The SED Opal response parsing function response_parse() does not
handle the case of an empty atom in the response. This causes
the entry count to be too high and the response fails to be
parsed. Recognizing, but ignoring, empty atoms allows response
handling to succeed.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
md_start_sync() will suspend the array if there are spares that can be
added or removed from conf, however, if reshape is still in progress,
this won't happen at all or data will be corrupted(remove_and_add_spares
won't be called from md_choose_sync_action for reshape), hence there is
no need to suspend the array if reshape is not done yet.
Meanwhile, there is a potential deadlock for raid456:
1) reshape is interrupted;
2) set one of the disk WantReplacement, and add a new disk to the array,
however, recovery won't start until the reshape is finished;
3) then issue an IO across reshpae position, this IO will wait for
reshape to make progress;
4) continue to reshape, then md_start_sync() found there is a spare disk
that can be added to conf, mddev_suspend() is called;
Step 4 and step 3 is waiting for each other, deadlock triggered. Noted
this problem is found by code review, and it's not reporduced yet.
Fix this porblem by don't suspend the array for interrupted reshape,
this is safe because conf won't be changed until reshape is done.
Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-6-yukuai1@huaweicloud.com
Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.
Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:
[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN
Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread.
Fixes: f67055780c ("[PATCH] md: Checkpoint and allow restart of raid5 reshape")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-5-yukuai1@huaweicloud.com
stop_sync_thread() will interrupt md_do_sync(), and md_do_sync() must
set MD_RECOVERY_DONE, so that follow up md_check_recovery() will
unregister sync_thread, clear MD_RECOVERY_RUNNING and wake up
stop_sync_thread().
If MD_RECOVERY_WAIT is set or the array is read-only, md_do_sync() will
return without setting MD_RECOVERY_DONE, and after commit f52f5c71f3
("md: fix stopping sync thread"), dm-raid switch from
md_reap_sync_thread() to stop_sync_thread() to unregister sync_thread
from md_stop() and md_stop_writes(), causing the test
shell/lvconvert-raid-reshape.sh hang.
We shouldn't switch back to md_reap_sync_thread() because it's
problematic in the first place. Fix the problem by making sure
md_do_sync() will set MD_RECOVERY_DONE.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/ece2b06f-d647-6613-a534-ff4c9bec1142@redhat.com/
Fixes: d5d885fd51 ("md: introduce new personality funciton start()")
Fixes: 5fd6c1dce0 ("[PATCH] md: allow checkpoint of recovery with version-1 superblock")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-4-yukuai1@huaweicloud.com
Usually if the array is not read-write, md_check_recovery() won't
register new sync_thread in the first place. And if the array is
read-write and sync_thread is registered, md_set_readonly() will
unregister sync_thread before setting the array read-only. md/raid
follow this behavior hence there is no problem.
After commit f52f5c71f3 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:
1) array is read-only. dm-raid update super block:
rs_update_sbs
ro = mddev->ro
mddev->ro = 0
-> set array read-write
md_update_sb
2) register new sync thread concurrently.
3) dm-raid set array back to read-only:
rs_update_sbs
mddev->ro = ro
4) stop the array:
raid_dtr
md_stop
stop_sync_thread
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread_directly(mddev->sync_thread);
wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
5) sync thread done:
md_do_sync
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
6) daemon thread can't unregister sync thread:
md_check_recovery
if (!md_is_rdwr(mddev) &&
!test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return;
-> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang;
The root cause is that dm-raid manipulate 'mddev->ro' by itself,
however, dm-raid really should stop sync thread before setting the
array read-only. Unfortunately, I need to read more code before I
can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix
the problem the easy way for now to prevent dm-raid regression.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/9801e40-8ac7-e225-6a71-309dcf9dc9aa@redhat.com/
Fixes: ecbfb9f118 ("dm raid: add raid level takeover support")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-3-yukuai1@huaweicloud.com
mddev_suspend() never stop sync_thread, hence it doesn't make sense to
ignore suspended array in md_check_recovery(), which might cause
sync_thread can't be unregistered.
