This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
-----BEGIN PGP SIGNATURE-----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=88qN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dS58
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.15
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
* tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: smsm: Fix missed interrupts if state changes while masked
soc: qcom: smsm: Implement support for get_irqchip_state
soc: qcom: mdt_loader: be more informative on errors
dt-bindings: qcom: geni-se: document iommus
soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: geni: Add support for gpi dma
soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()
drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains
dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding
dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: aoss: Fix the out of bound usage of cooling_devs
firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module
soc: qcom: socinfo: Don't print anything if nothing found
soc: qcom: rpmhpd: Use corner in power_off
soc: qcom: aoss: Add generic compatible
dt-bindings: soc: qcom: aoss: Convert to YAML
dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
firmware: qcom_scm: remove a duplicative condition
firmware: qcom_scm: Mark string array const
Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allocating and enabling a flush queue is in fact something we can
reasonably do while a DMA domain is active, without having to rebuild it
from scratch. Thus we can allow a strict -> non-strict transition from
sysfs without requiring to unbind the device's driver, which is of
particular interest to users who want to make selective relaxations to
critical devices like the one serving their root filesystem.
Disabling and draining a queue also seems technically possible to
achieve without rebuilding the whole domain, but would certainly be more
involved. Furthermore there's not such a clear use-case for tightening
up security *after* the device may already have done whatever it is that
you don't trust it not to do, so we only consider the relaxation case.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/d652966348c78457c38bf18daf369272a4ebc2c9.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To parallel the sysfs behaviour, merge the new build-time option
for DMA domain strictness into the default domain type choice.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/d04af35b9c0f2a1d39605d7a9b451f5e1f0c7736.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When passthrough is enabled, the default strictness policy becomes
irrelevant, since any subsequent runtime override to a DMA domain type
now embodies an explicit choice of strictness as well. Save on noise by
only logging the default policy when it is meaningfully in effect.
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9d2bcba880c6d517d0751ed8bd4960853030b4d7.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The sysfs interface for default domain types exists primarily so users
can choose the performance/security tradeoff relevant to their own
workload. As such, the choice between the policies for DMA domains fits
perfectly as an additional point on that scale - downgrading a
particular device from a strict default to non-strict may be enough to
let it reach the desired level of performance, while still retaining
more peace of mind than with a wide-open identity domain. Now that we've
abstracted non-strict mode as a distinct type of DMA domain, allow it to
be chosen through the user interface as well.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0e08da5ed4069fd3473cfbadda758ca983becdbf.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Eliminate the iommu_get_dma_strict() indirection and pipe the
information through the domain type from the beginning. Besides
the flow simplification this also has several nice side-effects:
- Automatically implies strict mode for untrusted devices by
virtue of their IOMMU_DOMAIN_DMA override.
- Ensures that we only end up using flush queues for drivers
which are aware of them and can actually benefit.
- Allows us to handle flush queue init failure by falling back
to strict mode instead of leaving it to possibly blow up later.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/47083d69155577f1367877b1594921948c366eb3.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In preparation for the strict vs. non-strict decision for DMA domains
to be expressed in the domain type, make sure we expose our flush queue
awareness by accepting the new domain type, and test the specific
feature flag where we want to identify DMA domains in general. The DMA
ops reset/setup can simply be made unconditional, since iommu-dma
already knows only to touch DMA domains.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/31a8ef868d593a2f3826a6a120edee81815375a7.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Promote the difference between strict and non-strict DMA domains from an
internal detail to a distinct domain feature and type, to pave the road
for exposing it through the sysfs default domain interface.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/08cd2afaf6b63c58ad49acec3517c9b32c2bb946.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IO_PGTABLE_QUIRK_NON_STRICT was never a very comfortable fit, since it's
not a quirk of the pagetable format itself. Now that we have a more
appropriate way to convey non-strict unmaps, though, this last of the
non-quirk quirks can also go, and with the flush queue code also now
enforcing its own ordering we can have a lovely cleanup all round.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/155b5c621cd8936472e273a8b07a182f62c6c20d.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since iommu_iotlb_gather exists to help drivers optimise flushing for a
given unmap request, it is also the logical place to indicate whether
the unmap is strict or not, and thus help them further optimise for
whether to expect a sync or a flush_all subsequently. As part of that,
it also seems fair to make the flush queue code take responsibility for
enforcing the really subtle ordering requirement it brings, so that we
don't need to worry about forgetting that if new drivers want to add
flush queue support, and can consolidate the existing versions.
While we're adding to the kerneldoc, also fill in some info for
@freelist which was overlooked previously.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/bf5f8e2ad84e48c712ccbf80fa8c610594c7595f.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_dma_init_domain() is now only called from iommu_setup_dma_ops(),
which has already assumed dev to be non-NULL.
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/06024523c080364390016550065e3cfe8031367e.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that everyone has converged on iommu-dma for IOMMU_DOMAIN_DMA
support, we can abandon the notion of drivers being responsible for the
cookie type, and consolidate all the management into the core code.
CC: Yong Wu <yong.wu@mediatek.com>
CC: Chunyan Zhang <chunyan.zhang@unisoc.com>
CC: Maxime Ripard <mripard@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/46a2c0e7419c7d1d931762dc7b6a69fa082d199a.1628682048.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This fixes improper iotlb invalidation in intel_pasid_tear_down_entry().
When a PASID was used as nested mode, released and reused, the following
error message will appear:
[ 180.187556] Unexpected page request in Privilege Mode
[ 180.187565] Unexpected page request in Privilege Mode
[ 180.279933] Unexpected page request in Privilege Mode
[ 180.279937] Unexpected page request in Privilege Mode
Per chapter 6.5.3.3 of VT-d spec 3.3, when tear down a pasid entry, the
software should use Domain selective IOTLB flush if the PGTT of the pasid
entry is SL only or Nested, while for the pasid entries whose PGTT is FL
only or PT using PASID-based IOTLB flush is enough.
Fixes: 2cd1311a26 ("iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr")
Signed-off-by: Kumar Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Tested-by: Yi Sun <yi.y.sun@intel.com>
Link: https://lore.kernel.org/r/20210817042425.1784279-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210817124321.1517985-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A PASID reference is increased whenever a device is bound to an mm (and
its PASID) successfully (i.e. the device's sdev user count is increased).
But the reference is not dropped every time the device is unbound
successfully from the mm (i.e. the device's sdev user count is decreased).
The reference is dropped only once by calling intel_svm_free_pasid() when
there isn't any device bound to the mm. intel_svm_free_pasid() drops the
reference and only frees the PASID on zero reference.
Fix the issue by dropping the PASID reference and freeing the PASID when
no reference on successful unbinding the device by calling
intel_svm_free_pasid() .
Fixes: 4048377414 ("iommu/vt-d: Use iommu_sva_alloc(free)_pasid() helpers")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20210813181345.1870742-1-fenghua.yu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210817124321.1517985-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pre-zeroing the batched commands structure is inefficient, as individual
commands are zeroed later in arm_smmu_cmdq_build_cmd(). The size is quite
large and commonly most commands won't even be used:
struct arm_smmu_cmdq_batch cmds = {};
345c: 52800001 mov w1, #0x0 // #0
3460: d2808102 mov x2, #0x408 // #1032
3464: 910143a0 add x0, x29, #0x50
3468: 94000000 bl 0 <memset>
Stop pre-zeroing the complete structure and only zero the num member.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1628696966-88386-1-git-send-email-john.garry@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When SMMU_GERROR.CMDQP_ERR is different to SMMU_GERRORN.CMDQP_ERR, it
indicates that one or more errors have been encountered on a command queue
control page interface. We need to traverse all ECMDQs in that control
page to find all errors. For each ECMDQ error handling, it is much the
same as the CMDQ error handling. This common processing part is extracted
as a new function __arm_smmu_cmdq_skip_err().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210811114852.2429-5-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
One SMMU has only one normal CMDQ. Therefore, this CMDQ is used regardless
of the core on which the command is inserted. It can be referenced
directly through "smmu->cmdq". However, one SMMU has multiple ECMDQs, and
the ECMDQ used by the core on which the command insertion is executed may
be different. So the helper function arm_smmu_get_cmdq() is added, which
returns the CMDQ/ECMDQ that the current core should use. Currently, the
code that supports ECMDQ is not added. just simply returns "&smmu->cmdq".
