mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-06 19:07:52 +00:00
1215134 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
76fe464c8e |
leds: pwm: Don't disable the PWM when the LED should be off
Disabling a PWM (i.e. calling pwm_apply_state with .enabled = false)
gives no guarantees what the PWM output does. It might freeze where it
currently is, or go in a High-Z state or drive the active or inactive
state, it might even continue to toggle.
To ensure that the LED gets really disabled, don't disable the PWM even
when .duty_cycle is zero.
This fixes disabling a leds-pwm LED on i.MX28. The PWM on this SoC is
one of those that freezes its output on disable, so if you disable an
LED that is full on, it stays on. If you disable a LED with half
brightness it goes off in 50% of the cases and full on in the other 50%.
Fixes:
|
||
![]() |
43e9082fbc |
leds: turris-omnia: Add support for enabling/disabling HW gamma correction
If the MCU on Turris Omnia is running newer firmware versions, the LED controller supports RGB gamma correction (and enables it by default for newer boards). Determine whether the gamma correction setting feature is supported and add the ability to set it via sysfs attribute file. Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230918161104.20860-5-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
cbd6954fec |
leds: turris-omnia: Support HW controlled mode via private trigger
Add support for enabling MCU controlled mode of the Turris Omnia LEDs via a LED private trigger called "omnia-mcu". Recall that private LED triggers will only be listed in the sysfs trigger file for LEDs that support them (currently there is no user of this mechanism). When in MCU controlled mode, the user can still set LED color, but the blinking is done by MCU, which does different things for different LEDs: - WAN LED is blinked according to the LED[0] pin of the WAN PHY - LAN LEDs are blinked according to the LED[0] output of the corresponding port of the LAN switch - PCIe LEDs are blinked according to the logical OR of the MiniPCIe port LED pins In the future I want to make the netdev trigger to transparently offload the blinking to the HW if user sets compatible settings for the netdev trigger (for LEDs associated with network devices). There was some work on this already, and hopefully we will be able to complete it sometime, but for now there are still multiple blockers for this, and even if there weren't, we still would not be able to configure HW controlled mode for the LEDs associated with MiniPCIe ports. In the meantime let's support HW controlled mode via the private LED trigger mechanism. If, in the future, we manage to complete the netdev trigger offloading, we can still keep this private trigger for backwards compatibility, if needed. We also set "omnia-mcu" to cdev->default_trigger, so that the MCU keeps control until the user first wants to take over it. If a different default trigger is specified in device-tree via the 'linux,default-trigger' property, LED class will overwrite cdev->default_trigger, and so the DT property will be respected. Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230918161104.20860-4-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
9f028c9e1c |
leds: turris-omnia: Make set_brightness() more efficient
Implement caching of the LED color and state values that are sent to MCU in order to make the set_brightness() operation more efficient by avoiding I2C transactions which are not needed. On Turris Omnia's MCU, which acts as the RGB LED controller, each LED has a RGB color, and a ON/OFF state, which are configurable via I2C commands CMD_LED_COLOR and CMD_LED_STATE. The CMD_LED_COLOR command sends 5 bytes and the CMD_LED_STATE command 2 bytes over the I2C bus, which operates at 100 kHz. With I2C overhead this allows ~1670 color changing commands and ~3200 state changing commands per second (or around 1000 color + state changes per second). This may seem more than enough, but the issue is that the I2C bus is shared with another peripheral, the MCU. The MCU exposes an interrupt interface, and it can trigger hundreds of interrupts per second. Each time, we need to read the interrupt state register over this I2C bus. Whenever we are sending a LED color/state changing command, the interrupt reading is waiting. Currently, every time LED brightness or LED multi intensity is changed, we send a CMD_LED_STATE command, and if the computed color (brightness adjusted multi_intensity) is non-zero, we also send a CMD_LED_COLOR command. Consider for example the situation when we have a netdev trigger enabled for a LED. The netdev trigger does not change the LED color, only the brightness (either to 0 or to currently configured brightness), and so there is no need to send the CMD_LED_COLOR command. But each change of brightness to 0 sends one CMD_LED_STATE command, and each change of brightness to max_brightness sends one CMD_LED_STATE command and one CMD_LED_COLOR command: set_brightness(0) -> CMD_LED_STATE set_brightness(255) -> CMD_LED_STATE + CMD_LED_COLOR (unnecessary) We can avoid the unnecessary I2C transactions if we cache the values of state and color that are sent to the controller. If the color does not change from the one previously sent, there is no need to do the CMD_LED_COLOR I2C transaction, and if the state does not change, there is no need to do the CMD_LED_STATE transaction. Because we need to make sure that our cached values are consistent with the controller state, add explicit setting of the LED color to white at probe time (this is the default setting when MCU resets, but does not necessarily need to be the case, for example if U-Boot played with the LED colors). Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230918161104.20860-3-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
6de283b96b |
leds: turris-omnia: Do not use SMBUS calls
The leds-turris-omnia driver uses three function for I2C access:
- i2c_smbus_write_byte_data() and i2c_smbus_read_byte_data(), which
cause an emulated SMBUS transfer,
- i2c_master_send(), which causes an ordinary I2C transfer.
The Turris Omnia MCU LED controller is not semantically SMBUS, it
operates as a simple I2C bus. It does not implement any of the SMBUS
specific features, like PEC, or procedure calls, or anything. Moreover
the I2C controller driver also does not implement SMBUS, and so the
emulated SMBUS procedure from drivers/i2c/i2c-core-smbus.c is used for
the SMBUS calls, which gives an unnecessary overhead.
When I first wrote the driver, I was unaware of these facts, and I
simply used the first function that worked.
Drop the I2C SMBUS calls and instead use simple I2C transfers.
