mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-30 08:02:30 +00:00
20069 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
65b55d4c85 |
ARM: SoC fixes for v5.10
This is a fairly large set of bug fixes on top of -rc1,
as most of them were ready but didn't quite make it into
the last-minute pull requests for the merge window.
Allwinner:
Fix for incorrect CPU overtemperature limit
Amlogic:
Multiple smaller DT bugfixes, and missing device nodes
Marvell EBU:
Add missing aliases for ethernet switch ports on
espressobin board
Marvell MMP:
One DTC warning fix
one bugfix for camera interface power-down
NXP i.MX:
Re-enable the GPIO driver on all defconfigs
ST STM32MP1:
Fix random crashes from incorrect voltage settings
Synaptics Berlin:
Enable the correct hardware timer driver
Texas Instruments K2G:
fix a boot regression in the power domain code
TEE drivers:
Fix regression in TEE "login" method
SCMI drivers:
multiple code fixes for corner cases in newly added code
MAINTAINERS file:
Move Kukjin Kim and Sangbeom Kim used to work on
Samsung Exynos.
Masahiro Yamada is stepping down as Uniphier maintainer
I did not include a series of patches that work around a
regression caused by a bugfix in an ethernet phy driver
that resulted in an inadvertent DT binding change. This is
still under discussion.
-----BEGIN PGP SIGNATURE-----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=cKNJ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bug fixes on top of -rc1, as most of
them were ready but didn't quite make it into the last-minute pull
requests for the merge window.
Allwinner:
- fix for incorrect CPU overtemperature limit
Amlogic:
- multiple smaller DT bugfixes, and missing device nodes
Marvell EBU:
- add missing aliases for ethernet switch ports on espressobin board
Marvell MMP:
- DTC warning fix
- bugfix for camera interface power-down
NXP i.MX:
- re-enable the GPIO driver on all defconfigs
ST STM32MP1:
- fix random crashes from incorrect voltage settings
Synaptics Berlin:
- enable the correct hardware timer driver
Texas Instruments K2G:
- fix a boot regression in the power domain code
TEE drivers:
- fix regression in TEE "login" method
SCMI drivers:
- multiple code fixes for corner cases in newly added code
MAINTAINERS file:
- move Kukjin Kim and Sangbeom Kim to credits (used to work on
Samsung Exynos)
- Masahiro Yamada is stepping down as Uniphier maintainer
I did not include a series of patches that work around a regression
caused by a bugfix in an ethernet phy driver that resulted in an
inadvertent DT binding change. This is still under discussion"
* tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: ti: ti_sci_pm_domains: check for proper args count in xlate
ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board
ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board
ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"
ARM: dts: mmp3: Add power domain for the camera
arm64: berlin: Select DW_APB_TIMER_OF
dt-bindings: sram: sunxi-sram: add V3s compatible string
MAINTAINERS: Move Sangbeom Kim to credits
MAINTAINERS: Move Kukjin Kim to credits
MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver
ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default
ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default
arm64: defconfig: Build in CONFIG_GPIO_MXC by default
arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
arm64: dts: amlogic: add missing ethernet reset ID
firmware: arm_scmi: Fix duplicate workqueue name
firmware: arm_scmi: Fix locking in notifications
...
|
||
|
Linus Torvalds
|
7ba4d86750 |
drm fixes for 5.10-rc2
docs: - kernel doc fixes core: - fix shmem helpers dma-buf mmap bug amdgpu: - Add new navi1x PCI ID - GPUVM reserved area fixes - Misc display fixes - Fix bad interactions between display code and CONFIG_KGDB - Fixes for SMU manual fan control and i2c nouveau: - endian regression fix for old gpus - buffer object refcount fix - uapi start/end alignment fix - display notifier fix - display clock checking fixes i915: - Fix max memory region size calculation - Restore ILK-M RPS support, restoring performance - Reject 90/270 degreerotated initial fbs panel: - mantix reset fixes sun4i: - scalar fix vc4: - hdmi audio fixes v3d: - fix double free -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJfm3NLAAoJEAx081l5xIa+9nAP/Rf+N8BXp/xzL2DaxqZmgcMs NokAFcphG8rh+ub04g3QPCgEQlWLydD8vS7WGAmIGPn3eCcio6Lv7TiWDQbFq3f+ 504RlpoIiHp6dC4pZi1LXeXSSi/JfbnHsysXEe89kJ0tjPrj7zg16EDOyW5VCEA9 OnUIM75d0a26xLXOpJQtKWwls/6zMvdNB67yyiT+SNCyAYq3F/j2vTZRTUaA8Dxc XpcZajPdi4kQATqrTM35ja7pA15meJSwC6c/3QBWVtOaFMFO2mj6FYrs5Zp7H7/y guBEEs8Ga5FIe/Hj05s+KgSSXcqiZXrcBopUwYgjDOpBkY9E1eOLAZalBEcU5kRx gt7emX3BIDC7MZ0vNTHULHI5t22KqqXqSk/kPvK3da6h6h7ZQjSERfjthiThmUFH 9cS6dCdzfatoU+dpaHvkU82J326geh5UdvspNYjkZjJVYK28zCH2S/jx01yP9vgX eKS3PZ44NOGHtB9H2UXeTRL44RmFp7D+fn38499f+nyy1WaJt7dEG4s3toBGnB8N egWnBsbYU+sISNtdSrlZqABA/+Ds5IEXZ2gO8F/dzw3BckGJX6Hrfmnfa2m2y4Wo 1aJa8DG0NinbBkGIEJEPvb1KXf5VdGhpXoD9t8xyA0NmKmaHwi6S16gy8rEsw/5E IAp6QFxfTHunAOs3PM+O =/nSY -----END PGP SIGNATURE----- Merge tag 'drm-fixes-2020-10-30-1' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "A busier rc2 than normal, have larger sets of fixes for amdgpu + nouveau, along with some i915, docs, core, panel, sun4i, v3d, vc4 fixes. Nothing spooky though or pumpkin related. docs: - kernel doc fixes core: - fix shmem helpers dma-buf mmap bug amdgpu: - Add new navi1x PCI ID - GPUVM reserved area fixes - Misc display fixes - Fix bad interactions between display code and CONFIG_KGDB - Fixes for SMU manual fan control and i2c nouveau: - endian regression fix for old gpus - buffer object refcount fix - uapi start/end alignment fix - display notifier fix - display clock checking fixes i915: - Fix max memory region size calculation - Restore ILK-M RPS support, restoring performance - Reject 90/270 degreerotated initial fbs panel: - mantix reset fixes sun4i: - scalar fix vc4: - hdmi audio fixes v3d: - fix double free" * tag 'drm-fixes-2020-10-30-1' of git://anongit.freedesktop.org/drm/drm: (42 commits) drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid() drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid() drm/nouveau/device: fix changing endianess code to work on older GPUs drm/nouveau/gem: fix "refcount_t: underflow; use-after-free" drm/nouveau/kms/nv50-: Program notifier offset before requesting disp caps drm/nouveau/nouveau: fix the start/end range for migration drm/i915: Reject 90/270 degree rotated initial fbs drm/i915: Restore ILK-M RPS support drm/i915/region: fix max size calculation drm/vc4: Rework the structure conversion functions drm/vc4: hdmi: Add a name to the codec DAI component drm/shme-helpers: Fix dma_buf_mmap forwarding bug drm/vc4: hdmi: Avoid sleeping in atomic context drm/amdgpu/pm: fix the fan speed in fan1_input in manual mode for navi1x drm/amd/pm: fix the wrong fan speed in fan1_input drm/amdgpu/swsmu: drop smu i2c bus on navi1x drm/vc4: drv: Add error handding for bind drm: drm_print.h: fix kernel-doc markups drm: kernel-doc: drm_dp_helper.h: fix a typo drm: kernel-doc: add description for a new function parameter ... |
||
|
Rob Herring
|
f84e2c5c52 |
dt-bindings: Another round of adding missing 'additionalProperties/unevalutatedProperties'
Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
62298364bd |
dt-bindings: Explicitly allow additional properties in board/SoC schemas
In order to add meta-schema checks for additional/unevaluatedProperties being present, all schema need to make this explicit. As the top-level board/SoC schemas always have additional properties, add 'additionalProperties: true'. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201005183830.486085-4-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
6ad8838de4 |
dt-bindings: More whitespace clean-ups in schema files
Clean-up incorrect indentation, extra spaces, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (now integrated into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-gpio@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sam Ravnborg <sam@ravnborg.org> # for display Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Ricardo Cañuelo
|
5c024e68d7 |
mfd: google,cros-ec: add missing properties
Add missing properties that are currently used in the examples of subnode bindings and in many DTs. Also updates the example in sound/google,cros-ec-codec.yaml to comply with the google,cros-ec binding. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-4-ricardo.canuelo@collabora.com [robh: Add missing '#address-cells' and '#size-cells'] Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Ricardo Cañuelo
|
50d68feee0 |
dt-bindings: input: convert cros-ec-keyb to json-schema
Convert the google,cros-ec-keyb binding to YAML and add it as a property of google,cros-ec.yaml Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-3-ricardo.canuelo@collabora.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Ricardo Cañuelo
|
1acd4577a6 |
dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema
Convert the google,cros-ec-i2c-tunnel binding to YAML and add it as a property of google,cros-ec.yaml. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-2-ricardo.canuelo@collabora.com [robh: add ref to i2c-controller.yaml] Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Maxime Ripard
|
0537036661
|
Merge remote-tracking branch 'drm-misc/drm-misc-next-fixes' into drm-misc-fixes
We have a few leftovers from the merge window period in drm-misc-next-fixes, let's bring them into drm-misc-fixes Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
||
|
Icenowy Zheng
|
7d54eb90cd |
dt-bindings: sram: sunxi-sram: add V3s compatible string
Add compatible string for V3s, with H3 one as fallback. This is used in device tree now, but not standardized in DT binding. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201003235018.1121618-2-icenowy@aosc.io Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Fabien Parent
|
f83b03fc72 |
dt-bindings: mailbox: mtk-gce: fix incorrect mbox-cells value
As the binding documentation says, #mbox-cells must have a value of 2,
but the example use a value 3. The MT8173 device tree correctly use
mbox-cells = <2>. This commit fixes the example.
