Commit graph

63 commits

Author SHA1 Message Date
Linus Torvalds
e3e1288e86 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits)
  DMAENGINE: move COH901318 to arch_initcall
  dma: imx-dma: fix signedness bug
  dma/timberdale: simplify conditional
  ste_dma40: remove channel_type
  ste_dma40: remove enum for endianess
  ste_dma40: remove TIM_FOR_LINK option
  ste_dma40: move mode_opt to separate config
  ste_dma40: move channel mode to a separate field
  ste_dma40: move priority to separate field
  ste_dma40: add variable to indicate valid dma_cfg
  async_tx: make async_tx channel switching opt-in
  move async raid6 test to lib/Kconfig.debug
  dmaengine: Add Freescale i.MX1/21/27 DMA driver
  intel_mid_dma: change the slave interface
  intel_mid_dma: fix the WARN_ONs
  intel_mid_dma: Add sg list support to DMA driver
  intel_mid_dma: Allow DMAC2 to share interrupt
  intel_mid_dma: Allow IRQ sharing
  intel_mid_dma: Add runtime PM support
  DMAENGINE: define a dummy filter function for ste_dma40
  ...
2010-10-27 19:04:36 -07:00
Peter Zijlstra
61ecdb801e mm: strictly nested kmap_atomic()
Ensure kmap_atomic() usage is strictly nested

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Dan Williams
400fb7f6a0 move async raid6 test to lib/Kconfig.debug
The prompt for "Self test for hardware accelerated raid6 recovery" does not
belong in the top level configuration menu.  All the options in
crypto/async_tx/Kconfig are selected and do not depend on CRYPTO.
Kconfig.debug seems like a reasonable fit.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 15:25:04 -07:00
David Woodhouse
2144381da4 Merge branch 'async' of macbook:git/btrfs-unstable
Conflicts:
	drivers/md/Makefile
	lib/raid6/unroll.pl
2010-08-09 10:36:44 +01:00
Linus Torvalds
6f68fbaafb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  DMAENGINE: extend the control command to include an arg
  async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
  DMAENGINE: DMA40 fix for allocation of logical channel 0
  DMAENGINE: DMA40 support paused channel status
  dmaengine: mpc512x: Use resource_size
  DMA ENGINE: Do not reset 'private' of channel
  ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
  ioat3: disable cacheline-unaligned transfers for raid operations
  ioat2,3: convert to producer/consumer locking
  ioat: convert to circ_buf
  DMAENGINE: Support for ST-Ericssons DMA40 block v3
  async_tx: use of kzalloc/kfree requires the include of slab.h
  dmaengine: provide helper for setting txstate
  DMAENGINE: generic channel status v2
  DMAENGINE: generic slave control v2
  dma: timb-dma: Update comment and fix compiler warning
  dma: Add timb-dma
  DMAENGINE: COH 901 318 fix bytesleft
  DMAENGINE: COH 901 318 rename confusing vars
2010-05-21 17:05:46 -07:00
Dan Williams
caa20d974c async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
Saves 24 bytes per descriptor (64-bit) when the channel-switching
capabilities of async_tx are not required.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17 16:24:16 -07:00
Dan Williams
5157b4aa5b raid6: fix recovery performance regression
The raid6 recovery code should immediately drop back to the optimized
synchronous path when a p+q dma resource is not available.  Otherwise we
run the non-optimized/multi-pass async code in sync mode.

Verified with raid6test (NDISKS=255)

Applies to kernels >= 2.6.32.

Cc: <stable@kernel.org>
Acked-by: NeilBrown <neilb@suse.de>
Reported-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-05 07:52:56 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dan Williams
e02a0e47a3 async_tx: expand async raid6 test to cover ioatdma corner case
Add explicit 11 and 12 disks cases to exercise the 0 < src_cnt % 8 < 3
corner case in the ioatdma driver.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-17 13:55:38 -07:00
Dan Williams
7b3cc2b1fc async_tx: build-time toggling of async_{syndrome,xor}_val dma support
ioat3.2 does not support asynchronous error notifications which makes
the driver experience latencies when non-zero pq validate results are
expected.  Provide a mechanism for turning off async_xor_val and
async_syndrome_val via Kconfig.  This approach is generally useful for
any driver that specifies ASYNC_TX_DISABLE_CHANNEL_SWITCH and would like
to force the async_tx api to fall back to the synchronous path for
certain operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:21:03 -07:00
David Woodhouse
e5d84970a5 async_tx: Move ASYNC_RAID6_TEST option to crypto/async_tx/, fix dependencies
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-29 16:41:49 +00:00
Dan Williams
da17bf4306 async_tx: fix asynchronous raid6 recovery for ddf layouts
The raid6 recovery code currently requires special handling of the
4-disk and 5-disk recovery scenarios for the native layout.  Quoting
from commit 0a82a623:

