commit 000bca8d70 upstream.
These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.
This fixes commit 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.
Fixes: 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5a36720c3 upstream.
The introduction of support for Apple board types inadvertently changed
the precedence order, causing hybrid SMBIOS+DT platforms to look up the
firmware using the DMI information instead of the device tree compatible
to generate the board type. Revert back to the old behavior,
as affected platforms use firmwares named after the DT compatible.
Fixes: 7682de8b33 ("wifi: brcmfmac: of: Fetch Apple properties")
[1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
Cc: stable@vger.kernel.org
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2337a40e0 upstream.
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org>
Fixes: 99feaa717e ("s390/kexec_file: Create ipl report and pass to next kernel")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf129830ee upstream.
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae9dcb91c6 upstream.
Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit
(ATSFC) to clear. This is to ensure no residue fifo value is being read
erroneously.
Fixes: f4da56529d ("net: stmmac: Add support for external trigger timestamping")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f64e4275ef upstream.
The Dell Latitude E6430 both with and without the optional NVidia dGPU
has a bug in its ACPI tables which is causing Linux to assign the wrong
ACPI fwnode / companion to the pci_device for the i915 iGPU.
Specifically under the PCI root bridge there are these 2 ACPI Device()s :
Scope (_SB.PCI0)
{
Device (GFX0)
{
Name (_ADR, 0x00020000) // _ADR: Address
}
...
Device (VID)
{
Name (_ADR, 0x00020000) // _ADR: Address
...
Method (_DOS, 1, NotSerialized) // _DOS: Disable Output Switching
{
VDP8 = Arg0
VDP1 (One, VDP8)
}
Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices
{
...
}
...
}
}
The non-functional GFX0 ACPI device is a problem, because this gets
returned as ACPI companion-device by acpi_find_child_device() for the iGPU.
This is a long standing problem and the i915 driver does use the ACPI
companion for some things, but works fine without it.
However since commit 63f534b8ba ("ACPI: PCI: Rework acpi_get_pci_dev()")
acpi_get_pci_dev() relies on the physical-node pointer in the acpi_device
and that is set on the wrong acpi_device because of the wrong
acpi_find_child_device() return. This breaks the ACPI video code,
leading to non working backlight control in some cases.
Add a type.backlight flag, mark ACPI video bus devices with this and make
find_child_checks() return a higher score for children with this flag set,
so that it picks the right companion-device.
Fixes: 63f534b8ba ("ACPI: PCI: Rework acpi_get_pci_dev()")
Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f4c549feb upstream.
The MTE coredump code in arch/arm64/kernel/elfcore.c iterates over the
vma list without the mmap_lock held. This can race with another process
or userfaultfd concurrently modifying the vma list. Change the
for_each_mte_vma macro and its callers to instead use the vma snapshot
taken by dump_vma_snapshot() and stored in the cprm object.
Fixes: 6dd8b1a0b6 ("arm64: mte: Dump the MTE tags in the core file")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Suggested-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-4-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 736eedc974 upstream.
Commit 16decce22e ("arm64: mte: Fix the stack frame size warning in
mte_dump_tag_range()") moved the temporary tag storage array from the
stack to slab but it also introduced an error in double freeing this
object. Remove the in-loop freeing.
Fixes: 16decce22e ("arm64: mte: Fix the stack frame size warning in mte_dump_tag_range()")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-2-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0283189e8f upstream.
Sphinx 6.0 removed the execfile_() function, which we use as part of the
configuration process. They *did* warn us... Just open-code the
functionality as is done in Sphinx itself.
Tested (using SPHINX_CONF, since this code is only executed with an
alternative config file) on various Sphinx versions from 2.5 through 6.0.
Reported-by: Martin Liška <mliska@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3f450533b upstream.
Nathan reports that recent kernels built with LTO will crash when doing
EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a
misaligned load from the TPM event log, which is annotated with
READ_ONCE(), and under LTO, this gets translated into a LDAR instruction
which does not tolerate misaligned accesses.
Interestingly, this does not happen when booting the same kernel
straight from the UEFI shell, and so the fact that the event log may
appear misaligned in memory may be caused by a bug in GRUB or SHIM.
However, using READ_ONCE() to access firmware tables is slightly unusual
in any case, and here, we only need to ensure that 'event' is not
dereferenced again after it gets unmapped, but this is already taken
care of by the implicit barrier() semantics of the early_memunmap()
call.
