One target of PCP is to minimize pages in PCP if the system free pages is
too few. To reach that target, when page reclaiming is active for the
zone (ZONE_RECLAIM_ACTIVE), we will stop increasing PCP high in allocating
path, decrease PCP high and free some pages in freeing path. But this may
be too late because the background page reclaiming may introduce latency
for some workloads. So, in this patch, during page allocation we will
detect whether the number of free pages of the zone is below high
watermark. If so, we will stop increasing PCP high in allocating path,
decrease PCP high and free some pages in freeing path. With this, we can
reduce the possibility of the premature background page reclaiming caused
by too large PCP.
The high watermark checking is done in allocating path to reduce the
overhead in hotter freeing path.
Link: https://lkml.kernel.org/r/20231016053002.756205-9-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The target to tune PCP high automatically is as follows,
- Minimize allocation/freeing from/to shared zone
- Minimize idle pages in PCP
- Minimize pages in PCP if the system free pages is too few
To reach these target, a tuning algorithm as follows is designed,
- When we refill PCP via allocating from the zone, increase PCP high.
Because if we had larger PCP, we could avoid to allocate from the
zone.
- In periodic vmstat updating kworker (via refresh_cpu_vm_stats()),
decrease PCP high to try to free possible idle PCP pages.
- When page reclaiming is active for the zone, stop increasing PCP
high in allocating path, decrease PCP high and free some pages in
freeing path.
So, the PCP high can be tuned to the page allocating/freeing depth of
workloads eventually.
One issue of the algorithm is that if the number of pages allocated is
much more than that of pages freed on a CPU, the PCP high may become the
maximal value even if the allocating/freeing depth is small. But this
isn't a severe issue, because there are no idle pages in this case.
One alternative choice is to increase PCP high when we drain PCP via
trying to free pages to the zone, but don't increase PCP high during PCP
refilling. This can avoid the issue above. But if the number of pages
allocated is much less than that of pages freed on a CPU, there will be
many idle pages in PCP and it is hard to free these idle pages.
1/8 (>> 3) of PCP high will be decreased periodically. The value 1/8 is
kind of arbitrary. Just to make sure that the idle PCP pages will be
freed eventually.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
build time decreases 3.5%. The cycles% of the spinlock contention (mostly
for zone lock) decreases from 11.0% to 0.5%. The number of PCP draining
for high order pages freeing (free_high) decreases 65.6%. The number of
pages allocated from zone (instead of from PCP) decreases 83.9%.
Link: https://lkml.kernel.org/r/20231016053002.756205-8-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Suggested-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page allocation performance requirements of different workloads are
usually different. So, we need to tune PCP (per-CPU pageset) high to
optimize the workload page allocation performance. Now, we have a system
wide sysctl knob (percpu_pagelist_high_fraction) to tune PCP high by hand.
But, it's hard to find out the best value by hand. And one global
configuration may not work best for the different workloads that run on
the same system. One solution to these issues is to tune PCP high of each
CPU automatically.
This patch adds the framework for PCP high auto-tuning. With it,
pcp->high of each CPU will be changed automatically by tuning algorithm at
runtime. The minimal high (pcp->high_min) is the original PCP high value
calculated based on the low watermark pages. While the maximal high
(pcp->high_max) is the PCP high value when percpu_pagelist_high_fraction
sysctl knob is set to MIN_PERCPU_PAGELIST_HIGH_FRACTION. That is, the
maximal pcp->high that can be set via sysctl knob by hand.
It's possible that PCP high auto-tuning doesn't work well for some
workloads. So, when PCP high is tuned by hand via the sysctl knob, the
auto-tuning will be disabled. The PCP high set by hand will be used
instead.
This patch only adds the framework, so pcp->high will be set to
pcp->high_min (original default) always. We will add actual auto-tuning
algorithm in the following patches in the series.
Link: https://lkml.kernel.org/r/20231016053002.756205-7-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a task is allocating a large number of order-0 pages, it may acquire
the zone->lock multiple times allocating pages in batches. This may
unnecessarily contend on the zone lock when allocating very large number
of pages. This patch adapts the size of the batch based on the recent
pattern to scale the batch size for subsequent allocations.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
cycles% of the spinlock contention (mostly for zone lock) decreases from
12.6% to 11.0% (with PCP size == 367).
