drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
(cherry picked from commit 51f7008239)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
Fixes: 74a75dc908 ("drm/i915/display: move plane prepare/cleanup to intel_atomic_plane.c")
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505082212.27089-1-stanislav.lisovskiy@intel.com
(cherry picked from commit 1d5b09f8da)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
A pair of pre-Xe registers were being included in the Xe capture list.
GuC was rejecting those as being invalid and logging errors about
them. So, stop doing it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Fixes: dce2bd5423 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-2-John.C.Harrison@Intel.com
(cherry picked from commit b049132d61)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
v1: Vmbo->shadow is used to back vram bo up when vram lost. So that we
should set shadow as vmbo->shadow to recover vmbo->bo
v2: Modify if(vmbo->shadow) shadow = vmbo->shadow as if(!vmbo->shadow)
continue;
Fixes: e18aaea733 ("drm/amdgpu: move shadow_list to amdgpu_bo_vm")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lin.Cao <lincao12@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.
[ 102.873958] Call Trace:
[ 102.873959] <TASK>
[ 102.873961] gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu]
[ 102.874019] gfx_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.874072] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.874122] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.874172] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.874223] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.874321] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.874375] process_one_work+0x21f/0x3f0
[ 102.874377] worker_thread+0x200/0x3e0
[ 102.874378] ? process_one_work+0x3f0/0x3f0
[ 102.874379] kthread+0xfd/0x130
[ 102.874380] ? kthread_complete_and_exit+0x20/0x20
[ 102.874381] ret_from_fork+0x22/0x30
v2:
- Handle umc and gfx ras cases in separated patch
- Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11
v3:
- Improve the subject and code comments
- Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init
v4:
- Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and
SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state
- Check cp_ecc_error_irq.funcs rather than ip version for a more
sustainable life
v5:
- Simplify judgment conditions
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Description]
- Due to bandwidth / arbitration issues at 200Mhz DCFCLK,
we want to enforce minimum 60us of prefetch to avoid
intermittent underflow issues
- Since 60us prefetch is already enforced for UCLK DPM0,
and many DCFCLK's > 200Mhz are mapped to UCLK DPM1, in
theory there should not be any UCLK DPM regressions by
enforcing greater prefetch
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This is originally a change (9c75891f) in DCN32 because of the lack
of interface to set TX while keeping symclk on. Adding this workaround
to DCN314 will resolve the current issue.
Fixes: 9c75891fee ("drm/amd/display: rework recent update PHY state commit")
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dpm_is_overdrive_supported is a common API across all
asics, so we should cast pp_handle into correct structure
under different power frameworks.
v2: using return directly to simplify code
v3: SI asic does not carry od_enabled member in pp_handle, and update Fixes tag
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2541
Fixes: eb4900aa4c ("drm/amdgpu: Fix kernel NULL pointer dereference in dpm functions")
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
APUs w/ gfx9 onwards doesn't reply on PCIe atomics, rather
it is internal path w/ native atomic support. Set have_atomics_support
to true.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the maximum resolution reported for HEVC encoding on VCN 3
devices to reflect its 8K encoding capability.
v2: Also update the max height for H.264 encoding to match spec.
(Ruijing)
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=HmfP
-----END PGP SIGNATURE-----
Merge tag 'nf-23-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter updates for net
The following patchset contains Netfilter fixes for net:
1) Fix UAF when releasing netnamespace, from Florian Westphal.
2) Fix possible BUG_ON when nf_conntrack is enabled with enable_hooks,
from Florian Westphal.
3) Fixes for nft_flowtable.sh selftest, from Boris Sukholitko.
4) Extend nft_flowtable.sh selftest to cover integration with
ingress/egress hooks, from Florian Westphal.
* tag 'nf-23-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: nft_flowtable.sh: check ingress/egress chain too
selftests: nft_flowtable.sh: monitor result file sizes
selftests: nft_flowtable.sh: wait for specific nc pids
selftests: nft_flowtable.sh: no need for ps -x option
selftests: nft_flowtable.sh: use /proc for pid checking
netfilter: conntrack: fix possible bug_on with enable_hooks=1
netfilter: nf_tables: always release netdev hooks from notifier
====================
Link: https://lore.kernel.org/r/20230510083313.152961-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
af_unix: Fix two data races reported by KCSAN.
