If the IR Toy is receiving IR while a transmit is done, it may end up
hanging. We can prevent this from happening by re-entering sample mode
just before issuing the transmit command.
Link: https://github.com/bengtmartensson/HarcHardware/discussions/25
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PQpb
-----END PGP SIGNATURE-----
Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new sensor drivers: imx335, imx412, ov9282
- new IR transmitter driver: meson-ir-tx
- handro driver gained support for H.264 for Rockchip VDPU2
- imx gained support for i.MX8MQ
- ti-vpe has gained support for other SoC variants
- lots of cleanups, fixes, board additions and doc improvements
* tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits)
media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control
media: venus: venc: Add support for intra-refresh period
media: v4l2-ctrls: Add intra-refresh period control
media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value
media: venus: helper: do not set constrained parameters for UBWC
media: venus: venc: Fix potential null pointer dereference on pointer fmt
media: venus: hfi: fix return value check in sys_get_prop_image_version()
media: tegra-cec: Handle errors of clk_prepare_enable()
media: cec-pin: rename timer overrun variables
media: TDA1997x: report -ENOLINK after disconnecting HDMI source
media: TDA1997x: fix tda1997x_query_dv_timings() return value
media: Fix cosmetic error in TDA1997x driver
media: v4l2-dv-timings.c: fix wrong condition in two for-loops
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
media: imx: imx7_mipi_csis: convert some switch cases to the default
media: imx: imx7-media-csi: Fix buffer return upon stream start failure
media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1
media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats
media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support
...
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
Turn BPF_PROG_RUN into a proper always inlined function. No functional and
performance changes are intended, but it makes it much easier to understand
what's going on with how BPF programs are actually get executed. It's more
obvious what types and callbacks are expected. Also extra () around input
parameters can be dropped, as well as `__` variable prefixes intended to avoid
naming collisions, which makes the code simpler to read and write.
This refactoring also highlighted one extra issue. BPF_PROG_RUN is both
a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning
BPF_PROG_RUN into a function causes naming conflict compilation error. So
rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to
bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of
BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org
This patch adds the driver for Amlogic Meson IR transmitter.
Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
(also called blaster) controller onboard. It is capable of sending
IR signals with arbitrary carrier frequency and duty cycle.
The driver supports 2 modulation clock sources:
- xtal3 clock (xtal divided by 3)
- 1us clock
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The s_learning_mode() function is called in response to the ioctl
LIRC_SET_WIDEBAND_RECEIVER, so rename it to s_wideband_receiver().
Learning mode is when both the wideband receiver is turned on and
carrier reports are enabled.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Any timeout larger than LIRC_VALUE_MASK cannot work for the lirc uapi.
LIRC_VALUE_MASK is about 16 seconds which is more than enough.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When carrier reports are enabled, send them over loopback.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters
if an invalid list was set.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
deleted the repeated word 'the' in the comments.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to
see how many entries user space provided and return ENOSPC if there are
more programs than that. Before this patch, this is not checked and
ENOSPC is never returned.
Note that one lirc device is limited to 64 bpf programs, and user space
I'm aware of -- ir-keytable -- always gives enough space for 64 entries
already. However, we should not copy program ids than are requested.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210623213754.632-1-sean@mess.org
Use DEVICE_ATTR_RW() helper macro instead of DEVICE_ATTR(), which is
simpler and more readable.
Due to the names of the read and write functions of the sysfs attribute is
normalized, there is a natural association.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This is an NEC remote control device shipped with some Toshiba TVs.
Signed-off-by: Alexander Voronov <avv.0@ya.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hadle errors of clk_prepare_enable() in st_rc_hardware_init() and its
callers.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of using U+2013 ('–'): EN DASH, let's just use an
hyphen there, as this was probably introduced by some cut-and-paste
from some other place.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
I came across a randconfig build failure from one driver
that only depends on CONFIG_USB_ARCH_HAS_HCD but fails when
built without CONFIG_USB:
ld: drivers/media/rc/ir_toy.o: in function `irtoy_disconnect':
ir_toy.c:(.text+0x24): undefined reference to `usb_kill_urb'
ld: ir_toy.c:(.text+0x2c): undefined reference to `usb_free_urb'
ld: ir_toy.c:(.text+0x34): undefined reference to `usb_kill_urb'
ld: ir_toy.c:(.text+0x3c): undefined reference to `usb_free_urb'
Upon a closer look, I find that a lot of the other drivers
'select USB' rather than stating 'depends on USB' as is common
for most subsystems. I also find that all except one driver
have an extra 'depends on RC_CORE' that is already implied by
the top-level 'if RC_CORE' check.
