TI keystone display subsystem present in AM65, AM62 and AM62A SoC support
two separate register spaces namely "common" and "common1" which can be
used by two separate hosts to program the display controller as described
in respective Technical Reference Manuals [1].
The common1 register space has similar set of configuration registers as
supported in common register space except the global configuration
registers which are exclusive to common region.
This adds binding for "common1" register region too as supported by the
hardware.
[1]:
AM62x TRM:
https://www.ti.com/lit/pdf/spruiv7 (Section 14.8.9.1 DSS Registers)
AM65x TRM:
https://www.ti.com/lit/pdf/spruid7 (Section 12.6.5 DSS Registers)
AM62A TRM:
https://www.ti.com/lit/pdf/spruj16 (Section 14.9.9 Display Subsystem Registers)
Fixes: 2d8730f102 ("dt-bindings: display: ti,am65x-dss: Add dt-schema yaml binding")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216062426.4170528-2-devarsht@ti.com
The DSS controller on TI's AM62A7 SoC is an update from that on TI's
AM625 SoC. Like the DSS in AM625, the DSS in this SoC has 2 video
pipelines, but unlike the former, the latter only has one output port on
VP2 to service DPI display sinks.
Add the new controller's compatible.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20231108171619.978438-2-a-bhatia1@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The DSS controller on TI's AM625 SoC is an update from that on TI's
AM65X SoC. The former has an additional OLDI TX on its first video port
that helps output cloned video or WUXGA (1920x1200@60fps) resolution
video output over a dual-link mode to reduce the required OLDI clock
output.
The second video port is same from AM65x DSS and it outputs DPI video
data. It can support 2K resolutions @ 60fps, independently.
Add the new controller's compatible and update descriptions.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616150900.6617-2-a-bhatia1@ti.com
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm
Link: https://lore.kernel.org/r/20230320233823.2919475-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. Many schemas for
phandle-array properties aren't clear in the schema which case applies
though the description usually describes it.
The array of phandles case boils down to needing:
items:
maxItems: 1
The phandle plus args cases should typically take this form:
items:
- items:
- description: A phandle
- description: 1st arg cell
- description: 2nd arg cell
With this change, some examples need updating so that the bracketing of
property values matches the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220119015038.2433585-1-robh@kernel.org
Now that we have a graph schema, rework the display related schemas to use
it. Mostly this is adding a reference to graph.yaml and dropping duplicate
parts from schemas.
In panel-common.yaml, 'ports' is dropped. Any binding using 'ports'
should be one with more than 1 port node, and the binding must define
what each port is.
Note that ti,sn65dsi86.yaml, ti,tfp410,yaml and toshiba,tc358768.yaml will
need further updates to use video-interfaces.yaml once that lands.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104180724.2275098-1-robh@kernel.org
The examples template is a 'simple-bus' with a size of 1 cell for
had between 2 and 4 cells which really only errors on I2C or SPI type
devices with a single cell.
The easiest fix in most cases is to change the 'reg' property to for 1 cell
address and size. In some cases with child devices having 2 cells, that
doesn't make sense so a bus node is needed.
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock
Signed-off-by: Rob Herring <robh@kernel.org>
Extra dtc warnings (roughly what W=1 enables) are now enabled by default
when building the binding examples. These were fixed treewide in
5.6-rc5, but some new display bindings have been added with new
warnings:
Documentation/devicetree/bindings/display/ti/ti,am65x-dss.example.dts:21.27-49.11: Warning (unit_address_format): /example-0/dss@04a00000: unit name should not have leading 0s
Documentation/devicetree/bindings/display/ti/ti,j721e-dss.example.dts:21.27-72.11: Warning (unit_address_format): /example-0/dss@04a00000: unit name should not have leading 0s
Documentation/devicetree/bindings/display/ti/ti,k2g-dss.example.dts:20.27-42.11: Warning (unit_address_format): /example-0/dss@02540000: unit name should not have leading 0s
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313180727.23044-1-robh@kernel.org
Add dt-schema yaml bindig for AM65x DSS, AM65x version TI Keystone
Display SubSystem.
Version history:
v2: no change
v3: - Add ports node
- use allOf in ti,am65x-oldi-io-ctrl to add both $ref and maxItems
- Add includes to dts example
- reindent dts example
v4: - Add descriptions to reg and clocks properties
- Remove minItems when its value is the same as maxItems value
v5: - itemize reg and clocks properties' descriptions
v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
Benoit Parrot <bparrot@ti.com>
v7: no change
v8: no change
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1799656fb8cc42ca698fc29bbc80c1bae442d6d3.1580129724.git.jsarha@ti.com
Devarsh Thakkar