Fix sparse warnings:
arch/powerpc/platforms/pseries/rtas-fadump.c:250:6: warning:
symbol 'rtas_fadump_set_regval' was not declared. Should it be static?
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408062012.85973-1-pulehui@huawei.com
flush_dcache_page() is only a few lines, it is worth
inlining.
ia64, csky, mips, openrisc and riscv have a similar
flush_dcache_page() and inline it.
On pmac32_defconfig, we get a small size reduction.
On ppc64_defconfig, we get a very small size increase.
In both case that's in the noise (less than 0.1%).
text data bss dec hex filename
18991155 5934744 1497624 26423523 19330e3 vmlinux64.before
18994829 59367321497624 26429185 1934701 vmlinux64.after
9150963 2467502 184548 11803013 b41985 vmlinux32.before
91496892467302 184548 11801539 b413c3 vmlinux32.after
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/21c417488b70b7629dae316539fb7bb8bdef4fdd.1617895813.git.christophe.leroy@csgroup.eu
__flush_dcache_icache() is usable for non HIGHMEM pages on
every platform.
It is only for HIGHMEM pages that BOOKE needs kmap() and
BOOK3S needs flush_dcache_icache_phys().
So make flush_dcache_icache_phys() dependent on CONFIG_HIGHMEM and
call it only when it is a HIGHMEM page.
We could make flush_dcache_icache_phys() available at all time,
but as it is declared NOKPROBE_SYMBOL(), GCC doesn't optimise
it out when it is not used.
So define a stub for !CONFIG_HIGHMEM in order to remove the #ifdef in
flush_dcache_icache_page() and use IS_ENABLED() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/79ed5d7914f497cd5fcd681ca2f4d50a91719455.1617895813.git.christophe.leroy@csgroup.eu
flush_dcache_icache_hugepage() is a static function, with
only one caller. That caller calls it when PageCompound() is true,
so bugging on !PageCompound() is useless if we can trust the
compiler a little. Remove the BUG_ON(!PageCompound()).
The number of elements of a page won't change over time, but
GCC doesn't know about it, so it gets the value at every iteration.
To avoid that, call compound_nr() outside the loop and save it in
a local variable.
Whether the page is a HIGHMEM page or not doesn't change over time.
But GCC doesn't know it so it does the test on every iteration.
Do the test outside the loop.
When the page is not a HIGHMEM page, page_address() will fallback on
lowmem_page_address(), so call lowmem_page_address() directly and
don't suffer the call to page_address() on every iteration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ab03712b70105fccfceef095aa03007de9295a40.1617895813.git.christophe.leroy@csgroup.eu
flush_coherent_icache() doesn't need the address anymore,
so it can be called immediately when entering the public
functions and doesn't need to be disseminated among
lower level functions.
And use page_to_phys() instead of open coding the calculation
of phys address to call flush_dcache_icache_phys().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5f063986e325d2efdd404b8f8c5f4bcbd4eb11a6.1617895813.git.christophe.leroy@csgroup.eu
The sparse tool complains as follows:
arch/powerpc/platforms/powernv/opal-core.c:74:16: warning:
symbol 'mpipl_kobj' was not declared.
This symbol is not used outside of opal-core.c, so marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409063855.57347-1-cuibixuan@huawei.com
Fix sparse warning:
arch/powerpc/xmon/xmon.c:4216:1: warning:
symbol 'spu_inst_dump' was not declared. Should it be static?
This symbol is not used outside of xmon.c, so make it static.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409070151.163424-1-pulehui@huawei.com
The sparse tool complains as follows:
arch/powerpc/perf/hv-24x7.c:229:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_flags' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:230:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_err' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:236:1: warning:
symbol '__pcpu_scope_hv_24x7_hw' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:244:1: warning:
symbol '__pcpu_scope_hv_24x7_reqb' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:245:1: warning:
symbol '__pcpu_scope_hv_24x7_resb' was not declared. Should it be static?
This symbol is not used outside of hv-24x7.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090124.59492-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/perf/isa207-common.c:24:18: warning:
symbol 'isa207_pmu_format_attr' was not declared. Should it be static?
This symbol is not used outside of isa207-common.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090119.59444-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/pmem.c:142:27: warning:
symbol 'drc_pmem_match' was not declared. Should it be static?
This symbol is not used outside of pmem.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090114.59396-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/hvCall_inst.c:29:1: warning:
symbol '__pcpu_scope_hcall_stats' was not declared. Should it be static?
This symbol is not used outside of hvCall_inst.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090109.59347-1-cuibixuan@huawei.com
According to LoPAR, ibm,query-pe-dma-window output named "IO Page Sizes"
will let the OS know all possible pagesizes that can be used for creating a
new DDW.
Currently Linux will only try using 3 of the 8 available options:
4K, 64K and 16M. According to LoPAR, Hypervisor may also offer 32M, 64M,
128M, 256M and 16G.
Enabling bigger pages would be interesting for direct mapping systems
with a lot of RAM, while using less TCE entries.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408201915.174217-1-leobras.c@gmail.com
Many architectures duplicate similar shell scripts.
This commit converts powerpc to use scripts/syscallhdr.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301153019.362742-2-masahiroy@kernel.org
Many architectures duplicate similar shell scripts.
This commit converts powerpc to use scripts/syscalltbl.sh. This also
unifies syscall_table_32.h and syscall_table_c32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301153019.362742-1-masahiroy@kernel.org
RTAS_RMOBUF_MAX doesn't actually describe a "maximum" value in any
sense. It represents the size of an area of memory set aside for user
space to use as work areas for certain RTAS calls.
Rename it to RTAS_USER_REGION_SIZE.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-6-nathanl@linux.ibm.com
Reduce conditionally compiled sections within rtas_initialize() by
moving the filter table initialization into its own function already
guarded by CONFIG_PPC_RTAS_FILTER. No behavior change intended.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-5-nathanl@linux.ibm.com
There's not a compelling reason to cache the value of the token for
the ibm,suspend-me function. Just look it up when needed in the RTAS
syscall's special case for it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-4-nathanl@linux.ibm.com
Add kerneldoc for ppc_rtas_rmo_buf_show(), the callback for
/proc/powerpc/rtas/rmo_buffer, explaining its expected use.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-2-nathanl@linux.ibm.com
During the EEH MMIO error checking, the current implementation fails to map
the (virtual) MMIO address back to the pci device on radix with hugepage
mappings for I/O. This results into failure to dispatch EEH event with no
recovery even when EEH capability has been enabled on the device.
eeh_check_failure(token) # token = virtual MMIO address
addr = eeh_token_to_phys(token);
edev = eeh_addr_cache_get_dev(addr);
if (!edev)
return 0;
eeh_dev_check_failure(edev); <= Dispatch the EEH event
In case of hugepage mappings, eeh_token_to_phys() has a bug in virt -> phys
translation that results in wrong physical address, which is then passed to
eeh_addr_cache_get_dev() to match it against cached pci I/O address ranges
to get to a PCI device. Hence, it fails to find a match and the EEH event
never gets dispatched leaving the device in failed state.
The commit 3343962068 ("powerpc/eeh: Handle hugepages in ioremap space")
introduced following logic to translate virt to phys for hugepage mappings:
eeh_token_to_phys():
+ pa = pte_pfn(*ptep);
+
+ /* On radix we can do hugepage mappings for io, so handle that */
+ if (hugepage_shift) {
+ pa <<= hugepage_shift; <= This is wrong
+ pa |= token & ((1ul << hugepage_shift) - 1);
+ }
This patch fixes the virt -> phys translation in eeh_token_to_phys()
function.
