJhrGqDDwsNlPwRa+6
 OkXmPJSEhsHGFaCdA3iOEy+/W2dvMbVOaGa9csNDpPcSJhhpxc5A4CYRlFSwGyM1
 oL20g1T3ybDP+EkNcdpavWdQ55toWGmm48PunIZImVSdgNRZZQJw107yA/UzQTNz
 kOg27kqtjpM4xcpxmwGlIj4Zoy1M390ACm+n79Awa9agvjOvfV4QE1tLB4tiXyuy
 0Pxy8WWL/G5Si8bKWsfc
 =khZ5
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.  Some for SoC-family code under
  drivers/soc, but also some other driver updates that don't belong
  anywhere else.  We also bring in the drivers/reset code through
  arm-soc.

  Some of the larger updates:

   - Qualcomm support for SMEM, SMSM, SMP2P.  All used to communicate
     with other parts of the chip/board on these platforms, all
     proprietary protocols that don't fit into other subsystems and live
     in drivers/soc for now.

   - System bus driver for UniPhier

   - Driver for the TI Wakeup M3 IPC device

   - Power management for Raspberry PI

  + Again a bunch of other smaller updates and patches"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: uniphier: allow only built-in driver
  ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency
  MAINTAINERS: Drop Kumar Gala from QCOM
  bus: uniphier-system-bus: add UniPhier System Bus driver
  ARM: bcm2835: add rpi power domain driver
  dt-bindings: add rpi power domain driver bindings
  ARM: bcm2835: Define two new packets from the latest firmware.
  drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
  soc: mediatek: SCPSYS: Add regulator support
  MAINTAINERS: Change QCOM entries
  soc: qcom: smd-rpm: Add existing platform support
  memory/tegra: Add number of TLB lines for Tegra124
  reset: hi6220: fix modular build
  soc: qcom: Introduce WCNSS_CTRL SMD client
  ARM: qcom: select ARM_CPU_SUSPEND for power management
  MAINTAINERS: Add rules for Qualcomm dts files
  soc: qcom: enable smsm/smp2p modular build
  serial: msm_serial: Make config tristate
  soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
  soc: qcom: smsm: Add driver for Qualcomm SMSM
  ...
 2016-01-20 18:42:30 -08:00
Lijun Pan
c4aa1937b7 fsl-ifc: add missing include on ARM64 
Need to include sched.h to fix the following compilation error
if FSL_IFC is enabled on ARM64 machine.

In file included from include/linux/mmzone.h:9:0,
                 from include/linux/gfp.h:5,
                 from include/linux/kmod.h:22,
                 from include/linux/module.h:13,
                 from drivers/memory/fsl_ifc.c:22:
drivers/memory/fsl_ifc.c: In function ‘check_nand_stat’:
include/linux/wait.h:165:35: error: ‘TASK_NORMAL’ undeclared (first use in this function)
 #define wake_up(x)   __wake_up(x, TASK_NORMAL, 1, NULL)
                                   ^
drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’
   wake_up(&ctrl->nand_wait);
   ^
include/linux/wait.h:165:35: note: each undeclared identifier is reported only once for each function it appears in
 #define wake_up(x)   __wake_up(x, TASK_NORMAL, 1, NULL)
                                   ^
drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’
   wake_up(&ctrl->nand_wait);
   ^

Analysis is as follows:
I put some instrumental code and get the
following .h files inclusion sequence:

In file included from ./arch/arm64/include/asm/compat.h:25:0,
                 from ./arch/arm64/include/asm/stat.h:23,
                 from include/linux/stat.h:5,
                 from include/linux/module.h:10,
                 from drivers/memory/fsl_ifc.c:23:
include/linux/sched.h:113:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘struct’
 struct sched_attr {
 ^

CONFIG_COMPAT=y is enabled while 39 and 48 bit VA is selected.
When 42 bit VA is selected, it does not enable CONFIG_COMPAT=y

In ./arch/arm64/include/asm/stat.h:23, it has
"#ifdef CONFIG_COMPAT"
"#include <asm/compat.h>"
"..."
"#endif"

Since ./arch/arm64/include/asm/stat.h does not
include ./arch/arm64/include/asm/compat.h,
then it will not include include/linux/sched.h
Hence we have to manually add "#include <linux/sched.h>"
in drivers/memory/fsl_ifc.c

Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2015-12-16 00:16:58 +01:00
Vince Hsu
e2127ae7a5 memory/tegra: Add number of TLB lines for Tegra124 
Tegra124 was accidentally left out when the number of TLB lines was
parameterized in commit 11cec15bf3 ("iommu/tegra-smmu: Parameterize
number of TLB lines"). Fortunately this doesn't cause any noticeable
regressions upstream, presumably because there aren't any use-cases
that exercise enough pressure on the SMMU. But it is a regression
nonetheless, so let's fix it.

Fixes: 11cec15bf3 ("iommu/tegra-smmu: Parameterize number of TLB lines")
Signed-off-by: Vince Hsu <vince.h@nvidia.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
[treding@nvidia.com: extract from unrelated patch]
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-12-14 16:11:35 +01:00
Linus Torvalds
b44a3d2a85 ARM: SoC driver updates for v4.4 
As we've enabled multiplatform kernels on ARM, and greatly done away with
 the contents under arch/arm/mach-*, there's still need for SoC-related
 drivers to go somewhere.
 
 Many of them go in through other driver trees, but we still have
 drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
 that might be shared between ARM and ARM64 (or just in general makes
 sense to not have under the architecture directory).
 
 This branch contains mostly such code:
 
 - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate
   with power management blocks on these SoCs for use by clock, regulator and
   bus frequency drivers.
 - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs.
 - Drivers for ARM's SCPI (System Control Processor). Not to be confused with
   PSCI (Power State Coordination Interface). SCPI is used to communicate with
   the assistant embedded cores doing power management, and we have yet to see
   how many of them will implement this for their hardware vs abstracting in
   other ways (or not at all like in the past).
 - To make confusion between SCPI and PSCI more likely, this release also
   includes an update of PSCI to interface version 1.0.
 - Rockchip support for power domains.
 - A driver to talk to the firmware on Raspberry Pi.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQC+cAAoJEIwa5zzehBx3jEUP/0GpxfDVanEUkudVLLe7J0RH
 CNlRan107Cw6hXRUJo7elEsuCALjccXjc1CAH4+RnNpOAeBKW97n+WU7trTv+wUZ
 sQX4SkBPKFBlgwGF2qhsi5q74gms/BrgtCa4kNb9joOYso039tlfIOPzK80DMkOm
 TkyIJdUCgFJMjCQLhX6kGT0PDcrbIjb6aA2cF3FAVeaJA7uz8lNe/eHJr3oHxIEY
 CvC651yJ2mIHQUU4BJx/AJo+wXg3dRUXNCAtBjwLRPEAzduYZXYm1ZTVIby/1q9r
 dR2KDFEuibODXmXrDBzKNJwCu/TLJEwo/1oPaEIVfY91XLKfiWUhgVqa1o1I+d9U
 XoGPibCW461qFahjQW87MfInALpCOA7/RbTNjFp+MVyipCYvkaYq7KFiYEldgFDx
 z4Qx/J4hYc2TlDWrpNiUCZMfmhwi7y+Ib+tnenYTO1eyMuw0e9mfnVdjk5iU3Pvk
 Ye4qPqpYclJruyHbYi164878+1lLaW2NCUgC3rkBO/GWPAzp7d9iLWoZ3PuyD5i5
 PEjs668UcRdZYbI4rdrhGHL8Eq9Gnuc4Rthu7HxPOK+DG0XgP8r97PhM8aYGYVDO
 +yikBtjWRsA9fPj3rMKA3UsQ61DAeR9LmZ0XPGjWFMCjCG0JlUoIMaA+Uu0i8fr8
 95qxBVxbO7rhL39r1rhV
 =dm+I
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...
 2015-11-10 15:00:03 -08:00
Linus Torvalds
8e483ed134 char/misc drivers for 4.4-rc1 
Here is the big char/misc driver update for 4.4-rc1.  Lots of different
 driver and subsystem updates, hwtracing being the largest with the
 addition of some new platforms that are now supported.  Full details in
 the shortlog.
 
 All of these have been in linux-next for a long time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlY6d/oACgkQMUfUDdst+yl93ACcCf91y+ufwU3cmcnq5LpwHPfx
 VbkAn08Cn6Wu6IcihoEpR4hqGgIOtjqW
 =1a3d
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.4-rc1.  Lots of
  different driver and subsystem updates, hwtracing being the largest
  with the addition of some new platforms that are now supported.  Full
  details in the shortlog.

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits)
  fpga: socfpga: Fix check of return value of devm_request_irq
  lkdtm: fix ACCESS_USERSPACE test
  mcb: Destroy IDA on module unload
  mcb: Do not return zero on error path in mcb_pci_probe()
  mei: bus: set the device name before running fixup
  mei: bus: use correct lock ordering
  mei: Fix debugfs filename in error output
  char: ipmi: ipmi_ssif: Replace timeval with timespec64
  fpga: zynq-fpga: Fix issue with drvdata being overwritten.
  fpga manager: remove unnecessary null pointer checks
  fpga manager: ensure lifetime with of_fpga_mgr_get
  fpga: zynq-fpga: Change fw format to handle bin instead of bit.
  fpga: zynq-fpga: Fix unbalanced clock handling
  misc: sram: partition base address belongs to __iomem space
  coresight: etm3x: adding documentation for sysFS's cpu interface
  vme: 8-bit status/id takes 256 values, not 255
  fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000
  ARM: zynq: dt: Updated devicetree for Zynq 7000 platform.
  ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager.
  ver_linux: proc/modules, limit text processing to 'sed'
  ...
 2015-11-04 22:15:15 -08:00
Uwe Kleine-König
fd820a1ec7 memory: omap-gpmc: dump "before" state before first modification 
When gpmc_cs_show_timings is called in gpmc_cs_set_timings()
gpmc_cs_program_settings() was already run which modifies the CONFIG1
register. So to be more useful do the "before" dump earlier.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2015-10-12 16:23:34 -07:00
Tony Lindgren
be59b6192f memory: omap-gpmc: Fix unselectable debug option for GPMC 
Commit 63aa945b10 ("memory: omap-gpmc: Add Kconfig option for debug")
added a debug option for GPMC, but somehow managed to keep it unselectable.

This probably happened because I had some uncommitted changes and the
GPMC option is selected in the platform specific Kconfig.

Let's also update the description a bit, it does not mention that
enabling the debug option also disables the reset of GPMC controller
during the init as pointed out by Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> and Roger Quadros <rogerq@ti.com>.

Fixes: 63aa945b10 ("memory: omap-gpmc: Add Kconfig option for debug")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2015-10-12 16:19:54 -07:00
Luis de Bethencourt
df6be79062 memory: ti-aemif: Fix module autoload for OF platform driver 
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2015-10-05 04:44:11 +01:00
Luis de Bethencourt
613a91e275 memory: fsl-corenet: Fix module autoload for OF platform driver 
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2015-10-05 04:44:11 +01:00
Vladimir Zapolskiy
f6d77beefd memory: pl172: add ARM PrimeCell PL176 MPMC support 
The change adds support of ARM PrimeCell PL176 MPMC.

Static memory configuration of PL175 MPMC is very similar to one found
on PL172 and PL175 controllers, so it is preferred to add its support
into the existing driver. The difference is that PL176 supports up to
10 slave ports (but only 4 of them may be connected to static memory
devices), AHB master bus width cab be 64-bit wide, also NAND devices
can be interfaced.

Similar to PL175 contoller, PL176 has no write buffer enable control
in static memory configuration register, the rest of static memory
configuration bits (with exception of NAND) is the same.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
 2015-09-29 22:19:02 +02:00
Vladimir Zapolskiy
b794df56cb memory: pl172: add ARM PrimeCell PL175 MPMC support 
The change adds support of ARM PrimeCell PL175 MPMC, the controller is
found on NXP LPC32xx SoC.

PL175 MPMC is very similar to PL172 controller, so it is preferred to
add its support into the existing driver.

One of the differences between PL172 and PL175 is that the latter one
supports up to 6 AHB ports, but still only 4 AHB ports can be assigned
to a static memory device, also PL175 does not have write buffer
enable control in static memory configuration register.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
 2015-09-29 22:19:02 +02:00
Vladimir Zapolskiy
5b32b1368a memory: pl172: correct MPMC peripheral ID register bits 
According to PL172 TRM read of bits [7:6] of MPMCPeriphID3 is
undefined, so unmask them. Also the driver supports all currently
present revisions of PL172, this allows to alleviate requirements to
the revision version matched by the driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
 2015-09-29 22:19:02 +02:00
Linus Torvalds
9a9952bbd7 IOMMU Updates for Linux v4.3 
This time the IOMMU updates are mostly cleanups or fixes. No big new
 features or drivers this time. In particular the changes include:
 
 	* Bigger cleanup of the Domain<->IOMMU data structures and the
 	  code that manages them in the Intel VT-d driver. This makes
 	  the code easier to understand and maintain, and also easier to
 	  keep the data structures in sync. It is also a preparation
 	  step to make use of default domains from the IOMMU core in the
 	  Intel VT-d driver.
 
