- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=0iVF
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
This pull request contains the following branches:
rcu/torture: RCU torture, locktorture and generic torture infrastructure
updates that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
rcu/fixes: Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments.
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM.
* Object information is now dumped in case of invalid callback
invocation.
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed.
rcu/docs: RCU documentation updates
rcu/refscale: RCU reference scalability test minor fixes and doc
improvements.
rcu/tasks: RCU tasks minor fixes
rcu/stall: Stall detection updates. Introduce RCU CPU Stall notifiers
that allows a subsystem to provide informations to help debugging.
Also cure some false positive stalls.
-----BEGIN PGP SIGNATURE-----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=cVD7
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping symbols
- Minor cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9U5x
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Misc fixes and cleanups:
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping
symbols
- Minor cleanups"
* tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Skip over mapping symbols in output from readelf
scripts/faddr2line: Use LLVM addr2line and readelf if LLVM=1
scripts/faddr2line: Don't filter out non-function symbols from readelf
objtool: Remove max symbol name length limitation
objtool: Propagate early errors
objtool: Use 'the fallthrough' pseudo-keyword
x86/speculation, objtool: Use absolute relocations for annotations
x86/unwind/orc: Remove redundant initialization of 'mid' pointer in __orc_find()
- Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from the
multiplex syscall and adds a little room for extentions, while lifting
some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
- Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation.
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref code,
and by better interfacing the CMPXCHG8B assembly code with the compiler.
- Introduce arch_sync_try_cmpxchg() on x86 to improve sync_try_cmpxchg()
code generation. Convert some sync_cmpxchg() users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
- Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic but
was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify
the API-instantiation macros a bit.
- RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(), rtlock_lock()
and rwbase_read_lock().
- Plus misc fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=36Ff
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Info Molnar:
"Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from
the multiplex syscall and adds a little room for extentions, while
lifting some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref
code, and by better interfacing the CMPXCHG8B assembly code with
the compiler
- Introduce arch_sync_try_cmpxchg() on x86 to improve
sync_try_cmpxchg() code generation. Convert some sync_cmpxchg()
users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic
but was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check
semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify the
API-instantiation macros a bit
RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(),
rtlock_lock() and rwbase_read_lock()
.. plus misc fixes & cleanups"
* tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
futex: Don't include process MM in futex key on no-MMU
locking/seqlock: Fix grammar in comment
alpha: Fix up new futex syscall numbers
locking/seqlock: Propagate 'const' pointers within read-only methods, remove forced type casts
locking/lockdep: Fix string sizing bug that triggers a format-truncation compiler-warning
locking/seqlock: Change __seqprop() to return the function pointer
locking/seqlock: Simplify SEQCOUNT_LOCKNAME()
locking/atomics: Use atomic_try_cmpxchg_release() to micro-optimize rcuref_put_slowpath()
locking/atomic, xen: Use sync_try_cmpxchg() instead of sync_cmpxchg()
locking/atomic/x86: Introduce arch_sync_try_cmpxchg()
locking/atomic: Add generic support for sync_try_cmpxchg() and its fallback
locking/seqlock: Fix typo in comment
futex/requeue: Remove unnecessary ‘NULL’ initialization from futex_proxy_trylock_atomic()
locking/local, arch: Rewrite local_add_unless() as a static inline function
locking/debug: Fix debugfs API return value checks to use IS_ERR()
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
...
machinery and other, general cleanups to the hw mitigations code,
by Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=E7c4
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- A bunch of improvements, cleanups and fixlets to the SRSO mitigation
machinery and other, general cleanups to the hw mitigations code, by
Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
* tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/retpoline: Document some thunk handling aspects
x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN
x86/callthunks: Delete unused "struct thunk_desc"
x86/vdso: Run objtool on vdso32-setup.o
objtool: Fix return thunk patching in retpolines
x86/srso: Remove unnecessary semicolon
x86/pti: Fix kernel warnings for pti= and nopti cmdline options
x86/calldepth: Rename __x86_return_skl() to call_depth_return_thunk()
x86/nospec: Refactor UNTRAIN_RET[_*]
x86/rethunk: Use SYM_CODE_START[_LOCAL]_NOALIGN macros
x86/srso: Disentangle rethunk-dependent options
x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block
x86/bugs: Remove default case for fully switched enums
x86/srso: Remove 'pred_cmd' label
x86/srso: Unexport untraining functions
x86/srso: Improve i-cache locality for alias mitigation
x86/srso: Fix unret validation dependencies
x86/srso: Fix vulnerability reporting for missing microcode
x86/srso: Print mitigation for retbleed IBPB case
x86/srso: Print actual mitigation if requested mitigation isn't possible
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppWAAKCRCRxhvAZXjc
okB2AP4jjoRErJBwj245OIDJqzoj4m4UVOVd0MH2AkiSpANczwD/TToChdpusY2y
qAYg1fQoGMbDVlb7Txaj9qI9ieCf9w0=
=2PXg
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"The 's_xattr' field of 'struct super_block' currently requires a
mutable table of 'struct xattr_handler' entries (although each handler
itself is const). However, no code in vfs actually modifies the
tables.
This changes the type of 's_xattr' to allow const tables, and modifies
existing file systems to move their tables to .rodata. This is
desirable because these tables contain entries with function pointers
in them; moving them to .rodata makes it considerably less likely to
be modified accidentally or maliciously at runtime"
* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
const_structs.checkpatch: add xattr_handler
net: move sockfs_xattr_handlers to .rodata
shmem: move shmem_xattr_handlers to .rodata
overlayfs: move xattr tables to .rodata
xfs: move xfs_xattr_handlers to .rodata
ubifs: move ubifs_xattr_handlers to .rodata
squashfs: move squashfs_xattr_handlers to .rodata
smb: move cifs_xattr_handlers to .rodata
reiserfs: move reiserfs_xattr_handlers to .rodata
orangefs: move orangefs_xattr_handlers to .rodata
ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
ntfs3: move ntfs_xattr_handlers to .rodata
nfs: move nfs4_xattr_handlers to .rodata
kernfs: move kernfs_xattr_handlers to .rodata
jfs: move jfs_xattr_handlers to .rodata
jffs2: move jffs2_xattr_handlers to .rodata
hfsplus: move hfsplus_xattr_handlers to .rodata
hfs: move hfs_xattr_handlers to .rodata
gfs2: move gfs2_xattr_handlers_max to .rodata
fuse: move fuse_xattr_handlers to .rodata
...
Swarup reported a "make htmldocs" warning:
Variable length lookbehind is experimental in regex;
marked by <-- HERE in m/(?<=^|\s)-Werror(?=$|\s)
<-- HERE / at ./scripts/kernel-doc line 188.
Akira managed to reproduce it by perl v5.34.0.
On second thought, it is not necessary to have the complicated
"lookahead and lookbehind" things, and the regex can be simplified.
Generally, the kernel-doc warnings should be considered as errors only
when "-Werror" flag is set in KCFLAGS, but not when
"-Werror=<diagnostic-type>" is set, which means there needs to be a
space or start of string before "-Werror", and a space or end of string
after "-Werror".
The following cases have been tested to work as expected:
* kernel-doc warnings are considered as errors:
$ KCFLAGS="-Werror" make W=1
$ KCFLAGS="-Wcomment -Werror" make W=1
$ KCFLAGS="-Werror -Wundef" make W=1
$ KCFLAGS="-Wcomment -Werror -Wundef" make W=1
* kernel-doc warnings remain as warnings:
$ KCFLAGS="-Werror=return-type" make W=1
$ KCFLAGS="-Wcomment -Werror=return-type" make W=1
$ KCFLAGS="-Werror=return-type -Wundef" make W=1
$ KCFLAGS="-Wcomment -Werror=return-type -Wundef" make W=1
The "Variable length lookbehind is experimental in regex" warning is
also resolved by this patch.
Fixes: 91f950e8b9 ("scripts/kernel-doc: match -Werror flag strictly")
Reported-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/20231028182231.123996-1-swarupkotikalapudi@gmail.com/
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231030085404.3343403-1-yujie.liu@intel.com
ALL_INIT_TEXT_SECTIONS and ALL_EXIT_TEXT_SECTIONS are only used in
the macro definition of ALL_TEXT_SECTIONS.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ALL_INIT_SECTIONS is defined as follows:
#define ALL_INIT_SECTIONS INIT_SECTIONS, ALL_XXXINIT_SECTIONS
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Theoretically, we could export conditionally-discarded code sections,
such as .meminit*, if all the users can become modular under a certain
condition. However, that would be difficult to control and such a tricky
case has never occurred.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These symbol patterns were whitelisted to allow them to reference to
functions with the old __devinit and __devexit annotations.
We stopped doing this a long time ago, for example, commit 6f03979051
("Drivers: scsi: remove __dev* attributes.") remove those annotations
from the scsi drivers.
Keep *_ops, *_probe, and *_console, otherwise they will really cause
section mismatch warnings.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Drivers must not reference .meminit* sections, which are discarded
when CONFIG_MEMORY_HOTPLUG=n.
The reason for whitelisting "*driver" in the section mismatch check
was to allow drivers to reference symbols annotated as __devinit or
__devexit that existed in the past.
Those annotations were removed by the following commits:
- 54b956b903 ("Remove __dev* markings from init.h")
- 92e9e6d1f9 ("modpost.c: Stop checking __dev* section mismatches")
Remove the stale whitelist.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We have never used __memexit, __memexitdata, or __memexitconst.
These were unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
scripts/pahole-flags.sh is executed so many times.
You can confirm it, as follows:
$ cat <<EOF >> scripts/pahole-flags.sh
> echo "scripts/pahole-flags.sh was executed" >&2
> EOF
$ make -s
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
[ lots of repeated lines... ]
This scripts is executed more than 20 times during the kernel build
because PAHOLE_FLAGS is a recursively expanded variable and exported
to sub-processes.
With GNU Make >= 4.4, it is executed more than 60 times because
exported variables are also passed to other $(shell ) invocations.
Without careful coding, it is known to cause an exponential fork
explosion. [1]
The use of $(shell ) in an exported recursive variable is likely wrong
because $(shell ) is always evaluated due to the 'export' keyword, and
the evaluation can occur multiple times by the nature of recursive
variables.
Convert the shell script to a Makefile, which is included only when
CONFIG_DEBUG_INFO_BTF=y.
[1]: https://savannah.gnu.org/bugs/index.php?64746
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
The '%.ko' rule in arch/*/Makefile.postlink does nothing but call the
'true' command.
Remove the unneeded code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Currently, there is no standard implementation for vdso_install,
leading to various issues:
1. Code duplication
Many architectures duplicate similar code just for copying files
to the install destination.
Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.
2. Unintended updates of in-tree build artifacts
The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665 ("arm, kbuild: make
"make install" not depend on vmlinux").
3. Broken code in some architectures
Makefile code is often copied from one architecture to another
without proper adaptation.
'make vdso_install' for parisc does not work.
'make vdso_install' for s390 installs vdso64, but not vdso32.
To address these problems, this commit introduces a generic vdso_install
rule.
Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.
For example, arch/x86/Makefile looks like this:
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.
vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.
The following is a snippet from arch/arm64/Makefile.
vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
CDX controller provides subsystem vendor, subsystem device, class and
revision info of the device along with vendor and device ID in native
endian format. CDX Bus system uses this information to bind the cdx
device to the cdx device driver.
Co-developed-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-8-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel-internal prototypes, references to current_thread_info()
and code hidden behind a CONFIG_HEXAGON_ARCH_VERSION switch are
certainly not usable in userspace, so this should not reside
in a uapi header. Move the code into an internal version of
ptrace.h instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mapping symbols emitted in the readelf output can confuse the
'faddr2line' symbol size calculation, resulting in the erroneous
rejection of valid offsets. This is especially prevalent when building
an arm64 kernel with CONFIG_CFI_CLANG=y, where most functions are
prefixed with a 32-bit data value in a '$d.n' section. For example:
447538: ffff800080014b80 548 FUNC GLOBAL DEFAULT 2 do_one_initcall
104: ffff800080014c74 0 NOTYPE LOCAL DEFAULT 2 $x.73
106: ffff800080014d30 0 NOTYPE LOCAL DEFAULT 2 $x.75
111: ffff800080014da4 0 NOTYPE LOCAL DEFAULT 2 $d.78
112: ffff800080014da8 0 NOTYPE LOCAL DEFAULT 2 $x.79
36: ffff800080014de0 200 FUNC LOCAL DEFAULT 2 run_init_process
Adding a warning to do_one_initcall() results in:
| WARNING: CPU: 0 PID: 1 at init/main.c:1236 do_one_initcall+0xf4/0x260
Which 'faddr2line' refuses to accept:
$ ./scripts/faddr2line vmlinux do_one_initcall+0xf4/0x260
skipping do_one_initcall address at 0xffff800080014c74 due to size mismatch (0x260 != 0x224)
no match for do_one_initcall+0xf4/0x260
Filter out these entries from readelf using a shell reimplementation of
is_mapping_symbol(), so that the size of a symbol is calculated as a
delta to the next symbol present in ksymtab.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231002165750.1661-4-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
GNU utilities cannot necessarily parse objects built by LLVM, which can
result in confusing errors when using 'faddr2line':
$ CROSS_COMPILE=aarch64-linux-gnu- ./scripts/faddr2line vmlinux do_one_initcall+0xf4/0x260
aarch64-linux-gnu-addr2line: vmlinux: unknown type [0x13] section `.relr.dyn'
aarch64-linux-gnu-addr2line: DWARF error: invalid or unhandled FORM value: 0x25
do_one_initcall+0xf4/0x260:
aarch64-linux-gnu-addr2line: vmlinux: unknown type [0x13] section `.relr.dyn'
aarch64-linux-gnu-addr2line: DWARF error: invalid or unhandled FORM value: 0x25
$x.73 at main.c:?
Although this can be worked around by setting CROSS_COMPILE to "llvm=-",
it's cleaner to follow the same syntax as the top-level Makefile and
accept LLVM= as an indication to use the llvm- tools, optionally
specifying their location or specific version number.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231002165750.1661-3-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
As Josh points out in 20230724234734.zy67gm674vl3p3wv@treble:
> Problem is, I think the kernel's symbol printing code prints the
> nearest kallsyms symbol, and there are some valid non-FUNC code
> symbols. For example, syscall_return_via_sysret.
so we shouldn't be considering only 'FUNC'-type symbols in the output
from readelf.
Drop the function symbol type filtering from the faddr2line outer loop.
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230724234734.zy67gm674vl3p3wv@treble
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231002165750.1661-2-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
In our CI testing, we use some commands as below to only turn a specific
type of warnings into errors, but we notice that kernel-doc warnings
are also turned into errors unexpectedly.
$ make KCFLAGS="-Werror=return-type" W=1 kernel/fork.o
kernel/fork.c:1406: warning: Function parameter or member 'mm' not described in 'set_mm_exe_file'
kernel/fork.c:1406: warning: Function parameter or member 'new_exe_file' not described in 'set_mm_exe_file'
kernel/fork.c:1441: warning: Function parameter or member 'mm' not described in 'replace_mm_exe_file'
kernel/fork.c:1441: warning: Function parameter or member 'new_exe_file' not described in 'replace_mm_exe_file'
kernel/fork.c:1491: warning: Function parameter or member 'mm' not described in 'get_mm_exe_file'
kernel/fork.c:1510: warning: Function parameter or member 'task' not described in 'get_task_exe_file'
kernel/fork.c:1534: warning: Function parameter or member 'task' not described in 'get_task_mm'
kernel/fork.c:2109: warning: bad line:
kernel/fork.c:2130: warning: Function parameter or member 'ret' not described in '__pidfd_prepare'
kernel/fork.c:2130: warning: Excess function parameter 'pidfd' description in '__pidfd_prepare'
kernel/fork.c:2179: warning: Function parameter or member 'ret' not described in 'pidfd_prepare'
kernel/fork.c:2179: warning: Excess function parameter 'pidfd' description in 'pidfd_prepare'
kernel/fork.c:3195: warning: expecting prototype for clone3(). Prototype was for sys_clone3() instead
13 warnings as Errors
make[3]: *** [scripts/Makefile.build:243: kernel/fork.o] Error 13
make[3]: *** Deleting file 'kernel/fork.o'
make[2]: *** [scripts/Makefile.build:480: kernel] Error 2
make[1]: *** [/root/linux/Makefile:1913: .] Error 2
make: *** [Makefile:234: __sub-make] Error 2
>From the git history, commit 2c12c8103d ("scripts/kernel-doc:
optionally treat warnings as errors") introduces a new command-line
option to make kernel-doc warnings into errors. It can also read the
KCFLAGS environment variable to decide whether to turn this option on,
but the regex used for matching may not be accurate enough. It can match
both "-Werror" and "-Werror=<diagnostic-type>", so the option is turned
on by mistake in the latter case.
