efifb_probe() will issue an error message in case the kernel is booted
as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid
that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set.
Fixes: 38ac0287b7 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
While importing a dmabuf it is possible that the data of the buffer
is put with offset which is indicated by the SGT offset.
Respect the offset value and forward it to the backend.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
This is the sync up with the canonical definition of the
display protocol in Xen.
1. Add protocol version as an integer
Version string, which is in fact an integer, is hard to handle in the
code that supports different protocol versions. To simplify that
also add the version as an integer.
2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE
There are cases when display data buffer is created with non-zero
offset to the data start. Handle such cases and provide that offset
while creating a display buffer.
3. Add XENDISPL_OP_GET_EDID command
Add an optional request for reading Extended Display Identification
Data (EDID) structure which allows better configuration of the
display connectors over the configuration set in XenStore.
With this change connectors may have multiple resolutions defined
with respect to detailed timing definitions and additional properties
normally provided by displays.
If this request is not supported by the backend then visible area
is defined by the relevant XenStore's "resolution" property.
If backend provides extended display identification data (EDID) with
XENDISPL_OP_GET_EDID request then EDID values must take precedence
over the resolutions defined in XenStore.
4. Bump protocol version to 2.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200813062113.11030-5-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Add YUYV to supported formats, so the frontend can work with the
formats used by cameras and other HW.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20200813062113.11030-4-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The patch c575b7eeb8: "drm/xen-front: Add support for Xen PV
display frontend" from Apr 3, 2018, leads to the following static
checker warning:
drivers/gpu/drm/xen/xen_drm_front_gem.c:140 xen_drm_front_gem_create()
warn: passing zero to 'ERR_CAST'
drivers/gpu/drm/xen/xen_drm_front_gem.c
133 struct drm_gem_object *xen_drm_front_gem_create(struct drm_device *dev,
134 size_t size)
135 {
136 struct xen_gem_object *xen_obj;
137
138 xen_obj = gem_create(dev, size);
139 if (IS_ERR_OR_NULL(xen_obj))
140 return ERR_CAST(xen_obj);
Fix this and the rest of misused places with IS_ERR_OR_NULL in the
driver.
Fixes: c575b7eeb8: "drm/xen-front: Add support for Xen PV display frontend"
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200813062113.11030-3-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
It is possible that the scatter-gather table during dmabuf import has
non-zero offset of the data, but user-space doesn't expect that.
Fix this by failing the import, so user-space doesn't access wrong data.
Fixes: bf8dc55b13 ("xen/gntdev: Implement dma-buf import functionality")
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200813062113.11030-2-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
With support for 32-bit pv guests gone pure pv-code no longer needs to
test for highmem. Dropping those tests removes the need for flushing
in some places.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
With 32-bit pv-guest support removed xen-asm_64.S can be merged with
xen-asm.S
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Xen is requiring 64-bit machines today and since Xen 4.14 it can be
built without 32-bit PV guest support. There is no need to carry the
burden of 32-bit PV guest support in the kernel any longer, as new
guests can be either HVM or PVH, or they can use a 64 bit kernel.
Remove the 32-bit Xen PV support from the kernel.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
dma_cache_maint is getting called passing a dma address which could be
different from a physical address.
Add a struct device* parameter to dma_cache_maint.
Translate the dma_addr_t parameter of dma_cache_maint by calling
dma_to_phys. Do it for the first page and all the following pages, in
case of multipage handling.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-11-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are
getting called passing dma addresses. On some platforms dma addresses
could be different from physical addresses. Before doing any operations
on these addresses we need to convert them back to physical addresses
using dma_to_phys.
Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from
xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys
to do address translations there.
dma_cache_maint is fixed by the next patch.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200710223427.6897-10-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
With some devices physical addresses are different than dma addresses.
To be able to deal with these cases, we need to call phys_to_dma on
physical addresses (including machine addresses in Xen terminology)
before returning them from xen_swiotlb_alloc_coherent and
xen_swiotlb_map_page.
We also need to convert dma addresses back to physical addresses using
dma_to_phys in xen_swiotlb_free_coherent and xen_swiotlb_unmap_page if
we want to do any operations on them.
Call dma_to_phys in is_xen_swiotlb_buffer.
Introduce xen_phys_to_dma and call phys_to_dma in its implementation.
