Commit graph

263 commits

Author SHA1 Message Date
Thierry Reding
b65af27ad8 pwm: tegra: Use NSEC_PER_SEC
Instead of using the literal value for the number of nanoseconds per
second, use the macro instead to increase readability.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-02-18 08:40:29 +01:00
Markus Elfring
8d6cc07385 pwm: Remove unnecessary check before of_node_put()
The of_node_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-02-03 12:56:54 +01:00
Naidu Tellapati
277bb6a29e pwm: Imagination Technologies PWM DAC driver
The Pistachio SOC from Imagination Technologies includes a Pulse Width
Modulation DAC which produces 1 to 4 digital bit-outputs which represent
digital waveforms. These PWM outputs are primarily in charge of controlling
backlight LED devices.

Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Signed-off-by: Sai Masarapu <Sai.Masarapu@imgtec.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
[thierry.reding: fixup license header as discussed on list]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-01-30 12:16:04 +01:00
Ajit Pal Singh
cd264b6a65 pwm: sti: Maintain a bitmap of configured devices
This patch introduces a bitmap which is used to keep track of the
pwm channels which have been configured in a pwm chip.

The method used earlier to find the number of configured channels,
was to count the pwmdevices with PWMF_REQUESTED field set
and period value configured. This was not correct and failed
when of_pwm_get()/pwm_get() and then pwm_config() was used.

Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-01-30 12:16:03 +01:00
Alexandre Belloni
09853ce7bc pwm: Add Allwinner SoC support
This adds a generic PWM framework driver for the PWM controller
found on Allwinner SoCs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-01-30 12:16:01 +01:00
Boris BREZILLON
df6922adec pwm: atmel-hlcdc: Prevent division by zero
The slow and system clock should never return a rate of zero, but this
might happen if the clocks property defined in the DT is referencing the
wrong clocks.

Prevent any division by zero from happening by testing the clk_freq
value before calling do_div().

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-01-30 12:16:00 +01:00
Thierry Reding
d2048c4915 pwm: atmel-hlcdc: Depend on HAVE_CLK
The include/linux/clk.h header defines dummy implementations for the
various clk_*() functions if HAVE_CLK is not selected to improve build
coverage in randconfig builds.

The dummy implementation of clk_get_rate() returns 0, which causes the
Atmel HLCDC PWM driver's atmel_hlcdc_pwm_config() implementation to end
up calling:

	do_div(clk_period_ns, 0)

On x86, do_div(n, base) will end up evaluating to this:

	n >>= ilog2(base)

with base = 0, the implementation of ilog2() will call ____ilog2_NaN(),
which is purposely undefined and results in a linker failure:

	ERROR: "____ilog2_NaN" [drivers/pwm/pwm-atmel-hlcdc.ko] undefined!

The implementation of do_div() checks that base is a power of 2 before
calling ilog2(). The compiler doesn't optimize this away, presumably
because is_power_of_2() is an inline function and the compiler doesn't
or can't inspect it closely enough. ilog2() being a macro it still ends
up generating the ____ilog2_NaN() because of the constant 0.

The root of the problem is that the driver really should be checking
before possibly dividing by zero. That should eventually be fixed, but
for now just assume that the clock runs at a sensible frequency when
available.

Reported-by: Jim Davis <jim.epost@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-01-30 12:15:58 +01:00
Linus Torvalds
0b4954c469 pwm: Changes for v3.19-rc1
There are two new drivers, one for the BCM2835 (Raspberry Pi) and one
 used in conjunction with the LCD controller on various Atmel SoCs. The
 Samsung PWM driver can now be built for 64-bit ARM (Exynos7).
 