Fix this by strictly matching the flag "-Werror": there must be a space
or start of string in the front, and a space or end of string at the
end. This can handle all the following cases correctly:
KCFLAGS="-Werror" make W=1 [MATCH]
KCFLAGS="-Werror=return-type" make W=1 [NO MATCH]
KCFLAGS="-Wcomment -Werror -Wundef" make W=1 [MATCH]
KCFLAGS="-Wcomment -Werror=return-type -Wundef" make W=1 [NO MATCH]
Fixes: 2c12c8103d ("scripts/kernel-doc: optionally treat warnings as errors")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20231019095637.2471840-1-yujie.liu@intel.com>
VC04 has now a independent bus vchiq_bus to register its devices.
However, the module auto-loading for bcm2835-audio and bcm2835-camera
currently happens through MODULE_ALIAS() macro specified explicitly.
The correct way to auto-load a module, is when the alias is picked
out from MODULE_DEVICE_TABLE(). In order to get there, we need to
introduce vchiq_device_id and add relevant entries in file2alias.c
infrastructure so that aliases can be generated. This patch targets
adding vchiq_device_id and do_vchiq_entry, in order to
generate those alias using the /script/mod/file2alias.c.
Going forward the MODULE_ALIAS() from bcm2835-camera and bcm2835-audio
will be dropped, in favour of MODULE_DEVICE_TABLE being used there.
The alias format for vchiq_bus devices will be "vchiq:<dev_name>".
Adjust the vchiq_bus_uevent() to reflect that.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20231019090128.430297-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enabling CONFIG_KCSAN leads to unconverted, default return thunks to
remain after patching.
As David Kaplan describes in his debugging of the issue, it is caused by
a couple of KCSAN-generated constructors which aren't processed by
objtool:
"When KCSAN is enabled, GCC generates lots of constructor functions
named _sub_I_00099_0 which call __tsan_init and then return. The
returns in these are generally annotated normally by objtool and fixed
up at runtime. But objtool runs on vmlinux.o and vmlinux.o does not
include a couple of object files that are in vmlinux, like
init/version-timestamp.o and .vmlinux.export.o, both of which contain
_sub_I_00099_0 functions. As a result, the returns in these functions
are not annotated, and the panic occurs when we call one of them in
do_ctors and it uses the default return thunk.
This difference can be seen by counting the number of these functions in the object files:
$ objdump -d vmlinux.o|grep -c "<_sub_I_00099_0>:"
2601
$ objdump -d vmlinux|grep -c "<_sub_I_00099_0>:"
2603
If these functions are only run during kernel boot, there is no
speculation concern."
Fix it by disabling KCSAN on version-timestamp.o and .vmlinux.export.o
so the extra functions don't get generated. KASAN and GCOV are already
disabled for those files.
[ bp: Massage commit message. ]
Closes: https://lore.kernel.org/lkml/20231016214810.GA3942238@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231017165946.v4i2d4exyqwqq3bx@treble
CONFIG_CPU_SRSO isn't dependent on CONFIG_CPU_UNRET_ENTRY (AMD
Retbleed), so the two features are independently configurable. Fix
several issues for the (presumably rare) case where CONFIG_CPU_SRSO is
enabled but CONFIG_CPU_UNRET_ENTRY isn't.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/299fb7740174d0f2335e91c58af0e9c242b4bac1.1693889988.git.jpoimboe@kernel.org
When doing Python programming it is a nice convention to insert the if
statement `if __name__ == "__main__":` before any main code that does
actual functionalities to ensure the code will be executed only as a
script rather than as an imported module. Hence attach the missing
judgement to show_delta.
Link: https://lkml.kernel.org/r/20231013132832.165768-1-2023002089@link.tyut.edu.cn
Signed-off-by: Hu Haowen <2023002089@link.tyut.edu.cn>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There were some recent attempts [1] [2] to make the K: field less noisy
and its behavior more obvious. Ultimately, a shift in the default
behavior and an associated command line flag is the best choice.
Currently, K: will match keywords found in both patches and files.
Matching content from entire files is (while documented) not obvious
behavior and is usually not wanted by maintainers.
Now only patch content will be matched against unless --keywords-in-file
is also provided as an argument to get_maintainer.
Add the actual keyword matched to the role or rolestats as well.
For instance given the diff below that removes clang:
: diff --git a/drivers/hid/bpf/entrypoints/README b/drivers/hid/bpf/entrypoints/README
: index 147e0d41509f..f88eb19e8ef2 100644
: --- a/drivers/hid/bpf/entrypoints/README
: +++ b/drivers/hid/bpf/entrypoints/README
: @@ -1,4 +1,4 @@
: WARNING:
: If you change "entrypoints.bpf.c" do "make -j" in this directory to rebuild "entrypoints.skel.h".
: -Make sure to have clang 10 installed.
: +Make sure to have 10 installed.
: See Documentation/bpf/bpf_devel_QA.rst
The new role/rolestats output includes ":Keyword:\b(?i:clang|llvm)\b"
$ git diff drivers/hid/bpf/entrypoints/README | .scripts/get_maintainer.pl
Jiri Kosina <jikos@kernel.org> (maintainer:HID CORE LAYER,commit_signer:1/1=100%)
Benjamin Tissoires <benjamin.tissoires@redhat.com> (maintainer:HID CORE LAYER,commit_signer:1/1=100%,authored:1/1=100%,added_lines:4/4=100%)
Nathan Chancellor <nathan@kernel.org> (supporter:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Nick Desaulniers <ndesaulniers@google.com> (supporter:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Tom Rix <trix@redhat.com> (reviewer:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (commit_signer:1/1=100%)
linux-input@vger.kernel.org (open list:HID CORE LAYER)
linux-kernel@vger.kernel.org (open list)
llvm@lists.linux.dev (open list:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Link: https://lore.kernel.org/r/20231004-get_maintainer_change_k-v1-1-ac7ced18306a@google.com
Link: https://lore.kernel.org/all/20230928-get_maintainer_add_d-v2-0-8acb3f394571@google.com
Link: https://lore.kernel.org/all/3dca40b677dd2fef979a5a581a2db91df2c21801.camel@perches.com
Original-patch-by: Justin Stitt <justinstitt@google.com>
Link: https://lkml.kernel.org/r/01fe46f0c58aa8baf92156ae2bdccfb2bf0cb48e.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The first few lines of section_rel() and section_rela() are the same.
They both retrieve the index of the section to which the relocaton
applies, and skip known-good sections. This common code should be moved
to check_sec_ref().
Avoid ugly casts when computing 'start' and 'stop', and also make the
Elf_Rel and Elf_Rela pointers const.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
We can replace &elf->sechdrs[i] with &sechdrs[i] to slightly shorten
the code because we already have the local variable 'sechdrs'.
However, defining 'sechdr' instead shortens the code further.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The current TO_NATIVE() has some limitations:
1) You cannot cast the argument.
2) You cannot pass a variable marked as 'const'.
3) Passing an array is a bug, but it is not detected.
Impelement TO_NATIVE() using bswap_*() functions. These are GNU
extensions. If we face portability issues, we can port the code from
include/uapi/linux/swab.h.
With this change, get_rel_type_and_sym() can be simplified by casting
the arguments directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d10 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
The generation of the kernel-devel package is disabled for binrpm-pkg
presumably because it was quite big (>= 200MB) and took a long time to
package.
Commit fe66b5d2ae ("kbuild: refactor kernel-devel RPM package and
linux-headers Deb package") reduced the package size to 12MB, and now
it is quick to build. It won't hurt to have binrpm-pkg generate it by
default.
If you want to skip the kernel-devel package generation, you can pass
RPMOPTS='--without devel':
$ make binrpm-pkg RPMOPTS='--without devel'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
This is the next upgrade to the Rust toolchain, from 1.72.1 to 1.73.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Required changes
For the upgrade, the following changes are required:
- Allow `internal_features` for `feature(compiler_builtins)` since
now Rust warns about using internal compiler and standard library
features (similar to how it also warns about incomplete ones) [4].
- A cleanup for a documentation link thanks to a new `rustdoc` lint.
See previous commits for details.
- A need to make an intra-doc link to a macro explicit, due to a
change in behavior in `rustdoc`. See previous commits for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1730-2023-10-05 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/compiler-team/issues/596 [4]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231005210556.466856-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, rustc defaults to invoking `cc`, even if `HOSTCC` is defined,
resulting in build failures in hermetic environments where `cc` does not
exist. This includes both hostprogs and proc-macros.
Since we are setting the linker to `HOSTCC`, we set the linker flavor to
`gcc` explicitly. The linker-flavor selects both which linker to search
for if the linker is unset, and which kind of linker flags to pass.
Without this flag, `rustc` would attempt to determine which flags to
pass based on the name of the binary passed as `HOSTCC`. `gcc` is the
name of the linker-flavor used by `rustc` for all C compilers, including
both `gcc` and `clang`.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add a -checks argument to allow the checks passed to the clang-tool to
be set on the command line.
Add a pass through -header-filter option.
Don't run analysis on non-C or CPP files.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Make the output more stable and deterministic.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Builds in tools still use the cmd_ prefix in .cmd files, so don't
require the saved part. Name the groups in the line pattern match so
that changing the regular expression is more robust and works with the
addition of a new match group.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Provide the generic sync_try_cmpxchg() function from the
raw_ prefixed version, also adding explicit instrumentation.
The patch amends existing scripts to generate sync_try_cmpxchg()
locking primitive and its raw_sync_try_cmpxchg() fallback, while
leaving existing macros from the try_cmpxchg() family unchanged.
The target can define its own arch_sync_try_cmpxchg() to override the
generic version of raw_sync_try_cmpxchg(). This allows the target
to generate more optimal assembly than the generic version.
Additionally, the patch renames two scripts to better reflect
whet they really do.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
This is the third upgrade to the Rust toolchain, from 1.71.1 to 1.72.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Other improvements
Previously, the compiler could incorrectly generate a `.eh_frame`
section under `-Cpanic=abort`. We were hitting this bug when debug
assertions were enabled (`CONFIG_RUST_DEBUG_ASSERTIONS=y`) [4]:
LD .tmp_vmlinux.kallsyms1
ld.lld: error: <internal>:(.eh_frame) is being placed in '.eh_frame'
Gary fixed the issue in Rust 1.72.0 [5].
# Required changes
For the upgrade, the following changes are required:
- A call to `Box::from_raw` in `rust/kernel/sync/arc.rs` now requires
an explicit `drop()` call. See previous patch for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1721-2023-09-19 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1012 [4]
Link: https://github.com/rust-lang/rust/pull/112403 [5]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20230823160244.188033-3-ojeda@kernel.org
[ Used 1.72.1 instead of .0 (no changes in `alloc`) and reworded
to mention that we hit the `.eh_frame` bug under debug assertions. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
kernel.spec is the last piece that resides outside the rpmbuild/
directory. Move all the RPM-related files to rpmbuild/ consistently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Modify modpost to use binary search for converting addresses back
into symbol references. Previously it used linear search.
This change saves a few seconds of wall time for defconfig builds,
but can save several minutes on allyesconfigs.
Before:
$ make LLVM=1 -j128 allyesconfig vmlinux -s KCFLAGS="-Wno-error"
$ time scripts/mod/modpost -M -m -a -N -o vmlinux.symvers vmlinux.o
198.38user 1.27system 3:19.71elapsed
After:
$ make LLVM=1 -j128 allyesconfig vmlinux -s KCFLAGS="-Wno-error"
$ time scripts/mod/modpost -M -m -a -N -o vmlinux.symvers vmlinux.o
11.91user 0.85system 0:12.78elapsed
Signed-off-by: Jack Brennen <jbrennen@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit d8131c2965 ("kbuild: remove $(MODLIB)/source symlink"),
modules_install does not create the 'source' symlink.
Remove the stale code from builddeb and kernel.spec.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Drivers must not reference functions marked with __exit as these likely
are not available when the code is built-in.
There are few creative offenders uncovered for example in ARCH=amd64
allmodconfig builds. So only trigger the section mismatch warning for
W=1 builds.
The dual rule that drivers must not reference .init.* is implemented
since commit 0db2524523 ("modpost: don't allow *driver to reference
.init.*") which however missed that .exit.* should be handled in the
same way.
Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to
find this improvement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.
Tested with allmodconfig before/after patch; no changes to *.mod.c:
git checkout v6.6-rc3
make -j$(nproc) allmodconfig
make -j$(nproc) olddefconfig
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/before
# apply patch
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/after
diff -r /tmp/before/ /tmp/after/
# no difference
Fixes: acbef7b766 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The main challenge with defining `work_struct` fields is making sure
that the function pointer stored in the `work_struct` is appropriate for
the work item type it is embedded in. It needs to know the offset of the
`work_struct` field being used (even if there are several!) so that it
can do a `container_of`, and it needs to know the type of the work item
so that it can call into the right user-provided code. All of this needs
to happen in a way that provides a safe API to the user, so that users
of the workqueue cannot mix up the function pointers.
There are three important pieces that are relevant when doing this:
* The pointer type.
* The work item struct. This is what the pointer points at.
* The `work_struct` field. This is a field of the work item struct.
This patch introduces a separate trait for each piece. The pointer type
is given a `WorkItemPointer` trait, which pointer types need to
implement to be usable with the workqueue. This trait will be
implemented for `Arc` and `Box` in a later patch in this patchset.
Implementing this trait is unsafe because this is where the
`container_of` operation happens, but user-code will not need to
implement it themselves.
The work item struct should then implement the `WorkItem` trait. This
trait is where user-code specifies what they want to happen when a work
item is executed. It also specifies what the correct pointer type is.
Finally, to make the work item struct know the offset of its
`work_struct` field, we use a trait called `HasWork<T, ID>`. If a type
implements this trait, then the type declares that, at the given offset,
there is a field of type `Work<T, ID>`. The trait is marked unsafe
because the OFFSET constant must be correct, but we provide an
`impl_has_work!` macro that can safely implement `HasWork<T>` on a type.
The macro expands to something that only compiles if the specified field
really has the type `Work<T>`. It is used like this:
```
struct MyWorkItem {
work_field: Work<MyWorkItem, 1>,
}
impl_has_work! {
impl HasWork<MyWorkItem, 1> for MyWorkItem { self.work_field }
}
```
Note that since the `Work` type is annotated with an id, you can have
several `work_struct` fields by using a different id for each one.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Kmod is now (since kmod commit 09c9f8c5df04 ("libkmod: Use kernel
decompression when available")) using the kernel decompressor, when
loading compressed modules.
However, the kernel XZ decompressor is XZ Embedded, which doesn't
handle CRC64 and dictionaries larger than 1MiB.
Use CRC32 and 1MiB dictionary when XZ compressing and installing
kernel modules.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1050582
Signed-off-by: Martin Nybo Andersen <tweek@tweek.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZQ8hRwAKCRDdBJ7gKXxA
jlK9AQDzT/FUQV3kIshsV1IwAKFcg7gtcFSN0vs+pV+e1+4tbQD/Z2OgfGFFsCSP
X6uc2cYHc9DG5/o44iFgadW8byMssQs=
=w+St
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
Add a new flag, '--driver-match', to the dt-extract-compatibles script
that causes it to only print out compatibles that are expected to match
a driver. This output can then be used by tests to detect device probe
failures.
In order to filter the compatibles down to only ones that will match to
a driver, the following is considered:
- A compatible needs to show up in a driver's of_match_table for it to
be matched to a driver
- Compatibles that are used in both of_match_table and OF_DECLARE type
macros can't be expected to match to a driver and so are ignored.
