Apply the GFXIP 9.4.3 specific snoop and mtype settings for various
scenarios such as APU, APU in Carveout mode and dGPU mode.
Note: This is expected to change due to:
1 - NPS > 1 support in future
2 - Hardware bugs found during initial asic bringup.
Cc: Graham Sider <graham.sider@amd.com>
Cc: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a mask of available active clusters instead of using only the number
of active clusters.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA instances per active cluster and SDMA instance mask are used
to find the number of active clusters.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move soc specific configuration details to aqua vanjaram specific file.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just like the KIQ, KCQ need to clear the doorbell related regs as well
to avoid hangs when to load driver again after unloading.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On ASICs with PSPv13.0.6, TMR is reserved at boot time. There is no need
to allocate TMR region by driver. However, it's still required to send
SETUP_TMR command to PSP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize with the IP specific functions needed for GFXHUB, GFX and
SDMA.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add functions required to suspend/resume instances of SDMA which
are part of an XCP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add functions required for suspend/resume of GFXHUB instances which are
part of an XCP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFXv9.4.3, use SOC level partition switch implementation rather than
keeping them at GFX IP level. Change the exisiting implementation in
GFX IP for keeping partition mode and restrict it to only GFX related
switch.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function to initialize soc configuration information for GC 9.4.3
ASICs. Use it to map IPs and other SOC related information once IP
configuration information is available through discovery.
For GC9.4.3 compute partition related callbacks are initialized as part
of configuration init.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switching the partition mode configuration of ASIC is SOC
level function rather than something at GFX core level. Add
partition mode switch functions as SOC specific callbacks.
Implement the XCP manager callbacks needed for partition
switch for GC 9.4.3 based ASICs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Within a device, an accelerator core partition can be constituted with
different IP instances. These partitions are spatial in nature. Number
of partitions which can exist at the same time depends on the 'partition
mode'. Add a manager entity which is responsible for switching between
different partition modes and maintaining partitions. It is also
responsible for suspend/resume of different partitions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more XCC specific functions and use them from IP block functions.
RLC, CP functions are further split to have xcc specific versions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 'xcc' prefix to xcc specific functions to distinguish from IP block
functions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GPXIP 9.4.3 APU, in no carveout mode there is no real vram heap and
could be emulated by the driver over the interleaved NUMA system memory
and the APU could also be in the carveout mode during early development
stage or otherwise for debugging purpose so introduce a new member in
amdgpu_gmc to figure out whether the APU is in the native mode as per
the production configuration. AMD_IS_APU cannot be used for Accelerated
Processing Platform APUs as it might be used in a different context on
previous generations or on small APUs.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Graham Sider <graham.sider@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Output IH cookie node_id and translate it to the corresponding AID id
and XCC id, to help debug the GPU page fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For driver de-init like rmmod operations those partition specific
attributes need to be removed accordingly.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gfx_v9_4_3 and beyond, struct kiq has its own mqd_backup pointer
rather than using the last pointer from mec struct. Then the kfree
operation on the pointer from the mec struct should be removed otherwise
it will cause double free on the first kcq's mqd_backup buffer on XCD1.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip reading runtime db information for PSP 13.0.6.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assign the vm context register addr per aid instance.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Programming of this register is taken care by PSP. Incorrect programming
causes CP not to detect its XCC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reported-by: Alexander Turek <Alexander.Turek@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add helpers to detect the current GPU memory partition.
- Add current memory partition mode sysfs node.
Tested-by: Ori Messinger <Ori.Messinger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callbacks for SMUIO 13.0.3
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx v9_4_3 only support compute. render backend
doesn't need to be involved in any compute shader
execution.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the 'regs2' interface for MMIO
registers to add a new IOCTL command for a 'v2' state
data that includes the XCC ID.
This patch then updates amdgpu_gfx_select_se_sh()
and amdgpu_gfx_select_me_pipe_q() (and the implementations
in the gfx drivers) to support an additional parameter.
This patch then creates a new debugfs interface "gprwave"
which is a merge of shader GPR and wave status access. This
new inteface uses an IOCTL to select banks as well as XCC identity.
(v2) Fix missing xcc_id in wave_ind function
(v3) Fix pm runtime calls and mutex locking
(v4) Fix bad label
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add programming of SDMA golden settings for v4.4.2
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it is used for user space driver to identify gfx_v9_4_3 chip
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IH follows a different identification scheme for its clients. Get the
right mapping of xcc instance from IH node id.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use WREG32_SOC15_EXT to write registers with address larger than 32bit.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMN address which is larger than 32bit has different indications
through bit[34:32] on different AIDs.
v2: put smn addressing of different AIDs into asic specific place
v3: change to ext_id/ext_offset naming
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Truncate the 64bit base address from ip discovery and only store lower 32bit
ip base in reg_offset[].
Bits > 32 follows ASIC specific format, thus just discard them and handle it
within specific ASIC.
By this way reg_offset[] and related helpers can stay unchanged.
v2: make comments more generic
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
version 4 supports 64bit ip base address
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use WREG_SOC15x() instead of WREG32(SOC15_REG_OFFSET())
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Number of instances is extended.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New ip_discovery binary size is increased.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
version 4 supports 64bit ip base address
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New doorbell index assignment is used by aqua_vanjaram.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For aqua vanjaram, add mapping for logical to physical
instances.
v2:
Register accesses on bare metal should be based on physical
instance. Use GET_INST() to get physical instance.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a mask of SDMA instances available for use. On certain ASIC configs,
not all SDMA instances are available for software use.
v2:
Change sdma mask type to uint32_t (Le)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add XCC logical to physical instance map for aqua vanjaram
v2:
Keep look up table only for required IPs, for others return
default mapping (Felix).
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Four basic reasons as below to do the change:
1. number of ring expand a lot on aqua_vanjaram, and adjustment on old
assignment cannot make each ring in a continuous doorbell space.
2. the SDMA doorbell index should not exceed 0x1FF on aqua_vanjaram due to
regDOORBELLx_CTRL_ENTRY.BIF_DOORBELLx_RANGE_OFFSET_ENTRY field width.
3. re-design the doorbell assignment and unify the calculation as
"start + ring/inst id" will make the code much concise.
4. only defining the START/END makes the table look simple
v2: (Lijo)
1. replace name
2. use num_inst_per_aid/sdma_doorbell_range instead of hardcoding
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In GC v9.4.3 there are multiple XCCs. It's required to use
physical instance number to get the right register offset. Use
GET_INST API for that.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On initialization set the partition mode correctly to SPX (default) or
any other user specified partition mode. Use switch_compute_partition
API so that all settings are initialized correctly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update interrupt handling in CPX mode for GFX9.4.3 by using the
VMID space instead of SDMA client id to determine if an interrupt
should be processed by a KFD node. This is especially needed for
handling retry faults from MMHUB.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
