Push the interlaced frame calculation down into armada_drm_plane_calc()
which needs to apply the same correction for both the overlay and
primary planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Provide the framebuffer pitches from armada_drm_plane_calc_addrs() as
well as the base addresses for each plane. Since this is now about
more than just addresses, rename to armada_drm_plane_calc().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_plane_calc_addrs() gets all its information from the plane
state, so it makes sense to pass the plane state pointer down into this
function, rather than extracting the information in identical ways,
sometimes a couple of layers up.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the armada_drm_mode_config_funcs to armada_drv.c, since this now
has less to do with FBs than it does with general mode configuration.
In doing so, we need to make armada_fb_create() visible to armada_drv.c,
which reveals a function name clash with armada_fbdev.c. Rename the
version in armada_fbdev.c.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use the DRM standard plane properties for specifying the YUV
colour encoding parameter. Our colour range is fixed at limited
range.
Since we are transitioning to atomic modeset, we need to explicitly
add handling of these properties to our atomic_set_property() method,
but once the transition is complete, these will be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Remove the unused CRTC colourspace properties - userspace does not make
use of these. In any case, these are not a property of the CRTC, since
they demonstrably only affect the video (overlay) plane, irrespective
of the format of the graphics (primary) plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane colorkey properties into the plane state,
keeping the existing driver behaviour to avoid breaking userspace.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the contrast, brightness, and saturation properties to the overlay
plane state structure, and call our overlay commit function to update
the hardware via the planes atomic_update() method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Rather than tracking the register state, we can now check the previous
state and decide which registers need updating from that since the old
plane state indicates the previous state which was programmed into the
hardware.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Now that we have the CRTC using the atomic modeset transitional helper,
there is no need to build a temporary crtc state anymore - we can use
the CRTC atomic state directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The overlay plane support updates asynchronously to the request, but the
drm_plane_helper_update() transitional helper waits for a vblank event
before releasing the framebuffer. Using the transitional helper would
make the call block, which would introduce a performance regression.
Convert the overlay plane update to use the atomic state structures and
methods for the plane, but implement our own legacy update method
rather than the transitional helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
page_flip requests happen asynchronously, so we can't wait on the
vblank event before returning to userspace, as the transitional plane
update helper would do. Craft our own implementation that keeps the
asynchronous behaviour of this request, while making use of the atomic
infrastructure for the primary plane update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the primary plane as a whole to use its atomic state and the
transitional helpers. The CRTC is also switched to use the transitional
helpers for mode_set() and mode_set_base().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reset the atomic state of any converted components during driver
initialisation to ensure that we have the atomic state initialised for
any component converted to atomic modeset.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_gra_plane_regs() is now only ever called from within
armada_drm_primary_update_state(), so merge it into this function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use the core of the update_plane method to configure the primary plane
within mode_set() rather than duplicating this code. This moves us
closer to the same code structure that the atomic modeset transitional
helpers will use.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the mode set vblank handling and controller enable/disable to the
prepare() and commit() callbacks. This will be needed when we move to
mode_set_nofb() as we should not enable the controller without the
plane coordinates and location having been properly updated.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
drm_mode_page_flip_ioctl() already takes care of checking the
framebuffer format, and also assigns primary->fb after a successful
call to this handler. These are both redundant, and can be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct. For now, this is just documenting that the
function returns a VM_FAULT value rather than an errno. Once all
instances are converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Previously vm_insert_pfn() returns err which driver mapped into
VM_FAULT_* type. The new function vmf_insert_pfn() will replace this
inefficiency by returning VM_FAULT_* type.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Currently, vkms shows an error message if the following steps occur: (1)
load vkms, (2) perform any specific operation in the vkms (e.g., run an
IGT test), and (3) unload the module. The following error message
emerges:
[drm:drm_mode_config_cleanup [drm]] *ERROR* connector Virtual-1 leaked!
This commit fixes this error by calling drm_atomic_helper_shutdown()
before drm_mode_config_cleanup, which turns off the whole display
pipeline and remove a reference related to any connector.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719004045.hzepp565x5lfco3c@smtp.gmail.com
This patch cleans up spaces and align the text to refine the comment for
amdgpu_ttm.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pass the evict flag instead of hard code
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Every set_pages_array_wb call resulted in cross-core
interrupts and TLB flushes. Merge more of them for
less overhead.
This reduces the time needed to free a 1.6 GiB GTT WC
buffer as part of Vulkan CTS from ~2 sec to < 0.25 sec.
(Allocation still takes more than 2 sec though)
(v2): use set_pages_wb instead of set_memory_wb.
Signed-off-by: Bas Nieuwenhuizen <basni@chromium.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_page_alloc.c.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_page_alloc_dma.c.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle cases where one or more instance of the IP
block may be harvested.
v2: make sure ip_num_rings is initialized amdgpu_queue_mgr.c
v3: rebase on Christian's UVD changes, drop unused var
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This structure needs to align with structure in atomfirmware table.
Update it.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR_SET command is sent to the microcontroller in order to initialize
parameters needed for PSR feature, such as telling the microcontroller
which pipe is driving the PSR supported panel. When this command is
skipped or fails, the microcontroller may program the wrong thing if
driver tries to enable PSR.
[How]
If PSR_SET fails, do not set psr_enable flag to indicate the feature is
not yet initialized.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The sequence is slightly changed when bring .set_bandwidth out
from the end of programming backend to the end of programming
surface. Vega10 doesn't like to get clocks updated if
stream_count is zero in the current context (Atomic Reset).
[How]
Do not update clocks if no stream is showing up in the context.
Fixes 1b2b130192 "dc: Remove 300Mhz minimum disp clk limit."
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
engine and aux_engine are unnecessary layers we want to remove this
layer.
[How]
flatten engine and aux engine structs into one struct called
aux_engine and remove all references to the engine struct.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some receivers seem to fail the first link training but are good on
subsequent tries. We want to retry link training again. This fixes
HTC vive pro not lighting up after being disabled.
[How]
Check if the link training passed without fall back if this is not
the case then we retry link training.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Patch the IBs for the second UVD instance so that userspace don't need
to care about the instance they submit to.
v2: use direct IB patching
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to need that for the second UVD instance on Vega20.
v2: rename to patch_cs_in_place
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
-----BEGIN PGP SIGNATURE-----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=EhHj
-----END PGP SIGNATURE-----
Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', 'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged
Immutable branch (mfd, chrome) due for the v4.19 window
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
- Change g2d driver to component based driver
. g2d driver was last customed sub driver so this patch series
changes it to component based driver, which also makes gem handling
to be more simplify.
- Cleanup of Exynos DRM suspend/resume
. Register exynos drm core suspend/resume functions
to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
callbacks to ensure exynos_drm_suspend() is called before any suspend
callback from the real devices to avoid some issues on boards with
complex pipelines.
. Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
to ensure that resources of each devices will be released
for the system PM suspend/resume cycle.
- Remove local value not used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h0gl
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Cleanups
- Change g2d driver to component based driver
. g2d driver was last customed sub driver so this patch series
changes it to component based driver, which also makes gem handling
to be more simplify.
- Cleanup of Exynos DRM suspend/resume
. Register exynos drm core suspend/resume functions
to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
callbacks to ensure exynos_drm_suspend() is called before any suspend
callback from the real devices to avoid some issues on boards with
complex pipelines.
. Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
to ensure that resources of each devices will be released
for the system PM suspend/resume cycle.
- Remove local value not used.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532505748-10025-1-git-send-email-inki.dae@samsung.com
- Remove the unused struct imx_drm_crtc and the unused pipes field
from imx_drm_device and replace drm_dev_unref with drm_dev_put.
- Extend CSI configuration to support RGB888 and BGR888 capture,
as well as 16-bit RGB565 capture via a parallel bus.
- Add CPMEM support for negative interlace offsets, which is
necessary to support writing captured bottom-top interlaced
fields to memory with interleaved lines.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCW1G7LxgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsBNlQD9FofVPjKCFW79jy/H2bf+hWVB
uGhLAxfSsHmLLUSi7Z8A/jFtafSMQDU8uNNbTTHNjofKiFqdjpUljCUgTuA1paUC
=oPJE
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: cleanup and csi improvements
- Remove the unused struct imx_drm_crtc and the unused pipes field
from imx_drm_device and replace drm_dev_unref with drm_dev_put.
- Extend CSI configuration to support RGB888 and BGR888 capture,
as well as 16-bit RGB565 capture via a parallel bus.
- Add CPMEM support for negative interlace offsets, which is
necessary to support writing captured bottom-top interlaced
fields to memory with interleaved lines.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532100583.3438.9.camel@pengutronix.de
- Disable the LVDS Display Bridge (LDB) on driver bind. This is
necessary to guarantee correct LVDS signals in case the bootloader
left the LVDS output active.
- Remove false positive warning about disabled second LVDS channel in
dual-channel mode. In this mode, the second LVDS channel can not be
used separately. If the second channel is correctly described as
disabled in the device tree, the driver warned about this anyway.
- Fix the CSI confiuration to not only enable interlaced capture mode
for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the
V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried
to capture progressive frames in that case.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCW1G4zRgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsCZSgEAhIjcChl3NqsgqDzs4H1Pj+42
WS0OAHA6FSo5Jt1mthoA/jUbHp3tpEu1S4z1bUm3Hi5cifmZX2Jg/QLjsF4hzewK
=6eNq
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: imx-drm ldb and ipu-v3 csi fixes
- Disable the LVDS Display Bridge (LDB) on driver bind. This is
necessary to guarantee correct LVDS signals in case the bootloader
left the LVDS output active.
- Remove false positive warning about disabled second LVDS channel in
dual-channel mode. In this mode, the second LVDS channel can not be
used separately. If the second channel is correctly described as
disabled in the device tree, the driver warned about this anyway.