Fixes:
|
||
|
Dan Murphy
|
194810f784 |
dt-bindings: leds: Update devicetree documents for ID_RGB
Update the leds/common.yaml to indicate that the max color ID is 9. Reflect the same change in the leds-class-multicolor.yaml Reported-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20201016115703.30184-1-dmurphy@ti.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
e533cda12d |
ARM: Devicetree updates
As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TVacPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx37MMP/imMO5e0QY1/7xxXWm4Kgc/Uffqw2Dvhj74a 4Nrudwz6oUFGpZzIFYxqeCeWwotjA0nXmvM4Nl/SbxtlbV6nY/JrOL1OJToaGY0z Oc1jdA0MdXITdi6Xl5PTRqDeIHTSUmTclZWi5gvT7LFEvHog3mquJ7PiNTrjyuV0 9BmHipwfmH6V5gDJZvN2dDlkhy0cpQKJFw7ylKCL89UNiEAd2QtNG0d0RLdz7yPX IGdecFelOhG9MSZyuFYYB2HOI33ukjZ9dA+yFy7BWOqegf/Z5hI02mxpke7Sys/5 4XEN7ksSSYr6sm3h9XNW++IYkapZ9y/ZW+sQdiBZ3GMOwMXj02TdRkpC7f+FgAPo Hl7yXodGmXynL6ULu7/lIbBvqfWkLcwfVCYZx6PoWRE2q5g5ifoYp9b8kI5cLXrb BJn85XIuIaoO0cgrq7EzZnksaiwY1CNL84mYgkKRCGbBoJKHRiU+8Ilm5SKzk3kq KJ0gmbwFMjvTYxs3g6LPCo0jUNLjmLQMr0tL7iHDWkk5uqA+gfjKSLQfPby3jrMr 6RDZBzMB+tPz1e++RWo41XD/Mm2kw8MGstsCOLzk2TdLh7e3fPfU4g7m0aqs/Q1y +LCqshffF/XVzV2uTFHDUGWufIM9nY6rdzuBc+JACJ5E+QyDg1tGKtMB3TYqgdN2 aRY3NLSv =xjfB -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ... |
||
|
Linus Torvalds
|
2e368dd2bb |
ARM: SoC-related driver updates
Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms. -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TUboPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3T4YP/R5pjF2C1gt8FrCaG4IfhIY1VHWelfPcB5qB RC7Pn4MCRCEY+10YPXA70oS6KBaC+gtZ4bPeInzfLXh1ynFJJb+XtAIxoRhnkEw+ /R979wNcIls9JqkvnHWFx29Y008W2ZNcXVNKH7O2Gxy+eKzDcTMsoH/zj8xWrV5b +eBllTzGU4RArYRJdcwOBQwMO6L2pzADHZ7hGMAY//8fo+qrxg8b9EINsH1UHCa8 gQdWdVlmv6GeLB6RYLRBCWxpW4jOLDqEAvyDV84QQmYHvzD9tqJExNR0hfGTs4TU TZWK7LWSNqF0ujQUbFh9Ikcx6DypU1gvE7LKhCDrf4D7HLRX5v4BjGH+xtVtjsyD xzh4WEoa3qCNu1mxQjKG8Y6U7bB9cRI2TPVxbbmI4ZuF0njvybecwwOZUBQl4aD4 5x+Df3pO/E5ECLOBeTnLgvw20fcjHv4HP8l63B6ADb31FUiZrJXItvayY5qXWe+P HSgUykmVA4nd4PnLsSj9seyWqOTIqUZ3U3TsmfxIQh2Otie01okwuHb1J7ErO/u0 W148SgSwVbnkPxjbBHKGgC2r+Q/AjSDGRBYL0ThIVFUztxTBBwhj3FIvMnyyxTIj yFBY14KQ8FcNUs8DrbPCaAx/RDCB02IHdvvIlyTmU3RBq7UhJVIglpLzzo2ed9F2 5u/aVH3y =tfPb -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ... |
||
|
Linus Torvalds
|
e731f3146f |
ARM: SoC platform updates
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
|
||
|
Linus Torvalds
|
bd7e8c996f |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ... |
||
|
Linus Torvalds
|
3cb12d27ff |
Fixes for 5.10-rc1 from the networking tree:
Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late
in the 5.9 cycle started depending on a return code from
a function which changed with the 5.10 PR from the usb subsystem
Current release - regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous releases - regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu()
to synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems;
the property is not populated correctly by the firmware,
but firmware configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is
light and only wants to schedule napi (and do so through
a _irqoff() variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ceke
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
|
||
|
Guido Günther
|
2580a493a9 |
dt-binding: display: Require two resets on mantix panel
We need to reset both for the panel to show an image.
Fixes:
|
||
|
Linus Torvalds
|
1553d96854 |
remoteproc updates for v5.10
This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl+Rsv8bHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FWPYQAN8X/Y+PT29BhLDRIbGv T9BceEIM2j936eovEzKIwwgbAb1sb62F71Q9Ksi9BWHzBslGlv79aia6ilekc3N1 O+SjZ6G/bKLWtWc+GOkXRbSe0FOHnJRSEgj5Uugz3fVxPxl2IQfxn6gp557SMG38 HbrrvDelzJrtavsUCF0GvMrHZ5JUaWNxRF2xlMLehB431G5ah3hdPIrcClDcF8BG TWuXPtjQbnVTV6hoCsnO747YQDmo6nkR5ASJ/WZ+5YHUKG8aQSWepEanWasYZJQ6 i/i6rUHhuMEVVeJ4m6dis5Zi08lLuHYnSXrtPc76quBT+9sW1El64CdWR0p4wUoQ dki+i0aMqaD6CS9yoytEKG7mmdmw/ROHD/hq9sJY8yL3mkWyXLGoWBkPIFi636bI dpE+q5/PjbuiKkhXQndPURbv4eQWKpZ2RlGBXMu82MxLxqnM/0nVabvY972kepni yx8rN+MecqNpN+UHES+8m91M8eFvFm7HH7K6KU3LY8FGQ5WOJMFcV8OPTCbfeGy4 GmlhYhRx9D2wcb4M+jEL+4nzQoxzqbueUAylBbalDppsDVQVB/NddlTSZLclkhtT nmR4/mSXNArVtB7gh0/0LCcHtL1E0SHpVTa0kNdZDSK6qWVG8MR3N7sPtIW84bFl 7BPIvEs5YNsBL+8FcXzU9TMI =FhqD -----END PGP SIGNATURE----- Merge tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot" * tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc/mediatek: Remove non-standard dsb() remoteproc: Add recovery configuration to the sysfs interface remoteproc: Add coredump as part of sysfs interface remoteproc: Change default dump configuration to "disabled" remoteproc: k3-r5: Add loading support for on-chip SRAM regions remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc/mediatek: Add support for mt8192 SCP remoteproc: Fixup coredump debugfs disable request remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot remoteproc/mediatek: fix null pointer dereference on null scp pointer remoteproc: stm32: Fix pointer assignement remoteproc: scp: add COMPILE_TEST dependency |
||
|
Linus Torvalds
|
3fec0eaaf0 |
This pull request contains zero diff to the core framework. It is a collection
of various clk driver updates. The biggest driver updates in terms of lines of
code is the Allwinner driver, closely followed by the Qualcomm and Mediatek
drivers. All of those hit high because we add so many lines of clk data. Coming
in fourth place is i.MX which also adds a bunch of clk data. This accounts for
the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for various clk
drivers that have baked in linux-next for a while. I suppose one highlight or
theme is that more clk drivers are being updated to work as modules, which is
interesting to see such critical SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory
-----BEGIN PGP SIGNATURE-----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=sKI8
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This contains no changes to the core framework. It is a collection of
various clk driver updates.
