wrtspr() is a function to write an arbitrary value in a special
register. It is used on 8xx to write to SPRN_NRI, SPRN_EID and
SPRN_EIE. Writing any value to one of those will play with MSR EE
and MSR RI regardless of that value.
r0 is used many places in the generated code and using r0 for
that creates an unnecessary dependency of this instruction with
preceding ones using r0 in a few places in vmlinux.
r2 is most likely the most stable register as it contains the
pointer to 'current'.
Using r2 instead of r0 avoids that unnecessary dependency.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69f9968f4b592fefda55227f0f7430ea612cc950.1611299687.git.christophe.leroy@csgroup.eu
When we hit an UE while using machine check safe copy routines,
ignore_event flag is set and the event is ignored by mce handler,
And the flag is also saved for defered handling and printing of
mce event information, But as of now saving of this flag is done
on checking if the effective address is provided or physical address
is calculated, which is not right.
Save ignore_event flag regardless of whether the effective address is
provided or physical address is calculated.
Without this change following log is seen, when the event is to be
ignored.
[ 512.971365] MCE: CPU1: machine check (Severe) UE Load/Store [Recovered]
[ 512.971509] MCE: CPU1: NIP: [c0000000000b67c0] memcpy+0x40/0x90
[ 512.971655] MCE: CPU1: Initiator CPU
[ 512.971739] MCE: CPU1: Unknown
[ 512.972209] MCE: CPU1: machine check (Severe) UE Load/Store [Recovered]
[ 512.972334] MCE: CPU1: NIP: [c0000000000b6808] memcpy+0x88/0x90
[ 512.972456] MCE: CPU1: Initiator CPU
[ 512.972534] MCE: CPU1: Unknown
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407045816.352276-1-ganeshgr@linux.ibm.com
For that, create a 32 bits version of patch_imm64_load_insns()
and create a patch_imm_load_insns() which calls
patch_imm32_load_insns() on PPC32 and patch_imm64_load_insns()
on PPC64.
Adapt optprobes_head.S for PPC32. Use PPC_LL/PPC_STL macros instead
of raw ld/std, opt out things linked to paca and use stmw/lmw to
save/restore registers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bad58c66859b2a475c0ad516b53164ae3b4853cd.1618927318.git.christophe.leroy@csgroup.eu
As of today, if the DDW is big enough to fit (1 << MAX_PHYSMEM_BITS)
it's possible to use direct DMA mapping even with pmem region.
But, if that happens, the window size (len) is set to (MAX_PHYSMEM_BITS
- page_shift) instead of MAX_PHYSMEM_BITS, causing a pagesize times
smaller DDW to be created, being insufficient for correct usage.
Fix this so the correct window size is used in this case.
Fixes: bf6e2d562b ("powerpc/dma: Fallback to dma_ops when persistent memory present")
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210420045404.438735-1-leobras.c@gmail.com
The changes to add KUAP support with the hash MMU broke booting of KVM
PR guests. The symptom is no visible progress of the guest, or possibly
just "SLOF" being printed to the qemu console.
Host code is still executing, but breaking into xmon might show a stack
trace such as:
__might_fault+0x84/0xe0 (unreliable)
kvm_read_guest+0x1c8/0x2f0 [kvm]
kvmppc_ld+0x1b8/0x2d0 [kvm]
kvmppc_load_last_inst+0x50/0xa0 [kvm]
kvmppc_exit_pr_progint+0x178/0x220 [kvm_pr]
kvmppc_handle_exit_pr+0x31c/0xe30 [kvm_pr]
after_sprg3_load+0x80/0x90 [kvm_pr]
kvmppc_vcpu_run_pr+0x104/0x260 [kvm_pr]
kvmppc_vcpu_run+0x34/0x48 [kvm]
kvm_arch_vcpu_ioctl_run+0x340/0x450 [kvm]
kvm_vcpu_ioctl+0x2ac/0x8c0 [kvm]
sys_ioctl+0x320/0x1060
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
Bisect points to commit b2ff33a10c ("powerpc/book3s64/hash/kuap:
Enable kuap on hash"), but that's just the commit that enabled KUAP with
hash and made the bug visible.
The root cause seems to be that KVM PR is creating kernel mappings that
don't use the correct key, since we switched to using key 3.
We have a helper for adding the right key value, however it's designed
to take a pteflags variable, which the KVM code doesn't have. But we can
make it work by passing 0 for the pteflags, and tell it explicitly that
it should use the kernel key.
With that changed guests boot successfully.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210419120139.1455937-1-mpe@ellerman.id.au
RCU complains about us calling printk() from an offline CPU:
=============================
WARNING: suspicious RCU usage
5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
-----------------------------
kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x124/0x144
__lock_acquire+0x1098/0x28b0
lock_acquire+0x128/0x600
_raw_spin_lock_irqsave+0x6c/0xc0
down_trylock+0x2c/0x70
__down_trylock_console_sem+0x60/0x140
vprintk_emit+0x1a8/0x4b0
vprintk_func+0xcc/0x200
printk+0x40/0x54
pseries_cpu_offline_self+0xc0/0x120
arch_cpu_idle_dead+0x54/0x70
do_idle+0x174/0x4a0
cpu_startup_entry+0x38/0x40
rest_init+0x268/0x388
start_kernel+0x748/0x790
start_here_common+0x1c/0x614
Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au
We have some interesting code in our Makefile to define _TASK_CPU, based
on awk'ing the value out of asm-offsets.h. It exists to circumvent some
circular header dependencies that prevent us from referring to
task_struct in the relevant code. See the comment around _TASK_CPU in
smp.h for more detail.
Maybe one day we can come up with a better solution, but for now we can
at least limit that logic to 32-bit, because it's not needed for 64-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418131641.1186227-1-mpe@ellerman.id.au
Currently, neither the vio_bus or vio_driver structures provide support
for a shutdown() routine.