- Fix the CSI confiuration to not only enable interlaced capture mode
for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the
V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried
to capture progressive frames in that case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532100423.3438.8.camel@pengutronix.de
The vblank on/off calls were missing in dpu_crtc
leading to "driver forgot to call drm_crtc_vblank_off()"
warning while entering suspend state.
Also handle the state update completion event for
a crtc being disabled in current atomic commit.
This patch depends on https://www.spinics.net/lists/dri-devel/msg182402.html
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).
MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).
The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):
MDSS
+---------------------------------+
| +-----------------------------+ |
| | DPU | |
| | +--------+ +--------+ | |
| | | SSPP | | SSPP | | |
| | +----+---+ +----+---+ | |
| | | | | |
| | +----v-----------v---+ | |
| | | Layer Mixer (LM) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | PingPong (PP) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | INTERFACE (VIDEO) | | |
| | +---+----------------+ | |
| +------|----------------------+ |
| | |
| +------|---------------------+ |
| | | DISPLAY PERIPHERALS | |
| | +---v-+ +-----+ | |
| | | DSI | | DP | | |
| | +-----+ +-----+ | |
| +----------------------------+ |
+---------------------------------+
The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.
Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
capable of performing format conversion, scaling and quality improvement
for source surfaces.
* Layer Mixer (LM):
Blend source surfaces together (in requested zorder)
* PingPong (PP):
This block controls frame done interrupt output, EOL and EOF generation,
overflow/underflow control.
* Display interface (INTF):
Timing generator and interface connecting the display peripherals.
DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs
Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
- Dual pipe: Output from two LMs combined to single display.
- Split display: Output from two LMs connected to two separate
interfaces.
The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.
Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Used by the dpu driver for custom suspend/resume.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this out of the megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Called right before wait_for_commit_done() to perform kickoff for
active crtcs.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this out of the megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
dpu uses these elsewhere in the driver (in addition to increasing
MAX_PLANES, that'll come later), so pull them out into #define.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul pulled this out of the dpu megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This simplifies cleanup, to make sure nothing drops out in case of
error.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split out of dpu megapatch and renamed labels]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Useful for incoming DPU support
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this from the dpu megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
I missed this during the atomic conversion
Changes in v3:
- None
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Make the pclk_rate u64 to accommodate higher pixel clock
rates.
Changes in v3:
- Converted pclk_rate to u32 (Archit)
- Rebase on dsi cleanup set in msm-next
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Enable drm core zpos normalization for planes.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
SoCs having mdp5 or dpu have identical tree like
device hierarchy where MDSS top level wrapper manages
common power resources for all child devices.
Subclass msm_mdss so that msm_mdss includes common defines
and mdp5/dpu mdss derivations to include any extensions.
Add mdss helper interface (msm_mdss_funcs) to msm_mdss
base for mdp5/dpu mdss specific implementation calls.
This change subclasses msm_mdss for mdp5, dpu specific
changes will be done separately.
Changes in v3:
- Added Archit's R-b
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
[seanpaul rebased on msm-next and resolved conflicts]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
DPU doesn't use this, so push it into the mdp drivers.
Changes in v3:
- None
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currently, DRM bridge for DPU relies on the default video
mode setting to set the encoder mode.
Add an explicit call to set the encoder mode for bridges.
Changes in v3:
- None
Reviewed-by: Archit Taneja <architt@codeauorora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
postdiv_lock spinlock was used before initialization
for 10nm pll. It causes following spin_bug:
"BUG: spinlock bad magic on CPU#0".
Initialize spinlock before its usage.
Changes in v3:
- Added Archit's R-b
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Current DSI driver uses two connectors for dual DSI case even
though we only have one panel. Fix this by implementing one
connector/bridge for dual DSI use case. Use master DSI
controllers to register one connector/bridge.
Changes in v3:
- None
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
[seanpaul removed unused local var causing a build warning]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
For dual dsi mode, the horizontal timing needs
to be divided by half since both the dsi controllers
will be driving this panel. Adjust the pixel clock and
DSI timing accordingly.
Changes in v3:
- Added Archit's R-b
- Rebase on dsi cleanup set in msm-next
Cc: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
On GLK NUC platforms the HDMI retiming buffer needs additional disabled
time to correctly sync to a faster incoming signal.
When measured on a scope the highspeed lines of the HDMI clock turn off
for ~400uS during a normal resolution change. The HDMI retimer on the
GLK NUC appears to require at least a full frame of quiet time before a
new faster clock can be correctly sync'd. Wait 100ms due to msleep
inaccuracies while waiting for a completed frame. Add a quirk to the
driver for GLK boards that use ITE66317 HDMI retimers.
V2: Add more devices to the quirk list
V3: Delay increased to 100ms, check to confirm crtc type is HDMI.
V4: crtc type check extended to include _DDI and whitespace fixes
v5: Fix white spaces, remove the macro for delay. Revert the crtc type
check introduced in v4.
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Daniel Scheller <d.scheller.oss@gmail.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com
(cherry picked from commit 90c3e21987)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is
never called in atomic context.
cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not
necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The address printed is the actual address, not the page.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scheduler of the entity is decided by the run queue on which
it is queued. This patch avoids us the effort required to maintain
a sync between rq and sched field when we start shifting entites
among different rqs.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
entity has a scheduler field and we don't need the sched argument
in any of the functions where entity is provided.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make struct amdgpu_bo a bit smaller.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just rename functions, no functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Going to completely rework the context to ring mapping with Nayan's GSoC
work, but for now just stopping to expose the second UVD instance should
do it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to bitcast a boolean and even if we should use "!!" instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed to ensure ->is_unity is correct when the plane was
previously configured to output a multi-planar format with scaling
enabled, and is then being reconfigured to output a uniplanar format.
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com
drm_atomic_helper_async_check() declares the plane, old_plane_state and
new_plane_state variables to iterate over all planes of the atomic
state and make sure only one plane is enabled.
Unfortunately gcc is not smart enough to figure out that the check on
n_planes is enough to guarantee that plane, new_plane_state and
old_plane_state are initialized.
Explicitly initialize those variables to NULL to make gcc happy.
Fixes: fef9df8b59 ("drm/atomic: initial support for asynchronous plane update")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133300.32023-1-boris.brezillon@bootlin.com
Async plane update is supposed to work only when updating the FB or FB
position of an already enabled plane. That does not apply to requests
where the plane was previously disabled or assigned to a different
CTRC.
Check old_plane_state->crtc value to make sure async plane update is
allowed.
Fixes: fef9df8b59 ("drm/atomic: initial support for asynchronous plane update")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133215.31917-1-boris.brezillon@bootlin.com
After enabling DSC we need to send compression mode command packet
and pps data packet, for which 2 new data types are added
07h Compression Mode Data Type Write , short write, 2 parameters
0Ah PPS Long Write (word count determines number of bytes)
This patch adds support to send these packets.
Cc: David Airlie <airlied@linux.ie>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Changes in v3:
- None
Signed-off-by: vkorjani <vikas.korjani@intel.com>
[seanpaul removed pps_write_buffer fn, added types to packet_format helpers]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
modesetting X11 driver may provide negative x/y cordinates in
mdp5_crtc_cursor_move call when rotation is enabled.
Cursor buffer can overlap down to its negative width/height.
ROI has to be recalculated for negative x/y indicating using the
lower/right corner of the cursor buffer and hotspot must be set
in MDP5_LM_CURSOR_XY_SRC_Y MDP5_LM_CURSOR_XY_SRC_X.
Signed-off-by: Carsten Behling <carsten.behling@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Replace version checks with the helper functions bound to
cfg_handler for DSI v2, DSI 6G 1.x and DSI 6G v2.0+ controllers
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add dsi host helper function implementation for DSI v2
DSI 6G 1.x and DSI 6G v2.0+ controllers
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add dsi host helper functions support for DSI v2 and DSI 6G 1.x
controllers that are under version checks
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
f9cb8d8d83 fixed various race conditions with CTL flush, in particular
flushing and sending the START signal before encoder state was updated.
But it did this a little too well in some cases that don't trigger
encoder->enable(), and CTL[n].FLUSH would never be set. When page flips
happen it would paper over the bug, since the first plag flip would
flush out the state to the hardware.
The issue could be reproduced with, for example, modetest (without the
'-v' argument).
Fixes: f9cb8d8d83 drm/msm/mdp5: rework CTL START signal handling
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Experimentation shows that resuming power quickly after suspending
ends up forcing a system hang for unknown reasons on 5xx targets.
To avoid cycling the power too much (especially during init)
turn up the autosuspend time for a5xx to 250ms and use
pm_runtime_put_autosuspend() when applicable.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
When a msm8016 based system is woken up from suspend, the firmware in
the adreno device hangs.
[ 83.903416] qcom-iommu-ctx 1f09000.iommu-ctx: Unhandled context fault: fsr=0x202, iova=0x0000000000000000, fsynr=0x2, cb=1
[ 85.853633] msm 1a00000.mdss: A306: hangcheck detected gpu lockup rb 0!
[ 85.853661] msm 1a00000.mdss: A306: completed fence: 370
[ 85.859073] msm 1a00000.mdss: A306: submitted fence: 372
[ 85.865113] msm 1a00000.mdss: A306: hangcheck recover!
Fix this by adding pm_runtime_force_suspend/pm_runtime_force_resume
as sleep ops.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
To make suspend and resume work on msm8916 platforms, call into the generic
helpers and preserve the state across suspends.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
confusing as to which part of debug is informational, and which part causes behavioral change
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Aux engine is created from i2caux layer. We want to remove this layer
and use the engine directly.