After commit f52f5c71f3 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:
1) suspend the array:
raid_postsuspend
mddev_suspend
2) stop the array:
raid_dtr
md_stop
__md_stop_writes
stop_sync_thread
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread_directly(mddev->sync_thread);
wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
3) sync thread done:
md_do_sync
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
4) daemon thread can't unregister sync thread:
md_check_recovery
if (mddev->suspended)
return; -> return directly
md_read_sync_thread
clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang;
This problem is not just related to dm-raid, fix it by ignoring
suspended array in md_check_recovery(). And follow up patches will
improve dm-raid better to frozen sync thread during suspend.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/8fb335e-6d2c-dbb5-d7-ded8db5145a@redhat.com/
Fixes: 68866e425b ("MD: no sync IO while suspended")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-2-yukuai1@huaweicloud.com
Remove superfluous initialization of status variable in
nvmet_execute_admin_connect() and nvmet_execute_io_connect(), since it
will get overwritten by nvmet_copy_from_sgl().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
NVM Express TP4167 provides a way for controllers to report a relaxed
execution constraint. Specifically, it notifies of exclusivity for IO
vs. admin commands instead of grouping these together. If set, then we
don't need to freeze IO in order to execute that admin command. The
freezing distrupts IO processes, so it's nice to avoid that if the
controller tells us it's not necessary.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In nvmf_connect_io_queue(), if connect I/O command fails, we log the
error and continue for authentication. This overrides error captured
from __nvme_submit_sync_cmd(), causing wrong return value.
Add goto out_free_data after logging connect error to fix the issue.
Fixes: f50fff73d6 ("nvme: implement In-Band authentication")
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)
-----BEGIN PGP SIGNATURE-----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=uQIH
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme into block-6.8
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.8
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)"
* tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme:
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
nvme-host: fix the updating of the firmware version
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Reported-by: Breno Leitão <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5160a5a53c ("blk-iocost: implement delay adjustment hysteresis")
Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
submit_flushes
atomic_set(&mddev->flush_pending, 1);
rdev_for_each_rcu(rdev, mddev)
atomic_inc(&mddev->flush_pending);
bi->bi_end_io = md_end_flush
submit_bio(bi);
/* flush io is done first */
md_end_flush
if (atomic_dec_and_test(&mddev->flush_pending))
percpu_ref_put(&mddev->active_io)
-> active_io is not released
if (atomic_dec_and_test(&mddev->flush_pending))
-> missing release of active_io
For consequence, mddev_suspend() will wait for 'active_io' to be zero
forever.
Fix this problem by releasing 'active_io' in submit_flushes() if
'flush_pending' is decreased to zero.
Fixes: fa2bbff7b0 ("md: synchronize flush io with array reconfiguration")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Blazej Kucman <blazej.kucman@linux.intel.com>
Closes: https://lore.kernel.org/lkml/20240130172524.0000417b@linux.intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-7-yukuai1@huaweicloud.com
Currently kernel supports 8 byte and 16 byte protection information.
So, use ns->head->pi_size instead of sizeof(struct t10_pi_tuple).
Signed-off-by: Francis Pravin <francis.p@samsung.com>
Signed-off-by: Sathyavathi M <sathya.m@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The functions and the attribute listed in the comment doesn't exists in
the code, (ns->logging_enabled, nvme_passthru_err_log_enabled_store()
and nvme_passthru_err_log_enabled_show())
Update the comment with right function names and a comment
ns->head->passthru_err_log_enabled,
nvme_io_passthru_err_log_enabled_store() and
nvme_io_passthru_err_log_enabled_show().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The namespace does not have attributes, but the head does. Move the new
logging attribute to that structure instead of dereferencing the wrong
type.
And while we're here, fix the reverse-tree coding style.