Add support for shutdown() by allowing drivers to provide a
implementation via function pointer in their vio_driver struct and
provide a proper implementation in the driver template for the vio_bus
that calls a vio drivers shutdown() if defined.
In the case that no shutdown() is defined by a vio driver and a kexec is
in progress we implement a big hammer that calls remove() to ensure no
further DMA for the devices is possible.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210402001325.939668-1-tyreld@linux.ibm.com
Performance Monitoring Unit (PMU) registers in powerpc provides
information on cycles elapsed between different stages in the
pipeline. This can be used for application tuning. On ISA v3.1
platform, this information is exposed by sampling registers.
Patch adds kernel support to capture two of the cycle counters
as part of perf sample using the sample type:
PERF_SAMPLE_WEIGHT_STRUCT.
The power PMU function 'get_mem_weight' currently uses 64 bit weight
field of perf_sample_data to capture memory latency. But following the
introduction of PERF_SAMPLE_WEIGHT_TYPE, weight field could contain
64-bit or 32-bit value depending on the architexture support for
PERF_SAMPLE_WEIGHT_STRUCT. Patches uses WEIGHT_STRUCT to expose the
pipeline stage cycles info. Hence update the ppmu functions to work for
64-bit and 32-bit weight values.
If the sample type is PERF_SAMPLE_WEIGHT, use the 64-bit weight field.
if the sample type is PERF_SAMPLE_WEIGHT_STRUCT, memory subsystem
latency is stored in the low 32bits of perf_sample_weight structure.
Also for CPU_FTR_ARCH_31, capture the two cycle counter information in
two 16 bit fields of perf_sample_weight structure.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1616425047-1666-2-git-send-email-atrajeev@linux.vnet.ibm.com
The RTAS set-indicator call, when attempting to UNISOLATE a DRC that is
already UNISOLATED or CONFIGURED, returns RTAS_OK and does nothing else
for both QEMU and phyp. This gives us an opportunity to use this
behavior to signal the hypervisor layer when an error during device
removal happens, allowing it to do a proper error handling, while not
breaking QEMU/phyp implementations that don't have this support.
This patch introduces this idea by unisolating all CPU DRCs that failed
to be removed by dlpar_cpu_remove_by_index(), when handling the
PSERIES_HP_ELOG_ID_DRC_INDEX event. This is being done for this event
only because its the only CPU removal event QEMU uses, and there's no
need at this moment to add this mechanism for phyp only code.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416210216.380291-3-danielhb413@gmail.com
Next patch will execute a set-indicator call in hotplug-cpu.c.
Create a dlpar_unisolate_drc() helper to avoid spreading more
rtas_set_indicator() calls outside of dlpar.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416210216.380291-2-danielhb413@gmail.com
sfr reports that the allyesconfig build fails with:
arch/powerpc/kernel/fadump.c: In function 'crash_fadump':
arch/powerpc/kernel/fadump.c:731:28: error: 'INTERRUPT_SYSTEM_RESET' undeclared
731 | if (TRAP(&(fdh->regs)) == INTERRUPT_SYSTEM_RESET) {
Add an include of interrupt.h to fix it.
Fixes: 7153d4bf0b ("powerpc/traps: Enhance readability for trap types")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Reformat change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210419191425.281dc58a@canb.auug.org.au
Add platform specific attr.config value checks. Patch
includes checks for both power9 and power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408074504.248211-2-maddy@linux.ibm.com
Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt
mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined
which behaves like AIL=3 for HV interrupts when set.
Set HAIL on bare metal to give us mmu-on interrupts and improve
performance.
This also fixes an scv bug: we don't implement scv real mode (AIL=0)
vectors because they are at an inconvenient location, so we just
disable scv support when AIL can not be set. However powernv assumes
that LPCR[AIL] will enable AIL mode so it enables scv support despite
HV interrupts being AIL=0, which causes scv interrupts to go off into
the weeds.
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210402024124.545826-1-npiggin@gmail.com
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define macros to list ppc interrupt types in interttupt.h, replace the
reference of the trap hex values with these macros.
Referred the hex numbers in arch/powerpc/kernel/exceptions-64e.S,
arch/powerpc/kernel/exceptions-64s.S, arch/powerpc/kernel/head_*.S,
arch/powerpc/kernel/head_booke.h and arch/powerpc/include/asm/kvm_asm.h.
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
[mpe: Resolve conflicts in nmi_disables_ftrace(), fix 40x build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1618398033-13025-1-git-send-email-sxwjean@me.com
A few archs like powerpc have different errno.h values for macros
EDEADLOCK and EDEADLK. In code including both libc and linux versions of
errno.h, this can result in multiple definitions of EDEADLOCK in the
include chain. Definitions to the same value (e.g. seen with mips) do
not raise warnings, but on powerpc there are redefinitions changing the
value, which raise warnings and errors (if using "-Werror").
Guard against these redefinitions to avoid build errors like the following,
first seen cross-compiling libbpf v5.8.9 for powerpc using GCC 8.4.0 with
musl 1.1.24:
In file included from ../../arch/powerpc/include/uapi/asm/errno.h:5,
from ../../include/linux/err.h:8,
from libbpf.c:29:
../../include/uapi/asm-generic/errno.h:40: error: "EDEADLOCK" redefined [-Werror]
#define EDEADLOCK EDEADLK
In file included from toolchain-powerpc_8540_gcc-8.4.0_musl/include/errno.h:10,
from libbpf.c:26:
toolchain-powerpc_8540_gcc-8.4.0_musl/include/bits/errno.h:58: note: this is the location of the previous definition
#define EDEADLOCK 58
cc1: all warnings being treated as errors
Cc: Stable <stable@vger.kernel.org>
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200917135437.1238787-1-Tony.Ambardar@gmail.com
On systems with large CPUs per node, even with the filtered matching of
related CPUs, there can be large number of calls to cpu_to_chip_id for
the same CPU. For example with 4096 vCPU, 1 node QEMU configuration,
with 4 threads per core, system could be see upto 1024 calls to
cpu_to_chip_id() for the same CPU. On a given system, cpu_to_chip_id()
for a given CPU would always return the same. Hence cache the result in
a lookup table for use in subsequent calls.
