Add callbacks
=============
.selftest_check: returns true for flash selftest.
.selftest_run: runs a flash selftest.
Also, refactor NVM APIs so that they can be
used with devlink and ethtool both.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a framework for running selftests.
Framework exposes devlink commands and test suite(s) to the user
to execute and query the supported tests by the driver.
Below are new entries in devlink_nl_ops
devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported
selftests by the drivers.
devlink_nl_cmd_selftests_run: To execute selftests. Users can
provide a test mask for executing group tests or standalone tests.
Documentation/networking/devlink/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5e use TLS TX pool to improve connection rate
To offload encryption operations, the mlx5 device maintains state and
keeps track of every kTLS device-offloaded connection. Two HW objects
are used per TX context of a kTLS offloaded connection: a. Transport
interface send (TIS) object, to reach the HW context. b. Data Encryption
Key (DEK) to perform the crypto operations.
These two objects are created and destroyed per TLS TX context, via FW
commands. In total, 4 FW commands are issued per TLS TX context, which
seriously limits the connection rate.
In this series, we aim to save creation and destroy of TIS objects by
recycling them. Upon recycling of a TIS, the HW still needs to be
notified for the re-mapping between a TIS and a context. This is done by
posting WQEs via an SQ, significantly faster API than the FW command
interface.
A pool is used for recycling. The pool dynamically interacts to the load
and connection rate, growing and shrinking accordingly.
Saving the TIS FW commands per context increases connection rate by ~42%,
from 11.6K to 16.5K connections per sec.
Connection rate is still limited by FW bottleneck due to the remaining
per context FW commands (DEK create/destroy). This will soon be addressed
in a followup series. By combining the two series, the FW bottleneck
will be released, and a significantly higher (about 100K connections per
sec) kTLS TX device-offloaded connection rate is reached.
====================
Link: https://lore.kernel.org/r/20220727094346.10540-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let the TLS TX recycle pool be more flexible in size, by continuously
and dynamically allocating and releasing HW resources in response to
changes in the connections rate and load.
Allocate and release pool entries in bulks (16). Use a workqueue to
release/allocate in the background. Allocate a new bulk when the pool
size goes lower than the low threshold (1K). Symmetric operation is done
when the pool size gets greater than the upper threshold (4K).
Every idle pool entry holds: 1 TIS, 1 DEK (HW resources), in addition to
~100 bytes in host memory.
Start with an empty pool to minimize memory and HW resources waste for
non-TLS users that have the device-offload TLS enabled.
Upon a new request, in case the pool is empty, do not wait for a whole bulk
allocation to complete. Instead, trigger an instant allocation of a single
resource to reduce latency.
Performance tests:
Before: 11,684 CPS
After: 16,556 CPS
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The transport interface send (TIS) object is responsible for performing
all transport related operations of the transmit side. The ConnectX HW
uses a TIS object to save and access the TLS crypto information and state
of an offloaded TX kTLS connection.
Before this patch, we used to create a new TIS per connection and destroy
it once it’s closed. Every create and destroy of a TIS is a FW command.
Same applies for the private TLS context, where we used to dynamically
allocate and free it per connection.
Resources recycling reduce the impact of the allocation/free operations
and helps speeding up the connection rate.
In this feature we maintain a pool of TX objects and use it to recycle
the resources instead of re-creating them per connection.
A cached TIS popped from the pool is updated to serve the new connection
via the fast-path HW interface, updating the tls static and progress
params. This is a very fast operation, significantly faster than FW
commands.
On recycling, a WQE fence is required after the context params change.
This guarantees that the data is sent after the context has been
successfully updated in hardware, and that the context modification
doesn't interfere with existing traffic.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let the caller of mlx5e_ktls_tx_handle_ooo() take care of updating the
stats, according to the returned value. As the switch/case blocks are
already there, this change saves unnecessary branches in the handler.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS TIS objects have a defined role in mapping and reaching the HW TLS
contexts. Some standard TIS attributes (like LAG port affinity) are
not relevant for them.