$ cat /sys/kernel/debug/powerpc/eeh_address_cache
mem addr range [0x0000040080000000-0x00000400807fffff]: 0030:01:00.1
mem addr range [0x0000040080800000-0x0000040080ffffff]: 0030:01:00.1
mem addr range [0x0000040081000000-0x00000400817fffff]: 0030:01:00.0
mem addr range [0x0000040081800000-0x0000040081ffffff]: 0030:01:00.0
mem addr range [0x0000040082000000-0x000004008207ffff]: 0030:01:00.1
mem addr range [0x0000040082080000-0x00000400820fffff]: 0030:01:00.0
mem addr range [0x0000040082100000-0x000004008210ffff]: 0030:01:00.1
mem addr range [0x0000040082110000-0x000004008211ffff]: 0030:01:00.0
Above is the list of cached io address ranges of pci 0030:01:00.<fn>.
Before this patch:
Tracing 'arg1' of function eeh_addr_cache_get_dev() during error injection
clearly shows that 'addr=' contains wrong physical address:
kworker/u16:0-7 [001] .... 108.883775: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x80103000a510
dmesg shows no EEH recovery messages:
[ 108.563768] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x9ae) != mcp_pulse (0x7fff)
[ 108.563788] bnx2x: [bnx2x_hw_stats_update:870(eth2)]NIG timer max (4294967295)
[ 108.883788] bnx2x: [bnx2x_acquire_hw_lock:2013(eth1)]lock_status 0xffffffff resource_bit 0x1
[ 108.884407] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
[ 108.884976] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
<..>
After this patch:
eeh_addr_cache_get_dev() trace shows correct physical address:
<idle>-0 [001] ..s. 1043.123828: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x40080bc7cd8
dmesg logs shows EEH recovery getting triggerred:
[ 964.323980] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x746f) != mcp_pulse (0x7fff)
[ 964.323991] EEH: Recovering PHB#30-PE#10000
[ 964.324002] EEH: PE location: N/A, PHB location: N/A
[ 964.324006] EEH: Frozen PHB#30-PE#10000 detected
<..>
Fixes: 3343962068 ("powerpc/eeh: Handle hugepages in ioremap space")
Cc: stable@vger.kernel.org # v5.3+
Reported-by: Dominic DeMarco <ddemarc@us.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161821396263.48361.2796709239866588652.stgit@jupiter
Instead of calling irq_create_mapping() to map the IPI for a node,
introduce an 'alloc' handler. This is usually an extension to support
hierarchy irq_domains which is not exactly the case for XIVE-IPI
domain. However, we can now use the irq_domain_alloc_irqs() routine
which allocates the IRQ descriptor on the specified node, even better
for cache performance on multi node machines.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-10-clg@kaod.org
ipistorm [*] can be used to benchmark the raw interrupt rate of an
interrupt controller by measuring the number of IPIs a system can
sustain. When applied to the XIVE interrupt controller of POWER9 and
POWER10 systems, a significant drop of the interrupt rate can be
observed when crossing the second node boundary.
This is due to the fact that a single IPI interrupt is used for all
CPUs of the system. The structure is shared and the cache line updates
impact greatly the traffic between nodes and the overall IPI
performance.
As a workaround, the impact can be reduced by deactivating the IRQ
lockup detector ("noirqdebug") which does a lot of accounting in the
Linux IRQ descriptor structure and is responsible for most of the
performance penalty.
As a fix, this proposal allocates an IPI interrupt per node, to be
shared by all CPUs of that node. It solves the scaling issue, the IRQ
lockup detector still has an impact but the XIVE interrupt rate scales
linearly. It also improves the "noirqdebug" case as showed in the
tables below.
* P9 DD2.2 - 2s * 64 threads
"noirqdebug"
Mint/s Mint/s
chips cpus IPI/sys IPI/chip IPI/chip IPI/sys
--------------------------------------------------------------
1 0-15 4.984023 4.875405 4.996536 5.048892
0-31 10.879164 10.544040 10.757632 11.037859
0-47 15.345301 14.688764 14.926520 15.310053
0-63 17.064907 17.066812 17.613416 17.874511
2 0-79 11.768764 21.650749 22.689120 22.566508
0-95 10.616812 26.878789 28.434703 28.320324
0-111 10.151693 31.397803 31.771773 32.388122
0-127 9.948502 33.139336 34.875716 35.224548
* P10 DD1 - 4s (not homogeneous) 352 threads
"noirqdebug"
Mint/s Mint/s
chips cpus IPI/sys IPI/chip IPI/chip IPI/sys
--------------------------------------------------------------
1 0-15 2.409402 2.364108 2.383303 2.395091
0-31 6.028325 6.046075 6.089999 6.073750
0-47 8.655178 8.644531 8.712830 8.724702
0-63 11.629652 11.735953 12.088203 12.055979
0-79 14.392321 14.729959 14.986701 14.973073
0-95 12.604158 13.004034 17.528748 17.568095
2 0-111 9.767753 13.719831 19.968606 20.024218
0-127 6.744566 16.418854 22.898066 22.995110
0-143 6.005699 19.174421 25.425622 25.417541
0-159 5.649719 21.938836 27.952662 28.059603
0-175 5.441410 24.109484 31.133915 31.127996
3 0-191 5.318341 24.405322 33.999221 33.775354
0-207 5.191382 26.449769 36.050161 35.867307
0-223 5.102790 29.356943 39.544135 39.508169
0-239 5.035295 31.933051 42.135075 42.071975
0-255 4.969209 34.477367 44.655395 44.757074
4 0-271 4.907652 35.887016 47.080545 47.318537
0-287 4.839581 38.076137 50.464307 50.636219
0-303 4.786031 40.881319 53.478684 53.310759
0-319 4.743750 43.448424 56.388102 55.973969
0-335 4.709936 45.623532 59.400930 58.926857
0-351 4.681413 45.646151 62.035804 61.830057
[*] https://github.com/antonblanchard/ipistorm
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-9-clg@kaod.org
When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.
Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.
Fixes: 97ef275077 ("powerpc/xive: Fix xmon support on the PowerNV platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org
Move the xmon routine under XIVE subsystem and rework the loop on the
interrupts taking into account the xive_irq_domain to filter out IPIs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-7-clg@kaod.org
When looping on IRQ descriptor, irq_data is always valid.
Fixes: 930914b7d5 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-6-clg@kaod.org
Now that the IPI interrupt has its own domain, the checks on the HW
interrupt number XIVE_IPI_HW_IRQ and on the chip can be replaced by a
check on the domain.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-5-clg@kaod.org
The IPI interrupt has its own domain now. Testing the HW interrupt
number is not needed anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-4-clg@kaod.org
The IPI interrupt is a special case of the XIVE IRQ domain. When
mapping and unmapping the interrupts in the Linux interrupt number
space, the HW interrupt number 0 (XIVE_IPI_HW_IRQ) is checked to
distinguish the IPI interrupt from other interrupts of the system.
Simplify the XIVE interrupt domain by introducing a specific domain
for the IPI.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-3-clg@kaod.org
The sparse tool complains as follows:
arch/powerpc/kernel/smp.c:86:1: warning:
symbol '__pcpu_scope_cpu_coregroup_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:125:1: warning:
symbol '__pcpu_scope_thread_group_l1_cache_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:132:1: warning:
symbol '__pcpu_scope_thread_group_l2_cache_map' was not declared. Should it be static?
These symbols are not used outside of smp.c, so this
commit marks them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125903.4139663-1-yukuai3@huawei.com
The sparse tool complains as follows:
arch/powerpc/kernel/mce.c:43:1: warning:
symbol 'mce_ue_event_work' was not declared. Should it be static?
This symbol is not used outside of mce.c, so this commit marks it
static.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408035802.31853-1-lihuafei1@huawei.com
The sparse tool complains as follows:
arch/powerpc/kernel/security.c:253:6: warning:
symbol 'stf_barrier' was not declared. Should it be static?
This symbol is not used outside of security.c, so this commit marks it
static.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408033951.28369-1-lihuafei1@huawei.com
On book3s/32, the segment below kernel text is used for module
allocation when CONFIG_STRICT_KERNEL_RWX is defined.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, use that segment below PAGE_OFFSET at all time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a46dcdd39a9e80b012d86c294c4e5cd8d31665f3.1617283827.git.christophe.leroy@csgroup.eu
On the 8xx, TASK_SIZE is 0x80000000. The space between TASK_SIZE
and PAGE_OFFSET is not used.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, define MODULES_VADDR and MODULES_END.
