There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex
is left locked forever. That may lead to deadlock
when rt5645_jack_detect_work() is called for the second time.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cdba4301ad ("ASoC: rt5650: add mutex to avoid the jack detection failure")
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver never uses the IRQ1_CFG register so there's no need to provide
a default value. It's set as a readable register only for debugging
through the regmap registers file.
A system-specific firmware could overwrite this register with a non-default
value. Therefore the driver can't hardcode what the initial value actually
is. As the register is only for debugging the value can be left unknown
until someone wants to read it through debugfs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240209145700.1555950-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the change in the widget free logic to power down the cores only
when the scheduler widgets are freed, we need to ensure that the
scheduler widget is freed only after all the widgets associated with the
scheduler are freed. This is to ensure that the secondary core that the
scheduler is scheduled to run on is kept powered on until all widgets
that need them are in use. While this works well for dynamic pipelines,
in the case of static pipelines the current logic does not take this into
account and frees all widgets in the order they occur in the
widget_list. So, modify this to ensure that the scheduler widgets are freed
only after all other types of widgets in the widget_list are freed.
Link: https://github.com/thesofproject/linux/issues/4807
Fixes: 31ed8da1c8 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240208133432.1688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite the handling of ASP1 TX mixer mux initialization to prevent a
deadlock during component_remove().
The firmware can overwrite the ASP1 TX mixer registers with
system-specific settings. This is mainly for hardware that uses the
ASP as a chip-to-chip link controlled by the firmware. Because of this
the driver cannot know the starting state of the ASP1 mixer muxes until
the firmware has been downloaded and rebooted.
The original workaround for this was to queue a work function from the
dsp_work() job. This work then read the register values (populating the
regmap cache the first time around) and then called
snd_soc_dapm_mux_update_power(). The problem with this is that it was
ultimately triggered by cs35l56_component_probe() queueing dsp_work,
which meant that it would be running in parallel with the rest of the
ASoC component and card initialization. To prevent accessing DAPM before
it was fully initialized the work function took the card mutex. But this
would deadlock if cs35l56_component_remove() was called before the work job
had completed, because ASoC calls component_remove() with the card mutex
held.
This new version removes the work function. Instead the regmap cache and
DAPM mux widgets are initialized the first time any of the associated ALSA
controls is read or written.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a1 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://lore.kernel.org/r/20240208123742.1278104-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case TDM is set in topology on SSP0, parser will overwrite vindex
value, because it only checks if port is set. Fix this by checking whole
field value.
Fixes: e6d50e474e ("ASoC: Intel: avs: Improve topology parsing of dynamic strings")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240207112624.2132821-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IRQ should be disabled whilst entering and exiting system suspend to
avoid the IRQ handler being called whilst the PM runtime is disabled.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240206113850.719888-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent changes modified operation-order in the probe() function without
updating its error path accordingly. If snd_hdac_i915_init() exists with
status EPROBE_DEFER the error path must cleanup allocated IRQs before
leaving the scope.
Fixes: 2dddc514b6 ("ASoC: Intel: avs: Move snd_hdac_i915_init to before probe_work.")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240202114901.1002127-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The servers for the @codeaurora domain have long been retired and any
messages sent there bounce. Srinivasa Rao Mandadapu has left the
company and there does not appear to be an updated address to suggest,
so drop Srinivasa as maintainer of the binding. The binding still
appears to be maintined as Judy is listed.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240202174313.4113670-1-quic_jhugo@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It looks like the "!" character was added accidentally. The
regmap_update_bits_check() function is normally going to succeed. This
means the rest of the function is unreachable and we don't handle the
situation where "changed" is true correctly.
Fixes: 07f7d6e7a1 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/0c254c07-d1c0-4a5c-a22b-7e135cab032c@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These patches fixe various things that were undocumented, unknown or
uncertain when the original driver code was written. And also a few
things that were just bugs.
Remove an unused stub function that calls a non-existant function.
This function was accidentally added as part of commit
2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test"). It was
a relic of an earlier version of the test that should have been
removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://msgid.link/r/20240129162737.497-19-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check whether the firmware is already patched. If so, include the
firmware version in the firmware file name.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if either:
- FIRMWARE_MISSING == 0, or
- it is a secured CS35L56 (which implies that is was already patched),
cs35l56_hw_init() will set preloaded_fw_ver to the (non-zero)
firmware version if either of these conditions is true.