KCSAN reported data races around these two fields for AF_UNIX sockets.
* sk->sk_receive_queue->qlen
* sk->sk_shutdown
Let's annotate them properly.
====================
Link: https://lore.kernel.org/r/20230510003456.42357-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's been a few years since we've sorted this thing, and the end result
is that we've added MAINTAINERS entries in the wrong order, and a number
of entries have their fields in non-canonical order too.
So roll this boulder up the hill one more time by re-running
./scripts/parse-maintainers.pl --order
on it.
This file ends up being fairly painful for merge conflicts even
normally, since unlike almost all other kernel files it's one of those
"everybody touches the same thing", and re-ordering all entries is only
going to make that worse. But the alternative is to never do it at all,
and just let it all rot..
The rc2 week is likely the quietest and least painful time to do this.
Requested-by: Randy Dunlap <rdunlap@infradead.org>
Requested-by: Joe Perches <joe@perches.com> # "Please use --order"
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should not be caching closed files when freeze is invoked on an fs
(so we can release resources more gracefully).
Fixes xfstests generic/068 generic/390 generic/491
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmRcFLAACgkQnJ2qBz9k
QNmSuQf+P+hFOHVpCb83S4TrNsfPC9M7Pv/M1Rw926p1gESNLez1ElAx2B35OIBZ
y4ijqrSHgXbCsC3PvbxR9YfBPJZwIhtmKwjPC+9KlhAFB536Bvt/nt34fjRCWJiS
nABnexegkirk7EQufAGVZQ1gtm1p0qSCA1B/l5AFl4KeLIin31U/08F2eE1OAo3K
TmxhXzlC+JRXjf/X/X8mzJ8nz/hY5039BDvs7EpVdOsZcLFRQcCUygUCrOdV94uI
1wyzMoGNaiIsZHpHPf3NtphUoE9IFpZQJGXMTR4ehBgFYkkOHYxsjW+wn8YOmaks
qzRRXb9w0WdgAXChDGu1xYXV6Wpjiw==
=kqSe
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull inotify fix from Jan Kara:
"A fix for possibly reporting invalid watch descriptor with inotify
event"
* tag 'fsnotify_for_v6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify: Avoid reporting event with invalid wd
On corrupt gfs2 file systems the evict code can try to reference the
journal descriptor structure, jdesc, after it has been freed and set to
NULL. The sequence of events is:
init_journal()
...
fail_jindex:
gfs2_jindex_free(sdp); <------frees journals, sets jdesc = NULL
if (gfs2_holder_initialized(&ji_gh))
gfs2_glock_dq_uninit(&ji_gh);
fail:
iput(sdp->sd_jindex); <--references jdesc in evict_linked_inode
evict()
gfs2_evict_inode()
evict_linked_inode()
ret = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
<------references the now freed/zeroed sd_jdesc pointer.
The call to gfs2_trans_begin is done because the truncate_inode_pages
call can cause gfs2 events that require a transaction, such as removing
journaled data (jdata) blocks from the journal.
This patch fixes the problem by adding a check for sdp->sd_jdesc to
function gfs2_evict_inode. In theory, this should only happen to corrupt
gfs2 file systems, when gfs2 detects the problem, reports it, then tries
to evict all the system inodes it has read in up to that point.
