Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
Instead of playing with the addressing limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is based on the old idea and code from Milosz Tanski. With the aio
nowait code it becomes mostly trivial now. Buffered writes continue to
return -EOPNOTSUPP if RWF_NOWAIT is passed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This fixes several instances of blk_status_t and bare errno ints being
mixed up, some of which are real bugs.
In the normal case, 0 matches BLK_STS_OK, so we don't observe any
effects of the missing conversion, but in case of errors or passes
through the repair/retry paths, the errors get mixed up.
The changes were identified using 'sparse', we don't have reports of the
buggy behaviour.
Fixes: 4e4cbee93d ("block: switch bios to blk_status_t")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We won't have the struct block_device available in the bio soon, so switch
to the numerical dev_t instead of the block_device pointer for looking up
the check-integrity state.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The superblock is also metadata of the filesystem so the relevant IO
should be tagged as such. We also tag it as high priority, as it's the
last block committed for metadata from a given transaction. Any delays
would effectively block the whole transaction, also blocking any other
operation holding the device_list_mutex.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 38851cc19a ("Btrfs: implement unlocked dio write") implemented
unlocked dio write, allowing multiple dio writers to write to
non-overlapping, and non-eof-extending regions. In doing so it also
introduced a broken memory barrier. It is broken due to 2 things:
1. Memory barriers _MUST_ always be paired, this is clearly not the case
here
2. Checkpatch actually produces a warning if a memory barrier is
introduced that doesn't have a comment explaining how it's being
paired.
Specifically for inode::i_dio_count that's wrapped inside
inode_dio_begin, there is no explicit barrier semantics attached, so
removing is fine as the atomic is used in common the waiter/wakeup
pattern.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently this function is always called with the object id of the root
key of the chunk_tree, which is always BTRFS_CHUNK_TREE_OBJECTID. So
let's subsume it straight into the function itself. No functional
change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
THe function is always called with chunk_objectid set to
BTRFS_FIRST_CHUNK_TREE_OBJECTID. Let's collapse the parameter in the
function itself. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Every shared ref has a parent tree block, which can be get from
btrfs_extent_inline_ref_offset(). And the tree block must be aligned
to the nodesize, so we'd know this inline ref is not valid if this
block's bytenr is not aligned to the nodesize, in which case, most
likely the ref type has been misused.
This adds the above mentioned check and also updates
print_extent_item() called by btrfs_print_leaf() to point out the
invalid ref while printing the tree structure.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BUG_ON() can be triggered when the caller is processing an invalid
extent inline ref, e.g.
a shared data ref is offered instead of an extent data ref, such that
it tries to find a non-existent tree block and then btrfs_search_slot
returns 1 for no such item.
This replaces the BUG_ON() with a WARN() followed by calling
btrfs_print_leaf() to show more details about what's going on and
returning -EINVAL to upper callers.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have a helper to report invalid value of extent inline ref
type, we need to quit gracefully instead of throwing out a kernel panic.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_print_leaf() is used in btrfs_get_extent_inline_ref_type, so
here we really want to print the invalid value of ref type instead of
causing a kernel panic.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_get_extent_inline_ref_type() can report if type is a
valid one and all callers can gracefully deal with that, we don't need
to crash here.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have a helper which can do sanity check, this converts all
btrfs_extent_inline_ref_type to it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An invalid value of extent inline ref type may be read from a
malicious image which may force btrfs to crash.
This adds a helper which does sanity check for the ref type, so we can
know if it's sane, return he type, otherwise return an error.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minimal tweak const types, causing warnings due to other cleanup patches ]
Signed-off-by: David Sterba <dsterba@suse.com>
flush_all_writes is an atomic but does not use the semantics at all,
it's just on/off indicator, we can use bool.
Signed-off-by: David Sterba <dsterba@suse.com>
When changing a file's acl mask, btrfs_set_acl() will first set the
group bits of i_mode to the value of the mask, and only then set the
actual extended attribute representing the new acl.
If the second part fails (due to lack of space, for example) and the
file had no acl attribute to begin with, the system will from now on
assume that the mask permission bits are actual group permission bits,
potentially granting access to the wrong users.
Prevent this by restoring the original mode bits if __btrfs_set_acl
fails.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS_FIRST_CHUNK_TREE_OBJECTIS id the only objectid being used in the
chunk_tree. So remove a variable which is always set to that value and collapse
its usage in callees which are passed this variable. No functional changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_make_block_group is always called with chunk_objectid set to
BTRFS_FIRST_CHUNK_TREE_OBJECTID. There's no reason why this behavior will
change anytime soon, so let's remove the argument and decrease the cognitive
load when reading the code path. No functional change
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need for the extra pair of parentheses, remove it. This
fixes the following warning when building with clang:
fs/btrfs/tree-log.c:3694:10: warning: equality comparison with extraneous
parentheses [-Wparentheses-equality]
if ((i == (nr - 1)))
~~^~~~~~~~~~~
Also remove the unnecessary parentheses around the substraction.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_alloc_dev_extent currently unconditionally sets the uuid in the
leaf block header the function is working with. This is unnecessary
since this operation is peformed by the core btree handling code
(splitting a node, allocating a new btree block etc). So let's remove
it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch provides a band aid to improve the 'out of the box'
behaviour of btrfs for disks that are detected as being an ssd. In a
general purpose mixed workload scenario, the current ssd mode causes
overallocation of available raw disk space for data, while leaving
behind increasing amounts of unused fragmented free space. This
situation leads to early ENOSPC problems which are harming user
experience and adoption of btrfs as a general purpose filesystem.
This patch modifies the data extent allocation behaviour of the ssd mode
to make it behave identical to nossd mode. The metadata behaviour and
additional ssd_spread option stay untouched so far.
Recommendations for future development are to reconsider the current
oversimplified nossd / ssd distinction and the broken detection
mechanism based on the rotational attribute in sysfs and provide
experienced users with a more flexible way to choose allocator behaviour
for data and metadata, optimized for certain use cases, while keeping
sane 'out of the box' default settings. The internals of the current
btrfs code have more potential than what currently gets exposed to the
user to choose from.
The SSD story...
In the first year of btrfs development, around early 2008, btrfs
gained a mount option which enables specific functionality for
filesystems on solid state devices. The first occurance of this
functionality is in commit e18e4809, labeled "Add mount -o ssd, which
includes optimizations for seek free storage".
The effect on allocating free space for doing (data) writes is to
'cluster' writes together, writing them out in contiguous space, as
opposed to a 'tetris' way of putting all separate writes into any free
space fragment that fits (which is what the -o nossd behaviour does).
A somewhat simplified explanation of what happens is that, when for
example, the 'cluster' size is set to 2MiB, when we do some writes, the
data allocator will search for a free space block that is 2MiB big, and
put the writes in there. The ssd mode itself might allow a 2MiB cluster
to be composed of multiple free space extents with some existing data in
between, while the additional ssd_spread mount option kills off this
option and requires fully free space.
The idea behind this is (commit 536ac8ae): "The [...] clusters make it
more likely a given IO will completely overwrite the ssd block, so it
doesn't have to do an internal rwm cycle."; ssd block meaning nand erase
block. So, effectively this means applying a "locality based algorithm"
and trying to outsmart the actual ssd.
Since then, various changes have been made to the involved code, but the
basic idea is still present, and gets activated whenever the ssd mount
option is active. This also happens by default, when the rotational flag
as seen at /sys/block/<device>/queue/rotational is set to 0.
However, there's a number of problems with this approach.
First, what the optimization is trying to do is outsmart the ssd by
assuming there is a relation between the physical address space of the
block device as seen by btrfs and the actual physical storage of the
ssd, and then adjusting data placement. However, since the introduction
of the Flash Translation Layer (FTL) which is a part of the internal
controller of an ssd, these attempts are futile. The use of good quality
FTL in consumer ssd products might have been limited in 2008, but this
situation has changed drastically soon after that time. Today, even the
flash memory in your automatic cat feeding machine or your grandma's
wheelchair has a full featured one.
Second, the behaviour as described above results in the filesystem being
filled up with badly fragmented free space extents because of relatively
small pieces of space that are freed up by deletes, but not selected
again as part of a 'cluster'. Since the algorithm prefers allocating a
new chunk over going back to tetris mode, the end result is a filesystem
in which all raw space is allocated, but which is composed of
underutilized chunks with a 'shotgun blast' pattern of fragmented free
space. Usually, the next problematic thing that happens is the
filesystem wanting to allocate new space for metadata, which causes the
filesystem to fail in spectacular ways.
Third, the default mount options you get for an ssd ('ssd' mode enabled,
'discard' not enabled), in combination with spreading out writes over
the full address space and ignoring freed up space leads to worst case
behaviour in providing information to the ssd itself, since it will
never learn that all the free space left behind is actually free. There
are two ways to let an ssd know previously written data does not have to
be preserved, which are sending explicit signals using discard or
fstrim, or by simply overwriting the space with new data. The worst
case behaviour is the btrfs ssd_spread mount option in combination with
not having discard enabled. It has a side effect of minimizing the reuse
of free space previously written in.
Fourth, the rotational flag in /sys/ does not reliably indicate if the
device is a locally attached ssd. For example, iSCSI or NBD displays as
non-rotational, while a loop device on an ssd shows up as rotational.
The combination of the second and third problem effectively means that
despite all the good intentions, the btrfs ssd mode reliably causes the
ssd hardware and the filesystem structures and performance to be choked
to death. The clickbait version of the title of this story would have
been "Btrfs ssd optimizations considered harmful for ssds".
The current nossd 'tetris' mode (even still without discard) allows a
pattern of overwriting much more previously used space, causing many
more implicit discards to happen because of the overwrite information
the ssd gets. The actual location in the physical address space, as seen
from the point of view of btrfs is irrelevant, because the actual writes
to the low level flash are reordered anyway thanks to the FTL.
Changes made in the code
1. Make ssd mode data allocation identical to tetris mode, like nossd.
2. Adjust and clean up filesystem mount messages so that we can easily
identify if a kernel has this patch applied or not, when providing
support to end users. Also, make better use of the *_and_info helpers to
only trigger messages on actual state changes.
Backporting notes
Notes for whoever wants to backport this patch to their 4.9 LTS kernel:
* First apply commit 951e7966 "btrfs: drop the nossd flag when
remounting with -o ssd", or fixup the differences manually.
* The rest of the conflicts are because of the fs_info refactoring. So,
for example, instead of using fs_info, it's root->fs_info in
extent-tree.c
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although this bio has no data attached, it will reach this condition
(bio->bi_opf & REQ_PREFLUSH) and then update the flush_gen of dev_state
in __btrfsic_submit_bio. So we should still submit it through integrity
checker. Otherwise, the integrity checker will throw the following warning
when I mount a newly created btrfs filesystem.
[10264.755497] btrfs: attempt to write superblock which references block M @29523968 (sdb1/1111654400/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)!
[10264.755498] btrfs: attempt to write superblock which references block M @29523968 (sdb1/37912576/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)!
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing an incremental send it's possible that the computed send stream
contains clone operations that will fail on the receiver if the receiver
has compression enabled and the clone operations target a sector sized
extent that starts at a zero file offset, is not compressed on the source
filesystem but ends up being compressed and inlined at the destination
filesystem.
Example scenario:
$ mkfs.btrfs -f /dev/sdb
$ mount -o compress /dev/sdb /mnt
# By doing a direct IO write, the data is not compressed.
$ xfs_io -f -d -c "pwrite -S 0xab 0 4K" /mnt/foobar
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
$ xfs_io -c "reflink /mnt/foobar 0 8K 4K" /mnt/foobar
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap2
$ btrfs send -f /tmp/1.snap /mnt/mysnap1
$ btrfs send -f /tmp/2.snap -p /mnt/mysnap1 /mnt/mysnap2
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount -o compress /dev/sdc /mnt
$ btrfs receive -f /tmp/1.snap /mnt
$ btrfs receive -f /tmp/2.snap /mnt
ERROR: failed to clone extents to foobar
Operation not supported
The same could be achieved by mounting the source filesystem without
compression and doing a buffered IO write instead of a direct IO one,
and mounting the destination filesystem with compression enabled.