Introduce xen_dma_to_phys and call dma_to_phys in its implementation.
Call xen_phys_to_dma/xen_dma_to_phys instead of
xen_phys_to_bus/xen_bus_to_phys through swiotlb-xen.c.
Everything is taken care of by these changes except for
xen_swiotlb_alloc_coherent and xen_swiotlb_free_coherent, which need a
few explicit phys_to_dma/dma_to_phys calls.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200710223427.6897-9-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
XEN_PFN_PHYS is only used in one place in swiotlb-xen making things more
complex than need to be.
Remove the definition of XEN_PFN_PHYS and open code the cast in the one
place where it is needed.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200710223427.6897-8-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
No functional changes. The parameter is unused in this patch but will be
used by next patches.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-7-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
No functional changes. The parameter is unused in this patch but will be
used by next patches.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-6-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
No functional changes. The parameter is unused in this patch but will be
used by next patches.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-5-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
No functional changes. The parameter is unused in this patch but will be
used by next patches.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-4-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
No functional changes. The parameter is unused in this patch but will be
used by next patches.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-3-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
It is not strictly needed. Call virt_to_phys on xen_io_tlb_start
instead. It will be useful not to have a start_dma_addr around with the
next patches.
Note that virt_to_phys is not the same as xen_virt_to_bus but actually
it is used to compared again __pa(xen_io_tlb_start) as passed to
swiotlb_init_with_tbl, so virt_to_phys is actually what we want.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-2-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_alloc_coherent_pages might return pages for which virt_to_phys and
virt_to_page don't work, e.g. ioremap'ed pages.
So in xen_swiotlb_free_coherent we can't assume that virt_to_page works.
Instead add a is_vmalloc_addr check and use vmalloc_to_page on vmalloc
virt addresses.
This patch fixes the following crash at boot on RPi4 (the underlying
issue is not RPi4 specific):
https://marc.info/?l=xen-devel&m=158862573216800
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
This reverts commit dfd74a1edf.
This has been fixed by commit dca4436d1c which added the out
of bounds check to __add_memory, so that trying to add blocks past
MAX_PHYSMEM_BITS will fail.
Note the check in the Xen balloon driver was bogus anyway, as it
checked the start address of the resource, but it should instead test
the end address to assert the whole resource falls below
MAX_PHYSMEM_BITS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200727091342.52325-4-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
target_unpopulated is incremented with nr_pages at the start of the
function, but the call to free_xenballooned_pages will only subtract
pgno number of pages, and thus the rest need to be subtracted before
returning or else accounting will be skewed.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200727091342.52325-2-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
In 2019, we introduced pin_user_pages*() and now we are converting
get_user_pages*() to the new API as appropriate. [1] & [2] could
be referred for more information. This is case 5 as per document [1].
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Paul Durrant <xadimgnik@gmail.com>
Link: https://lore.kernel.org/r/1594525195-28345-4-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
pages need to be marked as dirty before unpinned it in
unlock_pages() which was oversight. This is fixed now.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Paul Durrant <xadimgnik@gmail.com>
Link: https://lore.kernel.org/r/1594525195-28345-3-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Previously, if lock_pages() end up partially mapping pages, it used
to return -ERRNO due to which unlock_pages() have to go through
each pages[i] till *nr_pages* to validate them. This can be avoided
by passing correct number of partially mapped pages & -ERRNO separately,
while returning from lock_pages() due to error.
