When update the latest upstream gcc and binutils, it generates more
objtool warnings on LoongArch, like this:
init/main.o: warning: objtool: unexpected relocation symbol type in .rela.discard.unreachable
We can see that the reloc sym name is local label instead of section in
relocation section '.rela.discard.unreachable', in this case, the reloc
sym type is STT_NOTYPE instead of STT_SECTION.
As suggested by Peter Zijlstra, we add a "local_label" member in struct
symbol, then set it as true if symbol type is STT_NOTYPE and symbol name
starts with ".L" string in classify_symbols().
Let's check reloc->sym->local_label to not return -1 in add_dead_ends(),
and also use reloc->sym->offset instead of reloc addend which is 0 to
find the corresponding instruction. At the same time, let's replace the
variable "addend" with "offset" to reflect the reality.
Here are some detailed info:
[fedora@linux 6.8.test]$ gcc --version
gcc (GCC) 14.0.1 20240129 (experimental)
[fedora@linux 6.8.test]$ as --version
GNU assembler (GNU Binutils) 2.42.50.20240129
[fedora@linux 6.8.test]$ readelf -r init/main.o | grep -A 2 "rela.discard.unreachable"
Relocation section '.rela.discard.unreachable' at offset 0x6028 contains 1 entry:
Offset Info Type Sym. Value Sym. Name + Addend
000000000000 00d900000063 R_LARCH_32_PCREL 00000000000002c4 .L500^B1 + 0
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement arch-specific init_orc_entry(), write_orc_entry(), reg_name(),
orc_type_name(), print_reg() and orc_print_dump(), then set BUILD_ORC as
y to build the orc related files.
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Move init_orc_entry(), write_orc_entry(), reg_name(), orc_type_name()
and print_reg() from generic orc_gen.c and orc_dump.c to arch-specific
orc.c, then introduce a new function orc_print_dump() to print info.
This is preparation for later patch, no functionality change.
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Only copy the minimal definitions of instruction opcodes and formats
in inst.h from arch/loongarch to tools/arch/loongarch, and also copy
the definition of sign_extend64() to tools/include/linux/bitops.h to
decode the following kinds of instructions:
(1) stack pointer related instructions
addi.d, ld.d, st.d, ldptr.d and stptr.d
(2) branch and jump related instructions
beq, bne, blt, bge, bltu, bgeu, beqz, bnez, bceqz, bcnez, b, bl and jirl
(3) other instructions
break, nop and ertn
See more info about instructions in LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add the minimal changes to enable objtool build on LoongArch,
most of the functions are stubs to only fix the build errors
when make -C tools/objtool.
This is similar with commit e52ec98c5a ("objtool/powerpc:
Enable objtool to be built on ppc").
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----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=x6+F
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.9' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.9:
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM
-----BEGIN PGP SIGNATURE-----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=cWpl
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.9-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.9
- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
- Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZepBjgAKCRCivnWIJHzd
FnngAP93VxjCkJ+5qSmYpFNG6r0ECVIbLHFQ59nKn0+GgvbPEgEAwt8svdLdW06h
njFTpdzvl4Po+aD/V9xHgqVz3kVvZwE=
=1FbW
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.9
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
- Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
1. Set reserved bits as zero in CPUCFG.
2. Start SW timer only when vcpu is blocking.
3. Do not restart SW timer when it is expired.
4. Remove unnecessary CSR register saving during enter guest.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmXoeWIWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImehb3D/9C5IrdyU/2f3fEUuuXO0a2ZS1p
l2OT+yr7C6/jATokGcd+53CF8MzYawzuAT3tSXYyoqAxRu0HUkvuS1oA/eFM4EwV
iIoUC3jnqcsQ5LCPt6yt+Tzgug64Xm5F4btYWIpmXgCJWx/VVG6+z3JarXAfA2it
vgVMGgrrfHt68sEsenNFNgiJ5tCCubjR7XFwjM8rsL7AzUDdmXpF7gFyH2Ufgosi
a5CxcPPauO1y5ZCGU4JU9QvxnVqW1kt/TRZIGqqGfULtlBSoZbD9zP3OcCQkL+ai
SPNxvU5I+BeX6honpmO6aR/F1EphQhRji3ZKxI8UBo4aJD5+FtMG/YOEPI+ZAS0/
JPuWpDqJH46SN3jfKTQay8jXc+mcnOYXJ9Yrixd4UCf66WJit/+BOma/wP638u2j
RUzm1kqhNGad6QiDDtSjISM6sg6FozAGc/KhCkWAhV+lHLnfkXtaf3S+GIu5OiWz
ETCKlmIGiy0y774+iftlD7RDRGmtrC4cx5ibl7cKKi62Y5vgujCdDofAyYC+D5cW
puaIuHOx1hWtPRT9p1WfUL310ED+Qj3N2pDDcJcqdCIiRRZ5l/hxGS7V687a30WV
GcegEqh19CjI9KDat4E1ld4jUHJxaFrw3pr2z3SP7cW3IgdngPJL57M0M2jSazaQ
479xZPJ/i4xhJaKACg==
=8HOW
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.9
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
Running the page-pool sample on production machines under moderate
networking load shows recycling rate higher than 100%:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.3% (alloc: 1392:2290247724 recycle: 469289484:1828235386)
Note that outstanding refs (89088) == slow alloc * cache size (1392 * 64)
which means this machine is recycling page pool pages perfectly, not
a single page has been released.
The extra 0.3% is because sample ignores allocations from the ptr_ring.
Treat those the same as alloc_fast, the ring vs cache alloc is
already captured accurately enough by recycling stats.
With the fix:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.0% (alloc: 1392:2331141604 recycle: 473625579:1857460661)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not writable
from userspace, so there would be no way to write to a read-only
guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an atomic access.
- Check for mmu_notifier invalidation events before faulting in the pfn,
and before acquiring mmu_lock, to avoid unnecessary work and lock
contention with preemptible kernels (including CONFIG_PREEMPT_DYNAMIC
in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will be
re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region() before
dropping kvm->lock, to avoid a race with unregistering of the same region
and the consequent use-after-free issue.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmXskdYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN1TAf/SUGf4QuYG7nnfgWDR+goFO6Gx7NE
pJr3kAwv6d2f+qTlURfGjnX929pgZDLgoTkXTNeZquN6LjgownxMjBIpymVobvAD
AKvqJS/ECpryuehXbeqlxJxJn+TrxJ5r4QeNILMHc3AOZoiUqM6xl3zFfXWDNWVo
IazwT8P3d8wxiHAxv1eG6OVWHxbcg31068FVKRX3f/bWPbVwROJrPkCopmz2BJvU
6KYdYcn2rkpDTEM3ouDC/6gxJ9vpSY3+nW7Q7dNtGtOH2+BddfSA6I0rphCQWCNs
uXOxd5bDrC+KmkiULTPostuvwBgIm1k9wC2kW9A4P2VEf6Ay+ZHEdAOBJQ==
=+MT/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
exported abs_srctree and abs_objtree to avoid recomputation after the
sub-make. However, this approach turned out to be fragile.
Commit 5fa94ceb79 ("kbuild: set correct abs_srctree and abs_objtree
for package builds") moved them above "ifneq ($(sub_make_done),1)",
eliminating the need for exporting them.
These are only needed in the top Makefile. If an absolute path is
required in sub-directories, you can use $(abspath ) or $(realpath )
as needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
-----BEGIN PGP SIGNATURE-----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=M0td
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-guest_memfd_fixes-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
Rx alloc failures are commonly counted by drivers.
Support reporting those via netdev-genl queue stats.
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'make_connection' is launched twice: once for IPv4, once for IPv6.
But then, the "pm_nl_ctl events" was launched a first time, killed, then
relaunched after for no particular reason.
We can then move this code, and the generation of the temp file to
exchange, to the init part, and remove extra conditions that no longer
needed.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-12-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2004: $/${} is unnecessary on arithmetic variables.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-11-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2154: optstring is referenced but not assigned.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-10-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
- SC2145: Argument mixes string and array. Use * or separate argument.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-9-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2181: Check exit code directly with e.g. 'if mycmd;', not
indirectly with $?.
- SC2004: $/${} is unnecessary on arithmetic variables.
- SC2155: Declare and assign separately to avoid masking return
values.
- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
- SC2059: Don't use variables in the printf format string. Use printf
'..%s..' "$foo".
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-8-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2046: Quote '$(get_msk_inuse)' to prevent word splitting.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-7-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add and
use helpers defined in mptcp_lib.sh.
This patch unifies "pm_nl_ctl events" related code in userspace_pm.sh
and mptcp_join.sh into a helper mptcp_lib_events(). Define it in
mptcp_lib.sh and use it in both scripts.