Link: https://lkml.kernel.org/r/20231016053002.756205-6-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In page allocator, PCP (Per-CPU Pageset) is refilled and drained in
batches to increase page allocation throughput, reduce page
allocation/freeing latency per page, and reduce zone lock contention. But
too large batch size will cause too long maximal allocation/freeing
latency, which may punish arbitrary users. So the default batch size is
chosen carefully (in zone_batchsize(), the value is 63 for zone > 1GB) to
avoid that.
In commit 3b12e7e979 ("mm/page_alloc: scale the number of pages that are
batch freed"), the batch size will be scaled for large number of page
freeing to improve page freeing performance and reduce zone lock
contention. Similar optimization can be used for large number of pages
allocation too.
To find out a suitable max batch scale factor (that is, max effective
batch size), some tests and measurement on some machines were done as
follows.
A set of debug patches are implemented as follows,
- Set PCP high to be 2 * batch to reduce the effect of PCP high
- Disable free batch size scaling to get the raw performance.
- The code with zone lock held is extracted from rmqueue_bulk() and
free_pcppages_bulk() to 2 separate functions to make it easy to
measure the function run time with ftrace function_graph tracer.
- The batch size is hard coded to be 63 (default), 127, 255, 511,
1023, 2047, 4095.
Then will-it-scale/page_fault1 is used to generate the page
allocation/freeing workload. The page allocation/freeing throughput
(page/s) is measured via will-it-scale. The page allocation/freeing
average latency (alloc/free latency avg, in us) and allocation/freeing
latency at 99 percentile (alloc/free latency 99%, in us) are measured with
ftrace function_graph tracer.
The test results are as follows,
Sapphire Rapids Server
======================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 513633.4 2.33 3.57 2.67 6.83
127 517616.7 4.35 6.65 4.22 13.03
255 520822.8 8.29 13.32 7.52 25.24
511 524122.0 15.79 23.42 14.02 49.35
1023 525980.5 30.25 44.19 25.36 94.88
2047 526793.6 59.39 84.50 45.22 140.81
Ice Lake Server
===============
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 620210.3 2.21 3.68 2.02 4.35
127 627003.0 4.09 6.86 3.51 8.28
255 630777.5 7.70 13.50 6.17 15.97
511 633651.5 14.85 22.62 11.66 31.08
1023 637071.1 28.55 42.02 20.81 54.36
2047 638089.7 56.54 84.06 39.28 91.68
Cascade Lake Server
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 404706.7 3.29 5.03 3.53 4.75
127 422475.2 6.12 9.09 6.36 8.76
255 411522.2 11.68 16.97 10.90 16.39
511 428124.1 22.54 31.28 19.86 32.25
1023 414718.4 43.39 62.52 40.00 66.33
2047 429848.7 86.64 120.34 71.14 106.08
Commet Lake Desktop
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 795183.13 2.18 3.55 2.03 3.05
127 803067.85 3.91 6.56 3.85 5.52
255 812771.10 7.35 10.80 7.14 10.20
511 817723.48 14.17 27.54 13.43 30.31
1023 818870.19 27.72 40.10 27.89 46.28
Coffee Lake Desktop
===================
Batch throughput free latency free latency alloc latency alloc latency
page/s avg / us 99% / us avg / us 99% / us
----- ---------- ------------ ------------ ------------- -------------
63 510542.8 3.13 4.40 2.48 3.43
127 514288.6 5.97 7.89 4.65 6.04
255 516889.7 11.86 15.58 8.96 12.55
511 519802.4 23.10 28.81 16.95 26.19
1023 520802.7 45.30 52.51 33.19 45.95
2047 519997.1 90.63 104.00 65.26 81.74
From the above data, to restrict the allocation/freeing latency to be less
than 100 us in most times, the max batch scale factor needs to be less
than or equal to 5.
Although it is reasonable to use 5 as max batch scale factor for the
systems tested, there are also slower systems. Where smaller value should
be used to constrain the page allocation/freeing latency.
So, in this patch, a new kconfig option (PCP_BATCH_SCALE_MAX) is added to
set the max batch scale factor. Whose default value is 5, and users can
reduce it when necessary.