Set a 256Mb area just below PAGE_OFFSET, like book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a225606d5b3a8bc53fe612ad52c855c60b0a0a58.1617283827.git.christophe.leroy@csgroup.eu
On book3s/32, when STRICT_KERNEL_RWX is selected, modules are
allocated on the segment just before kernel text, ie on the
0xb0000000-0xbfffffff when PAGE_OFFSET is 0xc0000000.
On the 8xx, TASK_SIZE is 0x80000000. The space between TASK_SIZE and
PAGE_OFFSET is not used and could be used for modules.
The idea comes from ARM architecture.
Having modules just below PAGE_OFFSET offers an opportunity to
minimise the distance between kernel text and modules and avoid
trampolines in modules to access kernel functions or other module
functions.
When MODULES_VADDR is defined, powerpc has it's own module_alloc()
function. In that function, first try to allocate the module
above the limit defined by '_etext - 32M'. Then if the allocation
fails, fallback to the entire MODULES area.
DEBUG logs in module_32.c without the patch:
[ 1572.588822] module_32: Applying ADD relocate section 13 to 12
[ 1572.588891] module_32: Doing plt for call to 0xc00671a4 at 0xcae04024
[ 1572.588964] module_32: Initialized plt for 0xc00671a4 at cae04000
[ 1572.589037] module_32: REL24 value = CAE04000. location = CAE04024
[ 1572.589110] module_32: Location before: 48000001.
[ 1572.589171] module_32: Location after: 4BFFFFDD.
[ 1572.589231] module_32: ie. jump to 03FFFFDC+CAE04024 = CEE04000
[ 1572.589317] module_32: Applying ADD relocate section 15 to 14
[ 1572.589386] module_32: Doing plt for call to 0xc00671a4 at 0xcadfc018
[ 1572.589457] module_32: Initialized plt for 0xc00671a4 at cadfc000
[ 1572.589529] module_32: REL24 value = CADFC000. location = CADFC018
[ 1572.589601] module_32: Location before: 48000000.
[ 1572.589661] module_32: Location after: 4BFFFFE8.
[ 1572.589723] module_32: ie. jump to 03FFFFE8+CADFC018 = CEDFC000
With the patch:
[ 279.404671] module_32: Applying ADD relocate section 13 to 12
[ 279.404741] module_32: REL24 value = C00671B4. location = BF808024
[ 279.404814] module_32: Location before: 48000001.
[ 279.404874] module_32: Location after: 4885F191.
[ 279.404933] module_32: ie. jump to 0085F190+BF808024 = C00671B4
[ 279.405016] module_32: Applying ADD relocate section 15 to 14
[ 279.405085] module_32: REL24 value = C00671B4. location = BF800018
[ 279.405156] module_32: Location before: 48000000.
[ 279.405215] module_32: Location after: 4886719C.
[ 279.405275] module_32: ie. jump to 0086719C+BF800018 = C00671B4
We see that with the patch, no plt entries are set.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c3d5cb8a4dfdf6ca1b8aeb385c01470d6628d55.1617283827.git.christophe.leroy@csgroup.eu
While removing large number of mappings from hash page tables for
large memory systems as soft-lockup is reported because of the time
spent inside htap_remove_mapping() like one below:
watchdog: BUG: soft lockup - CPU#8 stuck for 23s!
<snip>
NIP plpar_hcall+0x38/0x58
LR pSeries_lpar_hpte_invalidate+0x68/0xb0
Call Trace:
0x1fffffffffff000 (unreliable)
pSeries_lpar_hpte_removebolted+0x9c/0x230
hash__remove_section_mapping+0xec/0x1c0
remove_section_mapping+0x28/0x3c
arch_remove_memory+0xfc/0x150
devm_memremap_pages_release+0x180/0x2f0
devm_action_release+0x30/0x50
release_nodes+0x28c/0x300
device_release_driver_internal+0x16c/0x280
unbind_store+0x124/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd4/0x270
ksys_write+0xdc/0x130
system_call+0x5c/0x70
Fix this by adding a cond_resched() to the loop in
htap_remove_mapping() that issues hcall to remove hpte mapping. The
call to cond_resched() is issued every HZ jiffies which should prevent
the soft-lockup from being reported.
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404163148.321346-1-vaibhav@linux.ibm.com
Add support for ND_REGION_ASYNC capability if the device tree
indicates 'ibm,hcall-flush-required' property in the NVDIMM node.
Flush is done by issuing H_SCM_FLUSH hcall to the hypervisor.
If the flush request failed, the hypervisor is expected to
to reflect the problem in the subsequent nvdimm H_SCM_HEALTH call.
This patch prevents mmap of namespaces with MAP_SYNC flag if the
nvdimm requires an explicit flush[1].
References:
[1] https://github.com/avocado-framework-tests/avocado-misc-tests/blob/master/memory/ndctl.py.data/map_sync.c
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use unsigned long / long instead of uint64_t/int64_t]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
But this will only work with platform devices. It will not work with
PCI devices (e.g. of an integrated root complex) and esp. not with DSA
ports.
There is an of_* variant of the nvmem binding which works without
devices. The returned data of a nvmem_cell_read() has to be freed after
use. On the other hand the return of_get_mac_address() points to some
static data without a lifetime. The trick for now, was to allocate a
device resource managed buffer which is then returned. This will only
work if we have an actual device.
Change it, so that the caller of of_get_mac_address() has to supply a
buffer where the MAC address is written to. Unfortunately, this will
touch all drivers which use the of_get_mac_address().
Usually the code looks like:
const char *addr;
addr = of_get_mac_address(np);
if (!IS_ERR(addr))
ether_addr_copy(ndev->dev_addr, addr);
This can then be simply rewritten as:
of_get_mac_address(np, ndev->dev_addr);
Sometimes is_valid_ether_addr() is used to test the MAC address.
of_get_mac_address() already makes sure, it just returns a valid MAC
address. Thus we can just test its return code. But we have to be
careful if there are still other sources for the MAC address before the
of_get_mac_address(). In this case we have to keep the
is_valid_ether_addr() call.
The following coccinelle patch was used to convert common cases to the
new style. Afterwards, I've manually gone over the drivers and fixed the
return code variable: either used a new one or if one was already
available use that. Mansour Moufid, thanks for that coccinelle patch!
<spml>
@a@
identifier x;
expression y, z;
@@
- x = of_get_mac_address(y);
+ x = of_get_mac_address(y, z);
<...
- ether_addr_copy(z, x);
...>
@@
identifier a.x;
@@
- if (<+... x ...+>) {}
@@
identifier a.x;
@@
if (<+... x ...+>) {
...
}
- else {}
@@
identifier a.x;
expression e;
@@
- if (<+... x ...+>@e)
- {}
- else
+ if (!(e))
{...}
@@
expression x, y, z;
@@
- x = of_get_mac_address(y, z);
+ of_get_mac_address(y, z);
... when != x
</spml>
All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
compile-time tested.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing fault exit label in unsafe_copy_from_user() in order to
avoid following build failure with CONFIG_SPE
CC arch/powerpc/kernel/signal_32.o
arch/powerpc/kernel/signal_32.c: In function 'restore_user_regs':
arch/powerpc/kernel/signal_32.c:565:36: error: macro "unsafe_copy_from_user" requires 4 arguments, but only 3 given
565 | ELF_NEVRREG * sizeof(u32));
| ^
In file included from ./include/linux/uaccess.h:11,
from ./include/linux/sched/task.h:11,
from ./include/linux/sched/signal.h:9,
from ./include/linux/rcuwait.h:6,
from ./include/linux/percpu-rwsem.h:7,
from ./include/linux/fs.h:33,
from ./include/linux/huge_mm.h:8,
from ./include/linux/mm.h:707,
from arch/powerpc/kernel/signal_32.c:17:
./arch/powerpc/include/asm/uaccess.h:428: note: macro "unsafe_copy_from_user" defined here
428 | #define unsafe_copy_from_user(d, s, l, e) \
|
arch/powerpc/kernel/signal_32.c:564:3: error: 'unsafe_copy_from_user' undeclared (first use in this function); did you mean 'raw_copy_from_user'?