     In these situations the default N-disk algorithm will present
     0-source or 1-source operations to dma devices.  To cover for
     dma devices where the minimum source count is 2 we implement
     4-disk and 5-disk handling in the recovery code.

The ddf layout presents disks=6 and disks=7 to the recovery code in
these situations.  Instead of looking at the number of disks count the
number of non-zero sources in the list and call the special case code
when the number of non-failed sources is 0 or 1.

[neilb@suse.de: replace 'ddf' flag with counting good sources]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-10-19 23:34:46 -07:00
Dan Williams
030b07720b async_pq: rename scribble page
The global scribble page is used as a temporary destination buffer when
disabling the P or Q result is requested.  The local scribble buffer
contains memory for performing address conversions.  Rename the global
variable to avoid confusion.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-10-19 23:34:46 -07:00
Dan Williams
5676470f06 async_pq: kill a stray dma_map() call and other cleanups
- update the kernel doc for async_syndrome to indicate what NULL in the
  source list means
- whitespace fixups

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-10-19 18:20:20 -07:00
NeilBrown
b2141e6951 raid6/async_tx: handle holes in block list in async_syndrome_val
async_syndrome_val check the P and Q blocks used for RAID6
calculations.
With DDF raid6, some of the data blocks might be NULL, so
this needs to be handled in the same way that async_gen_syndrome
handles it.

As async_syndrome_val calls async_xor, also enhance async_xor
to detect and skip NULL blocks in the list.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16 16:40:34 +11:00
NeilBrown
5dd33c9a4c md/async: don't pass a memory pointer as a page pointer.
md/raid6 passes a list of 'struct page *' to the async_tx routines,
which then either DMA map them for offload, or take the page_address
for CPU based calculations.

For RAID6 we sometime leave 'blanks' in the list of pages.
For CPU based calcs, we want to treat theses as a page of zeros.
For offloaded calculations, we simply don't pass a page to the
hardware.

Currently the 'blanks' are encoded as a pointer to
raid6_empty_zero_page.  This is a 4096 byte memory region, not a
'struct page'.  This is mostly handled correctly but is rather ugly.

So change the code to pass and expect a NULL pointer for the blanks.
When taking page_address of a page, we need to check for a NULL and
in that case use raid6_empty_zero_page.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16 16:40:25 +11:00
Dan Williams
1f6672d44c async_tx/raid6: add missing dma_unmap calls to the async fail case
If we are unable to offload async_mult() or async_sum_product(), then
unmap the buffers before falling through to the synchronous path.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-21 10:47:40 -07:00
Dan Williams
1b6df69309 raid6test: fix stack overflow
Testing on x86_64 with NDISKS=255 yields:

   do_IRQ: modprobe near stack overflow (cur:ffff88007d19c000,sp:ffff88007d19c128)

...and eventually

   general protection fault: 0000 [#1]

Moving the scribble buffers off the stack allows the test to complete
successfully.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-16 21:03:29 -07:00
Dan Williams
83544ae9f3 dmaengine, async_tx: support alignment checks
Some engines have transfer size and address alignment restrictions.  Add
a per-operation alignment property to struct dma_device that the async
routines and dmatest can use to check alignment capabilities.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:53 -07:00
Dan Williams
138f4c359d dmaengine, async_tx: add a "no channel switch" allocator
Channel switching is problematic for some dmaengine drivers as the
architecture precludes separating the ->prep from ->submit.  In these
cases the driver can select ASYNC_TX_DISABLE_CHANNEL_SWITCH to modify
the async_tx allocator to only return channels that support all of the
required asynchronous operations.