Use a dedicated TLS TIS create function instead of the generic
mlx5e_create_tis.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multiple TLS device-offloaded contexts can be added in parallel via
concurrent calls to .tls_dev_add, while calls to .tls_dev_del are
sequential in tls_device_gc_task.
This is not a sustainable behavior. This creates a rate gap between add
and del operations (addition rate outperforms the deletion rate). When
running for enough time, the TLS device resources could get exhausted,
failing to offload new connections.
Replace the single-threaded garbage collector work with a per-context
alternative, so they can be handled on several cores in parallel. Use
a new dedicated destruct workqueue for this.
Tested with mlx5 device:
Before: 22141 add/sec, 103 del/sec
After: 11684 add/sec, 11684 del/sec
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS context destructor can be run in atomic context. Cleanup operations
for device-offloaded contexts could require access and interaction with
the device callbacks, which might sleep. Hence, the cleanup of such
contexts must be deferred and completed inside an async work.
For all others, this is not necessary, as cleanup is atomic. Invoke
cleanup immediately for them, avoiding queueing redundant gc work.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return from the call to tls_rx_msg_size() is int, it can be
a negative error code, however this is being assigned to an
unsigned long variable 'sz', so making 'sz' an int.
Eliminate the following coccicheck warning:
./net/tls/tls_strp.c:211:6-8: WARNING: Unsigned expression compared with zero: sz < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220728031019.32838-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tls: rx: follow ups to rx work
A selection of unrelated changes. First some selftest polishing.
Next a change to rcvtimeo handling for locking based on an exchange
with Eric. Follow up to Paolo's comments from yesterday. Last but
not least a fix to a false positive warning, turns out I've been
testing with DEBUG_NET=n this whole time.
====================
Link: https://lore.kernel.org/r/20220727031524.358216-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I went too far in the accessor conversion, we can't use tls_strp_msg()
after decryption because the message may not be ready. What we care
about on this path is that the output skb is detached, i.e. we didn't
somehow just turn around and used the input skb with its TCP data
still attached. So look at the anchor directly.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo points out that there seems to be no strong reason strparser
users a single threaded workqueue. Perhaps there were some performance
or pinning considerations? Since we don't know (and it's the slow path)
let's default to the most natural, multi-threaded choice.
Also rename the workqueue to "tls-".
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric indicates that restarting rcvtimeo on every wait may be fine.
I thought that we should consider it cumulative, and made
tls_rx_reader_lock() return the remaining timeo after acquiring
the reader lock.
tls_rx_rec_wait() gets its timeout passed in by value so it
does not keep track of time previously spent.
Make the lock waiting consistent with tls_rx_rec_wait() - don't
keep track of time spent.
Read the timeo fresh in tls_rx_rec_wait().
It's unclear to me why callers are supposed to cache the value.
Link: https://lore.kernel.org/all/CANn89iKcmSfWgvZjzNGbsrndmCch2HC_EPZ7qmGboDNaWoviNQ@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a handful of memory randomizations and precise length checks.
Nothing is really broken here, I did this to increase confidence
when debugging. It does fix a GCC warning, tho. Apparently GCC
recognizes that memory needs to be initialized for send() but
does not recognize that for write().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
for the release.
Current release - regressions:
- wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop(),
fix taking the lock before its initialized
- Bluetooth: mgmt: fix double free on error path
Current release - new code bugs:
- eth: ice: fix tunnel checksum offload with fragmented traffic
Previous releases - regressions:
- tcp: md5: fix IPv4-mapped support after refactoring, don't take
the pure v6 path
- Revert "tcp: change pingpong threshold to 3", improving detection
of interactive sessions
- mld: fix netdev refcount leak in mld_{query | report}_work() due
to a race
- Bluetooth:
- always set event mask on suspend, avoid early wake ups
- L2CAP: fix use-after-free caused by l2cap_chan_put
- bridge: do not send empty IFLA_AF_SPEC attribute
Previous releases - always broken:
- ping6: fix memleak in ipv6_renew_options()
- sctp: prevent null-deref caused by over-eager error paths
- virtio-net: fix the race between refill work and close,
resulting in NAPI scheduled after close and a BUG()
- macsec:
- fix three netlink parsing bugs
- avoid breaking the device state on invalid change requests
- fix a memleak in another error path
Misc:
- dt-bindings: net: ethernet-controller: rework 'fixed-link' schema
- two more batches of sysctl data race adornment
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xnan
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter, no known blockers for
the release.
Current release - regressions:
- wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop(), fix
taking the lock before its initialized
- Bluetooth: mgmt: fix double free on error path
Current release - new code bugs:
- eth: ice: fix tunnel checksum offload with fragmented traffic
Previous releases - regressions:
- tcp: md5: fix IPv4-mapped support after refactoring, don't take the
pure v6 path
- Revert "tcp: change pingpong threshold to 3", improving detection
of interactive sessions
- mld: fix netdev refcount leak in mld_{query | report}_work() due to
a race
- Bluetooth:
- always set event mask on suspend, avoid early wake ups
- L2CAP: fix use-after-free caused by l2cap_chan_put
- bridge: do not send empty IFLA_AF_SPEC attribute
Previous releases - always broken:
- ping6: fix memleak in ipv6_renew_options()
- sctp: prevent null-deref caused by over-eager error paths
- virtio-net: fix the race between refill work and close, resulting
in NAPI scheduled after close and a BUG()
- macsec:
- fix three netlink parsing bugs
- avoid breaking the device state on invalid change requests
- fix a memleak in another error path
Misc:
- dt-bindings: net: ethernet-controller: rework 'fixed-link' schema
- two more batches of sysctl data race adornment"
* tag 'net-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
stmmac: dwmac-mediatek: fix resource leak in probe
ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr
net: ping6: Fix memleak in ipv6_renew_options().
net/funeth: Fix fun_xdp_tx() and XDP packet reclaim
sctp: leave the err path free in sctp_stream_init to sctp_stream_free
sfc: disable softirqs for ptp TX
ptp: ocp: Select CRC16 in the Kconfig.
tcp: md5: fix IPv4-mapped support
virtio-net: fix the race between refill work and close
mptcp: Do not return EINPROGRESS when subflow creation succeeds
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put
Bluetooth: Always set event mask on suspend
Bluetooth: mgmt: Fix double free on error path
wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop()
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
netfilter: nft_queue: only allow supported familes and hooks
...
If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt()
before returning. Otherwise it is a resource leak.
Fixes: fa4b3ca60e ("stmmac: dwmac-mediatek: fix clock issue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
device while matching route. That may trigger null-ptr-deref bug
for ip6_ptr probability as following.
=========================================================
BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263
CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
dump_backtrace+0x1a8/0x230
show_stack+0x20/0x70
dump_stack_lvl+0x68/0x84
print_report+0xc4/0x120
kasan_report+0x84/0x120
__asan_load4+0x94/0xd0
find_match.part.0+0x70/0x134
__find_rr_leaf+0x408/0x470
fib6_table_lookup+0x264/0x540
ip6_pol_route+0xf4/0x260
ip6_pol_route_output+0x58/0x70
fib6_rule_lookup+0x1a8/0x330
ip6_route_output_flags_noref+0xd8/0x1a0
ip6_route_output_flags+0x58/0x160
ip6_dst_lookup_tail+0x5b4/0x85c
ip6_dst_lookup_flow+0x98/0x120
rawv6_sendmsg+0x49c/0xc70
inet_sendmsg+0x68/0x94
Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
$ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
$ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
$ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1
Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done
$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done
It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly,
then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check.
cpu0 cpu1
fib6_table_lookup
__find_rr_leaf
addrconf_notify [ NETDEV_CHANGEMTU ]
addrconf_ifdown
RCU_INIT_POINTER(dev->ip6_ptr, NULL)
find_match
ip6_ignore_linkdown
So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to
fix the null-ptr-deref bug.
Fixes: dcd1f57295 ("net/ipv6: Remove fib6_idev")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we close ping6 sockets, some resources are left unfreed because
pingv6_prot is missing sk->sk_prot->destroy(). As reported by
syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.
struct ipv6_sr_hdr *hdr;
char data[24] = {0};
int fd;
hdr = (struct ipv6_sr_hdr *)data;
hdr->hdrlen = 2;
hdr->type = IPV6_SRCRT_TYPE_4;
fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
close(fd);
To fix memory leaks, let's add a destroy function.
Note the socket() syscall checks if the GID is within the range of
net.ipv4.ping_group_range. The default value is [1, 0] so that no
GID meets the condition (1 <= GID <= 0). Thus, the local DoS does
not succeed until we change the default value. However, at least
Ubuntu/Fedora/RHEL loosen it.
$ cat /usr/lib/sysctl.d/50-default.conf
...
-net.ipv4.ping_group_range = 0 2147483647
Also, there could be another path reported with these options, and
some of them require CAP_NET_RAW.
setsockopt
IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
IPV6_HOPOPTS (inet6_sk(sk)->opt)
IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
IPV6_RTHDR (inet6_sk(sk)->opt)
IPV6_DSTOPTS (inet6_sk(sk)->opt)
IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)
getsockopt
IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)
For the record, I left a different splat with syzbot's one.
unreferenced object 0xffff888006270c60 (size 96):
comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
hex dump (first 32 bytes):
01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 ....D...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
[<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
[<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
[<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
[<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
[<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176
Fixes: 6d0bfe2261 ("net: ipv6: Add IPv6 support to the ping socket.")
Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a watch is being added to a queue, it needs to guard against
interference from addition of a new watch, manual removal of a watch and
removal of a watch due to some other queue being destroyed.
KEYCTL_WATCH_KEY guards against this for the same {key,queue} pair by
holding the key->sem writelocked and by holding refs on both the key and
the queue - but that doesn't prevent interaction from other {key,queue}
pairs.
While add_watch_to_object() does take the spinlock on the event queue,
it doesn't take the lock on the source's watch list. The assumption was
that the caller would prevent that (say by taking key->sem) - but that
doesn't prevent interference from the destruction of another queue.
Fix this by locking the watcher list in add_watch_to_object().
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: syzbot+03d7b43290037d1f87ca@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: keyrings@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since __post_watch_notification() walks wlist->watchers with only the
RCU read lock held, we need to use RCU methods to add to the list (we
already use RCU methods to remove from the list).
Fix add_watch_to_object() to use hlist_add_head_rcu() instead of
hlist_add_head() for that list.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use correct vendor for Xilinx versions of Cadence MACB/GEM Ethernet
controller. The Versal compatible was not released, so it can be
changed. Zynq-7xxx and Ultrascale+ has to be kept in new and deprecated
form.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/20220726070802.26579-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use correct vendor for Xilinx versions of Cadence MACB/GEM Ethernet
controller. The Versal compatible was not released, so it can be
changed. Zynq-7xxx and Ultrascale+ has to be kept in new and deprecated
form.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726070802.26579-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current implementation of fun_xdp_tx(), used for XPD_TX, is
incorrect in that it takes an address/length pair and later releases it
with page_frag_free(). It is OK for XDP_TX but the same code is used by
ndo_xdp_xmit. In that case it loses the XDP memory type and releases the
packet incorrectly for some of the types. Assorted breakage follows.
Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in
reclaim.
Fixes: db37bc177d ("net/funeth: add the data path")
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
ice: PPPoE offload support
Marcin Szycik says:
Add support for dissecting PPPoE and PPP-specific fields in flow dissector:
PPPoE session id and PPP protocol type. Add support for those fields in
tc-flower and support offloading PPPoE. Finally, add support for hardware
offload of PPPoE packets in switchdev mode in ice driver.
Example filter:
tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \
1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to use the new fields (will be submitted
soon).
ICE COMMS DDP package is required to create a filter in ice.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add support for PPPoE hardware offload
flow_offload: Introduce flow_match_pppoe
net/sched: flower: Add PPPoE filter
flow_dissector: Add PPPoE dissectors
====================
Link: https://lore.kernel.org/r/20220726203133.2171332-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 35d099da41, reversing
changes made to 58d8bcd47e.
I wrongly applied that to the net-next tree instead of the intended
target tree (net). Reverting it on net-next.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 3c783b83bd ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
stopped relying on SPEED_MAX constant and hardcoded speed settings
for the switch ports and rely on phylink configuration.
It turned out, however, that when the relevant code is called,
the mac_capabilites of CPU/DSA port remain unset.
mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
dsa_tree_setup_switches(), which precedes setting the caps in
phylink_get_caps down in the chain of dsa_tree_setup_ports().
As a result the mac_capabilites are 0 and the default speed for CPU/DSA
port is 10M at the start. To fix that, execute mv88e6xxx_get_caps()
and obtain the capabilities driectly.
Fixes: 3c783b83bd ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220726230918.2772378-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-26
This series contains updates to ice driver only.
Przemyslaw corrects accounting for VF VLANs to allow for correct number
of VLANs for untrusted VF. He also correct issue with checksum offload
on VXLAN tunnels.
Ani allows for two VSIs to share the same MAC address.
Maciej corrects checked bits for descriptor completion of loopback
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
====================
Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The net_eq() check is already performed inside
devlinks_xa_for_each_registered_get() helper, so remove the redundant
appearance.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220727055912.568391-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Absolute path to other DT schema is preferred over relative one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115650.100726-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A NULL pointer dereference was reported by Wei Chen:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__list_del_entry_valid+0x26/0x80
Call Trace:
<TASK>
sctp_sched_dequeue_common+0x1c/0x90
sctp_sched_prio_dequeue+0x67/0x80
__sctp_outq_teardown+0x299/0x380
sctp_outq_free+0x15/0x20
sctp_association_free+0xc3/0x440
sctp_do_sm+0x1ca7/0x2210
sctp_assoc_bh_rcv+0x1f6/0x340
This happens when calling sctp_sendmsg without connecting to server first.
In this case, a data chunk already queues up in send queue of client side
when processing the INIT_ACK from server in sctp_process_init() where it
calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in
all stream_out will be freed in sctp_stream_init's err path. Then in the
asoc freeing it will crash when dequeuing this data chunk as stream_out
is missing.
As we can't free stream out before dequeuing all data from send queue, and
this patch is to fix it by moving the err path stream_out/in freeing in
sctp_stream_init() to sctp_stream_free() which is eventually called when
freeing the asoc in sctp_association_free(). This fix also makes the code
in sctp_process_init() more clear.
Note that in sctp_association_init() when it fails in sctp_stream_init(),
sctp_association_free() will not be called, and in that case it should
go to 'stream_free' err path to free stream instead of 'fail_init'.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:
1) The invoked code is always executed with softirqs disabled for non
PTP packets.
2) Better if a ptp packet transmission is not interrupted by softirq
handling which could lead to high latencies.
3) netdev_xmit_more used by the TX code requires preemption to be
disabled.
Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.
Fixes: f79c957a0b ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The crc16() function is used to check the firmware validity, but
the library was not explicitly selected.
Fixes: 3c3673bde5 ("ptp: ocp: Add firmware header checks")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Vadim Fedorenko <vadfed@fb.com>
Link: https://lore.kernel.org/r/20220726220604.1339972-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the blamed commit, IPv4 SYN packets handled
by a dual stack IPv6 socket are dropped, even if
perfectly valid.
$ nstat | grep MD5
TcpExtTCPMD5Failure 5 0.0
For a dual stack listener, an incoming IPv4 SYN packet
would call tcp_inbound_md5_hash() with @family == AF_INET,
while tp->af_specific is pointing to tcp_sock_ipv6_specific.
Only later when an IPv4-mapped child is created, tp->af_specific
is changed to tcp_sock_ipv6_mapped_specific.
Fixes: 7bbb765b73 ("net/tcp: Merge TCP-MD5 inbound callbacks")
Reported-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/r/20220726115743.2759832-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two more bug fixes for asm-generic, one addressing an incorrect
Kconfig symbol reference and another one fixing a build failure
for the perf tool on mips and possibly others.