Fixes:
|
||
![]() |
7c977019c5 |
leds: lp55xx: Use gpiod_set_value_cansleep()
Use gpiod_set_value_cansleep in the init_device function. Without this change, the driver may print a warning if the LP55xx enable pin is connected to a GPIO chip which can sleep (e.g. a GPIO expander): WARNING: CPU: 0 PID: 2719 at drivers/gpio/gpiolib.c:3051 gpiod_set_value+0x64/0xbc Signed-off-by: Stefan Eichenberger <eichest@gmail.com> Link: https://lore.kernel.org/r/20230918143238.75600-1-eichest@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
e3c9d95213 |
leds: mt6370: Annotate struct mt6370_priv with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct mt6370_priv. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230915201051.never.429-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
476301c15d |
leds: mt6360: Annotate struct mt6360_priv with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct mt6360_priv. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230915201020.never.433-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
6061302092 |
leds: Convert all platform drivers to return void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). All platform drivers below drivers/leds/ unconditionally return zero in their remove callback and so can be converted trivially to the variant returning void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230917130947.1122198-1-u.kleine-koenig@pengutronix.de Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
eccc489ef6 |
leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Make simatic_ipc_leds_gpio_remove() return void instead of returning zero unconditionally. After that the three remove callbacks that use this function were trivial to convert to return void, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230916164516.1063380-1-u.kleine-koenig@pengutronix.de Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
0847c33baf |
leds: qcom-lpg: Annotate struct lpg_led with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct lpg_led. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230915201059.never.086-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
bcbadbb29c |
leds: lm3697: Annotate struct lm3697 with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct lm3697. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230915201010.never.399-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
52cd75108a |
leds: gpio: Annotate struct gpio_leds_priv with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct gpio_leds_priv. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230915201003.never.148-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
a29feca113 |
leds: el15203000: Annotate struct el15203000 with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct el15203000. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230915200955.never.871-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
679cec1809 |
leds: cr0014114: Annotate struct cr0014114 with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct cr0014114. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230915200948.never.728-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
ff861ca9f2 |
leds: aw200xx: Annotate struct aw200xx with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct aw200xx. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230915200938.never.767-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
a09af0551f |
leds: pca955x: Fix -Wvoid-pointer-to-enum-cast warning
When building with clang 18 I see the following warning: | drivers/leds/leds-pca955x.c:487:15: warning: cast to smaller integer | type 'enum pca955x_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] | 487 | chip_type = (enum pca955x_type)md; This is due to the fact that `md` is a void* while `enum pca995x_type` has the size of an int. Add uintptr_t cast to silence clang warning while also keeping enum cast for readability and consistency with other `chip_type` assignment just a few lines below: | chip_type = (enum pca955x_type)id->driver_data; Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://github.com/ClangBuiltLinux/linux/issues/1910 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230816-void-drivers-leds-leds-pca955x-v1-1-2967e4c1bdcc@google.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
![]() |
0bb80ecc33 | Linux 6.6-rc1 | ||
![]() |
1548b060d6 |
drm ci for 6.6-rc1
Add CI integration support files for drm subsystem to gitlab.freedesktop.org instance. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmTv5XMACgkQDHTzWXnE hr6xGg/+N2Eb3QN7nbhAtpL80Xy1mR4fSYz/ZC8yad+942Nmn9T35PgnrABj0a6+ drQJMqOay1dooe/KRKpLJGYIxCklQUpRn35jiW9KqYkUTwBS77wrGlMySKfzv6eL yl9Pl69xfQHm/cmigDWe0JavvpDrRnmxBuGrHSjVPHltWVcTDRTyMYpnh6xzZ8JQ zUpSLhDqkpNJ11072UxTkALwGMIanGOJAYHOoRkJi65BhRcK5QfzslXzpibf484t FlEh2I5XPS+GBYn84GIvujzn3Bic7Dz9By2z6qIeTX93W5csYnLmKqI0ErAvlGIz 9h6ELeVTnDc/OZa8FmPe4GIc08dKf5cpuEI5szJW30eRVtxI6zygOszHKJArrXkl JDRuuRXd/SegQvV8NeGaetjh+t53U8utXxPqS6gD50zb5TzYs2nkxOgNGnXjAUjY DtwvQDsIsL5tFWwaRd7p+Ph23v2F9T486RpCcFkZFPMSbxO8k2lkEyzKBFPruhgl aYiRtcCnNPajzjOU+Hhgw2ayfR3GN3FDcURLdrKFYnwVZynxpaZDPcMyVzOvYFOr aH4TfJcwsm/CFhm8Pq5GVgwWJsLPteZEHTq7pRzcjwbt2zs+bzbaCn3twVyxg5a2 R1vNtNI+UuvbEC6srBM/CTa2KpUtmg5dHWppdoboex7XhlF6j1g= =X1RZ -----END PGP SIGNATURE----- Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm Pull drm ci scripts from Dave Airlie: "This is a bunch of ci integration for the freedesktop gitlab instance where we currently do upstream userspace testing on diverse sets of GPU hardware. From my perspective I think it's an experiment worth going with and seeing how the benefits/noise playout keeping these files useful. Ideally I'd like to get this so we can do pre-merge testing on PRs eventually. Below is some info from danvet on why we've ended up making the decision and how we can roll it back if we decide it was a bad plan. Why in upstream? - like documentation, testcases, tools CI integration is one of these things where you can waste endless amounts of time if you accidentally have a version that doesn't match your source code - but also like the above, there's a balance, this is the initial cut of what we think makes sense to keep in sync vs out-of-tree, probably needs adjustment - gitlab supports out-of-repo gitlab integration and that's what's been used for the kernel in drm, but it results in per-driver fragmentation and lots of duplicated effort. the simple act of smashing an arbitrary winner into a topic branch already started surfacing patches on dri-devel and sparking good cross driver team discussions