Link: https://lkml.kernel.org/r/20231016053002.756205-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In commit f26b3fa046 ("mm/page_alloc: limit number of high-order pages
on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when
PCP is mostly used for high-order pages freeing to improve the cache-hot
pages reusing between page allocating and freeing CPUs.
On system with small per-CPU data cache slice, pages shouldn't be cached
before draining to guarantee cache-hot. But on a system with large
per-CPU data cache slice, some pages can be cached before draining to
reduce zone lock contention.
So, in this patch, instead of draining without any caching, "pcp->batch"
pages will be cached in PCP before draining if the size of the per-CPU
data cache slice is more than "3 * batch".
In theory, if the size of per-CPU data cache slice is more than "2 *
batch", we can reuse cache-hot pages between CPUs. But considering the
other usage of cache (code, other data accessing, etc.), "3 * batch" is
used.
Note: "3 * batch" is chosen to make sure the optimization works on recent
x86_64 server CPUs. If you want to increase it, please check whether it
breaks the optimization.
On a 2-socket Intel server with 128 logical CPU, with the patch, the
network bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite
with 16-pair processes increase 70.5%. The cycles% of the spinlock
contention (mostly for zone lock) decreases from 46.1% to 21.3%. The
number of PCP draining for high order pages freeing (free_high) decreases
89.9%. The cache miss rate keeps 0.2%.
Link: https://lkml.kernel.org/r/20231016053002.756205-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This can be used to estimate the size of the data cache slice that can be
used by one CPU under ideal circumstances. Both DATA caches and UNIFIED
caches are used in calculation. So, the users need to consider the impact
of the code cache usage.
Because the cache inclusive/non-inclusive information isn't available now,
we just use the size of the per-CPU slice of LLC to make the result more
predictable across architectures. This may be improved when more cache
information is available in the future.
A brute-force algorithm to iterate all online CPUs is used to avoid to
allocate an extra cpumask, especially in offline callback.
Link: https://lkml.kernel.org/r/20231016053002.756205-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: PCP high auto-tuning", v3.
The page allocation performance requirements of different workloads are
often different. So, we need to tune the PCP (Per-CPU Pageset) high on
each CPU automatically to optimize the page allocation performance.
The list of patches in series is as follows,
[1/9] mm, pcp: avoid to drain PCP when process exit
[2/9] cacheinfo: calculate per-CPU data cache size
[3/9] mm, pcp: reduce lock contention for draining high-order pages
[4/9] mm: restrict the pcp batch scale factor to avoid too long latency
[5/9] mm, page_alloc: scale the number of pages that are batch allocated
[6/9] mm: add framework for PCP high auto-tuning
[7/9] mm: tune PCP high automatically
[8/9] mm, pcp: decrease PCP high if free pages < high watermark
[9/9] mm, pcp: reduce detecting time of consecutive high order page freeing
Patch [1/9], [2/9], [3/9] optimize the PCP draining for consecutive
high-order pages freeing.
Patch [4/9], [5/9] optimize batch freeing and allocating.
Patch [6/9], [7/9], [8/9] implement and optimize a PCP high
auto-tuning method.
Patch [9/9] optimize the PCP draining for consecutive high order page
freeing based on PCP high auto-tuning.
The test results for patches with performance impact are as follows,
kbuild
======
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service.
build time lock contend% free_high alloc_zone
---------- ---------- --------- ----------
base 100.0 14.0 100.0 100.0
patch1 99.5 12.8 19.5 95.6
patch3 99.4 12.6 7.1 95.6
patch5 98.6 11.0 8.1 97.1
patch7 95.1 0.5 2.8 15.6
patch9 95.0 1.0 8.8 20.0
The PCP draining optimization (patch [1/9], [3/9]) and PCP batch
allocation optimization (patch [5/9]) reduces zone lock contention a
little. The PCP high auto-tuning (patch [7/9], [9/9]) reduces build time
visibly. Where the tuning target: the number of pages allocated from zone
reduces greatly. So, the zone contention cycles% reduces greatly.
With PCP tuning patches (patch [7/9], [9/9]), the average used memory
during test increases up to 18.4% because more pages are cached in PCP.