Many subfunctions of arm_smmu_cmdq_issue_cmdlist() use "&smmu->cmdq" or
"&smmu->cmdq.q" directly. To support ECMDQ, they need to call the newly
added function arm_smmu_get_cmdq() instead.
Note that normal CMDQ is still required until ECMDQ is available.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210811114852.2429-4-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The obvious key to the performance optimization of commit 587e6c10a7
("iommu/arm-smmu-v3: Reduce contention during command-queue insertion") is
to allow multiple cores to insert commands in parallel after a brief mutex
contention.
Obviously, inserting as many commands at a time as possible can reduce the
number of times the mutex contention participates, thereby improving the
overall performance. At least it reduces the number of calls to function
arm_smmu_cmdq_issue_cmdlist().
Therefore, function arm_smmu_cmdq_issue_cmd_with_sync() is added to insert
the 'cmd+sync' commands at a time.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210811114852.2429-3-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The obvious key to the performance optimization of commit 587e6c10a7
("iommu/arm-smmu-v3: Reduce contention during command-queue insertion") is
to allow multiple cores to insert commands in parallel after a brief mutex
contention.
Obviously, inserting as many commands at a time as possible can reduce the
number of times the mutex contention participates, thereby improving the
overall performance. At least it reduces the number of calls to function
arm_smmu_cmdq_issue_cmdlist().
Therefore, use command queue batching helpers to insert multiple commands
at a time.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210811114852.2429-2-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently for iommu_unmap() of large scatter-gather list with page size
elements, the majority of time is spent in flushing of partial walks in
__arm_lpae_unmap() which is a VA based TLB invalidation invalidating
page-by-page on iommus like arm-smmu-v2 (TLBIVA).
For example: to unmap a 32MB scatter-gather list with page size elements
(8192 entries), there are 16->2MB buffer unmaps based on the pgsize (2MB
for 4K granule) and each of 2MB will further result in 512 TLBIVAs (2MB/4K)
resulting in a total of 8192 TLBIVAs (512*16) for 16->2MB causing a huge
overhead.
On qcom implementation, there are several performance improvements for
TLB cache invalidations in HW like wait-for-safe (for realtime clients
such as camera and display) and few others to allow for cache
lookups/updates when TLBI is in progress for the same context bank.
So the cost of over-invalidation is less compared to the unmap latency
on several usecases like camera which deals with large buffers. So,
ASID based TLB invalidations (TLBIASID) can be used to invalidate the
entire context for partial walk flush thereby improving the unmap
latency.
For this example of 32MB scatter-gather list unmap, this change results
in just 16 ASID based TLB invalidations (TLBIASIDs) as opposed to 8192
TLBIVAs thereby increasing the performance of unmaps drastically.
Test on QTI SM8150 SoC for 10 iterations of iommu_{map_sg}/unmap:
(average over 10 iterations)
Before this optimization:
size iommu_map_sg iommu_unmap
4K 2.067 us 1.854 us
64K 9.598 us 8.802 us
1M 148.890 us 130.718 us
2M 305.864 us 67.291 us
12M 1793.604 us 390.838 us
16M 2386.848 us 518.187 us
24M 3563.296 us 775.989 us
32M 4747.171 us 1033.364 us
After this optimization:
size iommu_map_sg iommu_unmap
4K 1.723 us 1.765 us
64K 9.880 us 8.869 us
1M 155.364 us 135.223 us
2M 303.906 us 5.385 us
12M 1786.557 us 21.250 us
16M 2391.890 us 27.437 us
24M 3570.895 us 39.937 us
32M 4755.234 us 51.797 us
Real world data also shows big difference in unmap performance as below:
There were reports of camera frame drops because of high overhead in
iommu unmap without this optimization because of frequent unmaps issued
by camera of about 100MB/s taking more than 100ms thereby causing frame
drops.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20210811160426.10312-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
The Apple DART (Device Address Resolution Table) IOMMU is only present
on Apple ARM SoCs like the M1. Hence add a dependency on ARCH_APPLE, to
prevent asking the user about this driver when configuring a kernel
without support for the Apple Silicon SoC family.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/44fcf525273b32c9afcd7e99acbd346d47f0e047.1628603162.git.geert+renesas@glider.be
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Apple's new SoCs use iommus for almost all peripherals. These Device
Address Resolution Tables must be setup before these peripherals can
act as DMA masters.
Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210803121651.61594-4-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Apple's DART iommu uses a pagetable format that shares some
similarities with the ones already implemented by io-pgtable.c.
Add a new format variant to support the required differences
so that we don't have to duplicate the pagetable handling code.
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210803121651.61594-2-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When two devices with same SID are getting probed concurrently through
iommu_probe_device(), the iommu_group sometimes is getting allocated more
than once as call to arm_smmu_device_group() is not protected for
concurrency. Furthermore, it leads to each device holding a different
iommu_group and domain pointer, separate IOVA space and only one of the
devices' domain is used for translations from IOMMU. This causes accesses
from other device to fault or see incorrect translations.
Fix this by protecting iommu_group allocation from concurrency in
arm_smmu_device_group().
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/1628570641-9127-3-git-send-email-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
When two devices with same SID are getting probed concurrently through
iommu_probe_device(), the iommu_domain sometimes is getting allocated more
than once as call to iommu_alloc_default_domain() is not protected for
concurrency. Furthermore, it leads to each device holding a different
iommu_domain pointer, separate IOVA space and only one of the devices'
domain is used for translations from IOMMU. This causes accesses from other
device to fault or see incorrect translations.
Fix this by protecting iommu_alloc_default_domain() call with group->mutex
and let all devices with same SID share same iommu_domain.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/1628570641-9127-2-git-send-email-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Some clocks for SMMU can have parent as XO such as gpu_cc_hub_cx_int_clk
of GPU SMMU in QTI SC7280 SoC and in order to enter deep sleep states in
such cases, we would need to drop the XO clock vote in unprepare call and
this unprepare callback for XO is in RPMh (Resource Power Manager-Hardened)
clock driver which controls RPMh managed clock resources for new QTI SoCs.
Given we cannot have a sleeping calls such as clk_bulk_prepare() and
clk_bulk_unprepare() in arm-smmu runtime pm callbacks since the iommu
operations like map and unmap can be in atomic context and are in fast
path, add this prepare and unprepare call to drop the XO vote only for
system pm callbacks since it is not a fast path and we expect the system
to enter deep sleep states with system pm as opposed to runtime pm.
This is a similar sequence of clock requests (prepare,enable and
disable,unprepare) in arm-smmu probe and remove.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Co-developed-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/20210810064808.32486-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Return appropriate error codes EINVAL or ENOMEM from
iommup_dma_map_sg(). If lower level code returns ENOMEM, then we
return it, other errors are coalesced into EINVAL.
iommu_dma_map_sg_swiotlb() returns -EIO as its an unknown error
from a call that returns DMA_MAPPING_ERROR.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Convert to ssize_t return code so the return code from __iommu_map()
can be returned all the way down through dma_iommu_map_sg().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the new use of the variable introduced in the AMD driver branch.
The variable was removed already in the iommu core branch, causing build
errors when the brances are merged.
Cc: Nadav Amit <namit@vmware.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210802150643.3634-1-joro@8bytes.org
Implement the map_pages() callback for ARM SMMUV3 driver to allow calls
from iommu_map to map multiple pages of the same size in one call.
Also remove the map() callback for the ARM SMMUV3 driver as it will no
longer be used.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1627697831-158822-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the unmap_pages() callback for ARM SMMUV3 driver to allow calls
from iommu_unmap to unmap multiple pages of the same size in one call.