So fix this by issuing regular write operations in the send stream
instead of clone operations when the source offset is zero and the
range has a length matching the sector size.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a corner case that slips through the checkers in functions
reading extent buffer, ie.
if (start < eb->len) and (start + len > eb->len),
then
a) map_private_extent_buffer() returns immediately because
it's thinking the range spans across two pages,
b) and the checkers in read_extent_buffer(), WARN_ON(start > eb->len)
and WARN_ON(start + len > eb->start + eb->len), both are OK in this
corner case, but it'd actually try to access the eb->pages out of
bounds because of (start + len > eb->len).
The case is found by switching extent inline ref type from shared data
ref to non-shared data ref, which is a kind of metadata corruption.
It'd use the wrong helper to access the eb,
eg. btrfs_extent_data_ref_root(eb, ref) is used but the %ref passing
here is "struct btrfs_shared_data_ref". And if the extent item
happens to be the first item in the eb, then offset/length will get
over eb->len which ends up an invalid memory access.
This is adding proper checks in order to avoid invalid memory access,
ie. 'general protection fault', before it's too late.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The buffer passed to btrfs_ioctl_tree_search* functions have to be at least
sizeof(struct btrfs_ioctl_search_header). If this is not the case then the
ioctl should return -EOVERFLOW and set the uarg->buf_size to the minimum
required size. Currently btrfs_ioctl_tree_search_v2 would return an -EOVERFLOW
error with ->buf_size being set to the value passed by user space. Fix this by
removing the size check and relying on search_ioctl, which already includes it
and correctly sets buf_size.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the code checks whether we should do data checksumming in
btrfs_submit_direct and the boolean result of this check is passed to
btrfs_submit_direct_hook, in turn passing it to __btrfs_submit_dio_bio which
actually consumes it. The last function actually has all the necessary context
to figure out whether to skip the check or not, so let's move the check closer
to where it's being consumed. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the range being cleared was not marked for defrag and we are not
about to clear the range from the defrag status, we don't need to
lock and unlock the inode.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The error return variable ret is initialized to zero and then is
checked to see if it is non-zero in the if-block that follows it.
It is therefore impossible for ret to be non-zero after the if-block
hence the check is redundant and can be removed.
Detected by CoverityScan, CID#1021040 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The internal free space tree management routines are always exposed for
testing purposes. Make them dependent on SANITY_TESTS being on so that
they are exposed only when they really have to.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This variable was added in 1abe9b8a13 ("Btrfs: add initial tracepointi
support for btrfs"), yet it never really got used, only assigned to. So
let's remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a WARN_ON(!var) inside an if branch which is executed (among
others) only when var is true.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We aren't using this define, so removing it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Though BTRFS_FSID_SIZE and BTRFS_UUID_SIZE are of the same size, we
should use the matching constant for the fsid buffer.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Our dir_context->pos is supposed to hold the next position we're
supposed to look. If we successfully insert a delayed dir index we
could end up with a duplicate entry because we don't increase ctx->pos
after doing the dir_emit.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Readdir does dir_emit while under the btree lock. dir_emit can trigger
the page fault which means we can deadlock. Fix this by allocating a
buffer on opening a directory and copying the readdir into this buffer
and doing dir_emit from outside of the tree lock.
Thread A
readdir <holding tree lock>
dir_emit
<page fault>
down_read(mmap_sem)
Thread B
mmap write
down_write(mmap_sem)
page_mkwrite
wait_ordered_extents
Process C
finish_ordered_extent
insert_reserved_file_extent
try to lock leaf <hang>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy the deadlock scenario to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently should_alloc_chunk uses ->total_bytes - ->bytes_readonly to
signify the total amount of bytes in this space info. However, given
Jeff's patch which adds bytes_pinned and bytes_may_use to the calculation
of num_allocated it becomes a lot more clear to just eliminate num_bytes
altogether and add the bytes_readonly to the amount of used space. That
way we don't change the results of the following statements. In the
process also start using btrfs_space_info_used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a heavy write scenario, we can end up with a large number of pinned bytes.
This can translate into (very) premature ENOSPC because pinned bytes
must be accounted for when allowing a reservation but aren't accounted for
when deciding whether to create a new chunk.
This patch adds the accounting to should_alloc_chunk so that we can
create the chunk.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a minimal patch intended to be backported to older kernels.
We're going to extend the string specifying the compression method and
this would fail on kernels before that change (the string is compared
exactly).
Relax the string matching only to the prefix, ie. ignoring anything that
goes after "zlib" or "lzo", regardless of th format extension we decide
to use. This applies to the mount options and properties.
That way, patched old kernels could be booted on systems already
utilizing the new compression spec.
Applicable since commit 63541927c8, v3.14.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the BTRFS_INODE_NOCOMPRESS will prevent any compression on a
given file, except when the mount is force-compress. As users have
reported on IRC, this will also prevent compression when requested by
defrag (btrfs fi defrag -c file).
The nocompress flag is set automatically by filesystem when the ratios
are bad and the user would have to manually drop the bit in order to
make defrag -c work. This is not good from the usability perspective.
This patch will raise priority for the defrag -c over nocompress, ie.
any file with NOCOMPRESS bit set will get defragmented. The bit will
remain untouched.
Alternate option was to also drop the nocompress bit and keep the
decision logic as is, but I think this is not the right solution.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new value for compression to distinguish between defrag and
property. Previously, a single variable was used and this caused clashes
when the per-file 'compression' was set and a defrag -c was called.
The property-compression is loaded when the file is open, defrag will
overwrite the same variable and reset to 0 (ie. NONE) at when the file
defragmentaion is finished. That's considered a usability bug.
Now we won't touch the property value, use the defrag-compression. The
precedence of defrag is higher than for property (and whole-filesystem).
Signed-off-by: David Sterba <dsterba@suse.com>
This is preparatory for separating inode compression requested by defrag
and set via properties. This will fix a usability bug when defrag will
reset compression type to NONE. If the file has compression set via
property, it will not apply anymore (until next mount or reset through
command line).
We're going to fix that by adding another variable just for the defrag
call and won't touch the property. The defrag will have higher priority
when deciding whether to compress the data.
Signed-off-by: David Sterba <dsterba@suse.com>
Add skeleton code for compresison heuristics. Now it iterates over all
the pages, but in the end always says "yes, compress please", ie it does
not change the current behaviour.
In the future we're going to add various heuristics to analyze the data.
This patch can be used as a baseline for measuring if the effectivness
and performance.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhanced changelog, modified comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Correctly account for IO when waiting for a submitted bio in scrub. This
only for the accounting purposes and should not change other behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
Correctly account for IO when waiting for a submitted DIO read, the case
when we're retrying. This only for the accounting purposes and should
not change other behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
The pinned chunks might be left over so we clean them but at this point
of close_ctree, there's noone to race with, the locking can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>
The return value of flush_space was used to have significance in the
early days when the code was first introduced and before the ticketed
enospc rework. Since the latter got introduced the return value lost any
significance whatsoever to its callers. So let's remove it. While at it
also remove the unused ticket variable in
btrfs_async_reclaim_metadata_space. It was used in the initial version
of the ticketed ENOSPC work, however Wang Xiaoguang detected a problem
with this and fixed it in ce129655c9 ("btrfs: introduce tickets_id to
determine whether asynchronous metadata reclaim work makes progress").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Userspace transactions were introduced in commit 6bf13c0cc8 ("Btrfs:
transaction ioctls") to provide semantics that Ceph's object store
required. However, things have changed significantly since then, to the
point where btrfs is no longer suitable as a backend for ceph and in
fact it's actively advised against such usages. Considering this, there
doesn't seem to be a widespread, legit use case of userspace
transaction. They also clutter the file->private pointer.
So to end the agony let's nuke the userspace transaction ioctls. As a
first step let's give time for people to voice their objection by just
WARN()ining when the userspace transaction is used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ move the warning past perm checks, keep the has-been-printed state;
we're ok with just one warning over all filesystems ]
Signed-off-by: David Sterba <dsterba@suse.com>
Superblock is read and written using buffer heads, we need to set the
bdev blocksize. The magic constant has been hardcoded in several places,
so replace it with a named constant.
Signed-off-by: David Sterba <dsterba@suse.com>
There are two independent parts, one that writes the superblocks and
another that waits for completion. No functional changes, but cleanups,
reformatting and comment updates.
Signed-off-by: David Sterba <dsterba@suse.com>
Polish the helper:
* drop underscores, no special meaning here
* pass fs_devices, as this is what the API implements
* drop noinline, no apparent reason for such simple helper
* constify uuid
* add comment
Signed-off-by: David Sterba <dsterba@suse.com>
There are two helpers called in chain from one location, we can merge the
functionaliy.
Originally, alloc_fs_devices could fill the device uuid randomly if we
we didn't give the uuid buffer. This happens for seed devices but the
fsid is generated in btrfs_prepare_sprout, so we can remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
The function submit_extent_page has 15(!) parameters right now, op and
op_flags are effectively one value stored to bio::bi_opf, no need to
pass them separately. So it's 14 parameters now.
Signed-off-by: David Sterba <dsterba@suse.com>
This function prints an informative message and then continues
dev-replace. The message contains a progress percentage which is read
from the status. The status is allocated dynamically, about 2600 bytes,
just to read the single value. That's an overkill. We'll use the new
helper and drop the allocation.
Signed-off-by: David Sterba <dsterba@suse.com>
We'll want to read the percentage value from dev_replace elsewhere, move
the logic to a separate helper.
Signed-off-by: David Sterba <dsterba@suse.com>
All sorts of readahead errors are not considered fatal. We can continue
defragmentation without it, with some potential slow down, which will
last only for the current inode.
Signed-off-by: David Sterba <dsterba@suse.com>
We can safely use GFP_KERNEL, the function is called from two contexts:
- ioctl handler, called directly, no locks taken
- cleaner thread, running all queued defrag work, outside of any locks
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to restrict the allocation flags in btrfs_mount or
_remount. No big filesystem locks are held (possibly s_umount but that
does no count here).
Signed-off-by: David Sterba <dsterba@suse.com>
One of the error handling paths in __add_reloc_root contains btrfs_panic()
followed by some other code. As the name implies what it does is print
some error message and call BUG, naturally what follow afterwards is not
invoked. So remove this extra code.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This also adjusts the respective callers in other files. Those were
found with -Wunused-parameter.
btrfs_full_stripe_len's mapping_tree - introduced by 53b381b3ab
("Btrfs: RAID5 and RAID6") but it was never really used even in that
commit
btrfs_is_parity_mirror's mirror_num - same as above
chunk_drange_filter's chunk_offset - introduced by 94e60d5a5c ("Btrfs:
devid subset filter") and never used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
clear_super - usage was removed in commit cea67ab92d ("btrfs: clean
the old superblocks before freeing the device") but that change forgot
to remove the actual variable.
max_key - commit 6174d3cb43 ("Btrfs: remove unused max_key arg from
btrfs_search_forward") removed the max_key parameter but it forgot to
remove references from callers.
stripe_len - this one was added by e06cd3dd7c ("Btrfs: add validadtion
checks for chunk loading") but even then it wasn't used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
find_raid56_stripe_len statically returns SZ_64K which equals BTRFS_STRIPE_LEN.
It's sole caller is __btrfs_alloc_chunk and it assigns the return value to ai
variable which is already set to BTRFS_STRIPE_LEN. So remove the function
invocation altogether and remove the function itself. Also remove the variable
since it's only aliasing BTRFS_STRIPE_LEN and use the define directly. Use
the occassion to simplify the rounding down of stripe_size now that the value
we want it to align is a power of 2.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes, just make the code more self-explanatory.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_new_inode() is the only consumer move it to inode.c,
from ioctl.c.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
find_workspace() allocates up to num_online_cpus() + 1 workspaces.
free_workspace() will only keep num_online_cpus() workspaces. When
(de)compressing we will allocate num_online_cpus() + 1 workspaces, then
free one, and repeat. Instead, we can just keep num_online_cpus() + 1
workspaces around, and never have to allocate/free another workspace in the
common case.