 	* Fixes for a couple of DMA-API misuses in ARM IOMMU drivers,
 	  namely in the ARM and Tegra SMMU drivers.
 
 	* Fix for a potential buffer overflow in the OMAP iommu driver's
 	  debug code
 
 	* A couple of smaller fixes and cleanups in various drivers
 
 	* One small new feature: Report domain-id usage in the Intel
 	  VT-d driver to easier detect bugs where these are leaked.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJV7sCEAAoJECvwRC2XARrjz3YP/Au4IIfqykfPvmI0cmPhVnAV
 Q72tltwkbK2u2iP+pHheveaMngJtAshsZrnhBon4KJRIt/KTLZQvsFplHDaRhPfY
 yw3LIxhC5kLG/S6irY9Ozb0+uTMdQ3BU2uS23pyoFVfCz+RngBrAwDBcTKqZDCDG
 8dNd+T21XlzxuyeGr58h9upz2VFtq6feoGFhLU5PNxTlf4JWZe77D7NlbSvx6Nwy
 7Ai8dVRgpV9ciUP7w8FXrCUvbMZQDIoTMiWGNSlogVMgA0dllGES91UZYhWf3pil
 abuX6DeFul/cOhEOnH2xa+j5zz2O/upe9stU4wAFw6IhPiAELTHc2NKlWAhwb0SY
 bpDRf7dgLnUfqpmZLpWjTwN4jllc0qS2MIHj+eUu0uhdFi4Z0BuH2wSCdbR7xkqk
 u5u0Jq7hDNKs5FmQTSsWSiAdjakMsRjIN7jMrBbOeZnBSmUnLx74KGPLTb63ncR3
 WIOi4Iyu+LSXBIvZDiLu3lIIh7Atzd+y7IDnb8KXdyqfy+h53OZZOJNbP/qTWHgT
 ZUdm/qrqjIQpTQfleOEadC7vY/y3fR5sBtOQHUamfntni3oYCc4AMRlNdf3eV9lb
 Tyss6F699mU7d/vennTaIToBgVwaXdLYtmvGWjnoT/kqOMclyDf3cIUtZGtp2rJR
 ddmzDA3vBUC5pGj8Hd8R
 =yoGE
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates for from Joerg Roedel:
 "This time the IOMMU updates are mostly cleanups or fixes.  No big new
  features or drivers this time.  In particular the changes include:

   - Bigger cleanup of the Domain<->IOMMU data structures and the code
     that manages them in the Intel VT-d driver.  This makes the code
     easier to understand and maintain, and also easier to keep the data
     structures in sync.  It is also a preparation step to make use of
     default domains from the IOMMU core in the Intel VT-d driver.

   - Fixes for a couple of DMA-API misuses in ARM IOMMU drivers, namely
     in the ARM and Tegra SMMU drivers.

   - Fix for a potential buffer overflow in the OMAP iommu driver's
     debug code

   - A couple of smaller fixes and cleanups in various drivers

   - One small new feature: Report domain-id usage in the Intel VT-d
     driver to easier detect bugs where these are leaked"

* tag 'iommu-updates-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (83 commits)
  iommu/vt-d: Really use upper context table when necessary
  x86/vt-d: Fix documentation of DRHD
  iommu/fsl: Really fix init section(s) content
  iommu/io-pgtable-arm: Unmap and free table when overwriting with block
  iommu/io-pgtable-arm: Move init-fn declarations to io-pgtable.h
  iommu/msm: Use BUG_ON instead of if () BUG()
  iommu/vt-d: Access iomem correctly
  iommu/vt-d: Make two functions static
  iommu/vt-d: Use BUG_ON instead of if () BUG()
  iommu/vt-d: Return false instead of 0 in irq_remapping_cap()
  iommu/amd: Use BUG_ON instead of if () BUG()
  iommu/amd: Make a symbol static
  iommu/amd: Simplify allocation in irq_remapping_alloc()
  iommu/tegra-smmu: Parameterize number of TLB lines
  iommu/tegra-smmu: Factor out tegra_smmu_set_pde()
  iommu/tegra-smmu: Extract tegra_smmu_pte_get_use()
  iommu/tegra-smmu: Use __GFP_ZERO to allocate zeroed pages
  iommu/tegra-smmu: Remove PageReserved manipulation
  iommu/tegra-smmu: Convert to use DMA API
  iommu/tegra-smmu: smmu_flush_ptc() wants device addresses
  ...
 2015-09-08 17:22:35 -07:00
Linus Torvalds
ff474e8ca8 powerpc updates for 4.3 
- Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt
  - EEH fixes for SRIOV from Gavin
  - Introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
  - Use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras
  - Seccomp filter support from Michael Ellerman
  - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar
  - Add powerpc timebase as a trace clock source from Naveen N. Rao
  - Misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
  - Add an inline function to update POWER8 HID0 from Gautham R. Shenoy
  - Fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
  - Drop support for 64K local store on 4K kernels from Michael Ellerman
  - move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan
  - Initialize distance lookup table from drconf path from Nikunj A Dadhania
  - Enable RTC class support from Vaibhav Jain
  - Disable automatically blocked PCI config from Gavin Shan
  - Add LEDs driver for PowerNV platform from Vasant Hegde
  - Fix endianness issues in the HVSI driver from Laurent Dufour
  - Kexec endian fixes from Samuel Mendoza-Jonas
  - Fix corrupted pdn list from Gavin Shan
  - Fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
 
  - Freescale updates from Scott: Highlights include 32-bit memcpy/memset
    optimizations, checksum optimizations, 85xx config fragments and updates,
    device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor
    fixes.
 