Cc: <stable@vger.kernel.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1782
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e006ac3003 upstream.
After [1][2], if we catch exceptions due to EFI runtime service, we will
clear EFI_RUNTIME_SERVICES bit to disable EFI runtime service, then the
subsequent routine which invoke the EFI runtime service should fail.
But the userspace cat efivars through /sys/firmware/efi/efivars/ will stuck
and infinite loop calling read() due to efivarfs_file_read() return -EINTR.
The -EINTR is converted from EFI_ABORTED by efi_status_to_err(), and is
an improper return value in this situation, so let virt_efi_xxx() return
EFI_DEVICE_ERROR and converted to -EIO to invoker.
Cc: <stable@vger.kernel.org>
Fixes: 3425d934fc ("efi/x86: Handle page faults occurring while running EFI runtime services")
Fixes: 23715a26c8 ("arm64: efi: Recover from synchronous exceptions occurring in firmware")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 406504c7b0 upstream.
A recent development on the EFI front has resulted in guests having
their page tables baked in the firmware binary, and mapped into the
IPA space as part of a read-only memslot. Not only is this legitimate,
but it also results in added security, so thumbs up.
It is possible to take an S1PTW translation fault if the S1 PTs are
unmapped at stage-2. However, KVM unconditionally treats S1PTW as a
write to correctly handle hardware AF/DB updates to the S1 PTs.
Furthermore, KVM injects an exception into the guest for S1PTW writes.
In the aforementioned case this results in the guest taking an abort
it won't recover from, as the S1 PTs mapping the vectors suffer from
the same problem.
So clearly our handling is... wrong.
Instead, switch to a two-pronged approach:
- On S1PTW translation fault, handle the fault as a read
- On S1PTW permission fault, handle the fault as a write
This is of no consequence to SW that *writes* to its PTs (the write
will trigger a non-S1PTW fault), and SW that uses RO PTs will not
use HW-assisted AF/DB anyway, as that'd be wrong.
Only in the case described in c4ad98e4b7 ("KVM: arm64: Assume write
fault on S1PTW permission fault on instruction fetch") do we end-up
with two back-to-back faults (page being evicted and faulted back).
I don't think this is a case worth optimising for.
Fixes: c4ad98e4b7 ("KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Regression-tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45e966fcca upstream.
Passing the host topology to the guest is almost certainly wrong
and will confuse the scheduler. In addition, several fields of
these CPUID leaves vary on each processor; it is simply impossible to
return the right values from KVM_GET_SUPPORTED_CPUID in such a way that
they can be passed to KVM_SET_CPUID2.
The values that will most likely prevent confusion are all zeroes.
Userspace will have to override it anyway if it wishes to present a
specific topology to the guest.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca88eeb308 upstream.
The HP Spectre x360 13-aw0xxx devices use the ALC285 codec with GPIO 0x04
controlling the micmute LED and COEF 0x0b index 8 controlling the mute LED.
A quirk was added to make these work as well as a fixup.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230110202514.2792-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f680609bf upstream.
Turn on power early to avoid wrong state for power relation register.
This can earlier update JD state when resume back.
Signed-off-by: Yuchi Yang <yangyuchi66@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e35d8f4fa18f4448a2315cc7d4a3715f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70051cffb3 upstream.
The use of strncpy() in the set_led_id() was incorrect.
The len variable should use 'min(sizeof(buf2) - 1, count)'
expression.
Use strscpy() function to simplify things and handle the error gracefully.
Fixes: a135dfb5de ("ALSA: led control - add sysfs kcontrol LED marking layer")
Reported-by: yang.yang29@zte.com.cn
Link: https://lore.kernel.org/alsa-devel/202301091945513559977@zte.com.cn/
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 696e1a48b1 upstream.
If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.
Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179.
Reported-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Fixes: f6ae9f120d ("netfilter: nft_payload: add C-VLAN support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae50e2ab12 upstream.
The runtime PM core checks with runtime_idle callback whether it can
goes to the runtime suspend or not, and we can put the boost type
check there instead of runtime_suspend and _resume calls. This will
reduce the unnecessary runtime_suspend() calls.
Fixes: 1873ebd30c ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105093531.16960-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5751933a7 upstream.