Fixes: 9f079dda14 ("nvme: allow passthru cmd error logging")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Tested-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The detection of dirty-throttled tasks in blk-wbt has been subtly broken
since its beginning in 2016. Namely if we are doing cgroup writeback and
the throttled task is not in the root cgroup, balance_dirty_pages() will
set dirty_sleep for the non-root bdi_writeback structure. However
blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback
structure. Thus detection of recently throttled tasks is not working in
this case (we noticed this when we switched to cgroup v2 and suddently
writeback was slow).
Since blk-wbt has no easy way to get to proper bdi_writeback and
furthermore its intention has always been to work on the whole device
rather than on individual cgroups, just move the dirty_sleep timestamp
from bdi_writeback to backing_dev_info. That fixes the checking for
recently throttled task and saves memory for everybody as a bonus.
CC: stable@vger.kernel.org
Fixes: b57d74aff9 ("writeback: track if we're sleeping on progress in balance_dirty_pages()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz
[axboe: fixup indentation errors]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 82b74cac28 ("blk-ioprio: Convert from rqos policy to direct
call") pushed setting bio I/O priority down into blk_mq_submit_bio()
-- which is too low within block core's submit_bio() because it
skips setting I/O priority for block drivers that implement
fops->submit_bio() (e.g. DM, MD, etc).
Fix this by moving bio_set_ioprio() up from blk-mq.c to blk-core.c and
call it from submit_bio(). This ensures all block drivers call
bio_set_ioprio() during initial bio submission.
Fixes: a78418e6a0 ("block: Always initialize bio IO priority on submit")
Co-developed-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
[snitzer: revised commit header]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240130202638.62600-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original code didn't update the firmware version if the
"next slot" of the AFI register isn't zero or if the
"current slot" field is zero; in those cases it assumed
that a reset was needed.
However, the NVMe specification doesn't exclude the possibility that
the "next slot" value is equal to the "current slot" value,
meaning that the same firmware slot will be activated after performing
a controller level reset; in this case a reset is clearly not
necessary and we can safely update the firmware version.
Modify the code so the kernel will report that a Controller Level Reset
is needed only in the following cases:
1) If the "current slot" field is zero. This is invalid and means that
something is wrong, a reset is needed.
or
2) if the "next slot" field isn't zero AND it's not equal to the
"current slot" value. This means that at the next reset a different
firmware slot will be activated.
Fixes: 983a338b96 ("nvme: update firmware version after commit")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
- Remove duplicated enums (Guixen)
- Use appropriate controller state accessors (Keith)
- Retryable authentication (Hannes)
- Add missing module descriptions (Chaitanya)
- Fibre-channel fixes for blktests (Daniel)
- Various type correctness updates (Caleb)
- Improve fabrics connection debugging prints (Nitin)
- Passthrough command verbose error logging (Adam)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmW7veAACgkQPe3zGtjz
RgmYnA//XhyNDaHEYaAHX+GUprm7TleQZP4CivaRpBJSzLZijrMFIySgopJhp/a1
H0Mcy4iPzvxrrL8ZW9rSALe8DlG/uSz3X86hD4zN78vIYIQ9HiUiGWV5OcrwTtZ+