  - A ton of cxl updates & fixes:
   - Add explicit precision specifiers from Rasmus Villemoes
   - use more common format specifier from Rasmus Villemoes
   - Destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
   - Destroy afu->contexts_idr on release of an afu from Johannes Thumshirn
   - Compile with -Werror from Daniel Axtens
   - EEH support from Daniel Axtens
   - Plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
   - Add alternate MMIO error handling from Ian Munsie
   - Allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan
   - Remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
   - Release irqs if memory allocation fails from Vaibhav Jain
   - Remove racy attempt to force EEH invocation in reset from Daniel Axtens
   - Fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
   - Fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie
   - Set up and enable PSL Timebase from Philippe Bergheaud
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5+GzAAoJEFHr6jzI4aWA0iAP/jcd0kNaNBzLgcDKKygKdgz4
 xn4EWu81vfMfZYWesb0ATrjlH0hLsRxSXoFUqUMhtJTa5kNAoCIaz/M8WBALS50h
 aT+i7br4WEU2j2FcaMyP3iAZx/2hl+2utODJSHPRWPkec1fUDBfEyBf++e520RWM
 HUQGIGZXh8yq7KMA96Pwhsvls9vOB8hS2UdU/NS8ff3J5jFvXC1/WmF2qfzJBS1V
 8iHyz26Jl8+dJ+et7iC2oD5XQAjIH1oJgOyPVPBzAQttfi8RjuVzRA30TfPBAUwI
 lC9nlmPy6bCe4kiQYWVB1z7GegHyW/9vkeuMj/u8mZbqpaayMEMZmd2C3iNDXNHx
 i2NSvdln539t4qWYsV2v6lVCfa/ayDHD73Wackj5Dk394tzXnpCPhxNzc2yKEd5v
 h7vwYc9jBhsbfSCSogaM+gSHJ1APgCidggHJMYYNA2nN2u6V62RpsMB7zp/1+Q2v
 yqYdD8oYF4Dm21x/ujaNFrlizROD46WS0UqdJ3yP6HAqRYIpRXtibmpECJgt1n5h
 HjADEci4hQ2UQxdMdp/Q5KZnPTJebBtrZrmkW5r6cZBUaTB5TVkFaEWN44CT/Loh
 tMNeA3qOBN06CaQS2WL3UUUWpbZq9fSbWuUZ5lWZDb5AOyRxe5eWVYNLkiyIXozY
 L24l1bYdBhXahnjoS/kc
 =n9+X
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask
   from Benjamin Herrenschmidt

 - EEH fixes for SRIOV from Gavin

 - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth

 - use hardware RNG for arch_get_random_seed_* not arch_get_random_*
   from Paul Mackerras

 - seccomp filter support from Michael Ellerman

 - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh
   Salgaonkar

 - add powerpc timebase as a trace clock source from Naveen N.  Rao

 - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual

 - add an inline function to update POWER8 HID0 from Gautham R.  Shenoy

 - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman

 - drop support for 64K local store on 4K kernels from Michael Ellerman

 - move dma_get_required_mask() from pnv_phb to pci_controller_ops from
   Andrew Donnellan

 - initialize distance lookup table from drconf path from Nikunj A
   Dadhania

 - enable RTC class support from Vaibhav Jain

 - disable automatically blocked PCI config from Gavin Shan

 - add LEDs driver for PowerNV platform from Vasant Hegde

 - fix endianness issues in the HVSI driver from Laurent Dufour

 - kexec endian fixes from Samuel Mendoza-Jonas

 - fix corrupted pdn list from Gavin Shan

 - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan

 - Freescale updates from Scott: Highlights include 32-bit memcpy/memset
   optimizations, checksum optimizations, 85xx config fragments and
   updates, device tree updates, e6500 fixes for non-SMP, and misc
   cleanup and minor fixes.

 - a ton of cxl updates & fixes:
    - add explicit precision specifiers from Rasmus Villemoes
    - use more common format specifier from Rasmus Villemoes
    - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
    - destroy afu->contexts_idr on release of an afu from Johannes
      Thumshirn
    - compile with -Werror from Daniel Axtens
    - EEH support from Daniel Axtens
    - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
    - add alternate MMIO error handling from Ian Munsie
    - allow release of contexts which have been OPENED but not STARTED
      from Andrew Donnellan
    - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
    - release irqs if memory allocation fails from Vaibhav Jain
    - remove racy attempt to force EEH invocation in reset from Daniel
      Axtens
    - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
    - fix force unmapping mmaps of contexts allocated through the kernel
      api from Ian Munsie
    - set up and enable PSL Timebase from Philippe Bergheaud

* tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits)
  cxl: Set up and enable PSL Timebase
  cxl: Fix force unmapping mmaps of contexts allocated through the kernel api
  cxl: Fix + cleanup error paths in cxl_dev_context_init
  powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()
  powerpc/pseries: Cleanup on pci_dn_reconfig_notifier()
  powerpc/pseries: Fix corrupted pdn list
  powerpc/powernv: Enable LEDS support
  powerpc/iommu: Set default DMA offset in dma_dev_setup
  cxl: Remove racy attempt to force EEH invocation in reset
  cxl: Release irqs if memory allocation fails
  cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE
  powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver
  powerpc/powernv: Reset HILE before kexec_sequence()
  powerpc/kexec: Reset secondary cpu endianness before kexec
  powerpc/hvsi: Fix endianness issues in the HVSI driver
  leds/powernv: Add driver for PowerNV platform
  powerpc/powernv: Create LED platform device
  powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
  powerpc/powernv: Fix the log message when disabling VF
  cxl: Allow release of contexts which have been OPENED but not STARTED
  ...
 2015-09-03 16:41:38 -07:00
Linus Torvalds
102178108e ARM: SoC driver updates for v4.3 
Some releases this branch is nearly empty, others we have more stuff. It
 tends to gather drivers that need SoC modification or dependencies such
 that they have to (also) go in through our tree.
 
 For this release, we have merged in part of the reset controller tree
 (with handshake that the parts we have merged in will remain stable),
 as well as dependencies on a few clock branches.
 
 In general, new items here are:
 
 - Qualcomm driver for SMM/SMD, which is how they communicate with the
   coprocessors on (some) of their platforms
 - Memory controller work for ARM's PL172 memory controller
 - Reset drivers for various platforms
 - PMU power domain support for Marvell platforms
 - Tegra support for T132/T210 SoCs: PMC, fuse, memory controller per-SoC support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5Ou9AAoJEIwa5zzehBx3/k4P/jA5CVNiDvIs0GoTR3uGOuec
 MYd19oKf76reV1oL5bBSpg9uryJd3fPzK0JC/qU3pYfsCVFp2TWZD7liNpitqHyt
 2xL02gzJQgjHzL3QrxTQrOFJDO6P8Vm2k/5pI0KX1beoulHvI+iHejNryXGjSKSx
 9vbs1GPXU9IV831YOHSaMmHz727J65bbZE8Up113ctT+WbEIc1g/ihKzUgi/8xXW
 RniMxGsX8HynE3VH+UBDMbY6XkOmzZa1Wabgll735MXwIUFG1+TsvHNuGehXUski
 ySwqk67en25i0F/Q7oobLSZwCPbA6Ylxk9aOfr0AnAqOEKwgKWS+K7HkEiNMz7yh
 nt22b5SVkQ80sTCbNEkdJajOZ8oRalUae19CGxvMfVh77LmQ2sRI9iJrwXcxkt8W
 ASs6uDDAUNC5pIWfjeJE50vsDr//Hed/WtsIjenYOtb+RI1kru5iTTgp4oLPBiy5
 OeHxOfiL7gPvyZQbuPgMKAGdoGBsa/7wTM7KWJCMP6mPGHpShO8XUUsuljqKHm4w
 nBV7eZRMiIuWkjRKw4bjp7R0NVKR5sOfAkZhjCsXB0aqA/NU2zyNbViWcGCh6yj8
 3beZ93SdEdrKX6N8pPiAhGTMFA6eev8YeUHO7kM4IhC91ILjHlPpCs1pYk3pwEkO
 ABC7GyMY6Olg1pZJweEa
 =B6jn
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Some releases this branch is nearly empty, others we have more stuff.
  It tends to gather drivers that need SoC modification or dependencies
  such that they have to (also) go in through our tree.