Note that mptcp_lib_kill_wait is now call before starting 'events' for
mptcp_join.sh as well, but that's fine: each test is started from a new
netns, so there will not be any existing pid there, and nothing is done
when mptcp_lib_kill_wait is called with 0.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-6-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set more the default sysctl values in mptcp_lib_ns_init(). It is fine to
do that everywhere, because they could be overridden latter if needed.
mptcp_lib_ns_exit() now also try to remove temp netns files used for the
stats even for selftests not using them. That's fine to do that because
these files have a unique name.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-5-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers mptcp_lib_ns_init() and mptcp_lib_ns_exit() in mptcp_lib.sh
to initialize and delete the given namespaces. Then every test script
can invoke these helpers and use all namespaces.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-4-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds local variables rndh in do_transfer() functions both in
mptcp_connect.sh and simult_flows.sh, setting it with ${ns1:4}, not the
global variable rndh. The global one is hidden in the next commit.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-3-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch exports check_tools() helper from mptcp_join.sh into
mptcp_lib.sh as a public one mptcp_lib_check_tools(). The arguments
"ip", "ss", "iptables" and "ip6tables" are passed into this helper
to indicate whether to check ip tool, ss tool, iptables and ip6tables
tools.
This helper can be used in every scripts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-2-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0c4cd3f86a ("selftests: mptcp: join: use 'iptables-legacy' if
available") and commit a5a5990c09 ("selftests: mptcp: sockopt: use
'iptables-legacy' if available") forced using iptables-legacy if
available.
This was needed because of some issues that were visible when testing
the kselftests on a v5.15.x with iptables-nft as default backend. It
looks like these errors are no longer present. As mentioned by Pablo [1],
the errors were maybe due to missing kernel config. We can then use
iptables-nft if it is the default one, instead of using a legacy tool.
We can then check the variables iptables and ip6tables are valid. We can
keep the variables to easily change it later or add options.
Link: https://lore.kernel.org/netdev/ZbFiixyMFpQnxzCH@calendula/ [1]
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-1-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_gc fails occasionally. According to the study, fib6_run_gc() using
jiffies_round() to round the GC interval could increase the waiting time up
to 750ms (3/4 seconds). The timer has a granularity of 512ms at the range
4s to 32s. That means a route with an expiration time E seconds can wait
for more than E * 2 + 1 seconds if the GC interval is also E seconds.
E * 2 + 2 seconds should be enough for waiting for removing routes.
Also remove a check immediately after replacing 5 routes since it is very
likely to remove some of routes before completing the last route with a
slow environment.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240305183949.258473-1-thinker.li@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nlctrl genetlink-legacy family uses nest-type-value encoding as
described in Documentation/userspace-api/netlink/genetlink-legacy.rst
Add nest-type-value decoding to ynl.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl-gen-c generates e.g. 'calloc(mcast_groups, sizeof(*dst->mcast_groups))'
for array-nest attrs when it should be 'n_mcast_groups'.
Add a 'n_' prefix in the generated code for array-nests.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl does not handle NlError exceptions so they get reported like program
failures. Handle the NlError exceptions and report the netlink errors
more cleanly.
Example now:
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}
Example before:
Traceback (most recent call last):
File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 81, in <module>
main()
File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 69, in main
reply = ynl.dump(args.dump, attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 906, in dump
return self._op(method, vals, [], dump=True)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 872, in _op
raise NlError(nl_msg)
lib.ynl.NlError: Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extack decoding was using a hard-coded msg header size of 20 but
netlink-raw has a header size of 16.
Use a protocol specific msghdr_size() when decoding the attr offssets.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not restricted to working with "internal" maps, it cares about any
map that can be mmap'ed. Reflect that in more succinct and generic name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20240307031228.42896-6-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
__uint() macro that is used to specify map attributes like:
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(map_flags, BPF_F_MMAPABLE);
It is limited to 32-bit, since BTF_KIND_ARRAY has u32 "number of elements"
field in "struct btf_array".
Introduce __ulong() macro that allows specifying values bigger than 32-bit.
In map definition "map_extra" is the only u64 field, so far.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-5-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This cpupower update for Linux 6.9-rc1 consists of a single fix
to a typo in cpupower-frequency-info.1 man page.
-----BEGIN PGP SIGNATURE-----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=oaz3
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge a cpupower utility documentation update for 6.9-rc1 from Shuah Khan:
"This cpupower update for Linux 6.9-rc1 consists of a single fix
to a typo in cpupower-frequency-info.1 man page."
* tag 'linux-cpupower-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
Fix cpupower-frequency-info.1 man page typo
* arm64/for-next/perf: (39 commits)
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
drivers/perf: hisi_pcie: Merge find_related_event() and get_event_idx()
drivers/perf: hisi_pcie: Relax the check on related events
drivers/perf: hisi_pcie: Check the target filter properly
drivers/perf: hisi_pcie: Add more events for counting TLP bandwidth
drivers/perf: hisi_pcie: Fix incorrect counting under metric mode
drivers/perf: hisi_pcie: Introduce hisi_pcie_pmu_get_event_ctrl_val()
drivers/perf: hisi_pcie: Rename hisi_pcie_pmu_{config,clear}_filter()
drivers/perf: hisi: Enable HiSilicon Erratum 162700402 quirk for HIP09
perf/arm_cspmu: Add devicetree support
dt-bindings/perf: Add Arm CoreSight PMU
perf/arm_cspmu: Simplify counter reset
perf/arm_cspmu: Simplify attribute groups
perf/arm_cspmu: Simplify initialisation
...
* for-next/reorg-va-space:
: Reorganise the arm64 kernel VA space in preparation for LPA2 support
: (52-bit VA/PA).
arm64: kaslr: Adjust randomization range dynamically
arm64: mm: Reclaim unused vmemmap region for vmalloc use
arm64: vmemmap: Avoid base2 order of struct page size to dimension region
arm64: ptdump: Discover start of vmemmap region at runtime
arm64: ptdump: Allow all region boundaries to be defined at boot time
arm64: mm: Move fixmap region above vmemmap region
arm64: mm: Move PCI I/O emulation region above the vmemmap region
* for-next/rust-for-arm64:
: Enable Rust support for arm64
arm64: rust: Enable Rust support for AArch64
rust: Refactor the build target to allow the use of builtin targets
* for-next/misc:
: Miscellaneous arm64 patches
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
arm64: Remove enable_daif macro
arm64/hw_breakpoint: Directly use ESR_ELx_WNR for an watchpoint exception
arm64: cpufeatures: Clean up temporary variable to simplify code
arm64: Update setup_arch() comment on interrupt masking
arm64: remove unnecessary ifdefs around is_compat_task()
arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang
arm64/sme: Ensure that all fields in SMCR_EL1 are set to known values
arm64/sve: Ensure that all fields in ZCR_EL1 are set to known values
arm64/sve: Document that __SVE_VQ_MAX is much larger than needed
arm64: make member of struct pt_regs and it's offset macro in the same order
arm64: remove unneeded BUILD_BUG_ON assertion
arm64: kretprobes: acquire the regs via a BRK exception
arm64: io: permit offset addressing
arm64: errata: Don't enable workarounds for "rare" errata by default
* for-next/daif-cleanup:
: Clean up DAIF handling for EL0 returns
arm64: Unmask Debug + SError in do_notify_resume()
arm64: Move do_notify_resume() to entry-common.c
arm64: Simplify do_notify_resume() DAIF masking
* for-next/kselftest:
: Miscellaneous arm64 kselftest patches
kselftest/arm64: Test that ptrace takes effect in the target process
* for-next/documentation:
: arm64 documentation patches
arm64/sme: Remove spurious 'is' in SME documentation
arm64/fp: Clarify effect of setting an unsupported system VL
arm64/sme: Fix cut'n'paste in ABI document
arm64/sve: Remove bitrotted comment about syscall behaviour
* for-next/sysreg:
: sysreg updates
arm64/sysreg: Update ID_AA64DFR0_EL1 register
arm64/sysreg: Update ID_DFR0_EL1 register fields
arm64/sysreg: Add register fields for ID_AA64DFR1_EL1
* for-next/dpisa:
: Support for 2023 dpISA extensions
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
Donald points out that we don't check for overflows.
Stash the length of the message on nlmsg_pid (nlmsg_seq would
do as well). This allows the attribute helpers to remain
self-contained (no extra arguments). Also let the put
helpers continue to return nothing. The error is checked
only in (newly introduced) ynl_msg_end().