There is another Dell Latitude laptop (1028:0c03) with Realtek
codec ALC3254 which needs the ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
instead of the default matched ALC269_FIXUP_DELL1_MIC_NO_PRESENCE.
Apply correct fixup for this particular model to enable headset mic.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230103095332.730677-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15a59cb0a3 upstream.
The recent commit to support the system suspend for CS35L41 caused a
regression on the models with CS35L41_EXT_BOOST_NO_VSPK_SWITC boost
type, as the suspend/resume callbacks just return -EINVAL. This is
eventually handled as a fatal error and blocks the whole system
suspend/resume.
For avoiding the problem, this patch corrects the return code from
cs35l41_system_suspend() and _resume() to 0, and replace dev_err()
with dev_err_once() for stop spamming too much.
Fixes: 88672826e2 ("ALSA: hda: cs35l41: Support System Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/e6751ac2-34f3-d13f-13db-8174fade8308@pm.me
Link: https://lore.kernel.org/r/20230105093531.16960-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c694fbfe6 upstream.
There is a HP platform uses ALC236 codec which using GPIO2 to control
mute LED and GPIO1 to control micmute LED.
Thus, add a quirk to make them work.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105044154.8242-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de1ccb9e61 upstream.
Add the 'HP Engage Flex Mini' device to the force connect list to
enable audio through HDMI.
Signed-off-by: Adrian Chan <adchan@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230109210520.16060-1-adchan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56b88b5056 upstream.
Takes rwsem lock inside snd_ctl_elem_read instead of snd_ctl_elem_read_user
like it was done for write in commit 1fa4445f9a ("ALSA: control - introduce
snd_ctl_notify_one() helper"). Doing this way we are also fixing the following
locking issue happening in the compat path which can be easily triggered and
turned into an use-after-free.
64-bits:
snd_ctl_ioctl
snd_ctl_elem_read_user
[takes controls_rwsem]
snd_ctl_elem_read [lock properly held, all good]
[drops controls_rwsem]
32-bits:
snd_ctl_ioctl_compat
snd_ctl_elem_write_read_compat
ctl_elem_write_read
snd_ctl_elem_read [missing lock, not good]
CVE-2023-0266 was assigned for this issue.
Cc: stable@kernel.org # 5.13+
Signed-off-by: Clement Lecigne <clecigne@google.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230113120745.25464-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96398560f2 upstream.
While experimenting with applying noqueue to a classful queue discipline,
we discovered a NULL pointer dereference in the __dev_queue_xmit()
path that generates a kernel OOPS:
# dev=enp0s5
# tc qdisc replace dev $dev root handle 1: htb default 1
# tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit
# tc qdisc add dev $dev parent 1:1 handle 10: noqueue
# ping -I $dev -w 1 -c 1 1.1.1.1
[ 2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2.173217] #PF: supervisor instruction fetch in kernel mode
...
[ 2.178451] Call Trace:
[ 2.178577] <TASK>
[ 2.178686] htb_enqueue+0x1c8/0x370
[ 2.178880] dev_qdisc_enqueue+0x15/0x90
[ 2.179093] __dev_queue_xmit+0x798/0xd00
[ 2.179305] ? _raw_write_lock_bh+0xe/0x30
[ 2.179522] ? __local_bh_enable_ip+0x32/0x70
[ 2.179759] ? ___neigh_create+0x610/0x840
[ 2.179968] ? eth_header+0x21/0xc0
[ 2.180144] ip_finish_output2+0x15e/0x4f0
[ 2.180348] ? dst_output+0x30/0x30
[ 2.180525] ip_push_pending_frames+0x9d/0xb0
[ 2.180739] raw_sendmsg+0x601/0xcb0
[ 2.180916] ? _raw_spin_trylock+0xe/0x50
[ 2.181112] ? _raw_spin_unlock_irqrestore+0x16/0x30
[ 2.181354] ? get_page_from_freelist+0xcd6/0xdf0
[ 2.181594] ? sock_sendmsg+0x56/0x60
[ 2.181781] sock_sendmsg+0x56/0x60
[ 2.181958] __sys_sendto+0xf7/0x160
[ 2.182139] ? handle_mm_fault+0x6e/0x1d0
[ 2.182366] ? do_user_addr_fault+0x1e1/0x660
[ 2.182627] __x64_sys_sendto+0x1b/0x30
[ 2.182881] do_syscall_64+0x38/0x90
[ 2.183085] entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
[ 2.187402] </TASK>
Previously in commit d66d6c3152 ("net: sched: register noqueue
qdisc"), NULL was set for the noqueue discipline on noqueue init
so that __dev_queue_xmit() falls through for the noqueue case. This
also sets a bypass of the enqueue NULL check in the
register_qdisc() function for the struct noqueue_disc_ops.