DrLK88dYJM2WONSZR+xEz60aRmTgWB9jRVNBOKV1lrY5om26oKitq+0Xpj1Ctkcg
t8Ehjgkq04Y/0vau1eDeDuh+rcHIJqAyWFlQ9clQgPkNlI1Cxudm1nqveW7No0/l
rjYVssu3TxeOUhU5cLBBK905c+lldDQtZ6No4YmjJlZJ0kn4ctbbNf3P3bOz4zyS
/v5nLe24e3Qxf4BY6A4b6wtqH0BI4vYndxNzwN7/rkk1f9IJhoRfTx/9O7XbuX7L
slz13tyG8enDsIeZtC46k675/KCSLjfpfPwBQeBOyff/07BfB+1k+qsCgUrRkmDY
VWNKOETZ/eIgIEBqdr0yucR3LSjmSnUgRm24mit8hLlYpqZJgkHqKohSvFCSzcIg
zHRpfuwHX4AW5y11aRYWJPAGs7Xi13vz/gi1ertxk6D1qUxFP3NcqlCXPDmMbZFU
c4B9uKKMS593LDEGQa0GmJFiygwgva2l0HFy/Qrp+KUwiKtPbgNomc9onK1Z1odz
RenaIg2qSkOWBbYgvn5NiAaCMId+yMmHYgxLoAp3BeEU32PFP1c=
=oyuw
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.8-2024-02-01' of git://git.infradead.org/nvme into block-6.8
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.8
- Remove duplicated enums (Guixen)
- Use appropriate controller state accessors (Keith)
- Retryable authentication (Hannes)
- Add missing module descriptions (Chaitanya)
- Fibre-channel fixes for blktests (Daniel)
- Various type correctness updates (Caleb)
- Improve fabrics connection debugging prints (Nitin)
- Passthrough command verbose error logging (Adam)"
* tag 'nvme-6.8-2024-02-01' of git://git.infradead.org/nvme: (31 commits)
nvme: allow passthru cmd error logging
nvme-fc: show hostnqn when connecting to fc target
nvme-rdma: show hostnqn when connecting to rdma target
nvme-tcp: show hostnqn when connecting to tcp target
nvmet-fc: use RCU list iterator for assoc_list
nvmet-fc: take ref count on tgtport before delete assoc
nvmet-fc: avoid deadlock on delete association path
nvmet-fc: abort command when there is no binding
nvmet-fc: do not tack refs on tgtports from assoc
nvmet-fc: remove null hostport pointer check
nvmet-fc: hold reference on hostport match
nvmet-fc: free queue and assoc directly
nvmet-fc: defer cleanup using RCU properly
nvmet-fc: release reference on target port
nvmet-fcloop: swap the list_add_tail arguments
nvme-fc: do not wait in vain when unloading module
nvme-fc: log human-readable opcode on timeout
nvme: split out fabrics version of nvme_opcode_str()
nvme: take const cmd pointer in read-only helpers
nvme: remove redundant status mask
...
Commit d7ac8dca93 ("nvme: quiet user passthrough command errors")
disabled error logging for user passthrough commands. This commit
adds the ability to opt-in to passthrough admin error logging. IO
commands initiated as passthrough will always be logged.
The logging output for passthrough commands (Admin and IO) has been
changed to include CDWXX fields.
nvme0n1: Read(0x2), LBA Out of Range (sct 0x0 / sc 0x80) DNR cdw10=0x0 cdw11=0x1
cdw12=0x70000 cdw13=0x0 cdw14=0x0 cdw15=0x0
Add a helper function nvme_log_err_passthru() which allows us to log
error for passthru commands by decoding cdw10-cdw15 values of nvme
command.
Add a new sysfs attr passthru_err_log_enabled that allows user to conditionally
enable passthrough command logging for either passthrough Admin commands sent to
the controller or passthrough IO commands sent to a namespace.
By default, passthrough error logging is disabled.
To enable passthrough admin error logging:
echo 1 > /sys/class/nvme/nvme0/passthru_err_log_enabled
To disable passthrough admin error logging:
echo 0 > /sys/class/nvme/nvme0/passthru_err_log_enabled
To enable passthrough io error logging:
echo 1 > /sys/class/nvme/nvme0/nvme0n1/passthru_err_log_enabled
To disable passthrough io error logging:
echo 0 > /sys/class/nvme/nvme0/nvme0n1/passthru_err_log_enabled
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The assoc_list is a RCU protected list, thus use the RCU flavor of list
functions.