Since all CPUs sharing the same core will belong to the same chip, the
lookup_table has an entry for one CPU per core. chip_id_lookup_table is
not being freed and would be used on subsequent CPU online post CPU
offline.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-4-srikar@linux.vnet.ibm.com
Now that cpu_core_mask has been reintroduced, lets revert
commit 4bce545903 ("powerpc/topology: Update topology_core_cpumask")
Post this commit, lscpu should reflect topologies as requested by a user
when a QEMU instance is launched with NUMA spanning multiple sockets.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-3-srikar@linux.vnet.ibm.com
Daniel reported that with Commit 4ca234a9cb ("powerpc/smp: Stop
updating cpu_core_mask") QEMU was unable to set single NUMA node SMP
topologies such as:
-smp 8,maxcpus=8,cores=2,threads=2,sockets=2
i.e he expected 2 sockets in one NUMA node.
The above commit helped to reduce boot time on Large Systems for
example 4096 vCPU single socket QEMU instance. PAPR is silent on
having more than one socket within a NUMA node.
cpu_core_mask and cpu_cpu_mask for any CPU would be same unless the
number of sockets is different from the number of NUMA nodes.
One option is to reintroduce cpu_core_mask but use a slightly
different method to arrive at the cpu_core_mask. Previously each CPU's
chip-id would be compared with all other CPU's chip-id to verify if
both the CPUs were related at the chip level. Now if a CPU 'A' is
found related / (unrelated) to another CPU 'B', all the thread
siblings of 'A' and thread siblings of 'B' are automatically marked as
related / (unrelated).
Also if a platform doesn't support ibm,chip-id property, i.e its
cpu_to_chip_id returns -1, cpu_core_map holds a copy of
cpu_cpu_mask().
Fixes: 4ca234a9cb ("powerpc/smp: Stop updating cpu_core_mask")
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-2-srikar@linux.vnet.ibm.com
The 'chip_id' field of the XIVE CPU structure is used to choose a
target for a source located on the same chip. For that, the XIVE
driver queries the chip identifier from the "ibm,chip-id" property
and compares it to a 'src_chip' field identifying the chip of a
source. This information is only available on the PowerNV platform,
'src_chip' being assigned to XIVE_INVALID_CHIP_ID under pSeries.
The "ibm,chip-id" property is also not available on all platforms. It
was first introduced on PowerNV and later, under QEMU for pSeries/KVM.
However, the property is not part of PAPR and does not exist under
pSeries/PowerVM.
Assign 'chip_id' to XIVE_INVALID_CHIP_ID by default and let the
PowerNV platform override the value with the "ibm,chip-id" property.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210413130352.1183267-1-clg@kaod.org
These are very old properties that were used by the "gianfar" ethernet
driver. They don't have documented bindings and are obsolete.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.
Store the host_bridge reference in a separate variable prior to
pci_bus_remove().
Fixes: 7340056567 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211182435.47968-1-tyreld@linux.ibm.com
When I changed the rc variable to be long rather than int64_t I
neglected to update the printk(), leading to a build break:
arch/powerpc/platforms/pseries/papr_scm.c: In function 'papr_scm_pmem_flush':
arch/powerpc/platforms/pseries/papr_scm.c:144:26: warning: format
'%lld' expects argument of type 'long long int', but argument 3 has
type 'long int' [-Wformat=]
Fixes: 75b7c05ebf ("powerpc/papr_scm: Implement support for H_SCM_FLUSH hcall")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416111209.765444-2-mpe@ellerman.id.au
The lkp bot pointed out that with W=1 we get:
arch/powerpc/mm/book3s64/radix_pgtable.c:183:6: error: no previous
prototype for 'radix__change_memory_range'
Which is really saying that it could be static, make it so.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds the necessary glue to provide time namespaces.
Things are mainly copied from ARM64.
__arch_get_timens_vdso_data() calculates timens vdso data position
based on the vdso data position, knowing it is the next page in vvar.
This avoids having to redo the mflr/bcl/mflr/mtlr dance to locate
the page relative to running code position.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # vDSO parts
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1a15495f80ec19a87b16cf874dbf7c3fa5ec40fe.1617209142.git.christophe.leroy@csgroup.eu
Since commit 511157ab64 ("powerpc/vdso: Move vdso datapage up front")
VVAR page is in front of the VDSO area. In result it breaks CRIU
(Checkpoint Restore In Userspace) [1], where CRIU expects that "[vdso]"
from /proc/../maps points at ELF/vdso image, rather than at VVAR data page.
Laurent made a patch to keep CRIU working (by reading aux vector).
But I think it still makes sence to separate two mappings into different
VMAs. It will also make ppc64 less "special" for userspace and as
a side-bonus will make VVAR page un-writable by debugger (which previously
would COW page and can be unexpected).
I opportunistically Cc stable on it: I understand that usually such
stuff isn't a stable material, but that will allow us in CRIU have
one workaround less that is needed just for one release (v5.11) on
one platform (ppc64), which we otherwise have to maintain.
I wouldn't go as far as to say that the commit 511157ab64 is ABI
regression as no other userspace got broken, but I'd really appreciate
if it gets backported to v5.11 after v5.12 is released, so as not
to complicate already non-simple CRIU-vdso code. Thanks!
[1]: https://github.com/checkpoint-restore/criu/issues/1417
Cc: stable@vger.kernel.org # v5.11
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # vDSO parts.
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f401eb1ebc0bfc4d8f0e10dc8e525fd409eb68e2.1617209142.git.christophe.leroy@csgroup.eu
Compact the trap flags down to use the low 4 bits of regs.trap.