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240305185000.964773-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No solution yet for the stmmac issue mentioned in the last PR,
but it proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when pruning
states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0bH0
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
Always run fixture setup in the grandchild process, and by default also
run the teardown in the same process. However, this change makes it
possible to run the teardown in a parent process when
_metadata->teardown_parent is set to true (e.g. in fixture setup).
Fix TEST_SIGNAL() by forwarding grandchild's signal to its parent. Fix
seccomp tests by running the test setup in the parent of the test
thread, as expected by the related test code. Fix Landlock tests by
waiting for the grandchild before processing _metadata.
Use of exit(3) in tests should be OK because the environment in which
the vfork(2) call happen is already dedicated to the running test (with
flushed stdio, setpgrp() call), see __run_test() and the call to fork(2)
just before running the setup/test/teardown. Even if the test
configures its own exit handlers, they will not be run by the parent
because it never calls exit(3), and the test function either ends with a
call to _exit(2) or a signal.
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Fixes: 0710a1a73f ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240305201029.1331333-1-mic@digikod.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not used anymore and the code is coverted to use a hash map. Now
sym_hist has a static size, so no need to have sizeof_sym_hist in the
struct annotated_source.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-4-namhyung@kernel.org
Use annotated_source.samples hashmap instead of addr array in the
struct sym_hist.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-3-namhyung@kernel.org
Now symbol histogram uses an array to save per-offset sample counts.
But it wastes a lot of memory if the symbol has a few samples only.
Add a hashmap to save values only for actual samples.
For now, it has duplicate histogram (one in the existing array and
another in the new hash map). Once it can convert to use the hash
in all places, we can get rid of the array later.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-2-namhyung@kernel.org
Two test cases to verify that '?' and other printable characters are
allowed in BTF DATASEC names:
- DATASEC with name "?.foo bar:buz" should be accepted;
- type with name "?foo" should be rejected.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-16-eddyz87@gmail.com
Optional struct_ops maps are defined using question mark at the start
of the section name, e.g.:
SEC("?.struct_ops")
struct test_ops optional_map = { ... };
This commit teaches libbpf to detect if kernel allows '?' prefix
in datasec names, and if it doesn't then to rewrite such names
by replacing '?' with '_', e.g.:
DATASEC ?.struct_ops -> DATASEC _.struct_ops
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-13-eddyz87@gmail.com
Allow using two new section names for struct_ops maps:
- SEC("?.struct_ops")
- SEC("?.struct_ops.link")
To specify maps that have bpf_map->autocreate == false after open.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-12-eddyz87@gmail.com
The next patch would add two new section names for struct_ops maps.
To make working with multiple struct_ops sections more convenient:
- remove fields like elf_state->st_ops_{shndx,link_shndx};
- mark section descriptions hosting struct_ops as
elf_sec_desc->sec_type == SEC_ST_OPS;
After these changes struct_ops sections could be processed uniformly
by iterating bpf_object->efile.secs entries.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-11-eddyz87@gmail.com
Check that autocreate flags of struct_ops map cause autoload of
struct_ops corresponding programs:
- when struct_ops program is referenced only from a map for which
autocreate is set to false, that program should not be loaded;
- when struct_ops program with autoload == false is set to be used
from a map with autocreate == true using shadow var,
that program should be loaded;
- when struct_ops program is not referenced from any map object load
should fail.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-10-eddyz87@gmail.com
Automatically select which struct_ops programs to load depending on
which struct_ops maps are selected for automatic creation.
E.g. for the BPF code below:
SEC("struct_ops/test_1") int BPF_PROG(foo) { ... }
SEC("struct_ops/test_2") int BPF_PROG(bar) { ... }
SEC(".struct_ops.link")
struct test_ops___v1 A = {
.foo = (void *)foo
};
SEC(".struct_ops.link")
struct test_ops___v2 B = {
.foo = (void *)foo,
.bar = (void *)bar,
};
And the following libbpf API calls:
bpf_map__set_autocreate(skel->maps.A, true);
bpf_map__set_autocreate(skel->maps.B, false);
The autoload would be enabled for program 'foo' and disabled for
program 'bar'.
During load, for each struct_ops program P, referenced from some
struct_ops map M:
- set P.autoload = true if M.autocreate is true for some M;
- set P.autoload = false if M.autocreate is false for all M;
- don't change P.autoload, if P is not referenced from any map.
Do this after bpf_object__init_kern_struct_ops_maps()
to make sure that shadow vars assignment is done.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-9-eddyz87@gmail.com
Check that bpf_map__set_autocreate() can be used to disable automatic
creation for struct_ops maps.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-8-eddyz87@gmail.com
When loading struct_ops programs kernel requires BTF id of the
struct_ops type and member index for attachment point inside that
type. This makes impossible to use same BPF program in several
struct_ops maps that have different struct_ops type.
Check if libbpf rejects such BPF objects files.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-7-eddyz87@gmail.com
Several test_progs tests already capture libbpf log in order to check
for some expected output, e.g bpf_tcp_ca.c, kfunc_dynptr_param.c,
log_buf.c and a few others.
This commit provides a, hopefully, simple API to capture libbpf log
w/o necessity to define new print callback in each test:
/* Creates a global memstream capturing INFO and WARN level output
* passed to libbpf_print_fn.
* Returns 0 on success, negative value on failure.
* On failure the description is printed using PRINT_FAIL and
* current test case is marked as fail.
*/
int start_libbpf_log_capture(void)
/* Destroys global memstream created by start_libbpf_log_capture().
* Returns a pointer to captured data which has to be freed.
* Returned buffer is null terminated.
*/
char *stop_libbpf_log_capture(void)
The intended usage is as follows:
if (start_libbpf_log_capture())
return;
use_libbpf();
char *log = stop_libbpf_log_capture();
ASSERT_HAS_SUBSTR(log, "... expected ...", "expected some message");
free(log);
As a safety measure, free(start_libbpf_log_capture()) is invoked in the
epilogue of the test_progs.c:run_one_test().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-6-eddyz87@gmail.com
Extend struct_ops_module test case to check if it is possible to use
'___' suffixes for struct_ops type specification.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20240306104529.6453-5-eddyz87@gmail.com
Skip load steps for struct_ops maps not marked for automatic creation.
This should allow to load bpf object in situations like below:
SEC("struct_ops/foo") int BPF_PROG(foo) { ... }
SEC("struct_ops/bar") int BPF_PROG(bar) { ... }
struct test_ops___v1 {
int (*foo)(void);
};
struct test_ops___v2 {
int (*foo)(void);
int (*does_not_exist)(void);
};
SEC(".struct_ops.link")
struct test_ops___v1 map_for_old = {
.test_1 = (void *)foo
};
SEC(".struct_ops.link")
struct test_ops___v2 map_for_new = {
.test_1 = (void *)foo,
.does_not_exist = (void *)bar
};
Suppose program is loaded on old kernel that does not have definition
for 'does_not_exist' struct_ops member. After this commit it would be
possible to load such object file after the following tweaks:
bpf_program__set_autoload(skel->progs.bar, false);
bpf_map__set_autocreate(skel->maps.map_for_new, false);
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20240306104529.6453-4-eddyz87@gmail.com
Enforce the following existing limitation on struct_ops programs based
on kernel BTF id instead of program-local BTF id:
struct_ops BPF prog can be re-used between multiple .struct_ops &
.struct_ops.link as long as it's the same struct_ops struct
definition and the same function pointer field
This allows reusing same BPF program for versioned struct_ops map
definitions, e.g.:
SEC("struct_ops/test")
int BPF_PROG(foo) { ... }
struct some_ops___v1 { int (*test)(void); };
struct some_ops___v2 { int (*test)(void); };
SEC(".struct_ops.link") struct some_ops___v1 a = { .test = foo }
SEC(".struct_ops.link") struct some_ops___v2 b = { .test = foo }
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-3-eddyz87@gmail.com
E.g. allow the following struct_ops definitions:
struct bpf_testmod_ops___v1 { int (*test)(void); };
struct bpf_testmod_ops___v2 { int (*test)(void); };
SEC(".struct_ops.link")
struct bpf_testmod_ops___v1 a = { .test = ... }
SEC(".struct_ops.link")
struct bpf_testmod_ops___v2 b = { .test = ... }
Where both bpf_testmod_ops__v1 and bpf_testmod_ops__v2 would be
resolved as 'struct bpf_testmod_ops' from kernel BTF.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-2-eddyz87@gmail.com
Use may_goto instruction to implement cond_break macro.
Ideally the macro should be written as:
asm volatile goto(".byte 0xe5;
.byte 0;
.short %l[l_break] ...
.long 0;
but LLVM doesn't recognize fixup of 2 byte PC relative yet.