[How]
Decouple aux engine from i2caux. Move aux engine related code to dce folder and use
dc resource pool to manage the engine. And use the engine functions directly
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Diags has POR to run the video workload using AYCRCB8888 through DCN;
capture it through DWB and send it to VCN hardware to encode
[how]
added the code to support this format so that DPP ICSC will be able to
convert it from YUV444 to internal RGB and DWB OCSC will be able to
convert from internal RGB to YUV420
Signed-off-by: vikrant mhaske <vikrant.mhaske@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When a dce100 asic was suspended, the clocks were not set to 0.
Upon resume, the new clock was compared to the existing clock,
they were found to be the same, and so the clock was not set.
This resulted in a pernicious blackscreen.
[How]
In atomic commit, check to see if there are any active pipes.
If no, set clocks to 0
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
diag specify what the full config and is only concerned about pass/fail at the end
having inter-op code like verifiying we can actually train at reported link rate
slows down diag test and add complexity we don't need
[how]
add dc_debug option to skip capability link trianing
also remove hbr in function name as verify is not specific to hbr
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Ken Chalmers <ken.chalmers@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The warning message floods the dmesg log on Tonga even
though it is expected to have a pix_clk set to zero,
when the pipe is not active.
[how]
remove the assert
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch moves amdgpu_fbdev_set_suspend() to the beginning
of suspend sequence.
This is to ensure fbcon does not to write to the VRAM
after GPU is powerd down.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The warning turned out to be not so useful, as BO destruction tends to
be deferred to a workqueue.
Also, we should be preventing any damage from this now, so not really
important anymore to fix code doing this.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise there may be potential SMU performance issues.
v2: fix commit description and coding style
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The argument was set wrongly. Fast/slow switch was asked when there is
actually a slow/fast switch needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Slow switch for UCLK when there is multiple displays and they are
not in sync.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were testing the register offset, instead of the value stored in the
register, therefore always timing out the loop.
This reduces suspend time of the system in the bug report below by ~600
ms.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/107277
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove local variable 'priv' to fix GCC warning:
drivers/gpu/drm/exynos/exynos_mixer.c: In function 'mixer_initialize':
drivers/gpu/drm/exynos/exynos_mixer.c:840:29: warning: variable 'priv' set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add calls to pm_runtime_force_{suspend,resume} as SYSTEM_SLEEP_PM_OPS for
all drivers for the real Exynos DRM hardware modules. This ensures that
the resources will be released for the system PM suspend/resume cycle.
Exynos DRM core already takes care of suspending the whole display pipeline
before PM callbacks of the real devices are called.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In the current code, exynos_drm_suspend() function is called after all
real devices (CRTCs, Encoders, etc) are suspended, because Exynos DRM
virtual platform device is created as last device in the system (as
a part of DRM registration). None of the devices for real hardware
modules has its own system suspend/resume callbacks, so it doesn't
change any order of the executed code, but it has a side-effect:
runtime PM callbacks for real devices are not executed, because those
devices are considered by PM core as already suspended. This might
cause issues on boards with complex pipelines, where something
depends on the runtime PM state of the given device.
To ensure that exynos_drm_suspend() is called before any suspend
callback from the real devices, assign it to .prepare callback. Same
for exynos_drm_resume(), using .complete callback ensures that all
real devices have been resumed when calling it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The virtual Exynos DRM device has no runtime PM enabled, so checking
for its runtime suspended state is useless.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use recently introduced common helpers to unify GEM handling code.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Replace all calls to exynos_drm_gem_get_{dma_addr,size}, by a simpler
function exynos_drm_gem_get(). This lets the caller to get access to
exynos_drm_gem object and extract any information about GEM object
without searching object tree for getting each parameter.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos G2D driver is the last client of the custom Exynos 'sub-driver'
framework. In the current state it doesn't really resolve any of the
issues it has been designed for, as Exynos DRM is already built only
as a single kernel module. Remove the custom 'sub-driver' framework and
simply use generic component framework also in G2D driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+7bq
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Fixups
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
Set possible_clones field to report that the writeback connector and
the one driving the display could be enabled at the same time.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Older version of this patch series reported writeback as disconnected
to avoid confusing userspace not aware of writeback connectors.
However, the version that got merged uses a special cap
(DRM_CLIENT_CAP_WRITEBACK_CONNECTORS) for this purpose.
This helps us avoid some special handling of writeback connector
in drm_helper_probe_single_connector_modes, see [1].
https://lists.freedesktop.org/archives/dri-devel/2018-July/183144.html
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Pull vfs fixes from Al Viro:
"Fix several places that screw up cleanups after failures halfway
through opening a file (one open-coding filp_clone_open() and getting
it wrong, two misusing alloc_file()). That part is -stable fodder from
the 'work.open' branch.
And Christoph's regression fix for uapi breakage in aio series;
include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel
definition of sigset_t, the reason for doing so in the first place had
been bogus - there's no need to expose struct __aio_sigset in
aio_abi.h at all"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: don't expose __aio_sigset in uapi
ocxlflash_getfile(): fix double-iput() on alloc_file() failures
cxl_getfile(): fix double-iput() on alloc_file() failures
drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()
Use the newly split ip suspend functions to do suspend displays
first (to deal with atomic so that FBs can be unpinned before
attempting to evict vram), then evict vram, then suspend the
other IPs. Also move the non-DC pinning code to only be
called in the non-DC cases since atomic should take care of
DC.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107065
Fixes: e00fb85 drm: Stop updating plane->crtc/fb/old_fb on atomic drivers
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to do some IPs earlier to deal with ordering issues
similar to how resume is split into two phases. Do DCE first
to deal with atomic, then do the rest.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the supported functions mask before calling the bios
requests method.
Reviewed-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
amdgpu_ttm_set_buffer_funcs_status destroys adev->mman.entity on suspend
without releasing adev->mman.bdev.man[TTM_PL_VRAM].move fence
so on resume the new drm_sched_entity.fence_context causes
the warning against the old fence context which is different.
Fix:
When destroying sched_entity in amdgpu_ttm_set_buffer_funcs_status
release man->move and set the pointer to NULL.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch removes the usage of console_(un)lock
by replacing drm_fb_helper_set_suspend() to
drm_fb_helper_set_suspend_unlocked() which locks and
unlocks the console instead of locking ourselves.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Except special naming as *_in_khz, The default clock unit in powerplay
is in 10KHz. so need to * 10 as expecting clock frequency in display
is in kHz.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
avoid the error in dmesg:
[drm:dm_pp_get_static_clocks]
*ERROR* DM_PPLIB: invalid powerlevel state: 0!
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can fix the issue resume from S3, the user's OD setting
were reverted to default.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the vddc limit before read them from vbios
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While the console_lock is held, console output will be buffered, till
its unlocked it wont be emitted, hence its ideal to unlock sooner to enable
debugging/detecting/fixing of any issue in the remaining sequence of events
in resume path.
The concern here is about consoles other than fbcon on the device,
e.g. a serial console
[How]
This patch restructures the console_lock, console_unlock around
amdgpu_fbdev_set_suspend() and moves this new block appropriately.
V2: Kept amdgpu_fbdev_set_suspend after pci_set_power_state
V3: Updated the commit message to clarify the real concern that this patch
addresses.
V4: code clean-up.
V5: fixed return value
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We were only setting this mask for DCN, but should really use it
universally for all ASICs.
[How]
Move the assignment out of the Raven switch statement for all ASICs
other than Stoney and Carrizo.
v2: Keep stutter always on for Carrizo and Stoney (Alex)
Cc: Rex.Zhu@amd.com
Cc: Feifei.Xu@amd.com
Cc: Kenneth.Feng@amd.com
Cc: Evan.Quan@amd.com
Cc: Bhawanpreet.Lakha@amd.com
Cc: Jordan.Lazare@amd.com
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are only ever called for non-DC code.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trivial fix to spelling mistake in dev_err error message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More features for 4.19:
- Map processes to vmids for debugging GPUVM faults
- Raven gfxoff fixes
- Initial gfxoff support for vega12
- Use defines for interrupt sources rather than magic numbers
- DC aux fixes
- Finish DC logging TODO
- Add more DC debugfs interfaces for conformance testing
- Add CRC support for DCN
- Scheduler rework in preparation for load balancing
- Unify common smu9 code
- Clean up UVD instancing support
- ttm cleanups
- Misc fixes and cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
-----BEGIN PGP SIGNATURE-----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=HyBh
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-07-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma
The whole handle, filp and entity handling is superfluous here.
We should have reviewed that more thoughtfully. It looks like somebody
just made the code instance aware without knowing the background.
v2: fix one more missed case in amdgpu_uvd_suspend
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not sure what that was every used for, but now it is completely unused.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'result' is not initialized correctly. It causes the API
return an error code even on success.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Use the newly added irq source defines rather than magic numbers
for smu7 thermal interrupts.
Rewiewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull the generic drm_audio_component support, which will be used later
for AMD/ATI and other HD-audio HDMI codec drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We broke the LVDS notifier resume thing in (presumably) commit
e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.") as
we no longer duplicate the current state in the LVDS notifier and
thus we never resume it properly either.
Instead of trying to fix it again let's just kill off the lid
notifier entirely. None of the machines tested thus far have
apparently needed it. Originally the lid notifier was added to
work around cases where the VBIOS was clobbering some of the
hardware state behind the driver's back, mostly on Thinkpads.
We now have a few report of Thinkpads working just fine without
the notifier. So maybe it was misdiagnosed originally, or
something else has changed (ACPI video stuff perhaps?).
If we do end up finding a machine where the VBIOS is still causing
problems I would suggest that we first try setting various bits in
the VBIOS scratch registers. There are several to choose from that
may instruct the VBIOS to steer clear.