A few 64e interrupt trap numbers set bit 4. Although they tended to be
trivial so it wasn't a real problem[1], it is not the right thing to do,
and confusing.
[*] E.g., 0x310 hypercall goes to unknown_exception, which prints
regs->trap directly so 0x310 will appear fine, and only the syscall
interrupt will test norestart, so it won't be confused by 0x310.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-12-npiggin@gmail.com
All subarchitectures always save all GPRs to pt_regs interrupt frames
now. Remove FULL_REGS and associated bits.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-11-npiggin@gmail.com
search_exception_tables + __bad_page_fault can be substituted with
bad_page_fault, do_page_fault no longer needs to return a value
to asm for any sub-architecture, and __bad_page_fault can be static.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-10-npiggin@gmail.com
With non-volatile registers saved on interrupt, bad_page_fault
can now be called by do_page_fault.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-9-npiggin@gmail.com
With the new interrupt exit code, context tracking can be managed
more precisely, so remove the last of the 64e workarounds and switch
to the new context tracking code already used by 64s.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-8-npiggin@gmail.com
64e non-maskable interrupts save the state of the irq soft-mask in
asm. This can be done in C in interrupt wrappers as 64s does.
I haven't been able to test this with qemu because it doesn't seem
to cause FSL bookE WDT interrupts.
This makes WatchdogException an NMI interrupt, which affects 32-bit
as well (okay, or create a new handler?)
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-6-npiggin@gmail.com
Update the new C and asm interrupt return code to account for 64e
specifics, switch over to use it.
The now-unused old ret_from_except code, that was moved to 64e after the
64s conversion, is removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-5-npiggin@gmail.com
This makes adjustments to 64-bit asm and common C interrupt return
code to be usable by the 64e subarchitecture.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-4-npiggin@gmail.com
user_exit_irqoff() -> __context_tracking_exit -> vtime_user_exit
warns in __seqprop_assert due to lockdep thinking preemption is enabled
because trace_hardirqs_off() has not yet been called.
Switch the order of these two calls, which matches their ordering in
interrupt_enter_prepare.
Fixes: 5f0b6ac390 ("powerpc/64/syscall: Reconcile interrupts")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-2-npiggin@gmail.com
Introduce code to support the checking of attr.config* for
values which are reserved for a given platform.
Performance Monitoring Unit (PMU) configuration registers
have fields that are reserved and some specific values for
bit fields are reserved. For ex., MMCRA[61:62] is
Random Sampling Mode (SM) and value of 0b11 for this field
is reserved.
Writing non-zero or invalid values in these fields will
have unknown behaviours.
Patch adds a generic call-back function "check_attr_config"
in "struct power_pmu", to be called in event_init to
check for attr.config* values for a given platform.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408074504.248211-1-maddy@linux.ibm.com
Fix sparse warnings:
arch/powerpc/platforms/pseries/rtas-fadump.c:250:6: warning:
symbol 'rtas_fadump_set_regval' was not declared. Should it be static?
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408062012.85973-1-pulehui@huawei.com
flush_dcache_page() is only a few lines, it is worth
inlining.
ia64, csky, mips, openrisc and riscv have a similar
flush_dcache_page() and inline it.
On pmac32_defconfig, we get a small size reduction.
On ppc64_defconfig, we get a very small size increase.
In both case that's in the noise (less than 0.1%).
text data bss dec hex filename
18991155 5934744 1497624 26423523 19330e3 vmlinux64.before
18994829 59367321497624 26429185 1934701 vmlinux64.after
9150963 2467502 184548 11803013 b41985 vmlinux32.before
91496892467302 184548 11801539 b413c3 vmlinux32.after
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/21c417488b70b7629dae316539fb7bb8bdef4fdd.1617895813.git.christophe.leroy@csgroup.eu
__flush_dcache_icache() is usable for non HIGHMEM pages on
every platform.
It is only for HIGHMEM pages that BOOKE needs kmap() and
BOOK3S needs flush_dcache_icache_phys().
So make flush_dcache_icache_phys() dependent on CONFIG_HIGHMEM and
call it only when it is a HIGHMEM page.
We could make flush_dcache_icache_phys() available at all time,
but as it is declared NOKPROBE_SYMBOL(), GCC doesn't optimise
it out when it is not used.
So define a stub for !CONFIG_HIGHMEM in order to remove the #ifdef in
flush_dcache_icache_page() and use IS_ENABLED() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/79ed5d7914f497cd5fcd681ca2f4d50a91719455.1617895813.git.christophe.leroy@csgroup.eu
flush_dcache_icache_hugepage() is a static function, with
only one caller. That caller calls it when PageCompound() is true,
so bugging on !PageCompound() is useless if we can trust the
compiler a little. Remove the BUG_ON(!PageCompound()).
The number of elements of a page won't change over time, but
GCC doesn't know about it, so it gets the value at every iteration.
To avoid that, call compound_nr() outside the loop and save it in
a local variable.
Whether the page is a HIGHMEM page or not doesn't change over time.
But GCC doesn't know it so it does the test on every iteration.
Do the test outside the loop.
When the page is not a HIGHMEM page, page_address() will fallback on
lowmem_page_address(), so call lowmem_page_address() directly and
don't suffer the call to page_address() on every iteration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ab03712b70105fccfceef095aa03007de9295a40.1617895813.git.christophe.leroy@csgroup.eu
flush_coherent_icache() doesn't need the address anymore,
so it can be called immediately when entering the public
functions and doesn't need to be disseminated among
lower level functions.
And use page_to_phys() instead of open coding the calculation
of phys address to call flush_dcache_icache_phys().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5f063986e325d2efdd404b8f8c5f4bcbd4eb11a6.1617895813.git.christophe.leroy@csgroup.eu
The sparse tool complains as follows:
arch/powerpc/platforms/powernv/opal-core.c:74:16: warning:
symbol 'mpipl_kobj' was not declared.
