If peer announces shutdown, use the link group terminate worker for
local cleanup of link groups and connections to terminate link group
in proper context.
Make sure link groups are cleaned up first before destroying the
event queue of the SMCD device, because link group cleanup may
raise events.
Send signal shutdown only if peer has not done it already.
Send socket abort or close only, if peer has not already announced
shutdown.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that TX Coalesce has been rewritten we no longer need this
additional interrupt enabled. This reduces CPU usage.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coalesce logic currently increments the number of packets and sets the
IC bit when the coalesced packets have passed a given limit. This does
not reflect very well what coalesce was meant for as we can have a large
number of packets that are coalesced and then a single one, sent later
on that has the IC bit.
Rework the logic so that it coalesces only upon a limit of packets and
sets the IC bit for large number of packets.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tune-up the defalt coalesce settings for optimal values. This gives the
best performance in most of the use-cases.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFA and RFD should not be dependent on FIFO size. In fact, the more FIFO
space we have, the later we can activate Flow Control. Let's use
hard-coded values for RFA and RFD for all FIFO sizes with the exception
of 4k, which is a special case.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFA and RFD should not be dependent on FIFO size. In fact, the more FIFO
space we have, the later we can activate Flow Control. Let's use
hard-coded values for RFA and RFD for all FIFO sizes with the exception
of 4k, which is a special case.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For performance reasons, sometimes using the minimum RX Coalesce value
is not optimal. Lets setup a default value that is optimal in most of
the use cases.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We may only want to use the RX Watchdog so lets check if RX Coalesce
settings are non-zero and only set the RX Interrupt on Completion bit if
its not.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0c3cbbf96d ("mlxsw: Add specific trap for packets routed via
invalid nexthops") allocated an adjacency entry during driver
initialization whose purpose is to discard packets hitting the route
pointing to it.
These adjacency entries are allocated from a resource called KVD linear
(KVDL). There are situations in which the user can decide to set the
size of this resource (via devlink-resource) to 0, in which case the
driver will not be able to load.
Therefore, instead of pre-allocating this adjacency entry, simply
allocate it only when needed. A variable indicating the validity of the
entry is added and is used to ensure it is only allocated and written
once and that it is freed after all the routes were flushed.
Fixes: 0c3cbbf96d ("mlxsw: Add specific trap for packets routed via invalid nexthops")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If PROC_FS is not set, gcc warning this:
net/tls/tls_proc.c:23:12: warning:
'tls_statistics_seq_show' defined but not used [-Wunused-function]
Use #ifdef to guard this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
s390/qeth: updates 2019-11-14
please apply the following qeth patches to net-next.
Along with the usual cleanups, this
(1) reduces collateral packet loss in the RX path when dealing with
bad packets and/or allocation errors, and
(2) simplifies how the L3 driver deals with mcast IP addresses.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Given the way how the sysfs attributes are registered / unregistered,
the show/store helpers will never be called with a NULL drvdata.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The remaining usage effectively is a kmemdup() of the query object.
By not wrapping it, some of the callers can now use GFP_KERNEL for the
allocation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use vlan_for_each() instead of tracking each registered VID internally.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code processes each (VLAN) device twice - once to inspect the
IPv4 mcast addresses, and then a second time to walk the IPv6 mcast
addresses. Unify all this into a single helper, thus removing some
checks and a duplicated VLAN lookup.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trust the IPv4/IPv6 code to properly remove its mcast addresses when a
VLAN device is unregistered, and then also trigger an RX modeset
whenever it's needed.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Push the inet6_dev locking down into the helper that actually needs it
for walking the mc_list.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_core_free_card() is meant to be the counterpart of
qeth_alloc_card() - but unfortunately was also picked as the place
to free the QDIO queues.
This gets messy when qeth_core_probe_device() fails during
qeth_add_dbf_entry(). At this point the card->qdio.state is not initialized
yet, so qeth_free_qdio_queues() ends up operating on uninitialized data.
Luckily for now, the whole qeth_card struct is zero-allocated and the value
of the QETH_QDIO_UNINITIALIZED enum is 0 as well. So there's no real impact
from this bug at the moment, it's just really fragile.
Clean this up by moving the qeth_free_qdio_queues() call up one level in
the hierarchy. This way it doesn't get called from the error path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When current code fails to allocate an skb in the RX path, it drops the
whole RX buffer. Considering the large number of packets that a single
RX buffer might contain, this is quite drastic.
Skip over the packet instead, and try to extract the next packet from
the RX buffer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packets with an unexpected HW format are currently first extracted from
the RX buffer, passed upwards to the layer-specific driver and only then
finally dropped.