  For this release, we have merged in part of the reset controller tree
  (with handshake that the parts we have merged in will remain stable),
  as well as dependencies on a few clock branches.

  In general, new items here are:

   - Qualcomm driver for SMM/SMD, which is how they communicate with the
     coprocessors on (some) of their platforms

   - memory controller work for ARM's PL172 memory controller

   - reset drivers for various platforms

   - PMU power domain support for Marvell platforms

   - Tegra support for T132/T210 SoCs: PMC, fuse, memory controller
     per-SoC support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  ARM: tegra: cpuidle: implement cpuidle_state.enter_freeze()
  ARM: tegra: Disable cpuidle if PSCI is available
  soc/tegra: pmc: Use existing pclk reference
  soc/tegra: pmc: Remove unnecessary return statement
  soc: tegra: Remove redundant $(CONFIG_ARCH_TEGRA) in Makefile
  memory: tegra: Add Tegra210 support
  memory: tegra: Add support for a variable-size client ID bitfield
  clk: shmobile: rz: Add CPG/MSTP Clock Domain support
  clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support
  clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support
  clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support
  clk: shmobile: Add CPG/MSTP Clock Domain support
  ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets
  reset: reset-zynq: Adding support for Xilinx Zynq reset controller.
  docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.
  MIPS: ath79: Add the reset controller to the AR9132 dtsi
  reset: Add a driver for the reset controller on the AR71XX/AR9XXX
  devicetree: Add bindings for the ATH79 reset controller
  reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property
  doc: dt: add documentation for lpc1850-rgu reset driver
  ...
 2015-09-01 13:00:04 -07:00
Linus Torvalds
50686e8a3a ARM: SoC platform updates for v4.3 
New or improved SoC support:
 
 - Addition of support for Atmel's SAMA5D2 SoC
 - Addition of Freescale i.MX6UL
 - Improved support of TI's DM814x platform
 - Misc fixes and improvements for RockChip platforms
 - Marvell MVEBU suspend/resume support
 
 A few driver changes that ideally would belong in the drivers branch are
 also here (acked by appropriate maintainers):
 
 - Power key input driver for Freescale platforms (svns)
 - RTC driver updates for Freescale platforms (svns/mxc)
 - Clk fixes for TI DM814/816X
 
 + a bunch of other changes for various platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5Mo6AAoJEIwa5zzehBx3VnMP/28LFJVUjIbd2xjJBo2gbSwV
 jN7uGlTkKU+1kHjZqnUPuirlBxBzsXKgRfBvCoeu0cPOggwmFcaF915/HHPz7xuz
 vTP7k98+Y5nSXScIohWkWCdZTpKKjve4sn74rXmiNakTUiuaHf5lKut/m7ldVrWd
 hN1o9W4LN+5O1mOYbc9ZD98v3bkDb6eu+a22oK7qemXiEiQi+NIMoDx+IR2bd4pA
 FeDaW7sOFWTEYU/p+M5nZNvI3n53P0/mlB5rPRiAYRjhQf9DrWHm5G7HdnMkUkgo
 /s8/QlVjBkJwhkY0TqpwtHY23JjSSB6UtCnXzb1eVAkX1nJN6PJQpcpCz1zJhd9q
 +sJ2k1zEvrfomJCK7/iZ1ubQE09KlJLEeb8xi5xCwD0MBOBAYC31bovDVAswCitV
 8NHnfltEG+wCMyX955eqqGkVxkcw8sJMJUK5A95aK6w+vKqjd7gUgLJjXFC1u4eN
 ECuVVUf1hVmUEmM799CDayTlfGDt4oGLmHGao+SiSCVc1XbG9HkWr7Lcgr6u9UHr
 lNv3RIe6Axb85xxIU0/9hqLHrtB85uEQjjlbnQx3o7u8RsSOeaiZvCz4BzcjP9E1
 VGyD6zkRWhuDiMFlPVXiAX0qIH5xSjIWkC0wPNJNy8eWFH9tkfGL0mOlLbl09oGR
 gtuvOrjbF/BhILkPw38y
 =8T5Z
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "New or improved SoC support:

   - add support for Atmel's SAMA5D2 SoC
   - add support for Freescale i.MX6UL
   - improved support for TI's DM814x platform
   - misc fixes and improvements for RockChip platforms
   - Marvell MVEBU suspend/resume support

  A few driver changes that ideally would belong in the drivers branch
  are also here (acked by appropriate maintainers):

   - power key input driver for Freescale platforms (svns)
   - RTC driver updates for Freescale platforms (svns/mxc)
   - clk fixes for TI DM814/816X