 A couple of fixes have been applied to the FTM PWM driver and system
 sleep support was added.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUkURIAAoJEN0jrNd/PrOhG6QQAIyoyd6eJfS+cN7+qHN9W6Wd
 X5qu60iwspn8TrzxnsyUPVNYndmKET5jbjmOL5BbHeh+L+Urnfo3BlkLeGN0jKC5
 LZiS7SzzLcFwYufcV22rycF97KO11LVd5vQ3WKhD/tJljTSVemiUZeCFddkWfuwr
 ngE3W3+2opmAepvkW3GyvaaLaRhYPDKgWYYvKkmtsH6jcqpikAxsn5+5Uzctu8aM
 MlU9/nSq4JmM2BUHEgwN76tFi6qrcY7uGKwkE80aO70rDLOWPhoM7T4L1XegSSI3
 DFURuvYo528L2hXC6CnShBZEsvjXmIdG/WxuxPtcKVZNfCAwfJqpDXBTQJz/MFlz
 fHykAZfjfNju+Y3iprc6QgnLQOv5+j0ZRRx55adVysXBqMAbaJjmKj0uCLsKZa3w
 tNt5YzuUs3FHI7UHq7L3+e2WhT0TtxJgTiSyP7Jvbt8iUY9GVJpEz5gmOx0KRYSz
 lS0MUBPNMIZjtBQqtotWfSb9f+mJPYxQkpbOfodiZnouLbqStrO/GZ+7O3+aJQ5Y
 8+yrj3PgqwSXQkf3d4Y72RnMjfCqO1RSg6a9Qe1Txz9aXBQlTPOZxylwZHiMYdxm
 yF1rzP1LWRlcHHroB/lLOJ4xNjUhLqvhFQT/hlRR8bygl+v67SCEX0gii0AwTYHU
 4bAM7asKUBnOfYcvsuaX
 =jD3K
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There are two new drivers, one for the BCM2835 (Raspberry Pi) and one
  used in conjunction with the LCD controller on various Atmel SoCs.
  The Samsung PWM driver can now be built for 64-bit ARM (Exynos7).

  A couple of fixes have been applied to the FTM PWM driver and system
  sleep support was added"

* tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling
  pwm: ftm: Add Power Management support for FTM PWM
  pwm: ftm: Add regmap rbtree type cache support
  pwm: ftm: Correctly track usage count
  pwm: samsung: Allow Samsung PWM driver to be enabled on Exynos7
  pwm: add DT bindings documentation for atmel-hlcdc-pwm driver
  pwm: add support for atmel-hlcdc-pwm device
  pwm: Add BCM2835 PWM driver
2014-12-17 10:10:51 -08:00
Boris BREZILLON
39e046f2c1 pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling
at91sam9x5 has an errata forbidding the use of slow clk as a clk source and
sama5d3 SoCs has another errata forbidding the use of div1 prescaler.

Take both of these erratas into account.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-12-04 11:32:36 +01:00
Xiubo Li
97d0b42e39 pwm: ftm: Add Power Management support for FTM PWM
Add PM support for FTM PWM driver using callback function suspend
and resume in .driver.pm of platform_driver.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-12-01 10:48:54 +01:00
Xiubo Li
49599cf6bb pwm: ftm: Add regmap rbtree type cache support
This patch is to prepare for adding PM support for FTM PWM driver using
callback function suspend and resume in .driver.pm of platform_driver.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-12-01 10:44:48 +01:00
Xiubo Li
8e6e765102 pwm: ftm: Correctly track usage count
No matter how many times the FTM PWM is enabled, the use_count will
always be one.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-12-01 10:43:45 +01:00
Abhilash Kesavan
06e4cb6b1d pwm: samsung: Allow Samsung PWM driver to be enabled on Exynos7
To re-use the existing PWM driver for 64-bit ARM based Exynos7 SoC, make
the driver depend on ARCH_EXYNOS along with PLAT_SAMSUNG.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-11-17 12:24:17 +01:00
Boris Brezillon
2b4984bef4 pwm: add support for atmel-hlcdc-pwm device
The HLCDC IP available in some Atmel SoCs (i.e. at91sam9x5, at91sam9n12
or sama5d3 families for instance) provides a PWM device.