With the notifier gone we'll also stop looking at the panel status
in ->detect().
v2: Nuke enum modeset_restore (Rodrigo)
Cc: stable@vger.kernel.org
Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de>
Cc: Vito Caputo <vcaputo@pengaru.com>
Cc: kitsunyan <kitsunyan@airmail.cc>
Cc: Joonas Saarinen <jza@saunalahti.fi>
Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s
Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200
Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902
References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html
References: https://bugs.freedesktop.org/show_bug.cgi?id=21230
Fixes: e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There's a race between idling the engine and finishing off the last
tasklet (as we may kick the tasklets after declaring an individual
engine idle). However, since we do not need to access the device until
we try to submit to the ELSP register (processing the CSB just requires
normal CPU access to the HWSP, and when idle we should not need to
submit!) we can defer the assertion unto that point. The assertion is
still useful as it does verify that we do hold the longterm GT wakeref
taken from request allocation until request completion.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107274
Fixes: 9512f985c3 ("drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719075029.28643-1-chris@chris-wilson.co.uk
If we call into the shrinker for direct relcaim inside kmalloc, it will
retire the requests. If we retire the vma->last_active while processing a
new i915_vma_move_to_active() we can upset the delicate bookkeeping
required for the cache. After the possible invocation of the shrinker, we
need to double check the vma->last_active is still valid.
Fixes: 8b293eb53a ("drm/i915: Track the last-active inside the i915_vma")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105600#c39
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719072206.16015-1-chris@chris-wilson.co.uk
We make a decision at module load whether to use the GuC backend or not,
but lose that setup across set-wedge. Currently, the guc doesn't
override the engine->set_default_submission hook letting execlists sneak
back in temporarily on unwedging leading to an unbalanced park/unpark.
v2: Remove comment about switching back temporarily to execlists on
guc_submission_disable(). We currently only call disable on shutdown,
and plan to also call disable before suspend and reset, in which case we
will either restore guc submission or mark the driver as wedged, making
the reset back to execlists pointless.
v3: Move reset.prepare across
Fixes: 63572937ce ("drm/i915/execlists: Flush pending preemption events during reset")
Testcase: igt/drv_module_reload/basic-reload-inject
Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717202932.1423-1-chris@chris-wilson.co.uk
Workaround for issues seen on systems with large amounts of RAM, caused
by display not supporting the same physical address limits as the other
parts of the GPU.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This was causing problems on a system with a large amount of RAM, where
display push buffers were being fetched incorrectly when placed in high
system memory addresses.
While this commit will resolve the issue on that particular system, the
issue will be avoided completely with another patch to more fully solve
problems with display and large amounts of system memory on Pascal.
It's still probably a good idea to disable this to prevent weird issues
in the future.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
RC model has these parameters that correspond with each of
15 ranges of RC buffer threshold value in the RC model.
The three elements are range_min_qp, range_max_qp and
range_bpg_offset.
Add the Rate Control range values for eDP/MIPI and DP case.
The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.
v2:
- Use _MMIO_PIPE() instead of _MMIO(_PICK()) (Manasi)
- Combine shifts (Manasi)
Cc: Jose Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-4-git-send-email-anusha.srivatsa@intel.com
Add register defines and shifts that control the RC buffer threshold
between encoder and decoder for eDP/MIPI and DP cases.
The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.
v2:
- Use _MMIO_PIPE() instead of _MMIO_(_PICK()) (Manasi)
- Combine shifts (Manasi)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-3-git-send-email-anusha.srivatsa@intel.com
Display Stream Compression(DSC) has a set of Picture
Parameter Set(PPS) components that the encoder must
communicate to the decoder.
This patch adds register definitions to
the PPS parameters for eDP/MIPI case and Display Port.
v2:
- Use _MMIO_PIPE instead of _MMIO(_PICK()). (Manasi)
- Use DSC constants as arguments. (Manasi)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-2-git-send-email-anusha.srivatsa@intel.com
The Picture Parameter Set metadata for DSC has to be sent
to the panel through secondary data packets. Add the error
correction registers, data registers and control registers
for the same.
The control registers for transcoders A and B are already
defined and will be reused for Icelake purpose. This patch adds
Control register for EDP and transcoder C apart from adding the
PPS data and error registers.
v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC.
The _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-1-git-send-email-anusha.srivatsa@intel.com
In the quest to remove all stack VLA usage from the kernel[1], this
uses the maximum sane buffer size and removes copy/paste code.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BO ptr already be initialized at definition, we needn't use the complicated
reference.
v2: fix typo at subject line
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pushing a job can change the ring assignment of an entity.
v2: squash in:
"drm/amdgpu: fix job priority handling" (Christian)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow to call amdgpu_ring_priority_get() after pushing the ring to the
scheduler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some UTCL registers' golden settings.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Tested-by: Kevin Wang <Kevin1.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was originally introduced following the VESA spec in order to validate PSR.
However we found so many issues around sink_crc that instead of helping PSR
development it only brought another layer of trouble to the table.
So, sink_crc has been a black whole for us in question of time, effort and hope.
First of the problems is that HW statement is clear: "Do not attempt to use
aux communication with PSR enabled". So the main reason behind sink_crc is
already compromised.
For a while we had hope on the aux-mutex could workaround this problem on SKL+
platforms, but that mutex was not reliable, not tested,
and we shouldn't use according to HW engineers.
Also, nor source, nor sink designed and implemented the sink_crc to be used like
we are trying to use here.
Well, the sink side of things is also apparently not prepared for this
case. Each panel that we tried seemed to have a different behavior with same
code and same source.
So, for all the time we lost on trying to ducktape all these different issues
I believe it is now time to move PSR to a more reliable validation.
Maybe not a perfect one as we dreamed for this sink_crc, but at least more
reliable.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705192528.30515-1-rodrigo.vivi@intel.com
power well support and begin of DSI support addition. Also there were many improvements
on execlists and interrupts for minimal latency on command submission; and many fixes
on selftests, mostly caught by our CI.
General driver:
- Clean-up on aux irq (Lucas)
- Mark expected switch fall-through for dealing with static analysis tools (Gustavo)
Gem:
- Different fixes for GuC (Chris, Anusha, Michal)
- Avoid self-relocation BIAS if no relocation (Chris)
- Improve debugging cases in on EINVAL return and vma allocation (Chris)
- Fixes and improvements on context destroying and freeing (Chris)
- Wait for engines to idle before retiring (Chris)
- Many improvements on execlists and interrupts for minimal latency on command submission (Chris)
- Many fixes in selftests, specially on cases highlighted on CI (Chris)
- Other fixes and improvements around GGTT (Chris)
- Prevent background reaping of active objects (Chris)
Display:
- Parallel modeset cleanup to fix driver reset (Chris)
- Get AUX power domain for DP main link (Imre)
- Clean-up on PSR unused func pointers (Rodrigo)
- Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun)
- Add a PSR1 live status (Vathsala)
- Replace old drm_*_{un/reference} with put,get functions (Thomas)
- FBC fixes (Maarten)
- Abstract and document the usage of picking macros (Jani)
- Remove unnecessary check for unsupported modifiers for NV12. (DK)
- Interrupt fixes for display (Ville)
- Clean up on sdvo code (Ville)
- Clean up on current DSI code (Jani)
- Remove support for legacy debugfs crc interface (Maarten)
- Simplify get_encoder_power_domains (Imre)
Icelake:
- MG PLL fixes (Imre)
- Add hw workaround for alpha blending (Vandita)
- Add power well support (Imre)
- Add Interrupt Support (Anusha)
- Start to add support for DSI on Ice Lake (Madhav)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbQ+ShAAoJEPpiX2QO6xPKas0H/igf9RFubtkMK7gHTef4FM+d
Bg+Qaq+O1vXlS/gidimL4NsVp1FxkejuCab0IffbTMvvjY0mv5NUA3kiIreAB0QZ
XO2hXr4fjjOINAQrdv5wiVMOqRjDws+fPgFFgZ8s5h1aJbofO27fjY/1MNtHwcA0
8VgtABpk+D3mkWvI8VTL0jCjYk2KocEvqUciz/Y7SQcPGV1iYFXqgBt5PR//rSvP
DU3u4R3KJGLDFbQwbe3uz2GxMfodAI6ijrqFeiizNSVqZORdTwnWlzKi6b6Cj9gl
SuleZacHPfv/+Ia7jmbmBqJEqi2GiAs948ne8QWL5/hsB9MMFO/UzwX/wYLNrP4=
=w6zC
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2018-07-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Higlights here goes to many PSR fixes and improvements; to the Ice lake work with
power well support and begin of DSI support addition. Also there were many improvements
on execlists and interrupts for minimal latency on command submission; and many fixes
on selftests, mostly caught by our CI.
General driver:
- Clean-up on aux irq (Lucas)
- Mark expected switch fall-through for dealing with static analysis tools (Gustavo)
Gem:
- Different fixes for GuC (Chris, Anusha, Michal)
- Avoid self-relocation BIAS if no relocation (Chris)
- Improve debugging cases in on EINVAL return and vma allocation (Chris)
- Fixes and improvements on context destroying and freeing (Chris)
- Wait for engines to idle before retiring (Chris)
- Many improvements on execlists and interrupts for minimal latency on command submission (Chris)
- Many fixes in selftests, specially on cases highlighted on CI (Chris)
- Other fixes and improvements around GGTT (Chris)
- Prevent background reaping of active objects (Chris)
Display:
- Parallel modeset cleanup to fix driver reset (Chris)
- Get AUX power domain for DP main link (Imre)
- Clean-up on PSR unused func pointers (Rodrigo)
- Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun)
- Add a PSR1 live status (Vathsala)
- Replace old drm_*_{un/reference} with put,get functions (Thomas)
- FBC fixes (Maarten)
- Abstract and document the usage of picking macros (Jani)
- Remove unnecessary check for unsupported modifiers for NV12. (DK)
- Interrupt fixes for display (Ville)
- Clean up on sdvo code (Ville)
- Clean up on current DSI code (Jani)
- Remove support for legacy debugfs crc interface (Maarten)
- Simplify get_encoder_power_domains (Imre)
Icelake:
- MG PLL fixes (Imre)
- Add hw workaround for alpha blending (Vandita)
- Add power well support (Imre)
- Add Interrupt Support (Anusha)
- Start to add support for DSI on Ice Lake (Madhav)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 10 Jul 2018 08:41:37 AM AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
Link: https://patchwork.freedesktop.org/patch/msgid/20180710234349.GA16562@intel.com
A lot of drivers duplicate the function to check if a format is yuv or not.