  + a bunch of other changes for various platforms"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: rockchip: pm: Fix PTR_ERR() argument
  ARM: imx: mach-imx6ul: Fix allmodconfig build
  clk: ti: fix for definition movement
  ARM: uniphier: drop v7_invalidate_l1 call at secondary entry
  memory: kill off set_irq_flags usage
  rtc: snvs: select option REGMAP_MMIO
  ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE
  ARM: BCM: Enable ARM erratum 798181 for BRCMSTB
  ARM: OMAP2+: Fix power domain operations regression caused by 81xx
  ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend
  ARM: rockchip: set correct stabilization thresholds in suspend
  ARM: rockchip: rename osc_switch_to_32k variable
  ARM: imx6ul: add fec MAC refrence clock and phy fixup init
  ARM: imx6ul: add fec bits to GPR syscon definition
  rtc: mxc: add support of device tree
  dt-binding: document the binding for mxc rtc
  rtc: mxc: use a second rtc clock
  ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback
  soc: mediatek: Fix SCPSYS compilation
  ARM: at91/soc: add basic support for new sama5d2 SoC
  ...
 2015-09-01 12:18:40 -07:00
Olof Johansson
21815b9a24 ARM: tegra: Memory controller updates for v4.3-rc1 
Adds support for Tegra210, which allows the SMMU to be used on this new
 SoC generation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVzfK2AAoJEN0jrNd/PrOhR2cP/RYqGcXQMbHPnDY4Za7dXtGW
 nG+NFNLBdVsyPk7ol9p1WRNKVkWSObJ4RN669CyRbk6JvBf7xYXSp9i0mh7FSMow
 WBCk3sraN8L8txXOYMnut2+b/3xNGrVxgh8RmQ4aRZY+UDMXlX+cAyuEBhGTDR1G
 N0KhIO3SYDGRMCJ6w3sV0lT+Ac0I5+iG94kRxoqyaO/mi/EA3I3rOaYaiHujCQxJ
 1LrQAY35NTC0Pwsdqq7ivPEHkL9Ki4/rvPnVocZea4H+MSZ/gTSHpe7rPOF4vGPS
 imERpyN4eJwZlQnOC8ism3TQPHGiKux8xEtNBV76IHmB27O7A+cJhQWFzdKGQpGB
 tMcqyr5aJGFwJ2Rba0NKo61xyIqXgE4pW85DKAuN6cnWlZ5+J8Mjv5788tMShwMI
 aMPm3na6gtiH2zhkE0MEt0qizDM9BUnlF3be5gVQejr4jNDOFe62opvyzq42iO2z
 8NQ9amgMQXfwql7Wr6T+Fa5VgTPRS2VEjf7knJaYFXVih5nP5SGK6fvkLIb2MN07
 DKZ5rbrXBxx4kpZiftnE1wPwQC6EHg5FT+4MDW877Lw1dbDllM179cOgRJowLo0G
 zkPOvHKiQFLx/32MZJfXp5vbDeX11Q2LOgNc+/D46dSm7ElnuEXylnc4vOuvFDU9
 AkuPLVT4wos1SsvtL8v6
 =H73u
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

ARM: tegra: Memory controller updates for v4.3-rc1

Adds support for Tegra210, which allows the SMMU to be used on this new
SoC generation.

* tag 'tegra-for-4.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: Add Tegra210 support
  memory: tegra: Add support for a variable-size client ID bitfield
  memory: tegra: Expose supported rates via debugfs

Signed-off-by: Olof Johansson <olof@lixom.net>
 2015-08-20 18:50:17 -07:00
Joerg Roedel
54e466fde4 iommu/tegra-smmu: Changes for v4.3-rc1 
A bunch of improvements by Russell King, along with a fix to restore
 display support when using the SMMU. This was due to the SMMU driver
 writing the wrong value of active TLB lines, effectively disabling the
 TLB and causing massive underflows on the display controller because
 of the latency introduced by the SMMU.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVzfJEAAoJEN0jrNd/PrOh9+oP/0SQz9xOzQsTHD4yT9bPg84E
 sZU+xWbUhSU3ni1Hq1I4F1HIAlCdlMsXlB7c2wTpTE55lgeDlHh5olG7Dc+6cLi2
 hAlgooMMS1TShLlcHwMDOyyvXrkjg2qLp4sy4fyPVUcYUeZIREd9RfoCEbbS/4nV
 IQV3Q99zXi1rRBILROTRdd/3AfIS1XYvOQyTIM5dzgB2Kc9MC+C2tjC2zbVg0yPK
 TFzAzTwwvagbcxvfl1y3NtYTU27VOoE7uDRGYNaXyZxbi0TwyIX+4sZvf9M84aED
 zuEJwi+V3AqMWDu6JrQXuw1WAN/602pXtPdjSMFCi/bBdlCTgq+tTCvsSMcABXZ5
 Pyk1XUPuT0UvD7GMROZRaDYmMw2fVyjswf1rjb18szw7HUEfYIdDWiuU8g1g44AB
 3SqM1F1bxdBZ52q9gFWpuOR06E8cC7lr/FPtduseUbF39N9n8JfFZEI6+w3uXdrj
 7TCEULNLvFp+oNzexHrbd/jGhrkW4aK78HttQpwpq4GW7zGeco/EW3BXC2zN5aJc
 YIfR0wVT5UrsCp2poRwpZFKtkxZVqU5t4IoB7XbL32vh1GAZf408XzAeiqYIcwv5
 537XpLg6cqGqqAw+G5TrVWS1oVYbPIiTLyHHzkEEnBlgwccSrzbDSaqzpruOMF84
 EhB0Rcuh9kFs6JIxdLnz
 =N5EP
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.3-iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/tegra

iommu/tegra-smmu: Changes for v4.3-rc1

A bunch of improvements by Russell King, along with a fix to restore
display support when using the SMMU. This was due to the SMMU driver
writing the wrong value of active TLB lines, effectively disabling the
TLB and causing massive underflows on the display controller because
of the latency introduced by the SMMU.
 2015-08-17 14:16:59 +02:00
Thierry Reding
11cec15bf3 iommu/tegra-smmu: Parameterize number of TLB lines 
The number of TLB lines was increased from 16 on Tegra30 to 32 on
Tegra114 and later. Parameterize the value so that the initial default
can be set accordingly.

On Tegra30, initializing the value to 32 would effectively disable the
TLB and hence cause massive latencies for memory accesses translated
through the SMMU. This is especially noticeable for isochronuous clients
such as display, whose FIFOs would continuously underrun.

Fixes: 8918465163 ("memory: Add NVIDIA Tegra memory controller support")
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-08-13 17:05:28 +02:00
Thierry Reding
588c43a7bd memory: tegra: Add Tegra210 support 
Add the table of memory clients and SWGROUPs for Tegra210 to enable SMMU
support for this new SoC.

Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-08-13 16:07:52 +02:00
Paul Walmsley
3c01cf3bef memory: tegra: Add support for a variable-size client ID bitfield 
Recent versions of the Tegra MC hardware extend the size of the client
ID bitfield in the MC_ERR_STATUS register by one bit.  While one could
simply extend the bitfield for older hardware, that would allow data
from reserved bits into the driver code, which is generally a bad idea
on principle.  So this patch instead passes in the client ID mask from
from the per-SoC MC data.

There's no MC support for T210 (yet), but when that support winds up
in the kernel, the appropriate soc->client_id_mask value for that chip
will be 0xff.

Based on an original patch by David Ung <davidu@nvidia.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: David Ung <davidu@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-08-13 16:07:52 +02:00
Russell King
4b3c7d1076 iommu/tegra-smmu: Move flush_dcache to tegra-smmu.c 
Drivers should not be using __cpuc_* functions nor outer_cache_flush()
directly.  This change partly cleans up tegra-smmu.c.