Reported-by: Yang Lan <lanyang0908@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Highlights:
- thinkpad_acpi: Fix profile (performance/bal/low-power) regression on T490
- misc. other small fixes / hw-id additions
The following is an automated git shortlog grouped by driver:
hp-wmi:
- add micmute to hp_wmi_keymap struct
intel_scu_pcidrv:
- Add back PCI ID for Medfield
platform/mellanox:
- fix potential race in mlxbf-tmfifo driver
platform/x86/intel-uncore-freq:
- Return error on write frequency
thinkpad_acpi:
- Add profile force ability
- Fix platform profiles on T490
touchscreen_dmi:
- Add info for the Dexp Ursus KX210i
- Add upside-down quirk for GDIX1002 ts on the Juno Tablet
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmRbcQ4UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yFnQf9G83wo2B5SfjN7V7viYHEGB4InfQL
+MbhwP+Efe++BkxwAzVMcVLSuYOsbqcrRBCiQkBVCyAF14LVVH3ymnn/upoqz9l4
K4JUZorGIEPgl0SpGP+41j+P93XYfcfMYPRetZA8ErBpitSfHVf9oAG8vTgaemda
Qxo8DWs4R1WGdg8KZ7icZ7shXiyzIeGBnQB/5EzpBrv6v6EmiJsUZh5ZZASOidrg
IXTp8LgLhkFbIQBgHoOyHoM7puRI7MRbxu5YEJ+wKumFi4KmuTET5iDlZFpmqvoH
eAU/JUWIsQ3I1QwTKFSLFYkJZCZrIIJHew1Lvs9F+/x1c2vs1QjOG8RoEg==
=SEuW
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Nothing special to report just various small fixes:
- thinkpad_acpi: Fix profile (performance/bal/low-power) regression
on T490
- misc other small fixes / hw-id additions"
* tag 'platform-drivers-x86-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: fix potential race in mlxbf-tmfifo driver
platform/x86: touchscreen_dmi: Add info for the Dexp Ursus KX210i
platform/x86: touchscreen_dmi: Add upside-down quirk for GDIX1002 ts on the Juno Tablet
platform/x86: thinkpad_acpi: Add profile force ability
platform/x86: thinkpad_acpi: Fix platform profiles on T490
platform/x86: hp-wmi: add micmute to hp_wmi_keymap struct
platform/x86/intel-uncore-freq: Return error on write frequency
platform/x86: intel_scu_pcidrv: Add back PCI ID for Medfield
During an IGT GPU reset test we see again oops despite of
commit 0c8c901aaaebc9 (drm/sched: Check scheduler ready before calling
timeout handling).
It uses ready condition whether to call drm_sched_fault which unwind
the TDR leads to GPU reset.
However it looks the ready condition is overloaded with other meanings,
for example, for the following stack is related GPU reset :
0 gfx_v9_0_cp_gfx_start
1 gfx_v9_0_cp_gfx_resume
2 gfx_v9_0_cp_resume
3 gfx_v9_0_hw_init
4 gfx_v9_0_resume
5 amdgpu_device_ip_resume_phase2
does the following:
/* start the ring */
gfx_v9_0_cp_gfx_start(adev);
ring->sched.ready = true;
The same approach is for other ASICs as well :
gfx_v8_0_cp_gfx_resume
gfx_v10_0_kiq_resume, etc...
As a result, our GPU reset test causes GPU fault which calls unconditionally gfx_v9_0_fault
and then drm_sched_fault. However now it depends on whether the interrupt service routine
drm_sched_fault is executed after gfx_v9_0_cp_gfx_start is completed which sets the ready
field of the scheduler to true even for uninitialized schedulers and causes oops vs
no fault or when ISR drm_sched_fault is completed prior gfx_v9_0_cp_gfx_start and
NULL pointer dereference does not occur.
Use the field timeout_wq to prevent oops for uninitialized schedulers.
The field could be initialized by the work queue of resetting the domain.
v1: Corrections to commit message (Luben)
Fixes: 11b3b9f461 ("drm/sched: Check scheduler ready before calling timeout handling")
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Link: https://lore.kernel.org/r/20230510135111.58631-1-vitaly.prosyak@amd.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Previously clear_cache mount option would simply disable free-space-tree
feature temporarily then re-enable it to rebuild the whole free space
tree.
But this is problematic for block-group-tree feature, as we have an
artificial dependency on free-space-tree feature.
If we go the existing method, after clearing the free-space-tree
feature, we would flip the filesystem to read-only mode, as we detect a
super block write with block-group-tree but no free-space-tree feature.
This patch would change the behavior by properly rebuilding the free
space tree without disabling this feature, thus allowing clear_cache
mount option to work with block group tree.
Now we can mount a filesystem with block-group-tree feature and
clear_mount option:
$ mkfs.btrfs -O block-group-tree /dev/test/scratch1 -f
$ sudo mount /dev/test/scratch1 /mnt/btrfs -o clear_cache
$ sudo dmesg -t | head -n 5
BTRFS info (device dm-1): force clearing of disk cache
BTRFS info (device dm-1): using free space tree
BTRFS info (device dm-1): auto enabling async discard
BTRFS info (device dm-1): rebuilding free space tree
BTRFS info (device dm-1): checking UUID tree
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_redirty_list_add zeroes the buffer data and sets the
EXTENT_BUFFER_NO_CHECK to make sure writeback is fine with a bogus
header. But it does that after already marking the buffer dirty, which
means that writeback could already be looking at the buffer.