Why gitlab? - it's not any more shit than any of the other CI - drm userspace uses it extensively for everything in userspace, we have a lot of people and experience with this, including integration of hw testing labs - media userspace like gstreamer is also on gitlab.fd.o, and there's discussion to extend this to the media subsystem in some fashion Can this be shared? - there's definitely a pile of code that could move to scripts/ if other subsystem adopt ci integration in upstream kernel git. other bits are more drm/gpu specific like the igt-gpu-tests/tools integration - docker images can be run locally or in other CI runners Will we regret this? - it's all in one directory, intentionally, for easy deletion - probably 1-2 years in upstream to see whether this is worth it or a Big Mistake. that's roughly what it took to _really_ roll out solid CI in the bigger userspace projects we have on gitlab.fd.o like mesa3d" * tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm: drm: ci: docs: fix build warning - add missing escape drm: Add initial ci/ subdirectory |
||
![]() |
e56b2b6057 |
Fix preemption delays in the SGX code, remove unnecessarily UAPI-exported code,
fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit more conservative to fix kexec() lockups. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmT97boRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jObA//X7nug+d+IMLIs+c4579z4ZhkltMRxJVI Btf8sdHpwgTUtKaOLmJnGiJ7f0GK5NtoaNtGUJF28aQETVOhco0Fvg/R8k1FE2Tc CJqw6oy2FjVqD9qzZPCXh6QCvTtGjN5GF+xmoUbf7eZ9U8IVvOxBG+7yDMorQw3P zzjIccLLg/aDvNLN/yZD2oqw6UGHZuh/Qr/0Q4PkZ7zL+yWV8EC+HOx3rlQklq0x hh6YMwa4LGr3przUObHsfNS11EDzLDhg2WtTQMr12vlnpUB2eXnXWLklr6rpWjcz qJiMxkrEkygB7seXnuQ0b4KHN/17zdkJ+t6vZoznUTXs1ohIDLWdiNTSl03qCs9B V98a1x3MPT6aro9O/5ywyAJwPb0hvsg2S0ODFWab0Z3oRUbIG/k6dTEYlP7qZw8v EFMtLy6M2EILXetj8q2ZGcA0rKz7pj/z9SosWDzqNj76w7xGwDKrSWoKJckkCwG+ j+ycBuKfrpxVYOF4ywvONSf35QTIW8BR0sM9Lg1GZuwaeincFwLf0cmS4ljGRyZ1 Vsi0SfpIgVQkeY/17onTa1C5X6c2wIE9nq253M58Xnc9B2EWpYImr+4PVZk6s4GI GExvdPC/rIIwYa0LmvYTTlpHEd7f5qIAhfcEtMAuGSjVDLvmdDGFkaU7TgJ6Jcw2 D12wKSAAgPU= =S38E -----END PGP SIGNATURE----- Merge tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fix preemption delays in the SGX code, remove unnecessarily UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit more conservative to fix kexec() lockups" * tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Break up long non-preemptible delays in sgx_vepc_release() x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld x86/smp: Don't send INIT to non-present and non-booted CPUs |
||
![]() |
e79dbf03d8 |
Work around a firmware bug in the uncore PMU driver,
affecting certain Intel systems. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmT97GIRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iLjRAAjk67cOUubVYXYOwlI4/5c+XiMC1qcqv9 M0uK30h+EECqWdm5Waj4mjFJ3seWUPrNsmdY9L4a6Gd1+s6W10wIabCEJnDBcfj5 M4Nv7OBnbfKb2JGfUfgd0OSSoclxL/QJh5UXMI+vLPKS2hMC5wL3BdKsxwrmbT+y ZwilRbkHU0kSZpkkKE9yZNOcHhBMZ6LuQGlCAQ5k99Q8Z2KbxPa8T/8zx/RjYfuw 5WrE2gJJPXE/J/IHIvg7auhu2IcpzOmWPtb9J8MPExrUZLSQIYNhdqqyY9lvagKu OdYcotBEoZM2+MSXzVWSQPKVVKox03FDErwdGef/QLFmzzldFFGUjKSRBfpnMK9Q esjSiIGXlxh8fFcyCS/6FH48zA5y4BnBSzmPn3xt63VK0+EHPtUOUt8Xiug8DEYs O8hW+3SYmhr6seF9ioX0RCoqft8dQuNz07zZWfLu5Qc0Bl8aLBhwRoXsYKnKqems uqQ7bOb1FFwrS6AgebDhqHJUiw6WaeldsEolDyZzbKGJqFHJuTTFaECHApceLD7M V4ymgy6QoKeccctr8qnwzX/5xbwTx8fRfTIuL9ZR2KC0NJLF/UwIw+bEAq2vuv3A ROFYH+z1h4IvlCE3o3mRhGGYTxkdFw+BRXrWP690qxyRHBoHE+JwccSu36CKwBYS LiZn7CWuFtg= =Zq1S -----END PGP SIGNATURE----- Merge tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fix from Ingo Molnar: "Work around a firmware bug in the uncore PMU driver, affecting certain Intel systems" * tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Correct the number of CHAs on EMR |
||
![]() |
535a265d7f |
perf tools changes for v6.6:
perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees/branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys # perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation). - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZPfJZgAKCRCyPKLppCJ+ J1/eAP9lgtavD0V75wy1p5zyotkceOmPTkk1DYFVx2Euhxa/lAD/YW/JvuVSo0Gr HqJP52XaV0tF8gG+YxL+Lay/Ke0P5AQ= =d12c -----END PGP SIGNATURE----- Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees and branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation) - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform" * tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits) perf parse-events: Fix driver config term perf parse-events: Fixes relating to no_value terms perf parse-events: Fix propagation of term's no_value when cloning perf parse-events: Name the two term enums perf list: Don't print Unit for "default_core" perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake perf dlfilter: Avoid leak in v0 API test use of resolve_address() perf metric: Add #num_cpus_online literal perf pmu: Remove str from perf_pmu_alias perf parse-events: Make common term list to strbuf helper perf parse-events: Minor help message improvements perf pmu: Avoid uninitialized use of alias->str perf jevents: Use "default_core" for events with no Unit perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test perf test shell stat_bpf_counters: Fix test on Intel perf test shell record_bpf_filter: Skip 6.2 kernel libperf: Get rid of attr.id field perf tools: Convert to perf_record_header_attr_id() libperf: Add perf_record_header_attr_id() perf tools: Handle old data in PERF_RECORD_ATTR ... |
||
![]() |
fd3a5940e6 |
six smb3 client fixes, one fix for nls Kconfig, one minor spnego registry update
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmT8qQwACgkQiiy9cAdy T1Hjzgv/dCmqowHN9fI1gP/SpkbyZt0/GrlhpRMELQ2THAYuJmWQ9i/vR7VFMMv7 C7vfx3nYTQfQAcsshA+bfOkABr02A9HD5HuBEhWldEFQD/qIPrPMyU53DJ6m4QOb 81/8ox6XJMDNHWJUPJVfhAyHoKBxYyNcqqkITnBcSpqENbm7IZ8UhUJe1l75nkBi IYR28e4Aci5uGPuMB7NAuKmJM0IKi1ipMy4MCXkSD/vQZStz76mhzx200Wm6ObuX jqPzIb32simsVY7q/Hbkxt2MPDUbsn6kBhOSe8oJVxEgrMy56pZCOByPjc0ZFzE6 SziZ0JanrfjlGdBg5qjmcUamEMV44Oi1QQ6PpkHRA2zDyXMpv8ulwy/3Z40O7zbb WBBar0HsJE5osCL0jiwLbNorctEnmtSKWcyXOI924Bli4eesE/ojq2u4H4KrlXzA gDqPwAhhw/PrbuEmgRy9maYE8KwutZh2HCRvxgFB1NgbcNLvKgkQrly4QP29hKQy +HViqKAe =6QhY -----END PGP SIGNATURE----- Merge tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 Pull smb client fixes from Steve French: - six smb3 client fixes including ones to allow controlling smb3 directory caching timeout and limits, and one debugging improvement - one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option) - one minor spnego registry update * tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: spnego: add missing OID to oid registry smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU cifs: update internal module version number for cifs.ko smb3: allow controlling maximum number of cached directories smb3: add trace point for queryfs (statfs) nls: Hide new NLS_UCS2_UTILS smb3: allow controlling length of time directory entries are cached with dir leases smb: propagate error code of extract_sharename() |