I tested on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. I mounted a
BtrFS partition with -o compress-force={lzo,zlib,zstd} and logged whenever
a workspace was allocated of freed. Then I copied vmlinux (527 MB) to the
partition. Before the patch, during the copy it would allocate and free 5-6
workspaces. After, it only allocated the initial 3. This held true for lzo,
zlib, and zstd. The time it took to execute cp vmlinux /mnt/btrfs && sync
dropped from 1.70s to 1.44s with lzo compression, and from 2.04s to 1.80s
for zstd compression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers append "\n" so we can keep the actual strings shorter. The
extra newline will print an empty line. Some messages have been
slightly modified to be more consistent with the rest (lowercase first
letter).
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current code was erroneously checking for
root_level > BTRFS_MAX_LEVEL. If we had a root_level of 8 then the check
won't trigger and we could potentially hit a buffer overflow. The
correct check should be root_level >= BTRFS_MAX_LEVEL .
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a missing device, btrfs will just refuse to mount with almost
meaningless kernel message like:
BTRFS info (device vdb6): disk space caching is enabled
BTRFS info (device vdb6): has skinny extents
BTRFS error (device vdb6): failed to read the system array: -5
BTRFS error (device vdb6): open_ctree failed
This patch will print a new message about the missing device:
BTRFS info (device vdb6): disk space caching is enabled
BTRFS info (device vdb6): has skinny extents
BTRFS warning (device vdb6): devid 2 uuid 80470722-cad2-4b90-b7c3-fee294552f1b is missing
BTRFS error (device vdb6): failed to read the system array: -5
BTRFS error (device vdb6): open_ctree failed
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As we use per-chunk degradable check, the global
num_tolerated_disk_barrier_failures is of no use.
We can now remove it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of num_tolerated_disk_barrier_failures is
barrier_all_devices().
But it can be easily changed to the new per-chunk degradable check
framework.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just the same for mount time check, use btrfs_check_rw_degradable() to
check if we are OK to be remounted rw.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now use the btrfs_check_rw_degradable() to check if we can mount in the
degraded mode.
With this patch, we can mount in the following case:
# mkfs.btrfs -f -m raid1 -d single /dev/sdb /dev/sdc
# wipefs -a /dev/sdc
# mount /dev/sdb /mnt/btrfs -o degraded
As the single data chunk is only on sdb, so it's OK to mount as
degraded, as missing one device is OK for RAID1.
But still fail in the following case as expected:
# mkfs.btrfs -f -m raid1 -d single /dev/sdb /dev/sdc
# wipefs -a /dev/sdb
# mount /dev/sdc /mnt/btrfs -o degraded
As the data chunk is only in sdb, so it's not OK to mount it as
degraded.
Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reported-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new function, btrfs_check_rw_degradable(), to check if all
chunks in btrfs is OK for degraded rw mount.
It provides the new basis for accurate btrfs mount/remount and even
runtime degraded mount check other than old one-size-fit-all method.
Btrfs currently uses num_tolerated_disk_barrier_failures to do global
check for tolerated missing device.
Although the one-size-fit-all solution is quite safe, it's too strict
if data and metadata has different duplication level.
For example, if one use Single data and RAID1 metadata for 2 disks, it
means any missing device will make the fs unable to be degraded
mounted.
But in fact, some times all single chunks may be in the existing
device and in that case, we should allow it to be rw degraded mounted.
Such case can be easily reproduced using the following script:
# mkfs.btrfs -f -m raid1 -d sing /dev/sdb /dev/sdc
# wipefs -f /dev/sdc
# mount /dev/sdb -o degraded,rw
If using btrfs-debug-tree to check /dev/sdb, one should find that the
data chunk is only in sdb, so in fact it should allow degraded mount.
This patchset will introduce a new per-chunk degradable check for
btrfs, allow above case to succeed, and it's quite small anyway.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copied text from cover letter with more details about the problem being
solved ]
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs fails the checksum check, it'll fill the whole page with
"1".
However, if %csum_expected is 0 (which means there is no checksum), then
for some unknown reason, we just pretend that the read is correct, so
userspace would be confused about the dilemma that read is successful but
getting a page with all content being "1".
This can happen due to a bug in btrfs-convert.
This fixes it by always returning errors if checksum doesn't match.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_full_stripe_len/btrfs_is_parity_mirror we have similar code which
gets the chunk map for a particular range via get_chunk_map. However,
get_chunk_map can return an ERR_PTR value and while the 2 callers do catch
this with a WARN_ON they then proceed to indiscriminately dereference the
extent map. This of course leads to a crash. Fix the offenders by making the
dereference conditional on IS_ERR.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Many commits ago the data space_info in alloc_data_chunk_ondemand used to be
acquired from the inode. At that point commit
33b4d47f5e ("Btrfs: deal with NULL space info") got introduced to deal with
spurios cases where the space info could be null, following a rebalance.
Nowadays, however, the space info is referenced directly from the btrfs_fs_info
struct which is initialised at filesystem mount time. This makes the null
checks redundant, so remove them.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers of flush_space pass the same number for orig/num_bytes
arguments. Let's remove one of the numbers and also modify the trace
point to show only a single number - bytes requested.
Seems that last point where the two parameters were treated differently
is before the ticketed enospc rework.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Several distributions mount the "proper root" as ro during initrd and
then remount it as rw before pivot_root(2). Thus, if a rescan had been
aborted by a previous shutdown, the rescan would never be resumed.
This issue would manifest itself as several btrfs ioctl(2)s causing the
entire machine to hang when btrfs_qgroup_wait_for_completion was hit
(due to the fs_info->qgroup_rescan_running flag being set but the rescan
itself not being resumed). Notably, Docker's btrfs storage driver makes
regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT
(causing this problem to be manifested on boot for some machines).
Cc: <stable@vger.kernel.org> # v3.11+
Cc: Jeff Mahoney <jeffm@suse.com>
Fixes: b382a324b6 ("Btrfs: fix qgroup rescan resume on mount")
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Repeating the same computation in multiple places is not
necessary.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When called with a struct share_check, find_parent_nodes()
will detect a shared extent and immediately return with
BACKREF_SHARED_FOUND.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since backref resolution is CPU-intensive, the cond_resched calls
should help alleviate soft lockup occurences.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds a tracepoint event for prelim_ref insertion and
merging. For each, the ref being inserted or merged and the count
of tree nodes is issued.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds counters to each of the rbtrees so that we can tell
how large they are growing for a given workload. These counters
will be exported by tracepoints in the next patch.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's been known for a while that the use of multiple lists
that are periodically merged was an algorithmic problem within
btrfs. There are several workloads that don't complete in any
reasonable amount of time (e.g. btrfs/130) and others that cause
soft lockups.
The solution is to use a set of rbtrees that do insertion merging
for both indirect and direct refs, with the former converting
refs into the latter. The result is a btrfs/130 workload that
used to take several hours now takes about half of that. This
runtime still isn't acceptable and a future patch will address that
by moving the rbtrees higher in the stack so the lookups can be
shared across multiple calls to find_parent_nodes.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit afce772e87 ("btrfs: fix check_shared for fiemap ioctl") added
the ref_tree code in backref.c to reduce backref searching for
shared extents under the FIEMAP ioctl. This code will not be
compatible with the upcoming rbtree changes for improved backref
searching, so this patch removes the ref_tree code. The rbtree
changes will provide the equivalent functionality for FIEMAP.
The above commit also introduced transaction semantics around calls to
btrfs_check_shared() in order to accurately account for delayed refs.
This functionality needs to be retained, so a complete revert of the
above commit is not desirable. This patch therefore removes the
ref_tree portion of the commit as above, however it does not remove
the transaction portion.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit afce772e87 ("btrfs: fix check_shared for fiemap ioctl") added
transaction semantics around calls to btrfs_check_shared() in order to
provide accurate accounting of delayed refs. The transaction management
should be done inside btrfs_check_shared(), so that callers do not need
to manage transactions individually.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We typically use __ to indicate a helper routine that shouldn't be
called directly without understanding the proper context required
to do so. We use static functions to indicate that a function is
private to a particular C file. The backref code uses static
function and __ prefixes on nearly everything, which makes the code
difficult to read and establishes a pattern for future code that
shouldn't be followed. This patch drops all the unnecessary prefixes.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replacing the double cast and ternary conditional with a helper makes
the code easier on the eyes.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tracepoint arguments are all read-only. If we mark the arguments
as const, we're able to keep or convert those arguments to const
where appropriate.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have reader helpers for most of the on-disk structures that use
an extent_buffer and pointer as offset into the buffer that are
read-only. We should mark them as const and, in turn, allow consumers
of these interfaces to mark the buffers const as well.
No impact on code, but serves as documentation that a buffer is intended
not to be modified.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The sectorsize member of btrfs_block_group_cache is unused. So remove it, this
reduces the number of holes in the struct.
With patch:
/* size: 856, cachelines: 14, members: 40 */
/* sum members: 837, holes: 4, sum holes: 19 */
/* bit holes: 1, sum bit holes: 29 bits */
/* last cacheline: 24 bytes */
Without patch:
/* size: 864, cachelines: 14, members: 41 */
/* sum members: 841, holes: 5, sum holes: 23 */
/* bit holes: 1, sum bit holes: 29 bits */
/* last cacheline: 32 bytes */
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_alloc_chunk contains code which boils down to:
ndevs = min(ndevs, devs_max)
It's conditional upon devs_max not being 0. However, it cannot really be 0
since it's always set to either BTRFS_MAX_DEVS_SYS_CHUNK or
BTRFS_MAX_DEVS(fs_info->chunk_root). So eliminate the condition check and use
min explicitly. This has no functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes, just make the loop a bit more readable
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add zstd compression and decompression support to BtrFS. zstd at its
fastest level compresses almost as well as zlib, while offering much
faster compression and decompression, approaching lzo speeds.
I benchmarked btrfs with zstd compression against no compression, lzo
compression, and zlib compression. I benchmarked two scenarios. Copying
a set of files to btrfs, and then reading the files. Copying a tarball
to btrfs, extracting it to btrfs, and then reading the extracted files.
After every operation, I call `sync` and include the sync time.
Between every pair of operations I unmount and remount the filesystem
to avoid caching. The benchmark files can be found in the upstream
zstd source repository under
`contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}`
[1] [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.
The first compression benchmark is copying 10 copies of the unzipped
Silesia corpus [3] into a BtrFS filesystem mounted with
`-o compress-force=Method`. The decompression benchmark times how long
it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is
measured by comparing the output of `df` and `du`. See the benchmark file
[1] for details. I benchmarked multiple zstd compression levels, although
the patch uses zstd level 1.
| Method | Ratio | Compression MB/s | Decompression speed |
|---------|-------|------------------|---------------------|
| None | 0.99 | 504 | 686 |
| lzo | 1.66 | 398 | 442 |
| zlib | 2.58 | 65 | 241 |
| zstd 1 | 2.57 | 260 | 383 |
| zstd 3 | 2.71 | 174 | 408 |
| zstd 6 | 2.87 | 70 | 398 |
| zstd 9 | 2.92 | 43 | 406 |
| zstd 12 | 2.93 | 21 | 408 |
| zstd 15 | 3.01 | 11 | 354 |
The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it
measures the compression ratio, extracts the tar, and deletes the tar.
Then it measures the compression ratio again, and `tar`s the extracted
files into `/dev/null`. See the benchmark file [2] for details.
| Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) |
|--------|-----------|---------------|----------|------------|----------|
| None | 0.97 | 0.78 | 0.981 | 5.501 | 8.807 |
| lzo | 2.06 | 1.38 | 1.631 | 8.458 | 8.585 |
| zlib | 3.40 | 1.86 | 7.750 | 21.544 | 11.744 |
| zstd 1 | 3.57 | 1.85 | 2.579 | 11.479 | 9.389 |
[1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from David Sterba:
"Fixes addressing problems reported by users, and there's one more
regression fix"
* 'for-4.13-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: round down size diff when shrinking/growing device
Btrfs: fix early ENOSPC due to delalloc
btrfs: fix lockup in find_free_extent with read-only block groups
Btrfs: fix dir item validation when replaying xattr deletes
Further testing showed that the fix introduced in 7dfb8be11b ("btrfs:
Round down values which are written for total_bytes_size") was
insufficient and it could still lead to discrepancies between the
total_bytes in the super block and the device total bytes. So this patch
also ensures that the difference between old/new sizes when
shrinking/growing is also rounded down. This ensure that we won't be
subtracting/adding a non-sectorsize multiples to the superblock/device
total sizees.