Switch the order of operations around so that the buffer is only marked
dirty when we're ready to write it.
Fixes: d3575156f6 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When both of the superblock zones are full, we need to check which
superblock is newer. The calculation of last superblock position is wrong
as it does not consider zone_capacity and uses the length.
Fixes: 9658b72ef3 ("btrfs: zoned: locate superblock position using zone capacity")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For data block groups, we zone finish a zone (or, just deactivate it) when
seeing the last IO in btrfs_finish_ordered_io(). That is only called for
IOs using ZONE_APPEND, but we use a regular WRITE command for data
relocation IOs. Detect it and call btrfs_zone_finish_endio() properly.
Fixes: be1a1d7a5d ("btrfs: zoned: finish fully written block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit d4c3676507 ("net: mscc: ocelot: keep ocelot_stat_layout by reg
address, not offset") organized the stats counters for Ocelot chips, namely
the VSC7512 and VSC7514. A few of the counter offsets were incorrect, and
were caught by this warning:
WARNING: CPU: 0 PID: 24 at drivers/net/ethernet/mscc/ocelot_stats.c:909
ocelot_stats_init+0x1fc/0x2d8
reg 0x5000078 had address 0x220 but reg 0x5000079 has address 0x214,
bulking broken!
Fix these register offsets.
Fixes: d4c3676507 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c76c6c4ecb ("ARM: 9294/2: vfp: Fix broken softirq handling
with instrumentation enabled") updated the VFP exception entry logic to
go via a C function, so that we get the compiler's version of
local_bh_disable(), which may be instrumented, and isn't generally
callable from assembler.
However, this assumes that passing an alternative 'success' return
address works in C as it does in asm, and this is only the case if the C
calls in question are tail calls, as otherwise, the stack will need some
unwinding as well.
I have already sent patches to the list that replace most of the asm
logic with C code, and so it is preferable to have a minimal fix that
addresses the issue and can be backported along with the commit that it
fixes to v6.3 from v6.4. Hopefully, we can land the C conversion for v6.5.
So instead of passing the 'success' return address as a function
argument, pass the stack address from where to pop it so that both LR
and SP have the expected value.
Fixes: c76c6c4ecb ("ARM: 9294/2: vfp: Fix broken softirq handling with ...")
Reported-by: syzbot+d4b00edc2d0c910d4bf4@syzkaller.appspotmail.com
Tested-by: syzbot+d4b00edc2d0c910d4bf4@syzkaller.appspotmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Fix the chapter heading for "X.25 Device Driver Interface" so that it
does not contain a trailing '-' character, which makes Sphinx
omit this heading from the contents.
Reverse the order of the x25.rst and x25-iface.rst files in the index
so that the project introduction (x25.rst) comes first.
Fixes: 883780af72 ("docs: networking: convert x25-iface.txt to ReST")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: linux-x25@vger.kernel.org
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clearing the PBA bit from the driver is race prone and it may lead to
dropped interrupt events. This could potentially lead to the traffic
being completely halted.
Fixes: 5e8c5adf95 ("gve: DQO: Add core netdev features")
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In synopsys_xpcs_compat[], the DW_XPCS_2500BASEX entry was setting
the number of interfaces using the xpcs_2500basex_features array
rather than xpcs_2500basex_interfaces. This causes us to overflow
the array of interfaces. Fix this.
Fixes: f27abde304 ("net: pcs: add 2500BASEX support for Intel mGbE controller")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__condition is evaluated twice in sk_wait_event() macro.
First invocation is lockless, and reads can race with writes,
as spotted by syzbot.