One exception is CLK_OF_DECLARE_DRIVER, since it indicates that a
driver will also later probe, so compatibles in this macro are not
ignored.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-3-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit:
9257959a6e ("locking/atomic: scripts: restructure fallback ifdeffery")
The ordering fallbacks for atomic*_read_acquire() and
atomic*_set_release() erroneously fall back to the implictly relaxed
atomic*_read() and atomic*_set() variants respectively, without any
additional barriers. This loses the ACQUIRE and RELEASE ordering
semantics, which can result in a wide variety of problems, even on
strongly-ordered architectures where the implementation of
atomic*_read() and/or atomic*_set() allows the compiler to reorder those
relative to other accesses.
In practice this has been observed to break bit spinlocks on arm64,
resulting in dentry cache corruption.
The fallback logic was intended to allow ACQUIRE/RELEASE/RELAXED ops to
be defined in terms of FULL ops, but where an op had RELAXED ordering by
default, this unintentionally permitted the ACQUIRE/RELEASE ops to be
defined in terms of the implicitly RELAXED default.
This patch corrects the logic to avoid falling back to implicitly
RELAXED ops, resulting in the same behaviour as prior to commit
9257959a6e.
I've verified the resulting assembly on arm64 by generating outlined
wrappers of the atomics. Prior to this patch the compiler generates
sequences using relaxed load (LDR) and store (STR) instructions, e.g.
| <outlined_atomic64_read_acquire>:
| ldr x0, [x0]
| ret
|
| <outlined_atomic64_set_release>:
| str x1, [x0]
| ret
With this patch applied the compiler generates sequences using the
intended load-acquire (LDAR) and store-release (STLR) instructions, e.g.
| <outlined_atomic64_read_acquire>:
| ldar x0, [x0]
| ret
|
| <outlined_atomic64_set_release>:
| stlr x1, [x0]
| ret
To make sure that there were no other victims of the ifdeffery rewrite,
I generated outlined copies of all of the {atomic,atomic64,atomic_long}
atomic operations before and after commit 9257959a6e. A diff of
the generated assembly on arm64 shows that only the read_acquire() and
set_release() operations were changed, and only lost their intended
ordering:
| [mark@lakrids:~/src/linux]% diff -u \
| <(aarch64-linux-gnu-objdump -d before-9257959a6e5b4fca.o)
| <(aarch64-linux-gnu-objdump -d after-9257959a6e5b4fca.o)
| --- /proc/self/fd/11 2023-09-19 16:51:51.114779415 +0100
| +++ /proc/self/fd/16 2023-09-19 16:51:51.114779415 +0100
| @@ -1,5 +1,5 @@
|
| -before-9257959a6e5b4fca.o: file format elf64-littleaarch64
| +after-9257959a6e5b4fca.o: file format elf64-littleaarch64
|
|
| Disassembly of section .text:
| @@ -9,7 +9,7 @@
| 4: d65f03c0 ret
|
| 0000000000000008 <outlined_atomic_read_acquire>:
| - 8: 88dffc00 ldar w0, [x0]
| + 8: b9400000 ldr w0, [x0]
| c: d65f03c0 ret
|
| 0000000000000010 <outlined_atomic_set>:
| @@ -17,7 +17,7 @@
| 14: d65f03c0 ret
|
| 0000000000000018 <outlined_atomic_set_release>:
| - 18: 889ffc01 stlr w1, [x0]
| + 18: b9000001 str w1, [x0]
| 1c: d65f03c0 ret
|
| 0000000000000020 <outlined_atomic_add>:
| @@ -1230,7 +1230,7 @@
| 1070: d65f03c0 ret
|
| 0000000000001074 <outlined_atomic64_read_acquire>:
| - 1074: c8dffc00 ldar x0, [x0]
| + 1074: f9400000 ldr x0, [x0]
| 1078: d65f03c0 ret
|
| 000000000000107c <outlined_atomic64_set>:
| @@ -1238,7 +1238,7 @@
| 1080: d65f03c0 ret
|
| 0000000000001084 <outlined_atomic64_set_release>:
| - 1084: c89ffc01 stlr x1, [x0]
| + 1084: f9000001 str x1, [x0]
| 1088: d65f03c0 ret
|
| 000000000000108c <outlined_atomic64_add>:
| @@ -2427,7 +2427,7 @@
| 207c: d65f03c0 ret
|
| 0000000000002080 <outlined_atomic_long_read_acquire>:
| - 2080: c8dffc00 ldar x0, [x0]
| + 2080: f9400000 ldr x0, [x0]
| 2084: d65f03c0 ret
|
| 0000000000002088 <outlined_atomic_long_set>:
| @@ -2435,7 +2435,7 @@
| 208c: d65f03c0 ret
|
| 0000000000002090 <outlined_atomic_long_set_release>:
| - 2090: c89ffc01 stlr x1, [x0]
| + 2090: f9000001 str x1, [x0]
| 2094: d65f03c0 ret
|
| 0000000000002098 <outlined_atomic_long_add>:
I've build tested this with a variety of configs for alpha, arm, arm64,
csky, i386, m68k, microblaze, mips, nios2, openrisc, powerpc, riscv,
s390, sh, sparc, x86_64, and xtensa, for which I've seen no issues. I
was unable to build test for ia64 and parisc due to existing build
breakage in v6.6-rc2.
Fixes: 9257959a6e ("locking/atomic: scripts: restructure fallback ifdeffery")
Reported-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Baokun Li <libaokun1@huawei.com>
Link: https://lkml.kernel.org/r/20230919171430.2697727-1-mark.rutland@arm.com
Revert 11f956538c ("scripts/gdb/symbols: add specific ko module load
command") due to breakage identified by Johannes Berg in [1].
Fixes: 11f956538c ("scripts/gdb/symbols: add specific ko module load command")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Closes: https://lkml.kernel.org/r/c44b748307a074d0c250002cdcfe209b8cce93c9.camel@sipsolutions.net [1]
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
-----BEGIN PGP SIGNATURE-----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=2LRy
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid long argument lists in make modules_install
kbuild: fix kernel-devel RPM package and linux-headers Deb package
Running "make modules_install" may fail with
make[2]: execvp: /bin/sh: Argument list too long
if many modules are built and INSTALL_MOD_PATH is long. This is because
scripts/Makefile.modinst creates all directories with one mkdir command.
Use $(foreach ...) instead to prevent an excessive argument list.
Fixes: 2dfec887c0 ("kbuild: reduce the number of mkdir calls during modules_install")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit fe66b5d2ae ("kbuild: refactor kernel-devel RPM package
and linux-headers Deb package"), the kernel-devel RPM package and
linux-headers Deb package are broken.
I double-quoted the $(find ... -type d), which resulted in newlines
being included in the argument to the outer find comment.
find: 'arch/arm64/include\narch/arm64/kvm/hyp/include': No such file or directory
The outer find command is unneeded.
Fixes: fe66b5d2ae ("kbuild: refactor kernel-devel RPM package and linux-headers Deb package")
Reported-by: Karolis M <k4rolis@protonmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
The definition for single-argument kfree_rcu() has been removed,
so that any further attempt to use it will result in a build error.
Because of this build error, there is no longer any need for a special
check in checkpatch.pl.
Therefore, revert commit 1eacac3255.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
* fix reference to exported symbols for parisc64 [Masahiro Yamada]
* Block-TLB (BTLB) support on 32-bit CPUs
* sparse and build-warning fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZQDAAwAKCRD3ErUQojoP
X5wDAP4jxLxuVnUCpV5hUdFoJC5lkRM2LigbWDSfDQGHaycr0QD+NerBYX8Ejo6n
x0zHqqtBBe1fgU0QfRdwHeE7hlOiigI=
=FDci
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- fix reference to exported symbols for parisc64 [Masahiro Yamada]
- Block-TLB (BTLB) support on 32-bit CPUs
- sparse and build-warning fixes
* tag 'parisc-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
linux/export: fix reference to exported functions for parisc64
parisc: BTLB: Initialize BTLB tables at CPU startup
parisc: firmware: Simplify calling non-PA20 functions
parisc: BTLB: _edata symbol has to be page aligned for BTLB support
parisc: BTLB: Add BTLB insert and purge firmware function wrappers
parisc: BTLB: Clear possibly existing BTLB entries
parisc: Prepare for Block-TLB support on 32-bit kernel
parisc: shmparam.h: Document aliasing requirements of PA-RISC
parisc: irq: Make irq_stack_union static to avoid sparse warning
parisc: drivers: Fix sparse warning
parisc: iosapic.c: Fix sparse warnings
parisc: ccio-dma: Fix sparse warnings
parisc: sba-iommu: Fix sparse warnigs
parisc: sba: Fix compile warning wrt list of SBA devices
parisc: sba_iommu: Fix build warning if procfs if disabled
John David Anglin reported parisc has been broken since commit
ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost").
Like ia64, parisc64 uses a function descriptor. The function
references must be prefixed with P%.
Also, symbols prefixed $$ from the library have the symbol type
STT_LOPROC instead of STT_FUNC. They should be handled as functions
too.
Fixes: ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Tested-by: Helge Deller <deller@gmx.de>
Closes: https://lore.kernel.org/linux-parisc/1901598a-e11d-f7dd-a5d9-9a69d06e6b6e@bell.net/T/#u
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit
more conservative to fix kexec() lockups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=S38E
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix preemption delays in the SGX code, remove unnecessarily
UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
make the x86 SMP init code a bit more conservative to fix kexec()
lockups"
* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
x86/smp: Don't send INIT to non-present and non-booted CPUs
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets
are hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YpmE
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
The arch_calc_vm_prot_bits() macro uses VM_PKEY_BIT0 etc. which are
not part of the UAPI, so the macro is completely useless for userspace.
It is also hidden behind the CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
config switch which we shouldn't expose to userspace. Thus let's move
this macro into a new internal header instead.
Fixes: 8f62c88322 ("x86/mm/pkeys: Add arch-specific VMA protection bits")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/r/20230906162658.142511-1-thuth@redhat.com
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow, and
-Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined anywhere
- Show help messages of config fragments in 'make help'
-----BEGIN PGP SIGNATURE-----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=lfUi
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
and -Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined
anywhere
- Show help messages of config fragments in 'make help'
* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
kconfig: fix possible buffer overflow
kbuild: Show marked Kconfig fragments in "help"
kconfig: add warn-unknown-symbols sanity check
kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
Documentation/llvm: refresh docs
modpost: Skip .llvm.call-graph-profile section check
kbuild: support modules_sign for external modules as well
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
kbuild: move more module installation code to scripts/Makefile.modinst
kbuild: reduce the number of mkdir calls during modules_install
kbuild: remove $(MODLIB)/source symlink
kbuild: move depmod rule to scripts/Makefile.modinst
kbuild: add modules_sign to no-{compiler,sync-config}-targets
kbuild: do not run depmod for 'make modules_sign'
kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
alpha: remove <asm/export.h>
alpha: replace #include <asm/export.h> with #include <linux/export.h>
ia64: remove <asm/export.h>
ia64: replace #include <asm/export.h> with #include <linux/export.h>
sparc: remove <asm/export.h>
...
Buffer 'new_argv' is accessed without bound check after accessing with
bound check via 'new_argc' index.
Fixes: e298f3b49d ("kconfig: add built-in function support")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently the Kconfig fragments in kernel/configs and arch/*/configs
that aren't used internally aren't discoverable through "make help",
which consists of hard-coded lists of config fragments. Instead, list
all the fragment targets that have a "# Help: " comment prefix so the
targets can be generated dynamically.
Add logic to the Makefile to search for and display the fragment and
comment. Add comments to fragments that are intended to be direct targets.
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Introduce KCONFIG_WARN_UNKNOWN_SYMBOLS environment variable,
which makes Kconfig warn about unknown config symbols.
This is especially useful for continuous kernel uprevs when
some symbols can be either removed or renamed between kernel
releases (which can go unnoticed otherwise).
By default KCONFIG_WARN_UNKNOWN_SYMBOLS generates warnings,
which are non-terminal. There is an additional environment
variable KCONFIG_WERROR that overrides this behaviour and
turns warnings into errors.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 2eab791f94 ("kbuild: dummy-tools: support MPROFILE_KERNEL
checks for ppc") added support for ppc64le's checks for
-mprofile-kernel.
Now, commit aec0ba7472 ("powerpc/64: Use -mprofile-kernel for big
endian ELFv2 kernels") added support for -mprofile-kernel even on
big-endian ppc.
So lift the check in gcc-check-mprofile-kernel.sh to support big-endian too.
Fixes: aec0ba7472 ("powerpc/64: Use -mprofile-kernel for big endian ELFv2 kernels")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
.llvm.call-graph-profile section is added by clang when the kernel is
built with profiles (e.g. -fprofile-sample-use= or -fprofile-use=).
Note that .llvm.call-graph-profile intentionally uses REL relocations
to decrease the object size, for more details see
https://reviews.llvm.org/D104080.
The section contains edge information derived from text sections,
so .llvm.call-graph-profile itself doesn't need more analysis as
the text sections have been analyzed.
This change fixes the kernel build with clang and a sample profile
which currently fails with:
"FATAL: modpost: Please add code to calculate addend for this architecture"
Signed-off-by: Denis Nikitin <denik@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The modules_sign target is currently only available for in-tree modules,
but it actually works for external modules as well.
Move the modules_sign rule to the common part.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit d890f510c8 ("MODSIGN: Add modules_sign make target") introduced
'make modules_sign' to manually sign modules.
Some time later, commit d9d8d7ed49 ("MODSIGN: Add option to not sign
modules during modules_install") introduced CONFIG_MODULE_SIG_ALL.
If it was disabled, mod_sign_cmd was set to no-op ('true' command).
It affected not only 'make modules_install' but also 'make modules_sign'.
With CONFIG_MODULE_SIG_ALL=n, neither modules_install nor modules_sign
is able to sign modules.
Kbuild has kept that behavior, and nobody has complained about it, but
I think it is weird.
CONFIG_MODULE_SIG_ALL=n should turn off signing only for modules_install.
If users want to sign modules manually, modules_sign should be offered.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Move more relevant code to scripts/Makefile.modinst.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Calling 'mkdir' for every module results in redundant syscalls.
Use $(sort ...) to drop the duplicated directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The script bpf_doc.py generates multiple SyntaxWarnings related to invalid
escape sequences when executed with Python 3.12. These warnings do not appear
in Python 3.10 and 3.11 and do not affect the kernel build, which completes
successfully.
This patch resolves these SyntaxWarnings by converting the relevant string
literals to raw strings or by escaping backslashes. This ensures that
backslashes are interpreted as literal characters, eliminating the warnings.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230829074931.2511204-1-vishalc@linux.ibm.com
- Work from Carlos Bilbao to integrate rustdoc output into the generated
HTML documentation. This took some work to figure out how to do it
without slowing the docs build and without creating people who don't have
Rust installed, but Carlos got there.
- Move the loongarch and mips architecture documentation under
Documentation/arch/.
- Some more maintainer documentation from Jakub
...plus the usual assortment of updates, translations, and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
/ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
=C3Uv
-----END PGP SIGNATURE-----
Merge tag 'docs-6.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to support
LLVM 16 as well as proper support for '__noreturn' C functions, which
are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a few
new checks to cover for even more cases, plus adds some more help
texts. All this together will hopefully make problematic setups
easier to identify and to be solved by users building the kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it allows
the resulting identifier to be used to declare new items and it
allows to transform the identifiers before concatenating them, e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes in
this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of fields,
allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait, which
allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied later
in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for performance,
using 'krealloc_aligned()' too, which forwards the call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a 'PhantomPinned'
field to Rust structs that contain C structs which must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library using
the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are joining
as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups.
-----BEGIN PGP SIGNATURE-----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=BAP+
-----END PGP SIGNATURE-----
Merge tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested
structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to
support LLVM 16 as well as proper support for '__noreturn' C
functions, which are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a
few new checks to cover for even more cases, plus adds some more
help texts. All this together will hopefully make problematic
setups easier to identify and to be solved by users building the
kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it
allows the resulting identifier to be used to declare new items and
it allows to transform the identifiers before concatenating them,
e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes
in this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of
fields, allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait,
which allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied
later in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for
performance, using 'krealloc_aligned()' too, which forwards the
call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a
'PhantomPinned' field to Rust structs that contain C structs which
must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than
inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library
using the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are
joining as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups"
* tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits)
rust: init: update expanded macro explanation
rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`
rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>`
rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>`
rust: init: add support for arbitrary paths in init macros
rust: init: add functions to create array initializers
rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields
rust: init: make initializer values inaccessible after initializing
rust: init: wrap type checking struct initializers in a closure
rust: init: make guards in the init macros hygienic
rust: add derive macro for `Zeroable`
rust: init: make `#[pin_data]` compatible with conditional compilation of fields
rust: init: consolidate init macros
docs: rust: clarify what 'rustup override' does
docs: rust: update instructions for obtaining 'core' source
docs: rust: add command line to rust-analyzer section
scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc`
rust: bindgen: upgrade to 0.65.1
rust: enable `no_mangle_with_rust_abi` Clippy lint
rust: upgrade to Rust 1.71.1
...
depmod is a part of the module installation.
scripts/Makefile.modinst is a better place to run it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
'make srcdeb-pkg' generates a source package, which you can build
later by using dpkg-buildpackage.