Hence use
asm volatile goto(".byte 0xe5;
.byte 0;
.long %l[l_break] ...
.short 0;
that produces correct asm on little endian.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-4-alexei.starovoitov@gmail.com
Introduce may_goto instruction that from the verifier pov is similar to
open coded iterators bpf_for()/bpf_repeat() and bpf_loop() helper, but it
doesn't iterate any objects.
In assembly 'may_goto' is a nop most of the time until bpf runtime has to
terminate the program for whatever reason. In the current implementation
may_goto has a hidden counter, but other mechanisms can be used.
For programs written in C the later patch introduces 'cond_break' macro
that combines 'may_goto' with 'break' statement and has similar semantics:
cond_break is a nop until bpf runtime has to break out of this loop.
It can be used in any normal "for" or "while" loop, like
for (i = zero; i < cnt; cond_break, i++) {
The verifier recognizes that may_goto is used in the program, reserves
additional 8 bytes of stack, initializes them in subprog prologue, and
replaces may_goto instruction with:
aux_reg = *(u64 *)(fp - 40)
if aux_reg == 0 goto pc+off
aux_reg -= 1
*(u64 *)(fp - 40) = aux_reg
may_goto instruction can be used by LLVM to implement __builtin_memcpy,
__builtin_strcmp.
may_goto is not a full substitute for bpf_for() macro.
bpf_for() doesn't have induction variable that verifiers sees,
so 'i' in bpf_for(i, 0, 100) is seen as imprecise and bounded.
But when the code is written as:
for (i = 0; i < 100; cond_break, i++)
the verifier see 'i' as precise constant zero,
hence cond_break (aka may_goto) doesn't help to converge the loop.
A static or global variable can be used as a workaround:
static int zero = 0;
for (i = zero; i < 100; cond_break, i++) // works!
may_goto works well with arena pointers that don't need to be bounds
checked on access. Load/store from arena returns imprecise unbounded
scalar and loops with may_goto pass the verifier.
Reserve new opcode BPF_JMP | BPF_JCOND for may_goto insn.
JCOND stands for conditional pseudo jump.
Since goto_or_nop insn was proposed, it may use the same opcode.
may_goto vs goto_or_nop can be distinguished by src_reg:
code = BPF_JMP | BPF_JCOND
src_reg = 0 - may_goto
src_reg = 1 - goto_or_nop
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-2-alexei.starovoitov@gmail.com
KVM_FEATURE_PV_UNHALT is expected to get cleared from KVM PV feature CPUID
data when KVM_X86_DISABLE_EXITS_HLT is enabled. Add the corresponding test
to kvm_pv_test.
Note, the newly added code doesn't actually test KVM_FEATURE_PV_UNHALT and
KVM_X86_DISABLE_EXITS_HLT features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240228101837.93642-4-vkuznets@redhat.com
[sean: add and use vcpu_cpuid_has()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
cpupower-frequency-info.1 man page type is incorrect for
related-cpus. Fix it.
utils/cpufreq-info.c
{"related-cpus", no_argument, NULL, 'r'},
{"affected-cpus", no_argument, NULL, 'a'},
Fixed changelog before applying:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jan Kratochvil <jan@jankratochvil.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Support accessing $argN in the return probe events. This will help users to
record entry data in function return (exit) event for simplfing the function
entry/exit information in one event, and record the result values (e.g.
allocated object/initialized object) at function exit.
For example, if we have a function `int init_foo(struct foo *obj, int param)`
sometimes we want to check how `obj` is initialized. In such case, we can
define a new return event like below;
# echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events
Thus it records the function parameter `param` and its result `obj->field1`
(the dereference will be done in the function exit timing) value at once.
This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF
is enabled, we can trace both function parameters and the return value
by following command.
# echo 'f target_function%return $arg* $retval' >> dynamic_events
Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The KVM RISC-V allows Zacas extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows Ztso extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a KVM selftests to validate the Sstc timer functionality.
The test was ported from arm64 arch timer test.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().
The code is inspired from that of x86/arm64.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Most "production" netlink clients use large buffers to
make dump efficient, which means that handling of dump
continuation in the kernel is not very well tested.
Add an option for debugging / testing handling of dumps.
It enables printing of extra netlink-level debug and
lowers the recv() buffer size in one go. When used
without any argument (--dbg-small-recv) it picks
a very small default (4000), explicit size can be set,
too (--dbg-small-recv 5000).
Example:
$ ./cli.py [...] --dbg-small-recv
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 3968 bytes, 31 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 532 bytes, 5 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
(the [...] are edits to shorten the commit message).
Note that the first message of the dump is sized conservatively
by the kernel.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For manual debug, allow printing the netlink level messages
to stderr.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the size of the buffer we use for recv() configurable.
The details of the buffer sizing in netlink are somewhat
arcane, we could spend a lot of time polishing this API.
Let's just leave some hopefully helpful comments for now.
This is a for-developers-only feature, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add the new line even if message has no error or extack,
which leads to print(nl_msg) ending with two new lines.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build process uses python to generate the user space code.
Remove __pycache__ on make clean.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Donald points out most YNL makefiles are missing distclean
in .PHONY, even tho generated/Makefile does list it.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The make target to remove all generated files used to be called
"hardclean" because it deleted files which were tracked by git.
We no longer track generated user space files, so use the more
common "distclean" name.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
selftest harness uses various exit codes to signal test
results. Avoid calling exit() directly, otherwise tests
may get broken by harness refactoring (like the commit
under Fixes). SKIP() will instruct the harness that the
test shouldn't run, it used to not be the case, but that
has been fixed. So just return, no need to exit.
Note that for hmm-tests this actually changes the result
from pass to skip. Which seems fair, the test is skipped,
after all.
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/05f7bf89-04a5-4b65-bf59-c19456aeb1f0@sirena.org.uk
Fixes: a724707976 ("selftests: kselftest_harness: use KSFT_* exit codes")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240304233621.646054-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test case was minimized from mailing list discussion [0].
It is equivalent to the following C program:
struct iter_limit_bug_ctx { __u64 a; __u64 b; __u64 c; };
static __naked void iter_limit_bug_cb(void)
{
switch (bpf_get_prandom_u32()) {
case 1: ctx->a = 42; break;
case 2: ctx->b = 42; break;
default: ctx->c = 42; break;
}
}
int iter_limit_bug(struct __sk_buff *skb)
{
struct iter_limit_bug_ctx ctx = { 7, 7, 7 };
bpf_loop(2, iter_limit_bug_cb, &ctx, 0);
if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
asm volatile("r1 /= 0;":::"r1");
return 0;
}
The main idea is that each loop iteration changes one of the state
variables in a non-deterministic manner. Hence it is premature to
prune the states that have two iterations left comparing them to
states with one iteration left.
E.g. {{7,7,7}, callback_depth=0} can reach state {42,42,7},
while {{7,7,7}, callback_depth=1} can't.
[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240222154121.6991-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It seems some shells linked to /bin/sh don't have consistent behavior
with error codes on execution failures. Explicitly use /bin/bash so that
"not found" errors are correctly generated. Repeating the comment from
the test:
/*
* Execute as a long pathname relative to "/". If this is a script,
* the interpreter will launch but fail to open the script because its
* name ("/dev/fd/5/xxx....") is bigger than PATH_MAX.
*
* The failure code is usually 127 (POSIX: "If a command is not found,
* the exit status shall be 127."), but some systems give 126 (POSIX:
* "If the command name is found, but it is not an executable utility,
* the exit status shall be 126."), so allow either.
*/
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/02c8bf8e-1934-44ab-a886-e065b37366a7@collabora.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
---
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-mm@kvack.org
Cc: linux-kselftest@vger.kernel.org
Explicitly close() guest_memfd files in various guest_memfd and
private_mem_conversions tests, there's no reason to keep the files open
until the test exits.
Fixes: 8a89efd434 ("KVM: selftests: Add basic selftest for guest_memfd()")
Fixes: 43f623f350 ("KVM: selftests: Add x86-only selftest for private memory conversions")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20240227015716.27284-1-dongli.zhang@oracle.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
With the removal of the ARCH_NR_GPIOS, the number of available GPIOs
is effectively unlimited, causing the gpio-mockup module load failure
test that overflowed the number of GPIOs to unexpectedly succeed, and
so fail.
The test is no longer relevant so remove it.
Promote the "no lines defined" test so there is still one load
failure test in the basic set.
Fixes: 7b61212f2a ("gpiolib: Get rid of ARCH_NR_GPIOS")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: https://lore.kernel.org/linux-gpio/ZC6OHBjdwBdT4sSb@xpf.sh.intel.com/
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This test is userspace code, but uses some kernel headers via symlinks,
and mocks other headers, in order to test load_unaligned_zeropad().