||
![]() |
a3c57ab79a |
iov_iter: Kunit tests for page extraction
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that can't be extracted. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
2d71340ff1 |
iov_iter: Kunit tests for copying to/from an iterator
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that does nothing. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
f741bd7178 |
iov_iter: Fix iov_iter_extract_pages() with zero-sized entries
iov_iter_extract_pages() doesn't correctly handle skipping over initial
zero-length entries in ITER_KVEC and ITER_BVEC-type iterators.
The problem is that it accidentally reduces maxsize to 0 when it
skipping and thus runs to the end of the array and returns 0.
Fix this by sticking the calculated size-to-copy in a new variable
rather than back in maxsize.
Fixes:
|
||
![]() |
6b8bb5b8d9 |
sh updates for v6.6
- sh: push-switch: Reorder cleanup operations to avoid use-after-free bug - sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory() -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEYv+KdYTgKVaVRgAGdCY7N/W1+RMFAmT8zzIACgkQdCY7N/W1 +RNmHhAAxp8Hme2NiDlhoZkYj7I2WOzKcHmAxD2Ss+pLWwwoo9g1DgD/7aOuQu2m lkeI3+b1xaRQY1quSVvEzbuIzeKvBnzBT1utceITaH9AKJ8ffha4OHgO4LMBCH3A UGWPK/Yp+KuAPjFvmvY6jZvEluLWQWLAFc0Gxs8thxR09TjEhAhMCvK+YAYe6GVe uFhFklBNkCbcR/TelhFXPscrTUfQQtM1VjLNuj6Uh1G5gMDBPSiCJVGobnAtJOdq cVZG8oUAT6UUl6d6hDSucv0APS5bpWYJBfXBlwopOokA+uKZOAT75mf3WwOLperT l2HQzvFamP3p1thqrUyqsLq6i0DtP0Aaa+M5lHqM6yX+H0mEmBD6JXhCL/Ka7g2/ ezA5LZTmfOlcXb4zAmORZA7jp8/KH7q1bfGARV79jHOZ+unUQ4aHufo7+hw+WMO3 nwELWLBGuCn/Gd8bNTHSPHCY2hiWep4eFSqpevI+JQGJ8/Jvpo7WdllZ1BqZ9bpB yhABvKt+bBLfXElG7kH1ctBVaAubWai7bBvF/ASIC08dceP2SbYojj/msZOz0SsM gGUMrXM7jZ/jEsWuDd5uOFs+QupA1HhDtcF1KRFx6o4//EDOn2g/0rB+GVaSCcI0 mddhtvRWjYRO9po8IAnprH+qU67ZWy5ouZ6U0/i2FL8E/rNoHfk= =sNwf -----END PGP SIGNATURE----- Merge tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from Adrian Glaubitz: - Fix a use-after-free bug in the push-switch driver (Duoming Zhou) - Fix calls to dma_declare_coherent_memory() that incorrectly passed the buffer end address instead of the buffer size as the size parameter * tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: push-switch: Reorder cleanup operations to avoid use-after-free bug sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory() |
||
![]() |
1b37a0a2d4 |
RISC-V Patches for the 6.6 Merge Window, Part 2 (try 2)
* The kernel now dynamically probes for misaligned access speed, as opposed to relying on a table of known implementations. * Support for non-coherent devices on systems using the Andes AX45MP core, including the RZ/Five SoCs. * Support for the V extension in ptrace(), again. * Support for KASLR. * Support for the BPF prog pack allocator in RISC-V. * A handful of bug fixes and cleanups. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmT8eV0THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiQYTD/9V6asKMDdWUV+gti/gRvJsiYUjIrrK h4MB8hL3fHfCLBpTD4rU6K1Gx6hzPjGsxIuQyAq/hf752KB/9XUiIVziRBv2ZEBb GuTFCXfg0QXBUlxBZzFw5SKUuKXgRaMAQ14qjy3tfLk31YMQmBtAlEPdDM8mZOCQ zNI3bbdn6zASeaSMh7hwBoOJWP2ACoOEW7RcD44EDT8jb3YW5rEF86x0XtYLgJb6 xhaR4ieIdaOLxz2RbjXj0GcPIBfhTxZbwN3fLlD8PxuGqCKn5kN03bPPwP9tMTAc z02EgVcSDvJWpYikuuTkPMxpSi18OZPJ6eriwOv5ccP5NXQScO09iGo7IZEM7OzO j1IrIXyncU4BhxlpWombU454Va+ezUlfh9uh+MrJ+Bnve3T3S9ax7AV4S8vkJZlT bnmJVS/g7L/7nxTQdJ3zoAo2WzFQXL0C8SR5tGo/3aRk0uYoliHy/W419f55F9GZ rFcc+LMqai8N4bLN3whaK0NnuodNWHoNlpcd/5ncJwecswuDkah3LWcd4rwBrWhu 8RIkIfpdr/vTQjUVXVLeMHdKB+lST3iF1feMqJj0PfTyvTZi5yfSppjAfkAdVq+9 lHqAjsaGdiCrOtLxb0oBR2PTDQPAm2gN2meuSMommDQR6Vul8K5WcQml9Zx9QEWA eDXWYDZISKYJbA== =s89m -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - The kernel now dynamically probes for misaligned access speed, as opposed to relying on a table of known implementations. - Support for non-coherent devices on systems using the Andes AX45MP core, including the RZ/Five SoCs. - Support for the V extension in ptrace(), again. - Support for KASLR. - Support for the BPF prog pack allocator in RISC-V. - A handful of bug fixes and cleanups. * tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits) soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled bpf, riscv: use prog pack allocator in the BPF JIT riscv: implement a memset like function for text riscv: extend patch_text_nosync() for multiple pages bpf: make bpf_prog_pack allocator portable riscv: libstub: Implement KASLR by using generic functions libstub: Fix compilation warning for rv32 arm64: libstub: Move KASLR handling functions to kaslr.c riscv: Dump out kernel offset information on panic riscv: Introduce virtual kernel mapping KASLR RISC-V: Add ptrace support for vectors soc: renesas: Kconfig: Select the required configs for RZ/Five SoC cache: Add L2 cache management for Andes AX45MP RISC-V core dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller riscv: mm: dma-noncoherent: nonstandard cache operations support riscv: errata: Add Andes alternative ports riscv: asm: vendorid_list: Add Andes Technology to the vendors list ... |
||
![]() |
246f80a0b1 |
sh: push-switch: Reorder cleanup operations to avoid use-after-free bug
The original code puts flush_work() before timer_shutdown_sync()
in switch_drv_remove(). Although we use flush_work() to stop
the worker, it could be rescheduled in switch_timer(). As a result,
a use-after-free bug can occur. The details are shown below:
(cpu 0) | (cpu 1)
switch_drv_remove() |
flush_work() |
... | switch_timer // timer
| schedule_work(&psw->work)
timer_shutdown_sync() |
... | switch_work_handler // worker
kfree(psw) // free |
| psw->state = 0 // use
This patch puts timer_shutdown_sync() before flush_work() to
mitigate the bugs. As a result, the worker and timer will be
stopped safely before the deallocate operations.
Fixes:
|
||
![]() |
fb60211f37 |
sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()
In all these cases, the last argument to dma_declare_coherent_memory() is the buffer end address, but the expected value should be the size of the reserved region. Fixes: |
||
![]() |
2a5a4326e5 |
SCSI misc on 20230909