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Backport note:
This won't apply to kernel versions older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-18-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the filename field layout to:
cs35l56-rev[-s]-dsp1-misc[-sub].[wmfw|bin]
This is to keep the same firmware file naming scheme as the
CS35L56 ASoC driver.
This is not a compatibility break because no firmware files have
been published.
The original field layout matched the ASoC driver, but the way the
ASoC driver used the wm_adsp driver config to form this filename
was bugged. Fixing the ASoC driver to use the correct wm_adsp config
strings means that the 's' flag (to indicate a secured part) has to
move to somewhere after the first '-'.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-17-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-16-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original 50ms timeout for firmware boot is not long enough for
worst-case time to reboot after a firmware download. Increase the
timeout to 250ms.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-15-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794e ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the silicon revision and secured flag in the wm_adsp fwf_name
string instead of including them in the part string.
This changes the format of the firmware name string from
cs35l56[s]-rev-misc[-system_name]
to
cs35l56-rev[-s]-misc[-system_name]
No firmware files have been published, so this doesn't cause a
compatibility break.
Silicon revision and secured flag are included in the firmware
filename to pick a firmware compatible with the part. These strings
were being added to the part string, but that is a misuse of the
string. The correct place for these is the fwf_name string, which
is specifically intended to select between multiple firmware files
for the same part.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Defer initializing the state of the ASP1 mixer registers until
the firmware has been downloaded and rebooted.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However, if it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link. Even if the ASP is used
as a firmware-firmware interconnect it is useful to have
ALSA controls for the ASP mixer. They are at least useful for
debugging.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP mixer registers. This means that we can't assume the default
state of these registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
DAPM normally reads the initial state of mux registers during
probe() but this would mean blocking probe() for several seconds
until the firmware has initialized them. To avoid this, the
mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read
the register state. Custom get/set callbacks are implemented for
ALSA control access, and these can safely block waiting for the
firmware download.
After the firmware download has completed, the state of the
mux registers is known so a work job is queued to call
snd_soc_dapm_mux_update_power() on each of the mux widgets.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ASP1_FRAME_CONTROL1, ASP1_FRAME_CONTROL5 and the ASP1_TX?_INPUT
registers to the sequence used to initialize the ASP configuration.
Write this sequence to the cache and directly to the registers to
ensure that they match.
A system-specific firmware can patch these registers to values that are
not the silicon default, so that the CS35L56 boots already in the
configuration used by Windows or by "driverless" Windows setups such
as factory tuning.
These may not match how Linux is configuring the HDA codec. And anyway
on Linux the ALSA controls are used to configure routing options.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Patch the SDW TX mixer registers to silicon defaults.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So the
firmware sets up the SDW TX mixer registers to whatever audio
is relevant on a specific system.
This means that the driver cannot assume the initial values
of these registers. But Linux has ALSA controls to configure
routing, so the registers can be patched to silicon default and
the ALSA controls used to select what audio to feed back to the
host capture path.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the check of fw_patched from cs35l56_is_fw_reload_needed().
Also remove the redundant check for control of the reset GPIO.
The fw_patched flag is set when cs35l56_dsp_work() has completed its
steps to download firmware and power-up wm_adsp. There was a check in
cs35l56_is_fw_reload_needed() to make a quick exit of 'false' if
!fw_patched. The original idea was that the system might be suspended
before the driver has ever made any attempt to download firmware, and
in that case the driver doesn't need to return to a patched state
because it was never in a patched state.
This check of fw_patched is buggy because it prevented ever recovering
from a failed patch. If a previous attempt to patch and reboot the
silicon had failed it would leave fw_patched==false. This would mean
the driver never attempted another download even though the fault may
have been cleared (by a hard reset, for example).
It is also a redundant check because the calling code already makes
a quick exit if cs35l56_component_probe() has not been called, which
deals with the original intent of this check but in a safer way.
The check for reset GPIO is redundant: if the silicon was hard-reset
the FIRMWARE_MISSING flag will be 1. But this check created an
expectation that the suspend/resume code toggles reset. This can't
easily be protected against accidental code breakage. The only reason
for the check was to skip runtime-resuming the driver to read the
PROTECTION_STATUS register when it already knows it reset the silicon.
But in that case the driver will have to be runtime-resumed to do
the firmware download. So it created an assumption for no benefit.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240129162737.497-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that it only adds the register patch on first-time initialization.