Also remove the unmap() callback for the ARM SMMUV3 driver as it will
no longer be used.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1627697831-158822-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If probe_device is failing, iommu_group is not initialized because
iommu_group_add_device is not reached, so freeing it will result
in NULL pointer access.
iommu_bus_init
->bus_iommu_probe
->probe_iommu_group in for each:/* return -22 in fail case */
->iommu_probe_device
->__iommu_probe_device /* return -22 here.*/
-> ops->probe_device /* return -22 here.*/
-> iommu_group_get_for_dev
-> ops->device_group
-> iommu_group_add_device //good case
->remove_iommu_group //in fail case, it will remove group
->iommu_release_device
->iommu_group_remove_device // here we don't have group
In my case ops->probe_device (mtk_iommu_probe_device from
mtk_iommu_v1.c) is due to failing fwspec->ops mismatch.
Fixes: d72e31c937 ("iommu: IOMMU Groups")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20210731074737.4573-1-linux@fw-web.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Members of struct "llq" will be zero-inited, apart from member max_n_shift.
But we write llq.val straight after the init, so it was pointless to zero
init those other members. As such, separately init member max_n_shift
only.
In addition, struct "head" is initialised to "llq" only so that member
max_n_shift is set. But that member is never referenced for "head", so
remove any init there.
Removing these initializations is seen as a small performance optimisation,
as this code is (very) hot path.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1624293394-202509-1-git-send-email-john.garry@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When running on an AMD vIOMMU, it is better to avoid TLB flushes
of unmodified PTEs. vIOMMUs require the hypervisor to synchronize the
virtualized IOMMU's PTEs with the physical ones. This process induce
overheads.
AMD IOMMU allows us to flush any range that is aligned to the power of
2. So when running on top of a vIOMMU, break the range into sub-ranges
that are naturally aligned, and flush each one separately. This apporach
is better when running with a vIOMMU, but on physical IOMMUs, the
penalty of IOTLB misses due to unnecessary flushed entries is likely to
be low.
Repurpose (i.e., keeping the name, changing the logic)
domain_flush_pages() so it is used to choose whether to perform one
flush of the whole range or multiple ones to avoid flushing unnecessary
ranges. Use NpCache, as usual, to infer whether the IOMMU is physical or
virtual.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-8-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On virtual machines, software must flush the IOTLB after each page table
entry update.
The iommu_map_sg() code iterates through the given scatter-gather list
and invokes iommu_map() for each element in the scatter-gather list,
which calls into the vendor IOMMU driver through iommu_ops callback. As
the result, a single sg mapping may lead to multiple IOTLB flushes.
Fix this by adding amd_iotlb_sync_map() callback and flushing at this
point after all sg mappings we set.
This commit is followed and inspired by commit 933fcd01e9
("iommu/vt-d: Add iotlb_sync_map callback").
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-7-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD's IOMMU can flush efficiently (i.e., in a single flush) any range.
This is in contrast, for instnace, to Intel IOMMUs that have a limit on
the number of pages that can be flushed in a single flush. In addition,
AMD's IOMMU do not care about the page-size, so changes of the page size
do not need to trigger a TLB flush.
So in most cases, a TLB flush due to disjoint range is not needed for
AMD. Yet, vIOMMUs require the hypervisor to synchronize the virtualized
IOMMU's PTEs with the physical ones. This process induce overheads, so
it is better not to cause unnecessary flushes, i.e., flushes of PTEs
that were not modified.
Implement and use amd_iommu_iotlb_gather_add_page() and use it instead
of the generic iommu_iotlb_gather_add_page(). Ignore disjoint regions
unless "non-present cache" feature is reported by the IOMMU
capabilities, as this is an indication we are running on a physical
IOMMU. A similar indication is used by VT-d (see "caching mode"). The
new logic retains the same flushing behavior that we had before the
introduction of page-selective IOTLB flushes for AMD.
On virtualized environments, check if the newly flushed region and the
gathered one are disjoint and flush if it is.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-6-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Mediatek driver is not the only one which might want a basic
address-based gathering behaviour, so although it's arguably simple
enough to open-code, let's factor it out for the sake of cleanliness.
Let's also take this opportunity to document the intent of these
helpers for clarity.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-4-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Do not use flush-queue on virtualized environments, where the NpCache
capability of the IOMMU is set. This is required to reduce
virtualization overheads.
This change follows a similar change to Intel's VT-d and a detailed
explanation as for the rationale is described in commit 29b3283972
("iommu/vt-d: Do not use flush-queue when caching-mode is on").
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-3-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Recent patch attempted to enable selective page flushes on AMD IOMMU but
neglected to adapt amd_iommu_iotlb_sync() to use the selective flushes.
Adapt amd_iommu_iotlb_sync() to use selective flushes and change
amd_iommu_unmap() to collect the flushes. As a defensive measure, to
avoid potential issues as those that the Intel IOMMU driver encountered
recently, flush the page-walk caches by always setting the "pde"
parameter. This can be removed later.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-2-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, iommu_dma_alloc_noncontiguous() allocates a
struct dma_sgt_handle object to hold some state needed for
iommu_dma_free_noncontiguous().
However, the handle is neither freed nor returned explicitly by
the ->alloc_noncontiguous method, and therefore seems leaked.
This was found by code inspection, so please review carefully and test.
As a side note, it appears the struct dma_sgt_handle type is exposed
to users of the DMA-API by linux/dma-map-ops.h, but is has no users
or functions returning the type explicitly.
This may indicate it's a good idea to move the struct dma_sgt_handle type
to drivers/iommu/dma-iommu.c. The decision is left to maintainers :-)
Cc: stable@vger.kernel.org
Fixes: e817ee5f2f ("dma-iommu: implement ->alloc_noncontiguous")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210723010552.50969-1-ezequiel@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For the printing of RMP_HW_ERROR / RMP_PAGE_FAULT / IO_PAGE_FAULT
events, the AMD IOMMU code uses such logic:
if (pdev)
dev_data = dev_iommu_priv_get(&pdev->dev);
if (dev_data && __ratelimit(&dev_data->rs)) {
pci_err(pdev, ...
} else {
printk_ratelimit() / pr_err{,_ratelimited}(...
}
This means that if we receive an event for a PCI devid which actually
does have a struct pci_dev and an attached struct iommu_dev_data, but
rate limiting kicks in, we'll fall back to the non-PCI branch of the
test, and print the event in a different format.
Fix this by changing the logic to:
if (dev_data) {
if (__ratelimit(&dev_data->rs)) {
pci_err(pdev, ...
}
} else {
pr_err_ratelimited(...
}
Suggested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/YPgk1dD1gPMhJXgY@wantstofly.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As the Intel VT-d driver has switched to use the iommu_ops.map_pages()
callback, multiple pages of the same size will be mapped in a call.
There's no need to put the clflush'es in iotlb_sync_map() callback.
Move them back into __domain_mapping() to simplify the code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210720020615.4144323-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the map_pages() and unmap_pages() callback for the Intel IOMMU
driver to allow calls from iommu core to map and unmap multiple pages of
the same size in one call. With map/unmap_pages() implemented, the prior
map/unmap callbacks are deprecated.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210720020615.4144323-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pgsize bitmap is used to advertise the page sizes our hardware supports
to the IOMMU core, which will then use this information to split physically
contiguous memory regions it is mapping into page sizes that we support.
Traditionally the IOMMU core just handed us the mappings directly, after
making sure the size is an order of a 4KiB page and that the mapping has
natural alignment. To retain this behavior, we currently advertise that we
support all page sizes that are an order of 4KiB.
We are about to utilize the new IOMMU map/unmap_pages APIs. We could change
this to advertise the real page sizes we support.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210720020615.4144323-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1626683578-64214-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If people are going to insist on calling iommu_iova_to_phys()
pointlessly and expecting it to work, we can at least do ourselves a
favour by handling those cases in the core code, rather than repeatedly
across an inconsistent handful of drivers.
Since all the existing drivers implement the internal callback, and any
future ones are likely to want to work with iommu-dma which relies on
iova_to_phys a fair bit, we may as well remove that currently-redundant
check as well and consider it mandatory.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/f564f3f6ff731b898ff7a898919bf871c2c7745a.1626354264.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We only ever now set strict mode enabled in iommu_set_dma_strict(), so
just remove the argument.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-7-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make IOMMU_DEFAULT_LAZY default for when AMD_IOMMU config is set, which
matches current behaviour.