For example MD_RAID456=y selects support for asynchronous xor, xor
validate, pq, pq validate, and memcpy.  When
ASYNC_TX_DISABLE_CHANNEL_SWITCH=y any channel with all these
capabilities is marked DMA_ASYNC_TX allowing async_tx_find_channel() to
quickly locate compatible channels with the guarantee that dependency
chains will remain on one channel.  When
ASYNC_TX_DISABLE_CHANNEL_SWITCH=n async_tx_find_channel() may select
channels that lead to operation chains that need to cross channel
boundaries using the async_tx channel switch capability.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:51 -07:00
Dan Williams
0403e38277 dmaengine: add fence support
Some engines optimize operation by reading ahead in the descriptor chain
such that descriptor2 may start execution before descriptor1 completes.
If descriptor2 depends on the result from descriptor1 then a fence is
required (on descriptor2) to disable this optimization.  The async_tx
api could implicitly identify dependencies via the 'depend_tx'
parameter, but that would constrain cases where the dependency chain
only specifies a completion order rather than a data dependency.  So,
provide an ASYNC_TX_FENCE to explicitly identify data dependencies.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:50 -07:00
Dan Williams
cb3c82992f async_tx: raid6 recovery self test
Port drivers/md/raid6test/test.c to use the async raid6 recovery
routines.  This is meant as a unit test for raid6 acceleration drivers.  In
addition to the 16-drive test case this implements tests for the 4-disk and
5-disk special cases (dma devices can not generically handle less than 2
sources), and adds a test for the D+Q case.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-29 19:09:28 -07:00
Dan Williams
0a82a6239b async_tx: add support for asynchronous RAID6 recovery operations
async_raid6_2data_recov() recovers two data disk failures

 async_raid6_datap_recov() recovers a data disk and the P disk

These routines are a port of the synchronous versions found in
drivers/md/raid6recov.c.  The primary difference is breaking out the xor
operations into separate calls to async_xor.  Two helper routines are
introduced to perform scalar multiplication where needed.
async_sum_product() multiplies two sources by scalar coefficients and
then sums (xor) the result.  async_mult() simply multiplies a single
source by a scalar.

This implemention also includes, in contrast to the original
synchronous-only code, special case handling for the 4-disk and 5-disk
array cases.  In these situations the default N-disk algorithm will
present 0-source or 1-source operations to dma devices.  To cover for
dma devices where the minimum source count is 2 we implement 4-disk and
5-disk handling in the recovery code.

[ Impact: asynchronous raid6 recovery routines for 2data and datap cases ]

Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Ilya Yanok <yanok@emcraft.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-29 19:09:27 -07:00
Dan Williams
b2f46fd8ef async_tx: add support for asynchronous GF multiplication
[ Based on an original patch by Yuri Tikhonov ]

This adds support for doing asynchronous GF multiplication by adding
two additional functions to the async_tx API:

 async_gen_syndrome() does simultaneous XOR and Galois field
    multiplication of sources.

 async_syndrome_val() validates the given source buffers against known P
    and Q values.

When a request is made to run async_pq against more than the hardware
maximum number of supported sources we need to reuse the previous
generated P and Q values as sources into the next operation.  Care must
be taken to remove Q from P' and P from Q'.  For example to perform a 5
source pq op with hardware that only supports 4 sources at a time the
following approach is taken:

p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08}))
p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10}))

p' = p + q + q + src4 = p + src4
q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4

Note: 4 is the minimum acceptable maxpq otherwise we punt to
synchronous-software path.

The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as
sources (in the above manner) and fill the remaining slots up to maxpq
with the new sources/coefficients.

Note1: Some devices have native support for P+Q continuation and can skip
this extra work.  Devices with this capability can advertise it with
dma_set_maxpq.  It is up to each driver how to handle the
DMA_PREP_CONTINUE flag.