The biggest driver updates in terms of lines of code is the Allwinner
driver, closely followed by the Qualcomm and Mediatek drivers. All of
those hit high because we add so many lines of clk data. Coming in
fourth place is i.MX which also adds a bunch of clk data. This
accounts for the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for
various clk drivers that have baked in linux-next for a while. I
suppose one highlight or theme is that more clk drivers are being
updated to work as modules, which is interesting to see such critical
SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being
dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware
documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
clk: imx8mq: Fix usdhc parents order
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
clk: at91: sam9x60: support only two programmable clocks
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
clk: clk-prima2: fix return value check in prima2_clk_init()
clk: mmp2: Fix the display clock divider base
clk: pxa: Constify static struct clk_ops
clk: baikal-t1: Mark Ethernet PLL as critical
clk: qoriq: modify MAX_PLL_DIV to 32
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
...
|
||
|
Linus Torvalds
|
ceae608a54 |
pwm: Changes for v5.10-rc1
This release cycle's updates are mostly cleanup and some minor fixes. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl+RqTAZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoTebEAC93XRmQaBaKk9acgY2escx qGkEzCdzWJJwKC18c1Zkm6OQo0vkfK0mHYqAMS/R+IioCXxGHf6d8qYXPwU4rOwl J6cGJqSRCYVmc37i3DKCgRFEeoKrJ1/Hgpr6/aGwkFcdPe0rjU/fKwxE3XqDJkGP +l97FqgagVZhSSsmuemT9nQbmWbHOiuIxS7Gr+zxgSp0npuoogOMbfc+d0loofLI YMzzu/Mr5h516XIYHzus1sZZslnVg6mJS8Fr5FDnYXECE344SsV4vQRJqptvqD1W MxAjeucvzNNtyzXcQ5HZwvsY8aMOExKQi58Hq2WA1rXrk7YQ5nj2QroWynRUOMnV BFM8dPoFNmsZTt4/4ZVHJQw3hAzLfjuucum782vuQPmf/y78mfHSo2yzuF9vdTXm Z4pbAxfl/TJUBsJgQ0uJdZ9GXffkywUPjbqj71gxt6sEp/0xdLWtw4fhEXT+Ehle XyNNLuW3Ge5D+5ALwN9wLKmiWX6qLqEj1uVuVF0Tp7dF3A99vbD6J9oQat8fL8fP LS7ANAAgSJz8LDQgj6iXuPukNv1pp00WvcGFqP5KMTPGMaxYTTXFH5hmm1yqHQU+ sHlEVZbcCqIqGLz7kvmGfgHYTZKGLYqBdvXN3/LasxSRqyYU/c4/ePAM9KSo3kbs oO7p6e6WaaokEb9ftMEWJg== =zEte -----END PGP SIGNATURE----- Merge tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This release cycle's updates are mostly cleanup and some minor fixes" * tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support pwm: Allow store 64-bit duty cycle from sysfs interface pwm: img: Fix null pointer access in probe pwm: pca9685: Disable unused alternative addresses pwm: pca9685: Use BIT() macro instead of shift pwm: pca9685: Make comments more consistent pwm: sun4i: Simplify with dev_err_probe() pwm: sprd: Simplify with dev_err_probe() pwm: sifive: Simplify with dev_err_probe() pwm: rockchip: Simplify with dev_err_probe() pwm: jz4740: Simplify with dev_err_probe() pwm: bcm2835: Simplify with dev_err_probe() pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro pwm: rockchip: Keep enabled PWMs running while probing dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support |
||
|
Linus Torvalds
|
00937f36b0 |
pci-v5.10-changes
-----BEGIN PGP SIGNATURE-----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=RCFo
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
|
||
|
Linus Torvalds
|
f804b31594 |
linux-watchdog 5.10-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAl+QLMUACgkQ+iyteGJfRsreMACcDuI5w/3sJ5kmjasDm0e7dLte 20gAoL4kLcLAD2v8HiV8RPR+HYyvuic5 =MLjG -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Toshiba Visconti watchdog driver - it87_wdt: add IT8772 + IT8784 - several fixes and improvements * tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Add Toshiba Visconti watchdog driver watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device watchdog: it87_wdt: add IT8784 ID watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3 watchdog: renesas_wdt: support handover from bootloader watchdog: imx7ulp: Watchdog should continue running for wait/stop mode watchdog: rti: Simplify with dev_err_probe() watchdog: davinci: Simplify with dev_err_probe() watchdog: cadence: Simplify with dev_err_probe() watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h> watchdog: Use put_device on error watchdog: Fix memleak in watchdog_cdev_register watchdog: imx7ulp: Strictly follow the sequence for wdog operations watchdog: it87_wdt: add IT8772 ID watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed drivers: watchdog: rdc321x_wdt: Fix race condition bugs |
||
|
Linus Torvalds
|
b7769c45b8 |
RTC for 5.10
Subsystem:
- new generic DT properties: aux-voltage-chargeable, trickle-voltage-millivolt
New driver:
- Microcrystal RV-3032
Drivers:
- ds1307: use aux-voltage-chargeable
- r9701, rx8010: modernization of the driver
- rv3028: fix clock output, trickle resistor values, RAM configuration
registers
-----BEGIN PGP SIGNATURE-----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=o9I0
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A new driver this cycle is making the bulk of the changes and the
rx8010 driver has been rework to use the modern APIs.
Summary:
Subsystem:
- new generic DT properties: aux-voltage-chargeable,
trickle-voltage-millivolt
New driver:
- Microcrystal RV-3032
Drivers:
- ds1307: use aux-voltage-chargeable
- r9701, rx8010: modernization of the driver
- rv3028: fix clock output, trickle resistor values, RAM
configuration registers"
* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: r9701: set range
rtc: r9701: convert to devm_rtc_allocate_device
rtc: r9701: stop setting RWKCNT
rtc: r9701: remove useless memset
rtc: r9701: stop setting a default time
rtc: r9701: remove leftover comment
rtc: rv3032: Add a driver for Microcrystal RV-3032
dt-bindings: rtc: rv3032: add RV-3032 bindings
dt-bindings: rtc: add trickle-voltage-millivolt
rtc: rv3028: ensure ram configuration registers are saved
rtc: rv3028: factorize EERD bit handling
rtc: rv3028: fix trickle resistor values
rtc: rv3028: fix clock output support
rtc: mt6397: Remove unused member dev
rtc: rv8803: simplify the return expression of rv8803_nvram_write
rtc: meson: simplify the return expression of meson_vrtc_probe
rtc: rx8010: rename rx8010_init_client() to rx8010_init()
rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
rtc: ds1307: consider aux-voltage-chargeable
rtc: ds1307: store previous charge default per chip
...