With this fix unlock_pages() doesn't need to validate pages[i] till
*nr_pages* for error scenario and few condition checks can be ignored.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Paul Durrant <xadimgnik@gmail.com>
Link: https://lore.kernel.org/r/1594525195-28345-2-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=deY3
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"A single fix for a potential deadlock when printing a message about
spurious interrupts"
* tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/i8259: Use printk_deferred() to prevent deadlock
- clean the generated moc file for xconfig
- fix xconfig bugs, and revert some bad commits
-----BEGIN PGP SIGNATURE-----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=FNIn
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- clean the generated moc file for xconfig
- fix xconfig bugs, and revert some bad commits
* tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove redundant FORCE definition in scripts/Makefile.modpost
kconfig: qconf: remove wrong ConfigList::firstChild()
Revert "kconfig: qconf: don't show goback button on splitMode"
Revert "kconfig: qconf: Change title for the item window"
kconfig: qconf: remove "goBack" debug message
kconfig: qconf: use delete[] instead of delete to free array
kconfig: qconf: compile moc object separately
kconfig: qconf: use if_changed for qconf.moc rule
modpost: explain why we can't use strsep
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8mdWQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM48Qf/eUYXVdGQWErQ/BQR/pLPfTUkjkIj
1C/IGogWijbWPQrtIsnXVG53eULgHocbfzExZ8PzUSfjuZ/g9V8aHGbrGKbg/y6g
SVArpCTu+BDidmLMbjsAKh3f5SEbzZZuFKnoxoEEKiA2TeYqDQ05nxcv9+T4udrs
DWqXnk27y0vR9RtJkf5sqDnyH36cDT9TsbRFPaCt/hFE0UA65UTtWgl1ZaagzmuL
I70z5Ap+/6fsEMoKoys9AKSCpLRGUBu/42fQhZkEq9no0w5PBkzn/YMfapHwT9I+
1i9WUv3gn+FQOXpqAg0+aaPtWwIBIEONbm0qmw4yNNUI24Btq2QjGWxRqg==
=VQPu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and strengthening the validity checks on inputs from new
userspace APIs.
Now I know why I shouldn't prepare pull requests on the weekend, it's
hard to concentrate if your son is shouting about his latest Minecraft
builds in your ear. Fortunately all the patches were ready and I just
had to check the test results..."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM
KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
KVM: arm64: Don't inherit exec permission across page-table levels
KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions
KVM: nVMX: check for invalid hdr.vmx.flags
KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
selftests: kvm: do not set guest mode flag
The same code exists a few lines above.
Fixes: 436b2ac603 ("modpost: invoke modpost only when input files are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This function returns the first child object, but the returned pointer
is not compatible with (ConfigItem *).
Commit cc1c08edcc ("kconfig: qconf: don't show goback button on
splitMode") uncovered this issue because using the pointer from this
function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411)
This function does not work. Remove.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull networking fixes from David Miller:
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXyXDTQAKCRCRxhvAZXjc
olxlAQDCiyWstd8pmtyX4vuaoyDZ6re6P/TCr3mzr6tQyux/zgD/chlfAvJdyzk8
2Tw44odp3gF5EfzF+5wx2whZZPfVrQY=
=Hv2c
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"A simple spelling fix for dequeue_synchronous_signal()"
* tag 'for-linus-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
signal: fix typo in dequeue_synchronous_signal()
- Fix libtraceevent build with binutils 2.35.
- Fix memory leak in process_dynamic_array_len in libtraceevent.
- Fix 'perf test 68' zstd compression for s390.
- Fix record failure when mixed with ARM SPE event.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
Some of the most recent, experimental distros are failing, fixes will be
provided, but those gcc/clang versions are not yet in general use and some
are related to linking with libllvm, not the default build.
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 alpine:3.11 : Ok gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 alpine:edge : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
11 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
13 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
14 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
19 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
20 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
21 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.1.1 20200708 releases/gcc-10.1.0-332-g17327d6cc7, clang version 10.0.0
22 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
25 debian:experimental : FAIL gcc (Debian 10.2.0-3) 10.2.0, clang version 9.0.1-13
26 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
27 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
28 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
29 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
30 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
31 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
32 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
33 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
34 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
35 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
36 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
37 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
38 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
39 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
40 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
41 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
42 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
43 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
44 fedora:32 : Ok gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-2.fc32)
45 fedora:rawhide : FAIL gcc (GCC) 10.1.1 20200618 (Red Hat 10.1.1-2), clang version 10.0.0 (Fedora 10.0.0-6.fc33)
46 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.2.0-r2 p3) 9.2.0
47 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