Note2: The api supports disabling the generation of P when generating Q,
this is ignored by the synchronous path but is implemented by some dma
devices to save unnecessary writes.  In this case the continuation
algorithm is simplified to only reuse Q as a source.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-29 19:09:27 -07:00
Dan Williams
95475e5711 async_tx: remove walk of tx->parent chain in dma_wait_for_async_tx
We currently walk the parent chain when waiting for a given tx to
complete however this walk may race with the driver cleanup routine.
The routines in async_raid6_recov.c may fall back to the synchronous
path at any point so we need to be prepared to call async_tx_quiesce()
(which calls  dma_wait_for_async_tx).  To remove the ->parent walk we
guarantee that every time a dependency is attached ->issue_pending() is
invoked, then we can simply poll the initial descriptor until
completion.

This also allows for a lighter weight 'issue pending' implementation as
there is no longer a requirement to iterate through all the channels'
->issue_pending() routines as long as operations have been submitted in
an ordered chain.  async_tx_issue_pending() is added for this case.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-29 19:09:27 -07:00
Dan Williams
af1f951eb6 async_tx: kill needless module_{init|exit}
If module_init and module_exit are nops then neither need to be defined.

[ Impact: pure cleanup ]

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-29 19:09:26 -07:00
Dan Williams
ad283ea4a3 async_tx: add sum check flags
Replace the flat zero_sum_result with a collection of flags to contain
the P (xor) zero-sum result, and the soon to be utilized Q (raid6 reed
solomon syndrome) zero-sum result.  Use the SUM_CHECK_ namespace instead
of DMA_ since these flags will be used on non-dma-zero-sum enabled
platforms.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-29 19:09:26 -07:00
Dan Williams
04ce9ab385 async_xor: permit callers to pass in a 'dma/page scribble' region
async_xor() needs space to perform dma and page address conversions.  In
most cases the code can simply reuse the struct page * array because the
size of the native pointer matches the size of a dma/page address.  In
order to support archs where sizeof(dma_addr_t) is larger than
sizeof(struct page *), or to preserve the input parameters, we utilize a
memory region passed in by the caller.

Since the code is now prepared to handle the case where it cannot
perform address conversions on the stack, we no longer need the
!HIGHMEM64G dependency in drivers/dma/Kconfig.

[ Impact: don't clobber input buffers for address conversions ]

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-03 14:22:28 -07:00
Dan Williams
a08abd8ca8 async_tx: structify submission arguments, add scribble
Prepare the api for the arrival of a new parameter, 'scribble'.  This
will allow callers to identify scratchpad memory for dma address or page
address conversions.  As this adds yet another parameter, take this
opportunity to convert the common submission parameters (flags,
dependency, callback, and callback argument) into an object that is
passed by reference.

Also, take this opportunity to fix up the kerneldoc and add notes about
the relevant ASYNC_TX_* flags for each routine.

[ Impact: moves api pass-by-value parameters to a pass-by-reference struct ]

Signed-off-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-03 14:07:35 -07:00
Dan Williams
88ba2aa586 async_tx: kill ASYNC_TX_DEP_ACK flag
In support of inter-channel chaining async_tx utilizes an ack flag to
gate whether a dependent operation can be chained to another.  While the
flag is not set the chain can be considered open for appending.  Setting
the ack flag closes the chain and flags the descriptor for garbage
collection.  The ASYNC_TX_DEP_ACK flag essentially means "close the
chain after adding this dependency".  Since each operation can only have
one child the api now implicitly sets the ack flag at dependency
submission time.  This removes an unnecessary management burden from
clients of the api.

[ Impact: clean up and enforce one dependency per operation ]

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-03 14:07:34 -07:00
Dan Williams
099f53cb50 async_tx: rename zero_sum to val
'zero_sum' does not properly describe the operation of generating parity
and checking that it validates against an existing buffer.  Change the
name of the operation to 'val' (for 'validate').  This is in
anticipation of the p+q case where it is a requirement to identify the
target parity buffers separately from the source buffers, because the
target parity buffers will not have corresponding pq coefficients.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-04-08 14:28:37 -07:00
Dan Williams
729b5d1b8e dmaengine: allow dma support for async_tx to be toggled
Provide a config option for blocking the allocation of dma channels to
the async_tx api.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25 09:13:25 -07:00
Dan Williams
06164f3194 async_tx: provide __async_inline for HAS_DMA=n archs
To allow an async_tx routine to be compiled away on HAS_DMA=n arch it
needs to be declared __always_inline otherwise the compiler may emit
code and cause a link error.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25 09:13:25 -07:00
Dan Williams
209b84a88f dmaengine: replace dma_async_client_register with dmaengine_get
Now that clients no longer need to be notified of channel arrival
dma_async_client_register can simply increment the dmaengine_ref_count.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:17 -07:00
Dan Williams
2ba05622b8 dmaengine: provide a common 'issue_pending_all' implementation
async_tx and net_dma each have open-coded versions of issue_pending_all,
so provide a common routine in dmaengine.