564 | unsafe_copy_from_user(current->thread.evr, &sr->mc_vregs,
| ^~~~~~~~~~~~~~~~~~~~~
| raw_copy_from_user
arch/powerpc/kernel/signal_32.c:564:3: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/powerpc/kernel/signal_32.o] Error 1
Fixes: 627b72bee8 ("powerpc/signal32: Convert restore_[tm]_user_regs() to user access block")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aad2cb1801a3cc99bc27081022925b9fc18a0dfb.1618159169.git.christophe.leroy@csgroup.eu
Rather than clear the HV bit from the MSR at guest entry, make it clear
that the hypervisor does not allow the guest to set the bit.
The HV clear is kept in guest entry for now, but a future patch will
warn if it is set.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-13-npiggin@gmail.com
Rather than add the ME bit to the MSR at guest entry, make it clear
that the hypervisor does not allow the guest to clear the bit.
The ME set is kept in guest entry for now, but a future patch will
warn if it's not present.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-12-npiggin@gmail.com
The code being executed in KVM_GUEST_MODE_SKIP is hypervisor code with
MSR[IR]=0, so the faults of concern are the d-side ones caused by access
to guest context by the hypervisor.
Instruction breakpoint interrupts are not a concern here. It's unlikely
any good would come of causing breaks in this code, but skipping the
instruction that caused it won't help matters (e.g., skip the mtmsr that
sets MSR[DR]=0 or clears KVM_GUEST_MODE_SKIP).
[Paul notes: "the 0x1300 interrupt was dropped from the architecture a
long time ago and is not generated by P7, P8, P9 or P10." So add a
comment about this in the handler code while we're here. ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-11-npiggin@gmail.com
Cell does not support KVM.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-10-npiggin@gmail.com
This config option causes the warning in init_default_hcalls to fire
because the TCE handlers are in the default hcall list but not
implemented.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-9-npiggin@gmail.com
The va argument is not used in the function or set by its asm caller,
so remove it to be safe.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-8-npiggin@gmail.com
This SPR is set to 0 twice when exiting the guest.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-7-npiggin@gmail.com
Prevent radix guests setting LPCR[TC]. This bit only applies to hash
partitions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-6-npiggin@gmail.com
These are already disallowed by H_SET_MODE from the guest, also disallow
these by updating LPCR directly.
AIL modes can affect the host interrupt behaviour while the guest LPCR
value is set, so filter it here too.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-5-npiggin@gmail.com
Guest LPCR depends on hardware type, and future changes will add
restrictions based on errata and guest MMU mode. Move this logic
to a common function and use it for the cases where the guest
wants to update its LPCR (or the LPCR of a nested guest).
This also adds a warning in other places that set or update LPCR
if we try to set something that would have been disallowed by
the filter, as a sanity check.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-4-npiggin@gmail.com
This will get a bit more complicated in future patches. Move it
into the helper function.
This change allows the L1 hypervisor to determine some of the LPCR
bits that the L0 is using to run it, which could be a privilege
violation (LPCR is HV-privileged), although the same problem exists
now for HFSCR for example. Discussion of the HV privilege issue is
ongoing and can be resolved with a later change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-3-npiggin@gmail.com
The host CTRL (runlatch) value is not restored after guest exit. The
host CTRL should always be 1 except in CPU idle code, so this can result
in the host running with runlatch clear, and potentially switching to
a different vCPU which then runs with runlatch clear as well.
This has little effect on P9 machines, CTRL is only responsible for some
PMU counter logic in the host and so other than corner cases of software
relying on that, or explicitly reading the runlatch value (Linux does
not appear to be affected but it's possible non-Linux guests could be),
there should be no execution correctness problem, though it could be
used as a covert channel between guests.
There may be microcontrollers, firmware or monitoring tools that sample
the runlatch value out-of-band, however since the register is writable
by guests, these values would (should) not be relied upon for correct
operation of the host, so suboptimal performance or incorrect reporting
should be the worst problem.
Fixes: 95a6432ce9 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-2-npiggin@gmail.com
For unknown reason, old commit d27dfd388715 ("Import pre2.0.8")
changed 'ptrdiff_t' from 'int' to 'long'.
GCC expects it as 'int' really, and this leads to the following
warning when building KFENCE:
CC mm/kfence/report.o
In file included from ./include/linux/printk.h:7,
from ./include/linux/kernel.h:16,
from mm/kfence/report.c:10:
mm/kfence/report.c: In function 'kfence_report_error':
./include/linux/kern_levels.h:5:18: warning: format '%td' expects argument of type 'ptrdiff_t', but argument 6 has type 'long int' [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH'
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
| ^~~~~~~~
./include/linux/printk.h:343:9: note: in expansion of macro 'KERN_ERR'
343 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~
mm/kfence/report.c:213:3: note: in expansion of macro 'pr_err'
213 | pr_err("Out-of-bounds %s at 0x%p (%luB %s of kfence-#%td):\n",
| ^~~~~~
<asm-generic/uapi/posix-types.h> defines it as 'int', and
defines 'size_t' and 'ssize_t' exactly as powerpc do, so
remove the powerpc specific definitions and fallback on
generic ones.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e43d133bf52fa19e577f64f3a3a38cedc570377d.1617616601.git.christophe.leroy@csgroup.eu
When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.
Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
178 | static struct notifier_block fail_iommu_bus_notifier = {
Fixes: d6b9a81b2a ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/pseries/lpar.c:1633:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617672785-81372-1-git-send-email-yang.lee@linux.alibaba.com
There is no need for this to be in asm, use the new intrrupt entry wrapper.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210406025508.821718-1-npiggin@gmail.com
The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.
Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.
[35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
at 10004a18 nip 10004a18 lr 100049f8 code 1 in
cpu_event_pinned_vs_ebb_test[10000000+10000]
Test results after the patch:
$ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
test: cpu_event_pinned_vs_ebb
tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty
Binding to cpu 8
EBB Handler is at 0x100050c8
read error on event 0x7fffe6bd4040!
PM_RUN_INST_CMPL: result 9872 running/enabled 37930432
success: cpu_event_pinned_vs_ebb
This bug was hidden by other logic until commit 1908dc9117 (perf:
Tweak perf_event_attr::exclusive semantics).
Fixes: 4df4899911 ("powerpc/perf: Add power8 EBB support")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit 1908dc9117]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com
Let the memory removed from the linear mapping to be used for the trace
buffers be mmaped. This is a useful way of providing cache-inhibited
memory for the alignment_handler selftest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: make memtrace_mmap() static as noticed by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-1-jniethe5@gmail.com
As best as I can tell the ".machine" directive in trampoline_64.S is no
longer, or never was, necessary.
It was added in commit 0d97631392 ("powerpc: Add purgatory for
kexec_file_load() implementation."), which created the file based on
the kexec-tools purgatory. It may be/have-been necessary in the
kexec-tools version, but we have a completely different build system,
and we already pass the desired CPU flags, eg:
gcc ... -m64 -Wl,-a64 -mabi=elfv2 -Wa,-maltivec -Wa,-mpower4 -Wa,-many
... arch/powerpc/purgatory/trampoline_64.S
So drop the ".machine" directive and rely on the assembler flags.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20210315034159.315675-1-mpe@ellerman.id.au
When the original spectre/meltdown mitigations were merged we put them
in setup_64.c for lack of a better place.
Since then we created security.c for some of the other mitigation
related code. But it should all be in there.