If we add a field (to denote whether the format is yuv or not) in the
drm_format_info table, all the drivers can use this field and it will
prevent duplication of similar logic.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-1-git-send-email-ayan.halder@arm.com
Creating two I2S instances for Stoney/cz platforms.
v2: squash in:
"drm/amdgpu/acp: Fix slab-out-of-bounds in mfd_add_device in acp_hw_init"
From Daniel Kurtz <djkurtz@chromium.org>.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the driver is wedged, we skip idling the GPU. However, we may still
have a few requests still not retired following the wedging (since they
will be waiting for a background worker trying to acquire struct_mutex).
As we hold the struct_mutex, always do a quick request retirement in
order to flush the wedged path.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107257
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717084121.28185-1-chris@chris-wilson.co.uk
This is the final step for more generic support of DRM audio
component. The generic audio component code is now moved to its own
file, and the symbols are renamed from snd_hac_i915_* to
snd_hdac_acomp_*, respectively. The generic code is enabled via the
new kconfig, CONFIG_SND_HDA_COMPONENT, while CONFIG_SND_HDA_I915 is
kept as the super-class.
Along with the split, three new callbacks are added to audio_ops:
pin2port is for providing the conversion between the pin number and
the widget id, and master_bind/master_unbin are called at binding /
unbinding the master component, respectively. All these are optional,
but used in i915 implementation and also other later implementations.
A note about the new snd_hdac_acomp_init() function: there is a slight
difference between this and the old snd_hdac_i915_init(). The latter
(still) synchronizes with the master component binding, i.e. it
assures that the relevant DRM component gets bound when it returns, or
gives a negative error. Meanwhile the new function doesn't
synchronize but just leaves as is. It's the responsibility by the
caller's side to synchronize, or the caller may accept the
asynchronous binding on the fly.
v1->v2: Fix missing NULL check in master_bind/unbind
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing other drivers to use the DRM audio component, rename the
i915_audio_component_* with drm_audio_component_*, and split the
generic part into drm_audio_component.h. The i915 specific stuff
remains in struct i915_audio_component, which contains
drm_audio_component as the base.
The license of drm_audio_component.h is kept to MIT as same as the the
original i915_component.h.
This is a preliminary change for further development, and no
functional changes by this patch itself, merely code-split and
renames.
v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915
argument in drm_audio_component.h
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[why] dp hbr2 eye diagram pattern for raven asic is not stabled.
workaround is to use tp4 pattern. But this should not be
applied to asic before raven.
[how] add new bool varilable in asic caps. for raven asic,
use the workaround. for carrizo, vega, do not use workaround.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 2c773de2 (drm/amdgpu: defer test IBs on the rings at boot (V3))
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can get that from the ring.
v2: squash in "drm/amdgpu: always initialize job->base.sched" (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add suffix ULL to constant 1000 in order to give the compiler complete
information about the proper arithmetic to use.
Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:
mode->clock * 1000
Addresses-Coverity-ID: 1466139 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704142255.GA8614@embeddedor.com
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717083657.16262-1-tzimmermann@suse.de
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717085428.18500-1-tzimmermann@suse.de
Our I915g (early gen3, the oldest machine we have in the farm) is still
reporting occasional incoherency performing the following operations:
1) write through GGTT (indirect write into memory)
2) write through either CPU or WC (direct write into memory)
3) read from GGTT (indirect read)
Instead of reporting the value from (2), the read from GGTT reports the
earlier value written via the GGTT. We have made sure that the writes are
flushed from the CPU (commit 3a32497f0d ("drm/i915/selftests: Provide
full mb() around clflush") and commit add00e6d89 ("drm/i915: Flush the
WCB following a WC write")), but still see the error, just less
frequently. The only remaining cache that might be affected here is a
chipset cache, so flush that as well.
Testcase: igt/drv_selftest/live_coherency #gdg
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717092655.28417-1-chris@chris-wilson.co.uk
Blending order is set based on the z position of each DRM plane. The
blending order register is currently cleared at each atomic DRM commit,
with the intent that each committed plane will set the appropriate
bits (based on its z-pos) when enabling the plane.
However, it sometimes happens that a particular plane is left unchanged
by an atomic commit and thus will not be configured again. In that
scenario, blending order is cleared and only the bits relevant for the
planes affected by the commit are set. This leaves the planes that did
not change without their blending order set in the register, leading
to that plane not being displayed.
Instead of clearing the blending order register at every atomic commit,
this change moves the register's initial clear at bind time and only
clears the bits for a specific plane when disabling it or changing its
zpos.
This way, planes that are left untouched by a DRM atomic commit are
no longer disabled.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717122522.11327-1-paul.kocialkowski@bootlin.com
This has been unused since commit 44b460cfe5 ("drm: imx: remove struct
imx_drm_crtc and imx_drm_crtc_helper_funcs")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717084814.18091-1-tzimmermann@suse.de
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In the huge pages tests, we may have lots of objects being trapped on
the freelist as we hold the struct_mutex allowing the free worker no
opportunity to recover the backing store. We also have stricter
requirements and the desire for large contiguous pages, further
increasing the allocation pressure. To reduce the chance of running out
of memory, we could either drop the mutex and flush the free worker, or
we could release the backing store directly. We do the latter in this
patch for simplicity.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107254
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717082334.18774-1-chris@chris-wilson.co.uk
On modern laptop, there are more and more platforms
have two GPUs, and each of them maybe have audio codec
for HDMP/DP output. For some dGPU which is no output,
audio codec usually is disabled.
In currect HDA audio driver, it will set all codec as
VGA_SWITCHEROO_DIS, the audio which is binded to UMA
will be suspended if user use debugfs to contorl power
In HDA driver side, it is difficult to know which GPU
the audio has binded to. So set the bound gpu pci dev
to vga_switcheroo.
if the audio client is not the third registration, audio
id will set in vga_switcheroo enable function. if the
audio client is the last registration when vga_switcheroo
_ready() get true, we should get audio client id from bound
GPU directly.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
User mode queue submissions don't go through KFD. Therefore we don't
know exactly when compute is idle or not idle. We use the existence
of user mode queues on a device as an approximation.
register_process is called when the first queue of a process is
created. Conversely unregister_process is called when the last queue
is destroyed. The first process that is registered takes compute
out of idle. The last process that is unregisters sets compute back
to idle.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This allows automatic switching to the compute power profile depending
on compute activity.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Make sure that we properly initialize at least the sched member.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can easily get that from the scheduler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We know the ring through the entity anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Can be obtained directly from the fence as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move job related defines, structure and function declarations to
amdgpu_job.h
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Any Linux kernel code should pass checkpatch.pl with no errors and
little, if any, warning.
[How]
Fixing some spacing errors and warnings.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Cursor boosting can only be done on DCN+
Check for nullptr since DCE doesn't implement it.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some DTN tests still failing @ 2% Need to reduce.
[how]
add instrumentation code to driver so we can get more information from failed runs.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We sometime require remapping of FB address space to UMA
[How]
Move address tracking up a layer before we apply address translation
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows DM to do any necessary updates before MST discovery starts.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Testing team wants a way to tell if HDR is on or not
[How]
Program the overscan color to visually indicate the HDR state of the top-most plane
Signed-off-by: Gloria Li <geling.li@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor boosting is done via CNVC_CUR register which is DPP, not HUBP
Previous commit was implementing it in HUBP functions,
and also breaking diags tests.
[How]
1. Undo original commit as well as Eric's diags test fix, almost completely
2. Move programming to DPP and call via new dc_stream function
3. Also removing cur_rom_en from dpp_cursor_attributes and programming
as part of normal cursor attributes as it depends on cursor color format
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hard-coded luts are needed since complex algorithms are used for
color and tone mapping. Add the headers for future use.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To check rq pointer before adding entity into it.
That avoids NULL pointer access in some case.
v2: move the check to caller
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change is to support MESA performace optimization.
Modify CS IOCTL to allow its input as command buffer and an array of
buffer handles to create a temporay bo list and then destroy it
when IOCTL completes.
This saves on calling for BO_LIST create and destry IOCTLs in MESA
and by this improves performance.
v2: Avoid inserting the temp list into idr struct.
v3:
Remove idr alloation from amdgpu_bo_list_create.
Remove useless argument from amdgpu_cs_parser_fini
Minor cosmetic stuff.
v4: Revert amdgpu_bo_list_destroy back to static
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b87079ec7b.
SMU FW team ask to remove this version specific code.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We must be able to reset the GPU while we are waiting on it to perform
an eviction (unbinding an active vma). So attach a spinning request to a
target vma and try and it evict it from a thread to see if that blocks
indefinitely.
v2: Add a wait for the thread to start just in case that takes more than
10ms...
v3: complete() not completion_done() to signal the completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716134009.13143-1-chris@chris-wilson.co.uk
return a uint32_t rather than an int to properly reflect
what the function does.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split out the shared smumgr code for vega10 and 12
so we don't have duplicate code for both.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commented out.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Inject a failure into preemption completion to pretend as if the HW
didn't successfully handle preemption and we are forced to do a reset in
the middle.
v2: Wait for preemption, to force testing with the missed preemption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716132154.12539-1-chris@chris-wilson.co.uk
On reset/wedging, we cancel all pending replies from the HW and we also
want to cancel an outstanding preemption event. Since we use the same
function to cancel the pending replies for reset and for a preemption
event, we can simply clear the active tracking for all.
v2: Keep execlists_user_end() markup for wedging
v3: Move assignment to inline to hide the bare assignment.