For "fullflush" param, just call iommu_set_dma_strict(true) directly.
Since we get a strict vs lazy mode print already in iommu_subsys_init(),
and maintain a deprecation print when "fullflush" param is passed, drop the
prints in amd_iommu_init_dma_ops().
Finally drop global flag amd_iommu_unmap_flush, as it has no longer has any
purpose.
[jpg: Rebase for relocated file and drop amd_iommu_unmap_flush]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1626088340-5838-6-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make IOMMU_DEFAULT_LAZY default for when INTEL_IOMMU config is set,
as is current behaviour.
Also delete global flag intel_iommu_strict:
- In intel_iommu_setup(), call iommu_set_dma_strict(true) directly. Also
remove the print, as iommu_subsys_init() prints the mode and we have
already marked this param as deprecated.
- For cap_caching_mode() check in intel_iommu_setup(), call
iommu_set_dma_strict(true) directly; also reword the accompanying print
with a level downgrade and also add the missing '\n'.
- For Ironlake GPU, again call iommu_set_dma_strict(true) directly and
keep the accompanying print.
[jpg: Remove intel_iommu_strict]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-5-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
opportunity to set {lazy|strict} mode as default at build time. Then put
the two config options in an choice, as they are mutually exclusive.
[jpg: Make choice between strict and lazy only (and not passthrough)]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-4-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As well as the default domain type, it's useful to know whether strict
or lazy for DMA domains, so add this info in a separate print.
The (stict/lazy) mode may be also set via iommu.strict earlyparm, but
this will be processed prior to iommu_subsys_init(), so that print will be
accurate for drivers which don't set the mode via custom means.
For the drivers which set the mode via custom means - AMD and Intel drivers
- they maintain prints to inform a change in policy or that custom cmdline
methods to change policy are deprecated.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-3-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the x86 drivers support iommu.strict, deprecate the custom
methods.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-2-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the map_pages() callback for the ARM SMMU driver
to allow calls from iommu_map to map multiple pages of
the same size in one call. Also, remove the map() callback
for the ARM SMMU driver, as it will no longer be used.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-16-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the unmap_pages() callback for the ARM SMMU driver
to allow calls from iommu_unmap to unmap multiple pages of
the same size in one call. Also, remove the unmap() callback
for the SMMU driver, as it will no longer be used.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-15-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the unmap_pages() callback for the ARM LPAE io-pgtable
format.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-11-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The PTE methods currently operate on a single entry. In preparation
for manipulating multiple PTEs in one map or unmap call, allow them
to handle multiple PTEs.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-10-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since iommu_pgsize can calculate how many pages of the
same size can be mapped/unmapped before the next largest
page size boundary, add support for invoking an IOMMU
driver's map_pages() callback, if it provides one.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1623850736-389584-9-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extend iommu_pgsize() to populate an optional 'count' parameter so that
we can direct unmapping operation to the ->unmap_pages callback if it
has been provided by the driver.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1623850736-389584-8-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 'addr_merge' parameter to iommu_pgsize() is a fabricated address
intended to describe the alignment requirements to consider when
choosing an appropriate page size. On the iommu_map() path, this address
is the logical OR of the virtual and physical addresses.
Subsequent improvements to iommu_pgsize() will need to check the
alignment of the virtual and physical components of 'addr_merge'
independently, so pass them in as separate parameters and reconstruct
'addr_merge' locally.
No functional change.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1623850736-389584-7-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Avoid the potential for shifting values by amounts greater than the
width of their type by using a bitmap to compute page size in
iommu_pgsize().
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1623850736-389584-6-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Allow the qcom_scm driver to be loadable as a permenent module.
This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to
ensure that drivers that call into the qcom_scm driver are
also built as modules. While not ideal in some cases its the
only safe way I can find to avoid build errors without having
those drivers select QCOM_SCM and have to force it on (as
QCOM_SCM=n can be valid for those drivers).
Reviving this now that Saravana's fw_devlink defaults to on,
which should avoid loading troubles seen before.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20210707045320.529186-1-john.stultz@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Hi Linus,
Please, pull the following patches that fix many fall-through
warnings when building with Clang and -Wimplicit-fallthrough.
This pull-request also contains the patch for Makefile that enables
-Wimplicit-fallthrough for Clang, globally.
It's also important to notice that since we have adopted the use of
the pseudo-keyword macro fallthrough; we also want to avoid having
more /* fall through */ comments being introduced. Notice that contrary
to GCC, Clang doesn't recognize any comments as implicit fall-through
markings when the -Wimplicit-fallthrough option is enabled. So, in
order to avoid having more comments being introduced, we have to use
the option -Wimplicit-fallthrough=5 for GCC, which similar to Clang,
will cause a warning in case a code comment is intended to be used
as a fall-through marking. The patch for Makefile also enforces this.
We had almost 4,000 of these issues for Clang in the beginning,
and there might be a couple more out there when building some
architectures with certain configurations. However, with the
recent fixes I think we are in good shape and it is now possible
to enable -Wimplicit-fallthrough for Clang. :)
Thanks!
-----BEGIN PGP SIGNATURE-----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=XVNN
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-clang-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"This fixes many fall-through warnings when building with Clang and
-Wimplicit-fallthrough, and also enables -Wimplicit-fallthrough for
Clang, globally.
It's also important to notice that since we have adopted the use of
the pseudo-keyword macro fallthrough, we also want to avoid having
more /* fall through */ comments being introduced. Contrary to GCC,
Clang doesn't recognize any comments as implicit fall-through markings
when the -Wimplicit-fallthrough option is enabled.
So, in order to avoid having more comments being introduced, we use
the option -Wimplicit-fallthrough=5 for GCC, which similar to Clang,
will cause a warning in case a code comment is intended to be used as
a fall-through marking. The patch for Makefile also enforces this.
We had almost 4,000 of these issues for Clang in the beginning, and
there might be a couple more out there when building some
architectures with certain configurations. However, with the recent
fixes I think we are in good shape and it is now possible to enable
the warning for Clang"
* tag 'Wimplicit-fallthrough-clang-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
Makefile: Enable -Wimplicit-fallthrough for Clang
powerpc/smp: Fix fall-through warning for Clang
dmaengine: mpc512x: Fix fall-through warning for Clang
usb: gadget: fsl_qe_udc: Fix fall-through warning for Clang
powerpc/powernv: Fix fall-through warning for Clang
MIPS: Fix unreachable code issue
MIPS: Fix fall-through warnings for Clang
ASoC: Mediatek: MT8183: Fix fall-through warning for Clang
power: supply: Fix fall-through warnings for Clang
dmaengine: ti: k3-udma: Fix fall-through warning for Clang
s390: Fix fall-through warnings for Clang
dmaengine: ipu: Fix fall-through warning for Clang
iommu/arm-smmu-v3: Fix fall-through warning for Clang
mmc: jz4740: Fix fall-through warning for Clang
PCI: Fix fall-through warning for Clang
scsi: libsas: Fix fall-through warning for Clang
video: fbdev: Fix fall-through warning for Clang
math-emu: Fix fall-through warning
cpufreq: Fix fall-through warning for Clang
drm/msm: Fix fall-through warning in msm_gem_new_impl()
...
Restore bits 39 to 32 at correct position.
It reverses the operation done in rk_dma_addr_dte_v2().
Fixes: c55356c534 ("iommu: rockchip: Add support for iommu v2")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20210712101232.318589-1-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit 2b0140c696 ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
fixes an issue of "sub-device is removed where the context entry is cleared
for all aliases". But this commit didn't consider the PASID entry and PASID
table in VT-d scalable mode. This fix increases the coverage of scalable
mode.
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Fixes: 8038bdb855 ("iommu/vt-d: Only clear real DMA device's context entries")
Fixes: 2b0140c696 ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Cc: stable@vger.kernel.org # v5.6+
Cc: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210712071712.3416949-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This fixes a bug in context cache clear operation. The code was not
following the correct invalidation flow. A global device TLB invalidation
should be added after the IOTLB invalidation. At the same time, it
uses the domain ID from the context entry. But in scalable mode, the
domain ID is in PASID table entry, not context entry.