Enhance the RX path so that we can drop such packets before even
allocating an skb. For this, add some additional logic so that when a
packet is meant to be dropped, we can still walk along the packet's data
chunks in the RX buffer. This allows us to extract the following
packet(s) from the buffer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each RX buffer may contain up to 64KB worth of data. In case the device
needs to discard a packet _after_ already having reserved space for it
in the buffer, the whole buffer gets set to ERROR state. As the buffer
might contain any number of good packets, this can result in collateral
packet loss.
qeth can provide relief by enabling per-frame invalidation. The RX
buffer is then presented as usual, we just need to spot & drop any
individual packet that was flagged as invalid.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Where available, use the fine-grained counters in rtnl_link_stats64 to
indicate different RX error causes. For drop reasons, use driver-private
ethtool counters.
In particular this patch allows us to keep track of driver-side drops due
to unknown/unsupported HW descriptor format.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella says:
====================
vsock: add multi-transports support
Most of the patches are reviewed by Dexuan, Stefan, and Jorgen.
The following patches need reviews:
- [11/15] vsock: add multi-transports support
- [12/15] vsock/vmci: register vmci_transport only when VMCI guest/host
are active
- [15/15] vhost/vsock: refuse CID assigned to the guest->host transport
RFC: https://patchwork.ozlabs.org/cover/1168442/
v1: https://patchwork.ozlabs.org/cover/1181986/
v1 -> v2:
- Patch 11:
+ vmci_transport: sent reset when vsock_assign_transport() fails
[Jorgen]
+ fixed loopback in the guests, checking if the remote_addr is the
same of transport_g2h->get_local_cid()
+ virtio_transport_common: updated space available while creating
the new child socket during a connection request
- Patch 12:
+ removed 'features' variable in vmci_transport_init() [Stefan]
+ added a flag to register only once the host [Jorgen]
- Added patch 15 to refuse CID assigned to the guest->host transport in
the vhost_transport
This series adds the multi-transports support to vsock, following
this proposal: https://www.spinics.net/lists/netdev/msg575792.html
With the multi-transports support, we can use VSOCK with nested VMs
(using also different hypervisors) loading both guest->host and
host->guest transports at the same time.
Before this series, vmci_transport supported this behavior but only
using VMware hypervisor on L0, L1, etc.
The first 9 patches are cleanups and preparations, maybe some of
these can go regardless of this series.
Patch 10 changes the hvs_remote_addr_init(). setting the
VMADDR_CID_HOST as remote CID instead of VMADDR_CID_ANY to make
the choice of transport to be used work properly.
Patch 11 adds multi-transports support.
Patch 12 changes a little bit the vmci_transport and the vmci driver
to register the vmci_transport only when there are active host/guest.
Patch 13 prevents the transport modules unloading while sockets are
assigned to them.
Patch 14 fixes an issue in the bind() logic discoverable only with
the new multi-transport support.
Patch 15 refuses CID assigned to the guest->host transport in the
vhost_transport.
I've tested this series with nested KVM (vsock-transport [L0,L1],
virtio-transport[L1,L2]) and with VMware (L0) + KVM (L1)
(vmci-transport [L0,L1], vhost-transport [L1], virtio-transport[L2]).
Dexuan successfully tested the RFC series on HyperV with a Linux guest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In a nested VM environment, we have to refuse to assign to a nested
guest the same CID assigned to our guest->host transport.
In this way, the user can use the local CID for loopback.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we are looking for a socket bound to a specific address,
we also have to take into account the CID.
This patch is useful with multi-transports support because it
allows the binding of the same port with different CID, and
it prevents a connection to a wrong socket bound to the same
port, but with different CID.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds 'module' member in the 'struct vsock_transport'
in order to get/put the transport module. This prevents the
module unloading while sockets are assigned to it.
We increase the module refcnt when a socket is assigned to a
transport, and we decrease the module refcnt when the socket
is destructed.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To allow other transports to be loaded with vmci_transport,
we register the vmci_transport as G2H or H2G only when a VMCI guest
or host is active.
To do that, this patch adds a callback registered in the vmci driver
that will be called when the host or guest becomes active.
This callback will register the vmci_transport in the VSOCK core.
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the support of multiple transports in the
VSOCK core.
With the multi-transports support, we can use vsock with nested VMs
(using also different hypervisors) loading both guest->host and
host->guest transports at the same time.
Major changes:
- vsock core module can be loaded regardless of the transports
- vsock_core_init() and vsock_core_exit() are renamed to
vsock_core_register() and vsock_core_unregister()
- vsock_core_register() has a feature parameter (H2G, G2H, DGRAM)
to identify which directions the transport can handle and if it's
support DGRAM (only vmci)
- each stream socket is assigned to a transport when the remote CID
is set (during the connect() or when we receive a connection request
on a listener socket).