Classful queue disciplines make it past the NULL check in
__dev_queue_xmit() because the discipline is set to htb (in this case),
and then in the call to __dev_xmit_skb(), it calls into htb_enqueue()
which grabs a leaf node for a class and then calls qdisc_enqueue() by
passing in a queue discipline which assumes ->enqueue() is not set to NULL.
Fix this by not allowing classes to be assigned to the noqueue
discipline. Linux TC Notes states that classes cannot be set to
the noqueue discipline. [1] Let's enforce that here.
Links:
1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt
Fixes: d66d6c3152 ("net: sched: register noqueue qdisc")
Cc: stable@vger.kernel.org
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20230109163906.706000-1-fred@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a41237ad1 upstream.
We had already disabled this warning for gcc-12 due to bugs in the value
range analysis, but it turns out we end up having some similar problems
with gcc-11.3 too, so let's disable it there too.
Older gcc versions end up being increasingly less relevant, and
hopefully clang and newer version of gcc (ie gcc-13) end up working
reliably enough that we still get the build coverage even when we
disable this for some versions.
Link: https://lore.kernel.org/all/20221227002941.GA2691687@roeck-us.net/
Link: https://lore.kernel.org/all/D8BDBF66-E44C-45D4-9758-BAAA4F0C1998@kernel.org/
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7827c81f02 upstream.
The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.
Found via KCSAN.
Fixes: 28df098881 ("SUNRPC: Use RMW bitops in single-threaded hot paths")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ea25770b0 upstream.
This tests PTRACE_SETREGSET with NT_X86_XSTATE modifying PKRU directly and
removing the PKRU bit from XSTATE_BV.
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-7-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7e5aceace upstream.
The hardware XRSTOR instruction resets the PKRU register to its hardware
init value (namely 0) if the PKRU bit is not set in the xfeatures mask.
Emulating that here restores the pre-5.14 behavior for PTRACE_SET_REGSET
with NT_X86_XSTATE, and makes sigreturn (which still uses XRSTOR) and
ptrace behave identically. KVM has never used XRSTOR and never had this
behavior, so KVM opts-out of this emulation by passing a NULL pkru pointer
to copy_uabi_to_xstate().
Fixes: e84ba47e31 ("x86/fpu: Hook up PKRU into ptrace()")
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-6-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a804c4f83 upstream.
Move KVM's PKRU handling code in fpu_copy_uabi_to_guest_fpstate() to
copy_uabi_to_xstate() so that it is shared with other APIs that write the
XSTATE such as PTRACE_SETREGSET with NT_X86_XSTATE.
This restores the pre-5.14 behavior of ptrace. The regression can be seen
by running gdb and executing `p $pkru`, `set $pkru = 42`, and `p $pkru`.
On affected kernels (5.14+) the write to the PKRU register (which gdb
performs through ptrace) is ignored.
[ dhansen: removed stable@ tag for now. The ABI was broken for long
enough that this is not urgent material. Let's let it stew
in tip for a few weeks before it's submitted to stable
because there are so many ABIs potentially affected. ]
Fixes: e84ba47e31 ("x86/fpu: Hook up PKRU into ptrace()")
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-5-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c87767c35 upstream.
In preparation for moving PKRU handling code out of
fpu_copy_uabi_to_guest_fpstate() and into copy_uabi_to_xstate(), add an
argument that copy_uabi_from_kernel_to_xstate() can use to pass the
canonical location of the PKRU value. For
copy_sigframe_from_user_to_xstate() the kernel will actually restore the
PKRU value from the fpstate, but pass in the thread_struct's pkru location
anyways for consistency.
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-4-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c813ce030 upstream.
Both KVM (through KVM_SET_XSTATE) and ptrace (through PTRACE_SETREGSET
with NT_X86_XSTATE) ultimately call copy_uabi_from_kernel_to_xstate(),
but the canonical locations for the current PKRU value for KVM guests
and processes in a ptrace stop are different (in the kvm_vcpu_arch and
the thread_state structs respectively).