Fixes: 60a9432454 ("drm/i915/execlists: Drop clear_gtiir() on GPU reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716125424.5715-1-chris@chris-wilson.co.uk
This is something we've needed for a very long time now, as it makes
debugging issues with faulty MST hubs along with debugging issues
regarding us interfacing with hubs correctly vastly easier to debug.
Currently this can actually be done if you trace the i2c devices for DP
using ftrace but that's significantly less useful for a couple of
reasons:
- Tracing the i2c devices through ftrace means all of the traces are
going to contain a lot of "garbage" output that we're sending over the
i2c line. Most of this garbage comes from retrying transactions, DRM's
helper library adding extra transactions to work around bad hubs, etc.
- Having a user set up ftrace so that they can provide debugging
information is a lot more difficult then being able to say "just boot
with drm.debug=0x100"
- We can potentially expand upon this tracing in the future to print
debugging information in regards to other DP transactions like MST
sideband transactions
This is inspired by a patch Rob Clark sent to do this a long time back.
Neither of us could find the patch however, so we both assumed it would
probably just be easier to rewrite it anyway.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716154432.13433-1-lyude@redhat.com
During iteration process one of the proposed mechanism for not
breaking existing userspace was to report writeback connectors as
disconnected, however the final version used
DRM_CLIENT_CAP_WRITEBACK_CONNECTORS for that purpose.
Change-Id: I2319d099f7669094c8530f1521abdbca08e76486
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/238399/
The IPU also supports interlaced buffers that start with the bottom field.
To achieve this, the the base address EBA has to be increased by a stride
length and the interlace offset ILO has to be set to the negative stride.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
The CSI_SENS_CONF_DATA_FMT_RGB565 configuration only works for MIPI
CSI-2 sources. On the parallel bus, we need to use bayer (generic) mode
instead. To handle this difference, we pass the mbus_type to
mbus_code_to_bus_cfg().
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
[p.zabel@pengutronix.de - renamed rc to ret for consistency]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
mbus_code_to_bus_cfg() can fail on unknown mbus codes; pass back the
error to the caller.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
[p.zabel@pengutronix.de - renamed rc to ret for consistency]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The 24bit RGB format configuration is currently missing, we add
it now.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When the CSI is receiving from a bt.656 bus, include a check for
field type 'alternate' when determining whether to set CSI clock
mode to CCIR656_INTERLACED or CCIR656_PROGRESSIVE.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When the definition of this struct was removed a forward declaration and an
unused struct member were still left around. Remove them because they serve
no purpose.
Fixes 44b460cfe5 ("drm: imx: remove struct imx_drm_crtc and imx_drm_crtc_helper_funcs")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
If the second LVDS channel has been disabled in the DT when using dual-channel
mode we should not print a warning.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The LVDS signal integrity is only guaranteed when the correct enable
sequence (first IPU DI, then LDB) is used. If the LDB display output was
active before the imx-drm driver is loaded (like when a bootsplash was
active) the DI will be disabled by the full IPU reset we do when loading
the driver. The LDB control registers are not part of the IPU range and
thus will remain unchanged.
This leads to the LDB still being active when the DI is getting enabled,
effectively reversing the required enable sequence. Fix this by also
disabling the LDB on driver bind.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm_legacy_ctxbitmap_next() returns idr_alloc() which can return
-ENOMEM, -EINVAL or -ENOSPC none of which are -1 . but the call sites
of drm_legacy_ctxbitmap_next() seem to be assuming that the error case
would be -1 (original return of drm_ctxbitmap_next() prior to 2.6.23
was actually -1). Thus reenable error handling by checking for < 0.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 62968144e6 ("drm: convert drm context code to use Linux idr")
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1531571532-22733-1-git-send-email-hofrat@osadl.org
If we declare the driver wedged before the GPU truly is, then we may see
the GPU complete some CS events following our cancellation. This leaves
us quite confused as we deleted all the bookkeeping and thus complain
about the inconsistent state.
We can just ignore the remaining events and let the GPU idle by not
feeding it, and so avoid trying to racily overwrite shared state. We
rely on there being a full GPU reset before unwedging, giving us the
opportunity to reset the shared state.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-4-chris@chris-wilson.co.uk
On an aborted module load, we unwind and free our device private - but
we left a dangling pointer to our privates inside the pci_device. After
the attempted aborted unload, we may still get a call to i915_pci_remove()
when the module is removed, potentially chasing stale data.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-5-chris@chris-wilson.co.uk
Give in, since CI continues to incorrectly insist that KERN_NOTICE is a
warning and flags the timeout message as unwanted spam. At first, the
intention was to use the message to indicate which tests might warrant
an extended run, but virtually all tests require a timeout so it is
simply not as interesting as first thought.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103667
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-6-chris@chris-wilson.co.uk
Remove the modes timings tables for DMT modes and calculate the HW
paremeters from the modes timings.
Switch the DMT modes pixel clock calculation out of the static frequency
list to a generic calculation from a range of possible PLL dividers.
This patch is an intermediate step towards usage of the Common Clock
Framwework for PLL setup, by reworking the code to have common
sel_pll() function called by the CEA (HDMI) freq setup and the generic
DMT frequencies setup, we should be able to simply call clk_set_rate()
on the PLL clock handle in a near future.
The CEA (HDMI) and CVBS modes needs very specific clock paths that CCF will
never be able to determine by itself, so there is still some work to do for
a full handoff to CCF handling the clocks.
This setup permits setting non-CEA modes like :
- 1600x900-60Hz
- 1280x1024-75Hz
- 1280x1024-60Hz
- 1440x900-60Hz
- 1366x768-60Hz
- 1280x800-60Hz
- 1152x864-75Hz
- 1024x768-75Hz
- 1024x768-70Hz
- 1024x768-60Hz
- 832x624-75Hz
- 800x600-75Hz
- 800x600-72Hz
- 800x600-60Hz
- 640x480-75Hz
- 640x480-73Hz
- 640x480-67Hz
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: fixed trivial checkpatch issues]
Link: https://patchwork.freedesktop.org/patch/msgid/1531726814-14638-1-git-send-email-narmstrong@baylibre.com
Depending on the kernel configuration, early ARM architecture setup code
may have attached the GPU to a DMA/IOMMU mapping that transparently uses
the IOMMU to back the DMA API. Tegra requires special handling for IOMMU
backed buffers (a special bit in the GPU's MMU page tables indicates the
memory path to take: via the SMMU or directly to the memory controller).
Transparently backing DMA memory with an IOMMU prevents Nouveau from
properly handling such memory accesses and causes memory access faults.
As a side-note: buffers other than those allocated in instance memory
don't need to be physically contiguous from the GPU's perspective since
the GPU can map them into contiguous buffers using its own MMU. Mapping
these buffers through the IOMMU is unnecessary and will even lead to
performance degradation because of the additional translation. One
exception to this are compressible buffers which need large pages. In
order to enable these large pages, multiple small pages will have to be
combined into one large (I/O virtually contiguous) mapping via the
IOMMU. However, that is a topic outside the scope of this fix and isn't
currently supported. An implementation will want to explicitly create
these large pages in the Nouveau driver, so detaching from a DMA/IOMMU
mapping would still be required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In the quest to remove all stack VLA usage from the kernel[1], this
allocates the working buffers before starting the writing so it won't
abort in the middle. This needs an initial walk of the lists to figure
out how large the buffer should be.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Similar to commit 0bf8bf50ed ("module: Remove
const attribute from alias for MODULE_DEVICE_TABLE")
Fixes many -Wduplicate-decl-specifier warnings due to the combination of
const typeof() of already const variables.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Smatch complains that "value" can be uninitialized when kstrtol()
returns -ERANGE.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Noticed this as I was skimming through, if we fail to allocate memory
for cli we'll end up returning without dropping the runtime PM ref we
got. Additionally, we'll even return the wrong return code! (ret most
likely will == 0 here, we want -ENOMEM).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes various reclocking related issues on prime systems.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the entry size is too small, default to invalid values for both
boost_id and tdp_id, so as to default to the base clock in both cases.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
With instantaneous high precision vblank timestamping
that updates at leading edge of vblank, the emulated
"hw vblank counter" from vblank timestamping, which
increments at leading edge of vblank, and reliable
page flip execution and completion at leading edge of
vblank, we should meet the requirements for fast/
immediate vblank irq disable/enable.
This is only allowed on nv50+ gpu's, ie. the ones with
atomic modesetting. One requirement for immediate vblank
disable is that high precision vblank timestamping works
reliably all the time on all connectors. This is not the
case on all pre-nv50 parts for analog VGA outputs, where we
currently don't always have support for scanout position
queries and therefore fall back to vblank interrupt
timestamping. The implementation in nv04_head_state() does
not return valid values for vblanks, vtotal, hblanks, htotal
for VGA outputs on all cards, but those are needed for scanout
position queries.
Testing on Linux-4.12-rc5 + drm-next on a GeForce 9500 GT
(NV G96) with timing measurement equipment indicates this
works fine, so allow immediate vblank disable for power
saving.
For debugging in case of unexpected trouble, booting
with kernel cmdline option drm.vblankoffdelay=0
(or echo 0 > /sys/module/drm/parameters/vblankoffdelay)
would keep vblank irqs permanently on to approximate old
behavior.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference() and
drm_*_unreference() helpers.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Fixes: 30ed49b55b ("drm/nouveau/kms/nv50-: move code underneath dispnv50/")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Change values to u32, there's no need for them to be 64-bit.