Mostly small stragglers that missed the initial merge. Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat due to the volatile qualifier removal, fnic due to unused function removal and sd.c has a lot of code shuffling to remove forward declarations). Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZPyD4CYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZWGAQDlh/3q 5YJp7f8sIqmgdOiKl3bln3API9Y0MPsC3z5TsAEAv9LYQZH3He4XvxMy/v5FioEs 8IWIoBsUZtcgoK6mI4w= =8Aj8 -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "Mostly small stragglers that missed the initial merge. Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat due to the volatile qualifier removal, fnic due to unused function removal and sd.c has a lot of code shuffling to remove forward declarations)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD scsi: mpt3sas: Remove volatile qualifier scsi: mpt3sas: Perform additional retries if doorbell read returns 0 scsi: libsas: Simplify sas_queue_reset() and remove unused code scsi: ufs: Fix the build for the old ARM OABI scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt() scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag() scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport" scsi: fnic: Replace sgreset tag with max_tag_id scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs() scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error scsi: smartpqi: Change driver version to 2.1.24-046 scsi: smartpqi: Enhance error messages scsi: smartpqi: Enhance controller offline notification scsi: smartpqi: Enhance shutdown notification scsi: smartpqi: Simplify lun_number assignment scsi: smartpqi: Rename pciinfo to pci_info scsi: smartpqi: Rename MACRO to clarify purpose scsi: smartpqi: Add abort handler ... |
||
![]() |
6b41fb277e |
Driver symbol lookup fix for 6.6-rc1
Here is one last fixup for your tree for 6.6-rc1. It resolves a problem with the way that symbol_get was changed in the module tree merge in your tree to fix up the DVB drivers which rely on this old api to attach new devices. As the changelog comment says: In commit |
||
![]() |
474197a4f7 |
dma-mapping fixes for Linux 6.6
- move a dma-debug call that prints a message out from a lock that's causing problems with the lock order in serial drivers (Sergey Senozhatsky) - fix the CONFIG_DMA_NUMA_CMA Kconfig entry to have the right dependency on not default to y (Christoph Hellwig) - move an ifdef a bit to remove a __maybe_unused that seems to trip up some sensitivities (Christoph Hellwig) - revert a bogus check in the CMA allocator (Zhenhua Huang) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmT8MJ8LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYOOyg/7BaZt4lih24cSFhXsU10wB49cKQuOngsT+4KFX7Eg 8LqdCK/L61M1VWm/1tcw6/XKK7oBDADIWnlutFTv1BHIaC0fjbFk0IpOQyWoXsYE vlCzm6Sh1rrryYK/dviLwC3+ccF33C5dzsZsKzeJ89v0cP//rENdOfXhwAIT2Wc7 FG/h0W7wWeQG4jHCz+DGhRp7X6r5urwW72KNap4BlBaDpZdAV9E5w1OeaplnENXt E7CK8rnHZz/AgH98LIMa929fgNhJ7Bec5mV9pItpBzYWAwL2iWk6k11FbAkxDiFQ MQ7gMnH5KRkCVpH/QILX1NU5ImsjdjyCUYn+2q8OJ5Y2C42K7V5ClspIgBCFk7XH AbCAGveoRUoQ3iCnQYZ0YPJOtyNSaUNB+q4NzwR/WFipiXGJBPflggI8gPzRiN8e 8SnKhduODklzLhOZZr7+nUEJpmwgR8aCkmhERZN/bw8iidBs/chiy9t1PfLmiOH9 R545BWEfsgpRikpEgb0HnuGD/zg26LcugLUilNbSZq0fzH4tkD5iCKKUitAITYLP ED0wDj9AdyQ98L6aSgAxc+9ip3eATFntM6hlg/16Ve4zdDTbFgucZpJhdSuVF8BI rq1VV3wztUm++zhkTFptK9eN2T+AQtpC+3XI6QyXpByADbX+m8GbQJm+r8V3hu5A X64= =AvYr -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - move a dma-debug call that prints a message out from a lock that's causing problems with the lock order in serial drivers (Sergey Senozhatsky) - fix the CONFIG_DMA_NUMA_CMA Kconfig entry to have the right dependency and not default to y (Christoph Hellwig) - move an ifdef a bit to remove a __maybe_unused that seems to trip up some sensitivities (Christoph Hellwig) - revert a bogus check in the CMA allocator (Zhenhua Huang) * tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping: Revert "dma-contiguous: check for memory region overlap" dma-pool: remove a __maybe_unused label in atomic_pool_expand dma-contiguous: fix the Kconfig entry for CONFIG_DMA_NUMA_CMA dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock |
||
![]() |
060249b5d3 |
pci-v6.6-fixes-1
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmT8goMUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vz2jxAAraKdqDFC7ARsslpG2KI4sUad/2S6 eMgEE4ud/yJzs8NbMKH0QZvnBo+TbTGoxakersX9MBU+FNSofll7BTdfURwV8pmx BhAycP9kFBljBFQAYEpxJ2pBIEqReq+58Fs9oHHgMg5WcJ9VvRecFnP6stXhH8Jd taFQ2vlYDMDFnF++nSIK9wvZzN7Ku+fng9ChdI2OZFqx8EX6XaDE3c/1LZP2vms7 SoaC8ZxI+66u1oo51XZz0QPWLVrKxaVRACtn02HbiQ7YLpfOK0zyPXUMwTpcOgng urwcd/pDZoOF8DPjhPd6UwJKGs15swupzNiyQKNSnReff8DpzA+SWVe3ntIX/NF4 AVscmLa/XntiiXHgeXtWXc6Ve7255eOQruy3tt0A5bmWGDWY1Ik+hpPC1yevZfYU 0DMrVZPNntSEmEKml4iPQptvEGAVcYFN0VCemcEunqcDFyUaCh7SkIoKL80rf/h8 bIbDHOGYYYmGH9AwOYgUcmwAYK154z99EvO45ptiXuC05wfw5X3JedO8S2YsK7Yx 6ZCzs/ZpvPpTxnvoDw59qVcZ1T6PR8BoExEYKUXuBfgYVivoGHHh/BNaRsKqc1F4 +FA/Yn2JrUoANNm1uyJv+z0zteXzOH/hIPxnPajH8Ojh2lCdniOBi8+SZgk7PUss k4CDTrVHH1eO73M= =MzOj -----END PGP SIGNATURE----- Merge tag 'pci-v6.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - Add PCI_DYNAMIC_OF_NODES dependency on OF_IRQ to fix sparc64 build error (Lizhi Hou) - After coalescing host bridge resources, free any released resources to avoid a leak (Ross Lagerwall) - Revert a quirk that prevented NVIDIA T4 GPUs from using Secondary Bus Reset. The quirk worked around an issue that we now think is related to the Root Port, not the GPU (Bjorn Helgaas) * tag 'pci-v6.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset" PCI: Free released resource after coalescing PCI: Fix CONFIG_PCI_DYNAMIC_OF_NODES kconfig dependencies |
||
![]() |
fa9d4bf5b7 |
Link toggling fixes and debugfs error path fixes
