Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with
the rsp managed functions. Allows for removing the cleanup code
for memory management
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-5-tzimmermann@suse.de
The variable delta is not initialized and this will cause unexpected
behaviour with the comparison of tmpdelta < delta. Fix this by setting
it to 0xffffffff. This matches the behaviour as in the similar function
mgag200_pixpll_compute_g200se_04.
v2:
* move fix up by one line to align style with other functions
* add additional tags from similar patch
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Fixes: 2545ac9603 ("drm/mgag200: Abstract pixel PLL via struct mgag200_pll")
Addresses-Coverity: ("Uninitialized scalar variable")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210817163204.494166-1-colin.king@canonical.com
PLL setup can fail if the display mode's clock is not supported by
any PLL configuration. Compute the PLL values during atomic check, so
that atomic commits can fail at the appropriate time. If successful,
use the values in the atomic-update phase.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-14-tzimmermann@suse.de
Inherit from struct drm_crtc_state by embeding it and providing the
rsp callbacks for simple-kms helpers. No functional changes.
The new state struct mgag200_crtc_state will hold PLL values for modeset
operations.
v2:
* move the simple-kms changes into a separate patch (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-13-tzimmermann@suse.de
Move all PLL compute and update functions into mgag200_pll.c. No
functional changes to the rsp algorithms.
Introduce struct mgag200_pll and mgag200_pll_funcs. The data strutures
abstract the details of each revision's PLL. Perform calls to compute
and update functionality via function pointers. Init the PLL once as
part of the driver initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-11-tzimmermann@suse.de
The fields in struct mgag200_pll_values currently hold the bits of
each register. Store the PLL values instead and let the PLL-update
code figure out the bits for each register.
Until now, the compute function either stored plain values or register
bits in struct mgag200_pll_values. The rsp update function used the
values as-is. This made it very hard to correctly interpret the stored
values (e.g., for logging or debugging). With the cleanup, the stored
values now have a clear meaning.
v2:
* add a bit more context in the commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-7-tzimmermann@suse.de
The S parameter is controls the loop filter bandwidth when programming
the PLL. It's currently stored as part of P (i.e., the clock divider.)
Add a separate variable for S prepares the PLL code for further
refactoring. The value of s is currently 0, so it has not yet an effect
on the programming.
v2:
* add a note on the current value of s to commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-6-tzimmermann@suse.de
The _set_plls() functions compute a pixel clock's PLL values
and program the hardware accordingly. This happens during atomic
commits.
For atomic modesetting, it's better to separate computation and
programming from each other. This will allow to compute the PLL
value during atomic checks and catch unsupported modes early.
Split the PLL setup into a compute and an update functions, and
call them one after the other. Computed PLL values are store in
struct mgag200_pll_values. There are four parameters for the PLL,
m, n, p and s. Every compute function stores a value for each
of these parameters, and the rsp update function makes the register
bits from them. The values stored by the compute function are
either plain values or register bits. An additional change is
required to always store plain values.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-5-tzimmermann@suse.de
Return -EINVAL if there's no PLL configuration for the given pixel
clock. The returned errors are currently ignored by the caller, but
the errno codes will become useful when the compute functions run
during atomic checks.
v2:
* give a rational for this change (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-3-tzimmermann@suse.de
Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.
The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.
v2:
* don't duplicate <MISC> update code (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: db05f8d3dc ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de
Inline mgag200_device_init() into mgag200_device_create(), which is
the only caller. Also remove a duplicate error message for
mgag200_modeset_init(). The function will print an error if/where it
failed.
v2:
* include a note about the removed error message in
changelog (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-3-tzimmermann@suse.de
Print the name of the DRM driver when taking over fbdev devices. Makes
the output to dmesg more consistent. Note that the driver name is only
used for printing a string to the kernel log. No UAPI is affected by this
change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i
Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson
Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
The memcpy's destination buffer might have a different pitch than the
source. Support different pitches as function argument.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-2-tzimmermann@suse.de
Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.
The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-5-tzimmermann@suse.de
Don't populate the const array m_div_val on the stack but instead make
it static. Makes the object code smaller by 29 bytes:
Before:
text data bss dec hex filename
34736 4552 0 39288 9978 drivers/gpu/drm/mgag200/mgag200_mode.o
After:
text data bss dec hex filename
34625 4616 0 39241 9949 drivers/gpu/drm/mgag200/mgag200_mode.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204191156.110778-1-colin.king@canonical.com
This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.
TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.
v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.
Note that for armada I also went ahead and made the ioctl array const.
Only cc'ing the driver people who've not been converted (everyone else
is way too much).
v2: Fix one misplaced const static, should be static const (0day)
v3:
- Improve commit message (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
When building imgag200 for the alpha architecture it fails like this:
mgag200_drv.c:233:9: error: implicit declaration of function ‘vmalloc’
233 | bios = vmalloc(size);
| ^~~~~~~
| kmalloc
When building for other architectures vmalloc.h is pulled in via some
other header file - for example asm-generic/io.h.