|
||
|
Linus Torvalds
|
b5df4b5c28 |
Merge branch 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - if a host can be a client, too, the I2C core can now use it to emulate SMBus HostNotify support (STM32 and R-Car added this so far) - also for client mode, a testunit has been added. It can create rare situations on the bus, so host controllers can be tested - a binding has been added to mark the bus as "single-master". This allows for better timeout detections - new driver for Mellanox Bluefield - massive refactoring of the Tegra driver - EEPROMs recognized by the at24 driver can now have custom names - rest is driver updates * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits) Documentation: i2c: add testunit docs to index i2c: tegra: Improve driver module description i2c: tegra: Clean up whitespaces, newlines and indentation i2c: tegra: Clean up and improve comments i2c: tegra: Clean up printk messages i2c: tegra: Clean up variable names i2c: tegra: Improve formatting of variables i2c: tegra: Check errors for both positive and negative values i2c: tegra: Factor out hardware initialization into separate function i2c: tegra: Factor out register polling into separate function i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg() i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() i2c: tegra: Rename wait/poll functions i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear() i2c: tegra: Remove likely/unlikely from the code i2c: tegra: Remove outdated barrier() i2c: tegra: Clean up variable types i2c: tegra: Reorder location of functions in the code i2c: tegra: Clean up probe function ... |
||
|
Bjorn Helgaas
|
f95f023d11 |
Merge branch 'remotes/lorenzo/pci/rcar'
- Document R8A774A1, R8A774B1, R8A774E1 endpoint support in DT (Lad Prabhakar) - Add R8A774A1, R8A774B1, R8A774E1 (RZ/G2M, RZ/G2N, RZ/G2H) IDs to endpoint test (Lad Prabhakar) - Add device tree support for R8A7742 (Lad Prabhakar) - Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva) * remotes/lorenzo/pci/rcar: dt-bindings: PCI: rcar: Add device tree support for r8a7742 PCI: rcar-gen2: Use fallthrough pseudo-keyword misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller dt-bindings: pci: rcar-pci-ep: Document r8a774e1 misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1 |
||
|
Bjorn Helgaas
|
924bb1f9b0 |
Merge branch 'remotes/lorenzo/pci/dwc'
- Fix designware-ep Header Type check (Hou Zhiqiang) - Use DBI accessors instead of own config accessors (Rob Herring) - Allow overriding bridge pci_ops (Rob Herring) - Allow root and child buses to have different pci_ops (Rob Herring) - Add default dwc pci_ops.map_bus (Rob Herring) - Use pci_ops for root config space accessors in al, exynos, histb, keystone, kirin, meson, tegra (Rob Herring) - Remove dwc own/other config accessor ops (Rob Herring) - Use generic config accessors in dwc (Rob Herring) - Also call .add_bus() callback for root bus (Rob Herring) - Convert keystone .scan_bus() callback to use pci_ops.add_bus (Rob Herring) - Convert dwc to use pci_host_probe() (Rob Herring) - Remove dwc root_bus pointer (Rob Herring) - Remove storing of PCI resources in dwc-specific structs (Rob Herring) - Simplify config space handling (Rob Herring) - Drop keystone duplicated DT num-viewport handling (Rob Herring) - Check CONFIG_PCI_MSI in dw_pcie_msi_init() instead of duplicating it in all the drivers (Rob Herring) - Remove imx6 duplicate PCIE_LINK_WIDTH_SPEED_CONTROL definition (Rob Herring) - Add dwc num_lanes for use when it's lacking from DT (Rob Herring) - Ensure "Fast Link Mode" simulation environment setting is cleared (Rob Herring) - Drop meson duplicate number of lanes setup (Rob Herring) - Drop meson unnecessary RC config space init (Rob Herring) - Rework meson config and dwc port logic register accesses (Rob Herring) - Use common PCI register definitions in imx6 and qcom (Rob Herring) - Search for DesignWare PCIe Capability instead of hard-coding its location (Rob Herring) - Use common DesignWare register definitions in tegra (Rob Herring) - Drop keystone unused DBI2 code (Rob Herring) - Make dwc ATU accessors private (Rob Herring) - Centralize link gen setting in dwc (Rob Herring) - Set PORT_LINK_DLL_LINK_EN in common dwc setup code (Rob Herring) - Drop intel-gw unnecessary DT 'device_type' checking (Rob Herring) - Move intel-gw PCI_CAP_ID_EXP discovery to the single place it's used (Rob Herring) - Drop intel-gw unused max_width (Rob Herring) - Move N_FTS (fast training sequence) setup to common dwc setup (Rob Herring) - Convert spear13xx, tegra194 to use DBI accessors (Rob Herring) - Add multiple PFs support for DWC (Xiaowei Bao) - Add MSI-X doorbell mode for endpoint mode (Xiaowei Bao) - Update MSI/MSI-X capability management for endpoints (Xiaowei Bao) - Add layerscape ls1088a and ls2088a compatible strings (Xiaowei Bao) - Update layerscape MSI/MSI-X management (Xiaowei Bao) - Use doorbell to support MSI-X on layerscape (Xiaowei Bao) - Add layerscape endpoint mode support for ls1088a and ls2088a (Xiaowei Bao) - Add layerscape ls1088a node to DT (Xiaowei Bao) - Add Freescale/Layerscape ls1088a to endpoint test (Xiaowei Bao) - Add endpoint test driver data for Layerscape PCIe controllers (Hou Zhiqiang) - Fix 'cast truncates bits from constant value' warning (Gustavo Pimentel) - Add uniphier iATU register description (Kunihiko Hayashi) - Add common iATU register support (Kunihiko Hayashi) - Remove keystone iATU register mapping in favor of generic dwc support (Kunihiko Hayashi) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Fix MSI page leakage in suspend/resume (Jisheng Zhang) - Check whether link is up before attempting config access (best-effort fix even though it's racy) (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI: dwc: Fix MSI page leakage in suspend/resume PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled PCI: keystone: Remove iATU register mapping PCI: dwc: Add common iATU register support dt-bindings: PCI: uniphier-ep: Add iATU register description dt-bindings: PCI: uniphier: Add iATU register description PCI: dwc: Fix 'cast truncates bits from constant value' misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllers misc: pci_endpoint_test: Add LS1088a in pci_device_id table PCI: layerscape: Add EP mode support for ls1088a and ls2088a PCI: layerscape: Modify the MSIX to the doorbell mode PCI: layerscape: Modify the way of getting capability with different PEX PCI: layerscape: Fix some format issue of the code dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a PCI: designware-ep: Modify MSI and MSIX CAP way of finding PCI: designware-ep: Move the function of getting MSI capability forward PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode PCI: designware-ep: Add multiple PFs support for DWC PCI: dwc: Use DBI accessors PCI: dwc: Move N_FTS setup to common setup PCI: dwc/intel-gw: Drop unused max_width PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup() PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' property PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup code PCI: dwc: Centralize link gen setting PCI: dwc: Make ATU accessors private PCI: dwc: Remove read_dbi2 code PCI: dwc/tegra: Use common Designware port logic register definitions PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset PCI: dwc/qcom: Use common PCI register definitions PCI: dwc/imx6: Use common PCI register definitions PCI: dwc/meson: Rework PCI config and DW port logic register accesses PCI: dwc/meson: Drop unnecessary RC config space initialization PCI: dwc/meson: Drop the duplicate number of lanes setup PCI: dwc: Ensure FAST_LINK_MODE is cleared PCI: dwc: Add a 'num_lanes' field to struct dw_pcie PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init() PCI: dwc/keystone: Drop duplicated 'num-viewport' PCI: dwc: Simplify config space handling PCI: dwc: Remove storing of PCI resources PCI: dwc: Remove root_bus pointer PCI: dwc: Convert to use pci_host_probe() PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus PCI: Also call .add_bus() callback for root bus PCI: dwc: Use generic config accessors PCI: dwc: Remove dwc specific config accessor ops PCI: dwc: histb: Use pci_ops for root config space accessors PCI: dwc: exynos: Use pci_ops for root config space accessors PCI: dwc: kirin: Use pci_ops for root config space accessors PCI: dwc: meson: Use pci_ops for root config space accessors PCI: dwc: tegra: Use pci_ops for root config space accessors PCI: dwc: keystone: Use pci_ops for config space accessors PCI: dwc: al: Use pci_ops for child config space accessors PCI: dwc: Add a default pci_ops.map_bus for root port PCI: dwc: Allow overriding bridge pci_ops PCI: dwc: Use DBI accessors instead of own config accessors PCI: Allow root and child buses to have different pci_ops PCI: designware-ep: Fix the Header Type check |
||
|
Ard Biesheuvel
|
acd7aaf51b |
netsec: ignore 'phy-mode' device property on ACPI systems
Since commit |