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoE9b9c3U2JxX98mqbmZLrHqL0iMFAmTspXgACgkQbmZLrHqL 0iOD1hAAjQfLo8AmAKN0xWhr7+8HQjdSHgkqnOgeySDvWu40aWlSRRQ6bsuXoQ9G TGNX6Emqsgc6CcZ63x5yeerLMudaaSliRSDdcN3HUTmnnqSl/mDteBIsYRpsjpA8 hl7qZU377N8WRTglQjvta62jVp/o67EJxQGqhQiI4Yi9GY0KLB8Pn6ta8A0S2x5A C8RHUv7O7006Ox64uYP9Woes469oltPvkU2RiDnGoaZ3055SFkoylB1yflpK74JM fipTM6Y4ciiEbEJT8H1gIYd8qVEDHn4r7QLA2m9oZo1/uhDErVCKMS7sOmHvphfP aBXpPv5H4f9wQ6MXuFlZWFmbQXzVdYcL6eje24rcYNSGNLbjl92FqmZoH8wU5MUB JXuQdJ6+eDMyue78n9XOurBbTVUSq+KIeSpWktheBujNiBEgQ08O4Nr8TBJsPttR vcBqX+QcK0ivTgtWRojVyd3rlJcyHFbhaOk4x+5Og1VlLyi+dkfbcOiKpaMTZyIs cw7aLhK4mlUfL26U/bPLSFo7PmWaNO/UaialtykqG+9mELW2WiobBKEHCXUw7xs2 TuFkRDv42w3DpKPm2cr93wbxbcoBFpOZMcX1CgYKBOGVon2UZDs26Jtvm8yj//Px nkqDRwYWFVJVF/3RIq0dGW24GbNH7Y5IK4OEqr+Cd71U7lyTjMA= =rOGo -----END PGP SIGNATURE----- Merge tag 'ntb-6.6' of https://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "Link toggling fixes and debugfs error path fixes" [ And for everybody like me who always have to remind themselves what the TLA of the day is, and what NTB stands for - it's a PCIe "Non-Transparent Bridge" thing - Linus ] * tag 'ntb-6.6' of https://github.com/jonmason/ntb: ntb: Check tx descriptors outstanding instead of head/tail for tx queue ntb: Fix calculation ntb_transport_tx_free_entry() ntb: Drop packets when qp link is down ntb: Clean up tx tail index on link down ntb: amd: Drop unnecessary error check for debugfs_create_dir NTB: ntb_tool: Switch to memdup_user_nul() helper dtivers: ntb: fix parameter check in perf_setup_dbgfs() ntb: Remove error checking for debugfs_create_dir() |
||
![]() |
5d153cd128 |
spnego: add missing OID to oid registry
Add missing OID to the registry. Some servers and clients (including Windows) now request "NEGOEX - SPNEGEO Extended Negotiation Security") See https://datatracker.ietf.org/doc/html/draft-zhu-negoex-02 Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
![]() |
86495af117 |
media: dvb: symbol fixup for dvb_attach()
In commit |
||
![]() |
6099776f9f |
one patch to remove unneded warning
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmT7eEwACgkQiiy9cAdy T1EY1Qv+OIgraDJ23wl4FX17dEQLKqcVH5wCWhU9IEq9oIhKSMngDE4kAKu/unEJ GOKy9QfY2eshPWHCoZjh9lI1Xg776nC3GeAtekOFHXX9FXRZfWP0+Sp6HRNk1TxD iTrRUDGnGA20QF7tgxNo5EJb2yvxBmEmhiSTwlFUuV+oOjvbQw0eB2EheEEzhPJF 7qrlvC0GvvgUOrVVg6YEMCNFb9bvrns06Rwrl3Hq86gaauXIg4pBIF/AHiwh7jCo +upXo1vgfWp29XMwX79LqCOx9u96q0i5AZonXTN2W/AxsgsWA6RQnGyZmL+Q/2/4 w4jN76NaLspoVE8grbzcSJq8b3Rlx2HUlzBaZgqAbuB8zx/59RXf559Aewt+Y9Pt anGsTTpp6a9nc9YYlAGSmaA97y5fnHO47sHpKHVhR9vKbQgvnqGzvmqgNUeRbDzb wgUjOma6SPfZL6JNqNb+SrktI410MjS11/+mP4NlTrVVomYyKZXslcvpnMuoiHMH U4RpYB84 =9Rd7 -----END PGP SIGNATURE----- Merge tag '6.6-rc-ksmbd' of git://git.samba.org/ksmbd Pull smb server update from Steve French: "After two years, many fixes and much testing, ksmbd is no longer experimental" * tag '6.6-rc-ksmbd' of git://git.samba.org/ksmbd: ksmbd: remove experimental warning |
||
![]() |
3095dd99dd |
XArray/IDA updates for 6.6
- Fix a bug encountered by people using bittorrent where they'd get NULL pointer dereferences on page cache lookups when using XFS - Two documentation fixes -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmT7XLYACgkQDpNsjXcp gj6qrAf+LiAs3dUELOjrqaQQbbNGp4na+YwJCiezuvwZn8P+ieJpt6QCEDHEb1jH LCOjr0GFMhHnAWp9Q0Qay4IXoKk8DPkA/avSaZgsl5blmMyNqFMgHklU7mjRvhCG ayb/NeZYwrJhA9NyueXYuH3h7QDryxyIN3TZS1/7z13YrohMIQeu3q7X/ZBMh7NS uPd7vmDj8TnZ/agQzplQ4XDov9lrzkUXDJqpMvn/Gbr4K7y66UZa3SLxi1JPrnah ffDvBlK2OImNBoaADfiRImWc7QlXVkF/B08xUcJ6tXAeO6xJDykkie+gjsF2S040 YP2YIG+IWi47zqa25EuxFRtavwUh6w== =4GKy -----END PGP SIGNATURE----- Merge tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray Pull xarray fixes from Matthew Wilcox: - Fix a bug encountered by people using bittorrent where they'd get NULL pointer dereferences on page cache lookups when using XFS - Two documentation fixes * tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray: idr: fix param name in idr_alloc_cyclic() doc xarray: Document necessary flag in alloc functions XArray: Do not return sibling entries from xa_load() |
||
![]() |
7402e635ed |
block-6.6-2023-09-08
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmT7NSUQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpuIuEACxQj0JjIVwgp8VlUcMAEFap7GH940qs8is tnRrGS48G/z3WZ0zizGQ1hF2m9oOJ1NwZ1bBrGJlVBP8KSgyR9IxI6WVt0JBZgg8 DNQt+v5FoX4v5ZbFr/NTqz/6YnPWVwyTkJs4JIi9YLmpKkd58N+51n3wl56xyrp7 8OcjHPH1ZI0qGar2poPXI7EKaweSzJW7nr3/cHujYoCfAGn7eZbHNgY0wdAtWdhM oGFABgMKTFKA0rCSaP8uo7GIqov+KXvFUNOuC6eNjtaUvXMecPLEJxvDhhi52fml LEH1a9bmtazu6bufrbI2D4SmXLNBcqnQw5d/1pn9oRO/UU6AAi6E7I/L1iodKWav bkr2i+YMnhUqVDFRwy+j78bcGRlLPWupvj68RdpvAvzhdW/85p9nH66CJfTnjQ3q xJJKoUREd/8C6ktm5xHYyETxcL5q6Vdz1w5GmsCyOWWpsXsEbh0GHn6pRDkLWJf4 OQhO4CbxIARGE5NRK8MYl/J/581yS1cIdGZAg7hsVHzTGDSt3h/Hlh6ONpWCcvXD SJI39W83oBSOnsbRG4FU6Bnt/WHTD0yi07cr867l9HEq63JOK/OduMjXA/tdRfwP fZU3RfFYcS8+h9UHgrSgvCk03fCjq1HsWCDfpc6sUuRG1fH6jSNFdkCKqhCoU9Py K2IKi1IE0Q== =4SLW -----END PGP SIGNATURE----- Merge tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux Pull block fixes from Jens Axboe: - Fix null_blk polled IO timeout handling (Chengming) - Regression fix for swapped arguments in drbd bvec_set_page() (Christoph) - String length handling fix for s390 dasd (Heiko) - Fixes for blk-throttle accounting (Yu) - Fix page pinning issue for same page segments (Christoph) - Remove redundant file_remove_privs() call (Christoph) - Fix a regression in partition handling for devices not supporting partitions (Li) * tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux: drbd: swap bvec_set_page len and offset block: fix pin count management when merging same-page segments null_blk: fix poll request timeout handling s390/dasd: fix string length handling block: don't add or resize partition on the disk with GENHD_FL_NO_PART block: remove the call to file_remove_privs in blkdev_write_iter blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice() blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice() blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative blk-throttle: print signed value 'carryover_bytes/ios' for user |
||
![]() |
7ccc3ebf0c |
io_uring-6.6-2023-09-08
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmT7NXsQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgphevEACwpgak3KV+zE+u/2g8rsjRu9FDkgi9hW+7 RKbwPtgTN3R3/z+eGq57gWW3aSJx0Mqaxf/mtEqf+K+yxK3FbDDKAkkwMG0S/TGT FT+beCeJHiA9tTruoW1ipGh7gxS0D3JWwPRl5i7+rtagzdbOSYWmsrNPVXl3uVee x6sORlZ3Ye2VRd0m+3fQ7nWw+epMKebMrlpmWC7og0mdt/zhF+q6zgAV8tdEYe7E VQ8yrWa9LyYw07a+M2kra2+IZzSWYZE7qZE1OZcwbI9ARvqNkXyslqXfW0gVrDml lfoUnwqsRI45RfTOTao6lAzc5QZHTlrl1Mqg79139grDaEM/bCx/kQq2ZUG03Tcy FUgKNrz6E/te5u1ar8E8ppXEAmjjAsKiYZsT+d5nHv7xPV9F15Ryu+Mr9sFAiHXw hMyInmBJ6JcQx9BYpvxTMi7N4Mfiw2Z9GTE2yhhVPvEAG418+YYa7CSNdXVSy/M2 QuAQEc+K1CcVhmgNZbSe2FnSCve1khHURT0C3PYI0u1VHpZmkzcSY5utdKuqeRDw SqHk/XO3bBWW13UuLBnIB8+jk1AGKDc0vJQrdzxxxSYHc7uTx30QHYQMdA90Bqyx 2z/lg7IwfITgFkRO30AGXbe2NN4YnbseJ5wyfHvlN/WcHrDo9zbZUt6gReVCcOWA /NBftGe8WA== =eHn2 -----END PGP SIGNATURE----- Merge tag 'io_uring-6.6-2023-09-08' of git://git.kernel.dk/linux Pull io_uring fixes from Jens Axboe: "A few fixes that should go into the 6.6-rc merge window: - Fix for a regression this merge window caused by the SQPOLL affinity patch, where we can race with SQPOLL thread shutdown and cause an oops when trying to set