48 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
49 mageia:7 : Ok gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
50 manjaro:latest : Ok gcc (GCC) 9.2.0, clang version 9.0.0 (tags/RELEASE_900/final)
51 openmandriva:cooker : Ok gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
52 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
53 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
54 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
55 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
56 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.1.1 20200625 [revision c91e43e9363bd119a695d64505f96539fa451bf2], clang version 10.0.0
57 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
58 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.3)
59 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
60 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
61 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
62 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
63 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
69 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
70 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
71 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
72 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
74 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
75 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
79 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
80 ubuntu:18.10 : Ok gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
81 ubuntu:19.04 : Ok gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
82 ubuntu:19.04-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
83 ubuntu:19.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
84 ubuntu:19.04-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
85 ubuntu:19.10 : FAIL gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 9.0.0-2 (tags/RELEASE_900/final)
86 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
#
# uname -a
Linux five 5.8.0-rc7+ #3 SMP Sat Aug 1 15:00:33 -03 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
39efdd94e3 libtraceevent: Fix build with binutils 2.35
# perf version --build-options
perf version 5.8.rc7.g39efdd94e314
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
gtk2: [ on ] # HAVE_GTK2_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: x86 rdpmc : Ok
68: Convert perf time to TSC : Ok
69: DWARF unwind : Ok
70: x86 instruction decoder - new instructions : Ok
71: Intel PT packet decoder : Ok
72: x86 bp modify : Ok
73: probe libc's inet_pton & backtrace it with ping : Ok
74: Use vfs_getname probe to get syscall args filenames : Ok
75: Check open filename arg using perf trace + vfs_getname: Ok
76: Zstd perf.data compression/decompression : Ok
77: Add vfs_getname probe to get syscall args filenames : Ok
#
$ cd ~acme/git/perf; git log --oneline -1 ; make -C tools/perf build-test
39efdd94e3 (HEAD -> perf/urgent, quaco/perf/urgent) libtraceevent: Fix build with binutils 2.35
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
- /home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP: make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP feature-dump
make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP feature-dump
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_debug_O: make DEBUG=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_help_O: make help
make_with_libpfm4_O: make LIBPFM4=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_pure_O: make
make_no_libelf_O: make NO_LIBELF=1
make_tags_O: make tags
make_no_demangle_O: make NO_DEMANGLE=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_libnuma_O: make NO_LIBNUMA=1
make_no_sdt_O: make NO_SDT=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
^[[A^[[5~ make_no_libperl_O: make NO_LIBPERL=1
^Y^Y make_no_slang_O: make NO_SLANG=1
make_clean_all_O: make clean all
make_doc_O: make doc
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_util_map_o_O: make util/map.o
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_no_gtk2_O: make NO_GTK2=1
make_install_prefix_O: make install prefix=/tmp/krava
- /home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC: make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC LDFLAGS='-static' feature-dump
make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC LDFLAGS='-static' feature-dump
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_no_libbpf_O: make NO_LIBBPF=1
make_install_bin_O: make install-bin
make_no_libunwind_O: make NO_LIBUNWIND=1
make_install_O: make install
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_no_newt_O: make NO_NEWT=1
make_no_libbionic_O: make NO_LIBBIONIC=1
make_perf_o_O: make perf.o
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXyW7IwAKCRCyPKLppCJ+
J+zJAPwPEx2F7hJ0X1MgA43PDegopG7yC8lCiothUYyt1GUiSQD8Dysk1HuZWr24
IgWJAcwbAq8akhzsGNXb+Ww2rAG8OQI=
=7vn1
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Fix libtraceevent build with binutils 2.35
- Fix memory leak in process_dynamic_array_len in libtraceevent
- Fix 'perf test 68' zstd compression for s390
- Fix record failure when mixed with ARM SPE event
* tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libtraceevent: Fix build with binutils 2.35
perf tools: Fix record failure when mixed with ARM SPE event
perf tests: Fix test 68 zstd compression for s390
tools lib traceevent: Fix memory leak in process_dynamic_array_len
This reverts commit cc1c08edcc.
Maxim Levitsky reports 'make xconfig' crashes since that commit
(https://lkml.org/lkml/2020/7/18/411)
Or, the following is simple test code that makes it crash:
menu "Menu"
config FOO
bool "foo"
default y
menuconfig BAR
bool "bar"
depends on FOO
endmenu
Select the Split View mode, and double-click "bar" in the right
window, then you will see Segmentation fault.
When 'last' is not set for symbolMode, the following code in
ConfigList::updateList() calls firstChild().
item = last ? last->nextSibling() : firstChild();
However, the pointer returned by ConfigList::firstChild() does not
seem to be compatible with (ConfigItem *), which seems another bug.
I'd rather want to reconsider whether hiding the goback icon is the
right thing to do.