Fixes: 7dfb8be11b ("btrfs: Round down values which are written for total_bytes_size")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a lot of metadata is reserved for outstanding delayed allocations, we
rely on shrink_delalloc() to reclaim metadata space in order to fulfill
reservation tickets. However, shrink_delalloc() has a shortcut where if
it determines that space can be overcommitted, it will stop early. This
made sense before the ticketed enospc system, but now it means that
shrink_delalloc() will often not reclaim enough space to fulfill any
tickets, leading to an early ENOSPC. (Reservation tickets don't care
about being able to overcommit, they need every byte accounted for.)
Fix it by getting rid of the shortcut so that shrink_delalloc() reclaims
all of the metadata it is supposed to. This fixes early ENOSPCs we were
seeing when doing a btrfs receive to populate a new filesystem, as well
as early ENOSPCs Christoph saw when doing a big cp -r onto Btrfs.
Fixes: 957780eb27 ("Btrfs: introduce ticketed enospc infrastructure")
Tested-by: Christoph Anton Mitterer <mail@christoph.anton.mitterer.name>
Cc: stable@vger.kernel.org
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have a block group that is all of the following:
1) uncached in memory
2) is read-only
3) has a disk cache state that indicates we need to recreate the cache
AND the file system has enough free space fragmentation such that the
request for an extent of a given size can't be honored;
AND have a single CPU core;
AND it's the block group with the highest starting offset such that
there are no opportunities (like reading from disk) for the loop to
yield the CPU;
We can end up with a lockup.
The root cause is simple. Once we're in the position that we've read in
all of the other block groups directly and none of those block groups
can honor the request, there are no more opportunities to sleep. We end
up trying to start a caching thread which never gets run if we only have
one core. This *should* present as a hung task waiting on the caching
thread to make some progress, but it doesn't. Instead, it degrades into
a busy loop because of the placement of the read-only check.
During the first pass through the loop, block_group->cached will be set
to BTRFS_CACHE_STARTED and have_caching_bg will be set. Then we hit the
read-only check and short circuit the loop. We're not yet in
LOOP_CACHING_WAIT, so we skip that loop back before going through the
loop again for other raid groups.
Then we move to LOOP_CACHING_WAIT state.
During the this pass through the loop, ->cached will still be
BTRFS_CACHE_STARTED, which means it's not cached, so we'll enter
cache_block_group, do a lot of nothing, and return, and also set
have_caching_bg again. Then we hit the read-only check and short circuit
the loop. The same thing happens as before except now we DO trigger
the LOOP_CACHING_WAIT && have_caching_bg check and loop back up to the
top. We do this forever.
There are two fixes in this patch since they address the same underlying
bug.
The first is to add a cond_resched to the end of the loop to ensure
that the caching thread always has an opportunity to run. This will
fix the soft lockup issue, but find_free_extent will still loop doing
nothing until the thread has completed.
The second is to move the read-only check to the top of the loop. We're
never going to return an allocation within a read-only block group so
we may as well skip it early. The check for ->cached == BTRFS_CACHE_ERROR
would cause the same problem except that BTRFS_CACHE_ERROR is considered
a "done" state and we won't re-set have_caching_bg again.
Many thanks to Stephan Kulow <coolo@suse.de> for his excellent help in
the testing process.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were passing an incorrect slot number to the function that validates
directory items when we are replaying xattr deletes from a log tree. The
correct slot is stored at variable 'i' and not at 'path->slots[0]', so
the call to the validation function was only correct for the first
iteration of the loop, when 'i == path->slots[0]'.
After this fix, the fstest generic/066 passes again.
Fixes: 8ee8c2d62d ("btrfs: Verify dir_item in replay_xattr_deletes")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
Pull btrfs fixes from David Sterba:
"We've identified and fixed a silent corruption (introduced by code in
the first pull), a fixup after the blk_status_t merge and two fixes to
incremental send that Filipe has been hunting for some time"
* 'for-4.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix unexpected return value of bio_readpage_error
btrfs: btrfs_create_repair_bio never fails, skip error handling
btrfs: cloned bios must not be iterated by bio_for_each_segment_all
Btrfs: fix write corruption due to bio cloning on raid5/6
Btrfs: incremental send, fix invalid memory access
Btrfs: incremental send, fix invalid path for link commands
With blk_status_t conversion (that are now present in master),
bio_readpage_error() may return 1 as now ->submit_bio_hook() may not set
%ret if it runs without problems.
This fixes that unexpected return value by changing
btrfs_check_repairable() to return a bool instead of updating %ret, and
patch is applicable to both codebases with and without blk_status_t.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As the function uses the non-failing bio allocation, we can remove error
handling from the callers as well.
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've started using cloned bios more in 4.13, there are some specifics
regarding the iteration. Filipe found [1] that the raid56 iterated a
cloned bio using bio_for_each_segment_all, which is incorrect. The
cloned bios have wrong bi_vcnt and this could lead to silent
corruptions. This patch adds assertions to all remaining
bio_for_each_segment_all cases.
[1] https://patchwork.kernel.org/patch/9838535/
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fix from David Sterba:
"This fixes a user-visible bug introduced by the nowait-aio patches
merged in this cycle"
* 'nowait-aio-btrfs-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: nowait aio: Correct assignment of pos
Assigning pos for usage early messes up in append mode, where the pos is
re-assigned in generic_write_checks(). Assign pos later to get the
correct position to write from iocb->ki_pos.
Since check_can_nocow also uses the value of pos, we shift
generic_write_checks() before check_can_nocow(). Checks with IOCB_DIRECT
are present in generic_write_checks(), so checking for IOCB_NOWAIT is
enough.
Also, put locking sequence in the fast path.
This fixes a user visible bug, as reported:
"apparently breaks several shell related features on my system.
In zsh history stopped working, because no new entries are added
anymore.
I fist noticed the issue when I tried to build mplayer. It uses a shell
script to generate a help_mp.h file:
[...]
Here is a simple testcase:
% echo "foo" >> test
% echo "foo" >> test
% cat test
foo
%
"
Fixes: edf064e7c6 ("btrfs: nowait aio support")
CC: Jens Axboe <axboe@kernel.dk>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: https://lkml.kernel.org/r/20170704042306.GA274@x4
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
When doing an incremental send, while processing an extent that changed
between the parent and send snapshots and that extent was an inline extent
in the parent snapshot, it's possible to access a memory region beyond
the end of leaf if the inline extent is very small and it is the first
item in a leaf.
An example scenario is described below.
The send snapshot has the following leaf:
leaf 33865728 items 33 free space 773 generation 46 owner 5
fs uuid ab7090d8-dafd-4fb9-9246-723b6d2e2fb7
chunk uuid 2d16478c-c704-4ab9-b574-68bff2281b1f
(...)
item 14 key (335 EXTENT_DATA 0) itemoff 3052 itemsize 53
generation 36 type 1 (regular)
extent data disk byte 12791808 nr 4096
extent data offset 0 nr 4096 ram 4096
extent compression 0 (none)
item 15 key (335 EXTENT_DATA 8192) itemoff 2999 itemsize 53
generation 36 type 1 (regular)
extent data disk byte 138170368 nr 225280
extent data offset 0 nr 225280 ram 225280
extent compression 0 (none)
(...)
And the parent snapshot has the following leaf:
leaf 31272960 items 17 free space 17 generation 31 owner 5
fs uuid ab7090d8-dafd-4fb9-9246-723b6d2e2fb7
chunk uuid 2d16478c-c704-4ab9-b574-68bff2281b1f
item 0 key (335 EXTENT_DATA 0) itemoff 3951 itemsize 44
generation 31 type 0 (inline)
inline extent data size 23 ram_bytes 613 compression 1 (zlib)
(...)
When computing the send stream, it is detected that the extent of inode
335, at file offset 0, and at fs/btrfs/send.c:is_extent_unchanged() we
grab the leaf from the parent snapshot and access the inline extent item.
However, before jumping to the 'out' label, we access the 'offset' and
'disk_bytenr' fields of the extent item, which should not be done for
inline extents since the inlined data starts at the offset of the
'disk_bytenr' field and can be very small. For example accessing the
'offset' field of the file extent item results in the following trace:
[ 599.705368] general protection fault: 0000 [#1] PREEMPT SMP
[ 599.706296] Modules linked in: btrfs psmouse i2c_piix4 ppdev acpi_cpufreq serio_raw parport_pc i2c_core evdev tpm_tis tpm_tis_core sg pcspkr parport tpm button su$
[ 599.709340] CPU: 7 PID: 5283 Comm: btrfs Not tainted 4.10.0-rc8-btrfs-next-46+ #1
[ 599.709340] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 599.709340] task: ffff88023eedd040 task.stack: ffffc90006658000
[ 599.709340] RIP: 0010:read_extent_buffer+0xdb/0xf4 [btrfs]
[ 599.709340] RSP: 0018:ffffc9000665ba00 EFLAGS: 00010286
[ 599.709340] RAX: db73880000000000 RBX: 0000000000000000 RCX: 0000000000000001
[ 599.709340] RDX: ffffc9000665ba60 RSI: db73880000000000 RDI: ffffc9000665ba5f
[ 599.709340] RBP: ffffc9000665ba30 R08: 0000000000000001 R09: ffff88020dc5e098
[ 599.709340] R10: 0000000000001000 R11: 0000160000000000 R12: 6db6db6db6db6db7
[ 599.709340] R13: ffff880000000000 R14: 0000000000000000 R15: ffff88020dc5e088
[ 599.709340] FS: 00007f519555a8c0(0000) GS:ffff88023f3c0000(0000) knlGS:0000000000000000
[ 599.709340] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 599.709340] CR2: 00007f1411afd000 CR3: 0000000235f8e000 CR4: 00000000000006e0
[ 599.709340] Call Trace:
[ 599.709340] btrfs_get_token_64+0x93/0xce [btrfs]
[ 599.709340] ? printk+0x48/0x50
[ 599.709340] btrfs_get_64+0xb/0xd [btrfs]
[ 599.709340] process_extent+0x3a1/0x1106 [btrfs]
[ 599.709340] ? btree_read_extent_buffer_pages+0x5/0xef [btrfs]
[ 599.709340] changed_cb+0xb03/0xb3d [btrfs]
[ 599.709340] ? btrfs_get_token_32+0x7a/0xcc [btrfs]
[ 599.709340] btrfs_compare_trees+0x432/0x53d [btrfs]
[ 599.709340] ? process_extent+0x1106/0x1106 [btrfs]
[ 599.709340] btrfs_ioctl_send+0x960/0xe26 [btrfs]
[ 599.709340] btrfs_ioctl+0x181b/0x1fed [btrfs]
[ 599.709340] ? trace_hardirqs_on_caller+0x150/0x1ac
[ 599.709340] vfs_ioctl+0x21/0x38
[ 599.709340] ? vfs_ioctl+0x21/0x38
[ 599.709340] do_vfs_ioctl+0x611/0x645
[ 599.709340] ? rcu_read_unlock+0x5b/0x5d
[ 599.709340] ? __fget+0x6d/0x79
[ 599.709340] SyS_ioctl+0x57/0x7b
[ 599.709340] entry_SYSCALL_64_fastpath+0x18/0xad
[ 599.709340] RIP: 0033:0x7f51945eec47
[ 599.709340] RSP: 002b:00007ffc21c13e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 599.709340] RAX: ffffffffffffffda RBX: ffffffff81096459 RCX: 00007f51945eec47
[ 599.709340] RDX: 00007ffc21c13f20 RSI: 0000000040489426 RDI: 0000000000000004
[ 599.709340] RBP: ffffc9000665bf98 R08: 00007f519450d700 R09: 00007f519450d700
[ 599.709340] R10: 00007f519450d9d0 R11: 0000000000000202 R12: 0000000000000046
[ 599.709340] R13: ffffc9000665bf78 R14: 0000000000000000 R15: 00007f5195574040
[ 599.709340] ? trace_hardirqs_off_caller+0x43/0xb1
[ 599.709340] Code: 29 f0 49 39 d8 4c 0f 47 c3 49 03 81 58 01 00 00 44 89 c1 4c 01 c2 4c 29 c3 48 c1 f8 03 49 0f af c4 48 c1 e0 0c 4c 01 e8 48 01 c6 <f3> a4 31 f6 4$
[ 599.709340] RIP: read_extent_buffer+0xdb/0xf4 [btrfs] RSP: ffffc9000665ba00
[ 599.762057] ---[ end trace fe00d7af61b9f49e ]---
This is because the 'offset' field starts at an offset of 37 bytes
(offsetof(struct btrfs_file_extent_item, offset)), has a length of 8
bytes and therefore attemping to read it causes a 1 byte access beyond
the end of the leaf, as the first item's content in a leaf is located
at the tail of the leaf, the item size is 44 bytes and the offset of
that field plus its length (37 + 8 = 45) goes beyond the item's size
by 1 byte.