In older dpkg versions, 'dpkg-buildpackage --jobs=N' sets not only
DEB_BUILD_OPTIONS but also MAKEFLAGS. Hence, passing -j or --jobs
to dpkg-buildpackage was enough for kicking the parallel execution.
The behavior was changed by commit 1d0ea9b2ba3f ("dpkg-buildpackage:
Change -j, --jobs semantics to non-force mode") of dpkg project. [1]
Since then, 'dpkg-buildpackage --jobs=N' sets only DEB_BUILD_OPTIONS,
which is not parsed by the current debian/rules. To build the package
in parallel, you need to pass the alternative --jobs-force option or
set the MAKEFLAGS environment variable.
Debian policy [2] suggests the following code snippet for debian/rules.
ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
MAKEFLAGS += -j$(NUMJOBS)
endif
I tweaked the code to filter out parallel=1 and passed --jobs=1 to
dpkg-buildpackage from scripts/Makefile.package. It is needed to force
'make deb-pkg' without the -j option to run in serial. Please note that
dpkg-buildpackage sets parallel=<nproc> in DEB_BUILD_OPTIONS by default
(that is, --jobs=auto is the default) and --jobs=1 is needed to restore
the serial execution. When dpkg-buildpackage is invoked from Kbuild,
the number of jobs is inherited from the top level Makefile. Passing
--jobs=1 to dpkg-buildpackage allows debian/rules to skip parsing
DEB_BUILD_OPTIONS.
[1] 1d0ea9b2ba
[2] https://www.debian.org/doc/debian-policy/ch-source.html#s-debianrules-options
Reported-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This kunit update for Linux 6.6.rc1 consists of:
-- Adds support for running Rust documentation tests as KUnit tests
-- Makes init, str, sync, types doctests compilable/testable
-- Adds support for attributes API which include speed, modules
attributes, ability to filter and report attributes.
-- Adds support for marking tests slow using attributes API.
-- Adds attributes API documentation
-- Fixes to wild-memory-access bug in kunit_filter_suites() and
a possible memory leak in kunit_filter_suites()
-- Adds support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests.
-----BEGIN PGP SIGNATURE-----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=Nsb8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- add support for running Rust documentation tests as KUnit tests
- make init, str, sync, types doctests compilable/testable
- add support for attributes API which include speed, modules
attributes, ability to filter and report attributes
- add support for marking tests slow using attributes API
- add attributes API documentation
- fix a wild-memory-access bug in kunit_filter_suites() and a possible
memory leak in kunit_filter_suites()
- add support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests
* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
kunit: fix struct kunit_attr header
kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
kunit: Allow kunit test modules to use test filtering
kunit: Make 'list' action available to kunit test modules
kunit: Report the count of test suites in a module
kunit: fix uninitialized variables bug in attributes filtering
kunit: fix possible memory leak in kunit_filter_suites()
kunit: fix wild-memory-access bug in kunit_filter_suites()
kunit: Add documentation of KUnit test attributes
kunit: add tests for filtering attributes
kunit: time: Mark test as slow using test attributes
kunit: memcpy: Mark tests as slow using test attributes
kunit: tool: Add command line interface to filter and report attributes
kunit: Add ability to filter attributes
kunit: Add module attribute
kunit: Add speed attribute
kunit: Add test attributes API structure
MAINTAINERS: add Rust KUnit files to the KUnit entry
rust: support running Rust documentation tests as KUnit ones
rust: types: make doctests compilable/testable
...
doc.2023.07.14b: Documentation updates.
fixes.2023.08.16a: Miscellaneous fixes, perhaps most notably simplifying
SRCU_NOTIFIER_INIT() as suggested.
rcu-tasks.2023.07.24a: RCU Tasks updates, most notably treating
Tasks RCU callbacks as lazy while still treating synchronous
grace periods as urgent. Also fixes one bug that restores the
ability to apply debug-objects to RCU Tasks and another that
fixes a race condition that could result in false-positive
failures of the boot-time self-test code.
rcuscale.2023.07.14b: RCU-scalability performance-test updates,
most notably adding the ability to measure the RCU-Tasks's
grace-period kthread's CPU consumption. This proved
quite useful for the rcu-tasks.2023.07.24a work.
refscale.2023.07.14b: Reference-acquisition/release performance-test
updates, including a fix for an uninitialized wait_queue_head_t.
torture.2023.08.14a: Miscellaneous torture-test updates.
torturescripts.2023.07.20a: Torture-test scripting updates, including
removal of the non-longer-functional formal-verification scripts,
test builds of individual RCU Tasks flavors, better diagnostics
for loss of connectivity for distributed rcutorture tests,
disabling of reboot loops in qemu/KVM-based rcutorture testing,
and passing of init parameters to rcutorture's init program.
-----BEGIN PGP SIGNATURE-----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=EujZ
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.08.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably simplifying
SRCU_NOTIFIER_INIT() as suggested
- RCU Tasks updates, most notably treating Tasks RCU callbacks as lazy
while still treating synchronous grace periods as urgent. Also fixes
one bug that restores the ability to apply debug-objects to RCU Tasks
and another that fixes a race condition that could result in
false-positive failures of the boot-time self-test code
- RCU-scalability performance-test updates, most notably adding the
ability to measure the RCU-Tasks's grace-period kthread's CPU
consumption. This proved quite useful for the RCU Tasks work
- Reference-acquisition/release performance-test updates, including a
fix for an uninitialized wait_queue_head_t
- Miscellaneous torture-test updates
- Torture-test scripting updates, including removal of the
non-longer-functional formal-verification scripts, test builds of
individual RCU Tasks flavors, better diagnostics for loss of
connectivity for distributed rcutorture tests, disabling of reboot
loops in qemu/KVM-based rcutorture testing, and passing of init
parameters to rcutorture's init program
* tag 'rcu.2023.08.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (64 commits)
rcu: Use WRITE_ONCE() for assignments to ->next for rculist_nulls
rcu: Make the rcu_nocb_poll boot parameter usable via boot config
rcu: Mark __rcu_irq_enter_check_tick() ->rcu_urgent_qs load
srcu,notifier: Remove #ifdefs in favor of SRCU Tiny srcu_usage
rcutorture: Stop right-shifting torture_random() return values
torture: Stop right-shifting torture_random() return values
torture: Move stutter_wait() timeouts to hrtimers
torture: Move torture_shuffle() timeouts to hrtimers
torture: Move torture_onoff() timeouts to hrtimers
torture: Make torture_hrtimeout_*() use TASK_IDLE
torture: Add lock_torture writer_fifo module parameter
torture: Add a kthread-creation callback to _torture_create_kthread()
rcu-tasks: Fix boot-time RCU tasks debug-only deadlock
rcu-tasks: Permit use of debug-objects with RCU Tasks flavors
checkpatch: Complain about unexpected uses of RCU Tasks Trace
torture: Cause mkinitrd.sh to indicate failure on compile errors
torture: Make init program dump command-line arguments
torture: Switch qemu from -nographic to -display none
torture: Add init-program support for loongarch
torture: Avoid torture-test reboot loops
...
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver).
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song).
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn).
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva).
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt).
- Convert nsproxy.count to refcount_t (Elena Reshetova).
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test.
- Fix build failure with gcc-plugins on GCC 14+.
- Fix selftests to respect SKIP for signal-delivery tests.
- Fix CFI warning for paravirt callback prototype.
- Clarify documentation for seq_show_option_n() usage.
-----BEGIN PGP SIGNATURE-----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=9ZWP
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As has become normal, changes are scattered around the tree (either
explicitly maintainer Acked or for trivial stuff that went ignored):
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver)
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song)
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva)
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt)
- Convert nsproxy.count to refcount_t (Elena Reshetova)
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test
- Fix build failure with gcc-plugins on GCC 14+
- Fix selftests to respect SKIP for signal-delivery tests
- Fix CFI warning for paravirt callback prototype
- Clarify documentation for seq_show_option_n() usage"
* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
kallsyms: Change func signature for cleanup_symbol_name()
kallsyms: Fix kallsyms_selftest failure
nsproxy: Convert nsproxy.count to refcount_t
integrity: Annotate struct ima_rule_opt_list with __counted_by
lkdtm: Add FAM_BOUNDS test for __counted_by
Compiler Attributes: counted_by: Adjust name and identifier expansion
um: refactor deprecated strncpy to memcpy
um: vector: refactor deprecated strncpy
alpha: Replace one-element array with flexible-array member
hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
list: Introduce CONFIG_LIST_HARDENED
list_debug: Introduce inline wrappers for debug checks
compiler_types: Introduce the Clang __preserve_most function attribute
gcc-plugins: Rename last_stmt() for GCC 14+
selftests/harness: Actually report SKIP for signal tests
x86/paravirt: Fix tlb_remove_table function callback prototype warning
EISA: Replace all non-returning strlcpy with strscpy
perf: Replace strlcpy with strscpy
um: Remove strlcpy declaration
...
Currently, bloat-o-meter does not take into account weak symbols, and
thus ignores any size changes in code or data marked __weak.
Fix this by handling weak code ("w"/"W") and data ("v"/"V").
Link: https://lkml.kernel.org/r/a1e7abd2571c3bbfe75345d6ee98b276d2d5c39d.1692200010.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for printing the backtrace of stackdepot handle.
This is the preparation patch for dumping page_owner,
slabtrace usage.
Link: https://lkml.kernel.org/r/20230808083020.22254-6-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since we often use 'unsigned long', 'size_t', 'usigned int'
and 'struct page', we add these common types to utils.
Link: https://lkml.kernel.org/r/20230808083020.22254-4-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we get an text address from coredump and we cannot find
this address in vmlinux, it might located in kernel module.
We want to know which kernel module it located in.
This GDB scripts can help us to find the target kernel module.
(gdb) lx-getmod-by-textaddr 0xffff800002d305ac
0xffff800002d305ac is in kasan_test.ko
Link: https://lkml.kernel.org/r/20230808083020.22254-3-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Add GDB memory helper commands", v2.
I've created some GDB commands I think useful when I debug some memory
issues and kernel module issue.
For memory issue, we would like to get slabinfo, slabtrace, page_owner and
vmallocinfo to debug the memory issues.
For module issue, we would like to query kernel module name when we get a
module text address and load module symbol by specific path.
Patch 1-2:
- Add kernel module related command.
Patch 3-5:
- Prepares for the memory-related command.
Patch 6-8:
- Add memory-related commands.
This patch (of 8):
Add lx-symbols <ko_path> command to support add specific
ko module.
Example output like below:
(gdb) lx-symbols mm/kasan/kasan_test.ko
loading @0xffff800002d30000: mm/kasan/kasan_test.ko
Link: https://lkml.kernel.org/r/20230808083020.22254-1-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20230808083020.22254-2-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
"externs should be avoided in .c files" needs an exception for linker
symbols, like those that mark the start, stop of many kernel sections.
Since checkpatch already checks REALNAME to avoid looking at fragments
changing vmlinux.lds.h, add a new else-if block to look at them
instead. As a simple heuristic, treat all words (in the patch-line)
as possible symbols, to screen later warnings.
For my test case, the possible-symbols included BOUNDED_BY (a macro),
which is extra, but not troublesome - these are just to screen
WARNINGS that might be issued on later fragments (changing .c files)
Where the WARN is issued, precede it with an else-if block to catch
one common extern-in-c use case: "extern struct foo bar[]". Here we
can at least issue a softer warning, after checking for a match with a
maybe-linker-symbol parsed earlier from the patch.
Though heuristic, it worked for my test-case, allowing both start__,
stop__ $symbol's (wo the prefixes specifically named). I've coded it
narrowly, it can be expanded later to cover any other expressions.
It does require that the externs in .c's have the additions to
vmlinux.lds.h in the same patch. And requires vmlinux.lds.h before .c
fragments.
Link: https://lkml.kernel.org/r/20230808033019.21911-2-jim.cromie@gmail.com
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both `core` and `alloc` have their `cfgs` (such as `no_rc`) missing
in `rust-project.json`.
To remedy this, pass the flags to `generate_rust_analyzer.py` for
them to be added to a dictionary where each key corresponds to
a crate and each value to a list of `cfg`s. The dictionary is then
used to pass the `cfg`s to each crate in the generated file (for
`core` and `alloc` only).
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230804171448.54976-1-yakoyoku@gmail.com
[ Removed `Suggested-by` as discussed in mailing list. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There are few of these, so enable them whenever W=1 is enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The stringop and format warnings got disabled globally when they were
newly introduced in commit bd664f6b3e ("disable new gcc-7.1.1 warnings
for now"), 217c3e0196 ("disable stringop truncation warnings for now")
and 5a76021c2e ("gcc-10: disable 'stringop-overflow' warning for now").
In all cases, the sentiment at the time was that the warnings are
useful, and we actually addressed a number of real bugs based on
them, but we never managed to eliminate them all because even the
build bots using W=1 builds only see the -Wstringop-truncation
warnings that are enabled at that level.
Move these into the W=1 section to give them a larger build coverage
and actually eliminate them over time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some warning options are disabled at one place and then conditionally
re-enabled later in scripts/Makefile.extrawarn.
For consistency, rework this file so each of those warnings only
gets etiher enabled or disabled based on the W= flags but not both.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Warning options are enabled and disabled in inconsistent ways and
inconsistent locations. Start rearranging those by moving all options
into Makefile.extrawarn.
This should not change any behavior, but makes sure we can group them
in a way that ensures that each warning that got temporarily disabled
is turned back on at an appropriate W=1 level later on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
'lsmod' shows total core layout size, so we need to sum up all the
sections in core layout in gdb scripts.
/ # lsmod
kasan_test 200704 0 - Live 0xffff80007f640000
Before patch:
(gdb) lx-lsmod
Address Module Size Used by
0xffff80007f640000 kasan_test 36864 0
After patch:
(gdb) lx-lsmod
Address Module Size Used by
0xffff80007f640000 kasan_test 200704 0
Link: https://lkml.kernel.org/r/20230710092852.31049-1-Kuan-Ying.Lee@mediatek.com
Fixes: b4aff7513d ("scripts/gdb: use mem instead of core_layout to get the module address")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
lx-symbols assumes that module's .text sections is located at
`module->mem[MOD_TEXT].base` and passes it to add-symbol-file command.
However, .text section follows after .plt section in modules built by LLVM
toolchain for arm64 target. Symbol addresses are skewed in GDB.
Fix this issue by using the address of .text section stored in
`module->sect_attrs`.
Link: https://lkml.kernel.org/r/20230801121052.2475183-1-koudai@google.com
Signed-off-by: Koudai Iwahori <koudai@google.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
CONFIG_* switches should not be exposed in uapi headers. The macros that
are defined here are also only useful for the kernel code, so let's move
them to asm/cmpxchg.h instead.
The only two files that are using these macros are the headers
arch/ia64/include/asm/bitops.h and arch/ia64/include/asm/atomic.h and
these include asm/cmpxchg.h via asm/intrinsics.h, so this movement should
not cause any trouble.