Fixes: 7373a8cc38 ("iommu/vt-d: Setup context and enable RID2PASID support")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210712071315.3416543-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
QCOM IOMMU driver calls bus_set_iommu() for every IOMMU device controller,
what fails for the second and latter IOMMU devices. This is intended and
must be not fatal to the driver registration process. Also the cleanup
path should take care of the runtime PM state, what is missing in the
current patch. Revert relevant changes to the QCOM IOMMU driver until
a proper fix is prepared.
This partially reverts commit 249c9dc6aa.
Fixes: 249c9dc6aa ("iommu/arm: Cleanup resources in case of probe error path")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210705065657.30356-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Update is_swiotlb_buffer to add a struct device argument. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Fix the following fallthrough warning (arm64-randconfig with Clang):
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:382:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller
driver cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining
management interfaces and communication (including bus model)
between partitions both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal
with identity mappings at boot and integration with ARM SMMU
pieces.
-----BEGIN PGP SIGNATURE-----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=kPg8
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Including:
- SMMU Updates from Will Deacon:
- SMMUv3: Support stalling faults for platform devices
- SMMUv3: Decrease defaults sizes for the event and PRI queues
- SMMUv2: Support for a new '->probe_finalize' hook, needed by Nvidia
- SMMUv2: Even more Qualcomm compatible strings
- SMMUv2: Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU:
available on x86
- Add the amd_iommu=force_enable command line option to
enable the IOMMU on platforms where they are known to cause
problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
-----BEGIN PGP SIGNATURE-----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=IxNB
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- SMMU Updates from Will Deacon:
- SMMUv3:
- Support stalling faults for platform devices
- Decrease defaults sizes for the event and PRI queues
- SMMUv2:
- Support for a new '->probe_finalize' hook, needed by Nvidia
- Even more Qualcomm compatible strings
- Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU
available on x86
- Add the amd_iommu=force_enable command line option to enable
the IOMMU on platforms where they are known to cause problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu/virtio: Enable x86 support
iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
ACPI: Add driver for the VIOT table
ACPI: Move IOMMU setup code out of IORT
ACPI: arm64: Move DMA setup operations out of IORT
iommu/vt-d: Fix dereference of pointer info before it is null checked
iommu: Update "iommu.strict" documentation
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu-v3: Remove unnecessary oom message
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/vt-d: Fix linker error on 32-bit
iommu/vt-d: No need to typecast
iommu/vt-d: Define counter explicitly as unsigned int
iommu/vt-d: Remove unnecessary braces
iommu/vt-d: Removed unused iommu_count in dmar domain
iommu/vt-d: Use bitfields for DMAR capabilities
iommu/vt-d: Use DEVICE_ATTR_RO macro
iommu/vt-d: Fix out-bounds-warning in intel/svm.c
iommu/vt-d: Add PRQ handling latency sampling
...
With the VIOT support in place, x86 platforms can now use the
virtio-iommu.
Because the other x86 IOMMU drivers aren't yet ready to use the
acpi_dma_setup() path, x86 doesn't implement arch_setup_dma_ops() at the
moment. Similarly to Vt-d and AMD IOMMU, clear the DMA ops and call
iommu_setup_dma_ops() from probe_finalize().
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-6-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Passing a 64-bit address width to iommu_setup_dma_ops() is valid on
virtual platforms, but isn't currently possible. The overflow check in
iommu_dma_init_domain() prevents this even when @dma_base isn't 0. Pass
a limit address instead of a size, so callers don't have to fake a size
to work around the check.
The base and limit parameters are being phased out, because:
* they are redundant for x86 callers. dma-iommu already reserves the
first page, and the upper limit is already in domain->geometry.
* they can now be obtained from dev->dma_range_map on Arm.
But removing them on Arm isn't completely straightforward so is left for
future work. As an intermediate step, simplify the x86 callers by
passing dummy limits.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The ACPI Virtual I/O Translation Table describes topology of
para-virtual platforms, similarly to vendor tables DMAR, IVRS and IORT.
For now it describes the relation between virtio-iommu and the endpoints
it manages.
Three steps are needed to configure DMA of endpoints:
(1) acpi_viot_init(): parse the VIOT table, find or create the fwnode
associated to each vIOMMU device. This needs to happen after
acpi_scan_init(), because it relies on the struct device and their
fwnode to be available.
(2) When probing the vIOMMU device, the driver registers its IOMMU ops
within the IOMMU subsystem. This step doesn't require any
intervention from the VIOT driver.
(3) viot_iommu_configure(): before binding the endpoint to a driver,
find the associated IOMMU ops. Register them, along with the
endpoint ID, into the device's iommu_fwspec.
If step (3) happens before step (2), it is deferred until the IOMMU is
initialized, then retried.
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
Add, via the adreno-smmu-priv interface, a way for the GPU to request
the SMMU to stall translation on faults, and then later resume the
translation, either retrying or terminating the current translation.
This will be used on the GPU side to "freeze" the GPU while we snapshot
useful state for devcoredump.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a callback in adreno-smmu-priv to read interesting SMMU
registers to provide an opportunity for a richer debug experience
in the GPU driver.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Call report_iommu_fault() to allow upper-level drivers to register their
own fault handlers.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The assignment of iommu from info->iommu occurs before info is null checked
hence leading to a potential null pointer dereference issue. Fix this by
assigning iommu and checking if iommu is null after null checking info.
Addresses-Coverity: ("Dereference before null check")
Fixes: 4c82b88696 ("iommu/vt-d: Allocate/register iopf queue for sva devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210611135024.32781-1-colin.king@canonical.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- SMMUv3:
* Support stalling faults for platform devices
* Decrease defaults sizes for the event and PRI queues
- SMMUv2:
* Support for a new '->probe_finalize' hook, needed by Nvidia
* Even more Qualcomm compatible strings
* Avoid Adreno TTBR1 quirk for DB820C platform
- Misc:
* Trivial cleanups/refactoring
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmDJ1GkQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPIRCAC5ia+H1CHxjWRDmn7A++6/mNMu3hRKJCFj
WqKkz6Af3BcYEbuZeflHEp7BgHUo9r0FdhcMyz7pPRfBDpqP+eRmTxfDtJFThkn4
uwQmL4E8CbYnZUOQC8uvj87JG/7AgtC4Yu1XNpux2i7PYDKIW+BsW1Sla62Sa4aQ
LDuowqWZwgAkLyRSfEa4xmmlD8FN9tSrPkZBM3G1t9ixyl2LFBRhrePpirSMe8X8
xolCg209fYq1G5DJlYmKwsuNU+eEAVc8HQJzucnOJlqSbHhxezWbKTiyp3H3FSoV
4B2+CQAPGZCCti86yT0F2Ha+p4LWoKvWb12rb7eFTrJGEA1bVDmi
=PNoV
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 5.14
- SMMUv3:
* Support stalling faults for platform devices
* Decrease defaults sizes for the event and PRI queues
- SMMUv2:
* Support for a new '->probe_finalize' hook, needed by Nvidia
* Even more Qualcomm compatible strings
* Avoid Adreno TTBR1 quirk for DB820C platform
- Misc:
* Trivial cleanups/refactoring
Merge in support for the Arm SMMU '->probe_finalize()' implementation
callback, which is required to prevent early faults in conjunction with
Nvidia's memory controller.
* for-thierry/arm-smmu:
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu: Implement ->probe_finalize()
Commit 0d97174aea ("iommu/arm-smmu: Implement ->probe_finalize()")
added a new optional ->probe_finalize callback to 'struct arm_smmu_impl'
but neglected to check that 'smmu->impl' is present prior to checking
if the new callback is present.