||
|
Stephen Boyd
|
5f56888fad |
Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', 'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next
- Support qcom SM8150/SM8250 video and display clks - Change how qcom's display port clks work * clk-ingenic: clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks * clk-at91: clk: at91: sam9x60: support only two programmable clocks clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name * clk-kconfig: clk: Restrict CLK_HSDK to ARC_SOC_HSDK * clk-imx: clk: imx8mq: Fix usdhc parents order clk: imx: imx21: Remove clock driver clk: imx: gate2: Fix a few typos clk: imx: Fix and update kerneldoc clk: imx: fix i.MX7D peripheral clk mux flags clk: imx: fix composite peripheral flags clk: imx: Correct the memrepair clock on imx8mp clk: imx: Correct the root clk of media ldb on imx8mp clk: imx: vf610: Add CRC clock clk: imx: Explicitly include bits.h clk: imx8qxp: Support building i.MX8QXP clock driver as module clk: imx8m: Support module build clk: imx: Add clock configuration for ARMv7 platforms clk: imx: Support building i.MX common clock driver as module clk: composite: Export clk_hw_register_composite() clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits * clk-qcom: clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: qcom: Add display clock controller driver for SM8150 and SM8250 dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings clk: qcom: add video clock controller driver for SM8250 clk: qcom: add video clock controller driver for SM8150 dt-bindings: clock: add SM8250 QCOM video clock bindings dt-bindings: clock: add SM8150 QCOM video clock bindings dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs clk/qcom: fix spelling typo clk: qcom: gcc-sdm660: Fix wrong parent_map clk: qcom: dispcc: Update DP clk ops for phy design clk: qcom: gcc-msm8939: remove defined but not used variables clk: qcom: ipq8074: make pcie0_rchng_clk_src static * clk-prima2: clk: clk-prima2: fix return value check in prima2_clk_init() * clk-bcm: clk: bcm2835: add missing release if devm_clk_hw_register fails clk: bcm: rpi: Add register to control pixel bvb clk |
||
|
Stephen Boyd
|
3ab9a54f76 |
Merge branches 'clk-simplify', 'clk-ti', 'clk-tegra', 'clk-rockchip' and 'clk-mediatek' into clk-next
- Small non-critical fixes for TI clk driver - Support Mediatek MT8167 clks * clk-simplify: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_init clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_init * clk-ti: clk: ti: dra7: add missing clkctrl register for SHA2 instance clk: ti: clockdomain: fix static checker warning clk: ti: autoidle: add checks against NULL pointer reference clk: keystone: sci-clk: add 10% slack to set_rate clk: keystone: sci-clk: cache results of last query rate operation clk: keystone: sci-clk: fix parsing assigned-clock data during probe * clk-tegra: clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate() * clk-rockchip: clk: rockchip: Initialize hw to error to avoid undefined behavior clk: rockchip: rk3399: Support module build clk: rockchip: fix the clk config to support module build clk: rockchip: Export some clock common APIs for module drivers clk: rockchip: Export rockchip_register_softrst() clk: rockchip: Export rockchip_clk_register_ddrclk() clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls clk: rockchip: rk3308: drop unused mux_timer_src_p * clk-mediatek: clk: mediatek: Add MT8167 clock support dt-bindings: clock: mediatek: add bindings for MT8167 clocks clk: mediatek: add UART0 clock support |
||
|
Stephen Boyd
|
9d3261628a |
Merge branches 'clk-renesas', 'clk-amlogic', 'clk-allwinner', 'clk-samsung', 'clk-doc' and 'clk-unused' into clk-next
- Remove various unused variables in clk drivers * clk-renesas: clk: renesas: rcar-gen3: Update description for RZ/G2 clk: renesas: cpg-mssr: Add support for R-Car V3U clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0 dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions dt-bindings: power: Add r8a779a0 SYSC power domain definitions clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r) clk: renesas: r8a7742: Add clk entry for VSPR * clk-amlogic: clk: meson: make shipped controller configurable clk: meson: g12a: mark fclk_div2 as critical clk: meson: axg-audio: fix g12a tdmout sclk inverter clk: meson: axg-audio: separate axg and g12a regmap tables clk: meson: add sclk-ws driver * clk-allwinner: clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL clk: sunxi-ng: add support for the Allwinner A100 CCU dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU * clk-samsung: clk: s2mps11: initialize driver via module_platform_driver clk: samsung: Use cached clk_hws instead of __clk_lookup() calls clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions clk: samsung: Add clk ID definitions for the CPU parent clocks clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d clk: samsung: Keep top BPLL mux on Exynos542x enabled * clk-doc: clk: davinci: add missing kerneldoc clk: fixed: add missing kerneldoc * clk-unused: clk: socfpga: agilex: Remove unused variable 'cntr_mux' clk: si5341: drop unused 'err' variable clk: mmp: pxa1928: drop unused 'clk' variable clk: at91: drop unused at91sam9g45_pcr_layout |
||
|
Linus Torvalds
|
38525c6919 |
power supply and reset changes for the v5.10 series
power-supply core: * Add wireless type * Properly document current direction battery/charger driver changes: * New fuel-gauge/charger driver for RN5T618/RN5T619 * New charger driver for BQ25980, BQ25975 and BQ25960 * bq27xxx-battery: add support for TI bq34z100 * gpio-charger: convert to GPIO descriptors * gpio-charger: add optional support for charge current limiting * max17040: add support for max17041, max17043, max17044 * max17040: add support for max17048, max17049, max17058, max17059 * smb347-charger: add DT support * smb247-charger: add SMB345 and SMB358 support * simple-battery: add temperature properties * lots of minor fixes, cleanups and DT binding YAML conversions reset drivers: * ocelot: Add support for Sparx5 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl+IsXoACgkQ2O7X88g7 +prL8RAAprDcwF5irflM2bWwzKnfuNgTjk6P/o9gIWiSJsNA1R3XKJEm6l38givV EhnceGaZXgWg8blh3htd5Z6DNEEFX5ucB9KtQESW5ehM/KGvcEwD7CJilSJejqt4 3AQiFQLa41s4tnBBao/9gp+juSsvwg2NoeCaOa1H2K5oVi7WDmnmQyexa6CAty7b D4Uz8EOfpVi9FvYalffGP7QkA5ZsNWSLRRLJshHCw6QH54+h51F5efhu5S5qxXEA L/yjfFFhiB99df7y4LzvCItfaTGLcLNFfCas4+0yOWnViXosIr9rQk51FihXaDot DBCyF6hHWFDCnymnjMjWclYeatPFw+jnPrjmn+b0mQ/RaTgz30tgvuZurepcCwN/ ZKZftnvN16VAnUYgrE397F706sBZHjE6NonWvpXExawNUznA4h2uTu1bwWhtp5Um gcIjhL0ePEMf1yAYW3iI/l70NfIgPoEep6w+8oyLgV4vvffkKxkHkndoV7ZcS79M OdKbgGq4ZBNTS8ABsjHDO0o+/vBuKa3KE3/2J+916G3mc8FM6WJBfo1mIuwD51GA ASwG4UlE1Kyu91z4rP15GGMwSho7UKvWORB5ECsmfZ8xjiJSRHJAiDhmiaSaZZi0 dc5JKVDdM056IWOuP8THEVG6r3BiG/B1i8eY4YJ6GPv82JP/iks= =QtfI -----END PGP SIGNATURE----- Merge tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add wireless type - properly document current direction Battery/charger driver changes: - new fuel-gauge/charger driver for RN5T618/RN5T619 - new charger driver for BQ25980, BQ25975 and BQ25960 - bq27xxx-battery: add support for TI bq34z100 - gpio-charger: convert to GPIO descriptors - gpio-charger: add optional support for charge current limiting - max17040: add support for max17041, max17043, max17044 - max17040: add support for max17048, max17049, max17058, max17059 - smb347-charger: add DT support - smb247-charger: add SMB345 and SMB358 support - simple-battery: add temperature properties - lots of minor fixes, cleanups and DT binding YAML conversions Reset drivers: - ocelot: Add support for Sparx5" * tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits) power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5 power: supply: bq25980: Fix uninitialized wd_reg_val and overrun power: supply: ltc2941: Fix ptr to enum cast power: supply: test-power: revise parameter printing to use sprintf power: supply: charger-manager: fix incorrect check on charging_duration_ms power: supply: max17040: Fix ptr to enum cast power: supply: bq25980: Fix uninitialized wd_reg_val power: supply: bq25980: remove redundant zero check on ret power: reset: ocelot: Add support for Sparx5 dt-bindings: reset: ocelot: Add Sparx5 support power: supply: sbs-battery: keep error code when get_property() fails power: supply: bq25980: Add support for the BQ259xx family dt-binding: bq25980: Add the bq25980 flash charger power: supply: fix spelling mistake "unprecise" -> "imprecise" power: supply: test_power: add missing newlines when printing parameters by sysfs power: supply: pm2301: drop duplicated i2c_device_id power: supply: charger-manager: drop unused charger assignment power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI ... |
||
|
Alexandre Belloni
|
5ebe59a505 |
dt-bindings: rtc: rv3032: add RV-3032 bindings
Document the Microcrystal RV-3032 device tree bindings Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201013144110.1942218-2-alexandre.belloni@bootlin.com |