This driver add support for a PWM chip exposing a single PWM device (which
will most likely be used to drive a backlight device).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Anthony Harivel <anthony.harivel@emtrion.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-11-17 12:20:17 +01:00
Bart Tanghe
e5a06dc5ac pwm: Add BCM2835 PWM driver
Add PWM driver for Broadcom BCM2835 processor (Raspberry Pi)

Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-11-17 12:20:13 +01:00
Greg Kroah-Hartman
a8a93c6f99 Merge branch 'platform/remove_owner' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next
Remove all .owner fields from platform drivers
2014-11-03 19:53:56 -08:00
Linus Torvalds
5b9c897252 pwm: Changes for v3.18-rc1
There are no new drivers here, only a couple of fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJURLy0AAoJEN0jrNd/PrOhP8UP/Auwzo3Wd0cFJEnJVdyrj9sN
 l0Wwnib3edKQDNhPmnQE77fXT3oo4XhdNAzoCRfcy+e/yVq6p3og+tz6z87DahCt
 nnfKCTK8MRw1d4tniVHVhi0BDSfbjXdJCiXe/mmqfPTegIxF5ps7JnHbTZuIOx8i
 XRfxBvAqmmXGmNQANfW7/iZdDzSKQ70DjHIBFn/pa1eLQG2lJ54joo/yeA1Kk0Ly
 CSJGF7L7XLV9mWxXA1vZWGgpIV6dduObtOpRlOwPkG7tGmXInbUery0G429ah8ce
 o7LevARZ41yi7fA6nDtNDG8FWq7oavq0jWvRQuq8M5xn+aYGmYZdd/W47Xc0xUnF
 eGAmz0q78poDTZDA1EXoY/6Og+JgI8x+PpDxaRN4FIa6gpkcTQEuafpo9BLfGo4K
 PTDckq3FqOkIcX5jA4X5OP8lgnz08PZDQaE6QomuNpeKJRy/3aEKWRJ+C4XWcF9t
 7bgkBTLEOq51UXUNuPjogGtwmW8Mf6WOfRdvaRLiTH7KJlJjgwxJYrs0o2D1q7bz
 TbZeDRcRhG7ZfR/5nz7qDEA8FjgwOLCMciqBT4wBc47Er7VaURWl5aoSuTxalJ3A
 hqk8jbwKhaAO+L7N6Jzqk1TqxOKC9HbhaJO7to4gir07bEpXOHQu1jFwZEAmRbvH
 x1prpzzghUPmVv0WYh36
 =llZK
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "There are no new drivers here, only a couple of fixes all over the
  place"

* tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Let PWM_CLPS711X depend on HAS_IOMEM
  pwm: atmel: Fix calculation of prescale value
  pwm: Fix uninitialized warnings in pwm_get()
  pwm: rockchip: Allow polarity invert on rk3288
  pwm: imx: Avoid sample FIFO overflow for i.MX PWM version2
  pwm: imx: Cleanup indentation for register definitions
  pwm: imx: Fix the macro MX3_PWMCR_PRESCALER(x) definition
  pwm: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  pwm: lpss: make it buildable only on X86
  pwm: lpss: use c99 initializers in structures
  pwm: lpss: Fix build failure on PowerPC
  pwm: lpss: pci: Move to use pcim_enable_device()
  pwm: lpss: Properly split driver to parts
  pwm: lpss: Add ACPI and PCI IDs for Intel Braswell
  pwm: fsl-ftm: Select REGMAP_MMIO
  pwm: fsl-ftm: Document 'big-endian' property
  pwm: fsl-ftm: Convert to direct regmap API usage
  pwm: fsl-ftm: Clean up the code
2014-10-21 08:17:43 -07:00
Wolfram Sang
f05fae14a1 pwm: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:28 +02:00
Chen Gang
dec02f98ae pwm: Let PWM_CLPS711X depend on HAS_IOMEM
PWM_CLPS711X needs HAS_IOMEM, so depend on it, the related error (with
allmodconfig under um):

    MODPOST 1205 modules
  ERROR: "devm_ioremap_resource" [drivers/pwm/pwm-clps711x.ko] undefined!
  ERROR: "devm_ioremap" [drivers/net/phy/mdio-bcm-unimac.ko] undefined!

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-20 09:39:44 +02:00
Nikolaus Voss
e2e0897010 pwm: atmel: Fix calculation of prescale value
The prescale value used for calculating the period was incremented
afterwards, thus the resulting prescale value is by one too high.
This resulted in a PWM frequency only half as high as requested.