This symbol is not used outside of opal-core.c, so marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409063855.57347-1-cuibixuan@huawei.com
Fix sparse warning:
arch/powerpc/xmon/xmon.c:4216:1: warning:
symbol 'spu_inst_dump' was not declared. Should it be static?
This symbol is not used outside of xmon.c, so make it static.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409070151.163424-1-pulehui@huawei.com
The sparse tool complains as follows:
arch/powerpc/perf/hv-24x7.c:229:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_flags' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:230:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_err' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:236:1: warning:
symbol '__pcpu_scope_hv_24x7_hw' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:244:1: warning:
symbol '__pcpu_scope_hv_24x7_reqb' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:245:1: warning:
symbol '__pcpu_scope_hv_24x7_resb' was not declared. Should it be static?
This symbol is not used outside of hv-24x7.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090124.59492-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/perf/isa207-common.c:24:18: warning:
symbol 'isa207_pmu_format_attr' was not declared. Should it be static?
This symbol is not used outside of isa207-common.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090119.59444-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/pmem.c:142:27: warning:
symbol 'drc_pmem_match' was not declared. Should it be static?
This symbol is not used outside of pmem.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090114.59396-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/hvCall_inst.c:29:1: warning:
symbol '__pcpu_scope_hcall_stats' was not declared. Should it be static?
This symbol is not used outside of hvCall_inst.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090109.59347-1-cuibixuan@huawei.com
According to LoPAR, ibm,query-pe-dma-window output named "IO Page Sizes"
will let the OS know all possible pagesizes that can be used for creating a
new DDW.
Currently Linux will only try using 3 of the 8 available options:
4K, 64K and 16M. According to LoPAR, Hypervisor may also offer 32M, 64M,
128M, 256M and 16G.
Enabling bigger pages would be interesting for direct mapping systems
with a lot of RAM, while using less TCE entries.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408201915.174217-1-leobras.c@gmail.com
Many architectures duplicate similar shell scripts.
This commit converts powerpc to use scripts/syscallhdr.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301153019.362742-2-masahiroy@kernel.org
Many architectures duplicate similar shell scripts.
This commit converts powerpc to use scripts/syscalltbl.sh. This also
unifies syscall_table_32.h and syscall_table_c32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301153019.362742-1-masahiroy@kernel.org
RTAS_RMOBUF_MAX doesn't actually describe a "maximum" value in any
sense. It represents the size of an area of memory set aside for user
space to use as work areas for certain RTAS calls.
Rename it to RTAS_USER_REGION_SIZE.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-6-nathanl@linux.ibm.com
Reduce conditionally compiled sections within rtas_initialize() by
moving the filter table initialization into its own function already
guarded by CONFIG_PPC_RTAS_FILTER. No behavior change intended.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-5-nathanl@linux.ibm.com
There's not a compelling reason to cache the value of the token for
the ibm,suspend-me function. Just look it up when needed in the RTAS
syscall's special case for it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-4-nathanl@linux.ibm.com
Add kerneldoc for ppc_rtas_rmo_buf_show(), the callback for
/proc/powerpc/rtas/rmo_buffer, explaining its expected use.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-2-nathanl@linux.ibm.com
During the EEH MMIO error checking, the current implementation fails to map
the (virtual) MMIO address back to the pci device on radix with hugepage
mappings for I/O. This results into failure to dispatch EEH event with no
recovery even when EEH capability has been enabled on the device.
eeh_check_failure(token) # token = virtual MMIO address
addr = eeh_token_to_phys(token);
edev = eeh_addr_cache_get_dev(addr);
if (!edev)
return 0;
eeh_dev_check_failure(edev); <= Dispatch the EEH event
In case of hugepage mappings, eeh_token_to_phys() has a bug in virt -> phys
translation that results in wrong physical address, which is then passed to
eeh_addr_cache_get_dev() to match it against cached pci I/O address ranges
to get to a PCI device. Hence, it fails to find a match and the EEH event
never gets dispatched leaving the device in failed state.
The commit 3343962068 ("powerpc/eeh: Handle hugepages in ioremap space")
introduced following logic to translate virt to phys for hugepage mappings:
eeh_token_to_phys():
+ pa = pte_pfn(*ptep);
+
+ /* On radix we can do hugepage mappings for io, so handle that */
+ if (hugepage_shift) {
+ pa <<= hugepage_shift; <= This is wrong
+ pa |= token & ((1ul << hugepage_shift) - 1);
+ }
This patch fixes the virt -> phys translation in eeh_token_to_phys()
function.
$ cat /sys/kernel/debug/powerpc/eeh_address_cache
mem addr range [0x0000040080000000-0x00000400807fffff]: 0030:01:00.1
mem addr range [0x0000040080800000-0x0000040080ffffff]: 0030:01:00.1
mem addr range [0x0000040081000000-0x00000400817fffff]: 0030:01:00.0
mem addr range [0x0000040081800000-0x0000040081ffffff]: 0030:01:00.0
mem addr range [0x0000040082000000-0x000004008207ffff]: 0030:01:00.1
mem addr range [0x0000040082080000-0x00000400820fffff]: 0030:01:00.0
mem addr range [0x0000040082100000-0x000004008210ffff]: 0030:01:00.1
mem addr range [0x0000040082110000-0x000004008211ffff]: 0030:01:00.0
Above is the list of cached io address ranges of pci 0030:01:00.<fn>.