Clean up both by reducing the dependencies to the required set.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The tango platform was removed, so the driver is no longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Asus PN50 has 16 byte io region for the ITE8708 in its DSDT, which
causes the probe fail. So, accept larger regions.
Link: https://www.spinics.net/lists/linux-media/msg177725.html
Cc: Nikolaos Beredimas <beredim@gmail.com>
Reported-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add keymaps and bindings for the simple IR (NEC) remotes used with
the MeCool KII-Pro and MeCool KIII-Pro Android STB devices.
Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the following trivial warnings w.r.t. kernel-doc usage:
drivers/media/common/videobuf2/frame_vector.c:38: warning: Excess function parameter 'gup_flags' description in 'get_vaddr_frames'
drivers/media/dvb-core/dvb_ca_en50221.c:193: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1014: warning: expecting prototype for Wake up the DVB CA thread(). Prototype was for
dvb_ca_en50221_thread_wakeup() instead
drivers/media/dvb-core/dvb_ca_en50221.c:1023: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1081: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1112: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1327: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1411: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1426: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1582: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1693: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1743: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1772: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1830: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1922: warning: wrong kernel-doc identifier on line:
drivers/media/rc/img-ir/img-ir-hw.c:628: warning: expecting prototype for img_ir_decoder_compatable(). Prototype was for
img_ir_decoder_compatible() instead
drivers/media/v4l2-core/v4l2-jpeg.c:461: warning: expecting prototype for jpeg_parse_header(). Prototype was for v4l2_jpeg_parse_header()
instead
drivers/media/platform/vsp1/vsp1_dl.c:166: warning: expecting prototype for struct vsp1_cmd_pool. Prototype was for struct vsp1_dl_cmd_pool
instead
drivers/media/platform/mtk-vpu/mtk_vpu.c:28: warning: expecting prototype for is a tiny processor controlling video hardware(). Prototype
was for INIT_TIMEOUT_MS() instead
drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c:73: warning: expecting prototype for struct vp9_fb_info. Prototype was for struct
vp9_ref_buf instead
drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c:85: warning: expecting prototype for struct vp9_fb_info. Prototype was for struct
vp9_sf_ref_fb instead
drivers/media/tuners/mt2063.c:1404: warning: expecting prototype for fLO_FractionalTerm(). Prototype was for MT2063_fLO_FractionalTerm() instead
drivers/media/tuners/mt2063.c:1465: warning: expecting prototype for CalcLO2Mult(). Prototype was for MT2063_CalcLO2Mult() instead
drivers/media/usb/pwc/pwc-dec23.c:640: warning: wrong kernel-doc identifier on line:
drivers/media/platform/exynos4-is/media-dev.c:820: warning: expecting prototype for __fimc_md_create_fimc_links(). Prototype was for
__fimc_md_create_fimc_sink_links() instead
drivers/media/i2c/s5k6aa.c:426: warning: expecting prototype for s5k6aa_configure_pixel_clock(). Prototype was for
s5k6aa_configure_pixel_clocks() instead
drivers/media/i2c/imx274.c:700: warning: wrong kernel-doc identifier on line:
drivers/media/i2c/imx274.c:735: warning: wrong kernel-doc identifier on line:
drivers/media/i2c/imx274.c:983: warning: wrong kernel-doc identifier on line:
Most are missing or mistyped function names.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Captured using a raw IR receiver. Manual linked in the remote definition
itself.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a keymap and bindings for the simple IR (NEC) remote used with
Minix 'NEO' branded Android STB devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The in_use variable is set to true when a lirc file is opened, and ir
transmit can only be done by writing to a lirc file descriptor. As a
result when in_use is read, it is always true, so we might as well remove
it.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The carrier, duty cycle etc are not device dependent, and they can be
changed at runtime. By moving them into the allocated struct, we can make
the device specific structures smaller, and we no longer need to copy
the struct.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The lirc ioctls should be used for this, not module parameters.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove lots of superfluous debug messages which just log the function
name. Also, there is no need to announce the various parameters of the
device. This can be discovered via lirc ioctl if needed.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This ensure that the rc device shows up correctly in sysfs.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It is redundant to do irqsave and irqrestore in hardIRQ context.
Signed-off-by: Daode Huang <huangdaode@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The rc-cec keymap is unusual in that it can't be built as a module,
instead it is registered directly in rc-main.c if CONFIG_MEDIA_CEC_RC
is set. This is because it can be called from drm_dp_cec_set_edid() via
cec_register_adapter() in an asynchronous context, and it is not
allowed to use request_module() to load rc-cec.ko in that case. Trying to
do so results in a 'WARN_ON_ONCE(wait && current_is_async())'.
Since this keymap is only used if CONFIG_MEDIA_CEC_RC is set, we
just compile this keymap into the rc-core module and never as a
separate module.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 2c6d1fffa1 (drm: add support for DisplayPort CEC-Tunneling-over-AUX)
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A number of remote control drivers require the bitreverse
helper, and run into a link error when it is disabled:
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_scancode':
img-ir-nec.c:(.text+0x10c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_filter':
img-ir-nec.c:(.text+0x2dc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/cx231xx/cx231xx-input.o: in function `get_key_isdbt':
cx231xx-input.c:(.text+0x38c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/em28xx/em28xx-input.o: in function `em28xx_get_key_em_haup':
em28xx-input.c:(.text+0x1704): undefined reference to `byte_rev_table'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
prescaler larger than 8 would mean the carrier is at most 152Hz,
which does not make sense for IR carriers.
Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To save power, gate/reset the hardware block while the system is
asleep or powered off.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation for adding suspend/resume hooks, factor out the hardware
initialization from the driver probe/remove functions.
The timeout programmed during init is taken from the `struct rc_dev` so
it is maintained across an exit/init cycle.
This resolves some trivial issues with the probe function: throwing away
the error from clk_prepare_enable and using the wrong type for the
temporary register value.
It also fixes the order of the remove function to unregister the RC
device before turning off the hardware. This prevents userspace from
triggering register writes (via LIRC_SET_REC_TIMEOUT) while the hardware
is disabled.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Only one register, SUNXI_IR_CIR_REG, is accessed from outside the
interrupt handler, and that register is not accessed from inside it.
As there is no overlap between different contexts, no lock is needed.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The register writes during driver removal occur after the device is
already put back in reset, so they never had any effect.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When processing a MCE_RSP_GETPORTSTATUS command, the bit index to set in
ir->txports_cabled comes from response data, and isn't validated.
As ir->txports_cabled is a u8, nothing should be done if the bit index
is greater than 7.
Cc: stable@vger.kernel.org
Reported-by: syzbot+ec3b3128c576e109171d@syzkaller.appspotmail.com
Signed-off-by: James Reynolds <jr@memlen.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This device is also supported.
Cc: stable@vger.kernel.org
Tested-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 528222d853 ("media: rc: harmonize infrared durations to
microseconds") missed to switch the min_timeout calculation from ns
to us. This resulted in a minimum timeout of 1.2 seconds instead of 1.2ms,
leading to large delays and long key repeats.
Fix this by applying proper ns->us conversion.
Cc: stable@vger.kernel.org
Fixes: 528222d853 ("media: rc: harmonize infrared durations to microseconds")
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 528222d853 ("media: rc: harmonize infrared durations to
microseconds") missed to switch some timeout calculations from
nanoseconds to microseconds. This resulted in spurious key_up+key_down
events at the last scancode if the rc device uses a long timeout
(eg 100ms on nuvoton-cir) as the device timeout wasn't properly
accounted for in the keyup timeout calculation.
Fix this by applying the proper conversion functions.
Cc: stable@vger.kernel.org
Fixes: 528222d853 ("media: rc: harmonize infrared durations to microseconds")
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is a race condition where if the /sys/class/rc0/uevent file is read
before rc_dev->registered is set to true, -ENODEV will be returned.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901089
Cc: stable@vger.kernel.org
Fixes: a2e2d73fa2 ("media: rc: do not access device via sysfs after rc_unregister_device()")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young