The only difference between cache handling of the tegra variants is
Denver, which omits the call to outer_cache_flush().  This is due to
Denver being an ARM64 CPU, and the ARM64 architecture does not provide
this function.  (This, in itself, is a good reason why these should not
be used.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[treding@nvidia.com: fix build failure on 64-bit ARM]
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-08-13 16:06:40 +02:00
Rob Herring
ed293d1ad2 memory: kill off set_irq_flags usage 
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also set IRQ_NOPROBE and this has been maintained although it is not
clear that is really needed. There appears to be a great deal of blind
copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Roger Quadros <rogerq@ti.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2015-08-13 00:48:52 -07:00
Tomeu Vizoso
e984a1791a memory: omap-gpmc: Don't try to save uninitialized GPMC context 
If for some reason the GPMC device hasn't been probed yet, gpmc_base is
going to be NULL. Because there's no context yet to be saved, just turn
these functions into no-ops until that device gets probed.

Unable to handle kernel NULL pointer dereference at virtual address 00000010
pgd = c0204000
[00000010] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc5-next-20150804-05947-g23f38fe8eda9 #1
Hardware name: Generic OMAP3-GP (Flattened Device Tree)
task: c0e623e8 ti: c0e5c000 task.ti: c0e5c000
PC is at omap3_gpmc_save_context+0x8/0xc4
LR is at omap_sram_idle+0x154/0x23c
pc : [<c087c7ac>]    lr : [<c023262c>]    psr: 60000193
sp : c0e5df40  ip : c0f92a80  fp : c0999eb0
r10: c0e57364  r9 : c0e66f14  r8 : 00000003
r7 : 00000000  r6 : 00000003  r5 : 00000000  r4 : c0f5f174
r3 : c0fa4fe8  r2 : 00000000  r1 : 00000000  r0 : fa200280
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 80204019  DAC: 00000015
Process swapper/0 (pid: 0, stack limit = 0xc0e5c220)
Stack: (0xc0e5df40 to 0xc0e5e000)
df40: 00000000 c0e66ef8 c0f5f1a4 00000000 00000003 c02333a4 c3813822 00000000
df60: 00000000 c0e5a5c8 cfb8a5d0 c07f0c44 0e4f1d7e 00000000 00000000 00000000
df80: c3813822 00000000 cfb8a5d0 c0e5e4e4 cfb8a5d0 c0e66f14 c0e5a5c8 c0e5e54c
dfa0: c0e5e544 c0e57364 c0999eb0 c0277758 000000fa c0f5d000 00000000 c0d61c18
dfc0: ffffffff ffffffff 00000000 c0d61674 00000000 c0df7a48 00000000 c0f5d5d4
dfe0: c0e5e4c0 c0df7a44 c0e634f8 80204059 00000000 8020807c 00000000 00000000
[<c087c7ac>] (omap3_gpmc_save_context) from [<c023262c>] (omap_sram_idle+0x154/0x23c)
[<c023262c>] (omap_sram_idle) from [<c02333a4>] (omap3_enter_idle_bm+0xec/0x1a8)
[<c02333a4>] (omap3_enter_idle_bm) from [<c07f0c44>] (cpuidle_enter_state+0xbc/0x284)
[<c07f0c44>] (cpuidle_enter_state) from [<c0277758>] (cpu_startup_entry+0x174/0x24c)
[<c0277758>] (cpu_startup_entry) from [<c0d61c18>] (start_kernel+0x358/0x3c0)
[<c0d61c18>] (start_kernel) from [<8020807c>] (0x8020807c)
Code: c0ccace8 c0ccacc0 e59f30b4 e5932000 (e5921010)

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Suggested-by: Javier Martinez Canillas <javier@dowhile0.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Roger Quadros <rogerq@ti.com>
[tony@atomide.com: updated description as suggested by Javier]
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2015-08-12 01:43:49 -07:00
Jaiprakash Singh
cf184dc2dd fsl_ifc: Change IO accessor based on endianness 
IFC IO accressor are set at run time based
on IFC IP registers endianness.IFC node in
DTS file contains information about
endianness.

Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
 2015-08-07 22:59:34 -05:00
Joachim Eastwood
0ff818eff5 memory: pl172: fix modular build 
Building pl172 as a module fails with:
> ERROR: "of_default_bus_match_table" [drivers/memory/pl172.ko] undefined!

Because the symbol of_default_bus_match_table isn't exported by the OF
core code so can't be referenced from modules. Fix this by removing
the usage of of_default_bus_match_table for now. The side effect of
this is that child nodes can't use "simple-bus" or "simple-mfd".

Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2015-07-22 16:10:09 -07:00
Joachim Eastwood
17c50b700c memory: add ARM PL172 MultiPort Memory Controller driver 
This driver makes it possible to configure the static memory
chip selects on the ARM PL172 MultiPort Memory Controller
from a set of properties in DT. Configuration of dynamic
memory is not supported and is left to the boot loader.

The intended usage is to setup timing and configuration for
static memory devices like NAND and NOR Flash before they
are probed by a driver.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2015-07-17 10:43:44 -07:00
Thierry Reding
30a636f984 memory: tegra: Expose supported rates via debugfs 
In order to ease testing, expose the list of supported EMC frequencies
via debugfs.

Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-07-16 09:51:47 +02:00
Tony Lindgren
ae745302c0 Merge branch 'fixes-rc1' into omap-for-v4.2/fixes 2015-07-06 05:33:17 -07:00
Linus Torvalds
f5dcb68086 ARM: SoC: driver updates for v4.2 
Some of these are for drivers/soc, where we're now putting
 SoC-specific drivers these days. Some are for other driver subsystems
 where we have received acks from the appropriate maintainers.
 
 Some highlights:
 
 - simple-mfd: document DT bindings and misc updates
 - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
 - memory: support for Tegra132 SoC
 - memory: introduce tegra EMC driver for scaling memory frequency
 - misc. updates for ARM CCI and CCN busses
 