Before this patch:
Tracing 'arg1' of function eeh_addr_cache_get_dev() during error injection
clearly shows that 'addr=' contains wrong physical address:
kworker/u16:0-7 [001] .... 108.883775: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x80103000a510
dmesg shows no EEH recovery messages:
[ 108.563768] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x9ae) != mcp_pulse (0x7fff)
[ 108.563788] bnx2x: [bnx2x_hw_stats_update:870(eth2)]NIG timer max (4294967295)
[ 108.883788] bnx2x: [bnx2x_acquire_hw_lock:2013(eth1)]lock_status 0xffffffff resource_bit 0x1
[ 108.884407] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
[ 108.884976] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
<..>
After this patch:
eeh_addr_cache_get_dev() trace shows correct physical address:
<idle>-0 [001] ..s. 1043.123828: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x40080bc7cd8
dmesg logs shows EEH recovery getting triggerred:
[ 964.323980] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x746f) != mcp_pulse (0x7fff)
[ 964.323991] EEH: Recovering PHB#30-PE#10000
[ 964.324002] EEH: PE location: N/A, PHB location: N/A
[ 964.324006] EEH: Frozen PHB#30-PE#10000 detected
<..>
Fixes: 3343962068 ("powerpc/eeh: Handle hugepages in ioremap space")
Cc: stable@vger.kernel.org # v5.3+
Reported-by: Dominic DeMarco <ddemarc@us.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161821396263.48361.2796709239866588652.stgit@jupiter
Instead of calling irq_create_mapping() to map the IPI for a node,
introduce an 'alloc' handler. This is usually an extension to support
hierarchy irq_domains which is not exactly the case for XIVE-IPI
domain. However, we can now use the irq_domain_alloc_irqs() routine
which allocates the IRQ descriptor on the specified node, even better
for cache performance on multi node machines.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-10-clg@kaod.org
ipistorm [*] can be used to benchmark the raw interrupt rate of an
interrupt controller by measuring the number of IPIs a system can
sustain. When applied to the XIVE interrupt controller of POWER9 and
POWER10 systems, a significant drop of the interrupt rate can be
observed when crossing the second node boundary.
This is due to the fact that a single IPI interrupt is used for all
CPUs of the system. The structure is shared and the cache line updates
impact greatly the traffic between nodes and the overall IPI
performance.
As a workaround, the impact can be reduced by deactivating the IRQ
lockup detector ("noirqdebug") which does a lot of accounting in the
Linux IRQ descriptor structure and is responsible for most of the
performance penalty.
As a fix, this proposal allocates an IPI interrupt per node, to be
shared by all CPUs of that node. It solves the scaling issue, the IRQ
lockup detector still has an impact but the XIVE interrupt rate scales
linearly. It also improves the "noirqdebug" case as showed in the
tables below.
* P9 DD2.2 - 2s * 64 threads
"noirqdebug"
Mint/s Mint/s
chips cpus IPI/sys IPI/chip IPI/chip IPI/sys
--------------------------------------------------------------
1 0-15 4.984023 4.875405 4.996536 5.048892
0-31 10.879164 10.544040 10.757632 11.037859
0-47 15.345301 14.688764 14.926520 15.310053
0-63 17.064907 17.066812 17.613416 17.874511
2 0-79 11.768764 21.650749 22.689120 22.566508
0-95 10.616812 26.878789 28.434703 28.320324
0-111 10.151693 31.397803 31.771773 32.388122
0-127 9.948502 33.139336 34.875716 35.224548
* P10 DD1 - 4s (not homogeneous) 352 threads
"noirqdebug"
Mint/s Mint/s
chips cpus IPI/sys IPI/chip IPI/chip IPI/sys
--------------------------------------------------------------
1 0-15 2.409402 2.364108 2.383303 2.395091
0-31 6.028325 6.046075 6.089999 6.073750
0-47 8.655178 8.644531 8.712830 8.724702
0-63 11.629652 11.735953 12.088203 12.055979
0-79 14.392321 14.729959 14.986701 14.973073
0-95 12.604158 13.004034 17.528748 17.568095
2 0-111 9.767753 13.719831 19.968606 20.024218
0-127 6.744566 16.418854 22.898066 22.995110
0-143 6.005699 19.174421 25.425622 25.417541
0-159 5.649719 21.938836 27.952662 28.059603
0-175 5.441410 24.109484 31.133915 31.127996
3 0-191 5.318341 24.405322 33.999221 33.775354
0-207 5.191382 26.449769 36.050161 35.867307
0-223 5.102790 29.356943 39.544135 39.508169
0-239 5.035295 31.933051 42.135075 42.071975
0-255 4.969209 34.477367 44.655395 44.757074
4 0-271 4.907652 35.887016 47.080545 47.318537
0-287 4.839581 38.076137 50.464307 50.636219
0-303 4.786031 40.881319 53.478684 53.310759
0-319 4.743750 43.448424 56.388102 55.973969
0-335 4.709936 45.623532 59.400930 58.926857
0-351 4.681413 45.646151 62.035804 61.830057
[*] https://github.com/antonblanchard/ipistorm
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-9-clg@kaod.org
When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.
Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.
Fixes: 97ef275077 ("powerpc/xive: Fix xmon support on the PowerNV platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org
Move the xmon routine under XIVE subsystem and rework the loop on the
interrupts taking into account the xive_irq_domain to filter out IPIs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-7-clg@kaod.org
When looping on IRQ descriptor, irq_data is always valid.
Fixes: 930914b7d5 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-6-clg@kaod.org
Now that the IPI interrupt has its own domain, the checks on the HW
interrupt number XIVE_IPI_HW_IRQ and on the chip can be replaced by a
check on the domain.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-5-clg@kaod.org
The IPI interrupt has its own domain now. Testing the HW interrupt
number is not needed anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-4-clg@kaod.org
The IPI interrupt is a special case of the XIVE IRQ domain. When
mapping and unmapping the interrupts in the Linux interrupt number
space, the HW interrupt number 0 (XIVE_IPI_HW_IRQ) is checked to
distinguish the IPI interrupt from other interrupts of the system.