This sort of code movement can cause trouble for backports, but
hopefully this code is relatively stable these days (famous last words).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326101201.1973552-1-mpe@ellerman.id.au
We have now fixed the known bugs in STRICT_KERNEL_RWX for Book3S
64-bit Hash and Radix MMUs, see preceding commits, so allow the
option to be selected again.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-6-mpe@ellerman.id.au
When we enabled STRICT_KERNEL_RWX we received some reports of boot
failures when using the Hash MMU and running under phyp. The crashes
are intermittent, and often exhibit as a completely unresponsive
system, or possibly an oops.
One example, which was caught in xmon:
[ 14.068327][ T1] devtmpfs: mounted
[ 14.069302][ T1] Freeing unused kernel memory: 5568K
[ 14.142060][ T347] BUG: Unable to handle kernel instruction fetch
[ 14.142063][ T1] Run /sbin/init as init process
[ 14.142074][ T347] Faulting instruction address: 0xc000000000004400
cpu 0x2: Vector: 400 (Instruction Access) at [c00000000c7475e0]
pc: c000000000004400: exc_virt_0x4400_instruction_access+0x0/0x80
lr: c0000000001862d4: update_rq_clock+0x44/0x110
sp: c00000000c747880
msr: 8000000040001031
current = 0xc00000000c60d380
paca = 0xc00000001ec9de80 irqmask: 0x03 irq_happened: 0x01
pid = 347, comm = kworker/2:1
...
enter ? for help
[c00000000c747880] c0000000001862d4 update_rq_clock+0x44/0x110 (unreliable)
[c00000000c7478f0] c000000000198794 update_blocked_averages+0xb4/0x6d0
[c00000000c7479f0] c000000000198e40 update_nohz_stats+0x90/0xd0
[c00000000c747a20] c0000000001a13b4 _nohz_idle_balance+0x164/0x390
[c00000000c747b10] c0000000001a1af8 newidle_balance+0x478/0x610
[c00000000c747be0] c0000000001a1d48 pick_next_task_fair+0x58/0x480
[c00000000c747c40] c000000000eaab5c __schedule+0x12c/0x950
[c00000000c747cd0] c000000000eab3e8 schedule+0x68/0x120
[c00000000c747d00] c00000000016b730 worker_thread+0x130/0x640
[c00000000c747da0] c000000000174d50 kthread+0x1a0/0x1b0
[c00000000c747e10] c00000000000e0f0 ret_from_kernel_thread+0x5c/0x6c
This shows that CPU 2, which was idle, woke up and then appears to
randomly take an instruction fault on a completely valid area of
kernel text.
The cause turns out to be the call to hash__mark_rodata_ro(), late in
boot. Due to the way we layout text and rodata, that function actually
changes the permissions for all of text and rodata to read-only plus
execute.
To do the permission change we use a hypervisor call, H_PROTECT. On
phyp that appears to be implemented by briefly removing the mapping of
the kernel text, before putting it back with the updated permissions.
If any other CPU is executing during that window, it will see spurious
faults on the kernel text and/or data, leading to crashes.
To fix it we use stop machine to collect all other CPUs, and then have
them drop into real mode (MMU off), while we change the mapping. That
way they are unaffected by the mapping temporarily disappearing.
We don't see this bug on KVM because KVM always use VPM=1, where
faults are directed to the hypervisor, and the fault will be
serialised vs the h_protect() by HPTE_V_HVLOCK.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-5-mpe@ellerman.id.au
Pull the loop calling hpte_updateboltedpp() out of
hash__change_memory_range() into a helper function. We need it to be a
separate function for the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-4-mpe@ellerman.id.au
In hash__mark_rodata_ro() we pass the raw PP_RXXX value to
hash__change_memory_range(). That has the effect of setting the key to
zero, because PP_RXXX contains no key value.
Fix it by using htab_convert_pte_flags(), which knows how to convert a
pgprot into a pp value, including the key.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210331003845.216246-3-mpe@ellerman.id.au
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit d94b827e89 ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
In the kernel we have:
#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000)
#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00)
So the LO bits of newpp are already in the right place, and the HI
bits need to be shifted down by 48.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-2-mpe@ellerman.id.au
In the past we had a fallback definition for _PAGE_KERNEL_ROX, but we
removed that in commit d82fd29c5a ("powerpc/mm: Distribute platform
specific PAGE and PMD flags and definitions") and added definitions
for each MMU family.
However we missed adding a definition for 64s, which was not really a
bug because it's currently not used.
But we'd like to use PAGE_KERNEL_ROX in a future patch so add a
definition now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-1-mpe@ellerman.id.au
When adding a PTE a ptesync is needed to order the update of the PTE
with subsequent accesses otherwise a spurious fault may be raised.
radix__set_pte_at() does not do this for performance gains. For
non-kernel memory this is not an issue as any faults of this kind are
corrected by the page fault handler. For kernel memory these faults
are not handled. The current solution is that there is a ptesync in
flush_cache_vmap() which should be called when mapping from the
vmalloc region.
However, map_kernel_page() does not call flush_cache_vmap(). This is
troublesome in particular for code patching with Strict RWX on radix.
In do_patch_instruction() the page frame that contains the instruction
to be patched is mapped and then immediately patched. With no ordering
or synchronization between setting up the PTE and writing to the page
it is possible for faults.
As the code patching is done using __put_user_asm_goto() the resulting
fault is obscured - but using a normal store instead it can be seen:
BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c
Faulting instruction address: 0xc00000000008bd74
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: nop_module(PO+) [last unloaded: nop_module]
CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43
NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810
REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000
CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1
This results in the kind of issue reported here:
https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/
Chris Riedl suggested a reliable way to reproduce the issue:
$ mount -t debugfs none /sys/kernel/debug
$ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) &
Turning ftrace on and off does a large amount of code patching which
in usually less then 5min will crash giving a trace like:
ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000)
------------[ ftrace bug ]------------
ftrace failed to modify
[<c000000000bf8e5c>] napi_busy_loop+0xc/0x390
actual: 11:3b:47:4b
Setting ftrace call site to call ftrace function
ftrace record flags: 80000001
(1)
expected tramp: c00000000006c96c
------------[ cut here ]------------
WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8
Modules linked in: nop_module(PO-) [last unloaded: nop_module]
CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1
NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0
REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a)
MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000
CFAR: c0000000001a9c98 IRQMASK: 0
GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022
GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8
GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118
GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000
GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008
GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8
GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020
GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0
NIP ftrace_bug+0x28c/0x2e8
LR ftrace_bug+0x288/0x2e8
Call Trace:
ftrace_bug+0x288/0x2e8 (unreliable)
ftrace_modify_all_code+0x168/0x210
arch_ftrace_update_code+0x18/0x30
ftrace_run_update_code+0x44/0xc0
ftrace_startup+0xf8/0x1c0
register_ftrace_function+0x4c/0xc0
function_trace_init+0x80/0xb0
tracing_set_tracer+0x2a4/0x4f0
tracing_set_trace_write+0xd4/0x130
vfs_write+0xf0/0x330
ksys_write+0x84/0x140
system_call_exception+0x14c/0x230
system_call_common+0xf0/0x27c
To fix this when updating kernel memory PTEs using ptesync.
Fixes: f1cb8f9beb ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Tidy up change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-1-jniethe5@gmail.com
Various spelling/typo fixes.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a fsl_pamu_configure_l1_stash API that qman_portal can call directly
instead of indirecting through the iommu attr API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-8-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert powerpc to relative jump labels.
Before the patch, pseries_defconfig vmlinux.o has:
9074 __jump_table 0003f2a0 0000000000000000 0000000000000000 01321fa8 2**0
With the patch, the same config gets:
9074 __jump_table 0002a0e0 0000000000000000 0000000000000000 01321fb4 2**0
Size is 258720 without the patch, 172256 with the patch.
That's a 33% size reduction.