This patch moves the 64 bit division out of the prescale loop to
correct the above issue and make the calculation more efficient.

Signed-off-by: Nikolaus Voss <n.voss@weinmann-emt.de>
Tested-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-09-25 08:52:39 +02:00
Arnd Bergmann
c40c4028f0 Second batch of AT91 cleanup for 3.18:
- Timer Counter (TC) fixup and cleanup:
   - fix segmentation fault when kexec-ing a kernel by masking
     TC interrupts at shutdown and probe time
   - use modern driver model: devm_*, probe function, sanitize IRQ request
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJUDaNIAAoJEAf03oE53VmQ6lAH/RyGo8yEbupiRy7OQjc/k+Xo
 LkklJnnLzNSs42Y2GIRQ8XhlZwgVsoSfCWbgJL3M/YVgPzktETRREygOpYN7BN0w
 ibj3Y2ftQc/94va+QjoUJKcvP4UQULSczTuU0GeEy6XUoPSdiYZNqNRy/O5XdujK
 w4rTXBlAuVTRv6fppEPAEKcNH6fUW51D3x4/4qI9w0pzLXbvdS0lAjEo1bbbipp7
 0PWJmDtkpeGn1wEdVyNkBY2ASEuRqjtWAL41joYGNtrcy43V79ZEn+TkTonfJ02L
 /qqRyuhHHk+0zOuBIVRlLw5BzddXaqpRXqClM8qdOkDvbz6eL9CcCNCUF3lHcgo=
 =Ao6T
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup2' of git://github.com/at91linux/linux-at91 into next/cleanup

Pull "Second batch of AT91 cleanup for 3.18" from Nicolas Ferre:
- Timer Counter (TC) fixup and cleanup:
  - fix segmentation fault when kexec-ing a kernel by masking
    TC interrupts at shutdown and probe time
  - use modern driver model: devm_*, probe function, sanitize IRQ request

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'at91-cleanup2' of git://github.com/at91linux/linux-at91:
  clocksource: tcb_clksrc: sanitize IRQ request
  ARM: at91/tclib: mask interruptions at shutdown and probe
  ARM: at91/tclib: move initialization from alloc to probe
  ARM: at91/tclib: prefer using of devm_* functions
2014-09-09 17:03:17 +02:00
Gaël PORTAY
4930d247af ARM: at91/tclib: move initialization from alloc to probe
Move resource retrieval from atmel_tc_alloc to tc_probe to avoid lately
reporting resource related issues when a TC block user request a TC block.

Moreover, resources retrieval are usually done in the probe function,
thus moving them add some consistency with other drivers.

Initialization is done once, ie not every time a tc block is requested.
If it fails, the device is not appended to the list of tc blocks.

Furhermore, the device id is retrieved at probe as well, avoiding parsing
DT every time the user requests of tc block.

Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-08 10:54:03 +02:00
Geert Uytterhoeven
70145f8713 pwm: Fix uninitialized warnings in pwm_get()
With some versions of gcc (e.g. 4.1.2):

drivers/pwm/core.c: In function ‘pwm_get’:
drivers/pwm/core.c:610: warning: ‘polarity’ may be used uninitialized in this function
drivers/pwm/core.c:609: warning: ‘period’ may be used uninitialized in this function

While these are false positives, we can get rid of them by refactoring
the code to store a pointer to the best match, as suggested before by
Thierry Reding. This does require moving the mutex_unlock() down.

Fixes: d717ea73e3 ("pwm: Fix period and polarity in pwm_get() for non-perfect matches")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-29 10:18:19 +02:00
Doug Anderson
7264354c0c pwm: rockchip: Allow polarity invert on rk3288
The rk3288 has the ability to invert the polarity of the PWM.  Let's
enable that ability.  Note that this increases pwm_cells to 3 for
rk3288.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Caesar Wang <caesar.wang@rock-chips.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-26 10:44:08 +02:00
Liu Ying
137fd45ffe pwm: imx: Avoid sample FIFO overflow for i.MX PWM version2
The i.MX PWM version2 is embedded in several i.MX SoCs, such as i.MX27,
i.MX51 and i.MX6SL.  There is a 4-word (16 bit) sample FIFO in this IP.
Each FIFO slot determines the duty period of a PWM waveform in one full
cycle.  The IP spec mentions that we should not write a fourth sample
because the FIFO will become full and triggers a FIFO write error (FWE)
which will prevent the PWM from starting once it is enabled.  In order
to avoid any sample FIFO overflow issue, this patch clears all sample
FIFO by doing software reset in the configuration hook when the
controller is disabled or waits for a full PWM cycle to get a
relinquished FIFO slot when the controller is enabled and the FIFO is
fully loaded.