The call was after the post_soft_reset label, so every time this
function was run to re-initialize the hardware after a reset it would
call regmap_register_patch() and add the same reg_sequence again.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 898673b905 ("ASoC: cs35l56: Move shared data into a common data structure")
Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs35l56_component_remove() must call wm_adsp_power_down() and
wm_adsp2_component_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l56->component pointer is used by the suspend-resume handling to
know whether the driver is fully instantiated. This is to prevent it
queuing dsp_work which would result in calling wm_adsp when the driver
is not an instantiated ASoC component. So this pointer must be cleared
by cs35l56_component_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no need to overwrite fwf_name with a kstrdup() of the cs_dsp part
name. It is trivial to select either fwf_name or cs_dsp.part as the string
to use when building the filename in wm_adsp_request_firmware_file().
This leaves fwf_name entirely owned by the codec driver.
It also avoids problems with freeing the pointer. With the original code
fwf_name was either a pointer owned by the codec driver, or a kstrdup()
created by wm_adsp. This meant wm_adsp must free it if it set it, but not
if the codec driver set it. The code was handling this by using
devm_kstrdup().
But there is no absolute requirement that wm_adsp_common_init() must be
called from probe(), so this was a pseudo-memory leak - each new call to
wm_adsp_common_init() would allocate another block of memory but these
would only be freed if the owning codec driver was removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240129162737.497-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 0e7d82cbea ("ASoC: wm_adsp: Add support for loading bin files without wmfw")
Link: https://msgid.link/r/20240129162737.497-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previous commit that added support for Huawei MateBook D16 2021
with Ryzen 4600H (HVY-WXX9 M1010) was incomplete.
To activate support for this laptop, the DMI table in
acp3x-es83xx machine driver must also be updated.
Fixes: b5338b1b90 ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop")
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://msgid.link/r/20240128172229.657142-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Chen-Yu Tsai <wens@kernel.org>:
This series adds SPDIF controllers for the H616 and H618.
There's also a fix for SPDIF on H6: the controller also has a
receiver that was not correctly modeled.
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Add a new compatible string for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-3-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the H6 was added to the bindings, only the TX DMA channel was
added. As the hardware supports both transmit and receive functions,
the binding is missing the RX DMA channel and is thus incorrect.
Also, the reset control was not made mandatory.
Add the RX DMA channel for SPDIF on H6 by removing the compatible from
the list of compatibles that should only have a TX DMA channel. And add
the H6 compatible to the list of compatibles that require the reset
control to be present.
Fixes: b204530314 ("dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZbahQwAKCRDfioYZHlFs
Z1VNAP0dz0rhIriILaAvRidYQWt/qtmhoaZswrVvEtY+q/orogD/d6eHChpRQKM2
Bg8ofjqLkaEEszx7VBVhOGodgaQnBA8=
=RUzU
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
exposure
-----BEGIN PGP SIGNATURE-----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=ibuM
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Prevent an inconsistent futex operation leading to stale state
exposure
* tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent the reuse of stale pi_state
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmW2KrEACgkQEsHwGGHe
VUr1WA//Qsi2JkxO1lyUQgnyuXqs0+oVZJxFyH2dFYzWkfSaxgsyPZ0H+wsweDfP
OgoNzwwDf1IaNbVz2voV6lSM/30ujJMx4aAucT5WTEXa12cJsvipxRiNd8WU8GqQ
buBz+vnS9IJ2WfM7UxhIVevYFU8H/ERcSO9WCII0YjlcVxmlwMK3B7kFdpBPdT5Q
m5hvBorZzIa9wD3TI7e+VvEVbCx0WjsYYEpXDXM/yCf1Juc9952pjjunzx3YmJES
5JG2WpnEvmNdWwIPO0NAjs7Shw/MNViXTy5Ls5jcbswiAcBoUxNHQlUsvNVDaVyv
8eMCkPzuSipY8HSoetQSTJl+mr3LyYRvevKahuTgwbS8K+kxgClqHFoLZVqolWnk
2IDo63R6Ex6lb1Xpb/Rpg/4j4NqUVWcvPHf6Z2CmMRq/XbSk2DIFl1Wxjgy/Cjnu