||
|
Alexandre Belloni
|
61ee0674bc |
dt-bindings: rtc: add trickle-voltage-millivolt
Some RTCs have a trickle charge that is able to output different voltages depending on the type of the connected auxiliary power (battery, supercap, ...). Add a property allowing to specify the necessary voltage. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201013144110.1942218-1-alexandre.belloni@bootlin.com |
||
|
Linus Torvalds
|
373014bb51 |
- arm: implementation of mhu as a doorbell driver
conversion of dt-bindings to json-schema - mediatek: fix platform_get_irq error handling - bcm: convert tasklets to use new tasklet_setup api - core: fix race cause by hrtimer starting inappropriately -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAl+KOnQACgkQf9lkf8eY P5VgEQ/+I6YNUGGotegZsloTcHwfMwpuAuMMOfy+yZpe3iQPWcR4ZIIXqnieAKSG Z+y8gWurIq5P46JKAnoCt+TyyllGZVMo+/ioaXCGutx085OEDKMPj6v5XKrPNRQ/ 5CqOSfLiD8Zpr6BYjEQgMgxA/qr2shDRNsbiXtk3u3ObgCaCKnXSLbto6TOnoI2n vB7H1HTjj7Yr24Tkxnebc1KdjhJX2VJYTLftCeRODT/3CeUk4uJDao20jf6TxAZw ZR7j2kMcbEHQ3tqsSIy3xoukbGK2CktHeQJGqetGR1CK6TQsg7sNFT0WeF8ZwL1w kX5rqDg8dneIpsN53K+NZCE+uUGYHDV8uKNQN80ZhzUkD1gnk680TPiSDFz+A0T3 4adwxEFJqRyn5ar3rGPFRT4V8wgsNVoGZNE0ExFB1C87HLOHedsln5AH7HXcq7yo vICLuV9F6ETrHvb2mRcq/2RaG7c7njMhJ0bopoG8epzMKyosppwvaCuNJgC38T8D nS0zpv0mGG9Ti5FODFyv4vHAKmBjGLBpVNGbaVGQO2RziOYsOHJ5xq+jHzRbdfkd UGmozyHPYfVzC2wLCW/oLifdZ6+cisRT3jSMoYvxRx2UxGbKvVHOveVhspWXf66v HTNOOFOASsvHODj8dt80LWLYSI1fTTkOZH+xkWipphISRKOtMkg= =OcQc -----END PGP SIGNATURE----- Merge tag 'mailbox-v5.10' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - arm: implementation of mhu as a doorbell driver and conversion of dt-bindings to json-schema - mediatek: fix platform_get_irq error handling - bcm: convert tasklets to use new tasklet_setup api - core: fix race cause by hrtimer starting inappropriately * tag 'mailbox-v5.10' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: avoid timer start from callback maiblox: mediatek: Fix handling of platform_get_irq() error mailbox: arm_mhu: Add ARM MHU doorbell driver mailbox: arm_mhu: Match only if compatible is "arm,mhu" dt-bindings: mailbox: add doorbell support to ARM MHU dt-bindings: mailbox : arm,mhu: Convert to Json-schema mailbox: bcm: convert tasklets to use new tasklet_setup() API |
||
|
Linus Torvalds
|
6f78b9acf0 |
NAND Core changes:
* Drop useless 'depends on' in Kconfig * Add an extra level in the Kconfig hierarchy * Trivial spellings * Dynamic allocation of the interface configurations * Dropping the default ONFI timing mode * Various cleanup (types, structures, naming, comments) * Hide the chip->data_interface indirection * Add the generic rb-gpios property * Add the ->choose_interface_config() hook * Introduce nand_choose_best_sdr_timings() * Use default values for tPROG_max and tBERS_max * Avoid redefining tR_max and tCCS_min * Add a helper to find the closest ONFI mode * bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: * fsl-upm: Deprecation of specific DT properties * fsl_upm: Driver rework and cleanup in favor of ->exec_op() * Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use * brcmnand: ECC error handling on EDU transfers * brcmnand: Don't default to EDU transfers * qcom: Set BAM mode only if not set already * qcom: Avoid write to unavailable register * gpio: Driver rework in favor of ->exec_op() * tango: ->exec_op() conversion * mtk: ->exec_op() conversion Raw NAND chip drivers changes: * toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 * toshiba: Implement ->choose_interface_config() for TC58NVG0S3E * toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 * hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: * DMA support for TI's AM654 HyperBus controller driver. * HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: * Support for Winbond w25q64jwm flash * Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: * intel-spi Add Alder Lake-S PCI ID MTD Core changes: * mtdoops: Don't run panic write twice * mtdconcat: Correctly handle panic write * Use DEFINE_SHOW_ATTRIBUTE -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAl+JjRcWHHJpY2hhcmRA c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wUmhEACw6IQ5JY7TraffhziGWkHbnEHm Awy1uOCzGUYcHviA+3NOcnBl2XcTsQ6LXf0aAi28/+1NHpLcPeMKA0+QBXGqhMGy z56+YjXG5LAMlHe74YeaSH7D1uyv3HcfYAb+6fmvOK6IR3sVfnQ0apKnt/Vs5lLv vyfYeHgzAYALCxJLVsfVAQHMJApR5qdYvDIk/keur+ds3ypmurwBXJvbRuowRMo3 n2/S0PJii6LdKoa9zHmsGLr5uPvePbeiudT5ZmsN+QylZT8DW5CVl95K3gKhbrwi dP9EAXv/QCSbX8BFK3jsP8MVQkic8vVROPtlA+LZqfeCGEw02wzVqXEN+kkIJJHx 5BXmJOkjhk1QAMR4ZB6ih79BIN0XuynEMNLqXSz6LFoRAQ7ZXHvyyKruHbFAVDc5 bRcEUiW0+FQMfCzYtjrmGFl3YOv5mK2yLJXbVZDHo1usgdzEvpdp56ormXXWGO5l JKW/8PRPY4hKVNaSteXUiMynVW1hiQYNgvnqi/3g6UCqg1BqpAoPjrf8kuu/gSCq 627Ni4dTtlfN3pKHOPOXEPy2faKhiOmJTH/0NqCC/LgNJn533t2H+Aj6VX9fGCPh 2/Idj6OWbfwupLnxUTacxCyoXHVyfdBPsFlw3qae2gMkjnpjsRuJODI20iA+0kad PMRnybl5hhX5HIKTBQ== =X56H -----END PGP SIGNATURE----- Merge tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: - DMA support for TI's AM654 HyperBus controller driver. - HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi Add Alder Lake-S PCI ID MTD Core changes: - mtdoops: Don't run panic write twice - mtdconcat: Correctly handle panic write - Use DEFINE_SHOW_ATTRIBUTE" * tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits) mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled mtd: hyperbus: add Renesas RPC-IF driver Revert "mtd: spi-nor: Prefer asynchronous probe" mtd: parsers: bcm63xx: Do not make it modular mtd: spear_smi: Enable compile testing mtd: maps: vmu-flash: fix typos for struct memcard mtd: physmap: Add Baikal-T1 physically mapped ROM support mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu mtd: onenand: simplify the return expression of onenand_transfer_auto_oob mtd: rawnand: cadence: remove a redundant dev_err call mtd: rawnand: ams-delta: Fix non-OF build warning mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() mtd: rawnand: Introduce nand_set_ecc_on_host_ops() mtd: rawnand: atmel: Check return values for nand_read_data_op mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size() mtd: rawnand: qcom: Simplify with dev_err_probe() mtd: rawnand: marvell: Fix and update kerneldoc mtd: rawnand: marvell: Simplify with dev_err_probe() mtd: rawnand: gpmi: Simplify with dev_err_probe() mtd: rawnand: atmel: Simplify with dev_err_probe() ... |
||
|
Linus Torvalds
|
5a77b6a013 |
- Fix Kconfig typo "acces" -> "access" (Colin Ian King)
- Use dev_error_probe() to simplify the error handling on imx and imx8 platforms (Anson Huang) - Use dedicated kobj_to_dev() instead of container_of() in the sysfs core code (Tian Tao) - Fix coding style by adding braces to a one line conditional statement on rcar (Geert Uytterhoeven) - Add DT binding documentation for the r8a774e1 platform and update the Kconfig description supporting RZ/G2 SoCs (Lad Prabhakar) - Simplify the return expression of stm_thermal_prepare on the stm32 platform (Qinglang Miao) - Fix the unit in the function documentation for the idle injection cooling device (Zhuguang Qing) - Remove an unecessary mutex_init() in the core code (Qinglang Miao) - Add support for keep alive events in the core code and the specific int340x (Srinivas Pandruvada) - Remove unused thermal zone variable in devfreq and cpufreq cooling devices (Zhuguang Qing) - Add the A100's THS controller support (Yangtao Li) - Add power management on the omap3's bandgap sensor (Adam Ford) - Fix a missing nlmsg_free in the netlink core error path (Jing Xiangfeng) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl+GwbYACgkQqDIjiipP 6E8IFAf/UnO1HqfK96FnVJXx5ClXFE8PQhdVejxBEsNCJqUOwlqfpyONy7mgwABb EuOvp5ZLX6ly9xG6J4NJhE4gN4DxqRKe0S3bQMU+DX8TQHc3otDKHILJbHrJdOY+ BYZpGxuCjU9yZrsJopztZIcpG7cF78d39XCJVSrBhoOBqPLXNGZkUUzOv9+QQti3 ipdhqB3kUzkgDFgIrDxX8t0vybQZSbiRWNUGrw/WQjMsG0NGIarCUHW4wiaea6gU L2x1QDR5h9hxEAJiTBarOtF7ZlE15fpria0mWfTgmNMArMEtRBL60kBnmYa4o3EG CseR7x1MdTCSqLCzKGfQyKv5SFgnVg== =P6zv -----END PGP SIGNATURE----- Merge tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Fix Kconfig typo "acces" -> "access" (Colin Ian King) - Use dev_error_probe() to simplify the error handling on imx and imx8 platforms (Anson Huang) - Use dedicated kobj_to_dev() instead of container_of() in the sysfs core code (Tian Tao) - Fix coding style by adding braces to a one line conditional statement on rcar (Geert Uytterhoeven) - Add DT binding documentation for the r8a774e1 platform and update the Kconfig description supporting RZ/G2 SoCs (Lad Prabhakar) - Simplify the return expression of stm_thermal_prepare on the stm32 platform (Qinglang Miao) - Fix the unit in the function documentation for the idle injection cooling device (Zhuguang Qing) - Remove an unecessary mutex_init() in the core code (Qinglang Miao) - Add support for keep alive events in the core code and the specific int340x (Srinivas Pandruvada) - Remove unused thermal zone variable in devfreq