So fix this by accessing the 'offset' and 'disk_bytenr' fields after
jumping to the 'out' label if we are processing an inline extent. We
move the reading operation of the 'disk_bytenr' field too because we
have the same problem as for the 'offset' field explained above when
the inline data is less then 8 bytes. The access to the 'generation'
field is also moved but just for the sake of grouping access to all
the fields.
Fixes: e1cbfd7bf6 ("Btrfs: send, fix file hole not being preserved due to inline extent")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In some scenarios an incremental send stream can contain link commands
with an invalid target path. Such scenarios happen after moving some
directory inode A, renaming a regular file inode B into the old name of
inode A and finally creating a new hard link for inode B at directory
inode A.
Consider the following example scenario where this issue happens.
Parent snapshot:
. (ino 256)
|
|--- dir1/ (ino 257)
| |--- dir2/ (ino 258)
| |--- dir3/ (ino 259)
| |--- file1 (ino 261)
| |--- dir4/ (ino 262)
|
|--- dir5/ (ino 260)
Send snapshot:
. (ino 256)
|
|--- dir1/ (ino 257)
|--- dir2/ (ino 258)
| |--- dir3/ (ino 259)
| |--- dir4 (ino 261)
|
|--- dir6/ (ino 263)
|--- dir44/ (ino 262)
|--- file11 (ino 261)
|--- dir55/ (ino 260)
When attempting to apply the corresponding incremental send stream, a
link command contains an invalid target path which makes the receiver
fail. The following is the verbose output of the btrfs receive command:
receiving snapshot mysnap2 uuid=90076fe6-5ba6-e64a-9321-9279670ed16b (...)
utimes
utimes dir1
utimes dir1/dir2/dir3
utimes
rename dir1/dir2/dir3/dir4 -> o262-7-0
link dir1/dir2/dir3/dir4 -> dir1/dir2/dir3/file1
link dir1/dir2/dir3/dir4/file11 -> dir1/dir2/dir3/file1
ERROR: link dir1/dir2/dir3/dir4/file11 -> dir1/dir2/dir3/file1 failed: Not a directory
The following steps happen during the computation of the incremental send
stream the lead to this issue:
1) When processing inode 261, we orphanize inode 262 due to a name/location
collision with one of the new hard links for inode 261 (created in the
second step below).
2) We create one of the 2 new hard links for inode 261, the one whose
location is at "dir1/dir2/dir3/dir4".
3) We then attempt to create the other new hard link for inode 261, which
has inode 262 as its parent directory. Because the path for this new
hard link was computed before we started processing the new references
(hard links), it reflects the old name/location of inode 262, that is,
it does not account for the orphanization step that happened when
we started processing the new references for inode 261, whence it is
no longer valid, causing the receiver to fail.
So fix this issue by recomputing the full path of new references if we
ended up orphanizing other inodes which are directories.
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Pull percpu updates from Tejun Heo:
"These are the percpu changes for the v4.13-rc1 merge window. There are
a couple visibility related changes - tracepoints and allocator stats
through debugfs, along with __ro_after_init markings and a cosmetic
rename in percpu_counter.
Please note that the simple O(#elements_in_the_chunk) area allocator
used by percpu allocator is again showing scalability issues,
primarily with bpf allocating and freeing large number of counters.
Dennis is working on the replacement allocator and the percpu
allocator will be seeing increased churns in the coming cycles"
* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: fix static checker warnings in pcpu_destroy_chunk
percpu: fix early calls for spinlock in pcpu_stats
percpu: resolve err may not be initialized in pcpu_alloc
percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch
percpu: add tracepoint support for percpu memory
percpu: expose statistics about percpu memory via debugfs
percpu: migrate percpu data structures to internal header
percpu: add missing lockdep_assert_held to func pcpu_free_area
mark most percpu globals as __ro_after_init
Just check and advance the errseq_t in the file before returning, and
use an errseq_t based check for writeback errors.
Other internal callers of filemap_* functions are left as-is.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
btrfs, debugfs, reiserfs and tracefs call save_mount_options() and reiserfs
calls replace_mount_options(), but they then implement their own
->show_options() methods and don't touch s_options, rendering the saved
options unnecessary. I'm trying to eliminate s_options to make it easier
to implement a context-based mount where the mount options can be passed
individually over a file descriptor.
Remove the calls to save/replace_mount_options() call in these cases.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chris Mason <clm@fb.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Steven Rostedt <rostedt@goodmis.org>
cc: linux-btrfs@vger.kernel.org
cc: reiserfs-devel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull btrfs updates from David Sterba:
"The core updates improve error handling (mostly related to bios), with
the usual incremental work on the GFP_NOFS (mis)use removal,
refactoring or cleanups. Except the two top patches, all have been in
for-next for an extensive amount of time.
User visible changes:
- statx support
- quota override tunable
- improved compression thresholds
- obsoleted mount option alloc_start
Core updates:
- bio-related updates:
- faster bio cloning
- no allocation failures
- preallocated flush bios
- more kvzalloc use, memalloc_nofs protections, GFP_NOFS updates
- prep work for btree_inode removal
- dir-item validation
- qgoup fixes and updates
- cleanups:
- removed unused struct members, unused code, refactoring
- argument refactoring (fs_info/root, caller -> callee sink)
- SEARCH_TREE ioctl docs"
* 'for-4.13-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits)
btrfs: Remove false alert when fiemap range is smaller than on-disk extent
btrfs: Don't clear SGID when inheriting ACLs
btrfs: fix integer overflow in calc_reclaim_items_nr
btrfs: scrub: fix target device intialization while setting up scrub context
btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges
btrfs: qgroup: Introduce extent changeset for qgroup reserve functions
btrfs: qgroup: Fix qgroup reserved space underflow caused by buffered write and quotas being enabled
btrfs: qgroup: Return actually freed bytes for qgroup release or free data
btrfs: qgroup: Cleanup btrfs_qgroup_prepare_account_extents function
btrfs: qgroup: Add quick exit for non-fs extents
Btrfs: rework delayed ref total_bytes_pinned accounting
Btrfs: return old and new total ref mods when adding delayed refs
Btrfs: always account pinned bytes when dropping a tree block ref
Btrfs: update total_bytes_pinned when pinning down extents
Btrfs: make BUG_ON() in add_pinned_bytes() an ASSERT()
Btrfs: make add_pinned_bytes() take an s64 num_bytes instead of u64
btrfs: fix validation of XATTR_ITEM dir items
btrfs: Verify dir_item in iterate_object_props
btrfs: Check name_len before in btrfs_del_root_ref
btrfs: Check name_len before reading btrfs_get_name
...
Pull core block/IO updates from Jens Axboe:
"This is the main pull request for the block layer for 4.13. Not a huge
round in terms of features, but there's a lot of churn related to some
core cleanups.
Note this depends on the UUID tree pull request, that Christoph
already sent out.
This pull request contains:
- A series from Christoph, unifying the error/stats codes in the
block layer. We now use blk_status_t everywhere, instead of using
different schemes for different places.
- Also from Christoph, some cleanups around request allocation and IO
scheduler interactions in blk-mq.
- And yet another series from Christoph, cleaning up how we handle
and do bounce buffering in the block layer.
- A blk-mq debugfs series from Bart, further improving on the support
we have for exporting internal information to aid debugging IO
hangs or stalls.
- Also from Bart, a series that cleans up the request initialization
differences across types of devices.
- A series from Goldwyn Rodrigues, allowing the block layer to return
failure if we will block and the user asked for non-blocking.
- Patch from Hannes for supporting setting loop devices block size to
that of the underlying device.
- Two series of patches from Javier, fixing various issues with
lightnvm, particular around pblk.
- A series from me, adding support for write hints. This comes with
NVMe support as well, so applications can help guide data placement
on flash to improve performance, latencies, and write
amplification.
- A series from Ming, improving and hardening blk-mq support for
stopping/starting and quiescing hardware queues.
- Two pull requests for NVMe updates. Nothing major on the feature
side, but lots of cleanups and bug fixes. From the usual crew.
- A series from Neil Brown, greatly improving the bio rescue set
support. Most notably, this kills the bio rescue work queues, if we
don't really need them.
- Lots of other little bug fixes that are all over the place"
* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
lightnvm: pblk: set line bitmap check under debug
lightnvm: pblk: verify that cache read is still valid
lightnvm: pblk: add initialization check
lightnvm: pblk: remove target using async. I/Os
lightnvm: pblk: use vmalloc for GC data buffer
lightnvm: pblk: use right metadata buffer for recovery
lightnvm: pblk: schedule if data is not ready
lightnvm: pblk: remove unused return variable
lightnvm: pblk: fix double-free on pblk init
lightnvm: pblk: fix bad le64 assignations
nvme: Makefile: remove dead build rule
blk-mq: map all HWQ also in hyperthreaded system
nvmet-rdma: register ib_client to not deadlock in device removal
nvme_fc: fix error recovery on link down.
nvmet_fc: fix crashes on bad opcodes
nvme_fc: Fix crash when nvme controller connection fails.
nvme_fc: replace ioabort msleep loop with completion
nvme_fc: fix double calls to nvme_cleanup_cmd()
nvme-fabrics: verify that a controller returns the correct NQN
nvme: simplify nvme_dev_attrs_are_visible
...
Commit 4751832da9 ("btrfs: fiemap: Cache and merge fiemap extent before
submit it to user") introduced a warning to catch unemitted cached
fiemap extent.
However such warning doesn't take the following case into consideration:
0 4K 8K
|<---- fiemap range --->|
|<----------- On-disk extent ------------------>|
In this case, the whole 0~8K is cached, and since it's larger than
fiemap range, it break the fiemap extent emit loop.
This leaves the fiemap extent cached but not emitted, and caught by the
final fiemap extent sanity check, causing kernel warning.
This patch removes the kernel warning and renames the sanity check to
emit_last_fiemap_cache() since it's possible and valid to have cached
fiemap extent.
Reported-by: David Sterba <dsterba@suse.cz>
Reported-by: Adam Borowski <kilobyte@angband.pl>
Fixes: 4751832da9 ("btrfs: fiemap: Cache and merge fiemap extent ...")
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.
Fix the problem by moving posix_acl_update_mode() out of
__btrfs_set_acl() into btrfs_set_acl(). That way the function will not be
called when inheriting ACLs which is what we want as it prevents SGID
bit clearing and the mode has been properly set by posix_acl_create()
anyway.
Fixes: 073931017b
CC: stable@vger.kernel.org
CC: linux-btrfs@vger.kernel.org
CC: David Sterba <dsterba@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
Dave Jones hit a WARN_ON(nr < 0) in btrfs_wait_ordered_roots() with
v4.12-rc6. This was because commit 70e7af244 made it possible for
calc_reclaim_items_nr() to return a negative number. It's not really a
bug in that commit, it just didn't go far enough down the stack to find
all the possible 64->32 bit overflows.