But at the end of the test, the number of the used memory decreases to the
same level as that of the base patch. That is, the pages cached in PCP
will be released to zone after not being used actively.
netperf SCTP_STREAM_MANY
========================
On a 2-socket Intel server with 128 logical CPU, we tested
SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes.
score lock contend% free_high alloc_zone cache miss rate%
----- ---------- --------- ---------- ----------------
base 100.0 2.1 100.0 100.0 1.3
patch1 99.4 2.1 99.4 99.4 1.3
patch3 106.4 1.3 13.3 106.3 1.3
patch5 106.0 1.2 13.2 105.9 1.3
patch7 103.4 1.9 6.7 90.3 7.6
patch9 108.6 1.3 13.7 108.6 1.3
The PCP draining optimization (patch [1/9]+[3/9]) improves performance.
The PCP high auto-tuning (patch [7/9]) reduces performance a little
because PCP draining cannot be triggered in time sometimes. So, the cache
miss rate% increases. The further PCP draining optimization (patch [9/9])
based on PCP tuning restore the performance.
lmbench3 UNIX (AF_UNIX)
=======================
On a 2-socket Intel server with 128 logical CPU, we tested UNIX
(AF_UNIX socket) test case of lmbench3 test suite with 16-pair
processes.
score lock contend% free_high alloc_zone cache miss rate%
----- ---------- --------- ---------- ----------------
base 100.0 51.4 100.0 100.0 0.2
patch1 116.8 46.1 69.5 104.3 0.2
patch3 199.1 21.3 7.0 104.9 0.2
patch5 200.0 20.8 7.1 106.9 0.3
patch7 191.6 19.9 6.8 103.8 2.8
patch9 193.4 21.7 7.0 104.7 2.1
The PCP draining optimization (patch [1/9], [3/9]) improves performance
much. The PCP tuning (patch [7/9]) reduces performance a little because
PCP draining cannot be triggered in time sometimes. The further PCP
draining optimization (patch [9/9]) based on PCP tuning restores the
performance partly.
The patchset adds several fields in struct per_cpu_pages. The struct
layout before/after the patchset is as follows,
base
====
struct per_cpu_pages {
spinlock_t lock; /* 0 4 */
int count; /* 4 4 */
int high; /* 8 4 */
int batch; /* 12 4 */
short int free_factor; /* 16 2 */
short int expire; /* 18 2 */
/* XXX 4 bytes hole, try to pack */
struct list_head lists[13]; /* 24 208 */
/* size: 256, cachelines: 4, members: 7 */
/* sum members: 228, holes: 1, sum holes: 4 */
/* padding: 24 */
} __attribute__((__aligned__(64)));
patched
=======
struct per_cpu_pages {
spinlock_t lock; /* 0 4 */
int count; /* 4 4 */
int high; /* 8 4 */
int high_min; /* 12 4 */
int high_max; /* 16 4 */
int batch; /* 20 4 */
u8 flags; /* 24 1 */
u8 alloc_factor; /* 25 1 */
u8 expire; /* 26 1 */
/* XXX 1 byte hole, try to pack */
short int free_count; /* 28 2 */
/* XXX 2 bytes hole, try to pack */
struct list_head lists[13]; /* 32 208 */
/* size: 256, cachelines: 4, members: 11 */
/* sum members: 237, holes: 2, sum holes: 3 */
/* padding: 16 */
} __attribute__((__aligned__(64)));
The size of the struct doesn't changed with the patchset.
This patch (of 9):
In commit f26b3fa046 ("mm/page_alloc: limit number of high-order pages
on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when
PCP is mostly used for high-order pages freeing to improve the cache-hot
pages reusing between page allocation and freeing CPUs.
But, the PCP draining mechanism may be triggered unexpectedly when process
exits. With some customized trace point, it was found that PCP draining
(free_high == true) was triggered with the order-1 page freeing with the
following call stack,
=> free_unref_page_commit
=> free_unref_page
=> __mmdrop
=> exit_mm
=> do_exit
=> do_group_exit
=> __x64_sys_exit_group
=> do_syscall_64
Checking the source code, this is the page table PGD freeing
(mm_free_pgd()). It's a order-1 page freeing if
CONFIG_PAGE_TABLE_ISOLATION=y. Which is a common configuration for
security.