The FIFO overflow issue can be reproduced by the following commands on
the i.MX6SL EVK platform, assuming we use PWM2 for the debug LED which
is driven by the pin HSIC_STROBE and the maximal brightness is 255.

	echo 0   > /sys/class/leds/user/brightness
	echo 0   > /sys/class/leds/user/brightness
	echo 0   > /sys/class/leds/user/brightness
	echo 0   > /sys/class/leds/user/brightness
	echo 255 > /sys/class/leds/user/brightness

Here, FWE happens (PWMSR register reads 0x58) and the LED can not be
lighten.

Another way to reproduce the FIFO overflow issue is to run this script:

	while true;
		do echo 255 > /sys/class/leds/user/brightness;
	done

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: linux-pwm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25 15:46:42 +02:00
Liu Ying
40f260c2ce pwm: imx: Cleanup indentation for register definitions
This patch contains no logic change to cleanup indentation for register
definitions only.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: linux-pwm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25 15:46:36 +02:00
Liu Ying
bd59bdc898 pwm: imx: Fix the macro MX3_PWMCR_PRESCALER(x) definition
This patch adds missing parentheses around the argument of the macro
MX3_PWMCR_PRESCALER(x) to avoid any potential macro expansion issue.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: linux-pwm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25 15:46:28 +02:00
Xiubo Li
533acc0e8d pwm: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
Since we cannot make sure the 'chip->npwm' will always be none zero here,
and then if either equal to zero, the kzalloc() will return ZERO_SIZE_PTR,
which equals to ((void *)16).

So this patch fix this with just doing the zero check before calling kzalloc().

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25 14:38:12 +02:00
Andy Shevchenko
ad16202de8 pwm: lpss: make it buildable only on X86
There is no sign of this IP block on non-x86 architectures and rather will not
be. Thus, make this explicit by applying a direct dependency to X86.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25 11:46:37 +02:00
Julia Lawall
b2b7adeb21 pwm: lpss: use c99 initializers in structures
Use c99 initializers for structures.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@

struct i1 {
 fs
 T fld;
 ...};

@bad@
identifier decl.i1,i2;
expression e;
initializer list[decl.n] is;
@@

struct i1 i2 = { is,
+ .fld = e
- e
 ,...};
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[thierry.reding: rebased and applied same fix for Braswell]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25 11:45:34 +02:00
Thierry Reding
e0c86a3b63 pwm: lpss: Fix build failure on PowerPC
An x86 build seems to pull in the linux/io.h include indirectly. On
PowerPC that doesn't happen and the build breaks due to the readl() and
writel() functions not being declared. Fix this by explicitly including
linux/io.h.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-23 00:25:52 +02:00
Andy Shevchenko
90927fe9a0 pwm: lpss: pci: Move to use pcim_enable_device()
Let's use managed functions for this driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-23 00:25:51 +02:00
Andy Shevchenko
c558e39e14 pwm: lpss: Properly split driver to parts
The driver consists of core, PCI, and platform parts. It would be better
to split them into separate files.

The platform driver is now called pwm-lpss-platform. Thus, previously
set CONFIG_PWM_LPSS=m is not enough to build it. But we are on the safe
side since it seems no one from outside Intel is using it for now.