This switches calc_reclaim_items_nr() to return a u64 and changes everyone
that uses the results of that math to u64 as well.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 70e7af2 ("Btrfs: fix delalloc accounting leak caused by u32 overflow")
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit "btrfs: scrub: inline helper scrub_setup_wr_ctx" inlined a
helper but wrongly sets up the target device. Incidentally there's a
local variable with the same name as a parameter in the previous
function, so this got caught during runtime as crash in test btrfs/027.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For the following case, btrfs can underflow qgroup reserved space
at an error path:
(Page size 4K, function name without "btrfs_" prefix)
Task A | Task B
----------------------------------------------------------------------
Buffered_write [0, 2K) |
|- check_data_free_space() |
| |- qgroup_reserve_data() |
| Range aligned to page |
| range [0, 4K) <<< |
| 4K bytes reserved <<< |
|- copy pages to page cache |
| Buffered_write [2K, 4K)
| |- check_data_free_space()
| | |- qgroup_reserved_data()
| | Range alinged to page
| | range [0, 4K)
| | Already reserved by A <<<
| | 0 bytes reserved <<<
| |- delalloc_reserve_metadata()
| | And it *FAILED* (Maybe EQUOTA)
| |- free_reserved_data_space()
|- qgroup_free_data()
Range aligned to page range
[0, 4K)
Freeing 4K
(Special thanks to Chandan for the detailed report and analyse)
[CAUSE]
Above Task B is freeing reserved data range [0, 4K) which is actually
reserved by Task A.
And at writeback time, page dirty by Task A will go through writeback
routine, which will free 4K reserved data space at file extent insert
time, causing the qgroup underflow.
[FIX]
For btrfs_qgroup_free_data(), add @reserved parameter to only free
data ranges reserved by previous btrfs_qgroup_reserve_data().
So in above case, Task B will try to free 0 byte, so no underflow.
Reported-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new parameter, struct extent_changeset for
btrfs_qgroup_reserved_data() and its callers.
Such extent_changeset was used in btrfs_qgroup_reserve_data() to record
which range it reserved in current reserve, so it can free it in error
paths.
The reason we need to export it to callers is, at buffered write error
path, without knowing what exactly which range we reserved in current
allocation, we can free space which is not reserved by us.
This will lead to qgroup reserved space underflow.
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Under the following case, we can underflow qgroup reserved space.
Task A | Task B
---------------------------------------------------------------
Quota disabled |
Buffered write |
|- btrfs_check_data_free_space() |
| *NO* qgroup space is reserved |
| since quota is *DISABLED* |
|- All pages are copied to page |
cache |
| Enable quota
| Quota scan finished
|
| Sync_fs
| |- run_delalloc_range
| |- Write pages
| |- btrfs_finish_ordered_io
| |- insert_reserved_file_extent
| |- btrfs_qgroup_release_data()
| Since no qgroup space is
reserved in Task A, we
underflow qgroup reserved
space
This can be detected by fstest btrfs/104.
[CAUSE]
In insert_reserved_file_extent() we tell qgroup to release the @ram_bytes
size of qgroup reserved_space in all cases.
And btrfs_qgroup_release_data() will check if quotas are enabled.
However in the above case, the buffered write happens before quota is
enabled, so we don't have the reserved space for that range.
[FIX]
In insert_reserved_file_extent(), we tell qgroup to release the acctual
byte number it released.
In the above case, since we don't have the reserved space, we tell
qgroups to release 0 byte, so the problem can be fixed.
And thanks to the @reserved parameter introduced by the qgroup rework,
and previous patch to return released bytes, the fix can be as small as
10 lines.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ changelog updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_qgroup_release/free_data() only returns 0 or a negative error
number (ENOMEM is the only possible error).
This is normally good enough, but sometimes we need the exact byte
count it freed/released.
Change it to return actually released/freed bytenr number instead of 0
for success.
And slightly modify related extent_changeset structure, since in btrfs
one no-hole data extent won't be larger than 128M, so "unsigned int"
is large enough for the use case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Quite a lot of qgroup corruption happens due to wrong time of calling
btrfs_qgroup_prepare_account_extents().
Since the safest time is to call it just before
btrfs_qgroup_account_extents(), there is no need to separate these 2
functions.
Merging them will make code cleaner and less bug prone.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ changelog and comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Modify btrfs_qgroup_account_extent() to exit quicker for non-fs extents.
The quick exit condition is:
1) The extent belongs to a non-fs tree
Only fs-tree extents can affect qgroup numbers and is the only case
where extent can be shared between different trees.
Although strictly speaking extent in data-reloc or tree-reloc tree
can be shared, data/tree-reloc root won't appear in the result of
btrfs_find_all_roots(), so we can ignore such case.
So we can check the first root in old_roots/new_roots ulist.
- if we find the 1st root is a not a fs/subvol root, then we can skip
the extent
- if we find the 1st root is a fs/subvol root, then we must continue
calculation
OR
2) both 'nr_old_roots' and 'nr_new_roots' are 0
This means either such extent got allocated then freed in current
transaction or it's a new reloc tree extent, whose nr_new_roots is 0.
Either way it won't affect qgroup accounting and can be skipped
safely.
Such quick exit can make trace output more quite and less confusing:
(example with fs uuid and time stamp removed)
Before:
------
add_delayed_tree_ref: bytenr=29556736 num_bytes=16384 action=ADD_DELAYED_REF parent=0(-) ref_root=2(EXTENT_TREE) level=0 type=TREE_BLOCK_REF seq=0
btrfs_qgroup_account_extent: bytenr=29556736 num_bytes=16384 nr_old_roots=0 nr_new_roots=1
------
Extent tree block will trigger btrfs_qgroup_account_extent() trace point
while no qgroup number is changed, as extent tree won't affect qgroup
accounting.
After:
------
add_delayed_tree_ref: bytenr=29556736 num_bytes=16384 action=ADD_DELAYED_REF parent=0(-) ref_root=2(EXTENT_TREE) level=0 type=TREE_BLOCK_REF seq=0
------
Now such unrelated extent won't trigger btrfs_qgroup_account_extent()
trace point, making the trace less noisy.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ changelog and comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
The total_bytes_pinned counter is completely broken when accounting
delayed refs:
- If two drops for the same extent are merged, we will decrement
total_bytes_pinned twice but only increment it once.
- If an add is merged into a drop or vice versa, we will decrement the
total_bytes_pinned counter but never increment it.
- If multiple references to an extent are dropped, we will account it
multiple times, potentially vastly over-estimating the number of bytes
that will be freed by a commit and doing unnecessary work when we're
close to ENOSPC.
The last issue is relatively minor, but the first two make the
total_bytes_pinned counter leak or underflow very often. These
accounting issues were introduced in b150a4f10d ("Btrfs: use a percpu
to keep track of possibly pinned bytes"), but they were papered over by
zeroing out the counter on every commit until d288db5dc0 ("Btrfs: fix
race of using total_bytes_pinned").
We need to make sure that an extent is accounted as pinned exactly once
if and only if we will drop references to it when when the transaction
is committed. Ideally we would only add to total_bytes_pinned when the
*last* reference is dropped, but this information isn't readily
available for data extents. Again, this over-estimation can lead to
extra commits when we're close to ENOSPC, but it's not as bad as before.
The fix implemented here is to increment total_bytes_pinned when the
total refmod count for an extent goes negative and decrement it if the
refmod count goes back to non-negative or after we've run all of the
delayed refs for that extent.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need this to decide when to account pinned bytes.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we only increment total_bytes_pinned in
btrfs_free_tree_block() when dropping the last reference on the block.
However, when the delayed ref is run later, we will decrement
total_bytes_pinned regardless of whether it was the last reference or
not. This causes the counter to underflow when the reference we dropped
was not the last reference. Fix it by incrementing the counter
unconditionally, which is what btrfs_free_extent() does. This makes
total_bytes_pinned an overestimate when references to shared extents are
dropped, but in the worst case this will just make us try to commit the
transaction to try to free up space and find we didn't free enough.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extents marked in pin_down_extent() will be unpinned later in
unpin_extent_range(), which decrements total_bytes_pinned.
pin_down_extent() must increment the counter to avoid underflowing it.
Also adjust btrfs_free_tree_block() to avoid accounting for the same
extent twice.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of flags is one of DATA/METADATA/SYSTEM, they must exist at
when add_pinned_bytes is called.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few places where we pass in a negative num_bytes, so make it
signed for clarity. Also move it up in the file since later patches will
need it there.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The XATTR_ITEM is a type of a directory item so we use the common
validator helper. Unlike other dir items, it can have data. The way the
name len validation is currently implemented does not reflect that. We'd
have to adjust by the data_len when comparing the read and item limits.
However, this will not work for multi-item xattr dir items.
Example from tree dump of generic/337:
item 7 key (257 XATTR_ITEM 751495445) itemoff 15667 itemsize 147
location key (0 UNKNOWN.0 0) type XATTR
transid 8 data_len 3 name_len 11
name: user.foobar
data 123
location key (0 UNKNOWN.0 0) type XATTR
transid 8 data_len 6 name_len 13
name: user.WvG1c1Td
data qwerty
location key (0 UNKNOWN.0 0) type XATTR
transid 8 data_len 5 name_len 19
name: user.J3__T_Km3dVsW_
data hello
At the point of btrfs_is_name_len_valid call we don't have access to the
data_len value of the 2nd and 3rd sub-item. So simple btrfs_dir_data_len(leaf,
di) would always return 3, although we'd need to get 6 and 5 respectively to
get the claculations right. (read_end + name_len + data_len vs item_end)
We'd have to also pass data_len externally, which is not point of the
name validation. The last check is supposed to test if there's at least
one dir item space after the one we're processing. I don't think this is
particularly useful, validation of the next item would catch that too.
So the check is removed and we don't weaken the validation. Now tests
btrfs/048, btrfs/053, generic/273 and generic/337 pass.
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call verify_dir_item before memcmp_extent_buffer reading name from
dir_item.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_del_root_ref calls btrfs_search_slot and reads name from root_ref.
Call btrfs_is_name_len_valid before memcmp.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_get_name, there's btrfs_search_slot and reads name from
inode_ref/root_ref.
Call btrfs_is_name_len_valid in btrfs_get_name.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since iterate_dir_item checks name_len in its own way,
so use btrfs_is_name_len_valid not 'verify_dir_item' to make more strict
name_len check.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switched ENAMETOOLONG to EIO ]
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_log_inode, btrfs_search_forward gets the buffer and then
btrfs_check_ref_name_override will read name from ref/extref for the
first time.
Call btrfs_is_name_len_valid before reading name.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
replay_xattr_deletes calls btrfs_search_slot to get buffer and reads
name.
Call verify_dir_item to check name_len in replay_xattr_deletes to avoid
reading out of boundary.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
replay_one_buffer first reads buffers and dispatches items accroding to
the item type.
In this patch, add_inode_ref handles inode_ref and inode_extref.
Then add_inode_ref calls ref_get_fields and extref_get_fields to read
ref/extref name for the first time.
So checking name_len before reading those two is fine.
add_inode_ref also calls inode_in_dir to match ref/extref in parent_dir.
The call graph includes btrfs_match_dir_item_name to read dir_item name
in the parent dir.
Checking first dir_item is not enough. Change it to verify every
dir_item while doing matches.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce function btrfs_is_name_len_valid.
The function compares parameter @name_len with item boundary then
returns true if name_len is valid.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ s/btrfs_leaf_data/BTRFS_LEAF_DATA_OFFSET/ ]
Signed-off-by: David Sterba <dsterba@suse.com>
We should really just wait in wait_dev_flush and let the caller decide
what to do with the error value.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to what submit_bio_wait does, we should account for IO while
waiting for a bio completion. This has marginal visible effects, flush
bio is short-lived.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For devices that support flushing, we allocate a bio, submit, wait for
it and then free it. The bio allocation does not fail so ENOMEM is not a
problem but we still may unnecessarily stress the allocation subsystem.
Instead, we can allocate the bio at the same time we allocate the device
and reuse it each time we need to flush the barriers. The bio is reset
before each use. Reference counting is simplified to just device
allocation (get) and freeing (put).
The bio used to be submitted through the integrity checker which will
find out that bio has no data attached and call submit_bio.
Status of the bio in flight needs to be tracked separately in case the
device caches get switched off between write and wait.
