- New board support: LX2160A based BlueBox3, S32G2 EVB and RDB2 boards.
- Quite some updates on imx8mq-librem5 board: delay the startup of the
SDIO, add power sequencing for M.2 cards, add wifi regulator, add
panel reset GPIO, fix led_r and led_g pinctrl, etc.
- Fix the SPI chipselect polarity for a couple of i.MX8MM boards.
- Add GPU nodes for i.MX8MM 2D and 3D core.
- Add VPU and DISP blk-ctrl devices for i.MX8MM.
- A series from Michael Walle to LS1028A device trees and add GPU
support.
- Random and small updates on various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFq1WAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5d6Qf8C9tNUuEUzyFvdoT3LCXpDDu3S7d+
h338KpG8wDiPE+NDwdLy6DDRfzkADG6GHb01VXX9d4jNbCnJ4JD91RaMfnaWgB0u
F8bIE1da4Sf3gGqIQjkAoybZpS2ptELwvOtFfooyjdl/b6x5+9d37jkbCnfYDltM
a6GITAXlwm+T2B3uLY0efuPvqONhPzp35M2wUy5WdR0h/I/CjeRu8h413gqmMHeR
vLjT5kXoBUzOhCe9UNKkCw83NCGwY45VPlFcMufoKBcxZyvhh1ejJfde7ixegC/a
c/kaeJ96xz/Cf/bkoB+IDWzzZtHyXhXjopayANvGroGgPLGmZ+evrmPjyw==
=jwqD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8EVG
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree changes for 5.16:
- New board support: LX2160A based BlueBox3, S32G2 EVB and RDB2 boards.
- Quite some updates on imx8mq-librem5 board: delay the startup of the
SDIO, add power sequencing for M.2 cards, add wifi regulator, add
panel reset GPIO, fix led_r and led_g pinctrl, etc.
- Fix the SPI chipselect polarity for a couple of i.MX8MM boards.
- Add GPU nodes for i.MX8MM 2D and 3D core.
- Add VPU and DISP blk-ctrl devices for i.MX8MM.
- A series from Michael Walle to LS1028A device trees and add GPU
support.
- Random and small updates on various boards.
* tag 'imx-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card
arm64: dts: imx8mm-venice-gw7901.dts: disable pgc_gpumix
arm64: dts: imx8mq-librem5: set debounce interval of volume buttons to 50ms
arm64: dts: imx8mq-librem5: Limit the max sdio frequency
arm64: dts: imx8mq-librem5: add power sequencing for M.2 cards
arm64: dts: imx8mq-librem5: delay the startup of the SDIO
arm64: dts: imx8mq-librem5: wire up the wifi regulator
arm64: dts: imx8mq-librem5: Fix led_r and led_g pinctrl assignments
arm64: dts: imx8mq-librem5: add reset gpio to mantix panel description
arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY
arm64: dts: imx8mm: add DISP blk-ctrl
arm64: dts: imx8mm: add VPU blk-ctrl
arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core
arm64: dts: imx8mm: put USB controllers into power-domains
arm64: dts: imx8mm: add GPC node
arm64: dts: ls1028a: mark internal links between Felix and ENETC as capable of flow control
arm64: dts: freescale: Fix 'interrupt-map' parent address cells
arm64: dts: ls1028a: use phy-mode instead of phy-connection-type
arm64: dts: ls1028a: move PHY nodes to MDIO controller
arm64: dts: ls1028a: disable usb controller by default
...
Link: https://lore.kernel.org/r/20211016140138.1603-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFq0UoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4doggAu5reFlP/kBlBoQcqVZTZdeP+bQ14
lQVrp8qj6+Z6Im2BvXF/PbeyadFY2dTzTxIc3+LbA3dne4ukiO/Ihfl1Mv1EdWUr
6pdIEIFom97jh7TDyayDnCrJFNIdIetZGAwntv/CNL465YxptK/7GVksz3WBukYl
GAug+1c5U9V8Yd+YCSYUHNVviooeXMU2OjLJzy4wq1nm231mHoI3MsoLUlNNWlA8
qjHNYor5CPBkB7Djf6CVNjTmrCK4VcCMQs7AlYF3tFi9Dq0niyTD6Jsj2INeP4qA
jvs8wTGfEAltleCQsIuLeiCstWcQCCCAlGziskyvFOmRQTOqIuKFqkrNYA==
=iChy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NS3u
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.16:
- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.
* tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (42 commits)
ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
ARM: dts: ls1021a: move thermal-zones node out of soc/
ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node
ARM: dts: ls1021a-qds: change fpga to simple-mfd device
ARM: dts: ls1021a: add #power-domain-cells for power-controller node
ARM: dts: ls1021a: add #dma-cells to qdma node
ARM: dts: ls1021a: fix memory node for schema check
ARM: dts: ls1021a: remove regulators simple-bus
ARM: dts: ls1021a: disable ifc node by default
ARM: dts: ls1021a: breakup long values in thermal node
ARM: dts: ls1021a: fix board compatible to follow binding schema
ARM: dts: ls1021a: update pcie nodes for dt-schema check
ARM: dts: ls1021a-qds: Add node for QSPI flash
ARM: dts: ls1021a: change to use SPDX identifiers
ARM: dts: ls1021a: change dma channels order to match schema
ARM: dts: ls1021a: remove clock-names property for i2c nodes
ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties
ARM: dts: imx6: phytec: Add gpio pinctrl for i2c bus recovery
ARM: dts: imx6: skov: provide panel support for lt2 variants
ARM: dts: imx6qdl-apalis: Fix typo in ADC comment
...