While here, move to use macros module_pci_driver() and
module_platform_driver().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
[thierry.reding: change select to depends on PWM_LPSS, cleanup]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-23 00:25:47 +02:00
Alan Cox
373c57829a pwm: lpss: Add ACPI and PCI IDs for Intel Braswell
This is pretty much the same as Baytrail PWM. Only difference is that the
input clock runs on different frequency.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-22 11:52:30 +02:00
Fabio Estevam
00018a8ae5 pwm: fsl-ftm: Select REGMAP_MMIO
Commit 42fa98a9c3 ("pwm: fsl-ftm: Convert to direct regmap API usage")
introduced the following error when REGMAP_MMIO=n:

drivers/built-in.o: In function `fsl_pwm_probe':
>> pwm-fsl-ftm.c:(.text+0xd7d7): undefined reference to `devm_regmap_init_mmio_clk'

Select select REGMAP_MMIO in order to fix this error.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-22 10:17:01 +02:00
Xiubo Li
42fa98a9c3 pwm: fsl-ftm: Convert to direct regmap API usage
The regmap core supports different endian modes for devices. This patch
convert to direct regmap API usage, preparing to support big endianness
for LS1 SoC.

Using the regmap framework it will be easy to support devices that only
differ in endianness with the same device driver.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-20 10:10:12 +02:00
Xiubo Li
cd6d92d2aa pwm: fsl-ftm: Clean up the code
This patch intends to prepare for converting to direct regmap API usage.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-20 10:09:54 +02:00
Geert Uytterhoeven
d717ea73e3 pwm: Fix period and polarity in pwm_get() for non-perfect matches
If pwm_get() finds a look-up entry with a perfect match (both dev_id and
con_id match), the loop is aborted, and "p" still points to the correct
struct pwm_lookup.

If only an entry with a matching dev_id or con_id is found, the loop
terminates after traversing the whole list, and "p" now points to
arbitrary memory, not part of the pwm_lookup list.
Then pwm_set_period() and pwm_set_polarity() will set random values for
period resp. polarity.

To fix this, save period and polarity when finding a new best match,
just like is done for chip (for the provider) and index.

This fixes the LCD backlight on r8a7740/armadillo-legacy, which was fed
period 0 and polarity -1068821144 instead of 33333 resp. 1.

Fixes: 3796ce1d4d ("pwm: add period and polarity to struct pwm_lookup")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-18 10:58:43 +02:00
Linus Torvalds
34b20e6df6 pwm: Changes for v3.17-rc1
The set of changes for this merge window contains two new drivers: one
 for Rockchip SoCs and another for STMicroelectronics STiH4xx SoCs. The
 remainder of the changes are the usual small cleanups such as removing
 redundant OOM messages, signalling that a PWM chip's operations can
 sleep and removing an unneeded dependency.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJT5LH8AAoJEN0jrNd/PrOhm1gQAKZUW7ueTT5Ar9cwBvWwtHSr
 qLtTx0GxJ91cH6h2bNkhBLz3A2ps9KPcxWgDxfod4TyOHsqZmbAwVHZzORyxr3Hi
 n5iQST0SpH/Qon5iptbJdmdeDOJ2MOvLU6YrlCO5XdGzJjVt1JeCXCuYZn1FG4IJ
 rsZbvkp3w0U3BuRwq41FK2RqwlMp+6VkAjMd5gqLL8/AWnLGy+T5pLtADiOyNeBa
 f9EDqrVXz0PwuLt7JXR2TktAVEv/vlGWKnmqYWGTEr45BDsxRVdV49QMnMIIjrPA
 ohLKqYJgX5bU4XwHfbePLU/Jt8P1Kc+bdh4iTpMJSTEETdnMt0W9GdpwI+hKZThH
 hZoALp9KBimIh/To8LnuSLeJ4NItkXelLZzzvGbX4wJSSBtA/CvG+1akyRnhE86m
 Z5xp71tIBAQ45KHBz6sN95NTQirCLgbfReE7jo2xfAspqY8yUotorMoYdHz/gWMs
 xX/x4BdcfYBd25YDYT6SwNLZ0uGwtwxnRvzNURmpLu6WY177cg50CgL32skxVvIJ
 TlsQDVyQj8DcIb0GfevUk1X7EL6lYz2czjgpA2HvyNIXJRGJhm5+1iyTcaGOYQ4F
 WsZj8GI8ECF/LYssa4tyrT2WW7MbHpXY1f4Qn3AD+XymtSQ6la8pPEh2YXBPWwvr
 ep6Sbib+61h+mIMem25i
 =ZE0j
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "The set of changes for this merge window contains two new drivers: one
  for Rockchip SoCs and another for STMicroelectronics STiH4xx SoCs.