affinity (Gabriel) - Fix for a regression this merge window where fdinfo reading with for a ring setup with IORING_SETUP_NO_SQARRAY will attempt to deference the non-existing SQ ring array (me) - Add the patch that allows more finegrained control over who can use io_uring (Matteo) - Locking fix for a regression added this merge window for IOPOLL overflow (Pavel) - IOPOLL fix for stable, breaking our loop if helper threads are exiting (Pavel) Also had a fix for unreaped iopoll requests from io-wq from Ming, but we found an issue with that and hence it got reverted. Will get this sorted for a future rc" * tag 'io_uring-6.6-2023-09-08' of git://git.kernel.dk/linux: Revert "io_uring: fix IO hang in io_wq_put_and_exit from do_exit()" io_uring: fix unprotected iopoll overflow io_uring: break out of iowq iopoll on teardown io_uring: add a sysctl to disable io_uring system-wide io_uring/fdinfo: only print ->sq_array[] if it's there io_uring: fix IO hang in io_wq_put_and_exit from do_exit() io_uring: Don't set affinity on a dying sqpoll thread |
||
![]() |
702c390bc8 |
smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU
There was a minor typo in the define for SMB2_GLOBAL_CAP_LARGE_MTU 0X00000004 instead of 0x00000004 make it consistent Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
![]() |
32bf43e4ef |
Additional thermal control update for 6.6-rc1
Eliminate an obsolete thermal zone registration function. -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmT7ciwSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRx7t4P/2inGJikCy2sjJTkQanu9+PBk4IDQDHD lrAQaSk9Ux+8epKq7AwlPmwDUuGJOetUQUbftBmTv6BS0AJuXTz5Wqcb/OCzteqv 9FbucDj09A5Vz4+KSAsu4Mt+lj4ziLlbkhlhU+pd4WPQQjrYBh7kyh3X2bPV8RoQ DCNKryLM2P+p2oswbIVnTB3zf29lyLFAUXPuKRvBqlFqTCTpjo4lEn9SCuwYSfo0 UiyFWnlVjgBh5r9pFu/5iYSnbrBCcbpt0BJfuZMXiJt4HhiX8iNyrbvdGexQr2g3 2hwD59R3ImK8ARl7EMH+nxDiDShAINrEkDSRG5a8nvHVJ56u1X7m4YTOH9Bomc45 hD1shf+0M5W29FCZkaw1FF3KkiuTIKEFTJIf1kvIf4XLKYgvkkDAIj1BlGRd07PR EtKKR0W+FJWUUkEMA9eJJ/DoVxq+m6QWaGtvPb0/XQw/plITy5+HcjSmzUcP/4AM MPIQXHO7dhhA9nJ3z6lrnqfhUegdetfpif5xm6TAh8mYGM6dYGFjpMcjrLYO6Nbg eGCcqTfvocLg5Rt9fdgWYDtmIGUbmQqYUna6lHo86rQF4BaWz8DFCIRmCefQPirs CBCA+n/k9M9U5jTE+k8HxYTvpIgtIeHc1HWygF3+UxMGVn0vFLynbzKz6jGnWl85 GwnZIh8prUSK =MWTQ -----END PGP SIGNATURE----- Merge tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more thermal control updates from Rafael Wysocki: "Eliminate an obsolete thermal zone registration function" * tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Drop thermal_zone_device_register() thermal: Use thermal_tripless_zone_device_register() thermal: core: Add function for registering tripless thermal zones thermal: core: Clean up headers of thermal zone registration functions |
||
![]() |
fd88c59e79 |
Power management fix for 6.6-rc1
Fix an Intel RAPL power capping driver regression introduced during the 6.5 development cycle (Srinivas Pandruvada). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmT7cZ4SHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxnGMP/2z7SYBn8wBSmweORYVmi7PeWcOv4kuI 4TALaieUTNQHhMFMk4tvjkp8wy1zXSjfxobLbnw1Ak0d3QOggxb/AMHF0RHKCE44 /gUKlPpN4hlajjMTDARwBfrQXDY3W+rg/9x3MZlUMXZpLLTo3EO0XWlQzqgqT+h7 nbEXtZa0zFaZVjOb/lKoNUk5xVcgLg3wuKn5hZiKg/wCMDW+MYvNAFQfGP6i2jaI NJsnswWEZARvTWvrduvE4BfxwH0h4t+82rpp31ARWGGir1xA02ysk1iKjoli3Tf4 ESW80VMIRGaSl4gxuAqonhlx45/daK7ySJABQR3DFSb7ol+ytoITDP3FP4lp4r/0 AjgwfguTdOeg8mzn5NC0LyQJu2JHP8hHOLBzN0Y1S1MLN17nyX7HvakOgFuRuZud NAlJ6kn+8ofxMMo/Dt6vsZ4059cVZ4h7j6rXqoeSKplsLphwBjDGE2s/osug9kXU g7AKy1E9f+iCrc3OwOE7CGzWXZcoRpqE45oqSiMokoZLdP8u80sY2u+912w7yaXd /+TjpURs4l3DwzQH0uoIJhWz+OeL6Nwd1hOdrbP1YnOlgPMdvqGIgh2RIDtRJOZP EpAdOt0OR6qUyyggkkVDkAW7PLRfxwSxYS0G+9aK3j5qGgRC0GSKwoHqPDcCtC8x P3AGg6Gfjdy7 =XadJ -----END PGP SIGNATURE----- Merge tag 'pm-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix an Intel RAPL power capping driver regression introduced during the 6.5 development cycle (Srinivas Pandruvada)" * tag 'pm-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: intel_rapl: Fix invalid setting of Power Limit 4 |
||
![]() |
d30c0d326b |
gpio fixes for v6.6-rc1
- fix a regression in irqchip setup in gpio-zynq -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmT67tYACgkQEacuoBRx 13KBkhAAiRtDo0WFHuCkHIEFxUr/0VdVamSDdYr0pSIkvN+L1ELogIL3SEFOWbYu vkJDxB8ej9HVsORux9mKv0F3QnJhxdRKkv7qpRm+XLwAQClgE33Y5J8TLE3ggLhm ztprTbktnrwjLyMKhcs7X0uOwmuXf7MRSFsfKUHdp8/EmgSoI57U8Ecl3zPdXGbh nfKphtwMaHHrQ0hnAfe8ZVRGkqfc9ZdSWh1fcxlKliabVRCFj4IEUQyx8J8zQX/t 7lD0yg9eGzSZIGrovfGTnU8rCNDNITRn9e798ohBiJZgTBmXClBKTX+TLt7XCr/I lKic3TvwlyUKL29VhMtFSDdrVcnbEPlT1DflavDA5OCWthmNHUhjVBHYD1FSqN+a Zu+3eMTmn2oeZQKZjC+z+z8Y2o9Tw4nkT/SkoxmA7FyAy8SSCbUtz1/FjOjGpihp niPi+99gc5OKCH0EM9zf4ZbRI5LUviai6UPpa5YXH8qUsw5lq6jUE2oyv/SQLS/b OCsJ+cVzMJDWdWkmW7RdJHzdTy8l5Q3A0AkfV8H5m7ahp4aEnP76b8IrqH8+F6Ot KWhZfRyOBFqbJGbaGWx+HpE6N8qH+4LZ6VQmZ9sEpe8T99p7JZqGT0Gms1YR0Aa+ hBg/mGKqEz0F1qdgUqm+MvKUX9hs/o2ML6bgzP7QWV/D5Htk318= =VqOd -----END PGP SIGNATURE----- Merge tag 'gpio-fixes-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix a regression in irqchip setup in gpio-zynq * tag 'gpio-fixes-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: zynq: restore zynq_gpio_irq_reqres/zynq_gpio_irq_relres callbacks |
||
![]() |
5260bd6d36 |
Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"
This reverts commit |
||
![]() |
a3d231e44a |
sound fixes for 6.6-rc1
A collection of fixes for 6.6-rc1. All small and easy ones. - The corrections of the previous PCM iov_iter transitions - Regression fixes in MIDI 2.0 / USB changes - Various ASoC codec fixes for Cirrus, Realtek, WCD - ASoC AMD quirks and ASoC Intel AVS driver workaround -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmT5xkIOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE9k8RAAkgeTtv8W3YWKvkMMf7kMEP4Go8COJ4pLqY4A zPfJp//tDSKiOLPm8XzYYQQddTlcVc6iNbV/3Enw3Ov9xvnQxAk+N+5ciF+s27q5 KyxzKZneEOSJSCPHPcbcI0LgqpSH/b71S8NhGL48DXxCd+GHyHSind8hel6xi+u4 dQIL9cQOp1HGmKreMrHvsvY4ruG5SrnQ+GXjcnkmdmMWP17xtubAXcRWvZs/PMl4 dg5HNUDy/KuRbHnxTAee7tuGZyG10sLkS4UfP+J4gKGdOKQvltrQ7dTyG3dCKtRl Ezq0++IY7asMAdBu39IDJdC7XFr4jNSmeZbqcmhX8PTggIUJuyHzfnC9pAadkXOn B11ZJUL2I6QYI6UZyyvWTc2HD4+rxOvl6IkFkDgaiOD3chPTqhAwAhDUeFICSuBi BPJ4fG2r0iEFP92dTli9Q2gY2fXkE24ndpwP+zWbt0zO0/nQPh0XfWO3x6Vt/ml1 NNNj12qx6w6I4k8kx+mj4zFewz7x8dTIdXLukYAPk5tlagXpora9u1tt0ZT72T22 +wintcjfIp6agKxcWVmKVXi2PFdQmrwpUe5lW5EPKhEXNcrQaTBOKb9MYvFrCTz3 6olHbocegqolNnTJ/uSRTBD0E5jkwpdbc3MbSKrxUpcyTyKZmPDpd9JuPLLJHPfn BkFdx5U= =txoJ -----END PGP SIGNATURE----- Merge tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of fixes for 6.6-rc1. All small