BUG: KCSAN: data-race in sk_stream_wait_connect / tcp_disconnect
write to 0xffff88812d83d6a0 of 4 bytes by task 9065 on cpu 1:
tcp_disconnect+0x2cd/0xdb0
inet_shutdown+0x19e/0x1f0 net/ipv4/af_inet.c:911
__sys_shutdown_sock net/socket.c:2343 [inline]
__sys_shutdown net/socket.c:2355 [inline]
__do_sys_shutdown net/socket.c:2363 [inline]
__se_sys_shutdown+0xf8/0x140 net/socket.c:2361
__x64_sys_shutdown+0x31/0x40 net/socket.c:2361
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88812d83d6a0 of 4 bytes by task 9040 on cpu 0:
sk_stream_wait_connect+0x1de/0x3a0 net/core/stream.c:75
tcp_sendmsg_locked+0x2e4/0x2120 net/ipv4/tcp.c:1266
tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1484
inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:651
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
__sys_sendto+0x246/0x300 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0x78/0x90 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00000000 -> 0x00000068
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
do_recvmmsg() can write to sk->sk_err from multiple threads.
As said before, many other points reading or writing sk_err
need annotations.
Fixes: 34b88a68f2 ("net: Fix use after free in the recvmmsg exit path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu says:
====================
bonding: fix send_peer_notif overflow
Bonding send_peer_notif was defined as u8. But the value is
num_peer_notif multiplied by peer_notif_delay, which is u8 * u32.
This would cause the send_peer_notif overflow.
Before the fix:
TEST: num_grat_arp (active-backup miimon num_grat_arp 10) [ OK ]
TEST: num_grat_arp (active-backup miimon num_grat_arp 20) [ OK ]
4 garp packets sent on active slave eth1
TEST: num_grat_arp (active-backup miimon num_grat_arp 30) [FAIL]
24 garp packets sent on active slave eth1
TEST: num_grat_arp (active-backup miimon num_grat_arp 50) [FAIL]
After the fix:
TEST: num_grat_arp (active-backup miimon num_grat_arp 10) [ OK ]
TEST: num_grat_arp (active-backup miimon num_grat_arp 20) [ OK ]
TEST: num_grat_arp (active-backup miimon num_grat_arp 30) [ OK ]
TEST: num_grat_arp (active-backup miimon num_grat_arp 50) [ OK ]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When run the test in netns, it's not easy to get the tc stats via
tc_rule_handle_stats_get(). With the new netns parameter, we can get
stats from specific netns like
num=$(tc_rule_handle_stats_get "dev eth0 ingress" 101 ".packets" "-n ns")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bonding only supports setting peer_notif_delay with miimon set.
Fixes: 0307d589c4 ("bonding: add documentation for peer_notif_delay")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3c
("bonding: add an option to specify a delay between peer notifications").
the bond->send_peer_notif will be num_peer_notif multiplied by
peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif
overflow easily. e.g.
ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000
To fix the overflow, let's set the send_peer_notif to u32 and limit
peer_notif_delay to 300s.
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053
Fixes: 07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check for NULL pointer to avoid kernel crashing in case of missing WO
firmware in case only a single WEDv2 device has been initialized, e.g. on
MT7981 which can connect just one wireless frontend.
Fixes: 86ce0d09e4 ("net: ethernet: mtk_eth_soc: use WO firmware for MT7981")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure flowtable interacts correctly with ingress and egress
chains, i.e. those get handled before and after flow table respectively.
Adds three more tests:
1. repeat flowtable test, but with 'ip dscp set cs3' done in
inet forward chain.
Expect that some packets have been mangled (before flowtable offload
became effective) while some pass without mangling (after offload
succeeds).
2. repeat flowtable test, but with 'ip dscp set cs3' done in
veth0:ingress.
Expect that all packets pass with cs3 dscp field.
3. same as 2, but use veth1:egress. Expect the same outcome.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When running nft_flowtable.sh in VM on a busy server we've found that
the time of the netcat file transfers vary wildly.
Therefore replace hardcoded 3 second sleep with the loop checking for
a change in the file sizes. Once no change in detected we test the results.
Nice side effect is that we shave 1 second sleep in the fast case
(hard-coded 3 second sleep vs two 1 second sleeps).
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Doing wait with no parameters may interfere with some of the tests
having their own background processes.
Although no such test is currently present, the cleanup is useful
to rely on the nft_flowtable.sh for local development (e.g. running
background tcpdump command during the tests).
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some ps commands (e.g. busybox derived) have no -x option. For the
purposes of hash calculation of the list of processes this option is
inessential.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some ps commands (e.g. busybox derived) have no -p option. Use /proc for
pid existence check.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