Signed-off-by: David Sterba <dsterba@suse.com>
An incremental send can contain unlink operations with an invalid target
path when we rename some directory inode A, then rename some file inode B
to the old name of inode A and directory inode A is an ancestor of inode B
in the parent snapshot (but not anymore in the send snapshot).
Consider the following example scenario where this issue happens.
Parent snapshot:
. (ino 256)
|
|--- dir1/ (ino 257)
|--- dir2/ (ino 258)
| |--- file1 (ino 259)
| |--- file3 (ino 261)
|
|--- dir3/ (ino 262)
|--- file22 (ino 260)
|--- dir4/ (ino 263)
Send snapshot:
. (ino 256)
|
|--- dir1/ (ino 257)
|--- dir2/ (ino 258)
|--- dir3 (ino 260)
|--- file3/ (ino 262)
|--- dir4/ (ino 263)
|--- file11 (ino 269)
|--- file33 (ino 261)
When attempting to apply the corresponding incremental send stream, an
unlink operation contains an invalid path which makes the receiver fail.
The following is verbose output of the btrfs receive command:
receiving snapshot snap2 uuid=7d5450da-a573-e043-a451-ec85f4879f0f (...)
utimes
utimes dir1
utimes dir1/dir2
link dir1/dir3/dir4/file11 -> dir1/dir2/file1
unlink dir1/dir2/file1
utimes dir1/dir2
truncate dir1/dir3/dir4/file11 size=0
utimes dir1/dir3/dir4/file11
rename dir1/dir3 -> o262-7-0
link dir1/dir3 -> o262-7-0/file22
unlink dir1/dir3/file22
ERROR: unlink dir1/dir3/file22 failed. Not a directory
The following steps happen during the computation of the incremental send
stream the lead to this issue:
1) Before we start processing the new and deleted references for inode
260, we compute the full path of the deleted reference
("dir1/dir3/file22") and cache it in the list of deleted references
for our inode.
2) We then start processing the new references for inode 260, for which
there is only one new, located at "dir1/dir3". When processing this
new reference, we check that inode 262, which was not yet processed,
collides with the new reference and because of that we orphanize
inode 262 so its new full path becomes "o262-7-0".
3) After the orphanization of inode 262, we create the new reference for
inode 260 by issuing a link command with a target path of "dir1/dir3"
and a source path of "o262-7-0/file22".
4) We then start processing the deleted references for inode 260, for
which there is only one with the base name of "file22", and issue
an unlink operation containing the target path computed at step 1,
which is wrong because that path no longer exists and should be
replaced with "o262-7-0/file22".
So fix this issue by recomputing the full path of deleted references if
when we processed the new references for an inode we ended up orphanizing
any other inode that is an ancestor of our inode in the parent snapshot.
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[ adjusted after prev patch removed fs_path::dir_path and dir_path_len ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently an incremental snapshot can generate link operations which
contain an invalid target path. Such case happens when in the send
snapshot a file was renamed, a new hard link added for it and some
other inode (with a lower number) got renamed to the former name of
that file. Example:
Parent snapshot
. (ino 256)
|
|--- f1 (ino 257)
|--- f2 (ino 258)
|--- f3 (ino 259)
Send snapshot
. (ino 256)
|
|--- f2 (ino 257)
|--- f3 (ino 258)
|--- f4 (ino 259)
|--- f5 (ino 258)
The following steps happen when computing the incremental send stream:
1) When processing inode 257, inode 258 is orphanized (renamed to
"o258-7-0"), because its current reference has the same name as the
new reference for inode 257;
2) When processing inode 258, we iterate over all its new references,
which have the names "f3" and "f5". The first iteration sees name
"f5" and renames the inode from its orphan name ("o258-7-0") to
"f5", while the second iteration sees the name "f3" and, incorrectly,
issues a link operation with a target name matching the orphan name,
which no longer exists. The first iteration had reset the current
valid path of the inode to "f5", but in the second iteration we lost
it because we found another inode, with a higher number of 259, which
has a reference named "f3" as well, so we orphanized inode 259 and
recomputed the current valid path of inode 258 to its old orphan
name because inode 259 could be an ancestor of inode 258 and therefore
the current valid path could contain the pre-orphanization name of
inode 259. However in this case inode 259 is not an ancestor of inode
258 so the current valid path should not be recomputed.
This makes the receiver fail with the following error:
ERROR: link f3 -> o258-7-0 failed: No such file or directory
So fix this by not recomputing the current valid path for an inode
whenever we find a colliding reference from some not yet processed inode
(inode number higher then the one currently being processed), unless
that other inode is an ancestor of the one we are currently processing.
A test case for fstests will follow soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While punching a hole in a range that is not aligned with the sector size
(currently the same as the page size) we can end up leaving an extent map
in memory with a length that is smaller then the sector size or with a
start offset that is not aligned to the sector size. Both cases are not
expected and can lead to problems. This issue is easily detected
after the patch from commit a7e3b975a0 ("Btrfs: fix reported number of
inode blocks"), introduced in kernel 4.12-rc1, in a scenario like the
following for example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -c "pwrite -S 0xaa -b 100K 0 100K" /mnt/foo
$ xfs_io -c "fpunch 60K 90K" /mnt/foo
$ xfs_io -c "pwrite -S 0xbb -b 100K 50K 100K" /mnt/foo
$ xfs_io -c "pwrite -S 0xcc -b 50K 100K 50K" /mnt/foo
$ umount /mnt
After the unmount operation we can see several warnings emmitted due to
underflows related to space reservation counters:
[ 2837.443299] ------------[ cut here ]------------
[ 2837.447395] WARNING: CPU: 8 PID: 2474 at fs/btrfs/inode.c:9444 btrfs_destroy_inode+0xe8/0x27e [btrfs]
[ 2837.452108] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button se
rio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_gene
ric raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy
[ 2837.458389] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1
[ 2837.459754] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 2837.462379] Call Trace:
[ 2837.462379] dump_stack+0x68/0x92
[ 2837.462379] __warn+0xc2/0xdd
[ 2837.462379] warn_slowpath_null+0x1d/0x1f
[ 2837.462379] btrfs_destroy_inode+0xe8/0x27e [btrfs]
[ 2837.462379] destroy_inode+0x3d/0x55
[ 2837.462379] evict+0x177/0x17e
[ 2837.462379] dispose_list+0x50/0x71
[ 2837.462379] evict_inodes+0x132/0x141
[ 2837.462379] generic_shutdown_super+0x3f/0xeb
[ 2837.462379] kill_anon_super+0x12/0x1c
[ 2837.462379] btrfs_kill_super+0x16/0x21 [btrfs]
[ 2837.462379] deactivate_locked_super+0x30/0x68
[ 2837.462379] deactivate_super+0x36/0x39
[ 2837.462379] cleanup_mnt+0x58/0x76
[ 2837.462379] __cleanup_mnt+0x12/0x14
[ 2837.462379] task_work_run+0x77/0x9b
[ 2837.462379] prepare_exit_to_usermode+0x9d/0xc5
[ 2837.462379] syscall_return_slowpath+0x196/0x1b9
[ 2837.462379] entry_SYSCALL_64_fastpath+0xab/0xad
[ 2837.462379] RIP: 0033:0x7f3ef3e6b9a7
[ 2837.462379] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 2837.462379] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7
[ 2837.462379] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910
[ 2837.462379] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015
[ 2837.462379] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64
[ 2837.462379] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0
[ 2837.519355] ---[ end trace e79345fe24b30b8d ]---
[ 2837.596256] ------------[ cut here ]------------
[ 2837.597625] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:5699 btrfs_free_block_groups+0x246/0x3eb [btrfs]
[ 2837.603547] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy
[ 2837.659372] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1
[ 2837.663359] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 2837.663359] Call Trace:
[ 2837.663359] dump_stack+0x68/0x92
[ 2837.663359] __warn+0xc2/0xdd
[ 2837.663359] warn_slowpath_null+0x1d/0x1f
[ 2837.663359] btrfs_free_block_groups+0x246/0x3eb [btrfs]
[ 2837.663359] close_ctree+0x1dd/0x2e1 [btrfs]
[ 2837.663359] ? evict_inodes+0x132/0x141
[ 2837.663359] btrfs_put_super+0x15/0x17 [btrfs]
[ 2837.663359] generic_shutdown_super+0x6a/0xeb
[ 2837.663359] kill_anon_super+0x12/0x1c
[ 2837.663359] btrfs_kill_super+0x16/0x21 [btrfs]
[ 2837.663359] deactivate_locked_super+0x30/0x68
[ 2837.663359] deactivate_super+0x36/0x39
[ 2837.663359] cleanup_mnt+0x58/0x76
[ 2837.663359] __cleanup_mnt+0x12/0x14
[ 2837.663359] task_work_run+0x77/0x9b
[ 2837.663359] prepare_exit_to_usermode+0x9d/0xc5
[ 2837.663359] syscall_return_slowpath+0x196/0x1b9
[ 2837.663359] entry_SYSCALL_64_fastpath+0xab/0xad
[ 2837.663359] RIP: 0033:0x7f3ef3e6b9a7
[ 2837.663359] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 2837.663359] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7
[ 2837.663359] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910
[ 2837.663359] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015
[ 2837.663359] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64
[ 2837.663359] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0
[ 2837.739445] ---[ end trace e79345fe24b30b8e ]---
[ 2837.745595] ------------[ cut here ]------------
[ 2837.746412] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:5700 btrfs_free_block_groups+0x261/0x3eb [btrfs]
[ 2837.747955] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy
[ 2837.755395] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1
[ 2837.756769] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 2837.758526] Call Trace:
[ 2837.758925] dump_stack+0x68/0x92
[ 2837.759383] __warn+0xc2/0xdd
[ 2837.759383] warn_slowpath_null+0x1d/0x1f
[ 2837.759383] btrfs_free_block_groups+0x261/0x3eb [btrfs]
[ 2837.759383] close_ctree+0x1dd/0x2e1 [btrfs]
[ 2837.759383] ? evict_inodes+0x132/0x141
[ 2837.759383] btrfs_put_super+0x15/0x17 [btrfs]
[ 2837.759383] generic_shutdown_super+0x6a/0xeb
[ 2837.759383] kill_anon_super+0x12/0x1c
[ 2837.759383] btrfs_kill_super+0x16/0x21 [btrfs]
[ 2837.759383] deactivate_locked_super+0x30/0x68
[ 2837.759383] deactivate_super+0x36/0x39
[ 2837.759383] cleanup_mnt+0x58/0x76
[ 2837.759383] __cleanup_mnt+0x12/0x14
[ 2837.759383] task_work_run+0x77/0x9b
[ 2837.759383] prepare_exit_to_usermode+0x9d/0xc5
[ 2837.759383] syscall_return_slowpath+0x196/0x1b9
[ 2837.759383] entry_SYSCALL_64_fastpath+0xab/0xad
[ 2837.759383] RIP: 0033:0x7f3ef3e6b9a7
[ 2837.759383] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 2837.759383] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7
[ 2837.759383] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910
[ 2837.759383] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015
[ 2837.759383] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64
[ 2837.759383] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0
[ 2837.777063] ---[ end trace e79345fe24b30b8f ]---
[ 2837.778235] ------------[ cut here ]------------
[ 2837.778856] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:9825 btrfs_free_block_groups+0x348/0x3eb [btrfs]
[ 2837.791385] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy
[ 2837.797711] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1
[ 2837.798594] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 2837.800118] Call Trace:
[ 2837.800515] dump_stack+0x68/0x92
[ 2837.801015] __warn+0xc2/0xdd
[ 2837.801471] warn_slowpath_null+0x1d/0x1f
[ 2837.801698] btrfs_free_block_groups+0x348/0x3eb [btrfs]
[ 2837.801698] close_ctree+0x1dd/0x2e1 [btrfs]
[ 2837.801698] ? evict_inodes+0x132/0x141
[ 2837.801698] btrfs_put_super+0x15/0x17 [btrfs]
[ 2837.801698] generic_shutdown_super+0x6a/0xeb
[ 2837.801698] kill_anon_super+0x12/0x1c
[ 2837.801698] btrfs_kill_super+0x16/0x21 [btrfs]
[ 2837.801698] deactivate_locked_super+0x30/0x68
[ 2837.801698] deactivate_super+0x36/0x39
[ 2837.801698] cleanup_mnt+0x58/0x76
[ 2837.801698] __cleanup_mnt+0x12/0x14
[ 2837.801698] task_work_run+0x77/0x9b
[ 2837.801698] prepare_exit_to_usermode+0x9d/0xc5
[ 2837.801698] syscall_return_slowpath+0x196/0x1b9
[ 2837.801698] entry_SYSCALL_64_fastpath+0xab/0xad
[ 2837.801698] RIP: 0033:0x7f3ef3e6b9a7
[ 2837.801698] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 2837.801698] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7
[ 2837.801698] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910
[ 2837.801698] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015
[ 2837.801698] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64
[ 2837.801698] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0
[ 2837.818441] ---[ end trace e79345fe24b30b90 ]---
[ 2837.818991] BTRFS info (device sdc): space_info 1 has 7974912 free, is not full
[ 2837.819830] BTRFS info (device sdc): space_info total=8388608, used=417792, pinned=0, reserved=0, may_use=18446744073709547520, readonly=0
What happens in the above example is the following:
1) When punching the hole, at btrfs_punch_hole(), the variable tail_len
is set to 2048 (as tail_start is 148Kb + 1 and offset + len is 150Kb).