Use an explicit include of vmalloc.h to fix the build.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: e20dfd27f7 ("drm/mgag200: Add support for G200 desktop cards")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Egbert Eich <eich@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807180547.GA923146@ravnborg.org
The initial value of the PCI option register got lost while refactoring
the driver init code. Restore the setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2021708e0d ("drm/mgag200: Initialize PCI registers early during device setup")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804065158.21049-1-tzimmermann@suse.de
This patch adds support for G200 desktop cards. We can reuse the whole
memory and modesetting code. A few PCI and DAC register values have to
be updated accordingly.
The most significant change is in the PLL setup. The driver parses the
device's BIOS to retrieve clock limits and reference clocks. With no BIOS
found, safe defaults are being used.
v2:
* copy BIOS ROM to system memory and access with regular
load/store; resolves potential HW limitations
* fix some stray whitespaces
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Co-developed-by: Egbert Eich <eich@suse.com>
Signed-off-by: Egbert Eich <eich@suse.com>
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-9-tzimmermann@suse.de
The unique revision id is only useful for G200SE devices. Store the
value in model-specific data within struct mga_device. While at it,
the patch also adds an init helper for the value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-8-tzimmermann@suse.de
MGA cards can run in traditional VGA mode or an enhanced MGA mode; with
the latter being required for KMS. So far, MGA mode was enabled during
modesetting. As it's fundamental for device operation, the patch moves
it next to the device register setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-5-tzimmermann@suse.de
So far, PCI option registers were initialized as part of modesetting,
which is late in the process. As these registers control fundamental
operation, they should be set early.
The patch moves the PCI option handling into device register setup,
before even the device MMIO memory is being mapped. No functional
changes made.
Moving the PCI code next to the device-register setup also allows to
remove the has_sdram field from struct mga_device. The state is now
local to the init helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-4-tzimmermann@suse.de
The mgag200 driver maps registers into the address space. Move the
code into a separate helper function. No functional changes.
One small difference is in the handling of SDRAM/SGRAM. MGA devices
can come with either SDRAM or SGRAM. So far, the driver checked for
SDRAM, which is the common case. The patch moves this code into a
separate helper and checks for SGRAM, which is the special case. The
test itself is the same as before.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-3-tzimmermann@suse.de
SHMEM pages use write-combine caching by default, but can also use the
platform's default page caching. Doing so may improve the performance
of I/O on the framebuffer.
Mgag200's hardware does not access framebuffer pages directly (i.e.,
via DMA), so enabling caching does not have an effect on consistency
of the framebuffer memory or the displayed data.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-2-tzimmermann@suse.de
The prepare and commit helpers for G200WB devices control the BMC.
Rename them accordingly. While at it, also change the passed value's
type to struct mga_device and remove some type upcasting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-7-tzimmermann@suse.de
Modifying the <syncrst> field in mgag200_{enable,disable}_display()
makes the code more readable. Also clear the <asyncrst> field to enable
the display. The other bits in SEQ0 are unused, so no functional changes
are made.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-6-tzimmermann@suse.de
Of the DPMS code, only ON and OFF states are used. Simplify mode setting
by moving both into separate functions and removing the rest.
The original code busy waited in the middle of updating the screen state
in SEQ1. To simplify the procedure, the new code busy waits first and then
updates SEQ1 in one chunk.
The DPMS code also set the LUT before enabling the screen. The patch moves
this code into the simple-display pipe's enable function.
v2:
* comment on SEQ1 updates in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-5-tzimmermann@suse.de
The simple pipe's disable function disables the screen by calling
mgag200_disable_screen(). The simple pipe's enable function enables the
screen by calling mgag200_enable_display().
During modeset operations the screen is off and remains off. It's only
enabled after the modeset has been completed. Therefore remove all code
that sets or clears the <scroff> field while in modeset.
The related code also modifies the <syncrst> field in SEQ0. For now, keep
this code in place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-4-tzimmermann@suse.de
The prepare function write-protects several registers that it doesn't
even touch. Removed the related code.
The code for unprotecting registers also clears VINT interrupts. Both
is now done once during initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-2-tzimmermann@suse.de
The mgag200 driver now uses managed functions for DRM devices. The
individual helpers for modesetting and memory managed are already
covered, so only device allocation and initialization is left for
conversion.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-15-tzimmermann@suse.de
Following current best practice, the instance of struct drm_device is now
embedded in struct mga_device. The respective field has been renamed from
'dev' to 'base' to reflect the relationship. Conversion from DRM device is
done via upcast. Using dev_private is no longer possible.
The patch also open-codes drm_dev_alloc() and DRM device initialization
is now performed by a call to drm_device_init().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-14-tzimmermann@suse.de
Instances of struct drm_device and struct mga_device are now allocated
next to each other in mgag200_driver_load(). Yet another preparation
before embedding the DRM device instance in struct mga_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-13-tzimmermann@suse.de
