There are cases when the interrupt status register (JRINTR) is non-zero,
even though:
1. An interrupt was generated, but it was masked OR
2. There was no interrupt generated at all
for the corresponding job ring.
1. The case when interrupt is masked (JRCFGR_LS[IMSK]=1b'1)
while other events have happened and are being accounted for, e.g.
-JRINTR[HALT]=2b'10 - input job ring underwent a flush of all on-going
jobs and processing of still-existing jobs (sitting in the ring) has been
halted
-JRINTR[HALT]=2b'01 - input job ring is currently undergoing a flush
-JRINTR[ENTER_FAIL]=1b'1 - SecMon / SNVS transitioned to FAIL MODE
It doesn't matter whether these events would assert the interrupt signal
or not, interrupt is anyhow masked.
2. The case when interrupt is not masked (JRCFGR_LS[IMSK]=1b'0), however
the events accounted for in JRINTR do not generate interrupts, e.g.:
-JRINTR[HALT]=2b'01
-JRINTR[ENTER_FAIL]=1b'1 and JRCFGR_MS[FAIL_MODE]=1b'0
Currently in these cases, when the JR interrupt handler is invoked (as a
consequence of JR sharing the interrupt line with other devices - e.g.
the two JRs on i.MX7ULP) it continues execution instead of returning
IRQ_NONE.
This could lead to situations like interrupt handler clearing JRINTR (and
thus also the JRINTR[HALT] field) while corresponding job ring is
suspended and then that job ring failing on resume path, due to expecting
JRINTR[HALT]=b'10 and reading instead JRINTR[HALT]=b'00.
Fix this by checking status of JRINTR[JRI] in the JR interrupt handler.
If JRINTR[JRI]=1b'0, there was no interrupt generated for this JR and
handler must return IRQ_NONE.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In caam_jr_enqueue, under heavy DDR load, smp_wmb() or dma_wmb()
fail to make the input ring be updated before the CAAM starts
reading it. So, CAAM will process, again, an old descriptor address
and will put it in the output ring. This will make caam_jr_dequeue()
to fail, since this old descriptor is not in the software ring.
To fix this, use wmb() which works on the full system instead of
inner/outer shareable domains.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The newly added PM operations use the deprecated SIMPLE_DEV_PM_OPS() macro,
causing a warning in some configurations:
drivers/crypto/caam/ctrl.c:828:12: error: 'caam_ctrl_resume' defined but not used [-Werror=unused-function]
828 | static int caam_ctrl_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/crypto/caam/ctrl.c:818:12: error: 'caam_ctrl_suspend' defined but not used [-Werror=unused-function]
818 | static int caam_ctrl_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:732:12: error: 'caam_jr_resume' defined but not used [-Werror=unused-function]
732 | static int caam_jr_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:687:12: error: 'caam_jr_suspend' defined but not used [-Werror=unused-function]
687 | static int caam_jr_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Use the normal DEFINE_SIMPLE_DEV_PM_OPS() variant now, and use pm_ptr() to
completely eliminate the structure in configs without CONFIG_PM.
Fixes: 322d74752c ("crypto: caam - add power management support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The RCT cutoff values are correct, but they don't exactly match the ones
one would expect when computing them using the formula in SP800-90B. This
discrepancy is due to the fact that the Jitter Entropy RCT starts at 1. To
avoid any confusion by future reviewers, add some comments and explicitly
subtract 1 from the "correct" cutoff values in the definitions.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During NVMeTCP Authentication a controller can trigger a kernel
oops by specifying the 8192 bit Diffie Hellman group and passing
a correctly sized, but zeroed Diffie Hellamn value.
mpi_cmp_ui() was detecting this if the second parameter was 0,
but 1 is passed from dh_is_pubkey_valid(). This causes the null
pointer u->d to be dereferenced towards the end of mpi_cmp_ui()
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As lib/mpi is mostly used by crypto code, move it under lib/crypto
so that patches touching it get directed to the right mailing list.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function crypto_drop_spawn expects to be called in process
context. However, when an instance is unregistered while it still
has active users, the last user may cause the instance to be freed
in atomic context.
Fix this by delaying the freeing to a work queue.
Fixes: 6bfd48096f ("[CRYPTO] api: Added spawns")
Reported-by: Florent Revest <revest@chromium.org>
Reported-by: syzbot+d769eed29cc42d75e2a3@syzkaller.appspotmail.com
Reported-by: syzbot+610ec0671f51e838436e@syzkaller.appspotmail.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Florent Revest <revest@chromium.org>
Acked-by: Florent Revest <revest@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit ce753ad154 ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk"), there is no possible for
platform_get_irq() to return 0. Use the return value
from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use kfree_sensitive() instead of memset() and kfree().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Calls to lookup_user_key() require a corresponding key_put() to
decrement the usage counter. Once it reaches zero, we schedule key GC.
Therefore decrement struct key.usage in alg_set_by_key_serial().
Fixes: 7984ceb134 ("crypto: af_alg - Support symmetric encryption via keyring keys")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do it more simiply. This also fixes single target builds.
[before]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- arch/arm64/crypto/aes-glue-ce.i
[snip]
make[4]: *** No rule to make target 'arch/arm64/crypto/aes-glue-ce.i'. Stop.
[after]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- arch/arm64/crypto/aes-glue-ce.i
[snip]
CPP arch/arm64/crypto/aes-glue-ce.i
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
stm32_hash_remove() is only called after stm32_hash_probe() succeeded. In
this case platform_set_drvdata() was called with a non-NULL data patameter.
The check for hdev being non-NULL can be dropped because hdev is never NULL
(or something bad like memory corruption happened and then the check
doesn't help any more either).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this
means the clk wasn't prepared and enabled. Returning early in this case
however is wrong as then the following resource frees are skipped and this
is never catched up. So do all the cleanups but clk_disable_unprepare().
Also don't emit a warning, as stm32_hash_runtime_resume() already emitted
one.
Note that the return value of stm32_hash_remove() is mostly ignored by
the device core. The only effect of returning zero instead of an error
value is to suppress another warning in platform_remove(). So return 0
even if pm_runtime_resume_and_get() failed.
Fixes: 8b4d566de6 ("crypto: stm32/hash - Add power management support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kzalloc() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.
Fixes: e22471c233 ("crypto: starfive - Add AES skcipher and aead support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 0788257aee ("hwrng: Explicitly include correct DT includes")
removed an implicit include of io.h. On most architectures, there's
still an implicit include of it, but not on s390. Enabling COMPILE_TEST
in commit 1ce1cd8208 ("hwrng: Enable COMPILE_TEST for more drivers")
exposed this.
Fixes: 0788257aee ("hwrng: Explicitly include correct DT includes")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308042049.8R2tNRoo-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's quite a few hwrng drivers which are easily enabled for
COMPILE_TEST, so let's enable them.
The dependency on HW_RANDOM is redundant, so drop that while we're here.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix af_alg_alloc_areq() to initialise areq->first_rsgl.sgl.sgt.sgl to point
to the scatterlist array in areq->first_rsgl.sgl.sgl.
Without this, the gcm-aes-s390 driver will oops when it tries to do
gcm_walk_start() on req->dst because req->dst is set to the value of
areq->first_rsgl.sgl.sgl by _aead_recvmsg() calling
aead_request_set_crypt().
The problem comes if an empty ciphertext is passed: the loop in
af_alg_get_rsgl() just passes straight out and doesn't set areq->first_rsgl
up.
This isn't a problem on x86_64 using gcmaes_crypt_by_sg() because, as far
as I can tell, that ignores req->dst and only uses req->src[*].
[*] Is this a bug in aesni-intel_glue.c?
The s390x oops looks something like:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000a00000000 TEID: 0000000a00000803
Fault in home space mode while using kernel ASCE.
AS:00000000a43a0007 R3:0000000000000024
Oops: 003b ilc:2 [#1] SMP
...
Call Trace:
[<000003ff7fc3d47e>] gcm_walk_start+0x16/0x28 [aes_s390]
[<00000000a2a342f2>] crypto_aead_decrypt+0x9a/0xb8
[<00000000a2a60888>] aead_recvmsg+0x478/0x698
[<00000000a2e519a0>] sock_recvmsg+0x70/0xb0
[<00000000a2e51a56>] sock_read_iter+0x76/0xa0
[<00000000a273e066>] vfs_read+0x26e/0x2a8
[<00000000a273e8c4>] ksys_read+0xbc/0x100
[<00000000a311d808>] __do_syscall+0x1d0/0x1f8
[<00000000a312ff30>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003ff7fc3e6b4>] gcm_aes_crypt+0x104/0xa68 [aes_s390]
Fixes: c1abe6f570 ("crypto: af_alg: Use extract_iter_to_sg() to create scatterlists")
Reported-by: Ondrej Mosnáček <omosnacek@gmail.com>
Link: https://lore.kernel.org/r/CAAUqJDuRkHE8fPgZJGaKjUjd3QfGwzfumuJBmStPqBhubxyk_A@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Sven Schnelle <svens@linux.ibm.com>
cc: Harald Freudenberger <freude@linux.vnet.ibm.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-crypto@vger.kernel.org
cc: linux-s390@vger.kernel.org
cc: regressions@lists.linux.dev
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Ondrej Mosnáček <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is possible that dma_request_chan will return EPROBE_DEFER,
which means that dd->dev is not ready yet. In this case,
dev_err(dd->dev), there will be no output. This patch fixes the bug.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for suspend and resume operation for PM in CAAM driver.