Add the missing check, which avoids dereferencing NULL when probing an
SMMU which doesn't require any implementation-specific callbacks:
| Unable to handle kernel NULL pointer dereference at virtual address
| 0000000000000070
|
| Call trace:
| arm_smmu_probe_finalize+0x14/0x48
| of_iommu_configure+0xe4/0x1b8
| of_dma_configure_id+0xf8/0x2d8
| pci_dma_configure+0x44/0x88
| really_probe+0xc0/0x3c0
Fixes: 0d97174aea ("iommu/arm-smmu: Implement ->probe_finalize()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Will Deacon <will@kernel.org>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210609125438.14369-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The reference counting issue happens in several exception handling paths
of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the
function forgets to decrease the refcount of "smmu" increased by
arm_smmu_rpm_get(), causing a refcount leak.
Fix this issue by jumping to "out" label when those error scenarios
occur.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/1623293391-17261-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the
refcount of the "smmu" even though the return value is less than 0.
The reference counting issue happens in some error handling paths of
arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get()
fails, the caller functions forget to decrease the refcount of "smmu"
increased by arm_smmu_rpm_get(), causing a refcount leak.
Fix this issue by calling pm_runtime_resume_and_get() instead of
pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount
balanced in case of failure.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1623293672-17954-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
Tegra186 requires the same SID override programming as Tegra194 in order
to seamlessly transition from the firmware framebuffer to the Linux
framebuffer, so the Tegra implementation needs to be used on Tegra186
devices as well.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-7-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The secure firmware keeps some SID override registers set as passthrough
in order to allow devices such as the display controller to operate with
no knowledge of SMMU translations until an operating system driver takes
over. This is needed in order to seamlessly transition from the firmware
framebuffer to the OS framebuffer.
Upon successfully attaching a device to the SMMU and in the process
creating identity mappings for memory regions that are being accessed,
the Tegra implementation will call into the memory controller driver to
program the override SIDs appropriately.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-6-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Parse the reg property in device tree and detect the number of instances
represented by a device tree node. This is subsequently needed in order
to support single-instance SMMUs with the Tegra implementation because
additional programming is needed to properly configure the SID override
registers in the memory controller.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-5-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Pull ARM SMMU driver change from Will Deacon to resolve dependencies
between memory controllers, Tegra ARM SoC and ARM SMMU drivers trees.
Further ARM SMMU changes for Tegra depend on the change in Will's tree
and on Tegra memory controllers drivers work done before by Thierry
Reding. Pulling Will's tree allows to apply the rest of this ARM SMMU
Tegra work via memory controllers drivers tree.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
A recent commit broke the build on 32-bit x86. The linker throws these
messages:
ld: drivers/iommu/intel/perf.o: in function `dmar_latency_snapshot':
perf.c:(.text+0x40c): undefined reference to `__udivdi3'
ld: perf.c:(.text+0x458): undefined reference to `__udivdi3'
The reason are the 64-bit divides in dmar_latency_snapshot(). Use the
div_u64() helper function for those.
Fixes: 55ee5e67a5 ("iommu/vt-d: Add common code for dmar latency performance monitors")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210610083120.29224-1-joro@8bytes.org
DMAR domain uses per DMAR refcount. It is indexed by iommu seq_id.
Older iommu_count is only incremented and decremented but no decisions
are taken based on this refcount. This is not of much use.
Hence, remove iommu_count and further simplify domain_detach_iommu()
by returning void.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210530075053.264218-1-parav@nvidia.com
Link: https://lore.kernel.org/r/20210610020115.1637656-21-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Replace a couple of calls to memcpy() with simple assignments in order
to fix the following out-of-bounds warning:
drivers/iommu/intel/svm.c:1198:4: warning: 'memcpy' offset [25, 32] from
the object at 'desc' is out of the bounds of referenced subobject
'qw2' with type 'long long unsigned int' at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &desc.qw2 and &resp.qw2, respectively.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210414201403.GA392764@embeddedor
Link: https://lore.kernel.org/r/20210610020115.1637656-18-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A debugfs interface /sys/kernel/debug/iommu/intel/dmar_perf_latency is
created to control and show counts of execution time ranges for various
types per DMAR. The interface may help debug any potential performance
issue.
By default, the interface is disabled.
Possible write value of /sys/kernel/debug/iommu/intel/dmar_perf_latency
0 - disable sampling all latency data
1 - enable sampling IOTLB invalidation latency data
2 - enable sampling devTLB invalidation latency data
3 - enable sampling intr entry cache invalidation latency data
4 - enable sampling prq handling latency data
Read /sys/kernel/debug/iommu/intel/dmar_perf_latency gives a snapshot
of sampling result of all enabled monitors.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210520031531.712333-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-15-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The execution time of some operations is very performance critical, such
as cache invalidation and PRQ processing time. This adds some common code
to monitor the execution time range of those operations. The interfaces
include enabling/disabling, checking status, updating sampling data and
providing a common string format for users.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210520031531.712333-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-14-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current VT-d implementation supports nested translation only if all
underlying IOMMUs support the nested capability. This is unnecessary
as the upper layer is allowed to create different containers and set
them with different type of iommu backend. The IOMMU driver needs to
guarantee that devices attached to a nested mode iommu_domain should
support nested capabilility.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210517065701.5078-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU driver reports the DMA fault reason in a decimal number
while the VT-d specification uses a hexadecimal one. It's inconvenient
that users need to covert them everytime before consulting the spec.
Let's use hexadecimal number for a DMA fault reason.
The fault message uses 0xffffffff as PASID for DMA requests w/o PASID.
This is confusing. Tweak this by adding "NO_PASID" explicitly.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210517065425.4953-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/iommu/intel/pasid.c follows this syntax, but
the content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc:
warning: Function parameter or member 'fmt' not described in 'pr_fmt'
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210523143245.19040-1-yashsri421@gmail.com
Link: https://lore.kernel.org/r/20210610020115.1637656-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct acpi_platform_list and function acpi_match_platform_list()
defined in include/linux/acpi.h are available only when CONFIG_ACPI is
enabled. Add protection to fix the build issues with !CONFIG_ACPI.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210609015511.3955-1-shawn.guo@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
This second version of the hardware block has a different bits
mapping for page table entries.
Add the ops matching to this new mapping.
Define a new compatible to distinguish it from the first version.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-5-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add internal ops to be able to handle incoming variant v2.
The goal is to keep the overall structure of the framework but
to allow to add the evolution of this hardware block.
The ops are global for a SoC because iommu domains are not
attached to a specific devices if they are for a virtuel device like
drm. Use a global variable shouldn't be since SoC usually doesn't
embedded different versions of the iommu hardware block.
If that happen one day a WARN_ON will be displayed at probe time.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-4-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Function iommu_group_store_type() is the only caller of the static
function iommu_change_dev_def_domain() and has performed
"if (WARN_ON(!group))" detection before calling it. So the one here is
redundant.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210513075815.6382-1-thunder.leizhen@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If device registration fails, remove sysfs attribute
and if setting bus callbacks fails, unregister the device
and cleanup the sysfs attribute.
Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Link: https://lore.kernel.org/r/20210608164559.204023-1-ameynarkhede03@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
both implement "arm,mmu-500" in some QTI SoCs and to run through
adreno smmu specific implementation such as enabling split pagetables
support, we need to match the "qcom,adreno-smmu" compatible first
before apss smmu or else we will be running apps smmu implementation
for adreno smmu and the additional features for adreno smmu is never
set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
and adreno smmu implementing "arm,mmu-500", so the adreno smmu
implementation is never reached because the current sequence checks
for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
specific impl and we never reach adreno smmu specific implementation.
Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/c42181d313fdd440011541a28cde8cd10fffb9d3.1623155117.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
A recent commit introduced this section mismatch warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x22a1f): Section mismatch in reference from the function detect_ivrs() to the variable .init.data:amd_iommu_force_enable
The reason is that detect_ivrs() is not marked __init while it should
be, because it is only called from another __init function. Mark
detect_ivrs() __init to get rid of the warning.
Fixes: b1e650db2c ("iommu/amd: Add amd_iommu=force_enable option")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210608122843.8413-1-joro@8bytes.org
Compiling the recent dma-iommu changes under 32-bit x86 triggers this
compile warning:
drivers/iommu/dma-iommu.c:249:5: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Wformat=]
The reason is that %llx is used to print a variable of type
phys_addr_t. Fix it by using the correct %pa format specifier for
phys_addr_t.