In preparation for eventually handling PKRU in
copy_uabi_to_xstate, pass in a pointer to the PKRU location.
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-3-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a877d2450 upstream.
This will allow copy_sigframe_from_user_to_xstate() to grab the address of
thread_struct's pkru value in a later patch.
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-2-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71bdea6f79 upstream.
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f9b09ccf7 upstream.
We are seeing system stuck on some specific platforms due to
WLAN chip fails to wakeup from D3cold state.
With this flag, firmware will send PME message during wakeup
and this issue is gone.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20221010033237.415478-1-quic_bqiang@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 196dff2712 upstream.
Instead of blindly creating the EFI random seed configuration table if
the RNG protocol is implemented and works, check whether such a EFI
configuration table was provided by an earlier boot stage and if so,
concatenate the existing and the new seeds, leaving it up to the core
code to mix it in and credit it the way it sees fit.
This can be used for, e.g., systemd-boot, to pass an additional seed to
Linux in a way that can be consumed by the kernel very early. In that
case, the following definitions should be used to pass the seed to the
EFI stub:
struct linux_efi_random_seed {
u32 size; // of the 'seed' array in bytes
u8 seed[];
};
The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY
pool memory, and the address of the struct in memory should be installed
as a EFI configuration table using the following GUID:
LINUX_EFI_RANDOM_SEED_TABLE_GUID 1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b
Note that doing so is safe even on kernels that were built without this
patch applied, but the seed will simply be overwritten with a seed
derived from the EFI RNG protocol, if available. The recommended seed
size is 32 bytes, and seeds larger than 512 bytes are considered
corrupted and ignored entirely.
In order to preserve forward secrecy, seeds from previous bootloaders
are memzero'd out, and in order to preserve memory, those older seeds
are also freed from memory. Freeing from memory without first memzeroing
is not safe to do, as it's possible that nothing else will ever
overwrite those pages used by EFI.
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: incorporate Jason's followup changes to extend the maximum seed
size on the consumer end, memzero() it and drop a needless printk]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6217e9f05a upstream.
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.
Fixes: 963bbdb32b ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c57)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 963bbdb32b upstream.
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6fc)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 797805d81b upstream.
"nt_len - CIFS_ENCPWD_SIZE" is passed directly from
ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests
can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative
number (or large unsigned value) used for a subsequent memcpy in
ksmbd_auth_ntlvm2 and can cause a panic.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Hrvoje Mišetić <misetichrvoje@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdfb2fef52 upstream.
Currently, smb2_tree_connect doesn't send an error response packet on
error.
This causes libsmb2 to skip the specific error code and fail with the
following:
smb2_service failed with : Failed to parse fixed part of command
payload. Unexpected size of Error reply. Expected 9, got 8
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83dcedd554 upstream.
If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round
again, It will cause infinite loop issue. And all threads from next
connections would be doing that. This patch add max retry count(2) to
avoid it. kernel_recvmsg() will wait during 7sec timeout and try to
retry two time if -EAGAIN is returned. And add flags of kvmalloc to
__GFP_NOWARN and __GFP_NORETRY to disconnect immediately without
retrying on memory alloation failure.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d73a27b86f ]
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device.
Reported-by: 小太 <nospam@kota.moe>
Link: https://lore.kernel.org/linux-btrfs/CACsxjPYyJGQZ+yvjzxA1Nn2LuqkYqTCcUH43S=+wXhyf8S00Ag@mail.gmail.com/
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3c23bea59 ]
[Why]
SwathSizePerSurfaceY[] and SwathSizePerSurfaceC[] values are uninitialized
because we are using += instead of = operator.
[How]
Assign values in loop with = operator.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x, 6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d4727c809 ]
[WHY?]
Some configurations are constructed with very marginal DET buffers relative to
the worst possible time required to fetch a swath.
[HOW?]
Add a check to see that the DET buffer allocated for each pipe can hide the
latency for all pipes to fetch at least one swath.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: f3c23bea59 ("drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26116c1e7 ]
The virtblk_map_data() function returns negative error codes, however, the
'nents' field of vbr->sg_table is an unsigned int, which causes the error
handling not to work correctly.
Cc: stable@vger.kernel.org
Fixes: 0e9911fa76 ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Suwan Kim <suwan.kim027@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