When the CAAM goes in suspend, the hardware is considered to do nothing.
On some platforms, the power of the CAAM is not turned off so it keeps
its configuration.
On other platforms, it doesn't so it is necessary to save the state of
the CAAM:
- JRs MID
- Address of input and output rings
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The structure partid is not suitable to represent the DECO MID register.
This patch replace partid by masterid which is more appropriate.
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On memory allocation failure, the function calling stack is already logged.
So there is no need to explicitly log an extra message.
Remove them, ans simplify some code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use struct_size() instead of hand-writing it, when allocating a structure
with a flex array.
This is less verbose, more robust and more informative.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use dev_err_probe in error paths of the probe function, making the code a
tiny bit simpler.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remove function is empty, we can delete it. It's ok for a PCI driver
to have no remove function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use dev_err_probe in error paths to make the code a bit shorter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cc_trng_clk_init is called only from the probe function. Merge the two
functions, this saves some lines of code.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call devm_clk_get_optional_enabled in the cctrng driver. We don't have to
disable and unprepare the clock any more in error paths or in the remove
function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not open code the init and exit functions of the cctrng driver.
If we move the BUILD_BUG_ON checks into the probe function, we can use
module_platform_driver and make the code shorter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
key might contain private part of the key, so better use
kfree_sensitive to free it
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adding AES skcipher and aead support to Starfive crypto module.
Skcipher modes of operation include ecb, cbc, ctr, ofb, cfb. Aead modes
include ccm and gcm.
v1->v2:
- Add include interrupt.h to fix compile error. (Herbert)
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't set drvdata, there's nobody who reads it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'tfm' parameter to aes_set_key_common() is never used, so remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable sva error interrupt event. When an error occurs on
the sva module, the device reports an abnormal interrupt to
the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When both the accelerator device and SMMU are busy,
the processing time of the doorbell may be prolonged.
As a result, the doorbell may timeout, especially in the sva
scenario. Therefore, the doorbell timeout is increased.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the system is shut down, the process is killed, but the
accelerator device does not stop executing the tasks. If the
accelerator device still accesses the memory and writes back data
to the memory after the memory is reclaimed by the system,
an NFE error may occur. Therefore, before the system is shut
down, the driver needs to stop the device and write data back
to the memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before removing the driver, flush inter-function communication
work, and subsequent communication work is not processed.
This prevents communication threads from accessing released memory.
Fixes: ("crypto: hisilicon/qm - enable PF and VFs communication")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove flag HASH_FLAGS_DMA_READY as it can put the driver in a deadlock
state.
If the DMA automatically set the DCAL bit, the interrupt indicating the
end of a computation can be raised before the DMA complete sequence.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If IP has MDMAT support, set or reset the bit MDMAT in Control Register.
Fixes: b56403a25a ("crypto: stm32/hash - Support Ux500 hash")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When we are sending the data to HASH with the DMA, we send all the data
provided in the scatterlists of the request.
But in some cases (ex : tcrypt performances tests), we should only send
req->nbytes
When iterating through the scatterlist we verify if it is the last
scatterlist or if the number of bytes sent plus the data of the current
scatterlist is superior of the total number of bytes to hash.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We were reading the length of the scatterlist sg after copying value of
tsg inside.
So we are using the size of the previous scatterlist and for the first
one we are using an unitialised value.
Fix this by copying tsg in sg[0] before reading the size.
Fixes : 8a1012d3f2 ("crypto: stm32 - Support for STM32 HASH module")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit "crypto: stm32 - Fix empty message processing" remove the use of
the argument bufcnt in stm32_hash_write_ctrl.
Hence, we can remove it from the function prototype and simplify the
function declaration.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the all SHA-2 (up to 512) and SHA-3 algorithm support.
Update compatible table to add stm32mp13.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new compatible for stm32mp13 support.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use dev_err_probe to print the error message after a failed hwrng
registration.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We have no device-specific data for silex-insight,ba431-rng. There's no
need to set .data = NULL, this is the default.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not set drvdata in the ba431 driver. Nobody is using it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