+nNLw2FYayEBrKF3VlYgERGoCfBrEsksxzljjeHFn5XWr+G2x1ykF37xaWjQ2+oV
sFl6UYwIsdqPCjHmpT6R1lwCdeEC3o3Zc2Kf5uEVj+pXacKJkxZU0L6ZneO8UiEc
rtc0gTgm9ZNd8oDsjsaBU1A3KxH9lOfVz82ZV0tipz94dcN4zrB9Qag0Yw+64YOC
cQ9cRKiFiCVCeD1ksDLZe1IUX++T2Y9O8MZv06ZDrbaFC56+lU8=
=IgON
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Initialize the resend node of each IRQ descriptor, not only the first
one
* tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Initialize resend_node hlist for all interrupt descriptors
events in order to be able to compute correct averages
- Limit the duration of the clocksource watchdog checking interval as
too long intervals lead to wrongly marking the TSC as unstable
-----BEGIN PGP SIGNATURE-----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=9RXx
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Preserve the number of idle calls and sleep entries across CPU
hotplug events in order to be able to compute correct averages
- Limit the duration of the clocksource watchdog checking interval as
too long intervals lead to wrongly marking the TSC as unstable
* tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Preserve number of idle sleeps across CPU hotplug events
clocksource: Skip watchdog check for large watchdog intervals
- Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
Forest CPU model number
- Make a stub function export non-GPL because it is part of the
paravirt alternatives and that can be used by non-GPL code
-----BEGIN PGP SIGNATURE-----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=7vE4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure 32-bit syscall registers are properly sign-extended
- Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
Forest CPU model number
- Make a stub function export non-GPL because it is part of the
paravirt alternatives and that can be used by non-GPL code
* tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5
x86/entry/ia32: Ensure s32 is sign extended to s64
x86/cpu: Add model number for Intel Clearwater Forest processor
x86/CPU/AMD: Add X86_FEATURE_ZEN5
x86/paravirt: Make BUG_func() usable by non-GPL modules
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization of
reserved pages may cause access of NODE_DATA() with invalid nid and crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages() to
ensure a valid node id is always passed to init_reserved_page().
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmW19ekQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kQ2CCAC+aXkQdFbP08jyZ1Q3rjZpXMAq6xORVT1z
fWFQQlAQ2L75dWR2dUh+lFPAQRLhs1KfUUmwZUczKhyWXpCFsLLT5OgLtfDLk/sB
XzoyZeW7//pSY22mFxcVmOMuJBZ3q+ZB0n9LdhIaWcdedltvEFhVXZjVPFJszszb
8BZIq7tKvUFUv8KOlfGTvjvNjhjmXRRmcrG1fsS4sdkHQ8/36/KjqI0sZUgMq7Fz
HfawJ6bK+ysHBmKCuWRAU4ssiuUGSaivqh8Azt+FI/zr2Dk+40asFpE0573VMNB7
MaXAn9TjXKU6e/wMBB7KQSUqIlv3Pm7iK2+B/IP4AJ1cWLylRO1r
=efaB
-----END PGP SIGNATURE-----
Merge tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix crash when reserved memory is not added to memory.
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization
of reserved pages may cause access of NODE_DATA() with invalid nid and
crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages()
to ensure a valid node id is always passed to init_reserved_page()"
* tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix crash when reserved memory is not added to memory
Highlights:
- WMI bus driver fixes
- Second attempt (previously reverted) at P2SB PCI rescan deadlock fix
- AMD PMF driver improvements
- MAINTAINERS updates
- Misc. other small fixes and hw-id additions
The following is an automated git shortlog grouped by driver:
MAINTAINERS:
- remove defunct acpi4asus project info from asus notebooks section
- add Luke Jones as maintainer for asus notebooks
- Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer
intel-uncore-freq:
- Fix types in sysfs callbacks
intel-wmi-sbl-fw-update:
- Fix function name in error message
p2sb:
- Use pci_resource_n() in p2sb_read_bar0()
- Allow p2sb_bar() calls during PCI device probe
platform/mellanox:
- mlxbf-pmc: Fix offset calculation for crspace events
- mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
platform/x86/amd/pmf:
- Fix memory leak in amd_pmf_get_pb_data()
- Get ambient light information from AMD SFH driver
- Get Human presence information from AMD SFH driver
platform/x86/intel/ifs:
- Call release_firmware() when handling errors.