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Oza Pawandeep <poza@codeaurora.org>
Fixes: 571f316074 ("iommu/dma: Fix IOVA reserve dma ranges")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210607124905.27525-1-joro@8bytes.org
The only place of_iommu.h is needed is in drivers/of/device.c. Remove it
from everywhere else.
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210527193710.1281746-2-robh@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
of_get_dma_window() was added in 2012 and removed in 2014 in commit
8918465163 ("memory: Add NVIDIA Tegra memory controller support").
Remove it and simplify the header to use forward declarations for
structs rather than includes.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210527193710.1281746-1-robh@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is not necessary to put free_iova_mem() inside of spinlock/unlock
iova_rbtree_lock which only leads to more completion for the spinlock.
It has a small promote on the performance after the change. And also
rename private_free_iova() as remove_iova() because the function will not
free iova after that change.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1620647582-194621-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix IOVA reserve failure in the case when address of first memory region
listed in dma-ranges is equal to 0x0.
Fixes: aadad097cd ("iommu/dma: Reserve IOVA for PCIe inaccessible DMA address")
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20200914072319.6091-1-srinath.mannam@broadcom.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit d25f6ead16 ("iommu/arm-smmu-v3: Increase maximum size of queues")
expands the cmdq queue size to improve the success rate of concurrent
command queue space allocation by multiple cores. However, this extension
does not apply to evtq and priq, because for both of them, the SMMU driver
is the consumer. Instead, memory resources are wasted. Therefore, the
queue size of evtq and priq is restored to the original setting, one page.
Fixes: d25f6ead16 ("iommu/arm-smmu-v3: Increase maximum size of queues")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210531123553.9602-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When a device or driver misbehaves, it is possible to receive DMA fault
events much faster than we can print them out, causing a lock up of the
system and inability to cancel the source of the problem. Ratelimit
printing of events to help recovery.
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210531095648.118282-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The SMMU provides a Stall model for handling page faults in platform
devices. It is similar to PCIe PRI, but doesn't require devices to have
their own translation cache. Instead, faulting transactions are parked
and the OS is given a chance to fix the page tables and retry the
transaction.
Enable stall for devices that support it (opt-in by firmware). When an
event corresponds to a translation error, call the IOMMU fault handler.
If the fault is recoverable, it will call us back to terminate or
continue the stall.
To use stall device drivers need to enable IOMMU_DEV_FEAT_IOPF, which
initializes the fault queue for the device.
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210526161927.24268-4-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
db820c wants to use the qcom smmu path to get HUPCF set (which keeps
the GPU from wedging and then sometimes wedging the kernel after a
page fault), but it doesn't have separate pagetables support yet in
drm/msm so we can't go all the way to the TTBR1 path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210326231303.3071950-1-eric@anholt.net
Signed-off-by: Will Deacon <will@kernel.org>
Implement a ->probe_finalize() callback that can be used by vendor
implementations to perform extra programming necessary after devices
have been attached to the SMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-4-thierry.reding@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X
based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X.
Define acpi_platform_list for these platforms and match them using
acpi_match_platform_list() call, and create qcom_smmu_impl accordingly.
(np == NULL) is used to check ACPI boot, because fwnode of SMMU device
is a static allocation and thus helpers like has_acpi_companion() don't
work here.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210509022607.17534-1-shawn.guo@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that DMA ops are part of the core API via iommu-dma, fold the
vestigial remains of the IOMMU_DMA_OPS init state into the IOMMU API
phase, and clean up a few other leftovers. This should also close the
race window wherein bus_set_iommu() effectively makes the DMA ops state
visible before its nominal initialisation - it seems this was previously
fairly benign, but since commit a250c23f15 ("iommu: remove
DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE") it can now lead to the strict flush
queue policy inadvertently being picked for default domains allocated
during that window, with a corresponding unexpected perfomance impact.
Reported-by: Jussi Maki <joamaki@gmail.com>
Tested-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Fixes: a250c23f15 ("iommu: remove DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE")
Link: https://lore.kernel.org/r/665db61e23ff8d54ac5eb391bef520b3a803fcb9.1622727974.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add this option to enable the IOMMU on platforms like AMD Stoney,
where the kernel usually disables it because it may cause problems in
some scenarios.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210603130203.29016-1-joro@8bytes.org
print_iommu_info prints the EFR register and then the decoded list of
features on a separate line:
pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
The second line is emitted via 'pr_cont', which causes it to have a
different ('warn') loglevel compared to the previous line ('info').
Commit 9a295ff0ff attempted to rectify this by removing the newline
from the pci_info format string, but this doesn't work, as pci_info
calls implicitly append a newline anyway.
Printing the decoded features on the same line would make it quite long.
Instead, change pci_info() to pr_info() to omit PCI bus location info,
which is also shown in the preceding message. This results in:
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
Fixes: 9a295ff0ff ("iommu/amd: Print extended features in one line to fix divergent log levels")
Link: https://lore.kernel.org/lkml/alpine.LNX.2.20.13.2104112326460.11104@monopod.intra.ispras.ru
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20210504102220.1793-1-amonakov@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Subsequent patches will add more register fields to the tegra_mc_client
structure, so consolidate all register field definitions into a common
sub-structure for coherency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-2-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
When first-level page tables are used for IOVA translation, we use user
privilege by setting U/S bit in the page table entry. This is to make it
consistent with the second level translation, where the U/S enforcement
is not available. Clear the SRE (Supervisor Request Enable) field in the
pasid table entry of RID2PASID so that requests requesting the supervisor
privilege are blocked and treated as DMA remapping faults.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210512064426.3440915-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210519015027.108468-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Fixes: fa4afd78ea ("iommu/virtio: Build virtio-iommu as module")
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210508031451.53493-1-cuibixuan@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The logic to determine the mask of page-specific invalidations was
tested in userspace. As the code was copied into the kernel, the
parentheses were mistakenly set in the wrong place, resulting in the
wrong mask.
Fix it.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Fixes: 268aa45482 ("iommu/amd: Page-specific invalidations for more than one page")
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210502070001.1559127-2-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 08a27c1c3e ("iommu: Add support to change default domain
of an iommu group") a user can switch a device between IOMMU and direct
DMA through sysfs. This doesn't work for AMD IOMMU at the moment because
dev->dma_ops is not cleared when switching from a DMA to an identity
IOMMU domain. The DMA layer thus attempts to use the dma-iommu ops on an
identity domain, causing an oops:
# echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/unbind
# echo identity > /sys/bus/pci/devices/0000:00:05.0/iommu_group/type
# echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/bind
...
BUG: kernel NULL pointer dereference, address: 0000000000000028
...
Call Trace:
iommu_dma_alloc
e1000e_setup_tx_resources
e1000e_open
Since iommu_change_dev_def_domain() calls probe_finalize() again, clear
the dma_ops there like Vt-d does.
Fixes: 08a27c1c3e ("iommu: Add support to change default domain of an iommu group")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210422094216.2282097-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright noice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
-----BEGIN PGP SIGNATURE-----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=DJoy
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright notice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
* tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: add unlikely hint to error path in dma_mapping_error
dma-mapping: benchmark: Add support for multi-pages map/unmap
dma-mapping: benchmark: use the correct HiSilicon copyright
dma-mapping: remove a pointless empty line in dma_alloc_coherent
media: uvcvideo: Use dma_alloc_noncontiguous API
dma-iommu: implement ->alloc_noncontiguous
dma-iommu: refactor iommu_dma_alloc_remap
dma-mapping: add a dma_alloc_noncontiguous API
dma-mapping: refactor dma_{alloc,free}_pages
dma-mapping: add a dma_mmap_pages helper
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It happens that the 3 drivers which first supported being modular are
also ones which play games with their pgsize_bitmap, so have non-const
iommu_ops where dynamically setting the owner manages to work out OK.
However, it's less than ideal to force that upon all drivers which want
to be modular - like the new sprd-iommu driver which now has a potential
bug in that regard - so let's just statically set the module owner and
let ops remain const wherever possible.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/31423b99ff609c3d4b291c701a7a7a810d9ce8dc.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When this driver build as module, It build fail like:
ERROR: modpost: "of_phandle_iterator_args"
[drivers/iommu/mtk_iommu_v1.ko] undefined!