The implementation needs to walk the global device list, so implement
rcu to allow dma_issue_pending_all to run lockless.  Clients protect
themselves from channel removal events by holding a dmaengine reference.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:14 -07:00
Dan Williams
bec085134e dmaengine: centralize channel allocation, introduce dma_find_channel
Allowing multiple clients to each define their own channel allocation
scheme quickly leads to a pathological situation.  For memory-to-memory
offload all clients can share a central allocator.

This simply moves the existing async_tx allocator to dmaengine with
minimal fixups:
* async_tx.c:get_chan_ref_by_cap --> dmaengine.c:nth_chan
* async_tx.c:async_tx_rebalance --> dmaengine.c:dma_channel_rebalance
* split out common code from async_tx.c:__async_tx_find_channel -->
  dma_find_channel

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:14 -07:00
Dan Williams
6f49a57aa5 dmaengine: up-level reference counting to the module level
Simply, if a client wants any dmaengine channel then prevent all dmaengine
modules from being removed.  Once the clients are done re-enable module
removal.

Why?, beyond reducing complication:
1/ Tracking reference counts per-transaction in an efficient manner, as
   is currently done, requires a complicated scheme to avoid cache-line
   bouncing effects.
2/ Per-transaction ref-counting gives the false impression that a
   dma-driver can be gracefully removed ahead of its user (net, md, or
   dma-slave)
3/ None of the in-tree dma-drivers talk to hot pluggable hardware, but
   if such an engine were built one day we still would not need to notify
   clients of remove events.  The driver can simply return NULL to a
   ->prep() request, something that is much easier for a client to handle.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:14 -07:00
Dan Williams
07f2211e4f dmaengine: remove dependency on async_tx
async_tx.ko is a consumer of dma channels.  A circular dependency arises
if modules in drivers/dma rely on common code in async_tx.ko.  It
prevents either module from being unloaded.

Move dma_wait_for_async_tx and async_tx_run_dependencies to dmaeninge.o
where they should have been from the beginning.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-05 18:10:19 -07:00
Dan Williams
a06d568f7c async_xor: dma_map destination DMA_BIDIRECTIONAL
Mapping the destination multiple times is a misuse of the dma-api.
Since the destination may be reused as a source, ensure that it is only
mapped once and that it is mapped bidirectionally.  This appears to add
ugliness on the unmap side in that it always reads back the destination
address from the descriptor, but gcc can determine that dma_unmap is a
nop and not emit the code that calculates its arguments.

Cc: <stable@kernel.org>
Cc: Saeed Bishara <saeed@marvell.com>
Acked-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-12-08 13:46:00 -07:00
Dan Williams
fdb0ac8061 async_tx: make async_tx_run_dependencies() easier to read
* Rename 'next' to 'dep'
* Move the channel switch check inside the loop to simplify
  termination

Acked-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-13 19:57:04 -07:00
Yuri Tikhonov
de24125dd0 async_tx: fix the bug in async_tx_run_dependencies
Should clear the next pointer of the TX if we are sure that the
next TX (say NXT) will be submitted to the channel too. Overwise,
we break the chain of descriptors, because we lose the information
about the next descriptor to run. So next time, when invoke
async_tx_run_dependencies() with TX, it's TX->next will be NULL, and
NXT will be never submitted.