The remote CID is used to decide which transport to use:
- remote CID <= VMADDR_CID_HOST will use guest->host transport;
- remote CID == local_cid (guest->host transport) will use guest->host
transport for loopback (host->guest transports don't support loopback);
- remote CID > VMADDR_CID_HOST will use host->guest transport;
- listener sockets are not bound to any transports since no transport
operations are done on it. In this way we can create a listener
socket, also if the transports are not loaded or with VMADDR_CID_ANY
to listen on all transports.
- DGRAM sockets are handled as before, since only the vmci_transport
provides this feature.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remote peer is always the host, so we set VMADDR_CID_HOST as
remote CID instead of VMADDR_CID_ANY.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vsock_insert_unbound() was called only when 'sock' parameter of
__vsock_create() was not null. This only happened when
__vsock_create() was called by vsock_create().
In order to simplify the multi-transports support, this patch
moves vsock_insert_unbound() at the end of vsock_create().
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All transports call __vsock_create() with the same parameters,
most of them depending on the parent socket. In order to simplify
the VSOCK core APIs exposed to the transports, this patch adds
the vsock_create_connected() callable from transports to create
a new socket when a connection request is received.
We also unexported the __vsock_create().
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virtio_transport and vmci_transport handle the buffer_size
sockopts in a very similar way.
In order to support multiple transports, this patch moves this
handling in the core to allow the user to change the options
also if the socket is not yet assigned to any transport.
This patch also adds the '.notify_buffer_size' callback in the
'struct virtio_transport' in order to inform the transport,
when the buffer_size is changed by the user. It is also useful
to limit the 'buffer_size' requested (e.g. virtio transports).
Acked-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since now the 'struct vsock_sock' object contains a pointer to
the transport, this patch adds a parameter to the
vsock_core_get_transport() to return the right transport
assigned to the socket.
This patch modifies also the virtio_transport_get_ops(), that
uses the vsock_core_get_transport(), adding the
'struct vsock_sock *' parameter.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are going to add 'struct vsock_sock *' parameter to
virtio_transport_get_ops().
In some cases, like in the virtio_transport_reset_no_sock(),
we don't have any socket assigned to the packet received,
so we can't use the virtio_transport_get_ops().
In order to allow virtio_transport_reset_no_sock() to use the
'.send_pkt' callback from the 'vhost_transport' or 'virtio_transport',
we add the 'struct virtio_transport *' to it and to its caller:
virtio_transport_recv_pkt().
We moved the 'vhost_transport' and 'virtio_transport' definition,
to pass their address to the virtio_transport_recv_pkt().
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparation to support multiple transports, this patch adds
the 'transport' member at the 'struct vsock_sock'.
This new field is initialized during the creation in the
__vsock_create() function.
This patch also renames the global 'transport' pointer to
'transport_single', since for now we're only supporting a single
transport registered at run-time.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This header file now only includes the "uapi/linux/vm_sockets.h".
We can include directly it when needed.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vm_sockets_get_local_cid() is only used in virtio_transport_common.c.
We can replace it calling the virtio_transport_get_ops() and
using the get_local_cid() callback registered by the transport.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VSOCK_DEFAULT_CONNECT_TIMEOUT definition was introduced with
commit d021c34405 ("VSOCK: Introduce VM Sockets"), but it is
never used in the net/vmw_vsock/vmci_transport.c.
VSOCK_DEFAULT_CONNECT_TIMEOUT is used and defined in
net/vmw_vsock/af_vsock.c
Cc: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham says:
====================
octeontx2-af: Debugfs support and updates to parser profile
This patchset adds debugfs support to dump various HW state machine info
which helps in debugging issues. Info includes
- Current queue context, stats, resource utilization etc
- MCAM entry utilization, miss and pkt drop counter
- CGX ingress and egress stats
- Current RVU block allocation status
- etc.
Rest patches has changes wrt
- Updated packet parsing profile for parsing more protocols.
- RSS algorithms to include inner protocols while generating hash
- Handle current version of silicon's limitations wrt shaping, coloring
and fixed mapping of transmit limiter queue's configuration.
- Enable broadcast packet replication to PF and it's VFs.
- Support for configurable NDC cache waymask
- etc
Changes from v1:
Removed inline keyword for newly introduced APIs in few patches.
- Suggested by David Miller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Traffic for a CGX mapped NIXLF can be stopped by disabling entries
in NPC MCAM or by configuring CGX and mailbox messages exist for the
two options. If traffic is stopped at CGX then VFs of that PF are
also effected hence CGX traffic should be started/stopped by
tracking all the users of it. This patch implements that CGX users
tracking. CGX is also configured along with NPC if required.
Also removed a check which mandates even number of LBK VFs.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A config option is added to disable caching of dynamic entries
like SQEs and stack pages. Also locks down all HW contexts in NDC,
preventing them from being evicted.