This patch remove this interface to avoid this build fail.
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210412064843.11614-1-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The variable 'i' in the function update_liodn_stash() is not
initialized and only used in a debug printk(). So it has no
meaning at all, remove it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210415144442.25103-1-joro@8bytes.org
The translation caches may preserve obsolete data when the
mapping size is changed, suppose the following sequence which
can reveal the problem with high probability.
1.mmap(4GB,MAP_HUGETLB)
2.
while (1) {
(a) DMA MAP 0,0xa0000
(b) DMA UNMAP 0,0xa0000
(c) DMA MAP 0,0xc0000000
* DMA read IOVA 0 may failure here (Not present)
* if the problem occurs.
(d) DMA UNMAP 0,0xc0000000
}
The page table(only focus on IOVA 0) after (a) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x1a30a72003 entry:0xffff89b39cacb000
PTE: 0x21d200803 entry:0xffff89b3b0a72000
The page table after (b) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x1a30a72003 entry:0xffff89b39cacb000
PTE: 0x0 entry:0xffff89b3b0a72000
The page table after (c) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x21d200883 entry:0xffff89b39cacb000 (*)
Because the PDE entry after (b) is present, it won't be
flushed even if the iommu driver flush cache when unmap,
so the obsolete data may be preserved in cache, which
would cause the wrong translation at end.
However, we can see the PDE entry is finally switch to
2M-superpage mapping, but it does not transform
to 0x21d200883 directly:
1. PDE: 0x1a30a72003
2. __domain_mapping
dma_pte_free_pagetable
Set the PDE entry to ZERO
Set the PDE entry to 0x21d200883
So we must flush the cache after the entry switch to ZERO
to avoid the obsolete info be preserved.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Fixes: 6491d4d028 ("intel-iommu: Free old page tables before creating superpage")
Cc: <stable@vger.kernel.org> # v3.0+
Link: https://lore.kernel.org/linux-iommu/670baaf8-4ff8-4e84-4be3-030b95ab5a5e@huawei.com/
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210415004628.1779-1-longpeng2@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit f68c7f539b ("iommu/vt-d: Enable write protect for supervisor
SVM") added pasid_enable_wpe() which hit below compile error with !X86.
../drivers/iommu/intel/pasid.c: In function 'pasid_enable_wpe':
../drivers/iommu/intel/pasid.c:554:22: error: implicit declaration of function 'read_cr0' [-Werror=implicit-function-declaration]
554 | unsigned long cr0 = read_cr0();
| ^~~~~~~~
In file included from ../include/linux/build_bug.h:5,
from ../include/linux/bits.h:22,
from ../include/linux/bitops.h:6,
from ../drivers/iommu/intel/pasid.c:12:
../drivers/iommu/intel/pasid.c:557:23: error: 'X86_CR0_WP' undeclared (first use in this function)
557 | if (unlikely(!(cr0 & X86_CR0_WP))) {
| ^~~~~~~~~~
../include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
78 | # define unlikely(x) __builtin_expect(!!(x), 0)
| ^
../drivers/iommu/intel/pasid.c:557:23: note: each undeclared identifier is reported only once for each function it appears in
557 | if (unlikely(!(cr0 & X86_CR0_WP))) {
| ^~~~~~~~~~
../include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
78 | # define unlikely(x) __builtin_expect(!!(x), 0)
|
Add the missing dependency.
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f68c7f539b ("iommu/vt-d: Enable write protect for supervisor SVM")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20210411062312.3057579-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In early AMD desktop/mobile platforms (during 2013), when the IOMMU
Performance Counter (PMC) support was first introduced in
commit 30861ddc9c ("perf/x86/amd: Add IOMMU Performance Counter
resource management"), there was a HW bug where the counters could not
be accessed. The result was reading of the counter always return zero.
At the time, the suggested workaround was to add a test logic prior
to initializing the PMC feature to check if the counters can be programmed
and read back the same value. This has been working fine until the more
recent desktop/mobile platforms start enabling power gating for the PMC,
which prevents access to the counters. This results in the PMC support
being disabled unnecesarily.
Unfortunatly, there is no documentation of since which generation
of hardware the original PMC HW bug was fixed. Although, it was fixed
soon after the first introduction of the PMC. Base on this, we assume
that the buggy platforms are less likely to be in used, and it should
be relatively safe to remove this legacy logic.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210409085848.3908-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit 6778ff5b21.
The original commit tries to address an issue, where PMC power-gating
causing the IOMMU PMC pre-init test to fail on certain desktop/mobile
platforms where the power-gating is normally enabled.
There have been several reports that the workaround still does not
guarantee to work, and can add up to 100 ms (on the worst case)
to the boot process on certain platforms such as the MSI B350M MORTAR
with AMD Ryzen 3 2200G.
Therefore, revert this commit as a prelude to removing the pre-init
test.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210409085848.3908-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
'devid' has been checked in function check_device, no need to double
check and clean up this.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1617939040-35579-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The initialization of 'fault_addr' local variable is not needed as it is
shortly after overwritten.
Addresses-Coverity: Unused value
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210408201622.78009-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, IOMMU invalidations and device-IOTLB invalidations using
AMD IOMMU fall back to full address-space invalidation if more than a
single page need to be flushed.
Full flushes are especially inefficient when the IOMMU is virtualized by
a hypervisor, since it requires the hypervisor to synchronize the entire
address-space.
AMD IOMMUs allow to provide a mask to perform page-specific
invalidations for multiple pages that match the address. The mask is
encoded as part of the address, and the first zero bit in the address
(in bits [51:12]) indicates the mask size.
Use this hardware feature to perform selective IOMMU and IOTLB flushes.
Combine the logic between both for better code reuse.
The IOMMU invalidations passed a smoke-test. The device IOTLB
invalidations are untested.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210323210619.513069-1-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Per SMMUv3 spec, there is no Size and Addr field in the PREFETCH_CONFIG
command and they're not used by the driver. Remove them.
We can add them back if we're going to use PREFETCH_ADDR in the future.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20210407084448.1838-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When a present pasid entry is disassembled, all kinds of pasid related
caches need to be flushed. But when a pasid entry is not being used
(PRESENT bit not set), we don't need to do this. Check the PRESENT bit
in intel_pasid_tear_down_entry() and avoid flushing caches if it's not
set.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the Intel IOMMU is operating in the scalable mode, some information
from the root and context table may be used to tag entries in the PASID
cache. Software should invalidate the PASID-cache when changing root or
context table entries.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: 7373a8cc38 ("iommu/vt-d: Setup context and enable RID2PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Address field of the Page Request Descriptor only keeps bit [63:12]
of the offending address. Convert it to a full address before reporting
it to device drivers.
Fixes: eb8d93ea3c ("iommu/vt-d: Report page request faults for guest SVA")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A few functions that were intentended for the perf events support are
currently declared in arch/x86/events/amd/iommu.h, which mens they are
not in scope for the actual function definition. Also amdkfd has started
using a few of them using externs in a .c file. End that misery by
moving the prototypes to the proper header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove exports for functions that are only used in the AMD IOMMU driver
itself, or the also always builtin perf events support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use an explicit set_pgtable_quirks method instead that just passes
the actual quirk bitmask instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-20-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead make the global iommu_dma_strict paramete in iommu.c canonical by
exporting helpers to get and set it and use those directly in the drivers.
This make sure that the iommu.strict parameter also works for the AMD and
Intel IOMMU drivers on x86. As those default to lazy flushing a new
IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to
represent the default if not overriden by an explicit parameter.
[ported on top of the other iommu_attr changes and added a few small
missing bits]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use an explicit enable_nesting method instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-17-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The geometry information can be trivially queried from the iommu_domain
struture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-16-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
DOMAIN_ATTR_PAGING is never used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-15-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The win_addr and win_size parameters are always set to 0 and 1 << 36
respectively, so just hard code them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-14-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The snoop_id is always set to ~(u32)0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-12-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