Simplify the XIVE interrupt domain by introducing a specific domain
for the IPI.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-3-clg@kaod.org
The sparse tool complains as follows:
arch/powerpc/kernel/smp.c:86:1: warning:
symbol '__pcpu_scope_cpu_coregroup_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:125:1: warning:
symbol '__pcpu_scope_thread_group_l1_cache_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:132:1: warning:
symbol '__pcpu_scope_thread_group_l2_cache_map' was not declared. Should it be static?
These symbols are not used outside of smp.c, so this
commit marks them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125903.4139663-1-yukuai3@huawei.com
The sparse tool complains as follows:
arch/powerpc/kernel/mce.c:43:1: warning:
symbol 'mce_ue_event_work' was not declared. Should it be static?
This symbol is not used outside of mce.c, so this commit marks it
static.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408035802.31853-1-lihuafei1@huawei.com
The sparse tool complains as follows:
arch/powerpc/kernel/security.c:253:6: warning:
symbol 'stf_barrier' was not declared. Should it be static?
This symbol is not used outside of security.c, so this commit marks it
static.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408033951.28369-1-lihuafei1@huawei.com
On book3s/32, the segment below kernel text is used for module
allocation when CONFIG_STRICT_KERNEL_RWX is defined.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, use that segment below PAGE_OFFSET at all time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a46dcdd39a9e80b012d86c294c4e5cd8d31665f3.1617283827.git.christophe.leroy@csgroup.eu
On the 8xx, TASK_SIZE is 0x80000000. The space between TASK_SIZE
and PAGE_OFFSET is not used.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, define MODULES_VADDR and MODULES_END.
Set a 256Mb area just below PAGE_OFFSET, like book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a225606d5b3a8bc53fe612ad52c855c60b0a0a58.1617283827.git.christophe.leroy@csgroup.eu
On book3s/32, when STRICT_KERNEL_RWX is selected, modules are
allocated on the segment just before kernel text, ie on the
0xb0000000-0xbfffffff when PAGE_OFFSET is 0xc0000000.
On the 8xx, TASK_SIZE is 0x80000000. The space between TASK_SIZE and
PAGE_OFFSET is not used and could be used for modules.
The idea comes from ARM architecture.
Having modules just below PAGE_OFFSET offers an opportunity to
minimise the distance between kernel text and modules and avoid
trampolines in modules to access kernel functions or other module
functions.
When MODULES_VADDR is defined, powerpc has it's own module_alloc()
function. In that function, first try to allocate the module
above the limit defined by '_etext - 32M'. Then if the allocation
fails, fallback to the entire MODULES area.
DEBUG logs in module_32.c without the patch:
[ 1572.588822] module_32: Applying ADD relocate section 13 to 12
[ 1572.588891] module_32: Doing plt for call to 0xc00671a4 at 0xcae04024
[ 1572.588964] module_32: Initialized plt for 0xc00671a4 at cae04000
[ 1572.589037] module_32: REL24 value = CAE04000. location = CAE04024
[ 1572.589110] module_32: Location before: 48000001.
[ 1572.589171] module_32: Location after: 4BFFFFDD.
[ 1572.589231] module_32: ie. jump to 03FFFFDC+CAE04024 = CEE04000
[ 1572.589317] module_32: Applying ADD relocate section 15 to 14
[ 1572.589386] module_32: Doing plt for call to 0xc00671a4 at 0xcadfc018
[ 1572.589457] module_32: Initialized plt for 0xc00671a4 at cadfc000
[ 1572.589529] module_32: REL24 value = CADFC000. location = CADFC018
[ 1572.589601] module_32: Location before: 48000000.
[ 1572.589661] module_32: Location after: 4BFFFFE8.
[ 1572.589723] module_32: ie. jump to 03FFFFE8+CADFC018 = CEDFC000
With the patch:
[ 279.404671] module_32: Applying ADD relocate section 13 to 12
[ 279.404741] module_32: REL24 value = C00671B4. location = BF808024
[ 279.404814] module_32: Location before: 48000001.
[ 279.404874] module_32: Location after: 4885F191.
[ 279.404933] module_32: ie. jump to 0085F190+BF808024 = C00671B4
[ 279.405016] module_32: Applying ADD relocate section 15 to 14
[ 279.405085] module_32: REL24 value = C00671B4. location = BF800018
[ 279.405156] module_32: Location before: 48000000.
[ 279.405215] module_32: Location after: 4886719C.
[ 279.405275] module_32: ie. jump to 0086719C+BF800018 = C00671B4
We see that with the patch, no plt entries are set.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c3d5cb8a4dfdf6ca1b8aeb385c01470d6628d55.1617283827.git.christophe.leroy@csgroup.eu
While removing large number of mappings from hash page tables for
large memory systems as soft-lockup is reported because of the time
spent inside htap_remove_mapping() like one below:
watchdog: BUG: soft lockup - CPU#8 stuck for 23s!
<snip>
NIP plpar_hcall+0x38/0x58
LR pSeries_lpar_hpte_invalidate+0x68/0xb0
Call Trace:
0x1fffffffffff000 (unreliable)
pSeries_lpar_hpte_removebolted+0x9c/0x230
hash__remove_section_mapping+0xec/0x1c0
remove_section_mapping+0x28/0x3c
arch_remove_memory+0xfc/0x150
devm_memremap_pages_release+0x180/0x2f0
devm_action_release+0x30/0x50
release_nodes+0x28c/0x300
device_release_driver_internal+0x16c/0x280
unbind_store+0x124/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd4/0x270
ksys_write+0xdc/0x130
system_call+0x5c/0x70
Fix this by adding a cond_resched() to the loop in
htap_remove_mapping() that issues hcall to remove hpte mapping. The
call to cond_resched() is issued every HZ jiffies which should prevent
the soft-lockup from being reported.
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404163148.321346-1-vaibhav@linux.ibm.com
Add support for ND_REGION_ASYNC capability if the device tree
indicates 'ibm,hcall-flush-required' property in the NVDIMM node.
Flush is done by issuing H_SCM_FLUSH hcall to the hypervisor.
If the flush request failed, the hypervisor is expected to
to reflect the problem in the subsequent nvdimm H_SCM_HEALTH call.
This patch prevents mmap of namespaces with MAP_SYNC flag if the
nvdimm requires an explicit flush[1].
References:
[1] https://github.com/avocado-framework-tests/avocado-misc-tests/blob/master/memory/ndctl.py.data/map_sync.c
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use unsigned long / long instead of uint64_t/int64_t]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
But this will only work with platform devices. It will not work with
PCI devices (e.g. of an integrated root complex) and esp. not with DSA
ports.
There is an of_* variant of the nvmem binding which works without
devices. The returned data of a nvmem_cell_read() has to be freed after
use. On the other hand the return of_get_mac_address() points to some
static data without a lifetime. The trick for now, was to allocate a
device resource managed buffer which is then returned. This will only
work if we have an actual device.
Change it, so that the caller of of_get_mac_address() has to supply a
buffer where the MAC address is written to. Unfortunately, this will
touch all drivers which use the of_get_mac_address().
Usually the code looks like:
const char *addr;
addr = of_get_mac_address(np);
if (!IS_ERR(addr))
ether_addr_copy(ndev->dev_addr, addr);
This can then be simply rewritten as:
of_get_mac_address(np, ndev->dev_addr);
Sometimes is_valid_ether_addr() is used to test the MAC address.
of_get_mac_address() already makes sure, it just returns a valid MAC
address. Thus we can just test its return code. But we have to be
careful if there are still other sources for the MAC address before the
of_get_mac_address(). In this case we have to keep the
is_valid_ether_addr() call.
The following coccinelle patch was used to convert common cases to the
new style. Afterwards, I've manually gone over the drivers and fixed the
return code variable: either used a new one or if one was already
available use that. Mansour Moufid, thanks for that coccinelle patch!
<spml>
@a@
identifier x;
expression y, z;
@@
- x = of_get_mac_address(y);
+ x = of_get_mac_address(y, z);
<...
- ether_addr_copy(z, x);
...>
@@
identifier a.x;
@@
- if (<+... x ...+>) {}
@@
identifier a.x;
@@
if (<+... x ...+>) {
...
}
- else {}
@@
identifier a.x;
expression e;
@@
- if (<+... x ...+>@e)
- {}
- else
+ if (!(e))
{...}
@@
expression x, y, z;
@@
- x = of_get_mac_address(y, z);
+ of_get_mac_address(y, z);
... when != x
</spml>
All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
compile-time tested.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing fault exit label in unsafe_copy_from_user() in order to
avoid following build failure with CONFIG_SPE
CC arch/powerpc/kernel/signal_32.o
arch/powerpc/kernel/signal_32.c: In function 'restore_user_regs':
arch/powerpc/kernel/signal_32.c:565:36: error: macro "unsafe_copy_from_user" requires 4 arguments, but only 3 given
565 | ELF_NEVRREG * sizeof(u32));
| ^
In file included from ./include/linux/uaccess.h:11,
from ./include/linux/sched/task.h:11,
from ./include/linux/sched/signal.h:9,
from ./include/linux/rcuwait.h:6,
from ./include/linux/percpu-rwsem.h:7,
from ./include/linux/fs.h:33,
from ./include/linux/huge_mm.h:8,
from ./include/linux/mm.h:707,
from arch/powerpc/kernel/signal_32.c:17:
./arch/powerpc/include/asm/uaccess.h:428: note: macro "unsafe_copy_from_user" defined here
428 | #define unsafe_copy_from_user(d, s, l, e) \
|
arch/powerpc/kernel/signal_32.c:564:3: error: 'unsafe_copy_from_user' undeclared (first use in this function); did you mean 'raw_copy_from_user'?
564 | unsafe_copy_from_user(current->thread.evr, &sr->mc_vregs,
| ^~~~~~~~~~~~~~~~~~~~~
| raw_copy_from_user
arch/powerpc/kernel/signal_32.c:564:3: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/powerpc/kernel/signal_32.o] Error 1
Fixes: 627b72bee8 ("powerpc/signal32: Convert restore_[tm]_user_regs() to user access block")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aad2cb1801a3cc99bc27081022925b9fc18a0dfb.1618159169.git.christophe.leroy@csgroup.eu
Rather than clear the HV bit from the MSR at guest entry, make it clear
that the hypervisor does not allow the guest to set the bit.
The HV clear is kept in guest entry for now, but a future patch will
warn if it is set.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-13-npiggin@gmail.com
Rather than add the ME bit to the MSR at guest entry, make it clear
that the hypervisor does not allow the guest to clear the bit.
The ME set is kept in guest entry for now, but a future patch will
warn if it's not present.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-12-npiggin@gmail.com
The code being executed in KVM_GUEST_MODE_SKIP is hypervisor code with
MSR[IR]=0, so the faults of concern are the d-side ones caused by access
to guest context by the hypervisor.
Instruction breakpoint interrupts are not a concern here. It's unlikely
any good would come of causing breaks in this code, but skipping the
instruction that caused it won't help matters (e.g., skip the mtmsr that
sets MSR[DR]=0 or clears KVM_GUEST_MODE_SKIP).
[Paul notes: "the 0x1300 interrupt was dropped from the architecture a
long time ago and is not generated by P7, P8, P9 or P10." So add a
comment about this in the handler code while we're here. ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-11-npiggin@gmail.com
Cell does not support KVM.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-10-npiggin@gmail.com
This config option causes the warning in init_default_hcalls to fire
because the TCE handlers are in the default hcall list but not
implemented.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-9-npiggin@gmail.com
The va argument is not used in the function or set by its asm caller,
so remove it to be safe.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-8-npiggin@gmail.com
This SPR is set to 0 twice when exiting the guest.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-7-npiggin@gmail.com