  The remainder of the changes are the usual small cleanups such as
  removing redundant OOM messages, signalling that a PWM chip's
  operations can sleep and removing an unneeded dependency"

* tag 'pwm/for-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: rockchip: Added to support for RK3288 SoC
  pwm: rockchip: document RK3288 SoC compatible
  pwm: sti: Remove PWM period table
  pwm: sti: Sync between enable/disable calls
  pwm: sti: Ensure same period values for all channels
  pwm: sti: Fix PWM prescaler handling
  pwm: sti: Supply Device Tree binding documentation for ST's PWM IP
  pwm: sti: Add new driver for ST's PWM IP
  pwm: imx: set can_sleep flag for imx_pwm
  pwm: lpss: remove dependency on clk framework
  pwm: pwm-tipwmss: remove unnecessary OOM messages
  pwm: rockchip: document device tree bindings
  pwm: add Rockchip SoC PWM support
2014-08-08 18:06:29 -07:00
Caesar Wang
f630629908 pwm: rockchip: Added to support for RK3288 SoC
This patch added to support the PWM controller found on
RK3288 SoC.

Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08 13:12:47 +02:00
Ajit Pal Singh
3aacd3e187 pwm: sti: Remove PWM period table
Removes the PWM period table. Instead the prescaler is computed
from the period value passed in the config() function.

Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08 13:12:46 +02:00
Ajit Pal Singh
6ad6b838e1 pwm: sti: Sync between enable/disable calls
ST PWM IP has a common enable/disable control for all the PWM
channels on a PWM cell. Disables PWM output on the PWM HW only
when disable is called for the last channel.

Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08 13:12:45 +02:00
Ajit Pal Singh
5165166e8a pwm: sti: Ensure same period values for all channels
ST PWM IP shares the same clock prescaler across all the PWM
channels. Hence configuration requests which change the period
will affect all the channels. Do not allow period changes which
will stomp period settings of the already configured channels.

Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08 13:12:45 +02:00
Ajit Pal Singh
bf9cc80b6c pwm: sti: Fix PWM prescaler handling
This patch fixes the pwm driver to write the complete 8 bits of
the prescaler value to the PWM Control register.

Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08 13:12:40 +02:00
Lee Jones
378fe115d1 pwm: sti: Add new driver for ST's PWM IP
This driver supports all current STi platforms' PWM IPs.

Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[thierry.reding: rename module to pwm-sti, fix build breakage]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07 16:18:27 +02:00
Shawn Guo
31c4fa3442 pwm: imx: set can_sleep flag for imx_pwm
The .config() hook imx_pwm_config() calls clk APIs like clk_prepare()
and clk_get_rate(), which might sleep, so we need to set can_sleep flag
on pwm_chip.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07 13:22:44 +02:00
Heikki Krogerus
65accd8738 pwm: lpss: remove dependency on clk framework
Unlike other Intel LPSS devices, the PWM does not have the
clock dividers or the gate. All we get from the clock is the
rate. Since PCI case uses the driver data to get the rate,
we can drop the clk and use the same data also in case of
ACPI. The frequency is the same.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07 13:18:03 +02:00
Jingoo Han
ed1a819a3f pwm: pwm-tipwmss: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message. The following
checkpatch warning is also removed.

  WARNING: Possible unnecessary 'out of memory' message

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07 13:14:33 +02:00
Beniamino Galvani
101353c82a pwm: add Rockchip SoC PWM support
This commit adds a driver for the PWM controller found on Rockchip
RK29, RK30 and RK31 SoCs.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-07-11 15:54:51 +02:00
Alexandre Belloni
bb4bbbaae2 PWM: atmel: allow building for AVR32
The Atmel PWM IP can be found on avr32 chips. This allows selecting and building
the driver on avr32.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09 15:13:31 +02:00