Extract useful fields from a received ACK packet into the skb private data
early on in the process of parsing incoming packets. This makes the ACK
fields available even before we've matched the ACK up to a call and will
allow us to deal with path MTU discovery probe responses even after the
relevant call has been completed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Clean up the DATA packet resending algorithm to retransmit packets as we
come across them whilst walking the transmission buffer rather than queuing
them for retransmission at the end. This can be done as ACK parsing - and
thus the discarding of successful packets - is now done in the same thread
rather than separately in softirq context and a locked section is no longer
required.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Move the recording of a successfully transmitted DATA or ACK packet that
will provide RTT probing to after the transmission. With the I/O thread
model, this can be done because parsing of the responding ACK can no longer
race with the post-transmission code.
Move the various timeout-settings done after successfully transmitting a
DATA packet into rxrpc_tstamp_data_packets() and eliminate a number of
calls to get the current time.
As a consequence we no longer need to cancel a proposed RTT probe on
transmission failure.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Track the call timeouts as ktimes rather than jiffies as the latter's
granularity is too high and only set the timer at the end of the event
handling function.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
There are three points that transmit PING ACKs and all of them use the same
trace string. Change two of them to use different strings.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Once all the packets transmitted as part of a call have been acked, don't
permit any resending.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Parse the received packets before going and processing timeouts as the
timeouts may be reset by the reception of a packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Switch from keeping the transmission buffers in the rxrpc_txbuf struct and
allocated from the slab, to allocating them using page fragment allocators
(which uses raw pages), thereby allowing them to be passed to
MSG_SPLICE_PAGES and avoid copying into the UDP buffers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Use rxrpc_txbuf::kvec[0] instead of rxrpc_txbuf::wire to gain access to the
Rx protocol header. In future, the wire header will be stored in a page
frag, not in the rxrpc_txbuf struct making it possible to use
MSG_SPLICE_PAGES when sending it.
Similarly, access the ack header as being immediately after the wire header
when filling out an ACK packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Move rxrpc_send_ACK() to output.c to so that it is with
rxrpc_send_ack_packet() prior to merging the two.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Don't pick values out of the wire header in rxkad when setting up DATA
packet security, but rather use other sources. This makes it easier to get
rid of txb->wire.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Split (sub)packet preparation and timestamping out of the DATA packet
transmission function to make it easier to glue multiple txbufs together
into a jumbo DATA packet. This will require preparation and timestamping
of all the subpackets in a txbuf, and these functions provide convenient
points to place the required iteration.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Add a kvec[] to the rxrpc_txbuf struct to point to the contributory buffers
for a packet. Start with just a single element for now, but this will be
expanded later.
Make the ACK sending function use it, which means that rxrpc_fill_out_ack()
doesn't need to return the size of the sack table, padding and trailer.
Make the data sending code use it, both in where sendmsg() packages code up
into txbufs and where those txbufs are transmitted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Merge together the DF and non-DF branches of the transmission function and
always set the flag to the right thing before transmitting. If we see
-EMSGSIZE from udp_sendmsg(), turn off DF and retry.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Don't reset the DF flag after transmission, but rather set it when needed
since it should be a fast op now that we call IP directly.
This includes turning it off for RESPONSE packets and, for the moment, ACK
packets. In future, we will need to turn it on for ACK packets used to do
path MTU discovery.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
call->tx_transmitted and call->acks_prev_seq don't need to be managed with
cmpxchg() and barriers as it's only used within the singular I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Strip the atomic ops and barriering off of the call timer tracking as this
is handled solely within the I/O thread, except for expect_term_by which is
set by sendmsg().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
From AFS-3.3 a trailer containing extra info was added to the ACK packet
format - but AF_RXRPC has the names of some of the fields mixed up compared
to other AFS implementations.
Rename the struct and the fields to make them match.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Add a field to rxrpc_txbuf in which to store the checksum to go in the
header as this may get overwritten in the wire header struct when
transmitting as part of a jumbo packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Convert the transmission buffer flags into a mask and use | and & rather
than bitops functions (atomic ops are not required as only the I/O thread
can manipulate them once submitted for transmission).
The bottom byte can then correspond directly to the Rx protocol header
flags.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Each Rx protocol packet contains a per-connection monotonically increasing
serial number used to correlate outgoing messages with their replies -
something that can be used for RTT calculation.
Note this value in the rxrpc_txbuf struct in addition to the wire header
and then log it in the rxrpc_retransmit trace for reference.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Breno Leitao says:
====================
net: collect tstats automatically
The commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf") added a field in struct_netdevice, which tells what
type of statistics the driver supports.
That field is used primarily to allocate stats structures automatically,
but, it also could leveraged to simplify the drivers even further, such
as, if the driver relies in the default stats collection, then it
doesn't need to assign to .ndo_get_stats64. That means that drivers only
assign functions to .ndo_get_stats64 if they are using something
special.
I started to move some of these drivers[1][2][3] to use the core
allocation, and with this change in, I just need to touch the driver
once, and be able to simplify the whole stats allocation and collection
for generic case.
There are 44 devices today that could benefit from this simplification.
# grep -r .ndo_get_stats64 | grep dev_get_tstats64 | wc -l
44
As of today, netnext only has the `sit` driver fully ported to core
stats allocation, hence the second patch.
Links:
[1] https://lore.kernel.org/all/20240227182338.2739884-1-leitao@debian.org/
[2] https://lore.kernel.org/all/20240222144117.1370101-1-leitao@debian.org/
[3] https://lore.kernel.org/all/20240223115839.3572852-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240228113125.3473685-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the driver is using the network core allocation mechanism, by setting
NETDEV_PCPU_STAT_TSTATS, as this driver is, then, it doesn't need to set
the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Since
the network core calls it automatically, and .ndo_get_stats64 should
only be set if the driver needs special treatment.
This simplifies the driver, since all the generic statistics is now
handled by core.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the network driver is relying in the net core to do stats allocation,
then we want to dev_get_tstats64() instead of netdev_stats_to_stats64(),
since there are per-cpu stats that needs to be taken in consideration.
This will also simplify the drivers in regard to statistics. Once the
driver sets NETDEV_PCPU_STAT_TSTATS, it doesn't not need to allocate the
stacks, neither it needs to set `.ndo_get_stats64 = dev_get_tstats64`
for the generic stats collection function anymore.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is just a trivial fix for a typo in a comment, no functional
changes.
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240228112447.1490926-1-siyanteng@loongson.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The input parameter 'level' in do_raw_set/getsockopt() is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228072505.640550-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Robert Marko says:
====================
net: dsa: mv88e6xxx: add Amethyst specific SMI GPIO function
Amethyst family (MV88E6191X/6193X/6393X) has a simplified SMI GPIO setting
via the Scratch and Misc register so it requires family specific function.
In the v1 review, Andrew pointed out that it would make sense to rename the
existing mv88e6xxx_g2_scratch_gpio_set_smi as it only works on the MV6390
family.
Changes in v2:
* Add rename of mv88e6xxx_g2_scratch_gpio_set_smi to
mv88e6390_g2_scratch_gpio_set_smi
====================
Link: https://lore.kernel.org/r/20240227175457.2766628-1-robimarko@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The existing mv88e6390_g2_scratch_gpio_set_smi() cannot be used on the
88E6393X as it requires certain P0_MODE, it also checks the CPU mode
as it impacts the bit setting value.
This is all irrelevant for Amethyst (MV88E6191X/6193X/6393X) as only
the default value of the SMI_PHY Config bit is set to CPU_MGD bootstrap
pin value but it can be changed without restrictions so that GPIO pins
9 and 10 are used as SMI pins.
So, introduce Amethyst specific function and call that if the Amethyst
family wants to setup the external PHY.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The name mv88e6xxx_g2_scratch_gpio_set_smi is a bit ambiguous as it appears
to only be applicable to the 6390 family, so lets rename it to
mv88e6390_g2_scratch_gpio_set_smi to make it more obvious.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I missed that inet6_dump_addr() is calling in6_dump_addrs()
from two points.
First one under RTNL protection, and second one under rcu_read_lock().
Since we want to remove RTNL use from inet6_dump_addr() very soon,
no longer assume in6_dump_addrs() is protected by RTNL (even
if this is still the case).
Use rcu_read_lock() earlier to fix this lockdep splat:
WARNING: suspicious RCU usage
6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0 Not tainted
net/ipv6/addrconf.c:5317 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor.2/8834:
#0: ffff88802f554678 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x119/0x780 net/netlink/af_netlink.c:2338
#1: ffffffff8f377a88 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0x676/0xda0 net/netlink/af_netlink.c:2265
#2: ffff88807e5f0580 (&ndev->lock){++--}-{2:2}, at: in6_dump_addrs+0xb8/0x1de0 net/ipv6/addrconf.c:5279
stack backtrace:
CPU: 1 PID: 8834 Comm: syz-executor.2 Not tainted 6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
lockdep_rcu_suspicious+0x220/0x340 kernel/locking/lockdep.c:6712
in6_dump_addrs+0x1b47/0x1de0 net/ipv6/addrconf.c:5317
inet6_dump_addr+0x1597/0x1690 net/ipv6/addrconf.c:5428
netlink_dump+0x6a6/0xda0 net/netlink/af_netlink.c:2266
__netlink_dump_start+0x59d/0x780 net/netlink/af_netlink.c:2374
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_rcv_msg+0xcf7/0x10d0 net/core/rtnetlink.c:6555
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2547
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8e0/0xcb0 net/netlink/af_netlink.c:1902
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
Fixes: c3718936ec ("ipv6: anycast: complete RCU handling of struct ifacaddr6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227222259.4081489-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_defer_free_flush() is currently called from net_rx_action()
and napi_threaded_poll().
We should also call it from __napi_busy_loop() otherwise
there is the risk the percpu queue can grow until an IPI
is forced from skb_attempt_defer_free() adding a latency spike.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227210105.3815474-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By moving some fields around, this patch shrinks
holes size from 56 to 32, saving 24 bytes on 64bit arches.
After the patch pahole gives the following for 'struct tcp_sock':
/* size: 2304, cachelines: 36, members: 162 */
/* sum members: 2234, holes: 6, sum holes: 32 */
/* sum bitfield members: 34 bits, bit holes: 5, sum bit holes: 14 bits */
/* padding: 32 */
/* paddings: 3, sum paddings: 10 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 12 */
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227192721.3558982-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If br_multicast_init_stats() fails, there is no need to set lockdep
classes. Just return from the error path.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227182338.2739884-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the bridge driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227182338.2739884-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename some test cases to avoid overlapping test names which is
problematic for the kernel test robot. No changes in the test's logic.
Suggested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240227170418.491442-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 446fda4f26 ("[NetLabel]: CIPSOv4 engine"), *bitmap_walk
function only returns -1. Nearly 18 years have passed, -2 scenes never
come up, so there's no need to consider it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240227093604.3574241-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
inet: implement lockless RTM_GETNETCONF ops
This series removes RTNL use for RTM_GETNETCONF operations on AF_INET.
- Annotate data-races to avoid possible KCSAN splats.
- "ip -4 netconf show dev XXX" can be implemented without RTNL [1]
- "ip -4 netconf" dumps can be implemented using RCU instead of RTNL [1]
[1] This only refers to RTM_GETNETCONF operation, "ip" command
also uses RTM_GETLINK dumps which are using RTNL at this moment.
====================
Link: https://lore.kernel.org/r/20240227092411.2315725-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) inet_netconf_dump_devconf() can run under RCU protection
instead of RTNL.
2) properly return 0 at the end of a dump, avoiding an
an extra recvmsg() system call.
3) Do not use inet_base_seq() anymore, for_each_netdev_dump()
has nice properties. Restarting a GETDEVCONF dump if a device has
been added/removed or if net->ipv4.dev_addr_genid has changed is moot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"ip -4 netconf show dev XXXX" no longer acquires RTNL.
Return -ENODEV instead of -EINVAL if no netdev or idev can be found.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add READ_ONCE() in ipv4_devconf_get() and corresponding
WRITE_ONCE() in ipv4_devconf_set()
Add IPV4_DEVCONF_RO() and IPV4_DEVCONF_ALL_RO() macros,
and use them when reading devconf fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d1d77120bc ("net: phy: dp83826: support TX data voltage tuning")
introduced a regression in that WOL is not disabled by default for DP83826.
WOL should normally be enabled through ethtool.
Fixes: d1d77120bc ("net: phy: dp83826: support TX data voltage tuning")
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Link: https://lore.kernel.org/r/20240226162339.696461-1-catalin.popescu@leica-geosystems.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: stop using libmnl
There is no strong reason to stop using libmnl in ynl but there
are a few small ones which add up.
First (as I remembered immediately after hitting send on v1),
C++ compilers do not like the libmnl for_each macros.
I haven't tried it myself, but having all the code directly
in YNL makes it easier for folks porting to C++ to modify them
and/or make YNL more C++ friendly.
Second, we do much more advanced netlink level parsing in ynl
than libmnl so it's hard to say that libmnl abstracts much from us.
The fact that this series, removing the libmnl dependency, only
adds <300 LoC shows that code savings aren't huge.
OTOH when new types are added (e.g. auto-int) we need to add
compatibility to deal with older version of libmnl (in fact,
even tho patches have been sent months ago, auto-ints are still
not supported in libmnl.git).
Thrid, the dependency makes ynl less self contained, and harder
to vendor in. Whether vendoring libraries into projects is a good
idea is a separate discussion, nonetheless, people want to do it.
Fourth, there are small annoyances with the libmnl APIs which
are hard to fix in backward-compatible ways. See the last patch
for example.
All in all, libmnl is a great library, but with all the code
generation and structured parsing, ynl is better served by going
its own way.
v1: https://lore.kernel.org/all/20240222235614.180876-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20240227223032.1835527-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To stick to libmnl wrappers in the past we had to use poll()
to check if there are any outstanding notifications on the socket.
This is no longer necessary, we can use MSG_DONTWAIT.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-16-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most libmnl socket helpers can be replaced by direct calls to
the underlying libc API. We need portid, the netlink manpage
suggests we bind() address of zero.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-14-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing callbacks take struct ynl_parse_arg as the argument.
Make that official by using a local callback type instead of mnl_cb_t.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's only one set of callbacks in YNL, for netlink control
messages, and most of them are trivial. So implement the message
walking directly without depending on mnl_cb_run2().
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl_recv_ack() is simple and it's the only user of mnl_cb_run().
Now that ynl_sock_read_msgs() exists it's actually less code
to use ynl_sock_read_msgs() instead of being special.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells