This isn't actually an error condition, this just indicates a normal
shutdown - no reason for these to be in the log.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_iter_peek_upto() in snapshots mode may need to keep a
btree_path for the insert position, not just the position of the key
we're returning. The code was incorrectly assuming this would be in the
same btree node - we were missing a bch2_btree_path_traverse() call.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_journal_keys_peek_upto() was comparing against btree_id & level
incorrectly - fix this by using __journal_key_cmp().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a (harmless) broken invariant in __bch2_btree_path_set_pos():
iterators to interior nodes should point to the first non whiteout.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This just cleans up and simplifies the code that decides where to resume
writing in the journal - when the code was originally written we weren't
saving the precise location of every journal write found.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
On startup, we need to ensure the first journal entry written is a flush
write: after a clean shutdown we generally don't read the journal, which
means we might be overwriting whatever was there previously, and there
must always be at least one flush entry in the journal or recovery will
fail.
Found by fstests generic/388.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This tweaks the recovery and journal paths so that we don't error out
before we need to: the list_journal command should work, even if we
wouldn't be able to replay successfully.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We weren't setting path->uptodate before calling
bch2_btree_key_cache_fill() - which causes __bch2_btree_path_upgrade()
to fail.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This switches btree_key_cache_fill() to use a btree iterator, not a
btree path, so that it can search for keys in previous snapshots.
We also add another iterator flag, BTREE_ITER_KEY_CACHE_FILL, to avoid
recursion back into the key cache.
This will allow us to re-enable the key cache for inodes in the next
patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There was no reason for this to be a separate helper - we always want
the relock call that btree_trans_peek_key_cache() did.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we start using the key cache for inodes again, it'll be possible
for bch2_btree_path_peek_slot() to return a key in a different snapshot
with a key cache path.
This isn't what we want when triggers are checking what they're
overwriting, so introduce a new helper for the commit path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch introduces
- bpos_eq()
- bpos_lt()
- bpos_le()
- bpos_gt()
- bpos_ge()
and equivalent replacements for bkey_cmp().
Looking at the generated assembly these could probably be improved
further, but we already see a significant code size improvement with
this patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new bcachefs-specific magic number for the superblock, instead of
continuing to use the old bcache magic number3
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Extent overwrite used to be handled differently, underneath the
journaling layer and within the core btree code. This imposed
restrictions on bkey packing/packed formats, which no longer apply.
This patch deletes those restrictions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Ensure we print an error message if necessary.
Ideally we'd return the precise error code to userspace and leave
printing the error message to the userspace tool, but we haven't
decided to make our private error codes ABI-stable yet.
- Return standard error code to userspace
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Btree nodes shouldn't have their accessed bit set when entering the
btree cache by being read in from disk - this fixes linear scans
thrashing the cache.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Move the actual slowpath off into a new function -
bch2_time_stats_clear_buffer() - and inline
bch2_time_stats_update_one().
Alo, use the new inlined update functions from mean_and_variance.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When flags & btree_id are constants, we can constant fold the entire
calculation of the actual iterator flags - and the whole thing becomes
small enough to inline.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This drops some unneeded references to JOURNAL_REPLAY_DONE in c->flags:
we're already mirroring it in btree_trans, we just weren't using it
consistently.
We may want to do this with more flags:
btree_iter.c: unsigned nr = test_bit(BCH_FS_STARTED, &c->flags)
btree_update_leaf.c: if (unlikely(!test_bit(BCH_FS_MAY_GO_RW, &c->flags))) {
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It turns out the *_defined entries of bch_io_opts are only used in one
place - in the xattr get path - and there we immediately convert to a
bch_opts struct, which also has the *_defined entries.
This patch changes bch2_inode_opts_to_opts() to go directly from
bch_inode_unpacked to bch_opts, which is a minor simplification and will
also let us slim down struct bch_io_opts in another patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This provides an inlined version of bch2_subvolume_get() and uses it in
bch2_subvolume_get_snapshot(), since this is the version that's used all
over the place and in fast paths (e.g. IO paths).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is only called in two places, and when it's used we use it in a
tight loop - it's definitely worth inlining.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This just removes a redundant comparison - there's more work we could do
here to remove some redundant copying.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Standard splitting out of the slow path from the fast path of a
function. We may follow this up in another patch with inlining the fast
path into btree_iter.c.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If the last journal write didn't complete sucessfully due to a torn
write, we'll detect it as a checksum error. In that case, we should just
pretend that journal entry was never written.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Print out the journal entries we read and will replay as soon as
possible - if we get an error walidating keys it's helpful to know where
it was in the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It turns out we need bch2_extent_trim_atomi() even when we're deleting
extents one at a time because it's possible for one reflink_p to
reference arbitrarily many reflink_v extents. This doesn't normally
happen, but the data move path can fragment existing extents in the
background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
b->write_type needs to be set atomically with setting the
btree_node_need_write flag, so move it into b->flags.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Centralize format strings in bcachefs.h
- Add bch2_fmt_inum_offset() and related helpers
- Switch error messages for inodes to also print out the offset, in
bytes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Warnings ought to always have a format string/log message - makes them
considerably more useful.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, when we exited from the loop body with a break statement
_ret wouldn't have been assigned to yet, and we could spuriously return
a transaction restart error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This improves the bkey_format calculation when splitting btree nodes.
Previously, we'd use a format calculated for the original node for the
lower of the two new nodes.
This was particularly bad on sequential insertions, where we iteratively
split the last btree node, whos format has to include KEY_MAX.
Now, we calculate formats precisely for the keys the two new nodes will
contain. This also should make splitting a bit more efficient, since
we're only copying keys once (from the original node to the new node,
instead of new node, replacement node, then upper split).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This switches where we take quota reservations to be per bch_wirte_op
instead of per dio_write, so we can drop the quota reservation in the
same place as we call i_sectors_acct(), and only take/release
ei_quota_lock once.
In the future we'd like ei_quota_lock to not be a mutex, so that we can
avoid punting to process context before deliving write completions in
nocow mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The genradix code can handle multiple threads trying to allocate at the
same time - we don't need the genradix_ptr_alloc() call to happen under
a lock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a regression from percpu freedlists in the btree key cache
code: in a rare error path, we were immediately freeing a bkey_cached
that had been used before and should've waited for an SRCU barrier.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
These were wrappers around atomic operations that verified that the
counter wasn't negative, but they're dead code - delete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Marking a non-static function as inline doesn't actually work and is
now causing problems - drop that
- Introduce BCACHEFS_LOG_PREFIX for when we want to prefix log messages
with bcachefs (filesystem name)
- Userspace doesn't have real percpu variables (maybe we can get this
fixed someday), put an #ifdef around bch2_disk_reservation_add()
fastpath
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We have a unique lock used for controlling adding to the pagecache: the
lock has two states, where both states are shared - the lock may be held
multiple times for either state - but not both states at the same time.
This is exactly what we need for nocow mode locking, so this patch pulls
it out of fs.c into its own file.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
BCH_WRITE_FLUSH is a write flag that causes a journal flush. It's only
used in the direct IO path, and this will allow for some consolidation
with the regular fsync path, which will help with the upcoming nocow
mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- factor out more slowpath code into non-inline function
- use bch2_print_string_as_lines(), so our error message doesn't get
truncated
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_path_copy() doesn't need to call
bch2_btree_path_check_sort_fast() - the newly allocated path will always
be in the correct position, post copy; also delete some redundant
branches from __bch2_btree_path_make_mut().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