Just before that, page freeing with the following call stack was found,
=> free_unref_page_commit
=> free_unref_page_list
=> release_pages
=> tlb_batch_pages_flush
=> tlb_finish_mmu
=> exit_mmap
=> __mmput
=> exit_mm
=> do_exit
=> do_group_exit
=> __x64_sys_exit_group
=> do_syscall_64
So, when a process exits,
- a large number of user pages of the process will be freed without
page allocation, it's highly possible that pcp->free_factor becomes >
0. In fact, this is expected behavior to improve process exit
performance.
- after freeing all user pages, the PGD will be freed, which is a
order-1 page freeing, PCP will be drained.
All in all, when a process exits, it's high possible that the PCP will be
drained. This is an unexpected behavior.
To avoid this, in the patch, the PCP draining will only be triggered for 2
consecutive high-order page freeing.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
cycles% of the spinlock contention (mostly for zone lock) decreases from
14.0% to 12.8% (with PCP size == 367). The number of PCP draining for
high order pages freeing (free_high) decreases 80.5%.
This helps network workload too for reduced zone lock contention. On a
2-socket Intel server with 128 logical CPU, with the patch, the network
bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite with
16-pair processes increase 16.8%. The cycles% of the spinlock contention
(mostly for zone lock) decreases from 51.4% to 46.1%. The number of PCP
draining for high order pages freeing (free_high) decreases 30.5%. The
cache miss rate keeps 0.2%.
Link: https://lkml.kernel.org/r/20231016053002.756205-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20231016053002.756205-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is only one caller wants to dump the kill victim info, so just let
it call the standalone helper, no need to make the generic info dump
helper take an extra argument for that.
Result of bloat-o-meter:
./scripts/bloat-o-meter ./mm/oom_kill.old.o ./mm/oom_kill.o
add/remove: 0/0 grow/shrink: 1/2 up/down: 131/-142 (-11)
Function old new delta
oom_kill_process 412 543 +131
out_of_memory 1422 1418 -4
dump_header 562 424 -138
Total: Before=21514, After=21503, chg -0.05%
Link: https://lkml.kernel.org/r/20231016113103.86477-1-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Given large enough allocations and a machine with low enough memory (i.e a
default QEMU VM), it's entirely possible that
kmsan_init_alloc_meta_for_range's shadow+origin allocation fails.
Instead of eating a NULL deref kernel oops, check explicitly for
memblock_alloc() failure and panic with a nice error message.
Alexander Potapenko said:
For posterity, it is generally quite important for the allocated shadow
and origin to be contiguous, otherwise an unaligned memory write may
result in memory corruption (the corresponding unaligned shadow write will
be assuming that shadow pages are adjacent). So instead of panicking we
could have split the range into smaller ones until the allocation
succeeds, but that would've led to hard-to-debug problems in the future.
Link: https://lkml.kernel.org/r/20231016153446.132763-1-pedro.falcato@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With all users converted, remove the old create_empty_buffers() and rename
folio_create_empty_buffers() to create_empty_buffers().
Link: https://lkml.kernel.org/r/20231016201114.1928083-28-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both callers are now converted to ufs_get_locked_folio().
Link: https://lkml.kernel.org/r/20231016201114.1928083-27-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the locked_page argument to a folio, then use folios throughout.
Saves three hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-26-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the _page variants to call them. Saves a few hidden calls to
compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-24-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the incoming page to a folio and then use it throughout the
writeback path. This definitely isn't enough to support large folios, but
I don't expect reiserfs to gain support for those before it is removed.
Link: https://lkml.kernel.org/r/20231016201114.1928083-23-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the page argument to a folio and then use the folio APIs
throughout. Replaces three hidden calls to compound_head() with one
explicit one.
Link: https://lkml.kernel.org/r/20231016201114.1928083-22-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the folio API throughout, saving six hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-21-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert each element of the pages array to a folio before using it. This
in no way renders the function large-folio safe, but it does remove a lot
of hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-20-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The caller already has the folio, so pass it in and use the folio API
throughout saving five hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-18-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function was already using a folio, so this update to the new API
removes a single folio->page->folio conversion.