silicom-platform:
- Add missing "Description:" for power_cycle sysfs attr
touchscreen_dmi:
- Add info for the TECLAST X16 Plus tablet
wmi:
- Fix wmi_dev_probe()
- Fix notify callback locking
- Decouple legacy WMI notify handlers from wmi_block_list
- Return immediately if an suitable WMI event is found
- Fix error handling in legacy WMI notify handler functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmW1JScUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xNVwf/YXSuNEw+ztLH0pEySBUATHrcIbO7
gOpW2ZISf6IzRe7HFw7Ea1IJxrvysPn8VEribT3Sot9Ka+Pzd6H/TVA64sfyE7oG
wEke2Uxpnfie65Yo2IYNADhfLTOyAL7mvchScQz5hTE+gBq5Fdac2ykK+ox1dpTs
BqPg1/yG06L1SRX2Id0UNNYGMBsmjUH6v2b+M8Rcba+qcdznGMRe7l8T1Q2fY+nl
P6+tz3rYdfrGn1j+35Wo2bgKaB8l6rrtOscIvpke+CxZ95+6UxqZfLOBCg8u/njA
QbWqfZGjmbRGrbNo4C3fAHjj6SzQNyNfsm4gd4eJzl8X1CR9gzM8kb/xmg==
=yoe7
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- WMI bus driver fixes
- Second attempt (previously reverted) at P2SB PCI rescan deadlock fix
- AMD PMF driver improvements
- MAINTAINERS updates
- Misc other small fixes and hw-id additions
* tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
platform/x86/intel/ifs: Call release_firmware() when handling errors.
platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data()
platform/x86/amd/pmf: Get ambient light information from AMD SFH driver
platform/x86/amd/pmf: Get Human presence information from AMD SFH driver
platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events
platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
MAINTAINERS: remove defunct acpi4asus project info from asus notebooks section
MAINTAINERS: add Luke Jones as maintainer for asus notebooks
MAINTAINERS: Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer
platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr
platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message
platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0()
platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
platform/x86: intel-uncore-freq: Fix types in sysfs callbacks
platform/x86: wmi: Fix wmi_dev_probe()
platform/x86: wmi: Fix notify callback locking
platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list
platform/x86: wmi: Return immediately if an suitable WMI event is found
platform/x86: wmi: Fix error handling in legacy WMI notify handler functions
-----BEGIN PGP SIGNATURE-----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=3XNw
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix boot failure on machines with more than 8 nodes, and fix two build
errors about KVM"
* tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Add returns to SIMD stubs
LoongArch: KVM: Fix build due to API changes
LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
* Fix read only mounts when using fsopen mount API
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZbCl9wAKCRAH7y4RirJu
9AbqAP43B2qBRn2o16MrK3qwGTNOvecck1Nze1klaQIKnwyTAQD7BbcpuNlLOKqZ
7HkZcaXnyIrzNm1DrnDFX1zIagDY+QA=
=S9zy
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
- Fix read only mounts when using fsopen mount API
* tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: read only mounts with fsopen mount API are busted
- fix for REQ_OP_FLUSH usage; this fixes filesystems going read only
with -EOPNOTSUPP from the block layer.
(this really should have gone in with the block layer patch causing
the -EOPNOTSUPP, or should have gone in before).
- fix an allocation in non-sleepable context
- fix one source of srcu lock latency, on devices with terrible discard
latency
- fix a reattach_inode() issue in fsck
-----BEGIN PGP SIGNATURE-----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=6Xv0
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- fix for REQ_OP_FLUSH usage; this fixes filesystems going read only
with -EOPNOTSUPP from the block layer.
(this really should have gone in with the block layer patch causing
the -EOPNOTSUPP, or should have gone in before).
- fix an allocation in non-sleepable context
- fix one source of srcu lock latency, on devices with terrible discard
latency
- fix a reattach_inode() issue in fsck
* tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs:
bcachefs: __lookup_dirent() works in snapshot, not subvol
bcachefs: discard path uses unlock_long()
bcachefs: fix incorrect usage of REQ_OP_FLUSH
bcachefs: Add gfp flags param to bch2_prt_task_backtrace()
-----BEGIN PGP SIGNATURE-----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=FipL
-----END PGP SIGNATURE-----
Merge tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix netlink OOB
- Minor kernel doc fix
* tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix global oob in ksmbd_nl_policy
smb: Fix some kernel-doc comments