Currently the test fails to build with:
In file included from load_unaligned_zeropad.c:26:
word-at-a-time.h:7:10: fatal error: linux/bitops.h: No such file or directory
7 | #include <linux/bitops.h>
This is due to the recent changes to the kernel headers.
Fix it by symlinking the new wordpart.h, and creating an empty stub for
bitops.h which is all that's needed.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 66a5c40f60 ("kernel.h: removed REPEAT_BYTE from kernel.h")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20240305125644.3315910-1-mpe@ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
These tests generate various IPv6 flows, encapsulate them in GRE packets
and check that the encapsulated packets are distributed between the
available nexthops according to the configured weights.
Unlike the corresponding IPv4 tests, these tests sometimes fail in the
netdev CI because of large discrepancies between the expected and
measured ratios [1]. This can be explained by the fact that the IPv4
tests generate about 3,600 different flows whereas the IPv6 tests only
generate about 784 different flows (potentially by mistake).
Fix by aligning the IPv6 tests to the IPv4 ones and increase the number
of generated flows.
[1]
[...]
# TEST: ping [ OK ]
# INFO: Running IPv6 over GRE over IPv4 multipath tests
# TEST: ECMP [FAIL]
# Too large discrepancy between expected and measured ratios
# INFO: Expected ratio 1.00 Measured ratio 1.18
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests sometimes fail on the netdev CI because the expected number
of packets is larger than expected [1].
Make the tests more robust by specifically matching on VXLAN
encapsulated packets and allowing up to five stray packets instead of
just two.
[1]
[...]
# TEST: VXLAN: ECN encap: 0x00->0x00 [FAIL]
# v1: Expected to capture 10 packets, got 13.
# TEST: VXLAN: ECN encap: 0x01->0x01 [ OK ]
# TEST: VXLAN: ECN encap: 0x02->0x02 [ OK ]
# TEST: VXLAN: ECN encap: 0x03->0x02 [ OK ]
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ageing time used by the test is too short for debug kernels and
results in entries being aged out prematurely [1].
Fix by increasing the ageing time.
[1]
# ./vxlan_bridge_1q.sh
[...]
INFO: learning vlan 10
TEST: VXLAN: flood before learning [ OK ]
TEST: VXLAN: show learned FDB entry [ OK ]
TEST: VXLAN: learned FDB entry [FAIL]
swp4: Expected to capture 0 packets, got 10.
RTNETLINK answers: No such file or directory
TEST: VXLAN: deletion of learned FDB entry [ OK ]
TEST: VXLAN: Ageing of learned FDB entry [FAIL]
swp4: Expected to capture 0 packets, got 10.
TEST: VXLAN: learning toggling on bridge port [ OK ]
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test configures a policer with a rate of 80Mbps and expects to
measure a rate close to it. This is a too high rate for debug kernels,
causing the test to fail [1].
Fix by reducing the rate to 10Mbps.
[1]
# ./tc_police.sh
TEST: police on rx [FAIL]
Expected rate 76.2Mbps, got 29.6Mbps, which is -61% off. Required accuracy is +-10%.
TEST: police on tx [FAIL]
Expected rate 76.2Mbps, got 30.4Mbps, which is -60% off. Required accuracy is +-10%.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The various multipath tests use mausezahn to generate different flows
and check how they are distributed between the available nexthops. The
tool is currently invoked with an hard coded transmission delay of 1 ms.
This is unnecessary when the tests are run with veth pairs and
needlessly prolongs the tests.
Parametrize this delay and default it to 0 us. It can be overridden
using the forwarding.config file. On my system, this reduces the run
time of router_multipath.sh by 93%.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The multipath tests currently test both the L3 and L4 multipath hash
policies for IPv6, but only the L4 policy for IPv4. The reason is mostly
historic: When the initial multipath test was added
(router_multipath.sh) the IPv6 L4 policy did not exist and was later
added to the test. The other multipath tests copied this pattern
although there is little value in testing both policies.
Align the IPv4 and IPv6 tests and only test the L4 policy. On my system,
this reduces the run time of router_multipath.sh by 89% because of the
repeated ping6 invocations to randomize the flow label.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
introduce vhost_net_test for both vhost_net tx and rx basing
on virtio_test to test vhost_net changing in the kernel.
Steps for vhost_net tx testing:
1. Prepare a out buf.
2. Kick the vhost_net to do tx processing.
3. Do the receiving in the tun side.
4. verify the data received by tun is correct.
Steps for vhost_net rx testing:
1. Prepare a in buf.
2. Do the sending in the tun side.
3. Kick the vhost_net to do rx processing.
4. verify the data received by vhost_net is correct.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PARTIAL_NODE slab_state has gone with SLAB removed, so just
remove it.
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add the dependsOn test check for all the mirred blockcast tests.
It will prevent the issue reported by LKFT which happens when an older
iproute2 is used to run the current tdc.
Tests are skipped if the dependsOn check fails.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20240229143825.1373550-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes :
- "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh
- "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh
Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228120701.422264-1-pvkumar5749404@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is used to test split_huge_page_to_list_to_order for pagecache THPs.
Also add test cases for split_huge_page_to_list_to_order via both debugfs.
[ziy@nvidia.com: fix issue discovered with NFS]
Link: https://lkml.kernel.org/r/262E4DAA-4A78-4328-B745-1355AE356A07@nvidia.com
Link: https://lkml.kernel.org/r/20240226205534.1603748-9-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: misc fixes".
Misc fixes for DAMON selftets on behalf of the original authors.
This patch (of 2):
This patch resolves a spelling error in the test log, preventing potential
confusion.
It is submitted as part of my application to the "Linux Kernel Bug Fixing
Spring Unpaid 2024" mentorship program of the Linux Foundation.
Link: https://lore.kernel.org/r/20240204122523.14160-1-vincenzo.mezzela@gmail.com
Link: https://lkml.kernel.org/r/20240221211148.46522-2-sj@kernel.org
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Create and load a struct_ops map with a large number of struct_ops
programs to generate trampolines taking a size over multiple pages. The
map includes 40 programs. Their trampolines takes 6.6k+, more than 1.5
pages, on x86.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add new basic kselftest that checks if the available rust sample modules
can be added and removed correctly.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Sergio Gonzalez Collado <sergio.collado@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In current ping-pong design, xdp_hw_metadata will wait until the packet
transmission completely done, then only start to receive the next packet.
The current sleep interval is 10ms, which is unnecessary large. Typically,
a NIC does not need such a long time to transmit a packet. Furthermore,
during this 10ms sleep time, the app is unable to receive incoming packets.
Therefore, this commit reduce sleep interval to 10us, so that
xdp_hw_metadata is able to support periodic packets with shorter interval.
10us * 500 = 5ms should be enough for packet transmission and status
retrieval.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20240303083225.1184165-2-yoong.siang.song@intel.com
Settle on three "flavors" of uprobe/uretprobe, installed on different
kinds of instruction: nop, push, and ret. All three are testing
different internal code paths emulating or single-stepping instructions,
so are interesting to compare and benchmark separately.
To ensure `push rbp` instruction we ensure that uprobe_target_push() is
not a leaf function by calling (global __weak) noop function and
returning something afterwards (if we don't do that, compiler will just
do a tail call optimization).
Also, we need to make sure that compiler isn't skipping frame pointer
generation, so let's add `-fno-omit-frame-pointers` to Makefile.
Just to give an idea of where we currently stand in terms of relative
performance of different uprobe/uretprobe cases vs a cheap syscall
(getpgid()) baseline, here are results from my local machine:
$ benchs/run_bench_uprobes.sh
base : 1.561 ± 0.020M/s
uprobe-nop : 0.947 ± 0.007M/s
uprobe-push : 0.951 ± 0.004M/s
uprobe-ret : 0.443 ± 0.007M/s
uretprobe-nop : 0.471 ± 0.013M/s
uretprobe-push : 0.483 ± 0.004M/s
uretprobe-ret : 0.306 ± 0.007M/s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240301214551.1686095-1-andrii@kernel.org
In the function btf__load_vmlinux_btf, the debug message incorrectly
refers to 'path' instead of 'sysfs_btf_path'.
Signed-off-by: Chen Shen <peterchenshen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240302062218.3587-1-peterchenshen@gmail.com
This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl get $id
This patch adds token argument for it to support userspace PM:
pm_nl_ctl get $id token $token
If 'token $token' is passed to get_addr(), copy it into the kernel netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.