Link: https://lkml.kernel.org/r/20231016201114.1928083-17-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All users have now been converted to get_nth_block().
Link: https://lkml.kernel.org/r/20231016201114.1928083-16-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove a number of folio->page->folio conversions.
Link: https://lkml.kernel.org/r/20231016201114.1928083-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove a number of folio->page->folio conversions.
Link: https://lkml.kernel.org/r/20231016201114.1928083-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both callers already have a folio, so pass it in and use it directly.
Removes a lot of hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove a number of folio->page->folio conversions.
Link: https://lkml.kernel.org/r/20231016201114.1928083-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove a number of folio->page->folio conversions.
Link: https://lkml.kernel.org/r/20231016201114.1928083-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the folio APIs, saving four hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove several folio->page->folio conversions. Also use __GFP_NOFAIL
instead of calling yield() and the new get_nth_bh().
Link: https://lkml.kernel.org/r/20231016201114.1928083-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the folio APIs, removing numerous hidden calls to compound_head().
Also remove the stale comment about the page being looked up if it's NULL.
Link: https://lkml.kernel.org/r/20231016201114.1928083-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove an unnecessary folio->page->folio conversion and take advantage of
the new return value from folio_create_empty_buffers().
Link: https://lkml.kernel.org/r/20231016201114.1928083-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Finish the create_empty_buffers() transition", v2.
Pankaj recently added folio_create_empty_buffers() as the folio equivalent
to create_empty_buffers(). This patch set finishes the conversion by
first converting all remaining filesystems to call
folio_create_empty_buffers(), then renaming it back to
create_empty_buffers(). I took the opportunity to make a few
simplifications like making folio_create_empty_buffers() return the head
buffer and extracting get_nth_bh() from nilfs2.
A few of the patches in this series aren't directly related to
create_empty_buffers(), but I saw them while I was working on this and
thought they'd be easy enough to add to this series. Compile-tested only,
other than ext4.
This patch (of 26):
Almost all callers want to know the first BH that was allocated for this
folio. We already have that handy, so return it.
Link: https://lkml.kernel.org/r/20231016201114.1928083-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231016201114.1928083-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most function calls in hugetlb.c are made with folio arguments. This
brings hugetlb_vmemmap calls inline with them by using folio instead of
head struct page. Head struct page is still needed within these
functions.
The set/clear/test functions for hugepages are also changed to folio
versions.
Link: https://lkml.kernel.org/r/20231011144557.1720481-2-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the internal hugetlb restore vmemmap code path such that TLB
flushing can be batched. Use the existing mechanism of passing the
VMEMMAP_REMAP_NO_TLB_FLUSH flag to indicate flushing should not be
performed for individual pages. The routine
hugetlb_vmemmap_restore_folios is the only user of this new mechanism, and
it will perform a global flush after all vmemmap is restored.
Link: https://lkml.kernel.org/r/20231019023113.345257-9-mike.kravetz@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that a list of pages is deduplicated at once, the TLB flush can be
batched for all vmemmap pages that got remapped.
Expand the flags field value to pass whether to skip the TLB flush on
remap of the PTE.
The TLB flush is global as we don't have guarantees from caller that the
set of folios is contiguous, or to add complexity in composing a list of
kVAs to flush.
Modified by Mike Kravetz to perform TLB flush on single folio if an
error is encountered.
Link: https://lkml.kernel.org/r/20231019023113.345257-8-mike.kravetz@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In an effort to minimize amount of TLB flushes, batch all PMD splits
belonging to a range of pages in order to perform only 1 (global) TLB
flush.
Add a flags field to the walker and pass whether it's a bulk allocation or
just a single page to decide to remap. First value
(VMEMMAP_SPLIT_NO_TLB_FLUSH) designates the request to not do the TLB
flush when we split the PMD.
Rebased and updated by Mike Kravetz
Link: https://lkml.kernel.org/r/20231019023113.345257-7-mike.kravetz@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that batching of hugetlb vmemmap optimization processing is possible,
batch the freeing of vmemmap pages. When freeing vmemmap pages for a
hugetlb page, we add them to a list that is freed after the entire batch
has been processed.
This enhances the ability to return contiguous ranges of memory to the low
level allocators.
Link: https://lkml.kernel.org/r/20231019023113.345257-6-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The routine update_and_free_pages_bulk already performs vmemmap
restoration on the list of hugetlb pages in a separate step. In
preparation for more functionality to be added in this step, create a new
routine hugetlb_vmemmap_restore_folios() that will restore vmemmap for a
list of folios.
This new routine must provide sufficient feedback about errors and actual
restoration performed so that update_and_free_pages_bulk can perform
optimally.
Special care must be taken when encountering an error from
hugetlb_vmemmap_restore_folios. We want to continue making as much
forward progress as possible. A new routine bulk_vmemmap_restore_error
handles this specific situation.
Link: https://lkml.kernel.org/r/20231019023113.345257-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When adding hugetlb pages to the pool, we first create a list of the
allocated pages before adding to the pool. Pass this list of pages to a
new routine hugetlb_vmemmap_optimize_folios() for vmemmap optimization.
Due to significant differences in vmemmmap initialization for bootmem
allocated hugetlb pages, a new routine prep_and_add_bootmem_folios is
created.
We also modify the routine vmemmap_should_optimize() to check for pages
that are already optimized. There are code paths that might request
vmemmap optimization twice and we want to make sure this is not attempted.
Link: https://lkml.kernel.org/r/20231019023113.345257-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allocation of a hugetlb page for the hugetlb pool is done by the routine
alloc_pool_huge_page. This routine will allocate contiguous pages from a
low level allocator, prep the pages for usage as a hugetlb page and then
add the resulting hugetlb page to the pool.
In the 'prep' stage, optional vmemmap optimization is done. For
performance reasons we want to perform vmemmap optimization on multiple
hugetlb pages at once. To do this, restructure the hugetlb pool
allocation code such that vmemmap optimization can be isolated and later
batched.
The code to allocate hugetlb pages from bootmem was also modified to
allow batching.
No functional changes, only code restructure.
Link: https://lkml.kernel.org/r/20231019023113.345257-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If there is no memory allocation/freeing in the PCP (Per-CPU Pageset) of a
remote zone (zone in remote NUMA node) after some time (3 seconds for
now), the pages of the PCP of the remote zone will be drained to avoid
memory wastage.
This behavior was introduced in the commit 4ae7c03943 ("[PATCH]
Periodically drain non local pagesets") and the commit 4037d45220 ("Move
remote node draining out of slab allocators")
But, after the commit 7cc36bbddd ("vmstat: on-demand vmstat workers
V8"), the vmstat updater worker which is used to drain the PCP of remote
zones may not be re-queued when we are waiting for the timeout
(pcp->expire != 0) if there are no vmstat changes on this CPU, for
example, when the CPU goes idle or runs user space only workloads. This
may cause the pages of a remote zone be kept in PCP of this CPU for long
time. So that, the page reclaiming of the remote zone may be triggered
prematurely. This isn't a severe problem in practice, because the PCP of
the remote zone will be drained if some memory are allocated/freed again
on this CPU. And, the PCP will eventually be drained during the direct
reclaiming if necessary.
Anyway, the problem still deserves a fix via guaranteeing that the vmstat
updater worker will always be re-queued when we are waiting for the
timeout. In effect, this restores the original behavior before the commit
7cc36bbddd.
We can reproduce the bug via allocating/freeing pages from a remote zone
then go idle as follows. And the patch can fix it.
- Run some workloads, use `numactl` to bind CPU to node 0 and memory to
node 1. So the PCP of the CPU on node 0 for zone on node 1 will be
filled.
- After workloads finish, idle for 60s
- Check /proc/zoneinfo
With the original kernel, the number of pages in the PCP of the CPU on
node 0 for zone on node 1 is non-zero after idle. With the patched
kernel, it becomes 0 after idle. That is, we avoid to keep pages in the
remote PCP during idle.
Link: https://lkml.kernel.org/r/20231007062356.187621-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230811090819.60845-1-ying.huang@intel.com
Fixes: 7cc36bbddd ("vmstat: on-demand vmstat workers V8")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order for a F_SEAL_WRITE sealed memfd mapping to have an opportunity to
clear VM_MAYWRITE, we must be able to invoke the appropriate
vm_ops->mmap() handler to do so. We would otherwise fail the
mapping_map_writable() check before we had the opportunity to avoid it.
This patch moves this check after the call_mmap() invocation. Only memfd
actively denies write access causing a potential failure here (in
memfd_add_seals()), so there should be no impact on non-memfd cases.
This patch makes the userland-visible change that MAP_SHARED, PROT_READ
mappings of an F_SEAL_WRITE sealed memfd mapping will now succeed.
There is a delicate situation with cleanup paths assuming that a writable
mapping must have occurred in circumstances where it may now not have. In
order to ensure we do not accidentally mark a writable file unwritable by
mistake, we explicitly track whether we have a writable mapping and unmap
only if we do.
[lstoakes@gmail.com: do not set writable_file_mapping in inappropriate case]
Link: https://lkml.kernel.org/r/c9eb4cc6-7db4-4c2b-838d-43a0b319a4f0@lucifer.local
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217238
Link: https://lkml.kernel.org/r/55e413d20678a1bb4c7cce889062bbb07b0df892.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The seal_check_future_write() function is called by shmem_mmap() or
hugetlbfs_file_mmap() to disallow any future writable mappings of an memfd
sealed this way.
The F_SEAL_WRITE flag is not checked here, as that is handled via the
mapping->i_mmap_writable mechanism and so any attempt at a mapping would
fail before this could be run.
However we intend to change this, meaning this check can be performed for
F_SEAL_WRITE mappings also.
The logic here is equally applicable to both flags, so update this
function to accommodate both and rename it accordingly.
Link: https://lkml.kernel.org/r/913628168ce6cce77df7d13a63970bae06a526e0.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "permit write-sealed memfd read-only shared mappings", v4.
The man page for fcntl() describing memfd file seals states the following
about F_SEAL_WRITE:-
Furthermore, trying to create new shared, writable memory-mappings via
mmap(2) will also fail with EPERM.
With emphasis on 'writable'. In turns out in fact that currently the
kernel simply disallows all new shared memory mappings for a memfd with
F_SEAL_WRITE applied, rendering this documentation inaccurate.
This matters because users are therefore unable to obtain a shared mapping
to a memfd after write sealing altogether, which limits their usefulness.
This was reported in the discussion thread [1] originating from a bug
report [2].
This is a product of both using the struct address_space->i_mmap_writable
atomic counter to determine whether writing may be permitted, and the
kernel adjusting this counter when any VM_SHARED mapping is performed and
more generally implicitly assuming VM_SHARED implies writable.
It seems sensible that we should only update this mapping if VM_MAYWRITE
is specified, i.e. whether it is possible that this mapping could at any
point be written to.
If we do so then all we need to do to permit write seals to function as
documented is to clear VM_MAYWRITE when mapping read-only. It turns out
this functionality already exists for F_SEAL_FUTURE_WRITE - we can
therefore simply adapt this logic to do the same for F_SEAL_WRITE.
We then hit a chicken and egg situation in mmap_region() where the check
for VM_MAYWRITE occurs before we are able to clear this flag. To work
around this, perform this check after we invoke call_mmap(), with careful
consideration of error paths.
Thanks to Andy Lutomirski for the suggestion!
[1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/
[2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238
This patch (of 3):
There is a general assumption that VMAs with the VM_SHARED flag set are
writable. If the VM_MAYWRITE flag is not set, then this is simply not the
case.
Update those checks which affect the struct address_space->i_mmap_writable
field to explicitly test for this by introducing
[vma_]is_shared_maywrite() helper functions.
This remains entirely conservative, as the lack of VM_MAYWRITE guarantees
that the VMA cannot be written to.
Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The documentation says DAMOS tried regions update feature of DAMON sysfs
interface is doing the update for one aggregation interval after the
request is made. Since the introduction of the per-scheme apply interval,
that behavior makes no much sense. Hence the implementation has changed
to update the regions for each scheme for only its apply interval.
Further update the document to reflect the real behavior.
Link: https://lkml.kernel.org/r/20231012192256.33556-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