This option is useful when the queue count is large and there are
huge NDC cache misses. It's trade off between SQ context misses and
dynamically changing entries like SQE and stack page pointers.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each of the NIX/NPA LFs can choose which ways of their respective
NDC caches should be used to cache their contexts. This enables
flexible configurations like disabling caching for a LF, limiting
it's context to a certain set of ways etc etc. Separate way_mask
for NIX-TX and NIX-RX is not supported.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ingress packet replication support has been added to 96xx B0
silicon. This patch enables using that feature to replicate
ingress broadcast packets to PF and it's VFs.
Also fixed below issues
- VFs can also install NPC MCAM entry to forward broadcast pkts.
Otherwise, unless PF's interface is UP, VFs will not receive
bcast packets.
- NPC MCAM entry is disabled when PF and all it's VFs are down.
- Few corner cases in installing multicast entry list.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CN96xx initial silicon doesn't support all features pertaining to
NIX transmit scheduling and shaping.
- It supports a fixed topology of 1:1 mapped transmit
limiters at all levels.
- Supports DWRR only at SMQ/MDQ and TL1.
- Doesn't support shaping and coloring.
This patch adds HW capability structure by which each variant
and skew of silicon can be differentiated by their supported
features. And adds support for A0 silicon's transmit scheduler
capabilities or rather limitations.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for few more RSS key types for flow key
algorithm to compute rss hash index.
Following flow key types have been added.
- Tunnel types like NVGRE, VXLAN, GENEVE.
- L2 offload type ETH_DMAC, Here we will consider only DMAC 6 bytes.
- And extension header IPV6_EXT (1 byte followed by IPV6 header
- Hashing inner protocol fields for inner DMAC, IPv4/v6, TCP, UDP, SCTP.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Writing into NPC MCAM1 and MCAM0 registers are suppressed if
they happened to form a reserved combination. Hence
clear and disable MCAM entries before update.
For HRM:
[CAM(1)]<n>=1, [CAM(0)]<n>=1: Reserved.
The reserved combination is not allowed. Hardware suppresses any
write to CAM(0) or CAM(1) that would result in the reserved combination for
any CAM bit.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updated NPC KPU packet parsing profile with support for following
- Fragmentation support for IPv4 IPv6 outer header
- NIX instruction header support
- QinQ with TPID of 0x8100 as non inner most vlan tag, as legacy
network equipments still generate QinQ packets with this configuration.
- To better support RSS for tunnelled packets, udp based tunnel
protocols such as vxlan, vxlan-gpe, geneve and gtpu are now
captured into a separate layer E. Consequently, the inner
packet headers are pushed one layer down to LF, LG, and LH
accordingly.
- Support for rfc7510 mpls in udp. Up to 4 MPLS labels can be parsed
and captured in one layer LE.
- Parser support for DSA, extended DSA and eDSA tags right after
ethernet header by Marvell SOHO and Falcon switches. For extended
DSA and eDSA tags, a special PKIND of 62 is used, as these tags don't
contain a tpid field.
- Higig2 protocol header parsing support, added a NPC_LT_LA_HIGIG2_ETHER
for a combined header of HIGIG2 and Ethernet. Add a
NPC_LT_LA_IH_NIX_HIGIG2_ETHER for a combined header of nix_ih,
HIGIG2 and Ethernet on egress side. Also added 2 upper flags in LA to
indicate the presence of nix_ih and HIGIG2.
Other changes include
- IPv4.TTL==0 IPv6.HLIM==0 check
- Per RFC 1858, mark fragment offset == 1 as error
- TCP invalid flags check
- Separate error codes for outer and inner IPv4 checksum errors.
- Fix a parser error when KPU parses incoming IPSec ESP and AH packets
- NPC vtag capture/strip hardware expect tag pointer to point to
tpid/ethertype instead of tci. So move lb_ptr to point to tpid/ethertype.
- Fix npc parser error when parsing udp packets that don't have any payload.
- For a single MCAM entry to match on packets with one or stacked vlan tags
combine NPC_LT_LB_STAG and NPC_LT_LB_QINQ to NPC_LT_LB_STAG_QINQ.
- NVGRE to have a separate ltype LD_NVGRE instead of combined with LD_GRE.
- Reserve top LD/LTYPEs to support custom KPU profile fields.
Signed-off-by: Hao Zheng <haoz@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For every mailbox handler added to rvu, we are adding a function
declaration in rvu header file. Cleaned this up by adding a macro
to generate these declarations automatically.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If mailbox client has a bounce buffer or a intermediate buffer where
mbox messages are framed then copy them from there to HW buffer.
If 'mbase' and 'hw_mbase' are not same then assume 'mbase' points to
bounce buffer.
This patch also adds msg_size field to mbox header to copy only valid
data instead of whole buffer.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