  Conflicts:
 	arch/arm64/boot/dts/arm/juno-motherboard.dtsi
 
  Trivial add/add conflict with our dt branch.
  Resolution: take both sides.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RRAAoJEFk3GJrT+8ZljIcQAIsqxM/o0drd90xTJ6ex9h0B
 RmqVLTDgesHmBacJ+SBsa9/ybFIM1uErByftc1dmKankEQVXW3wcH7keQnoStPT2
 zTEjadHgZ/ARYjV/oG5oohjfDZpO1kECVHL8O8RmcWxgzRB3az1IW2eD+dzrga/Y
 R7K6D8rDHMADIUmv0e0DzvQEbSUYdCx3rBND1qZznwZDP3NoivLkOG5MTraccLbQ
 ouCRoZtyNYD5Lxk+BHLBepnxAa0Ggc6IjEmiUv8fF2OYdu0OruMliT4rcAtOSmzg
 2Y7pP85h8u0CxbJDkOyc+2BELyKo7Hv97XtDNNbRYABTMXdskRIadXt4Sh4mwFtM
 nvlhB4ovbIX7noECJToEkSAgmStLSUwA3R6+DVdLbeQY4uSuXuTRhiWHMyQB6va9
 CdjJDk2RE0dZ77c5ZoUnUDtBe4cULU/n4agpYkKMf/HcpnqMUwZzP4KZbbPMBpgL
 0CVTt3YrEcjoU7g0SFHhOGPSgl4yIXKU2eHEscokyFYLrS5zRWepmUEmlSoaWn+W
 p7pJE65TvOGf2xbaWI+UBeK/3ZG7XAP8qUfhsi7NS4bV6oFCk/foqsWAuru0H7OW
 2Gk8fuF0qLgE1eFWQp8BHZ4IUeytoWbnGhhHXh8zH39SKAVncOiAGDNfuEP9CyXJ
 fZFfruYrnz2emOwj2v9m
 =02Gm
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...
 2015-06-26 11:54:29 -07:00
Tony Lindgren
63aa945b10 memory: omap-gpmc: Add Kconfig option for debug 
We support decoding the bootloader values if DEBUG is defined.
But we also need to change the struct omap_hwmod flags to have
HWMOD_INIT_NO_RESET to avoid the GPMC being reset during the
boot. Otherwise just the default timings will be displayed
instead of the bootloader configured timings.

This also allows us to clean up the various GPMC related
hwmod flags. For debugging, we only need HWMOD_INIT_NO_RESET,
and HWMOD_INIT_NO_IDLE is not needed.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
 2015-06-01 19:22:10 -06:00
Tony Lindgren
28a7eedd11 memory: omap-gpmc: Fix parsing of devices 
We currently artificially limit the parsing of GPMC connected
devices based on the device name. Let's stop doing that, it's
confusing as adding devices to .dts files with using normal
names like fpga and usb will currently cause them to not probe.

Cc: Roger Quadros <rogerq@ti.com>
Reported-by: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2015-06-01 15:00:44 -07:00
Arnd Bergmann
44fb3026ad ARM: tegra: Add EMC driver for v4.2-rc1 
This introduces the EMC driver that's required to scale the external
 memory frequency.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVU1FHAAoJEN0jrNd/PrOhClAQAKDOt5OYvadTfmPogJiwxlQl
 7NvVVsnIzHfScANP6B/pynoC8Gfx1owRdLzPPWKM860gtdtaA9pXOWRuxQV8NLcR
 5WQO4Z4sNXyvA704MNFK+EqydCN2Iu/Z+2Ups8VHZ9VmukSNaCu/se6JvW+GJMm1
 DHytjzHeckNUruNrZnXLA6ckwymDbMtCBV3W9hIeKe9aPjJrgjR7Rlhhu7cX9XGF
 XSCF9eigh4MsyLgf3cWMoVl2NIePCW3sbAQEKkiM5xzPo21VlpPyja7OWoytcQkC
 HEMmuICfwT8XEd7fTabW+WHxTnVhkL+OZ833p+LSBUCeXJ82N8vSV8HZlRHly9LZ
 diXoJ9+2l/C02FtnnB7BtLxnyQ2NF6LAP1CvYZ7eF/Z+lxthErs0bIXyjC0RTuBN
 9y6t0/VhEGMv6ApOly1VrHLtU6LnQEbYryvlOjvP4NQVb6jQc165UdPZtXufgx9o
 VprQoOIHdBzMnThI7ndRWgZcayn+VmJy0TvjTGmhLcurwigbCjkqYdwhq2c7Z0F2
 FpEOCqWMJ0mywQXoZadIk5ON51IVRin0otyKed14PY9QU6c6hJ6NCZQi1pQnB95W
 Ut7ZrdZnZMIjMui8EOzeJc82mjKL3agpbYTQqqiIV+kHY9dXpxSOOHd4DbMN5Kc2
 3xvgkGtj61VOlGiGnp/W
 =QeY4
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.2-emc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Merge "ARM: tegra: Add EMC driver for v4.2-rc1" from Thierry Reding:

This introduces the EMC driver that's required to scale the external
memory frequency.

* tag 'tegra-for-4.2-emc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: Add EMC frequency debugfs entry
  memory: tegra: Add EMC (external memory controller) driver
  memory: tegra: Add API needed by the EMC driver
  of: Add Tegra124 EMC bindings
  of: Document timings subnode of nvidia,tegra-mc
 2015-05-13 17:59:35 +02:00
Mikko Perttunen
9c77a81f21 memory: tegra: Add EMC frequency debugfs entry 
This file in debugfs can be used to get or set the EMC frequency.
Reading the file will return the currently set frequency in Hz, while
writing the file sets the specified frequency rounded to the next
highest frequency supported by the board.

Will be very useful when tuning memory scaling.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
[treding@nvidia.com: add "emc" debugfs directory]
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-05-05 11:39:48 +02:00
Mikko Perttunen
73a7f0a906 memory: tegra: Add EMC (external memory controller) driver 
Implements functionality needed to change the rate of the memory bus
clock.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-05-05 11:12:17 +02:00
Mikko Perttunen
3d9dd6fdd2 memory: tegra: Add API needed by the EMC driver 
The EMC driver needs to know the number of external memory devices and
also needs to update the EMEM configuration based on the new rate of the
memory bus.

To know how to update the EMEM config, looks up the values of the burst
regs in the DT, for a given timing.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-05-05 11:10:19 +02:00
Tomeu Vizoso
6f0a4d0c26 memory: tegra: Disable ARBITRATION_EMEM interrupt 
As this interrupt is just for development purposes, as the TRM says, and
the sheer amount of interrupts fired can seriously disrupt userspace
when testing the lower frequencies supported by the EMC.

From the TRM:

"There is one performance warning type interrupt: ARBITRATION_EMEM. It
fires when the MC detects that a request has been pending in the Row
Sorter long enough to hit the DEADLOCK_PREVENTION_SLACK_THRESHOLD. In
addition to true performance problems, this interrupt may fire in
situations such as clock-change where the EMC backpressures pending
traffic for long periods of time. This interrupt helps developers
identify and debug performance issues and configuration issues."

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-05-04 15:09:36 +02:00
Thierry Reding
242b1d7133 memory: tegra: Add Tegra132 support 
The memory controller on Tegra132 is very similar to the one found on
Tegra124. But the Denver CPUs don't have an outer cache, so dcache
maintenance is done slightly differently.

Signed-off-by: Thierry Reding <treding@nvidia.com>
 2015-05-04 12:54:23 +02:00