and cpufreq cooling devices (Zhuguang Qing) - Add the A100's THS controller support (Yangtao Li) - Add power management on the omap3's bandgap sensor (Adam Ford) - Fix a missing nlmsg_free in the netlink core error path (Jing Xiangfeng) * tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp() thermal: ti-soc-thermal: Enable addition power management thermal: sun8i: Add A100's THS controller support thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate dt-bindings: thermal: sun8i: Add binding for A100's THS controller thermal: cooling: Remove unused variable *tz thermal: int340x: Add keep alive response method thermal: core: Add new event for sending keep alive notifications thermal: int340x: Provide notification for OEM variable change thermal: core: remove unnecessary mutex_init() thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns thermal: Kconfig: Update description for RCAR_GEN3_THERMAL config thermal: stm32: simplify the return expression of stm_thermal_prepare() dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support thermal: rcar_thermal: Add missing braces to conditional statement thermal: Use kobj_to_dev() instead of container_of() thermal: imx8mm: Use dev_err_probe() to simplify error handling thermal: imx: Use dev_err_probe() to simplify error handling drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access" |
||
|
Linus Torvalds
|
54a4c789ca |
docs updates for v5.10-rc1
-----BEGIN PGP SIGNATURE-----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=26wi
-----END PGP SIGNATURE-----
Merge tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
|
||
|
Linus Torvalds
|
09a31a7e37 |
MIPS updates for v5.10:
- removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make usage of usage of 16byte load/stores possible - cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl+Jk/MaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDjyA/9EAEb8woPRsEfbQE8GLgT vW2y2/fSHFJHoYY/t9+G81lJVKsg9TXQ9LyNk3WSU6+a6qELVqmnHY7+e43rSkfG qaxMRJOmwsMU7NWQOy1OSyESHidsAXrGYMY40TKrcClyVbS/Ob6wZ5QbBp+MTEsU ane8Yq/QTS60xIxsS0SZSiQpqzumUn7oHAwCAlqcqo26tV94mtrtsFG4pReqI2gh Bxs2ZoQYdx1/rPGXHV74fwP3Iz1Rwq3Z38FCyK7ME98cTEiLxYs1/ztgL1y0IC07 F3Dv3wmPtCGZtNyqDJxs7lHsbi74owSyoueywNeOA+YV8IzkOCEW0XpgL7vI2gPL OIi+LbH7MXt3P14h5ekzK+dSILg3yNFD152PmGxpUVzVhfDCw+uyUHzHdhZSCF/J aldlDm1wtUV5PacruVbH26amownTsfdei+WTtgGN3QAISmnLjUghsplPZE6KWbGW uPPpuIA2pTwW2FQdXL/WwGZm1k44ii5zX1Cjc55AZISZOzFXqklbuEZbMEM5O76N EFR+zOd4+wueOZOI7vpBTmKSSY/r12Ve25hbMMYeY0G3bbsubcIIIHHRxhdPp/+R 8t+PTC9//bT9r/OKdGV6TDsSJmSZWfaaNd30actDHpss8ruUlNxwWv7awp/z0sOs U+R5CAaVvzQlhxkzdO+M03w= =Aa/Q -----END PGP SIGNATURE----- Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible - cleanups and fixes * tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ... |
||
|
Linus Torvalds
|
9ff9b0d392 |
networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. Allow more than 255 IPv4 multicast interfaces. Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. Allow more calls to same peer in RxRPC. Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. Add TC actions for implementing MPLS L2 VPNs. Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. Support sleepable BPF programs, initially targeting LSM and tracing. Add bpf_d_path() helper for returning full path for given 'struct path'. Make bpf_tail_call compatible with bpf-to-bpf calls. Allow BPF programs to call map_update_elem on sockmaps. Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). Support listing and getting information about bpf_links via the bpf syscall. Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. Add XDP support for Intel's igb driver. Support offloading TC flower classification and filtering rules to mscc_ocelot switches. Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc= =bc1U -----END PGP SIGNATURE----- Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ... |
||
|
Linus Torvalds
|
f065199d4d |
dmaengine updates for v5.10-rc1
Core:
- Mark dma_request_slave_channel() deprecated in favour of dma_request_chan()
- subsystem conversion for tasklet_setup() API
- subsystem removal of local dma_parms for arm drivers
Updates to bunch of driver notably TI, DW and AXI-DMAC
-----BEGIN PGP SIGNATURE-----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=mu9A
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Mark dma_request_slave_channel() deprecated in favour of
dma_request_chan()
- subsystem conversion for tasklet_setup() API
- subsystem removal of local dma_parms for arm drivers
Also updates to bunch of driver notably TI, DW and AXI-DMAC"
* tag 'dmaengine-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (104 commits)
dmaengine: owl-dma: fix kernel-doc style for enum
dmaengine: zynqmp_dma: fix kernel-doc style for tasklet
dmaengine: xilinx_dma: fix kernel-doc style for tasklet
dmaengine: qcom: bam_dma: fix kernel-doc style for tasklet
dmaengine: altera-msgdma: fix kernel-doc style for tasklet
dmaengine: xilinx: dpdma: convert tasklets to use new tasklet_setup() API
dmaengine: sf-pdma: convert tasklets to use new tasklet_setup() API
dt-bindings: Fix 'reg' size issues in zynqmp examples
dmaengine: rcar-dmac: drop double zeroing
dmaengine: sh: drop double zeroing
dmaengine: ioat: Allocate correct size for descriptor chunk
dmaengine: ti: k3-udma: use devm_platform_ioremap_resource_byname
dmaengine: fsl: remove bad channel update
dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_status
dmaengine: pl330: fix argument for tasklet
dmaengine: dmatest: Return boolean result directly in filter()
dmaengine: dmatest: Check list for emptiness before access its last entry
dmaengine: ti: k3-udma-glue: fix channel enable functions
dmaengine: iop-adma: Fix pointer cast warnings
dmaengine: dw-edma: Fix Using plain integer as NULL pointer in dw-edma-v0-debugfs.c
...
|
||
|
Linus Torvalds
|
c48b75b727 |
sound updates for 5.10
The amount of changes is smaller at this round (what a surprise),
but lots of activity is seen. Most of changes are about ASoC
driver development, especially Intel platforms.
Here are some highlights:
General:
* Replace all tasklet usages with other alternatives
* Cleanup of the ASoC error unwinding code
* Fixes for trivial issues caught by static checker
* Spell fixes allover the places
ALSA Core:
* Lockdep fix for control devices
* Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
* SoundBlaster AE-7 support
* Changes in quirk table for the rename handling
* Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
* Lots of updates for Intel SOF and SoundWire enablement
* Replacement of the DSP driver for some older x86 systems;
the new code was written from scratch, better maintenance
expected
* Helpers for parsing auxiluary devices from the device tree
* New support for AllWinner A64, Cirrus Logic CS4234, Mediatek
MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P,
and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764
-----BEGIN PGP SIGNATURE-----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=nWAp
-----END PGP SIGNATURE-----
Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The amount of changes is smaller at this round (what a surprise), but
lots of activity is seen. Most of changes are about ASoC driver
development, especially Intel platforms. Here are some highlights:
General:
- Replace all tasklet usages with other alternatives
- Cleanup of the ASoC error unwinding code
- Fixes for trivial issues caught by static checker
- Spell fixes allover the places
ALSA Core:
- Lockdep fix for control devices
- Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
- SoundBlaster AE-7 support
- Changes in quirk table for the rename handling
- Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
- Lots of updates for Intel SOF and SoundWire enablement
- Replacement of the DSP driver for some older x86 systems; the new
code was written from scratch, better maintenance expected
- Helpers for parsing auxiluary devices from the device tree
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764"
* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
ALSA: hda: fix jack detection with Realtek codecs when in D3
ALSA: fireworks: use semicolons rather than commas to separate statements
ALSA: hda: use semicolons rather than commas to separate statements
ALSA: hda/i915 - fix list corruption with concurrent probes
ASoC: dmaengine: Document support for TX only or RX only streams
ASoC: mchp-spdiftx: remove 'TX' from playback stream name
ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
ASoC: tas2764: Add the driver for the TAS2764
dt-bindings: tas2764: Add the TAS2764 binding doc
ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
ASoC: stm32: dfsdm: add actual resolution trace
ASoC: stm32: dfsdm: change rate limits
ASoC: qcom: sc7180: Add support for audio over DP
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass:Update lpaif_dmactl members order
Asoc:qcom:lpass-cpu:Update dts property read API
ASoC: dt-bindings: Add dt binding for lpass hdmi
...