This helper will be used for userspace dump addresses tests.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl dump
This patch adds token argument for it to support userspace PM:
pm_nl_ctl dump token $token
If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in
pm_nl_ctl.c when subflow is created by a userspace PM.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.
If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.
When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.
While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.
Fixes: b4b51d36bb ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!
So we should do ret=${KSFT_FAIL} instead.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cddec ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The threads data structure is an array of hashmaps, previously
rbtrees. The two levels allows for a fixed outer array where access is
guarded by rw_semaphores. Commit 91e467bc56 ("perf machine: Use
hashtable for machine threads") sized the outer table at 256 entries
to avoid future scalability problems, however, this means the threads
struct is sized at 30,720 bytes. As the hashmaps allow O(1) access for
the common find/insert/remove operations, lower the number of entries
to 8. This reduces the size overhead to 960 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-8-irogers@google.com
The rbtree provides a sorting on entries but this is unused. Switch to
using hashmap for O(1) rather than O(log n) find/insert/remove
complexity.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-7-irogers@google.com
Move threads out of machine and into its own file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-6-irogers@google.com
Move thread_rb_node into the machine.c file. This hides the
implementation of threads from the rest of the code allowing for it to
be refactored.
Locking discipline is tightened up in this change. As the lock is now
encapsulated in threads, the findnew function requires holding it (as
it already did in machine). Rather than do conditionals with locks
based on whether the thread should be created (which could potentially
be error prone with a read lock match with a write unlock), have a
separate threads__find that won't create the thread and only holds the
read lock. This effectively duplicates the findnew logic, with the
existing findnew logic only operating under a write lock assuming
creation is necessary as a previous find failed. The creation may
still fail with the write lock due to another thread. The duplication
is removed in a later next patch that delegates the implementation to
hashtable.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-5-irogers@google.com
Avoid exposing the threads data structure by switching to the callback
machine__for_each_thread approach. machine__fprintf is only used in
tests and verbose >3 output so don't turn to list and sort. Add
machine__threads_nr to be refactored later.
Note, all existing *_fprintf routines ignore fprintf errors.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-4-irogers@google.com
Commit 91e467bc56 ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf trace
--summary output sorts and prints each hash bucket, rather than all
threads globally. Change this behavior by turn all threads into a
list, sort the list by number of trace events then by tids, finally
print the list. This also allows the rbtree in threads to be not
accessed outside of machine.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-3-irogers@google.com
Commit 91e467bc56 ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf report
--tasks output now shows child threads in an order determined by the
hashing. For example, in this snippet tid 3 appears after tid 256 even
though they have the same ppid 2:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
2 2 0 | kthreadd
256 256 2 | kworker/12:1H-k
693761 693761 2 | kworker/10:1-mm
13017621301762 2 | kworker/1:1-mm_
1302530 1302530 2 | kworker/u32:0-k
3 3 2 | rcu_gp
...
```
The output is easier to read if threads appear numerically
increasing. To allow for this, read all threads into a list then sort
with a comparator that orders by the child task's of the first common
parent. The list creation and deletion are created as utilities on
machine. The indentation is possible by counting the number of
parents a child has.
With this change the output for the same data file is now like:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
1 1 0 | systemd
823 823 1 | systemd-journal
853 853 1 | systemd-udevd
3230 3230 1 | systemd-timesyn
3236 3236 1 | auditd
3239 3239 3236 | audisp-syslog
3321 3321 1 | accounts-daemon
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-2-irogers@google.com
L3PMCx0AC and L3PMCx0AD, used in l3_xi_sampled_latency* events, have a
quirk that requires them to be programmed with SliceId set to 0x3.
Without this, the events do not count at all and affects dependent
metrics such as l3_read_miss_latency.
If ThreadMask is not specified, the amd-uncore driver internally sets
ThreadMask to 0x3, EnAllCores to 0x1 and EnAllSlices to 0x1 but does
not set SliceId. Since SliceId must also be set to 0x3 in this case,
specify all the other fields explicitly.
E.g.
$ sudo perf stat -e l3_xi_sampled_latency.all,l3_xi_sampled_latency_requests.all -a sleep 1
Before:
Performance counter stats for 'system wide':
0 l3_xi_sampled_latency.all
0 l3_xi_sampled_latency_requests.all
1.005155399 seconds time elapsed
After:
Performance counter stats for 'system wide':
921,446 l3_xi_sampled_latency.all
54,210 l3_xi_sampled_latency_requests.all
1.005664472 seconds time elapsed
Fixes: 5b2ca349c3 ("perf vendor events amd: Add Zen 4 uncore events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ananth.narayan@amd.com
Cc: ravi.bangoria@amd.com
Cc: eranian@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301084431.646221-1-sandipan.das@amd.com
This is useful for scripts that work with Perf and ETM trace. Rather
than them trying to parse Perf's error output at runtime to see if it
was linked or not.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: al.grant@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301133829.346286-1-james.clark@arm.com
- Fix IOMMU table initialisation when doing kdump over SR-IOV.
- Fix incorrect RTAS function name for resetting TCE tables.
- Fix fpu_signal selftest failures since a recent change.
Thanks to: Gaurav Batra, Nathan Lynch.
-----BEGIN PGP SIGNATURE-----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=MSDF
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
There's an almost identical code sequence to specify load/store access
hints in __copy_tofrom_user_power7(), copypage_power7() and
memcpy_power7().
Move the sequence into a common macro, which is passed the registers to
use as they differ slightly.
There also needs to be a copy in the selftests, it could be shared in
future if the headers are cleaned up / refactored.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-1-mpe@ellerman.id.au
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZeEKVAAKCRDbK58LschI
g7oYAQD5Jlv4fIVTvxvfZrTTZ2tU+OsPa75mc8SDKwpash3YygEA8kvESy8+t6pg
D6QmSf1DIZdFoSp/bV+pfkNWMeR8gwg=
=mTAj
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My recent commit e5d00aaac6 ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.
It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.
Also use the newly added randomise_darray() to properly randomise darray.
Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.
Fixes: e5d00aaac6 ("selftests/powerpc: Check all FPRs in fpu_preempt")
Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Depends-on: 2ba107f679 ("selftests/powerpc: Generate better bit patterns for FPU tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240301101035.1230024-1-mpe@ellerman.id.au
I cleared IFF_NOARP flag from netdevsim dev->flags in order to support
skb forwarding. This breaks the rtnetlink.sh selftest
kci_test_ipsec_offload() test because ipsec does not connect to peers it
cannot transmit to.
Fix the issue by adding a neigh entry manually. ipsec_offload test now
successfully pass.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Connect two netdevsim ports in different namespaces together, then send
packets between them using socat.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCTP does not support IP_LOCAL_PORT_RANGE and we know it,
so use XFAIL instead of SKIP.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently some tests report skip for things they expect to fail
e.g. when given combination of parameters is known to be unsupported.
This is confusing because in an ideal test environment and fully
featured kernel no tests should be skipped.
Selftest summary line already includes xfail and xpass counters,
e.g.:
Totals: pass:725 fail:0 xfail:0 xpass:0 skip:0 error:0
but there's no way to use it from within the harness.
Add a new per-fixture+variant combination list of test cases
we expect to fail.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch to printing KTAP line for PASS / FAIL with ksft_test_result_code(),
this gives us the ability to report diagnostic messages.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the spec we should always print a # if we add
a diagnostic message. Having the caller pass in the new line
as part of diagnostic message makes handling this a bit
counter-intuitive, so append the new line in the helper.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub points out that for parsers it's rather useful to always
have the test name on the result line. Currently if we SKIP
(or soon XFAIL or XPASS), we will print:
ok 17 # SKIP SCTP doesn't support IP_BIND_ADDRESS_NO_PORT
^
no test name
Always print the test name.
KTAP format seems to allow or even call for it, per:
https://docs.kernel.org/dev-tools/ktap.html
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/87jzn6lnou.fsf@cloudflare.com/
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For generic test harness code it's more useful to deal with exit
codes directly, rather than having to switch on them and call
the right ksft_test_result_*() helper. Add such function to kselftest.h.
Note that "directive" and "diagnostic" are what ktap docs call
those parts of the message.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We always use skip in combination with exit_code being 0
(KSFT_PASS). This are basic KSFT / KTAP semantics.
Store the right KSFT_* code in exit_code directly.
This makes it easier to support tests reporting other
extended KSFT_* codes like XFAIL / XPASS.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of tracking passed = 0/1 rename the field to exit_code
and invert the values so that they match the KSFT_* exit codes.
This will allow us to fold SKIP / XFAIL into the same value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we added variant support generating full test case
name takes 4 string arguments. We're about to need it
in another two places. Stop the duplication and print
once into a temporary buffer.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we no longer need low exit codes to communicate
assertion steps - use normal KSFT exit codes.