Largely copied from commit c296146c05 ("arm64/kernel: jump_label:
Switch to relative references")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/828348da7868eda953ce023994404dfc49603b64.1616514473.git.christophe.leroy@csgroup.eu
Implement Extended Berkeley Packet Filter on Powerpc 32
Test result with test_bpf module:
test_bpf: Summary: 378 PASSED, 0 FAILED, [354/366 JIT'ed]
Registers mapping:
[BPF_REG_0] = r11-r12
/* function arguments */
[BPF_REG_1] = r3-r4
[BPF_REG_2] = r5-r6
[BPF_REG_3] = r7-r8
[BPF_REG_4] = r9-r10
[BPF_REG_5] = r21-r22 (Args 9 and 10 come in via the stack)
/* non volatile registers */
[BPF_REG_6] = r23-r24
[BPF_REG_7] = r25-r26
[BPF_REG_8] = r27-r28
[BPF_REG_9] = r29-r30
/* frame pointer aka BPF_REG_10 */
[BPF_REG_FP] = r17-r18
/* eBPF jit internal registers */
[BPF_REG_AX] = r19-r20
[TMP_REG] = r31
As PPC32 doesn't have a redzone in the stack, a stack frame must always
be set in order to host at least the tail count counter.
The stack frame remains for tail calls, it is set by the first callee
and freed by the last callee.
r0 is used as temporary register as much as possible. It is referenced
directly in the code in order to avoid misusing it, because some
instructions interpret it as value 0 instead of register r0
(ex: addi, addis, stw, lwz, ...)
The following operations are not implemented:
case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */
case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */
case BPF_STX | BPF_XADD | BPF_DW: /* *(u64 *)(dst + off) += src */
The following operations are only implemented for power of two constants:
case BPF_ALU64 | BPF_MOD | BPF_K: /* dst %= imm */
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/61d8b149176ddf99e7d5cef0b6dc1598583ca202.1616430991.git.christophe.leroy@csgroup.eu
The following opcodes will be needed for the implementation
of eBPF for PPC32. Add them in asm/ppc-opcode.h
PPC_RAW_ADDE
PPC_RAW_ADDZE
PPC_RAW_ADDME
PPC_RAW_MFLR
PPC_RAW_ADDIC
PPC_RAW_ADDIC_DOT
PPC_RAW_SUBFC
PPC_RAW_SUBFE
PPC_RAW_SUBFIC
PPC_RAW_SUBFZE
PPC_RAW_ANDIS
PPC_RAW_NOR
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7bd573a368edd78006f8a5af508c726e7ce1ed2.1616430991.git.christophe.leroy@csgroup.eu
In preparation of using user_access_begin/end in restore_user_regs(),
move the access_ok() inside the function.
It makes no difference as the behaviour on a failed access_ok() is
the same as on failed restore_user_regs().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c106eb2f37c3040f1fd38b40e50c670feb7cb835.1616151715.git.christophe.leroy@csgroup.eu
In the same spirit as commit f1cf4f93de ("powerpc/signal32: Remove
ifdefery in middle of if/else")
MSR_TM_ACTIVE() is always defined and returns always 0 when
CONFIG_PPC_TRANSACTIONAL_MEM is not selected, so the awful
ifdefery in the middle of an if/else can be removed.
Make 'msr_hi' a 'long long' to avoid build failure on PPC32
due to the 32 bits left shift.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4b48b2f0be1ef13fc8e57452b7f8350da28d521.1616151715.git.christophe.leroy@csgroup.eu
Convention is to prefix functions with __unsafe_ instead of
suffixing it with _unsafe.
Rename save_user_regs_unsafe() and save_general_regs_unsafe()
accordingly, that is respectively __unsafe_save_general_regs() and
__unsafe_save_user_regs().
Suggested-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8cef43607e5b35a7fd0829dec812d88beb570df2.1616151715.git.christophe.leroy@csgroup.eu
Similarly to commit 5cf773fc8f37 ("powerpc/uaccess: Also perform
64 bits copies in unsafe_copy_to_user() on ppc32")
ppc32 has an efficiant 64 bits unsafe_get_user(), so also use it in
order to unroll loops more.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/308e65d9237a14e8c0e3b22919fcf0b5e5592608.1616151715.git.christophe.leroy@csgroup.eu
clang 11 and future GCC are supporting asm goto with outputs.
Use it to implement get_user in order to get better generated code.
Note that clang requires to set x in the default branch of
__get_user_size_goto() otherwise is compliant about x not being
initialised :puzzled:
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/403745b5aaa1b315bb4e8e46c1ba949e77eecec0.1615398265.git.christophe.leroy@csgroup.eu
Make get_user() do the access_ok() check then call __get_user().
Make put_user() do the access_ok() check then call __put_user().
Then embed __get_user_size() and __put_user_size() in
__get_user() and __put_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eebc554f6a81f570c46ea3551000ff5b886e4faa.1615398265.git.christophe.leroy@csgroup.eu
__get_user_bad() and __put_user_bad() are functions that are
declared but not defined, in order to make the link fail in
case they are called.
Nowadays, we have BUILD_BUG() and BUILD_BUG_ON() for that, and
they have the advantage to break the build earlier as it breaks
it at compile time instead of link time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7d839e994f49fae4ff7b70fac72bd951272436b.1615398265.git.christophe.leroy@csgroup.eu
Commit d02f6b7dab ("powerpc/uaccess: Evaluate macro arguments once,
before user access is allowed") changed the __chk_user_ptr()
argument from the passed ptr pointer to the locally
declared __gu_addr. But __gu_addr is locally defined as __user
so the check is pointless.
During kernel build __chk_user_ptr() voids and is only evaluated
during sparse checks so it should have been armless to leave the
original pointer check there.
Nevertheless, this check is indeed redundant with the assignment
above which casts the ptr pointer to the local __user __gu_addr.
In case of mismatch, sparse will detect it there, so the
__check_user_ptr() is not needed anywhere else than in access_ok().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69f17d75046733b891ab2e668dbf464787cdf598.1615398265.git.christophe.leroy@csgroup.eu
__unsafe_put_user_goto() is just an intermediate layer to
__put_user_size_goto() without added value other than doing
the __user pointer type checking.
Do the __user pointer type checking in __put_user_size_goto()
and remove __unsafe_put_user_goto().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6552149209aebd887a6977272b06a41256bdb9f.1615398265.git.christophe.leroy@csgroup.eu
Commit 6bfd93c32a ("powerpc: Fix incorrect might_sleep in
__get_user/__put_user on kernel addresses") added a check to not call
might_sleep() on kernel addresses. This was to enable the use of
__get_user() in the alignment exception handler for any address.
Then commit 95156f0051 ("lockdep, mm: fix might_fault() annotation")
added a check of the address space in might_fault(), based on
set_fs() logic. But this didn't solve the powerpc alignment exception
case as it didn't call set_fs(KERNEL_DS).
Nowadays, set_fs() is gone, previous patch fixed the alignment
exception handler and __get_user/__put_user are not supposed to be
used anymore to read kernel memory.
Therefore the is_kernel_addr() check has become useless and can be
removed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e0a980a4dc7a2551183dd5cb30f46eafdbee390c.1615398265.git.christophe.leroy@csgroup.eu
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() is granting userspace access and is exclusively
for userspace access.
In alignment exception handler, use probe_kernel_read_inst()
instead of __get_user_instr() for reading instructions in kernel.
This will allow to remove the is_kernel_addr() check in
__get/put_user() in a following patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9ecbce00178484e66ca7adec2ff210058037704.1615398265.git.christophe.leroy@csgroup.eu
Powerpc is the only architecture having _inatomic variants of
__get_user() and __put_user() accessors. They were introduced
by commit e68c825bb0 ("[POWERPC] Add inatomic versions of __get_user
and __put_user").
Those variants expand to the _nosleep macros instead of expanding
to the _nocheck macros. The only difference between the _nocheck
and the _nosleep macros is the call to might_fault().
Since commit 662bbcb274 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), __get/put_user() can be used in atomic parts
of the code, therefore __get/put_user_inatomic() have become useless.