|
||
|
Linus Torvalds
|
93b694d096 |
drm next for 5.10-rc1
New driver:
Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config
-----BEGIN PGP SIGNATURE-----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=4H8J
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
|
||
|
Linus Torvalds
|
726eb70e0d |
Char/Misc driver patches for 5.10-rc1
Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A /bTQ42c/WRQ+LU828GSM =6sO2 -----END PGP SIGNATURE----- Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ... |
||
|
Linus Torvalds
|
c6dbef7307 |
USB/PHY/Thunderbolt driver patches for 5.10-rc1
Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get
wrong, as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception of
the last "obviously correct" patch that updated a FALLTHROUGH comment
that got merged last weekend.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4hAAg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfRACcCp48StLg4V7XcZ41eQYES/DVwxkAnjnZs+La
Y7F+o2p8DiuLLQamdEyB
=lHr1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
|
||
|
Linus Torvalds
|
ade7afe3e6 |
Staging / IIO driver updates for 5.10-rc1
Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no new drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g+oQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymAyQCghI58tN/Np3itPlZuc+HYFN7OHH8An1TKzCm1 bwkfw5qAcHab+R7KQZOA =BaXS -----END PGP SIGNATURE----- Merge tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no staging drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits) staging: comedi: check validity of wMaxPacketSize of usb endpoints found staging: wfx: improve robustness of wfx_get_hw_rate() staging: wfx: drop unicode characters from strings staging: wfx: gpiod_get_value() can return an error staging: wfx: increase robustness of hif_generic_confirm() staging: wfx: wfx_init_common() returns NULL on error staging: wfx: standardize the error when vif does not exist staging: wfx: check memory allocation staging: wfx: improve error handling of hif_join() staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c staging: rtl8188eu: Fix long lines dt-bindings: staging: wfx: silabs,wfx yaml conversion staging: wfx: update copyrights dates staging: wfx: fix QoS priority for slow buses staging: wfx: fix BA sessions for older firmwares staging: wfx: remove remaining code of 'secure link' feature staging: wfx: fix handling of MMIC error staging: vchiq: Fix list_for_each exit tests staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t ... |
||
|
Mauro Carvalho Chehab
|
480017f00c |
dt-bindings: fix references to files converted to yaml
There were several files converted to yaml, but the .txt file is still referenced somewhere else. Update the references for them to point to the right file. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Linus Torvalds
|
5d6c413c92 |
TTY/Serial patches for 5.10-rc1
Here is the big set of tty and serial driver patches for 5.10-rc1. Lots of little things in here, including: - tasklet_setup api conversions - sysrq support for capital letters - vt and vc cleanups and unwinding the mess some more - serial driver updates and minor tweaks - new device ids - rs485 support for some drivers - serial binding documentation updates - lots of small serial driver changes for reported issues All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c5vA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykVRACfWQRqsz/IIs6MZsDY9dkj4+QVUWAAn0mN2uHR mBox8w4TdTfG96jFXSfF =WYKP -----END PGP SIGNATURE----- Merge tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.10-rc1. Lots of little things in here, including: - tasklet_setup api conversions - sysrq support for capital letters - vt and vc cleanups and unwinding the mess some more - serial driver updates and minor tweaks - new device ids - rs485 support for some drivers - serial binding documentation updates - lots of small serial driver changes for reported issues All have been in linux-next for a while with no reported issues" * tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) serial: mcf: add sysrq capability serial: fsl_lpuart: add sysrq support when using dma fbcon: remove no-op fbcon_set_origin() tty/sysrq: Extend the sysrq_key_table to cover capital letters serial: max310x: rework RX interrupt handling serial: 8250_dw: Fix clk-notifier/port suspend deadlock serial: 8250: Skip uninitialized TTY port baud rate update serial: 8250: Discard RTS/DTS setting from clock update method tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm serial: 8250_fsl: Fix TX interrupt handling condition serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt tty: serial: fsl_lpuart: fix lpuart32_poll_get_char tty: serial: lpuart: fix lpuart32_write usage serial: qcom_geni_serial: To correct QUP Version detection logic serial: mvebu-uart: fix unused variable warning vt_ioctl: make VT_RESIZEX behave like VT_RESIZE serial: mvebu-uart: simplify the return expression of mvebu_uart_probe() tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n pch_uart: drop double zeroing ... |
||
|
Linus Torvalds
|
6448cbf662 |
- New Drivers
- Add support for KTD253
- Fix-ups
- Add Device Tree documentation; common, kinetic,ktd253
- Use correct header(s); tosa_lcd, tosa_bl
- Bug Fixes
- Fix refcount imbalance; sky81452-backlight
-----BEGIN PGP SIGNATURE-----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=GZ+j
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for KTD253
Fix-ups:
- Add Device Tree documentation; common, kinetic,ktd253
- Use correct header(s); tosa_lcd, tosa_bl
Bug Fixes:
- Fix refcount imbalance; sky81452-backlight"
* tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: tosa_bl: Include the right header
backlight: tosa_lcd: Include the right header
backlight: Add Kinetic KTD253 backlight driver
dt-bindings: backlight: Add Kinetic KTD253 bindings
dt-bindings: backlight: Add some common backlight properties
backlight: sky81452-backlight: Fix refcount imbalance on error
|
||
|
Linus Torvalds
|
1a31c12371 |
- New Drivers
- Add support for initialising shared (between children) Regmaps
- Add support for Kontron SL28CPLD
- Add support for ENE KB3930 Embedded Controller
- Add support for Intel FPGA PAC MAX 10 BMC
- New Device Support
- Add support for Power to Ricoh RN5T618
- Add support for UART to Intel Lakefield
- Add support for LP87524_Q1 to Texas Instruments LP87565
- New Functionality
- Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
- Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
- Use new GPIOD API; dm355evm_msp
- Add wake-up capability; sprd-sc27xx-spi
- Add ACPI support; kempld-core
- Fix-ups
- Trivial (spelling/whitespace); Kconfig, ab8500
- Fix for unused variables; khadas-mcu, kempld-core
- Remove unused header file(s); mt6360-core
- Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
- Add COMPILE_TEST support; asic3, tmio_core
- Add dependency on I2C; SL28CPLD
- Bug Fixes
- Fix memory leak(s); sm501
- Do not free regmap_config's 'name' until exit; syscon
-----BEGIN PGP SIGNATURE-----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=1wSH
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for initialising shared (between children) Regmaps
- Add support for Kontron SL28CPLD
- Add support for ENE KB3930 Embedded Controller
- Add support for Intel FPGA PAC MAX 10 BMC
New Device Support:
- Add support for Power to Ricoh RN5T618
- Add support for UART to Intel Lakefield
- Add support for LP87524_Q1 to Texas Instruments LP87565
New Functionality:
- Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
- Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
- Use new GPIOD API; dm355evm_msp
- Add wake-up capability; sprd-sc27xx-spi
- Add ACPI support; kempld-core
Fix-ups:
- Trivial (spelling/whitespace); Kconfig, ab8500
- Fix for unused variables; khadas-mcu, kempld-core
- Remove unused header file(s); mt6360-core
- Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
- Add COMPILE_TEST support; asic3, tmio_core
- Add dependency on I2C; SL28CPLD
Bug Fixes:
- Fix memory leak(s); sm501
- Do not free regmap_config's 'name' until exit; syscon"
* tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits)
mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI
mfd: sl28cpld: Depend on I2C
mfd: asic3: Build if COMPILE_TEST=y
dt-bindings: mfd: Correct interrupt flags in examples
mfd: Add ACPI support to Kontron PLD driver
mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC
mfd: lp87565: Add LP87524-Q1 variant
dt-bindings: mfd: Add LP87524-Q1
dt-bindings: mfd: lp87565: Convert to yaml
mfd: mt6360: Remove unused include <linux/version.h>
mfd: sm501: Fix leaks in probe()
mfd: syscon: Don't free allocated name for regmap_config
dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles
dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings
dt-bindings: mfd: ab8500: Remove weird Unicode characters
mfd: sprd: Add wakeup capability for PMIC IRQ
mfd: intel-lpss: Add device IDs for UART ports for Lakefield
mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
mfd: wcd934x: Simplify with dev_err_probe()
mfd: stmfx: Simplify with dev_err_probe()
...
|