In the following test code, the Split View shows "Menu2" and "Menu3"
in the right window. You can descend into "Menu3", but there is no way
to ascend back to "Menu2" from "Menu3".
menu "Menu1"
config FOO
bool "foo"
default y
menu "Menu2"
depends on FOO
menu "Menu3"
config BAZ
bool "baz"
endmenu
endmenu
endmenu
It is true that the goback button is currently not functional due to
yet another bug, but hiding the problem is not the right way to go.
Anyway, Segmentation fault is fatal. Revert the offending commit for
now, and we should find the right solution.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit 5752ff07fd.
It added dead code to ConfigList:ConfigList().
The constructor of ConfigList has the initializer, mode(singleMode).
if (mode == symbolMode)
setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value");
else
setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");
... always takes the else part.
The change to ConfigList::updateSelection() is strange too.
When you click the split view icon for the first time, the titles in
both windows show "Option". After you click something in the right
window, the title suddenly changes to "Item".
ConfigList::updateSelection() is not the right place to do this,
at least. It was not a good idea, I think.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Every time the goback icon is clicked, the annoying message "goBack"
is displayed on the console.
I guess this line is the left-over debug code of commit af737b4def
("kconfig: qconf: simplify the goBack() logic").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, qconf.moc is included from qconf.cc but they can be compiled
independently.
When you modify qconf.cc, qconf.moc does not need recompiling.
Rename qconf.moc to qconf-moc.cc, and split it out as an independent
compilation unit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Regenerate qconf.moc when the moc command is changed.
This also allows 'make mrproper' to clean it up. Previously, it was
not cleaned up because 'clean-files += qconf.moc' was missing.
Now 'make mrproper' correctly cleans it up because files listed in
'targets' are cleaned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-07-31
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).
The main changes are:
1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.
2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
btf_vmlinux is available, from Peilin Ye.
3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.
4) Fix a cgroup sockopt verifier test by specifying expected attach type,
from Jean-Philippe Brucker.
Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb7f ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a0511 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.
Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:
int btf_resolve_helper_id(struct bpf_verifier_log *log,
const struct bpf_func_proto *fn, int arg)
{
int id;
if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
return -EINVAL;
id = fn->btf_id[arg];
if (!id || id > btf_vmlinux->nr_types)
return -EINVAL;
return id;
}
Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2020-07-31
1) Fix policy matching with mark and mask on userspace interfaces.
From Xin Long.
2) Several fixes for the new ESP in TCP encapsulation.
From Sabrina Dubroca.
3) Fix crash when the hold queue is used. The assumption that
xdst->path and dst->child are not a NULL pointer only if dst->xfrm
is not a NULL pointer is true with the exception of using the
hold queue. Fix this by checking for hold queue usage before
dereferencing xdst->path or dst->child.
4) Validate pfkey_dump parameter before sending them.
From Mark Salyzyn.
5) Fix the location of the transport header with ESP in UDPv6
encapsulation. From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl8jebYACgkQSD+KveBX
+j6Vnwf/Z0LVx9aIVOl+lfIuIqeKCtbwdoh9kTa6wNIuX0c/NnG2u2bt9GjOGyKh
LqTVX6Nu2sfcuTtkyrqhiIj6PyivzHciDN+au8hqrvBV429KsKbNu+jvXJmL/mXX
BU47mExP6ZMsWDTkBEnRQnwSsKDHbUw+xT7LeO36DE9Rrjlox6AtjFeWuJBoyBMO
QlbTjgDHtwV1bJe8sVBrymZmQcy582hEcoZqAGnzDVAF5DW6TAZkSqx3UdiO6KeN
hLTMYZbiIDRDs3n1dOyLlQlXSWzzQzw1gae/Q7nJsYu4VPsGjEeNXUw8d9RNWv4v
EGhJF999G9Np6mjzWtXDC00tM2X7LQ==
=+emh
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2020-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-07-30
This small patchset introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.18:
('net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq')
For -stable v5.7:
('net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.
In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: f037590fff ("rds: fix a leak of kernel memory")
Fixes: bdbe6fbc6a ("RDS: recv.c")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2020-07-30
This series contains updates to the e1000e and igb drivers.
Aaron Ma allows PHY initialization to continue if ULP disable failed for
e1000e.
Francesco Ruggeri fixes race conditions in igb reset that could cause panics.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