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace Landlock-specific TEST_F_FORK() with an improved TEST_F() which
brings four related changes:
Run TEST_F()'s tests in a grandchild process to make it possible to
drop privileges and delegate teardown to the parent.
Compared to TEST_F_FORK(), simplify handling of the test grandchild
process thanks to vfork(2), and makes it generic (e.g. no explicit
conversion between exit code and _metadata).
Compared to TEST_F_FORK(), run teardown even when tests failed with an
assert thanks to commit 63e6b2a423 ("selftests/harness: Run TEARDOWN
for ASSERT failures").
Simplify the test harness code by removing the no_print and step fields
which are not used. I added this feature just after I made
kselftest_harness.h more broadly available but this step counter
remained even though it wasn't needed after all. See commit 369130b631
("selftests: Enhance kselftest_harness.h to print which assert failed").
Replace spaces with tabs in one line of __TEST_F_IMPL().
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This has the effect of creating a new test process for either TEST_F()
or TEST_F_FORK(), which doesn't change tests but will ease potential
backports. See next commit for the TEST_F_FORK() merge into TEST_F().
Cc: Günther Noack <gnoack@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If SAVE and RESTORE unwind hints are in different basic blocks, and
objtool sees the RESTORE before the SAVE, it errors out with:
vmlinux.o: warning: objtool: vmw_port_hb_in+0x242: objtool isn't smart enough to handle this CFI save/restore combo
In such a case, defer following the RESTORE block until the
straight-line path gets followed later.
Fixes: 8faea26e61 ("objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402240702.zJFNmahW-lkp@intel.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240227073527.avcm5naavbv3cj5s@treble
Signed-off-by: Kees Cook <keescook@chromium.org>
The find will get the map, ensure puts are done on all paths.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240229062048.558799-1-irogers@google.com
Change the values of fields, including scalar types and function pointers,
and check if the struct_ops map works as expected.
The test changes the field "test_2" of "testmod_1" from the pointer to
test_2() to pointer to test_3() and the field "data" to 13. The function
test_2() and test_3() both compute a new value for "test_2_result", but in
different way. By checking the value of "test_2_result", it ensures the
struct_ops map works as expected with changes through shadow types.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-6-thinker.li@gmail.com
The example in bpftool-gen.8 explains how to use the pointer of the shadow
type to change the value of a field of a struct_ops map.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-5-thinker.li@gmail.com
Declares and defines a pointer of the shadow type for each struct_ops map.
The code generator will create an anonymous struct type as the shadow type
for each struct_ops map. The shadow type is translated from the original
struct type of the map. The user of the skeleton use pointers of them to
access the values of struct_ops maps.
However, shadow types only supports certain types of fields, including
scalar types and function pointers. Any fields of unsupported types are
translated into an array of characters to occupy the space of the original
field. Function pointers are translated into pointers of the struct
bpf_program. Additionally, padding fields are generated to occupy the space
between two consecutive fields.
The pointers of shadow types of struct_osp maps are initialized when
*__open_opts() in skeletons are called. For a map called FOO, the user can
access it through the pointer at skel->struct_ops.FOO.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-4-thinker.li@gmail.com
Convert st_ops->data to the shadow type of the struct_ops map. The shadow
type of a struct_ops type is a variant of the original struct type
providing a way to access/change the values in the maps of the struct_ops
type.
bpf_map__initial_value() will return st_ops->data for struct_ops types. The
skeleton is going to use it as the pointer to the shadow type of the
original struct type.
One of the main differences between the original struct type and the shadow
type is that all function pointers of the shadow type are converted to
pointers of struct bpf_program. Users can replace these bpf_program
pointers with other BPF programs. The st_ops->progs[] will be updated
before updating the value of a map to reflect the changes made by users.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-3-thinker.li@gmail.com
For a struct_ops map, btf_value_type_id is the type ID of it's struct
type. This value is required by bpftool to generate skeleton including
pointers of shadow types. The code generator gets the type ID from
bpf_map__btf_value_type_id() in order to get the type information of the
struct type of a map.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-2-thinker.li@gmail.com
Parallel testing appears to show a race between allocating and setting
evsel ids. As there is a bounds check on the xyarray it yields a segv
like:
```
AddressSanitizer:DEADLYSIGNAL
=================================================================
==484408==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010
==484408==The signal is caused by a WRITE memory access.
==484408==Hint: address points to the zero page.
#0 0x55cef5d4eff4 in perf_evlist__id_hash tools/lib/perf/evlist.c:256
#1 0x55cef5d4f132 in perf_evlist__id_add tools/lib/perf/evlist.c:274
#2 0x55cef5d4f545 in perf_evlist__id_add_fd tools/lib/perf/evlist.c:315
#3 0x55cef5a1923f in store_evsel_ids util/evsel.c:3130
#4 0x55cef5a19400 in evsel__store_ids util/evsel.c:3147
#5 0x55cef5888204 in __run_perf_stat tools/perf/builtin-stat.c:832
#6 0x55cef5888c06 in run_perf_stat tools/perf/builtin-stat.c:960
#7 0x55cef58932db in cmd_stat tools/perf/builtin-stat.c:2878
...
```
Avoid this crash by early exiting the perf_evlist__id_add_fd and
perf_evlist__id_add is the access is out-of-bounds.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240229070757.796244-1-irogers@google.com
Currently it accounts the contention using delta between timestamps in
lock:contention_begin and lock:contention_end tracepoints. But it means
the lock should see the both events during the monitoring period.
Actually there are 4 cases that happen with the monitoring:
monitoring period
/ \
| |
1: B------+-----------------------+--------E
2: B----+-------------E |
3: | B-----------+----E
4: | B-------------E |
| |
t0 t1
where B and E mean contention BEGIN and END, respectively. So it only
accounts the case 4 for now. It seems there's no way to handle the case
1. The case 2 might be handled if it saved the timestamp (t0), but it
lacks the information from the B notably the flags which shows the lock
types. Also it could be a nested lock which it currently ignores. So
I think we should ignore the case 2.
However we can handle the case 3 if we save the timestamp (t1) at the
end of the period. And then it can iterate the map entries in the
userspace and update the lock stat accordinly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviwed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240228053335.312776-1-namhyung@kernel.org
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
A metric may have no events, for example, the transaction metrics on
x86 are dependent on there being TSX events. Fix a segv where an evsel
of NULL is dereferenced for a metric leader value.
Fixes: a59fb796a3 ("perf metrics: Compute unmerged uncore metrics individually")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240224011420.3066322-2-irogers@google.com
The metric match function fails for cases like looking for "metric" in
the string "all;foo_metric;metric" as the "metric" in "foo_metric"
matches but isn't preceeded by a ';'. Fix this by matching the first
list item and recursively matching on failure the next item after a
semicolon.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240224011420.3066322-1-irogers@google.com
In preparation for KUnit testing and further improvements in fortify
failure reporting, split out the report and encode the function and access
failure (read or write overflow) into a single u8 argument. This mainly
ends up saving a tiny bit of space in the data segment. For a defconfig
with FORTIFY_SOURCE enabled:
$ size gcc/vmlinux.before gcc/vmlinux.after
text data bss dec hex filename
26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before
26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
We have one outstanding issue with the stmmac driver, which may
be a LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = "10gbase-r" in the device tree
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T2ty
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
-----BEGIN PGP SIGNATURE-----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=2BRo
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vpmu_counter_access's disable_counter() carries a bug that disables
all the counters that are enabled, instead of just the requested one.
Fortunately, it's not an issue as there are no callers of it. Hence,
instead of fixing it, remove the definition entirely.
Remove enable_counter() as it's unused as well.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231122221526.2750966-1-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Rename some test cases to avoid overlapping test names which is
problematic for the kernel test robot. No changes in the test's logic.
Suggested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240227170418.491442-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend sev_smoke_test to also run a minimal SEV-ES smoke test so that it's
possible to test KVM's unique VMRUN=>#VMEXIT path for SEV-ES guests
without needing a full blown SEV-ES capable VM, which requires a rather
absurd amount of properly configured collateral.
Punt on proper GHCB and ucall support, and instead use the GHCB MSR
protocol to signal test completion. The most important thing at this
point is to have _any_ kind of testing of KVM's __svm_sev_es_vcpu_run().