Cc: <stable@kernel.org>		[2.6.26]
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-05 08:15:47 -07:00
Dan Williams
e34a8ae790 async_tx: fix missing braces in async_xor_zero_sum
Found-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-08-05 10:25:20 -07:00
Linus Torvalds
5554b35933 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (24 commits)
  I/OAT: I/OAT version 3.0 support
  I/OAT: tcp_dma_copybreak default value dependent on I/OAT version
  I/OAT: Add watchdog/reset functionality to ioatdma
  iop_adma: cleanup iop_chan_xor_slot_count
  iop_adma: document how to calculate the minimum descriptor pool size
  iop_adma: directly reclaim descriptors on allocation failure
  async_tx: make async_tx_test_ack a boolean routine
  async_tx: remove depend_tx from async_tx_sync_epilog
  async_tx: export async_tx_quiesce
  async_tx: fix handling of the "out of descriptor" condition in async_xor
  async_tx: ensure the xor destination buffer remains dma-mapped
  async_tx: list_for_each_entry_rcu() cleanup
  dmaengine: Driver for the Synopsys DesignWare DMA controller
  dmaengine: Add slave DMA interface
  dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma unmap
  dmaengine: Add dma_client parameter to device_alloc_chan_resources
  dmatest: Simple DMA memcpy test client
  dmaengine: DMA engine driver for Marvell XOR engine
  iop-adma: fix platform driver hotplug/coldplug
  dmaengine: track the number of clients using a channel
  ...

Fixed up conflict in drivers/dca/dca-sysfs.c manually
2008-07-23 12:03:18 -07:00
Dan Williams
3dce017137 async_tx: remove depend_tx from async_tx_sync_epilog
All callers of async_tx_sync_epilog have called async_tx_quiesce on the
depend_tx, so async_tx_sync_epilog need only call the callback to
complete the operation.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-17 17:59:55 -07:00
Dan Williams
d2c52b7983 async_tx: export async_tx_quiesce
Replace open coded "wait and acknowledge" instances with async_tx_quiesce.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-17 17:59:55 -07:00
Dan Williams
669ab0b210 async_tx: fix handling of the "out of descriptor" condition in async_xor
Ensure forward progress is made when a dmaengine driver is unable to
allocate an xor descriptor by breaking the dependency chain with
async_tx_quisce() and issue any pending descriptors.

Tested with iop-adma by setting device->max_xor = 2 to force multiple
calls to device_prep_dma_xor for each call to async_xor and limiting the
descriptor slot pool to 5.  Discovered that the minimum descriptor pool
size for iop-adma is 2 * iop_chan_xor_slot_cnt(device->max_xor) + 1.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-17 17:59:55 -07:00
Dan Williams
1e55db2d6b async_tx: ensure the xor destination buffer remains dma-mapped
When the number of source buffers for an xor operation exceeds the hardware
channel maximum async_xor creates a chain of dependent operations.  The result
of one operation is reused as an input to the next to continue the xor
calculation.  The destination buffer should remain mapped for the duration of
the entire chain.  To provide this guarantee the code must no longer be allowed
to fallback to the synchronous path as this will preclude the buffer from being
unmapped, i.e. the dma-driver will potentially miss the descriptor with
!DMA_COMPL_SKIP_DEST_UNMAP.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-17 17:59:55 -07:00
Li Zefan
20fc190b0e async_tx: list_for_each_entry_rcu() cleanup
In the rcu update side, don't use list_for_each_entry_rcu().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-17 17:59:47 -07:00
Dan Williams
65bc3ffe8c async_tx: fix async_memset compile error
commit 636bdeaa 'dmaengine: ack to flags: make use of the unused bits in
the 'ack' field' missed an ->ack conversion in
crypto/async_tx/async_memset.c

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 11:57:55 -07:00
Franck Bui-Huu
82524746c2 rcu: split list.h and move rcu-protected lists into rculist.h
Move rcu-protected lists from list.h into a new header file rculist.h.

This is done because list are a very used primitive structure all over the
kernel and it's currently impossible to include other header files in this
list.h without creating some circular dependencies.

For example, list.h implements rcu-protected list and uses rcu_dereference()
without including rcupdate.h.  It actually compiles because users of
rcu_dereference() are macros.  Others RCU functions could be used too but
aren't probably because of this.

Therefore this patch creates rculist.h which includes rcupdates without to
many changes/troubles.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Josh Triplett <josh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-19 10:01:37 +02:00