Link: https://lkml.kernel.org/r/20230426065032.517693-1-thuth@redhat.com
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/net/ethernet/intel/idpf/idpf.h uses offsetof to
initialize the enum enumerators:
enum idpf_cap_field {
IDPF_BASE_CAPS = -1,
IDPF_CSUM_CAPS = offsetof(struct virtchnl2_get_capabilities,
csum_caps),
IDPF_SEG_CAPS = offsetof(struct virtchnl2_get_capabilities,
seg_caps),
IDPF_RSS_CAPS = offsetof(struct virtchnl2_get_capabilities,
rss_caps),
IDPF_HSPLIT_CAPS = offsetof(struct virtchnl2_get_capabilities,
hsplit_caps),
IDPF_RSC_CAPS = offsetof(struct virtchnl2_get_capabilities,
rsc_caps),
IDPF_OTHER_CAPS = offsetof(struct virtchnl2_get_capabilities,
other_caps),
};
kernel-doc parses the above enumerator with a ',' inside the
macro and treats 'csum_caps', 'seg_caps' etc. also as enumerators
resulting in the warnings:
drivers/net/ethernet/intel/idpf/idpf.h:130: warning: Enum value
'csum_caps' not described in enum 'idpf_cap_field'
drivers/net/ethernet/intel/idpf/idpf.h:130: warning: Enum value
'seg_caps' not described in enum 'idpf_cap_field'
drivers/net/ethernet/intel/idpf/idpf.h:130: warning: Enum value
'rss_caps' not described in enum 'idpf_cap_field'
drivers/net/ethernet/intel/idpf/idpf.h:130: warning: Enum value
'hsplit_caps' not described in enum 'idpf_cap_field'
drivers/net/ethernet/intel/idpf/idpf.h:130: warning: Enum value
'rsc_caps' not described in enum 'idpf_cap_field'
drivers/net/ethernet/intel/idpf/idpf.h:130: warning: Enum value
'other_caps' not described in enum 'idpf_cap_field'
Fix it by removing the macro arguments within the parentheses.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230815210417.98749-3-pavan.kumar.linga@intel.com
At present, if the macros DEFINE_DMA_UNMAP_ADDR() and
DEFINE_DMA_UNMAP_LEN() are used in the structures as shown
below, instead of parsing the parameter in the parentheses,
kernel-doc parses 'DEFINE_DMA_UNMAP_ADDR(' and
'DEFINE_DMA_UNMAP_LEN(' which results in the following
warnings:
drivers/net/ethernet/intel/idpf/idpf_txrx.h:201: warning: Function
parameter or member 'DEFINE_DMA_UNMAP_ADDR(dma' not described in
'idpf_tx_buf'
drivers/net/ethernet/intel/idpf/idpf_txrx.h:201: warning: Function
parameter or member 'DEFINE_DMA_UNMAP_LEN(len' not described in
'idpf_tx_buf'
struct idpf_tx_buf {
DEFINE_DMA_UNMAP_ADDR(dma);
DEFINE_DMA_UNMAP_LEN(len);
};
Fix the warnings by parsing DEFINE_DMA_UNMAP_ADDR() and
DEFINE_DMA_UNMAP_LEN().
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230815210417.98749-2-pavan.kumar.linga@intel.com
The regex search for declarations of struct of_device_id was missing
cases that had a compiler annotation such as "__maybe_unused". Improve
the regex to allow for these. Use '\S' instead of specific characters to
shorten the regex. That also finds some more compatibles using '.'
characters.
Unfortunately, these changes add ~400 more compatibles without a
schema.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230804190130.1936566-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Tested with Qt5 5.15 and Qt6 6.4. Note that earlier versions of Qt5
are no longer guaranteed to work.
Signed-off-by: Boris Kolpackov <boris@codesynthesis.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In LLVM 16, anonymous items may return names like `(unnamed union at ..)`
rather than empty names [1], which breaks Rust-enabled builds because
bindgen assumed an empty name instead of detecting them via
`clang_Cursor_isAnonymous` [2]:
$ make rustdoc LLVM=1 CLIPPY=1 -j$(nproc)
RUSTC L rust/core.o
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
BINDGEN rust/uapi/uapi_generated.rs
thread 'main' panicked at '"ftrace_branch_data_union_(anonymous_at__/_/include/linux/compiler_types_h_146_2)" is not a valid Ident', .../proc-macro2-1.0.24/src/fallback.rs:693:9
...
thread 'main' panicked at '"ftrace_branch_data_union_(anonymous_at__/_/include/linux/compiler_types_h_146_2)" is not a valid Ident', .../proc-macro2-1.0.24/src/fallback.rs:693:9
...
This was fixed in bindgen 0.62.0. Therefore, upgrade bindgen to
a more recent version, 0.65.1, to support LLVM 16.
Since bindgen 0.58.0 changed the `--{white,black}list-*` flags to
`--{allow,block}list-*` [3], update them on our side too.
In addition, bindgen 0.61.0 moved its CLI utility into a binary crate
called `bindgen-cli` [4]. Thus update the installation command in the
Quick Start guide.
Moreover, bindgen 0.61.0 changed the default functionality to bind
`size_t` to `usize` [5] and added the `--no-size_t-is-usize` flag
to not bind `size_t` as `usize`. Then bindgen 0.65.0 removed
the `--size_t-is-usize` flag [6]. Thus stop passing the flag to bindgen.
Finally, bindgen 0.61.0 added support for the `noreturn` attribute (in
its different forms) [7]. Thus remove the infinite loop in our Rust
panic handler after calling `BUG()`, since bindgen now correctly
generates a `BUG()` binding that returns `!` instead of `()`.
Link: 19e984ef8f [1]
Link: https://github.com/rust-lang/rust-bindgen/pull/2319 [2]
Link: https://github.com/rust-lang/rust-bindgen/pull/1990 [3]
Link: https://github.com/rust-lang/rust-bindgen/pull/2284 [4]
Link: cc78b6fdb6 [5]
Link: https://github.com/rust-lang/rust-bindgen/pull/2408 [6]
Link: https://github.com/rust-lang/rust-bindgen/issues/2094 [7]
Signed-off-by: Aakash Sen Sharma <aakashsensharma@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1013
Tested-by: Ariel Miculas <amiculas@cisco.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230612194311.24826-1-aakashsensharma@gmail.com
[ Reworded commit message. Mentioned the `bindgen-cli` binary crate
change, linked to it and updated the Quick Start guide. Re-added a
deleted "as" word in a code comment and reflowed comment to respect
the maximum length. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is the second upgrade to the Rust toolchain, from 1.68.2 to 1.71.1
(i.e. the latest).
See the upgrade policy [1] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [2] for details.
# Required changes
For the upgrade, this patch requires the following changes:
- Removal of the `__rust_*` allocator functions, together with
the addition of the `__rust_no_alloc_shim_is_unstable` static.
See [3] for details.
- Some more compiler builtins added due to `<f{32,64}>::midpoint()`
that got added in Rust 1.71 [4].
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://rust-for-linux.com/rust-version-policy [1]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [2]
Link: https://github.com/rust-lang/rust/pull/86844 [3]
Link: https://github.com/rust-lang/rust/pull/92048 [4]
Closes: https://github.com/Rust-for-Linux/linux/issues/68
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20230729220317.416771-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Menuconfig has a feature where you can "press the key in the (#) prefix
to jump directly to that location. You will be returned to the current
search results after exiting this new menu."
This commit adds this feature to nconfig, with almost identical code.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In GCC 14, last_stmt() was renamed to last_nondebug_stmt(). Add a helper
macro to handle the renaming.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
With commit c1177979af ("btf, scripts: Exclude Rust CUs with pahole")
we are now able to use pahole directly to identify Rust compilation
units (CUs) and exclude them from generating BTF debugging information
(when DEBUG_INFO_BTF is enabled).
And if pahole doesn't support the --lang-exclude flag, we can't enable
both RUST and DEBUG_INFO_BTF at the same time.
So, in any case, the script is_rust_module.sh is just redundant and we
can drop it.
NOTE: we may also be able to drop the "Rust loadable module" mark
inside Rust modules, but it seems safer to keep it for now to make sure
we are not breaking any external tool that may potentially rely on it.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/20230704052136.155445-1-andrea.righi@canonical.com
[ Picked the `Reviewed-by`s from the old patch too. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `rust_is_available.sh` script runs for everybody compiling the
kernel, even if not using Rust. Therefore, it is important to ensure
that the script is correct to avoid breaking people's compilation.
In addition, the script needs to be able to handle a set of subtle
cases, including parsing version strings of different tools.
Therefore, maintenance of this script can be greatly eased with
a set of tests.
Thus add a test suite to cover hopefully most of the setups that
the script may encounter in the wild. Extra setups can be easily
added later on if missing.
The script currently covers all the branches of the shell script,
including several ways in which they may be entered.
Python is used for this script, since the script under test
does not depend on Rust, thus hopefully making it easier for others
to use if the need arises.
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-12-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The script already checks for `$RUSTC` and `$BINDGEN` existing
and exiting without failure. However, one may still pass an
unexpected binary that does not output what the later parsing
expects. The script still successfully reports a failure as
expected, but the error is confusing. For instance:
$ RUSTC=true BINDGEN=bindgen CC=clang scripts/rust_is_available.sh
scripts/rust_is_available.sh: 19: arithmetic expression: expecting primary: "100000 * + 100 * + "
***
*** Please see Documentation/rust/quick-start.rst for details
*** on how to set up the Rust support.
***
Thus add an explicit check and a proper message for unexpected
output from the called command.
Similarly, do so for the `libclang` version parsing, too.
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQYk6s11MASRHW6oxtkqF00EJVqhHOP=5rynWt-QDUsXw@mail.gmail.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-11-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The script already checks if `$RUSTC` and `$BINDGEN` exists via
`command`, but the environment variables may point to a
non-executable file, or the programs may fail for some other reason.
While the script successfully exits with a failure as it should,
the error given can be quite confusing depending on the shell and
the behavior of its `command`. For instance, with `dash`:
$ RUSTC=./mm BINDGEN=bindgen CC=clang scripts/rust_is_available.sh
scripts/rust_is_available.sh: 19: arithmetic expression: expecting primary: "100000 * + 100 * + "
Thus detect failure exit codes when calling `$RUSTC` and `$BINDGEN` and
print a better message, in a similar way to what we do when extracting
the `libclang` version found by `bindgen`.
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQYk6s11MASRHW6oxtkqF00EJVqhHOP=5rynWt-QDUsXw@mail.gmail.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to match the version string, `sed` is used in a couple
cases, and `grep` and `head` in a couple others.
Make the script more consistent and easier to understand by
using the same method, `sed`, for all of them.
This makes the version matching also a bit more strict for
the changed cases, since the strings `rustc ` and `bindgen `
will now be required, which should be fine since `rustc`
complains if one attempts to call it with another program
name, and `bindgen` uses a hardcoded string.
In addition, clarify why one of the existing `sed` commands
does not provide an address like the others.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`bindgen`'s output for `libclang`'s version check contains paths, which
in turn may contain strings that look like version numbers [1][2]:
.../6.1.0-dev/.../rust_is_available_bindgen_libclang.h:2:9: warning: clang version 11.1.0 [-W#pragma-messages], err: false
which the script will pick up as the version instead of the latter.
It is also the case that versions may appear after the actual version
(e.g. distribution's version text), which was the reason behind `head` [3]:
.../rust-is-available-bindgen-libclang.h:2:9: warning: clang version 13.0.0 (Fedora 13.0.0-3.fc35) [-W#pragma-messages], err: false
Thus instead ask for a match after the `clang version` string.
Reported-by: Jordan Isaacs <mail@jdisaacs.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/942 [1]
Reported-by: "Ethan D. Twardy" <ethan.twardy@gmail.com>
Closes: https://lore.kernel.org/rust-for-linux/20230528131802.6390-2-ethan.twardy@gmail.com/ [2]
Reported-by: Tiago Lam <tiagolam@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/789 [3]
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Ethan Twardy <ethan.twardy@gmail.com>
Tested-by: Ethan Twardy <ethan.twardy@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sometimes [1] users may attempt to setup the Rust support by
checking what Kbuild does and they end up finding out about
`scripts/rust_is_available.sh`. Inevitably, they run the script
directly, but unless they setup the required variables,
the result of the script is not meaningful.
We could add some defaults to the variables, but that could be
confusing for those that may override the defaults (compared
to their kernel builds), and `$CC` would not be a simple default
in any case.
Therefore, instead, explicitly check whether the expected variables
are set (`$RUSTC`, `$BINDGEN` and `$CC`). If not, print an explanation
about the fact that the script is meant to be called from Kbuild,
since that is the most likely cause for the variables not being set.
Link: https://lore.kernel.org/oe-kbuild-all/Y6r4mXz5NS0+HVXo@zn.tnic/ [1]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`scripts/rust_is_available.sh` calls `bindgen` with a special
header in order to check whether the `libclang` version in use
is suitable.
However, the invocation itself may fail if, for instance, `bindgen`
cannot locate `libclang`. This is fine for Kconfig (since the
script will still fail and therefore disable Rust as it should),
but it is pretty confusing for users of the `rustavailable` target
given the error will be unrelated:
./scripts/rust_is_available.sh: 21: arithmetic expression: expecting primary: "100000 * + 100 * + "
make: *** [Makefile:1816: rustavailable] Error 2
Instead, run the `bindgen` invocation independently in a previous
step, saving its output and return code. If it fails, then show
the user a proper error message. Otherwise, continue as usual
with the saved output.
Since the previous patch we show a reference to the docs, and
the docs now explain how `bindgen` looks for `libclang`,
thus the error message can leverage the documentation, avoiding
duplication here (and making users aware of the setup guide in
the documentation).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/rust-for-linux/CAKwvOdm5JT4wbdQQYuW+RT07rCi6whGBM2iUAyg8A1CmLXG6Nw@mail.gmail.com/
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/934
Reported-by: Alexandru Radovici <msg4alex@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/921
Reported-by: Matthew Leach <dev@mattleach.net>
Closes: https://lore.kernel.org/rust-for-linux/20230507084116.1099067-1-dev@mattleach.net/
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
People trying out the Rust support in the kernel may get
warnings and errors from `scripts/rust_is_available.sh`
from the `rustavailable` target or the build step.
Some of those users may be following the Quick Start guide,
but others may not (likely those getting warnings from
the build step instead of the target).
While the messages are fairly clear on what the problem is,
it may not be clear how to solve the particular issue,
especially for those not aware of the documentation.
We could add all sorts of details on the script for each one,
but it is better to point users to the documentation instead,
where it is easily readable in different formats. It also
avoids duplication.
Thus add a reference to the documentation whenever the script
fails or there is at least a warning.
Reviewed-by: Finn Behrens <fin@nyantec.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
rust_is_available.sh uses cc-version.sh to identify which C compiler is
in use, as scripts/Kconfig.include does. cc-version.sh isn't designed to
be able to handle multiple arguments in one variable, i.e. "ccache clang".
Its invocation in rust_is_available.sh quotes "$CC", which makes
$1 == "ccache clang" instead of the intended $1 == ccache & $2 == clang.
cc-version.sh could also be changed to handle having "ccache clang" as one
argument, but it only has the one consumer upstream, making it simpler to
fix the caller here.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Link: https://github.com/Rust-for-Linux/linux/pull/873
[ Reworded title prefix and reflow line to 75 columns. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The -v option is passed when this script is invoked from Makefile,
but not when invoked from Kconfig.
As you can see in scripts/Kconfig.include, the 'success' macro suppresses
stdout and stderr anyway, so this script does not need to be quiet.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230109061436.3146442-1-masahiroy@kernel.org
[ Reworded prefix to match the others in the patch series. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit 6ab7e1f95e ("setlocalversion: use only the correct release
tag for git-describe") was absolutely correct to limit which annotated
tags would be used to compute the -01234-gabcdef suffix. Otherwise, if
some random annotated tag exists closer to HEAD than the vX.Y.Z one,
the commit count would be too low.
However, since the version string always includes the
${file_localversion} part, now the problem is that the count can be
too high. For example, building an 6.4.6-rt8 kernel with a few patches
on top, I currently get
$ make -s kernelrelease
6.4.6-rt8-00128-gd78b7f406397
But those 128 commits include the 100 commits that are in
v6.4.6..v6.4.6-rt8, so this is somewhat misleading.
Amend the logic so that, in addition to the linux-next consideration,
the script also looks for a tag corresponding to the 6.4.6-rt8 part of
what will become the `uname -r` string. With this patch (so 29 patches
on top of v6.4.6-rt8), one instead gets
$ make -s kernelrelease
6.4.6-rt8-00029-gd533209291a2
While there, note that the line
git describe --exact-match --match=$tag $tag 2>/dev/null
obviously asks if $tag is an annotated tag, but it does not actually
tell if the commit pointed to has any relation to HEAD. So remove both
uses of --exact-match, and instead just ask if the description
generated is identical to the tag we provided. Since we then already
have the result of
git describe --match=$tag
we also end up reducing the number of times we invoke "git describe".