Let's use this opportunity and refactor this code and move the lookup
into a helper and give it a descriptive name.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We have to ensure that the tgtport is not going away
before be have remove all the associations.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When deleting an association the shutdown path is deadlocking because we
try to flush the nvmet_wq nested. Avoid this by deadlock by deferring
the put work into its own work item.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the target port has not active port binding, there is no point in
trying to process the command as it has to fail anyway. Instead adding
checks to all commands abort the command early.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The association life time is tied to the life time of the target port.
That means we should not take extra a refcount when creating a
association.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
An association has always a valid hostport pointer. Remove useless
null pointer check.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The hostport data structure is shared between the association, this why
we keep track of the users via a refcount. So we should not decrement
the refcount on a match and free the hostport several times.
Reported by KASAN.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Neither struct nvmet_fc_tgt_queue nor struct nvmet_fc_tgt_assoc are data
structure which are used in a RCU context. So there is no reason to
delay the free operation.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the target executes a disconnect and the host triggers a reconnect
immediately, the reconnect command still finds an existing association.
The reconnect crashes later on because nvmet_fc_delete_target_assoc
blindly removes resources while the reconnect code wants to use it.
To address this, nvmet_fc_find_target_assoc should not be able to
lookup an association which is being removed. The association list
is already under RCU lifetime management, so let's properly use it
and remove the association from the list and wait for a grace period
before cleaning up all. This means we also can drop the RCU management
on the queues, because this is now handled via the association itself.
A second step split the execution context so that the initial disconnect
command can complete without running the reconnect code in the same
context. As usual, this is done by deferring the ->done to a workqueue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In case we return early out of __nvmet_fc_finish_ls_req() we still have
to release the reference on the target port.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The first argument of list_add_tail function is the new element which
should be added to the list which is the second argument. Swap the
arguments to allow processing more than one element at a time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.
There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.
If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.
While at it, remove the unused nvme_fc_wq workqueue too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The fc transport logs the opcode and fctype on command timeout.
This is sufficient information to identify the command issued,
but not very human-readable. Use the nvme_fabrics_opcode_str()
helper to also log the name of the command, as rdma and tcp already do.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_opcode_str() currently supports admin, IO, and fabrics commands.
However, fabrics commands aren't allowed for the pci transport.
Currently the pci caller passes 0 as the fctype,
which means any fabrics command would be displayed as "Property Set".
Move fabrics command support into a function nvme_fabrics_opcode_str()
and remove the fctype argument to nvme_opcode_str().
This way, a fabrics command will display as "Unknown" for pci.
Convert the rdma and tcp transports to use nvme_fabrics_opcode_str().
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_is_fabrics() and nvme_is_write() only read struct nvme_command,
so take it by const pointer. This allows callers to pass a const pointer
and communicates that these functions don't modify the command.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In nvme_get_error_status_str(), the status code is already masked
with 0x7ff at the beginning of the function.
Don't bother masking it again when indexing nvme_statuses.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The functions in drivers/nvme/host/constants.c returning human-readable
status and opcode strings currently use type "const unsigned char *".
Typically string constants use type "const char *",
so remove "unsigned" from the return types.
This is a purely cosmetic change to clarify that the functions
return text strings instead of an array of bytes, for example.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add MODULE_DESCRIPTION() in order to remove warnings & get clean build:-
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/common/nvme-auth.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/common/nvme-keyring.o
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Authentication commands might trigger a lengthy computation on the
controller or even a callout to an external entity.
In these cases the controller might return a status without the DNR
bit set, indicating that the command should be retried.
This patch enables retries for authentication commands by setting
NVME_SUBMIT_RETRY for __nvme_submit_sync_cmd().
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Combine the two arguments 'flags' and 'at_head' from __nvme_submit_sync_cmd()
into a single 'flags' argument and use function-specific values to indicate
what should be set within the function.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
No point in having macros just for a single function nvme_auth_submit().
Open-code them into the caller.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The ctrl->state value is updated in another thread using WRITE_ONCE, so
ensure all the readers use the appropriate accessor.
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The nvmet_tcp_queue_ida should be destroy when the nvmet-tcp module
exit.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Greg Joyce