Reported-by: Colin Ian King <colin.king@canonical.com>
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This allows to have the related MODULE_FIRMWARE tag only
on relevant arch (arm64).
This will saves about 400k on initramfs when not relevant
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently nouveau doesn't actually expose the state debugfs file that's
usually provided for any modesetting driver that supports atomic, even
if nouveau is loaded with atomic=1. This is due to the fact that the
standard debugfs files that DRM creates for atomic drivers is called
when drm_get_pci_dev() is called from nouveau_drm.c. This happens well
before we've initialized the display core, which is currently
responsible for setting the DRIVER_ATOMIC cap.
So, move the atomic option into nouveau_drm.c and just add the
DRIVER_ATOMIC cap whenever it's enabled on the kernel commandline. This
shouldn't cause any actual issues, as the atomic ioctl will still fail
as expected even if the display core doesn't disable it until later in
the init sequence. This also provides the added benefit of being able to
use the state debugfs file to check the current display state even if
clients aren't allowed to modify it through anything other than the
legacy ioctls.
Additionally, disable the DRIVER_ATOMIC cap in nv04's display core, as
this was already disabled there previously.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This both uses the legacy modesetting structures in a racy manner, and
additionally also doesn't even check the right variable (enabled != the
CRTC is actually turned on for atomic).
This fixes issues on my P50 regarding the dedicated GPU not entering
runtime suspend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A CRTC being enabled doesn't mean it's on! It doesn't even necessarily
mean it's being used. This fixes runtime PM leaks on the P50 I've got
next to me.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When MST and atomic were introduced to nouveau, another structure that
could contain a drm_connector embedded within it was introduced; struct
nv50_mstc. This meant that we no longer would be able to simply loop
through our connector list and assume that nouveau_connector() would
return a proper pointer for each connector, since the assertion that
all connectors coming from nouveau have a full nouveau_connector struct
became invalid.
Unfortunately, none of the actual code that looped through connectors
ever got updated, which means that we've been causing invalid memory
accesses for quite a while now.
An example that was caught by KASAN:
[ 201.038698] ==================================================================
[ 201.038792] BUG: KASAN: slab-out-of-bounds in nvif_notify_get+0x190/0x1a0 [nouveau]
[ 201.038797] Read of size 4 at addr ffff88076738c650 by task kworker/0:3/718
[ 201.038800]
[ 201.038822] CPU: 0 PID: 718 Comm: kworker/0:3 Tainted: G O 4.18.0-rc4Lyude-Test+ #1
[ 201.038825] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018
[ 201.038882] Workqueue: events nouveau_display_hpd_work [nouveau]
[ 201.038887] Call Trace:
[ 201.038894] dump_stack+0xa4/0xfd
[ 201.038900] print_address_description+0x71/0x239
[ 201.038929] ? nvif_notify_get+0x190/0x1a0 [nouveau]
[ 201.038935] kasan_report.cold.6+0x242/0x2fe
[ 201.038942] __asan_report_load4_noabort+0x19/0x20
[ 201.038970] nvif_notify_get+0x190/0x1a0 [nouveau]
[ 201.038998] ? nvif_notify_put+0x1f0/0x1f0 [nouveau]
[ 201.039003] ? kmsg_dump_rewind_nolock+0xe4/0xe4
[ 201.039049] nouveau_display_init.cold.12+0x34/0x39 [nouveau]
[ 201.039089] ? nouveau_user_framebuffer_create+0x120/0x120 [nouveau]
[ 201.039133] nouveau_display_resume+0x5c0/0x810 [nouveau]
[ 201.039173] ? nvkm_client_ioctl+0x20/0x20 [nouveau]
[ 201.039215] nouveau_do_resume+0x19f/0x570 [nouveau]
[ 201.039256] nouveau_pmops_runtime_resume+0xd8/0x2a0 [nouveau]
[ 201.039264] pci_pm_runtime_resume+0x130/0x250
[ 201.039269] ? pci_restore_standard_config+0x70/0x70
[ 201.039275] __rpm_callback+0x1f2/0x5d0
[ 201.039279] ? rpm_resume+0x560/0x18a0
[ 201.039283] ? pci_restore_standard_config+0x70/0x70
[ 201.039287] ? pci_restore_standard_config+0x70/0x70
[ 201.039291] ? pci_restore_standard_config+0x70/0x70
[ 201.039296] rpm_callback+0x175/0x210
[ 201.039300] ? pci_restore_standard_config+0x70/0x70
[ 201.039305] rpm_resume+0xcc3/0x18a0
[ 201.039312] ? rpm_callback+0x210/0x210
[ 201.039317] ? __pm_runtime_resume+0x9e/0x100
[ 201.039322] ? kasan_check_write+0x14/0x20
[ 201.039326] ? do_raw_spin_lock+0xc2/0x1c0
[ 201.039333] __pm_runtime_resume+0xac/0x100
[ 201.039374] nouveau_display_hpd_work+0x67/0x1f0 [nouveau]
[ 201.039380] process_one_work+0x7a0/0x14d0
[ 201.039388] ? cancel_delayed_work_sync+0x20/0x20
[ 201.039392] ? lock_acquire+0x113/0x310
[ 201.039398] ? kasan_check_write+0x14/0x20
[ 201.039402] ? do_raw_spin_lock+0xc2/0x1c0
[ 201.039409] worker_thread+0x86/0xb50
[ 201.039418] kthread+0x2e9/0x3a0
[ 201.039422] ? process_one_work+0x14d0/0x14d0
[ 201.039426] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 201.039431] ret_from_fork+0x3a/0x50
[ 201.039441]
[ 201.039444] Allocated by task 79:
[ 201.039449] save_stack+0x43/0xd0
[ 201.039452] kasan_kmalloc+0xc4/0xe0
[ 201.039456] kmem_cache_alloc_trace+0x10a/0x260
[ 201.039494] nv50_mstm_add_connector+0x9a/0x340 [nouveau]
[ 201.039504] drm_dp_add_port+0xff5/0x1fc0 [drm_kms_helper]
[ 201.039511] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[ 201.039518] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[ 201.039525] drm_dp_mst_link_probe_work+0x71/0xb0 [drm_kms_helper]
[ 201.039529] process_one_work+0x7a0/0x14d0
[ 201.039533] worker_thread+0x86/0xb50
[ 201.039537] kthread+0x2e9/0x3a0
[ 201.039541] ret_from_fork+0x3a/0x50
[ 201.039543]
[ 201.039546] Freed by task 0:
[ 201.039549] (stack is not available)
[ 201.039551]
[ 201.039555] The buggy address belongs to the object at ffff88076738c1a8
which belongs to the cache kmalloc-2048 of size 2048
[ 201.039559] The buggy address is located 1192 bytes inside of
2048-byte region [ffff88076738c1a8, ffff88076738c9a8)
[ 201.039563] The buggy address belongs to the page:
[ 201.039567] page:ffffea001d9ce200 count:1 mapcount:0 mapping:ffff88084000d0c0 index:0x0 compound_mapcount: 0
[ 201.039573] flags: 0x8000000000008100(slab|head)
[ 201.039578] raw: 8000000000008100 ffffea001da3be08 ffffea001da25a08 ffff88084000d0c0
[ 201.039582] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ 201.039585] page dumped because: kasan: bad access detected
[ 201.039588]
[ 201.039591] Memory state around the buggy address:
[ 201.039594] ffff88076738c500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 201.039598] ffff88076738c580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 201.039601] >ffff88076738c600: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
[ 201.039604] ^
[ 201.039607] ffff88076738c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 201.039611] ffff88076738c700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 201.039613] ==================================================================
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Every codepath in nouveau that loops through the connector list
currently does so using the old method, which is prone to race
conditions from MST connectors being created and destroyed. This has
been causing a multitude of problems, including memory corruption from
trying to access connectors that have already been freed!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The bo array has req->nr_buffers elements so the > should be >= so we
don't read beyond the end of the array.
Fixes: a1606a9596 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It was possible for this to be skipped when shutting down MST streams, and
leaving the core channel interlocked with a wndw channel update that never
happens - leading to a hung display.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-By: Lyude Paul <lyude@redhat.com>
- Fix hotplug irq ack on i965/g4x (Ville)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbSE5yAAoJEPpiX2QO6xPKI6kIALfg7r2e7nAv0wOmjfQSrE0o
8wNseKgizWzv4XF0MqYB6l1fFpQddhOLRhcgcPg9LwDhYvUjOs2PvMoRY1c5g9r6
0Luvcg/gzKG+BVhIIky5GnUpUaPHatAwgSKJ6sV8cwqkplt3eCd/pka+q0eGqOTa
t0ko7ZjRVWGdeVh8A59EzlBfEgxZkWw0B7pojMCFHQ6GlL10cCtwOnEyIv+JvzuS
l+pVsGVwcKh8v9Ngi5+MSGFPHieRFKdi+WbI3V+0Bm+VBT2LjZTG+ne9WBV75sKI
/KiMEi+1SdEIhjaJpJsSziqzN9zvyJAnsxBIkoiYW3Z7jdOav2rC1vZWt9kCdv0=
=+bAc
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-07-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
I already pulled the first fix, pull the GVT fixes.
- GVT fix for KBL vGPU hang to update virtual register from LRI.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713070922.GA19840@intel.com
- Single fix for a build error when the driver is builtin,
but the backend is a loadable module.
-----BEGIN PGP SIGNATURE-----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=It28
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v4.18-rc5:
- Single fix for a build error when the driver is builtin,
but the backend is a loadable module.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c596cf5-3f24-070e-74f2-c59bfbaf68fa@linux.intel.com
This contains a couple of one- or two-line fixes for various minor
issues in the Tegra driver.
-----BEGIN PGP SIGNATURE-----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=eBgW
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.18-rc5' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.18-rc5
This contains a couple of one- or two-line fixes for various minor
issues in the Tegra driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712070142.15571-1-thierry.reding@gmail.com
CU-masking allows a KFD client to control the set of CUs used by a
user mode queue for executing compute dispatches. This can be used
for optimizing the partitioning of the GPU and minimize conflicts
between concurrent tasks.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We're seeing "RPM wakelock ref not held during HW access" warning
otherwise. Since IRQs are synced for runtime suspend we can just disable
the wakeref asserts.
Reported-by: Marta Löfstedt <marta.lofstedt@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105710
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180714173703.7894-1-chris@chris-wilson.co.uk
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Inside intel_engine_is_idle(), we flush the tasklet to ensure that is
being run in a timely fashion (ksoftirqd has taught us to expect the
worst). However, if we are in the middle of reset, the HW may not yet be
ready to execute the submission tasklet and so we must respect the
disable flag.
Fixes: dd0cf235d8 ("drm/i915: Speed up idle detection by kicking the tasklets")
Testcase: igt/drv_selftest/live_hangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-2-chris@chris-wilson.co.uk
Add DID and kfd_device_info for Raven.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
memory_exception_data is already initialized for not-present faults.
It only needs to be overridden for permission faults.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven multiple PPRs can be queued up by the hardware. When the
first of those requests is handled by the IOMMU driver, the memory
access succeeds. After that the application may be done with the
memory and unmap it. At that point the page table entries are
invalidated, but there are still outstanding duplicate PPRs for those
addresses. When the IOMMU driver processes those duplicate requests,
it finds invalid page table entries and triggers an invalid PPR fault.
As a workaround, don't signal invalid PPR faults on Raven to avoid
segfaulting applications that haven't done anything wrong. As a side
effect, real GPU memory access faults may go unnoticed by the
application.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven Invalid PPRs (peripheral page requests) can be reported
because multiple PPRs can be still queued when memory is freed.
Apply a rate limit to avoid flooding the log in this case.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven there is only one SDMA engine instead of previously assumed two,
so we need to adapt our code to this new scenario.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If there are several memory banks that has the same properties in CRAT,
we aggregate them into one memory bank. This cleans up memory banks on
APUs (e.g. Raven) where the CRAT reports each memory channel as a
separate bank. This only confuses user mode, which only deals with
virtual memory.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Rather than calculating it everytime we rebuild the toc
buffer, calculate it once initially and then just copy
the cached results to the vram buffer.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use kaddr directly rather than secondary variable.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than using the index variable stored in vram. If
the device fails to come back online after a resume cycle,
reads from vram will return all 1s which will cause a
segfault. Based on a patch from Thomas Martitz <kugel@rockbox.org>.
This avoids the segfault, but we still need to sort out
why the GPU does not come back online after a resume.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105760
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the PP_STATE_SUPPORT_* rather than AMD_CG_SUPPORT_*
when communicating with the SMU.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently we do not turn off autocal when scaling is in bypass.
In case vbios enalbes auto scale and our first mode set is a non-scaled
mode we have autocal on causing screen corruption.
[how]
moves turning autocal off to be first thing done during scaler setup
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Prevent unexpected color shows if DalMpVisualConfirm enable.
[How] Zero out color configuration data for DalMpVisualConfirm when initiating.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DV updated their dml with an option to use max vstartup,
this updates dc dml with the same option
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The previous code could allow through attempts to enable more streams
than there are timing generators, in designs where the number of pipes
is greater than the number of timing generators.
[How]
Compare the new stream count to the resource pool's timing generator
count, instead of its pipe count. Also correct a typo in the error
message.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when hw team does phy parameters tuning, there is need to force dp
link rate or lane count grater than the values from dp receiver to
check dp tx. current debufs limit link rate, lane count no more
than rx caps.
[How] remove force settings less than rx caps check
v2: Fix typo in title
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Regamma/CTM tests require CRC support
[How]
The CRC registers that were used in DCE exist under different
names in DCN. The code was copied from DCE (in
dc/dce110/dce110_timing_generator.c) into DCN, and changed to
use the DCN register access helper functions.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
PNP cause bsod regression fix
[HOW]
Add NULL check
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Add a switch statement to translate pp's powerlevel enum
to dc powerlevel statement enum
[how]
Add a translator function
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
"DalEnableHDMI20" set to 0, disallow HDMI YCbCr420 and pixel clock > 340Mhz
Default is enabled.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
get_channel_status() can return 0 in returned_bytes, and report a
successful operation result. This is because it prunes the first status
byte out. This was preventing read_channel_reply() from being called
(due to the faulty condition), and consequently preventing the AUX
reply status from being set.
[How]
Fix the conditional so that it accounts for when get_channel_status()
returns 0 bytes read.
[Fixes]
Fixes possible edid read failures during S3 resume, where we are now
relying on DRM's DP AUX handling. This was an regression introduced by:
Author: Harry Wentland <harry.wentland@amd.com>
drm/amd/display: Return aux replies directly to DRM
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no point in keeping the AUX reply value in the raw format as
returned from reading the AUX_SW_DATA register.
[How]
Shift it within read_channel_reply(), where the register is read, before
returning it.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors mark 4K@60 capable HDMI port only have 300MHz TMDS
maximum, but the edid includes 4K@60 mode in cea extension block.
[How]
To enable 4K@60, need to limit BW by allowing YCbCr420 ONLY mode.
Add YCbCr420 only support for monitors that do not fully support
HDMI2.0, e.g., ASUS PA328. The YCbCr420 only support applies to
DCN, DCE112 or higher.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bug fix: phy test PLTAT is special 80bit test pattern. The 80bit
data should be hard coded within driver so that user does not
need input the deata. previous driver does not have hard coded
80 bits pattern data for PLTPAT. Other than this PLTPAT, user
has to input 80 bits pattern data. In case user input less than
10 bytes data, un-input data byte will be filled by 0x00.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Duke Du <Duke.Du@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC 4.9 reports a 'missing braces around initializer' error. This is a
bug, documented here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Fix it by adding another brace.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
function: get current DP PHY settings: voltage swing, pre-emphasis,
post-cursor2 (defined by VESA DP specification)
valid values: voltage swing: 0,1,2,3 pre-emphasis : 0,1,2,3
post cursor2 : 0,1,2,3
debugfs file phy_setings is located at /sys/kernel/debug/dri/0/DP-x
there will be directories, like DP-1, DP-2,DP-3, etc. for DP display
--- to figure out which DP-x is the display for DP to be check,
cd DP-x
ls -ll
There should be debugfs file, like link_settings, phy_settings.
cat link_settings
from lane_count, link_rate to figure which DP-x is for display to be
worked on
--- to get current DP PHY settings,
cat phy_settings
--- to change DP PHY settings,
echo <voltage_swing> <pre-emphasis> <post_cursor2> > phy_settings
for examle, to change voltage swing to 2, pre-emphasis to 3,
post_cursor2 to 0,
echo 2 3 0 > phy_settings
--- to check if change be applied, get current phy settings by
cat phy_settings
--- in case invalid values are set by user, like
echo 1 4 0 > phy_settings
HW will NOT be programmed by these settings.
cat phy_settings will show the previous valid settings.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In eDP spec, the min duration in LCDVDD on-off-on sequence should be
500ms, some BOE panels need 700ms to pass.
[HOW]
Add patch to wait more time when eDP power on.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set PHY layer or Link layer test pattern
PHY test pattern is used for PHY SI check.
Link layer test will not affect PHY SI.
- normal video mode
0 = DP_TEST_PATTERN_VIDEO_MODE
- PHY test pattern supported
1 = DP_TEST_PATTERN_D102
2 = DP_TEST_PATTERN_SYMBOL_ERROR
3 = DP_TEST_PATTERN_PRBS7
4 = DP_TEST_PATTERN_80BIT_CUSTOM
5 = DP_TEST_PATTERN_CP2520_1
6 = DP_TEST_PATTERN_CP2520_2 = DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE
7 = DP_TEST_PATTERN_CP2520_3
- DP PHY Link Training Patterns
8 = DP_TEST_PATTERN_TRAINING_PATTERN1
9 = DP_TEST_PATTERN_TRAINING_PATTERN2
0xa = DP_TEST_PATTERN_TRAINING_PATTERN3
0xb = DP_TEST_PATTERN_TRAINING_PATTERN4
- DP Link Layer Test pattern
0xc = DP_TEST_PATTERN_COLOR_SQUARES
0xd = DP_TEST_PATTERN_COLOR_SQUARES_CEA
0xe = DP_TEST_PATTERN_VERTICAL_BARS
0xf = DP_TEST_PATTERN_HORIZONTAL_BARS
0x10= DP_TEST_PATTERN_COLOR_RAMP
debugfs phy_test_pattern is located at /syskernel/debug/dri/0/DP-x
--- set test pattern
echo <test pattern #> > test_pattern
- custom test pattern
If test pattern # is not supported, NO HW programming will be done
for DP_TEST_PATTERN_80BIT_CUSTOM, it needs extra 10 bytes of data
for the user pattern. input 10 bytes data are separated by space
echo 0x4 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88 0x99 0xaa >
test_pattern
--- reset test pattern
echo 0 > test_pattern
--- HPD detection is disabled when set PHY test pattern
when PHY test pattern (pattern # within [1,7]) is set, HPD pin of
HW ASIC is disable. User could unplug DP display from DP connected
and plug scope to check test pattern PHY SI.
If there is need unplug scope and plug DP display back, do steps
below:
echo 0 > phy_test_pattern
unplug scope
plug DP display.
"echo 0 > phy_test_pattern" will re-enable HPD pin again so that
video sw driver could detect "unplug scope" and "plug DP display"
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