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Nobody has complained since 2a73cce2da ("scripts/setlocalversion:
remove mercurial, svn and git-svn supports"), so let's also clean up
the header comment accordingly.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
debian/rules is generated by shell, but the escape sequence (\$) is
unreadable.
debian/rules embeds only two variables (ARCH and KERNELRELEASE).
Split them out to debian/rules.vars, and check-in the rest of Makefile
code to scripts/package/debian/rules.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Debian Policy "4.9. Main building script: debian/rules" requires
"debian/rules must start with the line #!/usr/bin/make -f". [1]
Currently, Kbuild does not follow this policy.
When Kbuild generates debian/rules, "#!$(command -v $MAKE) -f" is
expanded by shell. The resuling string may not be "#!/usr/bin/make -f".
There was a reason to opt out the Debian policy.
If you run '/path/to/my/custom/make deb-pkg', debian/rules must also be
invoked by the same Make program. If #!/usr/bin/make were hard-coded in
debian/rules, the sub-make would be executed by a possibly different
Make version.
This is problematic due to the MAKEFLAGS incompatibility, especially the
job server flag. Old Make versions used --jobserver-fds to propagate job
server file descriptors, but Make >= 4.2 uses --jobserver-auth. The flag
disagreement between the parent/child Makes would result in a process
fork explosion.
However, having a non-standard path in the shebang causes another issue;
the generated source package is not portable as such a path does not
exist in other build environments.
This commit solves those conflicting demands.
Hard-code '#!/usr/bin/make -f' in debian/rules to create a portable and
Debian-compliant source package.
Pass '--rules-file=$(MAKE) -f debian/rules' when dpkg-buildpackage is
invoked from Makefile so that debian/rules is executed by the same Make
program as used to start Kbuild.
[1] https://www.debian.org/doc/debian-policy/ch-source.html#main-building-script-debian-rules
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Adds support for out-of-tree rust modules to use the `rust-analyzer`
make target to generate the rust-project.json file.
The change involves adding an optional parameter `external_src` to the
`generate_rust_analyzer.py` which expects the path to the out-of-tree
module's source directory. When this parameter is passed, I have chosen
not to add the non-core modules (samples and drivers) into the result
since these are not expected to be used in third party modules. Related
changes are also made to the Makefile and rust/Makefile allowing the
`rust-analyzer` target to be used for out-of-tree modules as well.
Link: https://github.com/Rust-for-Linux/linux/pull/914
Link: https://github.com/Rust-for-Linux/rust-out-of-tree-module/pull/2
Signed-off-by: Vinay Varma <varmavinaym@gmail.com>
Link: https://lore.kernel.org/r/20230411091714.130525-1-varmavinaym@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove the Elf_Rela variables used in the for-loop in section_rel().
This makes the code consistent; section_rel() only uses Elf_Rel,
section_rela() only uses Elf_Rela.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
MIPS64 little endian target has an odd encoding of r_info.
This commit makes the special handling less ugly. It is still ugly,
but #if conditionals will go away, at least.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
All of addend_*_rel() need the Elf_Rela pointer just for calculating
ELF_R_TYPE(r->r_info).
You can do it on the caller to de-duplicate the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that none of addend_*_rel() returns a meaningful value (the return
value is always 0), change all of them to return the value of r_addend.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* Do not register IRQ bypass consumer if posted interrupts not supported
* Fix missed device interrupt due to non-atomic update of IRR
* Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
* Make VMREAD error path play nice with noinstr
* x86: Acquire SRCU read lock when handling fastpath MSR writes
* Support linking rseq tests statically against glibc 2.35+
* Fix reference count for stats file descriptors
* Detect userspace setting invalid CR0
Non-KVM:
* Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage",
acked by Greg)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmTGZycUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOoxQf+OFUHJwtYWJplE/KYHW1Fyo4NE1xx
IGyakObkA7sYrij43lH0VV4hL0IYv6Z5R6bU4uXyhFjJHsriEmr8Hq+Zug9XE09+
dsP8vZcai9t1ZZLKdI7uCrm4erDAVbeBrFLjUDb6GmPraWOVQOvJe+C3sZQfDWgp
26OO2EsjTM8liq46URrEUF8qzeWkl7eR9uYPpCKJJ5u3DYuXeq6znHRkEu1U2HYr
kuFCayhVZHDMAPGm20/pxK4PX+MU/5une/WLJlqEfOEMuAnbcLxNTJkHF7ntlH+V
FNIM3bWdIaNUH+tgaix3c4RdqWzUq9ubTiN+DyG1kPnDt7K2rmUFBvj1jg==
=9fND
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
getline() returns -1 at EOF as well as on error. It also doesn't set
errno to 0 on success, so initialize it to 0 before using errno to check
for an error condition. See the paragraph here [1]:
For some system calls and library functions (e.g., getpriority(2)),
-1 is a valid return on success. In such cases, a successful return
can be distinguished from an error return by setting errno to zero
before the call, and then, if the call returns a status that indicates
that an error may have occurred, checking to see if errno has a
nonzero value.
Bear has a bug [2] that launches processes with errno set and causes the
following build failure:
$ bear -- make LLVM=1
...
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
read_symbol: Invalid argument
[1]: https://linux.die.net/man/3/errno
[2]: https://github.com/rizsotto/Bear/issues/469
Fixes: 1c975da56a ("scripts/kallsyms: remove KSYM_NAME_LEN_BUFFER")
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
T-Head is a vendor of processor core IP, and they have recently introduced
the RISC-V TH1520 SoC. Remove 'thead' as a typo of 'thread' to avoid
checkpatch incorrectly warning that 'thead' is typo in patches that add
support for T-Head designs in the kernel.
Link: https://lkml.kernel.org/r/20230723010329.674186-1-dfustini@baylibre.com
Link: https://www.t-head.cn/
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Conor Dooley <conor@kernel.org>
Cc: Jisheng Zhang <jszhang@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
RCU Tasks Trace is quite specialized, having been created specifically
for sleepable BPF programs. Because it allows general blocking within
readers, any new use of RCU Tasks Trace must take current use cases into
account. Therefore, update checkpatch.pl to complain about use of any of
the RCU Tasks Trace API members outside of BPF and outside of RCU itself.
[ paulmck: Apply Joe Perches feedback. ]
Cc: Andy Whitcroft <apw@canonical.com> (maintainer:CHECKPATCH)
Cc: Joe Perches <joe@perches.com> (maintainer:CHECKPATCH)
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> (reviewer:CHECKPATCH)
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 8818039f95 ("kbuild: add ability to make source rpm buildable
using koji") added the BuildRequires: field.
Checking the build dependency is fine, but one annoyance is that
'make (bin)rpm-pkg' fails on non-rpm systems [1]. For example, Debian
provides rpmbuild via 'apt install rpm', but of course cannot meet the
requirement listed in the BuildRequires: field.
It is possible to pass RPMOPTS=--nodeps to work around it, but it is
reasonable to do it automatically.
If 'rpm -q rpm' fails, it is not an RPM-managed system. (The command
'rpm' is not installed at all, or was installed by other means.)
In that case, pass --nodeps to skip the build dependency check.
[1]: https://lore.kernel.org/linux-kbuild/Y6mkdYQYmjUz7bqV@li-4a3a4a4c-28e5-11b2-a85c-a8d192c6f089.ibm.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge the similar build targets.
Also, make the output location consistent.
Previously, source packages were created in the build directory,
while binary packages under ~/rpmbuild/RPMS/.
Now, Kbuild creates the rpmbuild/ directory in the build directory,
and saves all packages under it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, 'make rpm-pkg' always builds the kernel from the pristine
source tree in the ~/rpmbuild/BUILD/ directory.
Build the kernel incrementally just like 'make binrpm-pkg'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now kernel.spec and binkernel.spec have the exactly same contents.
Use kernel.spec for binrpm-pkg as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Most of the lines in the spec file are independent of any build
condition.
Split the body of the spec file into scripts/package/kernel.spec.
scripts/package/mkspec will prepend some env-dependent variables.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/package/mkspec preprocesses the spec file by sed, but it is
unreadable. This commit removes the last portion of the sed scripting.
Remove the $S$M prefixes from the conditionally generated lines.
Instead, surround the code with %if %{with_devel} ... %endif.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For the same reason as commit 4243afdb93 ("kbuild: builddeb: always
make modules_install, to install modules.builtin*"), run modules_install
even when CONFIG_MODULES=n to install modules.builtin*.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
To reduce the preprocess of the spec file, invoke the kernel build
from rpmbuild.
Run init/build-version to increment the release number not only for
binrpm-pkg but also for srcrpm-pkg and rpm-pkg.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If this affects only %{buildroot}, it should be enough to use a fixed
string for _arch when it is undefined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The kernel-devel RPM package and the linux-headers Debian package
provide headers and scripts needed for building external modules.
They copy the necessary files in slightly different ways - the RPM
copies almost everything except some exclude patterns, while the Debian
copies less number of files. There is no need to maintain different code
to do the same thing.
Split the Debian code out to scripts/package/install-extmod-build, which
is called from both of the packages.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are some cases where we want to run a command with the same
environment variables as Kbuild uses. For example, 'make coccicheck'
invokes scripts/coccicheck from the top Makefile so that the script can
reference to ${LINUXINCLUDE}, ${KBUILD_EXTMOD}, etc. The top Makefile
defines several phony targets that run a script.
We do it also for an internally used script, which results in a somewhat
complex call graph.
One example:
debian/rules binary-arch
-> make intdeb-pkg
-> scripts/package/builddeb
It is also tedious to add a dedicated target like 'intdeb-pkg' for each
use case.
Add a generic target 'run-command' to run an arbitrary command in an
environment with all Kbuild variables set.
The usage is:
$ make run-command KBUILD_RUN_COMMAND=<command>
The concept is similar to:
$ dpkg-architecture -c <command>
This executes <command> in an environment which has all DEB_* variables
defined.
Convert the existing 'make intdeb-pkg'.
Another possible usage is to interrogate a Make variable.
$ make run-command KBUILD_RUN_COMMAND='echo $(KBUILD_CFLAGS)'
might be useful to see KBUILD_CFLAGS set by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, we rely on the top Makefile defining ARCH option when we
run 'make rpm-pkg' or 'make binrpm-pkg'.
It does not apply when we run 'make srcrpm-pkg', and separately run
'rpmbuild' for the generated SRPM. This is a problem for cross-build.
Just like the Debian package, save the value of ARCH in the spec file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, $MAKE will expand to the GNU Make program that created the
source RPM. This is problematic if you carry it to a different build
host to run 'rpmbuild' there.
Consider this command:
$ /path/to/my/custom/make srcrpm-pkg
The spec file in the SRPM will record '/path/to/my/custom/make', which
exists only on that build environment.
To create a portable SRPM, the spec file should avoid hard-coding $MAKE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is unneeded because the Makefile in the output directory wraps
the top-level Makefile in the srctree.
Just run $MAKE irrespective of the build location.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 3089b2be0c ("kbuild: rpm-pkg: fix build error when _arch is
undefined") does not work as intended; _arch is always defined as
$UTS_MACHINE.
The intention was to define _arch to $UTS_MACHINE only when it is not
defined.
Fixes: 3089b2be0c ("kbuild: rpm-pkg: fix build error when _arch is undefined")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Remove hack for ancient version of module-init-tools that was added in
Linux 3.0.
Since then module-init-tools was replaced with kmod.
This hack adds an additional indirection, and causes confusing errors
to be printed when depmod fails.
Reverts commit 8fc62e5942 ("kbuild: Do not write to builddir in modules_install")
Reverts commit bfe5424a8b ("kbuild: Hack for depmod not handling X.Y versions")
Link: https://lore.kernel.org/linux-modules/CAK7LNAQMs3QBYfWcLkmOQdbbq7cj=7wWbK=AWhdTC2rAsKHXzQ@mail.gmail.com/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
You do not need to remember the index of each jump key because you can
count it up after a key is pressed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jesse Taube <Mr.Bossman075@gmail.com>
Commit 95ac9b3b58 ("menuconfig: Assign jump keys per-page instead
of globally") injected a lot of hacks to the bottom of the textbox
infrastructure.
I reverted many of them without changing the behavior. (almost)
Now, the key markers are inserted when constructing the search result
instead of updating the text buffer on-the-fly.
The buffer passed to the textbox got back to a constant string.
The ugly casts from (const char *) to (char *) went away.
A disadvantage is that the same key numbers might be displayed multiple
times in the dialog if you use a huge window (but I believe it is
unlikely to happen).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jesse Taube <Mr.Bossman075@gmail.com>
Currently, all files with EXPORT_SYMBOL() are rebuilt when CONFIG_MODULES
is flipped due to <linux/export.h> depending on CONFIG_MODULES.
Now that modpost can make a final decision about export symbols,
<linux/export.h> does not need to make EXPORT_SYMBOL() no-op.
Instead, modpost can skip emitting KSYMTAB when CONFIG_MODULES is unset.
This commit will reduce the number of recompilation when CONFIG_MODULES
is toggled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Fix stale help text in gconfig
- Support *.S files in compile_commands.json
- Flatten KBUILD_CFLAGS
- Fix external module builds with Rust so that temporary files are
created in the modules directories instead of the kernel tree
-----BEGIN PGP SIGNATURE-----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=BmWs
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix stale help text in gconfig
- Support *.S files in compile_commands.json
- Flatten KBUILD_CFLAGS
- Fix external module builds with Rust so that temporary files are
created in the modules directories instead of the kernel tree
* tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: rust: avoid creating temporary files
kbuild: flatten KBUILD_CFLAGS
gen_compile_commands: add assembly files to compilation database
kconfig: gconfig: correct program name in help text
kconfig: gconfig: drop the Show Debug Info help text
`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).
Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.
Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.
Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1015
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs
Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs
Fixes: 295d8398c6 ("kbuild: specify output names separately for each emission type from rustc")
Cc: stable@vger.kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Like C source files, tooling can find it useful to have the assembly
source file compilation recorded.
The .S extension appears to used across all architectures.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rust has documentation tests: these are typically examples of
usage of any item (e.g. function, struct, module...).
They are very convenient because they are just written
alongside the documentation. For instance:
/// Sums two numbers.
///
/// ```
/// assert_eq!(mymod::f(10, 20), 30);
/// ```
pub fn f(a: i32, b: i32) -> i32 {
a + b
}
In userspace, the tests are collected and run via `rustdoc`.
Using the tool as-is would be useful already, since it allows
to compile-test most tests (thus enforcing they are kept
in sync with the code they document) and run those that do not
depend on in-kernel APIs.
However, by transforming the tests into a KUnit test suite,
they can also be run inside the kernel. Moreover, the tests
get to be compiled as other Rust kernel objects instead of
targeting userspace.
On top of that, the integration with KUnit means the Rust
support gets to reuse the existing testing facilities. For
instance, the kernel log would look like:
KTAP version 1
1..1
KTAP version 1
# Subtest: rust_doctests_kernel
1..59
# rust_doctest_kernel_build_assert_rs_0.location: rust/kernel/build_assert.rs:13
ok 1 rust_doctest_kernel_build_assert_rs_0
# rust_doctest_kernel_build_assert_rs_1.location: rust/kernel/build_assert.rs:56
ok 2 rust_doctest_kernel_build_assert_rs_1
# rust_doctest_kernel_init_rs_0.location: rust/kernel/init.rs:122
ok 3 rust_doctest_kernel_init_rs_0
...
# rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150
ok 59 rust_doctest_kernel_types_rs_2
# rust_doctests_kernel: pass:59 fail:0 skip:0 total:59
# Totals: pass:59 fail:0 skip:0 total:59
ok 1 rust_doctests_kernel
Therefore, add support for running Rust documentation tests
in KUnit. Some other notes about the current implementation
and support follow.
The transformation is performed by a couple scripts written
as Rust hostprogs.
Tests using the `?` operator are also supported as usual, e.g.:
/// ```
/// # use kernel::{spawn_work_item, workqueue};
/// spawn_work_item!(workqueue::system(), || pr_info!("x"))?;
/// # Ok::<(), Error>(())
/// ```
The tests are also compiled with Clippy under `CLIPPY=1`, just
like normal code, thus also benefitting from extra linting.
The names of the tests are currently automatically generated.