-----BEGIN PGP SIGNATURE-----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=2fva
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"Two more bug fixes for asm-generic, one addressing an incorrect
Kconfig symbol reference and another one fixing a build failure for
the perf tool on mips and possibly others"
* tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: remove a broken and needless ifdef conditional
tools: Fixed MIPS builds due to struct flock re-definition
One last set of changes for the soc tree:
- fix clock frequency on lan966x
- fix incorrect GPIO numbers on some pxa machines
- update Baolin's email address
-----BEGIN PGP SIGNATURE-----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=n1qH
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of changes for the soc tree:
- fix clock frequency on lan966x
- fix incorrect GPIO numbers on some pxa machines
- update Baolin's email address"
* tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa2xx: Fix GPIO descriptor tables
mailmap: update Baolin Wang's email
ARM: dts: lan966x: fix sys_clk frequency
Wenjia Zhang says:
====================
net/smc: updates 2022-07-25
please apply the following patches to netdev's net-next tree.
These patches do some preparation to make ISM available for uses beyond
SMC-D, and a bunch of cleanups.
v2: add "Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, the smc and smc_diag modules were automatically loaded as
dependencies of the ism module whenever an ISM device was present.
With the pending rework of the ISM API, the smc module will no longer
automatically be loaded in presence of an ISM device. Usage of an AF_SMC
socket will still trigger loading of the smc modules, but usage of a
netlink socket will not.
This is addressed by setting the correct module aliases.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the DMBE bits, which are passed on individually in ism_move() as
parameter idx, available to the receiver.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reworked signature of the function to retrieve the system EID: No plausible
reason to use a double pointer. And neither to pass in the device as an
argument, as this identifier is by definition per system, not per device.
Plus some minor consistency edits.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This struct is used in a single place only, and its usage generates
inefficient code. Time to clean up!
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-and-tested-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We try using cancel_delayed_work_sync() to prevent the work from
enabling NAPI. This is insufficient since we don't disable the source
of the refill work scheduling. This means an NAPI poll callback after
cancel_delayed_work_sync() can schedule the refill work then can
re-enable the NAPI that leads to use-after-free [1].
Since the work can enable NAPI, we can't simply disable NAPI before
calling cancel_delayed_work_sync(). So fix this by introducing a
dedicated boolean to control whether or not the work could be
scheduled from NAPI.
[1]
==================================================================
BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42
CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0xbb/0x6ac
? _printk+0xad/0xde
? refill_work+0x43/0xd4
kasan_report+0xa8/0x130
? refill_work+0x43/0xd4
refill_work+0x43/0xd4
process_one_work+0x43d/0x780
worker_thread+0x2a0/0x6f0
? process_one_work+0x780/0x780
kthread+0x167/0x1a0
? kthread_exit+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
...
Fixes: b2baed69e6 ("virtio_net: set/cancel work on ndo_open/ndo_stop")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Ramadoss says:
====================
net: dsa: microchip: add support for phylink mac config and link up
This patch series add support common phylink mac config and link up for the ksz
series switches. At present, ksz8795 and ksz9477 doesn't implement the phylink
mac config and link up. It configures the mac interface in the port setup hook.
ksz8830 series switch does not mac link configuration. For lan937x switches, in
the part support patch series has support only for MII and RMII configuration.
Some group of switches have some register address and bit fields common and
others are different. So, this patch aims to have common phylink implementation
which configures the register based on the chip id.
Changes in v2
- combined the modification of duplex, tx_pause and rx_pause into single
function.
Changes in v1
- Squash the reading rgmii value from dt to patch which apply the rgmii value
- Created the new function ksz_port_set_xmii_speed
- Seperated the namespace values for xmii_ctrl_0 and xmii_ctrl_1 register
- Applied the rgmii delay value based on the rx/tx-internal-delay-ps
====================
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add support for phylink mac config for ksz series of
switches. All the files ksz8795, ksz9477 and lan937x uses the ksz common
xmii function. Instead of calling from the individual files, it is moved
to the ksz common phylink mac config function.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the ksz8795 cpu configuration to use the ksz common
xmii set functions.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ksz9477.c file, configuring the xmii register is performed based on
the flag NEW_XMII. The flag is reset for ksz9893 switch and set for
other switch. This patch uses the ksz common xmii set and get function.
The bit values are configured based on the chip id.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