and easy ones. - The corrections of the previous PCM iov_iter transitions - Regression fixes in MIDI 2.0 / USB changes - Various ASoC codec fixes for Cirrus, Realtek, WCD - ASoC AMD quirks and ASoC Intel AVS driver workaround" * tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek - ALC287 I2S speaker platform support ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL ASoC: Intel: avs: Provide support for fallback topology ALSA: seq: Fix snd_seq_expand_var_event() call to user-space ALSA: usb-audio: Fix potential memory leaks at error path for UMP open ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs. ASoC: rt5645: NULL pointer access when removing jack ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E) MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS ALSA: sb: Fix wrong argument in commented code ALSA: pcm: Fix error checks of default read/write copy ops ASoC: Name iov_iter argument as iterator instead of buffer ASoC: dmaengine: Drop unused iov_iter for process callback ALSA: hda/tas2781: Use standard clamp() macro ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe() ASoC: cs35l45: Rename DACPCM1 Source control ASoC: cs35l45: Fix "Dead assigment" warning ASoC: cs35l45: Add support for Chip ID 0x35A460 ... |
||
![]() |
ca9c7abf95 |
arm64 fixes for -rc1
- Fix an incorrect mask in the CXL PMU driver - Fix a regression in early parsing of the kernel command line - Fix an IP checksum OoB access reported by syzbot -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmT6/MgQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNABnB/0XsQEfl+cjE1BJnYuwiZyMbraSAL2i5oy9 3LUKHOQblZpSnf+OCxr2otBoRVpM2hmXcGQymUzcI8SmLtgNt8RFmwVtyuj3X6ZX JTrdxLIMK2TQi/dqQ9ssJCejW4Y2fXDfJ2hZSpTG40TVyU8mL9BzI61HGQYcMA4T 0HFzvfDFoDDwslJgeKyVnaEU03o81HaRTOgL4OHAT9AhWlIzaWmVtJf+y/metd7U ccE1yA0LG9teAgN3wC2yWWR4iBG0/Fe1UHV8ouvtXXAuLLySIObYKSa3hhOWz5N0 QDNQH12El+I7pKoA6N/D8orgXVk9xt3Q+9DSI0wcyGn+HsbLNprC =9Une -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main one is a fix for a broken strscpy() conversion that landed in the merge window and broke early parsing of the kernel command line. - Fix an incorrect mask in the CXL PMU driver - Fix a regression in early parsing of the kernel command line - Fix an IP checksum OoB access reported by syzbot" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: csum: Fix OoB access in IP checksum code for negative lengths arm64/sysreg: Fix broken strncpy() -> strscpy() conversion perf: CXL: fix mismatched number of counters mask |
||
![]() |
12952b6bbd |
LoongArch changes for v6.6
1, Allow usage of LSX/LASX in the kernel; 2, Add SIMD-optimized RAID5/RAID6 routines; 3, Add Loongson Binary Translation (LBT) extension support; 4, Add basic KGDB & KDB support; 5, Add building with kcov coverage; 6, Add KFENCE (Kernel Electric-Fence) support; 7, Add KASAN (Kernel Address Sanitizer) support; 8, Some bug fixes and other small changes; 9, Update the default config file. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmT5TfMWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImeqd3EACjqCaHNlp33kwufSPpGuQw9a8I F7JW1KzBOoWELch5nFRjfQClROBWRmM4jN5YnxENBQ5K2F1K6gfxdkfjew+KV2mn ki9ByamCfFVJDZXo9wavUD2LBrVakEFmLT+SyXBxdWwJ3fDivHjF6A0qs9ltp7dq Bttq4bkw1mZsU6MnViRwPKVROtNUVrd9mwYSTq0iXviVEbWhPHQQTxRizNra9Z6X 7XWxO0ODHl0WVvdOJU+F16mBRS3Bs1g/HHAIDc41yrYEHFFOeFCEUAQSF/4Nj5wj BAfAB8WOa9+vPH8fTnrpCt2RtGJmkz71TM49DdXB7jpGaWIyc4WDi9MXeeBiJ0wE vQg8IECc9POC1sH4/6BMwq2qkrWRj2PYFYof0fP66iWNjmodtNUf7GOVHy8MTQan xHWizJFAdY/u/bwbF9tRQ+EVeot/844CkjtZxkgTfV8shN6kCMEVAamwBItZ7TXN g/oc1ORM6nsKHBDQF3r2LSY0Gbf3OSfMJVL8SLEQ9hAhgGhotmJ36B4bdvyO7T0Q gNn//U+p4IIMFRKRxreEz9P0KjTOJrHAAxNzu1oZebhGZd5WI+i0PHYkkBDKZTXc 7qaEdM2cX8Wd0ePIXOHQnSItwYO7ilrviHyeCM8wd/g2/W/00jvnpF3J+2rk7eJO rcfAr8+V5ylYBQzp6Q== =NXy2 -----END PGP SIGNATURE----- Merge tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Allow usage of LSX/LASX in the kernel, and use them for SIMD-optimized RAID5/RAID6 routines - Add Loongson Binary Translation (LBT) extension support - Add basic KGDB & KDB support - Add building with kcov coverage - Add KFENCE (Kernel Electric-Fence) support - Add KASAN (Kernel Address Sanitizer) support - Some bug fixes and other small changes - Update the default config file * tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits) LoongArch: Update Loongson-3 default config file LoongArch: Add KASAN (Kernel Address Sanitizer) support LoongArch: Simplify the processing of jumping new kernel for KASLR kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping LoongArch: Add KFENCE (Kernel Electric-Fence) support LoongArch: Get partial stack information when providing regs parameter LoongArch: mm: Add page table mapped mode support for virt_to_page() kfence: Defer the assignment of the local variable addr LoongArch: Allow building with kcov coverage LoongArch: Provide kaslr_offset() to get kernel offset LoongArch: Add basic KGDB & KDB support LoongArch: Add Loongson Binary Translation (LBT) extension support raid6: Add LoongArch SIMD recovery implementation raid6: Add LoongArch SIMD syndrome calculation LoongArch: Add SIMD-optimized XOR routines LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Define symbol 'fault' as a local label in fpu.S LoongArch: Adjust {copy, clear}_user exception handler behavior LoongArch: Use static defined zero page rather than allocated ... |
||
![]() |
01a46efcd8 |
printk fixup for 6.6
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmT6xsgACgkQUqAMR0iA lPIpeA/+P8Jq25Hptd+Zh5XxkNO0lHKt8o9qZxgLwyA0Mh1YWLCTrmliqeK6jTWy CrKXkeyZmOQxzTFrflEN9OVQ/NnIBZBdiT6TWl64pI87pc+ElS+awC1BxS9gKDRC vhhwiMFWHt4DWlVhjKA+ARShYI/uI5+b/Ewlmg4ZeksWxWcFfnoZb0BCkQKGZcN+ 9G1C1mPtxV4lT1FJAglkgx3hF3+BcpX9EEVYdjdpQbD9J0jmlTP08/w+yyMvTzjs BVRPtcPeq0eb5iFp06SJKqa4377j6N9KMKtZG5IjzbkU/N6u7C4hXYxiGM/nOmyC 022/ZuFP6uwoeOiWBfuPJK9cadsomMbqeSJxC8wh/eLRqgTKU7N6wt8ybSSNynrC oMzdEI+ovjYIVrb13ZFDE+YFsXCzNhw1xNMmxdJMGQeeFNVkjK5MV1yaGdisffgj ps3eJbdaklFgU1m2GUkoVKglLeiYsihyvnSDZuxgfe+12GPReE0eTjvyj8gRUOd3 DLd1GPI7gmUv0c3k9VHyLu/ATrlBB9BvZ4cT2+anrC4Trf8Al2E8xgkzhYceqMOj 6XZFoGUGW+nhxU0vGy1psYCyw1k4L71vcT/WJD9ul+6RoHvwAnbDhmfu00W4LJ7C YwMheIc+00v4ofu/oXt32DhVFuAy06VdGiC4LYwWKkaPJELatPA= =bhor -----END PGP SIGNATURE----- Merge tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fix from Petr Mladek: - Revert exporting symbols needed for dumping the raw printk buffer in panic(). I pushed the export prematurely before the user was ready for merging into the mainline. * tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: Revert "printk: export symbols for debug modules" |