This allows to reduce the burden for documentation writers,
while keeping them fairly stable for bisection. This is an
improvement over the `rustdoc`-generated names, which include
the line number; but ideally we would like to get `rustdoc` to
provide the Rust item path and a number (for multiple examples
in a single documented Rust item).
In order for developers to easily see from which original line
a failed doctests came from, a KTAP diagnostic line is printed
to the log, containing the location (file and line) of the
original test (i.e. instead of the location in the generated
Rust file):
# rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150
This line follows the syntax for declaring test metadata in the
proposed KTAP v2 spec [1], which may be used for the proposed
KUnit test attributes API [2]. Thus hopefully this will make
migration easier later on (suggested by David [3]).
The original line in that test attribute is figured out by
providing an anchor (suggested by Boqun [4]). The original file
is found by walking the filesystem, checking directory prefixes
to reduce the amount of combinations to check, and it is only
done once per file. Ambiguities are detected and reported.
A notable difference from KUnit C tests is that the Rust tests
appear to assert using the usual `assert!` and `assert_eq!`
macros from the Rust standard library (`core`). We provide
a custom version that forwards the call to KUnit instead.
Importantly, these macros do not require passing context,
unlike the KUnit C ones (i.e. `struct kunit *`). This makes
them easier to use, and readers of the documentation do not need
to care about which testing framework is used. In addition, it
may allow us to test third-party code more easily in the future.
However, a current limitation is that KUnit does not support
assertions in other tasks. Thus we presently simply print an
error to the kernel log if an assertion actually failed. This
should be revisited to properly fail the test, perhaps saving
the context somewhere else, or letting KUnit handle it.
Link: https://lore.kernel.org/lkml/20230420205734.1288498-1-rmoar@google.com/ [1]
Link: https://lore.kernel.org/linux-kselftest/20230707210947.1208717-1-rmoar@google.com/ [2]
Link: https://lore.kernel.org/rust-for-linux/CABVgOSkOLO-8v6kdAGpmYnZUb+LKOX0CtYCo-Bge7r_2YTuXDQ@mail.gmail.com/ [3]
Link: https://lore.kernel.org/rust-for-linux/ZIps86MbJF%2FiGIzd@boqun-archlinux/ [4]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 6eb4bd92c1 ("kallsyms: strip LTO suffixes from static functions")
stripped all function/variable suffixes started with '.' regardless
of whether those suffixes are generated at LTO mode or not. In fact,
as far as I know, in LTO mode, when a static function/variable is
promoted to the global scope, '.llvm.<...>' suffix is added.
The existing mechanism breaks live patch for a LTO kernel even if
no <symbol>.llvm.<...> symbols are involved. For example, for the following
kernel symbols:
$ grep bpf_verifier_vlog /proc/kallsyms
ffffffff81549f60 t bpf_verifier_vlog
ffffffff8268b430 d bpf_verifier_vlog._entry
ffffffff8282a958 d bpf_verifier_vlog._entry_ptr
ffffffff82e12a1f d bpf_verifier_vlog.__already_done
'bpf_verifier_vlog' is a static function. '_entry', '_entry_ptr' and
'__already_done' are static variables used inside 'bpf_verifier_vlog',
so llvm promotes them to file-level static with prefix 'bpf_verifier_vlog.'.
Note that the func-level to file-level static function promotion also
happens without LTO.
Given a symbol name 'bpf_verifier_vlog', with LTO kernel, current mechanism will
return 4 symbols to live patch subsystem which current live patching
subsystem cannot handle it. With non-LTO kernel, only one symbol
is returned.
In [1], we have a lengthy discussion, the suggestion is to separate two
cases:
(1). new symbols with suffix which are generated regardless of whether
LTO is enabled or not, and
(2). new symbols with suffix generated only when LTO is enabled.
The cleanup_symbol_name() should only remove suffixes for case (2).
Case (1) should not be changed so it can work uniformly with or without LTO.
This patch removed LTO-only suffix '.llvm.<...>' so live patching and
tracing should work the same way for non-LTO kernel.
The cleanup_symbol_name() in scripts/kallsyms.c is also changed to have the same
filtering pattern so both kernel and kallsyms tool have the same
expectation on the order of symbols.
[1] https://lore.kernel.org/live-patching/20230615170048.2382735-1-song@kernel.org/T/#u
Fixes: 6eb4bd92c1 ("kallsyms: strip LTO suffixes from static functions")
Reported-by: Song Liu <song@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628181926.4102448-1-yhs@fb.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Change "gkc" to "gconfig" in 3 places since it is called "gconfig" and
not "gkc". Add a period at the end of one sentence.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The Show Debug Info option was removed eons ago. Now finish the job
by removing the help text for it also.
Fixes: 7b5d87215b ("gconfig: remove show_debug option")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
also have a kernel-doc tweak for enums and the long-overdue removal of the
outdated and redundant patch-submission comments at the top of the
MAINTAINERS file.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmSnR4EPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YfWIH/0b+gYD0PftjpG1MfPTlvsxm3yiO2IkZR1rX
ZEvzMIk3cqDsZuhv8g4Xh3qrn7QHW9JE8XbOdkMDw+Hd1kkmYeweVhsLhcar44ai
KPBXCbnd6bU6HcjT/o/AEkYVJzZDmKbt8ALi5C81xu8bWn2iybKgnJv1a3M1PFAx
Dr5ne14HTEau5ewYeYPhkC2n1XRIE1BV0k4PdZlQE/67uwhplh9J2P/DiXh3I9DT
0oxh8cZHRVheCkXNYseMWEC5V+xFfh3jP/fvIefuNGCb7AGDSE4s+Wx8I9CbduIN
SwFtsqXRm2cQ8aj950T0E4JQZLVY0DJKrIJo0qh3LrfUYTinQx0=
=tuod
-----END PGP SIGNATURE-----
Merge tag 'docs-6.5-2' of git://git.lwn.net/linux
Pull mode documentation updates from Jonathan Corbet:
"A half-dozen late arriving docs patches. They are mostly fixes, but we
also have a kernel-doc tweak for enums and the long-overdue removal of
the outdated and redundant patch-submission comments at the top of the
MAINTAINERS file"
* tag 'docs-6.5-2' of git://git.lwn.net/linux:
scripts: kernel-doc: support private / public marking for enums
Documentation: KVM: SEV: add a missing backtick
Documentation: ACPI: fix typo in ssdt-overlays.rst
Fix documentation of panic_on_warn
docs: remove the tips on how to submit patches from MAINTAINERS
docs: fix typo in zh_TW and zh_CN translation
* Fix all compiler warnings in arch/parisc and drivers/parisc when
compiled with W=1
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZKUXpAAKCRD3ErUQojoP
X5R0AQCVtMMW1CVVW5WcSu4KCfIYsEZyE41CCiwHYqbJRVrGVQD/a3MRG3Ss3DwV
OOD2eg0u4diiDgpis7m3Ow4R50bnGAk=
=swYk
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
- Fix all compiler warnings in arch/parisc and drivers/parisc when
compiled with W=1
* tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: syscalls: Avoid compiler warnings with W=1
parisc: math-emu: Avoid compiler warnings with W=1
parisc: Raise minimal GCC version to 12.0.0
parisc: unwind: Avoid missing prototype warning for handle_interruption()
parisc: smp: Add declaration for start_cpu_itimer()
parisc: pdt: Get prototype for arch_report_meminfo()
These are the first few patches in the Scope-based Resource Management
series that introduce the infrastructure but not any conversions as of
yet.
Adding the infrastructure now allows multiple people to start using them.
Of note is that Sparse will need some work since it doesn't yet
understand this attribute and might have decl-after-stmt issues -- but I
think that's being worked on.
-----BEGIN PGP SIGNATURE-----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=adZ8
-----END PGP SIGNATURE-----
Merge tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue
Pull scope-based resource management infrastructure from Peter Zijlstra:
"These are the first few patches in the Scope-based Resource Management
series that introduce the infrastructure but not any conversions as of
yet.
Adding the infrastructure now allows multiple people to start using
them.
Of note is that Sparse will need some work since it doesn't yet
understand this attribute and might have decl-after-stmt issues"
* tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue:
kbuild: Drop -Wdeclaration-after-statement
locking: Introduce __cleanup() based infrastructure
apparmor: Free up __cleanup() name
dmaengine: ioat: Free up __cleanup() name
Enums benefit from private markings, too. For netlink attribute
name enums always end with a pair of __$n_MAX and $n_MAX members.
Documenting them feels a bit tedious.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20230621223525.2722703-1-kuba@kernel.org>
Here is the big set of char/misc and other driver subsystem updates for
6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates
on top of that, lots of small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz
recBPLH0ZACKl0wPl4iZ
=A83A
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
Raise the minimum gcc version for parisc64 to 12.0.0 (for __int128 type)
and keep 5.1.0 as minimum for 32-bit parisc target.
Fixes: 8664645ade ("parisc: Raise minimal GCC version")
Signed-off-by: Helge Deller <deller@gmx.de>
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error with
the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the linux-image
Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
-----BEGIN PGP SIGNATURE-----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=Rc1z
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
with the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the
linux-image Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
modpost: define more R_ARM_* for old distributions
kbuild: revive "Entering directory" for Make >= 4.4.1
kbuild: set correct abs_srctree and abs_objtree for package builds
scripts/mksysmap: Ignore prefixed KCFI symbols
kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
kbuild: builddeb: always make modules_install, to install modules.builtin*
modpost: continue even with unknown relocation type
modpost: factor out Elf_Sym pointer calculation to section_rel()
modpost: factor out inst location calculation to section_rel()
kbuild: Disable GCOV for *.mod.o
kbuild: Fix CFI failures with GCOV
kbuild: make clean rule robust against too long argument error
script: modpost: emit a warning when the description is missing
kbuild: make modules_install copy modules.builtin(.modinfo)
linux/export.h: rename 'sec' argument to 'license'
modpost: show offset from symbol for section mismatch warnings
modpost: merge two similar section mismatch warnings
kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
modpost: use null string instead of NULL pointer for default namespace
modpost: squash sym_update_namespace() into sym_add_exported()
...
- Adjust log levels for common messages. (Oleksandr Natalenko,
Alex Williamson)
- Support for dynamic MSI-X allocation. (Reinette Chatre)
- Enable and report PCIe AtomicOp Completer capabilities.
(Alex Williamson)
- Cleanup Kconfigs for vfio bus drivers. (Alex Williamson)
- Add support for CDX bus based devices. (Nipun Gupta)
- Fix race with concurrent mdev initialization. (Eric Farman)
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmSd7QsbHGFsZXgud2ls
bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsiOrcQALKcFPN5OtKQRueLaFC4
Mjg7CkHPUGMGYa7WIXGyBtoU2DvjzQ+6uJUJplY4bKNGLK2xQqUsilyRavDfgW5Q
fRiBEGPd6FM8QYp2X0rbYWmQtTSWCbDhj/107Pu43gSOkH3MzXiiqJehNFO7pO5Y
Az218iiq1nO6/g6Msswowk03C1LoH41maLjsDP4CKfdl9BTaLw0tNGmXBAkF5MZR
Q6D54nu6g20OFXDicYKaKCrB4ydy+pkp7BfFgT7IqtPQtTiAHrhgMJYrU+0IlGwx
ukBAGbKTiK/JySs0EY6Wz3K9hnQTzHWzWlqXO/FmlILBqqEMp18AnM3RZa36GqvT
PrM/wiKoJgp9BFCPApVyPUyok/lrDmirKxBcWgogHC9uh0q7oI3i79k0vXkKPJnp
5IAGhvTpJC7KBIIct8eIGgVcLA6tVPXpd30iqKR61I6X9etfo+f2nwNSjx1dC3eG
B/DnvuTWRjecNrIPUpunHnb/LZFoV/Qq3tam3MV572aMpF0lzowuOxevI5Z4TNf+
l/u923KBAVcotRaMm1huFP2Wkd0K8UCD9zwCpXrctNoXQXtRB9DskOinkOIGT5aS
SaepCt003BWPJ5UlOyQMGtLG1+GPYxjrjvNWryoWStomVrc+WQ6XyAxk4iVZPJBs
kcWTa7r9RU7uiOc2VK/UOiry
=TOvh
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Adjust log levels for common messages (Oleksandr Natalenko, Alex
Williamson)
- Support for dynamic MSI-X allocation (Reinette Chatre)
- Enable and report PCIe AtomicOp Completer capabilities (Alex
Williamson)
- Cleanup Kconfigs for vfio bus drivers (Alex Williamson)
- Add support for CDX bus based devices (Nipun Gupta)
- Fix race with concurrent mdev initialization (Eric Farman)
* tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio:
vfio/mdev: Move the compat_class initialization to module init
vfio/cdx: add support for CDX bus
vfio/fsl: Create Kconfig sub-menu
vfio/platform: Cleanup Kconfig
vfio/pci: Cleanup Kconfig
vfio/pci-core: Add capability for AtomicOp completer support
vfio/pci: Also demote hiding standard cap messages
vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X
vfio/pci: Support dynamic MSI-X
vfio/pci: Probe and store ability to support dynamic MSI-X
vfio/pci: Use bitfield for struct vfio_pci_core_device flags
vfio/pci: Update stale comment
vfio/pci: Remove interrupt context counter
vfio/pci: Use xarray for interrupt context storage
vfio/pci: Move to single error path
vfio/pci: Prepare for dynamic interrupt context storage
vfio/pci: Remove negative check on unsigned vector
vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable
vfio/pci: demote hiding ecap messages to debug level
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations.
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and use
the -mprofile-kernel option (kernel specific ftrace ABI) for big endian
ELFv2 kernels.
- Add initial Dynamic Execution Control Register (DEXCR) support, and allow
the ROP protection instructions to be used on Power 10.
- Various other small features and fixes.
Thanks to: Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean Delvare,
Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry, Nathan
Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul Gortmaker, Randy
Dunlap, Rob Herring, Rohan McLure, Russell Currey, Sachin Sant, Timothy
Pearson, Tom Rix, Uwe Kleine-König.
-----BEGIN PGP SIGNATURE-----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=ssit
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels
- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10
- Various other small features and fixes
Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.
* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...
1, Preliminary ClangBuiltLinux enablement;
2, Add support to clone a time namespace;
3, Add vector extensions support;
4, Add SMT (Simultaneous Multi-Threading) support;
5, Support dbar with different hints;
6, Introduce hardware page table walker;
7, Add jump-label implementation;
8, Add rethook and uprobes support;
9, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=3gt3
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- preliminary ClangBuiltLinux enablement
- add support to clone a time namespace
- add vector extensions support
- add SMT (Simultaneous Multi-Threading) support
- support dbar with different hints
- introduce hardware page table walker
- add jump-label implementation
- add rethook and uprobes support
- some bug fixes and other small changes
* tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (28 commits)
LoongArch: Remove five DIE_* definitions in kdebug.h
LoongArch: Add uprobes support
LoongArch: Use larch_insn_gen_break() for kprobes
LoongArch: Add larch_insn_gen_break() to generate break insns
LoongArch: Check for AMO instructions in insns_not_supported()
LoongArch: Move three functions from kprobes.c to inst.c
LoongArch: Replace kretprobe with rethook
LoongArch: Add jump-label implementation
LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak
LoongArch: Export some arch-specific pm interfaces
LoongArch: Introduce hardware page table walker
LoongArch: Support dbar with different hints
LoongArch: Add SMT (Simultaneous Multi-Threading) support
LoongArch: Add vector extensions support
LoongArch: Add support to clone a time namespace
Makefile: Add loongarch target flag for Clang compilation
LoongArch: Mark Clang LTO as working
LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation
LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target='
LoongArch: Tweak CFLAGS for Clang compatibility
...
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----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=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
The LoongArch kernel is 64-bit and built with the soft-float ABI,
hence the loongarch64-linux-gnusf target. (The "libc" part can affect
the codegen of libcalls: other arches do not use a bare-metal target,
and currently the only fully supported libc on LoongArch is glibc
anyway.)
See: https://lore.kernel.org/loongarch/CAKwvOdnimxv8oJ4mVY74zqtt1x7KTMrWvn2_T9x22SFDbU6rHQ@mail.gmail.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
The changes queued up for v6.5-rc1 for sysctl are in line with
prior efforts to stop usage of deprecated routines which incur
recursion and also make it hard to remove the empty array element
in each sysctl array declaration. The most difficult user to modify
was parport which required a bit of re-thinking of how to declare shared
sysctls there, Joel Granados has stepped up to the plate to do most of
this work and eventual removal of register_sysctl_table(). That work
ended up saving us about 1465 bytes according to bloat-o-meter. Since
we gained a few bloat-o-meter karma points I moved two rather small
sysctl arrays from kernel/sysctl.c leaving us only two more sysctl
arrays to move left.
Most changes have been tested on linux-next for about a month. The last
straggler patches are a minor parport fix, changes to the sysctl
kernel selftest so to verify correctness and prevent regressions for
the future change he made to provide an alternative solution for the
special sysctl mount point target which was using the now deprecated
sysctl child element.
This is all prep work to now finally be able to remove the empty
array element in all sysctl declarations / registrations which is
expected to save us a bit of bytes all over the kernel. That work
will be tested early after v6.5-rc1 is out.
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmSceh0SHG1jZ3JvZkBr
ZXJuZWwub3JnAAoJEM4jHQowkoinBFQQAK9WdpcU8ODoDzoSls4jsCQpZUCfZ+ED
pbCgQqUqu9VPs6bnJ+aXVa6Fh3uCr6+TIfNFM55qI/Sbo2issZ7bm0nvKmGgc6/m
giqDP7btvHqiAsEootci8DVdbBXKkdH4dx3pSwleyN8pdinewH0hrKImaPpahyo6
1mB1du0iI89yjsZmheHVVSyfXXYAnP0PqRVy5Y+qxY7yYlIegQ5uAZmwRE62lfTf
TuiV7OFuDZ2DBYOmqIhfGKGRnfOL5ZVF3iHCrfUpX3p+fEFzDmwvm3vr73PTSrFw
/aRRLa/hOWr5ilw1bvnMcazgQzFEOlQb3DMhBKH7gLl3XHVrM+TaaqYHjUia1+6Y
e2axz/duA2q9uLMW81daRApvHMCgy0exkpC7prfOxF5bgTe4TjA7ZWvGpqG1kPKT
PPSxw80XvG5hLZm4tB0ZWJ5rOfFpiUGGneSeRQwyuClBt73SIO+F03jyGpt83slU
jFE50ac14Zwh1oxpCQtYoR1+bXWdq1QwM5vQBNEuaoTSnJfVjrXqBz/BnqJChtjr
m1vA27+4/dfki2P3gVWF1lGx43ir3uJvqk+BjWXm2CDDJqpRi3N0qcUwZwLuqAAz
/LEgFqK61bpHi/C8c2NWAxIoeWRU4NUOaoiKmZwyt0sKAWU1Yzg70xssYeg7VYqZ
3pvFNVBqkV+F
=sXUU
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"The changes for sysctl are in line with prior efforts to stop usage of
deprecated routines which incur recursion and also make it hard to
remove the empty array element in each sysctl array declaration.
The most difficult user to modify was parport which required a bit of
re-thinking of how to declare shared sysctls there, Joel Granados has
stepped up to the plate to do most of this work and eventual removal
of register_sysctl_table(). That work ended up saving us about 1465
bytes according to bloat-o-meter. Since we gained a few bloat-o-meter
karma points I moved two rather small sysctl arrays from
kernel/sysctl.c leaving us only two more sysctl arrays to move left.
Most changes have been tested on linux-next for about a month. The
last straggler patches are a minor parport fix, changes to the sysctl
kernel selftest so to verify correctness and prevent regressions for
the future change he made to provide an alternative solution for the
special sysctl mount point target which was using the now deprecated
sysctl child element.
This is all prep work to now finally be able to remove the empty array
element in all sysctl declarations / registrations which is expected
to save us a bit of bytes all over the kernel. That work will be
tested early after v6.5-rc1 is out"
* tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: replace child with an enumeration
sysctl: Remove debugging dump_stack
test_sysclt: Test for registering a mount point
test_sysctl: Add an option to prevent test skip
test_sysctl: Add an unregister sysctl test
test_sysctl: Group node sysctl test under one func
test_sysctl: Fix test metadata getters
parport: plug a sysctl register leak
sysctl: move security keys sysctl registration to its own file
sysctl: move umh sysctl registration to its own file
signal: move show_unhandled_signals sysctl to its own file
sysctl: remove empty dev table
sysctl: Remove register_sysctl_table
sysctl: Refactor base paths registrations
sysctl: stop exporting register_sysctl_table
parport: Removed sysctl related defines
parport: Remove register_sysctl_table from parport_default_proc_register
parport: Remove register_sysctl_table from parport_device_proc_register
parport: Remove register_sysctl_table from parport_proc_register
parport: Move magic number "15" to a define
top-level directories.
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs.
- Zhen Lei has enhanced kexec's ability to support two crash regions.
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries.
- And the usual bunch of singleton patches in various places.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA
juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa
2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU=
=F293
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
On CentOS 7, the following build error occurs.
scripts/mod/modpost.c: In function 'addend_arm_rel':
scripts/mod/modpost.c:1312:7: error: 'R_ARM_MOVW_ABS_NC' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
case R_ARM_MOVW_ABS_NC:
^~~~~~~~~~~~~~~~~
R_ARM_THM_ABS5
scripts/mod/modpost.c:1312:7: note: each undeclared identifier is reported only once for each function it appears in
scripts/mod/modpost.c:1313:7: error: 'R_ARM_MOVT_ABS' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
case R_ARM_MOVT_ABS:
^~~~~~~~~~~~~~
R_ARM_THM_ABS5
scripts/mod/modpost.c:1326:7: error: 'R_ARM_THM_MOVW_ABS_NC' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
case R_ARM_THM_MOVW_ABS_NC:
^~~~~~~~~~~~~~~~~~~~~
R_ARM_THM_ABS5
scripts/mod/modpost.c:1327:7: error: 'R_ARM_THM_MOVT_ABS' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
case R_ARM_THM_MOVT_ABS:
^~~~~~~~~~~~~~~~~~
R_ARM_THM_ABS5
Fixes: 12ca2c67d7 ("modpost: detect section mismatch for R_ARM_{MOVW_ABS_NC,MOVT_ABS}")
Fixes: cd1824fb7a ("modpost: detect section mismatch for R_ARM_THM_{MOVW_ABS_NC,MOVT_ABS}")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members
-----BEGIN PGP SIGNATURE-----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=s0j1
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double().
The cmpxchg128() family of functions is basically & functionally
the same as cmpxchg_double(), but with a saner interface: instead
of a 6-parameter horror that forced u128 - u64/u64-halves layout
details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128 types.
- Restructure the generated atomic headers, and add
kerneldoc comments for all of the generic atomic{,64,_long}_t
operations. Generated definitions are much cleaner now,
and come with documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering
when taking multiple locks of the same type. This gets rid of
one use of lockdep_set_novalidate_class() in the bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended
variable shadowing generating garbage code on Clang on certain
ARM builds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DsYj
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
Commit e441273947 ("Documentation: raise minimum supported version of
binutils to 2.25") allows us to remove the checks for old binutils.
There is no more user for ld-ifversion. Remove it as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230119082250.151485-1-masahiroy@kernel.org
The (relatively) new KCFI feature in LLVM/Clang encodes type information
for C functions by generating symbols named __kcfi_typeid_<fname>, which
can then be referenced from assembly. However, some custom build rules
(e.g. nVHE or early PIE on arm64) use objcopy to add a prefix to all the
symbols in their object files, making mksysmap's ignore filter miss
those KCFI symbols.
Therefore, explicitly list those twice-prefixed KCFI symbols as ignored.
Alternatively, this could also be achieved in a less verbose way by
ignoring any symbol containing the string "__kcfi_typeid_". However,
listing the combined prefixes explicitly saves us from running the small
risk of ignoring symbols that should be kept.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_MODULES is disabled for ARCH=um, 'make (bin)deb-pkg' fails
with an error like follows:
cp: cannot create regular file 'debian/linux-image/usr/lib/uml/modules/6.4.0-rc2+/System.map': No such file or directory
Remove the CONFIG_MODULES check completely so ${pdir}/usr/lib/uml/modules
will always be created and modules.builtin.(modinfo) will be installed
under it for ARCH=um.
Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Even for a non-modular kernel, the kernel builds modules.builtin and
modules.builtin.modinfo, with information about the built-in modules.
Tools such as initramfs-tools need these files to build a working
initramfs on some systems, such as those requiring firmware.
Now that `make modules_install` works even in non-modular kernels and
installs these files, unconditionally invoke it when building a Debian
package.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A fairly small one in terms of feature additions. Most of the changes in
terms of lines come from the upgrade to the new version of the toolchain
(which in turn is big due to the vendored 'alloc' crate).
- Upgrade to Rust 1.68.2:
This is the first such upgrade, and we will try to update it often
from now on, in order to remain close to the latest release, until
a minimum version (which is "in the future") can be established.
The upgrade brings the stabilization of 4 features we used (and 2
more that we used in our old 'rust' branch).
Commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2") contains the
details and rationale.
- pin-init API:
Several internal improvements and fixes to the pin-init API, e.g.
allowing to use 'Self' in a struct definition with '#[pin_data]'.
- 'error' module:
New 'name()' method for the 'Error' type (with 'errname()'
integration), used to implement the 'Debug' trait for 'Error'.
Add error codes from 'include/linux/errno.h' to the list of Rust
'Error' constants.
Allow specifying error type on the 'Result' type (with the default
still being our usual 'Error' type).
- 'str' module:
'TryFrom' implementation for 'CStr', and new 'to_cstring()' method
based on it.
- 'sync' module:
Implement 'AsRef' trait for 'Arc', allowing to use 'Arc' in code that
is generic over smart pointer types.
Add 'ptr_eq' method to 'Arc' for easier, less error prone comparison
between two 'Arc' pointers.
Reword the 'Send' safety comment for 'Arc', and avoid referencing it
from the 'Sync' one.
- 'task' module:
Implement 'Send' marker for 'Task'.
- 'types' module:
Implement 'Send' and 'Sync' markers for 'ARef<T>' when 'T' is
'AlwaysRefCounted', 'Send' and 'Sync'.
- Other changes:
Documentation improvements and '.gitattributes' change to start
using the Rust diff driver.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmSPLEYACgkQGXyLc2ht
IW051BAAtffUcUsTcRrbWzyU/OoymT5MQwVgxIYhg5hTOiy0St4gwTd5F4A01S7e
s0E5io5dYiUpoImi6ALxGDL7BNawl4CKT7kZI8kZIsIz/M4+FPIsr7fboA0OXpph
chs/P6wwEOCahZNUc3IfRG4KsCr7dAUKWYuRDgRTkAt4/Qu7xTtj8w9l8XnrHkZ/
YwHRUE0A46yXPRGVHmueyBJ8SzUbP85rIaDU+kC9hoDY4SfF6F5ZxrecXJEjMbQu
YgtZDoH9u2nIc9yd7bGyOTu3hhIzs4WuPh6LoK2UdR513+A7Qoe4n59dH3pnl58C
D4CMTYEAEh4daDg40dad0Zj7/nAIjyCsitfRZ4T9ZmqTLLIiRewbnzCHfIL/XU0i
sK40ek37tVsR1pcO4EDpHs/vC51DKhfQsuKlFkW7WumshyMzCXnLP+J4PvfbjASQ
R31Exuc1f5OlB44pgblRRhlEyaelkZW5iQAZbedGWaBr3oikiwdl+gbWhfvoBXhU
Kbu4rT796Sol//wevmLx9X/ORYn8ZI2BhDQLJ2rH020BiVObi0poL9P+aJUQfPlm
uI5/Ij82aKs2mCuyy06cYEvUiSP2IbmkXFxYSPp/2vHCl0zesOI+ZFdSknSIPpLJ
Wq3PGxSR4ky7lWibY/YmpLGX1FsRUFU3fyd6cQVObpXlJO6i9F0=
=vpwH
-----END PGP SIGNATURE-----
Merge tag 'rust-6.5' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"A fairly small one in terms of feature additions. Most of the changes
in terms of lines come from the upgrade to the new version of the
toolchain (which in turn is big due to the vendored 'alloc' crate).
Upgrade to Rust 1.68.2:
- This is the first such upgrade, and we will try to update it often
from now on, in order to remain close to the latest release, until
a minimum version (which is "in the future") can be established.
The upgrade brings the stabilization of 4 features we used (and 2
more that we used in our old 'rust' branch).
Commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2") contains the
details and rationale.
pin-init API:
- Several internal improvements and fixes to the pin-init API, e.g.
allowing to use 'Self' in a struct definition with '#[pin_data]'.
'error' module:
- New 'name()' method for the 'Error' type (with 'errname()'
integration), used to implement the 'Debug' trait for 'Error'.
- Add error codes from 'include/linux/errno.h' to the list of Rust
'Error' constants.
- Allow specifying error type on the 'Result' type (with the default
still being our usual 'Error' type).
'str' module:
- 'TryFrom' implementation for 'CStr', and new 'to_cstring()' method
based on it.
'sync' module:
- Implement 'AsRef' trait for 'Arc', allowing to use 'Arc' in code
that is generic over smart pointer types.
- Add 'ptr_eq' method to 'Arc' for easier, less error prone
comparison between two 'Arc' pointers.
- Reword the 'Send' safety comment for 'Arc', and avoid referencing
it from the 'Sync' one.
'task' module:
- Implement 'Send' marker for 'Task'.
'types' module:
- Implement 'Send' and 'Sync' markers for 'ARef<T>' when 'T' is
'AlwaysRefCounted', 'Send' and 'Sync'.
Other changes:
- Documentation improvements and '.gitattributes' change to start
using the Rust diff driver"
* tag 'rust-6.5' of https://github.com/Rust-for-Linux/linux:
rust: error: `impl Debug` for `Error` with `errname()` integration
rust: task: add `Send` marker to `Task`
rust: specify when `ARef` is thread safe
rust: sync: reword the `Arc` safety comment for `Sync`
rust: sync: reword the `Arc` safety comment for `Send`
rust: sync: implement `AsRef<T>` for `Arc<T>`
rust: sync: add `Arc::ptr_eq`
rust: error: add missing error codes
rust: str: add conversion from `CStr` to `CString`
rust: error: allow specifying error type on `Result`
rust: init: update macro expansion example in docs
rust: macros: replace Self with the concrete type in #[pin_data]
rust: macros: refactor generics parsing of `#[pin_data]` into its own function
rust: macros: fix usage of `#[allow]` in `quote!`
docs: rust: point directly to the standalone installers
.gitattributes: set diff driver for Rust source code files
rust: upgrade to Rust 1.68.2
rust: arc: fix intra-doc link in `Arc<T>::init`
rust: alloc: clarify what is the upstream version
Use __attribute__((__cleanup__(func))) to build:
- simple auto-release pointers using __free()
- 'classes' with constructor and destructor semantics for
scope-based resource management.
- lock guards based on the above classes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230612093537.614161713%40infradead.org
which use it, to detect changes to it and adapt accordingly
-----BEGIN PGP SIGNATURE-----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=n42+
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Add a ORC format hash to vmlinux and modules in order for other tools
which use it, to detect changes to it and adapt accordingly
* tag 'objtool_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Add ELF section with ORC version identifier
Currently, unknown relocation types are just skipped.
The value of r_addend is only needed to get the symbol name in case
is_valid_name(elf, sym) returns false.
Even if we do not know how to calculate r_addend, we should continue.
At worst, we will get "(unknown)" as the symbol name, but it is better
than failing to detect section mismatches.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pass the Elf_Sym pointer to addend_arm_rel() as well as to
check_section_mismatch().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
All the addend_*_rel() functions calculate the instruction location in
the same way.
Factor out the similar code to the caller. Squash reloc_location() too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to each
object file, including the *.mod.o. As we filter out CC_FLAGS_CFI
for *.mod.o, the compiler won't generate type hashes for the
injected functions, and therefore indirectly calling them during
module loading trips indirect call checking.
Enabling CFI for *.mod.o isn't sufficient to fix this issue after
commit 0c3e806ec0 ("x86/cfi: Add boot time hash randomization"),
as *.mod.o aren't processed by objtool, which means any hashes
emitted there won't be randomized. Therefore, in addition to
disabling CFI for *.mod.o, also disable GCOV, as the object files
don't otherwise contain any executable code.
Fixes: cf68fffb66 ("add support for Clang CFI")
Reported-by: Joe Fradley <joefradley@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds