When OCXL is enabled and HOTPLUG_PCI is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for HOTPLUG_PCI_POWERNV
Depends on [n]: PCI [=y] && HOTPLUG_PCI [=n] && PPC_POWERNV [=y] && EEH [=y]
Selected by [y]:
- OCXL [=y] && PPC_POWERNV [=y] && PCI [=y] && EEH [=y]
The reason is that OCXL selects HOTPLUG_PCI_POWERNV without depending on
or selecting HOTPLUG_PCI while HOTPLUG_PCI_POWERNV is subordinate to
HOTPLUG_PCI.
HOTPLUG_PCI_POWERNV is a visible symbol with a set of dependencies.
Selecting it will lead to overlooking its other dependencies as well.
Let OCXL depend on HOTPLUG_PCI_POWERNV instead to avoid Kbuild issues.
Fixes: 49ce94b867 ("ocxl: Add PCI hotplug dependency to Kconfig")
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200918094148.20525-1-fazilyildiran@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kbuild rule to build MHI should use the append operator. This fixes
the below warning reported by Kbuild test bot.
WARNING: modpost: missing MODULE_LICENSE() in
drivers/bus/mhi/core/main.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/pm.o
WARNING: modpost: missing MODULE_LICENSE() in
drivers/bus/mhi/core/boot.o
Fixes: 0cbf260820 ("bus: mhi: core: Add support for registering MHI controllers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-19-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no requirement for using a dedicated IRQ per event ring.
Some systems does not support multiple MSI vectors (e.g. intel
without CONFIG_IRQ_REMAP), In that case the MHI controller can
configure all the event rings to use the same interrupt (as fallback).
Allow this by removing the nr_irqs = ev_ring test and add extra check
in the irq_setup function.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce sysfs entries to enable userspace clients the ability to read
the serial number and the OEM PK Hash values obtained from BHI. OEMs
need to read these device-specific hardware information values through
userspace for factory testing purposes and cannot be exposed via degbufs
as it may remain disabled for performance reasons. Also, update the
documentation for ABI to include these entries.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mani: used dev_groups to manage sysfs attributes]
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce debugfs entries to show state, register, channel, device,
and event rings information. Allow the host to dump registers,
issue device wake, and change the MHI timeout to help in debug.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-15-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kconfig coding style mandates use of tabs for the configuration
definition and an additional two spaces for the help text. Make the
required changes to the MHI Kconfig adhering to those guidelines.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rwlock.h should not be included directly. Instead linux/splinlock.h
should be included. Including it directly will break the RT build.
Also there is no point in including _types.h headers directly. There is
no benefit in including the type without the accessor.
Fixes: 0cbf260820 ("bus: mhi: core: Add support for registering MHI controllers")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MHI channel, event and controller config data needs to be
treated read only information. Add const qualifier to make
sure config information passed by MHI controller is not
modified by MHI core driver.
Suggested-by: Kalle Valo <kvalo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Client devices should use the APIs provided to allocate and free
the MHI controller structure. This will help ensure that the
structure is zero-initialized and there are no false positives
with respect to reading any values such as the serial number or
the OEM PK hash.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device hardware specific information such as serial number and the OEM
PK hash can be read using BHI and saved on host to identify the
endpoint.
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use counters to track MHI device state transitions such as those
to M0, M2, or M3 states. This can help in better debug, allowing
the user to see the number of transitions to a certain MHI state
when queried using debugfs entries or via other mechanisms.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to determine whether the device is in a
powered ON state and resides in one of the active MHI states. This will
allow for some use cases where access can be pre-determined.
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An MHI device is not necessarily associated with only channels as we can
have one associated with the controller itself. Hence, the chan_name
field within the mhi_device structure should instead be replaced with a
generic name to accurately reflect any type of MHI device.
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible that the host may be suspending or suspended and may
not allow an outgoing device wake assert immediately if a client has
requested for it. Ensure that the host wakes up and allows for it so
the client does not have to wait for an external trigger or an
outgoing packet to be queued for the host resume to occur.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Autonomous low power mode support requires the MHI host to resume from
multiple places and post a wakeup source to exit system suspend. This
needs to be done in a non-blocking manner. Introduce a helper API to
trigger the host resume for data transfers and other non-blocking use
cases while supporting implementation of autonomous low power modes.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing check to abort suspends if a client driver has pending
outgoing packets to send to the device. This allows better utilization
of the MHI bus wherein clients on the host are not left waiting for
longer suspend or resume cycles to finish for data transfers.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop doubled word "table" in kernel-doc.
Fix syntax for the kernel-doc notation for struct image_info.
Note that the bhi_vec field is private and not part of the kernel-doc.
Drop doubled word "device" in a comment.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mani: Added bus: prefix to the commit subject]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
-----BEGIN PGP SIGNATURE-----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=ALTw
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.10-rc1
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
* tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits)
soundwire: sysfs: add slave status and device number before probe
soundwire: bus: add enumerated Slave device to device list
soundwire: remove an unnecessary NULL check
soundwire: cadence: add data port test fail interrupt
soundwire: intel: enable test modes
soundwire: enable Data Port test modes
soundwire: intel: use {u32|u16}p_replace_bits
soundwire: cadence: use u32p_replace_bits
soundwire: qcom: get max rows and cols info from compatible
soundwire: qcom: add support to block packing mode
soundwire: qcom: clear BIT FIELDs before value set.
soundwire: Add generic bandwidth allocation algorithm
soundwire: cadence: add parity error injection through debugfs
soundwire: bus: export broadcast read/write capability for tests
ASoC: codecs: realtek-soundwire: ignore initial PARITY errors
soundwire: bus: use quirk to filter out invalid parity errors
soundwire: slave: add first_interrupt_done status
soundwire: bus: filter-out unwanted interrupt reports
ASoC/soundwire: bus: use property to set interrupt masks
soundwire: qcom: fix SLIBMUS/SLIMBUS typo
...
There are a number of subdirectories and files in drivers/char/ that
have their own maintainers and developers and ways of getting patches to
Linus. This includes random.c, IPMI, hardware random drivers, TPM
drivers, and agp drivers. Instead of sending those patches to Arnd and
myself, who can't do anything with them, send them to the proper
developers instead.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20200930121007.GA1615300@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(struct scatterlist),flags)
...
sg_init_table(x,n)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1600601186-7420-14-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit f188b5e76a ("coresight: etm4x: Save/restore state
across CPU low power states"), mistakenly TRCVMIDCCTLR1 register
value was saved in trcvmidcctlr0 state variable which is used to
store TRCVMIDCCTLR0 register value in etm4x_cpu_save() and then
same value is written back to both TRCVMIDCCTLR0 and TRCVMIDCCTLR1
in etm4x_cpu_restore(). There is already a trcvmidcctlr1 state
variable available for TRCVMIDCCTLR1, so use it.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-26-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enhance coresight developer's efficiency to debug coresight drivers.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight by the Makefile
- modules can have only one init/exit, so we add the etm_perf
register/unregister function calls to the core init/exit
functions.
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-25-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-catu as modules, for ease of development.
- Kconfig becomes a tristate, to allow =m
- add catu_remove functions, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-24-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make etr_catu_buf_ops static. Instead of directly accessing it in
etr_buf_ops[], add a function to let catu driver register the ops at
runtime. Break circular dependency between tmc-etr and catu drivers.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-23-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-cti as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight-cti by the Makefile
- add an cti_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
- move cti_remove_conn_xrefs to cti_remove since all sysfs links
have gone when system calls device_release.
Reviewed-by Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-22-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CTI device is enabled when associated coresight device is enabled.
Increase the module and device reference count for CTI device
when it's enabled. This can prevent CTI device be removed or
module be unloaded when CTI device is enabled by an active trace
session.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-21-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If associated ect device is not enabled at first place, disable
routine should not be called. Add ect_enabled flag to check whether
ect device is enabled. Fix the issue in below case. Ect device is
not available when associated coresight device enabled and the
association is established after coresight device is enabled.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-20-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During module unload, a coresight driver module will call back into
the CTI driver to remove any links between the two devices.
The current code has 2 issues:-
1) in the CTI driver the matching code is matching to the wrong device
so misses all the links.
2) The callback is called too late in the unload process resulting in a
crash.
This fixes both the issues.
Fixes: 177af8285b ("coresight: cti: Enable CTI associated with devices")
Reported-by: Tingwei Zhang <tingwei@codeaurora.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-19-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CTI code to remove sysfs link to other devices on shutdown, incorrectly
tries to remove a single ended link when these are all double ended. This
implementation leaves elements in the link info structure undefined which
results in a crash in recent tests for driver module unload.
This patch corrects the link removal code.
Fixes: 73274abb65 ("coresight: cti: Add in sysfs links to other coresight devices")
Reported-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-18-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-replicator as modules, for ease of development.
- Kconfig becomes a tristate, to allow =m
- combine static and dynamic replicator init into single
module_init/exit call
- add replicator_remove functions, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Co-developed-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-funnel as module, for ease of development.
- combine static and dynamic funnel init into single
module_init/exit call
- add funnel_remove functions, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Co-developed-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-tmc as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight-tmc by the Makefile
- add an tmc_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-tpiu as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- add a tpiu_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-etb10 as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- add an etb_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-etm4x as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight-etm4x by the Makefile
- add an etm4_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
- delay advertising the per-cpu etmdrvdata
- protect etmdrvdata[] by modifying it on relevant CPU
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-etm3x as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight-etm3x by the Makefile
- add an etm_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
- delay advertising the per-cpu etmdrvdata
- protect etmdrvdata[] by modifying it on relevant CPU
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When coresight_build_path() fails on all the cpus, etm_setup_aux
calls etm_free_aux() to free allocated event_data.
WARN_ON(cpumask_empty(mask) will be triggered since cpu mask is empty.
Check event_data->snk_config is not NULL first to avoid this
warning.
Fixes: f5200aa983 ("coresight: perf: Refactor function free_event_data()")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Kconfig becomes a tristate, to allow =m
- add a stm_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When coresight device is in an active session, driver module of
that device should not be removed. Use try_get_module() in
coresight_grab_device() to prevent module to be unloaded.
Use get_device()/put_device() to protect device data
in the middle of active session.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add coresight prefix to make it specific. It will be a export symbol.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED
that is true for both built-ins and modules, instead. Required
when building coresight components as modules.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define a MODULE_DEVICE_TABLE for cpu_debug so module can
be auto loaded on boot.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide name of cpu_debug module in Kconfig help section.
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MIPI DisCo device properties that are read by the driver from
platform firmware, or hard-coded in the driver, should only be
provided as sysfs entries when a driver probes successfully.
However the device status and device number is updated even when there
is no driver present, and hence can be updated when a Slave device is
detected on the bus without being described in platform firmware and
without any driver registered/probed.
As suggested by GregKH, the attribute group for Slave status and
device number is is added by default upon device registration.
Credits to Vinod Koul for the status_show() function, shared in a
separate patch and used as is here. The status table was modified to
remove an unnecessary enum and status_show() is handled in a different
group attribute than what was suggested by Vinod.
Tested-by: Srinivas Kandgatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Co-developed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200924194430.121058-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