This results in the creation of an extent map with a length of 2Kb
starting at file offset 148Kb, through find_first_non_hole() ->
btrfs_get_extent().
2) The second write (first write after the hole punch operation), sets
the range [50Kb, 152Kb[ to delalloc.
3) The third write, at btrfs_find_new_delalloc_bytes(), sees the extent
map covering the range [148Kb, 150Kb[ and ends up calling
set_extent_bit() for the same range, which results in splitting an
existing extent state record, covering the range [148Kb, 152Kb[ into
two 2Kb extent state records, covering the ranges [148Kb, 150Kb[ and
[150Kb, 152Kb[.
4) Finally at lock_and_cleanup_extent_if_need(), immediately after calling
btrfs_find_new_delalloc_bytes() we clear the delalloc bit from the
range [100Kb, 152Kb[ which results in the btrfs_clear_bit_hook()
callback being invoked against the two 2Kb extent state records that
cover the ranges [148Kb, 150Kb[ and [150Kb, 152Kb[. When called against
the first 2Kb extent state, it calls btrfs_delalloc_release_metadata()
with a length argument of 2048 bytes. That function rounds up the length
to a sector size aligned length, so it ends up considering a length of
4096 bytes, and then calls calc_csum_metadata_size() which results in
decrementing the inode's csum_bytes counter by 4096 bytes, so after
it stays a value of 0 bytes. Then the same happens when
btrfs_clear_bit_hook() is called against the second extent state that
has a length of 2Kb, covering the range [150Kb, 152Kb[, the length is
rounded up to 4096 and calc_csum_metadata_size() ends up being called
to decrement 4096 bytes from the inode's csum_bytes counter, which
at that time has a value of 0, leading to an underflow, which is
exactly what triggers the first warning, at btrfs_destroy_inode().
All the other warnings relate to several space accounting counters
that underflow as well due to similar reasons.
A similar case but where the hole punching operation creates an extent map
with a start offset not aligned to the sector size is the following:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "fpunch 695K 820K" $SCRATCH_MNT/bar
$ xfs_io -c "pwrite -S 0xaa 1008K 307K" $SCRATCH_MNT/bar
$ xfs_io -c "pwrite -S 0xbb -b 630K 1073K 630K" $SCRATCH_MNT/bar
$ xfs_io -c "pwrite -S 0xcc -b 459K 1068K 459K" $SCRATCH_MNT/bar
$ umount /mnt
During the unmount operation we get similar traces for the same reasons as
in the first example.
So fix the hole punching operation to make sure it never creates extent
maps with a length that is not aligned to the sector size nor with a start
offset that is not aligned to the sector size, as this breaks all
assumptions and it's a land mine.
Fixes: d77815461f ("btrfs: Avoid trucating page or punching hole in a already existed hole.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On an uncontended system, we can end up hitting soft lockups while
doing replace_path. At the core, and frequently called is
btrfs_qgroup_trace_leaf_items, so it makes sense to add a cond_resched
there.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is supposed to return blk_status_t error codes now but
there was a stray -ENOMEM left behind.
Fixes: 4e4cbee93d ("block: switch bios to blk_status_t")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, percpu_counter_add is a wrapper around __percpu_counter_add
which is preempt safe due to explicit calls to preempt_disable. Given
how __ prefix is used in percpu related interfaces, the naming
unfortunately creates the false sense that __percpu_counter_add is
less safe than percpu_counter_add. In terms of context-safety,
they're equivalent. The only difference is that the __ version takes
a batch parameter.
Make this a bit more explicit by just renaming __percpu_counter_add to
percpu_counter_add_batch.
This patch doesn't cause any functional changes.
tj: Minor updates to patch description for clarity. Cosmetic
indentation updates.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: linux-mm@kvack.org
Cc: "David S. Miller" <davem@davemloft.net>
Return EAGAIN if any of the following checks fail
+ i_rwsem is not lockable
+ NODATACOW or PREALLOC is not set
+ Cannot nocow at the desired location
+ Writing beyond end of file which is not allocated
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We got an internal report about a file system not wanting to mount
following 99e3ecfcb9 ("Btrfs: add more validation checks for
superblock").
BTRFS error (device sdb1): super_total_bytes 1000203816960 mismatch with
fs_devices total_rw_bytes 1000203820544
Subtracting the numbers we get a difference of less than a 4kb. Upon
closer inspection it became apparent that mkfs actually rounds down the
size of the device to a multiple of sector size. However, the same
cannot be said for various functions which modify the total size and are
called from btrfs_balance as well as when adding a new device. So this
patch ensures that values being saved into on-disk data structures are
always rounded down to a multiple of sectorsize.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The device->total_bytes member needs to always be rounded down to sectorsize
so that it corresponds to the value of super->total_bytes. However, there are
multiple places where the setter is fed a value which is not rounded which
can cause a fs to be unmountable due to the check introduced in
99e3ecfcb9 ("Btrfs: add more validation checks for superblock"). This patch
implements the getter/setter manually so that in a later patch I can add
necessary code to catch offenders.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mount option alloc_start was used in the past for debugging and
stressing the chunk allocator. Not meant to be used by users, so we're
not breaking anybody's setup.
There was some added complexity handling changes of the value and when
it was not same as default. Such code has likely been untested and I
think it's better to remove it.
This patch kills all use of alloc_start, and by doing that also fixes
a bug when alloc_size is set, potentially called from statfs:
in btrfs_calc_avail_data_space, traversing the list in RCU, the RCU
protection is temporarily dropped so btrfs_account_dev_extents_size can
be called and then RCU is locked again! Doing that inside
list_for_each_entry_rcu is just asking for trouble, but unlikely to be
observed in practice.
Signed-off-by: David Sterba <dsterba@suse.com>
We can keep the state among the other fs_info flags, there's no reason
why fs_frozen would need to be separate.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The pattern when err is used for function exit and ret is used for
return values of callees is not used here.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is called from ioctl context and we don't hold any locks
that take part in writeback. Right now it's only fs_info::volume_mutex.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't hold any locks here. Inidirectly called from statfs.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Submit and wait parts of write_dev_flush() can be split into two
separate functions for better readability.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no extra benefit to count null bdev during the submit loop,
as these null devices will be anyway checked during command
completion device loop just after the submit loop. We are holding the
device_list_mutex, the device->bdev status won't change in between.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit "btrfs: btrfs_io_bio_alloc never fails, skip error handling"
write_dev_flush will not return ENOMEM in the sending part. We do not
need to check for it in the callers.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
We already skip storing data where compression does not make the result
at least one byte less. Let's make the logic better and check
that compression frees at least one sector size of bytes, otherwise it's
not that useful.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ changelog updated ]
Signed-off-by: David Sterba <dsterba@suse.com>
We can hardcode GFP_NOFS to btrfs_io_bio_alloc, although it means we
change it back from GFP_KERNEL in scrub. I'd rather save a few stack
bytes from not passing the gfp flags in the remaining, more imporatant,
contexts and the bio allocating API now looks more consistent.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use btrfs_bioset for bios and ask to allocate the entire size of
btrfs_io_bio from btrfs bio_alloc_bioset. The member 'bio' is
initialized but the bytes from 0 to offset of 'bio' are left
uninitialized. Although we initialize some of the members in our
helpers, we should initialize the whole structures.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently dio read also goes to verify checksum if -EIO has been returned,
although it usually fails on checksum, it's not necessary at all, we could
directly check if there is another copy to read.
And with this, the behavior of dio read is now consistent with that of
buffered read.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use bool for uptodate ]
Signed-off-by: David Sterba <dsterba@suse.com>
With raid1 profile, dio read isn't tolerating IO errors if read length is
less than the stripe length (64K).
Our bio didn't get split in btrfs_submit_direct_hook() if (dip->flags &
BTRFS_DIO_ORIG_BIO_SUBMITTED) is true and that happens when the read
length is less than 64k. In this case, if the underlying device returns
error somehow, bio->bi_error has recorded that error.
If we could recover the correct data from another copy in profile raid1/10/5/6,
with btrfs_subio_endio_read() returning 0, bio would have the correct data in
its vector, but bio->bi_error is not updated accordingly so that the following
dio_end_io(dio_bio, bio->bi_error) makes directIO think this read has failed.
This fixes the problem by setting bio's error to 0 if a good copy has been
found.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Most callers of btrfs_bio_alloc convert from bytes to sectors. Hide that
in the helper and simplify the logic in the callsers.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
compressed_bio_alloc is now a trivial wrapper around btrfs_bio_alloc, no
point keeping it. The error handling can be simplified, as we know
btrfs_bio_alloc will never fail.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass gfp_flags=GFP_NOFS and nr_vecs=BIO_MAX_PAGES.
submit_extent_page adds __GFP_HIGH that does not make a difference in
our case as it allows access to memory reserves but otherwise does not
change the constraints.
Signed-off-by: David Sterba <dsterba@suse.com>
Update direct callers of btrfs_io_bio_alloc that do error handling, that
we can now remove.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update direct callers of btrfs_bio_clone that do error handling, that we
can now remove.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update direct callers of btrfs_bio_alloc that do error handling, that we
can now remove.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph pointed out that bio allocations backed by a bioset will never
fail. As we always use a bioset for all bio allocations, we can skip
the error handling. This patch adjusts our low-level helpers, the
cascaded changes to all callers will come next.
CC: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compression workspace buffers are larger than a page so we use
vmalloc, unconditionally. This is not always necessary as there might be
contiguous memory available.
Let's use the kvmalloc helpers that will try kmalloc first and fallback
to vmalloc. For that they require GFP_KERNEL flags. As we now have the
alloc_workspace calls protected by memalloc_nofs in the critical
contexts, we can safely use GFP_KERNEL.
Signed-off-by: David Sterba <dsterba@suse.com>
As alloc_workspace is now protected by memalloc_nofs where needed,
we can switch the kmalloc to use GFP_KERNEL.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The workspaces are preallocated at the beginning where we can safely use
GFP_KERNEL, but in some cases the find_workspace might reach the
allocation again, now in a more restricted context when the bios or
pages are being compressed.
To avoid potential lockup when alloc_workspace -> vmalloc would silently
use the GFP_KERNEL, add the memalloc_nofs helpers around the critical
call site.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As we don't use vmalloc/vzalloc/vfree directly in ctree.c, we can now
use the proper header that defines kvmalloc.
Signed-off-by: David Sterba <dsterba@suse.com>
Now that init_ipath is called either from a safe context or with
memalloc_nofs protection, we can switch to GFP_KERNEL allocations in
init_path and init_data_container.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
init_ipath is called from a safe ioctl context and from scrub when
printing an error. The protection is added for three reasons:
* init_data_container calls vmalloc and this does not work as expected
in the GFP_NOFS context, so this silently does GFP_KERNEL and might
deadlock in some cases
* keep the context constraint of GFP_NOFS, used by scrub
* we want to use GFP_KERNEL unconditionally inside init_ipath or its
callees
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