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a basic smoke test for SEV guests to verify that KVM can launch an
SEV guest and run a few instructions without exploding. To verify that
SEV is indeed enabled, assert that SEV is reported as enabled in
MSR_AMD64_SEV, a.k.a. SEV_STATUS, which cannot be intercepted by KVM
(architecturally enforced).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Suggested-by: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: rename to "sev_smoke_test"]
Link: https://lore.kernel.org/r/20240223004258.3104051-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Port the existing intra-host SEV(-ES) migration test to the recently added
SEV library, which handles much of the boilerplate needed to create and
configure SEV guests.
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a library/APIs for creating and interfacing with SEV guests, all of
which need some amount of common functionality, e.g. an open file handle
for the SEV driver (/dev/sev), ioctl() wrappers to pass said file handle
to KVM, tracking of the C-bit, etc.
Add an x86-specific hook to initialize address properties, a.k.a. the
location of the C-bit. An arch specific hook is rather gross, but x86
already has a dedicated #ifdef-protected kvm_get_cpu_address_width() hook,
i.e. the ugliest code already exists.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for tagging and untagging guest physical address, e.g. to
allow x86's SEV and TDX guests to embed shared vs. private information in
the GPA. SEV (encryption, a.k.a. C-bit) and TDX (shared, a.k.a. S-bit)
steal bits from the guest's physical address space that is consumed by the
CPU metadata, i.e. effectively aliases the "real" GPA.
Implement generic "tagging" so that the shared vs. private metadata can be
managed by x86 without bleeding too many details into common code.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To stick to libmnl wrappers in the past we had to use poll()
to check if there are any outstanding notifications on the socket.
This is no longer necessary, we can use MSG_DONTWAIT.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-16-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most libmnl socket helpers can be replaced by direct calls to
the underlying libc API. We need portid, the netlink manpage
suggests we bind() address of zero.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-14-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing callbacks take struct ynl_parse_arg as the argument.
Make that official by using a local callback type instead of mnl_cb_t.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's only one set of callbacks in YNL, for netlink control
messages, and most of them are trivial. So implement the message
walking directly without depending on mnl_cb_run2().
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl_recv_ack() is simple and it's the only user of mnl_cb_run().
Now that ynl_sock_read_msgs() exists it's actually less code
to use ynl_sock_read_msgs() instead of being special.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All callers to mnl_cb_run2() call mnl_socket_recvfrom() right before.
Wrap the two in a helper, take typed arguments (struct ynl_parse_arg),
instead of hoping that all callers remember that parser error handling
requires yarg.
In case of ynl_sock_read_family() we will no longer check for kernel
returning no data, but that would be a kernel bug, not worth complicating
the code to catch this. Calling mnl_cb_run2() on an empty buffer
is legal and results in STOP (1).
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f2ba1e5e22 ("tools: ynl-gen: stop generating common notification handlers")
removed the last caller of the parse_cb_run() helper.
We no longer need to export ynl_cb_array.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing code expects a pointer to struct ynl_parse_arg AKA yarg.
For dump was pass in struct ynl_dump_state, which works fine, because
struct ynl_dump_state and struct ynl_parse_arg have identical layout
for the members that matter.. but it's a bit hacky.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create helpers for accessing payloads of struct nlmsg.
Use them instead of the libmnl ones.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't use mnl attr helpers, we're trying to remove the libmnl
dependency. Create both signed and unsigned helpers, libmnl
had unsigned helpers, so code generator no longer needs
the mnl_type() hack.
The new helpers are written from first principles, but are
hopefully not too buggy.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The temporary auto-int helpers are not really correct.
We can't treat signed and unsigned ints the same when
determining whether we need full 8B. I realized this
before sending the patch to add support in libmnl.
Unfortunately, that patch has not been merged,
so time to fix our local helpers. Use the mnl* name
for now, subsequent patches will address that.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.
As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:
$ ./samples/netdev
YNL: Multicast group 'mgmt' not found
Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 7c59c9c8f2 ("tools: ynl: generate code for ovs families")
we need relatively recent OvS headers to get YNL to compile.
Add the direct include workaround to fix compilation on less
up-to-date OSes like CentOS 9.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240226225806.1301152-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test case for multicast packet confirm race.
Without preceding patch, this should result in:
WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0
Workqueue: events_unbound macvlan_process_broadcast
RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0
? __nf_conntrack_confirm+0x3ed/0x5f0
nf_confirm+0x2ad/0x2d0
nf_hook_slow+0x36/0xd0
ip_local_deliver+0xce/0x110
__netif_receive_skb_one_core+0x4f/0x70
process_backlog+0x8c/0x130
[..]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Allocate the common ucall pool using vm_vaddr_alloc_shared() so that the
ucall structures will be placed in shared (unencrypted) memory for VMs
with support for protected (encrypted) memory, e.g. x86's SEV.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Test programs may wish to allocate shared vaddrs for things like
sharing memory with the guest. Since protected vms will have their
memory encrypted by default an interface is needed to explicitly
request shared pages.
Implement this by splitting the common code out from vm_vaddr_alloc()
and introducing a new vm_vaddr_alloc_shared().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for differentiating between protected (a.k.a. private, a.k.a.
encrypted) memory and normal (a.k.a. shared) memory for VMs that support
protected guest memory, e.g. x86's SEV. Provide and manage a common
bitmap for tracking whether a given physical page resides in protected
memory, as support for protected memory isn't x86 specific, i.e. adding a
arch hook would be a net negative now, and in the future.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add sparsebit_for_each_set_range() to allow iterator over a range of set
bits in a range. This will be used by x86 SEV guests to process protected
physical pages (each such page needs to be encrypted _after_ being "added"
to the VM).
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: split to separate patch]
Link: https://lore.kernel.org/r/20240223004258.3104051-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make all sparsebit struct pointers "const" where appropriate. This will
allow adding a bitmap to track protected/encrypted physical memory that
tests can access in a read-only fashion.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Carve out space in the @shape passed to the various VM creation helpers to
allow using the shape to control the subtype of VM, e.g. to identify x86's
SEV VMs (which are "regular" VMs as far as KVM is concerned).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kselftest_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-9-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kvm_test_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-8-thuth@redhat.com
[sean: make host_cap static]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kvm_test_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-7-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The sync_regs test currently does not have any output (unless one
of the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftest_harness.h / kvm_test_harness.h
interface.
To be able to use the interface, we have to break up the huge main()
function here in more fine grained parts - then we can use the new
KVM_ONE_VCPU_TEST() macro to define the individual tests. Since these
are run with a separate VM now, we have also to make sure to create
the expected state at the beginning of each test, so some parts grow
a little bit - which should be OK considering that the individual
tests are more self-contained now.
Suggested-by: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-6-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Most tests are currently not giving any proper output for the user
to see how much sub-tests have already been run, or whether new
sub-tests are part of a binary or not. So it would be good to
support TAP output in the KVM selftests. There is already a nice
framework for this in the kselftest_harness.h header which we can
use. But since we also need a vcpu in most KVM selftests, it also
makes sense to introduce our own wrapper around this which takes
care of creating a VM with one vcpu, so we don't have to repeat
this boilerplate in each and every test. Thus let's introduce
a KVM_ONE_VCPU_TEST() macro here which takes care of this.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/Y2v+B3xxYKJSM%2FfH@google.com/
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-5-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the code to set a vCPU's entry point out of vm_arch_vcpu_add() and
into a new API, vcpu_arch_set_entry_point(). Providing a separate API
will allow creating a KVM selftests hardness that can handle tests that
use different entry points for sub-tests, whereas *requiring* the entry
point to be specified at vCPU creation makes it difficult to create a
generic harness, e.g. the boilerplate setup/teardown can't easily create
and destroy the VM and vCPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-4-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The directory itself doesn't need have path handling, since it's only to
mean where is the directory that contains modules to be built.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
By checking if KDIR is a valid directory we can safely skip the tests if
kernel-devel isn't installed (default value of KDIR), or if KDIR
variable passed doesn't exists.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402191417.XULH88Ct-lkp@intel.com/
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Ignore the binary used to test livepatching a syscall.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The prologue generation code has been modified to make the callback
program use the stack of the program marked as exception boundary where
callee-saved registers are already pushed.
As the bpf_throw function never returns, if it clobbers any callee-saved
registers, they would remain clobbered. So, the prologue of the
exception-boundary program is modified to push R23 and R24 as well,
which the callback will then recover in its epilogue.
The Procedure Call Standard for the Arm 64-bit Architecture[1] states
that registers r19 to r28 should be saved by the callee. BPF programs on
ARM64 already save all callee-saved registers except r23 and r24. This
patch adds an instruction in prologue of the program to save these
two registers and another instruction in the epilogue to recover them.
These extra instructions are only added if bpf_throw() is used. Otherwise
the emitted prologue/epilogue remains unchanged.
[1] https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240201125225.72796-3-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>