Remove __get_user_inatomic() and __put_user_inatomic().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e5c895669e8d54a7810b62dc61eb111f33c2c37.1615398265.git.christophe.leroy@csgroup.eu
This patch converts emulate_spe() to using user_access_begin
logic.
Since commit 662bbcb274 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), might_fault() doesn't fire when called from
sections where pagefaults are disabled, which must be the case
when using _inatomic variants of __get_user and __put_user. So
the might_fault() in user_access_begin() is not a problem.
There was a verification of user_mode() together with the access_ok(),
but there is a second verification of user_mode() just after, that
leads to immediate return. The access_ok() is now part of the
user_access_begin which is called after that other user_mode()
verification, so no need to check user_mode() again.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c95a648fdf75992c9d88f3c73cc23e7537fcf2ad.1615555354.git.christophe.leroy@csgroup.eu
Commit bce74491c3 ("powerpc/vdso: fix unnecessary rebuilds of
vgettimeofday.o") moved vdso32_wrapper.o and vdso64_wrapper.o out
of arch/powerpc/kernel/vdso[32/64]/ and removed the dependencies in
the Makefile. This leads to the wrappers not being re-build hence the
kernel embedding the old vdso library.
Add back missing dependencies to ensure vdso32_wrapper.o and vdso64_wrapper.o
are rebuilt when vdso32.so.dbg and vdso64.so.dbg are changed.
Fixes: bce74491c3 ("powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8bb015bc98c51d8ced581415b7e3d157e18da7c9.1617181918.git.christophe.leroy@csgroup.eu
PPC32 encounters a KUAP fault when trying to handle a signal with
VDSO unmapped.
Kernel attempted to read user page (7fc07ec0) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel data access on read at 0x7fc07ec0
Faulting instruction address: 0xc00111d4
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=16K PREEMPT CMPC885
CPU: 0 PID: 353 Comm: sigreturn_vdso Not tainted 5.12.0-rc4-s3k-dev-01553-gb30c310ea220 #4814
NIP: c00111d4 LR: c0005a28 CTR: 00000000
REGS: cadb3dd0 TRAP: 0300 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48000884 XER: 20000000
DAR: 7fc07ec0 DSISR: 88000000
GPR00: c0007788 cadb3e90 c28d4a40 7fc07ec0 7fc07ed0 000004e0 7fc07ce0 00000000
GPR08: 00000001 00000001 7fc07ec0 00000000 28000282 1001b828 100a0920 00000000
GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e
GPR24: ffffffff 105c43c8 00000000 7fc07ec8 cadb3f40 cadb3ec8 c28d4a40 00000000
NIP [c00111d4] flush_icache_range+0x90/0xb4
LR [c0005a28] handle_signal32+0x1bc/0x1c4
Call Trace:
[cadb3e90] [100d0000] 0x100d0000 (unreliable)
[cadb3ec0] [c0007788] do_notify_resume+0x260/0x314
[cadb3f20] [c000c764] syscall_exit_prepare+0x120/0x184
[cadb3f30] [c00100b4] ret_from_syscall+0xc/0x28
--- interrupt: c00 at 0xfe807f8
NIP: 0fe807f8 LR: 10001060 CTR: c0139378
REGS: cadb3f40 TRAP: 0c00 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 28000482 XER: 20000000
GPR00: 00000025 7fc081c0 77bb1690 00000000 0000000a 28000482 00000001 0ff03a38
GPR08: 0000d032 00006de5 c28d4a40 00000009 88000482 1001b828 100a0920 00000000
GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e
GPR24: ffffffff 105c43c8 00000000 77ba7628 10002398 10010000 10002124 00024000
NIP [0fe807f8] 0xfe807f8
LR [10001060] 0x10001060
--- interrupt: c00
Instruction dump:
38630010 7c001fac 38630010 4200fff0 7c0004ac 4c00012c 4e800020 7c001fac
2c0a0000 38630010 4082ffcc 4bffffe4 <7c00186c> 2c070000 39430010 4082ff8c
---[ end trace 3973fb72b049cb06 ]---
This is because flush_icache_range() is called on user addresses.
The same problem was detected some time ago on PPC64. It was fixed by
enabling KUAP in commit 59bee45b97 ("powerpc/mm: Fix missing KUAP
disable in flush_coherent_icache()").
PPC32 doesn't use flush_coherent_icache() and fallbacks on
clean_dcache_range() and invalidate_icache_range().
We could fix it similarly by enabling user access in those functions,
but this is overkill for just flushing two instructions.
The two instructions are 8 bytes aligned, so a single dcbst/icbi is
enough to flush them. Do like __patch_instruction() and inline
a dcbst followed by an icbi just after the write of the instructions,
while user access is still allowed. The isync is not required because
rfi will be used to return to user.
icbi() is handled as a read so read-write user access is needed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bde9154e5351a5ac7bca3d59cdb5a5e8edacbb79.1617199569.git.christophe.leroy@csgroup.eu
This reverts commit 675bceb097 ("powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc")
All the related issues are fixed as of commit:
f14312e1ed ("mm/debug_vm_pgtable: avoid doing memory allocation with pgtable_t mapped.")
Hence re-enable it.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034855.74513-1-aneesh.kumar@linux.ibm.com
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit 4336b93378 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes: 4336b93378 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
When compiling the powerpc with the SMP disabled, it shows the issue:
arch/powerpc/kernel/watchdog.c: In function ‘watchdog_smp_panic’:
arch/powerpc/kernel/watchdog.c:177:4: error: implicit declaration of function ‘smp_send_nmi_ipi’; did you mean ‘smp_send_stop’? [-Werror=implicit-function-declaration]
177 | smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
| ^~~~~~~~~~~~~~~~
| smp_send_stop
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:273: arch/powerpc/kernel/watchdog.o] Error 1
make[1]: *** [scripts/Makefile.build:534: arch/powerpc/kernel] Error 2
make: *** [Makefile:1980: arch/powerpc] Error 2
make: *** Waiting for unfinished jobs....
We found that powerpc used ipi to implement hardlockup watchdog, so the
HAVE_HARDLOCKUP_DETECTOR_ARCH should depend on the SMP.
Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210327094900.938555-1-chenhuang5@huawei.com
One of the reasons that dlpar_cpu_offline can fail is when attempting to
offline the last online CPU of the kernel. This can be observed in a
pseries QEMU guest that has hotplugged CPUs. If the user offlines all
other CPUs of the guest, and a hotplugged CPU is now the last online
CPU, trying to reclaim it will fail.
The current error message in this situation returns rc with -EBUSY and a
generic explanation, e.g.:
pseries-hotplug-cpu: Failed to offline CPU PowerPC,POWER9, rc: -16
EBUSY can be caused by other conditions, such as cpu_hotplug_disable
being true. Throwing a more specific error message for this case,
instead of just "Failed to offline CPU", makes it clearer that the error
is in fact a known error situation instead of other generic/unknown
cause.
This patch adds a 'last online' check in dlpar_cpu_offline() to catch
the 'last online CPU' offline error, eturning a more informative error
message:
pseries-hotplug-cpu: Unable to remove last online CPU PowerPC,POWER9
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210323205056.52768-2-danielhb413@gmail.com
call_do_irq() and call_do_softirq() are simple enough to be
worth inlining.
Inlining them avoids an mflr/mtlr pair plus a save/reload on stack.
This is inspired from S390 arch. Several other arches do more or
less the same. The way sparc arch does seems odd thought.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210320122227.345427-1-mpe@ellerman.id.au
Sparse warns:
warning: symbol 'rfi_flush' was not declared.
warning: symbol 'entry_flush' was not declared.
warning: symbol 'uaccess_flush' was not declared.
Define 'entry_flush' and 'uaccess_flush' as static because they are
not referenced outside the file. Include asm/security_features.h in
which 'rfi_flush' is declared.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316041148.29694-1-heying24@huawei.com
arch/powerpc/kernel/iommu.c:76:2-16: WARNING: NULL check before some freeing functions is not needed.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Fixes: 691602aab9 ("powerpc/iommu/debug: Add debugfs entries for IOMMU tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318234441.GA63469@f8e20a472e81
With below two commits:
commit c91435d95c ("powerpc/book3s64/hash/kuep: Enable KUEP on hash")
commit b2ff33a10c ("powerpc/book3s64/hash/kuap: Enable kuap on hash")
the kernel now supports kuap/kuep with hash translation. Hence select the
Kconfig even when radix is disabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034829.72255-1-aneesh.kumar@linux.ibm.com
Hash faults use the trap vector to decide whether this is an
instruction or data fault. This should use the TRAP accessor
rather than open access regs->trap.
This won't cause a problem at the moment because 64s only uses
trap flags for system call interrupts (the norestart flag), but
that could change if any other trap flags get used in future.
Fixes: a4922f5442 ("powerpc/64s: move the hash fault handling logic to C")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316105205.407767-1-npiggin@gmail.com
In fault.c, #ifdef CONFIG_PPC_MEM_KEYS is not needed because all
functions are always defined, and arch_vma_access_permitted()
always returns true when CONFIG_PPC_MEM_KEYS is not defined so
access_pkey_error() will return false so bad_access_pkey()
will never be called.
Include linux/pkeys.h to get a definition of vma_pkeys() for
bad_access_pkey().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8038392f38d81f2ad169347efac29146f553b238.1615819955.git.christophe.leroy@csgroup.eu
Section mismatch in reference from the function .fsl_add_bridge() to
the function .init.text:.setup_pci_cmd()
fsl_add_bridge() is not __init, and can't be, and is the only caller
of setup_pci_cmd(). Fix it by making setup_pci_cmd() non-init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093341.132986-1-mpe@ellerman.id.au
Section mismatch in reference from the function .smp_setup_pacas() to
the function .init.text:.allocate_paca()
The only caller of smp_setup_pacas() is setup_arch() which is __init,
so mark smp_setup_pacas() __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093333.132657-1-mpe@ellerman.id.au
lkp reported warnings in some configuration due to
update_current_thread_amr() being unused:
arch/powerpc/mm/book3s64/pkeys.c:284:20: error: unused function 'update_current_thread_amr'
static inline void update_current_thread_amr(u64 value)
Which is because it's only use is inside an ifdef. We could move it
inside the ifdef, but it's a single line function and only has one
caller, so just fold it in.
Similarly update_current_thread_iamr() is small and only called once,
so fold it in also.
Fixes: 48a8ab4eeb ("powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093320.132331-1-mpe@ellerman.id.au
The build fails with CONFIG_PROC_FS=n:
arch/powerpc/kernel/eeh.c:1571:12: error: ‘proc_eeh_show’ defined but not used
1571 | static int proc_eeh_show(struct seq_file *m, void *v)
Wrap proc_eeh_show() in an ifdef to avoid it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093300.131998-1-mpe@ellerman.id.au
fixed the following coccicheck:
./arch/powerpc/sysdev/xive/spapr.c:552:8-9: WARNING: return of 0/1 in
function 'xive_spapr_match' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1615793096-83758-1-git-send-email-yang.lee@linux.alibaba.com
Commit aac6a91fea ("powerpc/asm: Remove unused symbols in
asm-offsets.c") removed GPR15 to GPR31 but kept GPR14,
probably because it pops up in a couple of comments when doing
a grep.
However, it was never used either, so remove it as well.
Fixes: aac6a91fea ("powerpc/asm: Remove unused symbols in asm-offsets.c")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9881c68fbca004f9ea18fc9473f630e11ccd6417.1615806071.git.christophe.leroy@csgroup.eu
Sparse reports the following problems:
arch/powerpc/math-emu/math.c:228:21: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:31: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:41: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:51: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:237:13: warning: incorrect type in initializer (different address spaces)
arch/powerpc/math-emu/math.c:237:13: expected unsigned int [noderef] __user *_gu_addr
arch/powerpc/math-emu/math.c:237:13: got unsigned int [usertype] *
arch/powerpc/math-emu/math.c:226:1: warning: symbol 'do_mathemu' was not declared. Should it be static?
Add missing __user qualifier when casting pointer used in get_user()
Use NULL instead of 0 to initialise opX local variables.
Add a prototype for do_mathemu() (Added in processor.h like sparc)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e4d1aae7604d89c98a52dfd8ce8443462e595670.1615809591.git.christophe.leroy@csgroup.eu
In preparation of porting PPC32 to C syscall entry/exit,
create C version of kuap_save_and_lock() and kuap_user_restore() and
kuap_kernel_restore() and kuap_assert_locked() and
kuap_get_and_assert_locked() on 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156a7c4b669d26785391422a5581a1d919544c9a.1615552867.git.christophe.leroy@csgroup.eu
In preparation of porting PPC32 to C syscall entry/exit,
create C version of kuap_save_and_lock() and kuap_user_restore() and
kuap_kernel_restore() and kuap_assert_locked() and
kuap_get_and_assert_locked() on book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2be8fb729da4a0f9863b25e1b9d547174fcd5056.1615552867.git.christophe.leroy@csgroup.eu
In preparation of porting powerpc32 to C syscall entry/exit,
rename kuap_check_amr() and kuap_get_and_check_amr() as
kuap_assert_locked() and kuap_get_and_assert_locked(), and move in the
generic asm/kup.h the stub for when CONFIG_PPC_KUAP is not selected.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f82614d9b17b83abd739aa18fc08811815d0c2e3.1615552867.git.christophe.leroy@csgroup.eu
Save non volatile registers, XER, CTR, MSR and NIP in exception prolog.
Also assign proper value to r2 and r3 there.
For now, recalculate thread pointer in prepare_transfer_to_handler.
It will disappear once KUAP is ported to C.
And remove the comment which is now completely wrong.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/56f0cde9dd0362edf2ddba4d887552013eee7329.1615552867.git.christophe.leroy@csgroup.eu
Exception prologs all do the same at the end:
- Save trapno in stack
- Mark stack with exception marker
- Save r0
- Save r3 to r8
Refactor that into a COMMON_EXCEPTION_PROLOG_END macro.
At the same time use r1 instead of r11.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e1c45d2e895e0693c42d2a6840df1105a148efea.1615552867.git.christophe.leroy@csgroup.eu
In order to get more control in exception prolog, dismantle
all non standard exception macros, finishing with EXC_XFER_STD
and EXC_XFER_LITE and EXC_XFER_TEMPLATE.
Also remove transfer_to_handler_full and ret_from_except and
ret_from_except_full as they are not used anymore.
Last parameter of EXCEPTION() is now ignored, will be removed
in a later patch to avoid too much churn.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca5795d04a220586b7037dbbbe6951dfa9e768eb.1615552867.git.christophe.leroy@csgroup.eu
Until now, non volatile registers were restored everytime they
were saved, ie using EXC_XFER_STD meant saving and restoring
them while EXC_XFER_LITE meant neither saving not restoring them.
Now that they are always saved, EXC_XFER_STD means to restore
them and EXC_XFER_LITE means to not restore them.
Most of the users of EXC_XFER_STD only need to retrieve the
non volatile registers. For them there is no need to restore
the non volatile registers as they have not been modified.
Only very few exceptions require non volatile registers restore.
Opencode the few places which require saving of non volatile
registers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d1cb12d8023cc6afc1f07150565571373c04945c.1615552867.git.christophe.leroy@csgroup.eu
In order to increase flexibility, add a macro that will for now
call transfer_to_handler.
As transfer_to_handler doesn't do the actual transfer anymore,
also name it prepare_transfer_to_handler. The following patches
will progressively remove the use of transfer_to_handler label.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7f757c52518ab1d7b27ad5113b10f860e803f467.1615552867.git.christophe.leroy@csgroup.eu