Link: https://lore.kernel.org/r/20211016140138.1603-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for Globalscale MOCHAbin an Armada 7040 based development
board.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYWmsaQAKCRALBhiOFHI7
1UmFAJsGy5LRShEEpkTrfz5hirWav/xfkACeNa2V2tkHkHxxH4DLCUvAz/rG31U=
=Kzc3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=k+Xn
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.16 (part 1)
Add support for Globalscale MOCHAbin an Armada 7040 based development
board.
* tag 'mvebu-dt64-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: add Globalscale MOCHAbin
Link: https://lore.kernel.org/r/877deemefy.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Gemini PCI 'interrupt-map' does not vary by board, so let's move
the definition to a common location. This avoids having incomplete
interrupt properties (i.e. #interrupt-cells without interrupt-map).
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move the PCI 'interrupt-map-mask' and '#interrupt-cells' properties
alongside the 'interrupt-map' property in each board dts. This avoids
having incomplete set of interrupt properties which may fail validation.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Highlights:
----------
- MPU:
- ST boards:
- Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
with 512 MB of DDR3. Several connections are available on this
board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in
this tag.
- Change IRQ level for STUSB1600 on DKx boards.
- Fix SAI subclocks range.
- Add ck_usb0_48m clock in USB OHCI node device to match with
STM32MP15 datasheet.
- DH boards:
- Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
- Fix SAI pin muxing.
- Odyssey:
- Set DCMI pins.
-----BEGIN PGP SIGNATURE-----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=zn1y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=X4fu
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.16, round 1
Highlights:
----------
- MPU:
- ST boards:
- Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
with 512 MB of DDR3. Several connections are available on this
board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in
this tag.
- Change IRQ level for STUSB1600 on DKx boards.
- Fix SAI subclocks range.
- Add ck_usb0_48m clock in USB OHCI node device to match with
STM32MP15 datasheet.
- DH boards:
- Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
- Fix SAI pin muxing.
- Odyssey:
- Set DCMI pins.
* tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
ARM: dts: stm32: fix SAI sub nodes register range
ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey
ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
ARM: dts: stm32: add initial support of stm32mp135f-dk board
dt-bindings: stm32: document stm32mp135f-dk board
ARM: dts: stm32: add STM32MP13 SoCs support
Link: https://lore.kernel.org/r/9d52c3e2-a3b9-89f3-1896-7cd3560e7010@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- SPI Multi I/O Bus, SDHI, and Ethernet support for the RZ/G2L SoC,
- SPI Multi I/O Bus, camera, and video-on support for the R-Car V3U
SoC,
- SPI FLASH support for the Falcon development board,
- eMMC, microSD, and Ethernet support for the RZ/G2L SMARC EVK
development board,
- 2 GHz High-Performance support for the R-Car H3e-2G, M3e-2G, and
M3Ne-2G SoCs,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYWljoAAKCRCKwlD9ZEnx
cGxHAQDrT+JszN8OkMuwJ55OlOUsI1xXqWpWMmjC40gSn57piAD/QiRYaaSreWk6
WSPxrweQ4uNSntSHmFdo+lYs0ueryAk=
=XkNX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kSIg
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.16 (take two)
- SPI Multi I/O Bus, SDHI, and Ethernet support for the RZ/G2L SoC,
- SPI Multi I/O Bus, camera, and video-on support for the R-Car V3U
SoC,
- SPI FLASH support for the Falcon development board,
- eMMC, microSD, and Ethernet support for the RZ/G2L SMARC EVK
development board,
- 2 GHz High-Performance support for the R-Car H3e-2G, M3e-2G, and
M3Ne-2G SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
mailmap: Fix text encoding for Niklas Söderlund
arm64: dts: renesas: rcar-gen3e: Add Cortex-A57 2 GHz opps
arm64: dts: renesas: rzg2l-smarc-som: Enable Ethernet
arm64: dts: renesas: r9a07g044: Add GbEthernet nodes
arm64: dts: renesas: Add ports node to all adv7482 nodes
arm64: dts: renesas: r8a779a0: Add and connect all CSI-2, ISP and VIN nodes
arm64: dts: renesas: rzg2l-smarc: Enable microSD on SMARC platform
arm64: dts: renesas: rzg2l-smarc-som: Enable eMMC on SMARC platform
arm64: dts: renesas: r9a07g044: Add SDHI nodes
arm64: dts: renesas: falcon-cpu: Add SPI flash via RPC
arm64: dts: renesas: r8a779a0: Add RPC node
arm64: dts: renesas: r9a07g044: Add SPI Multi I/O Bus controller node
Link: https://lore.kernel.org/r/cover.1634298094.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New machines:
* TYAN S7106 BMC, a x86 server from about four years ago
- Descriptions for the AST2600 ADC, which now has an upstream driver
- Lots of GPIO line names. The OpenBMC project has adopted a scheme for
naming the lines, and new additions will follow this guide
- New I2C devices for Rainier, Everest, EthanolX, Mt Jade
- Fixes for fp5280g2 which has seen some recent development, including
the addtion of a QEmu machine for testing
-----BEGIN PGP SIGNATURE-----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=i5LZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6eyi
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.15
- New machines:
* TYAN S7106 BMC, a x86 server from about four years ago
- Descriptions for the AST2600 ADC, which now has an upstream driver
- Lots of GPIO line names. The OpenBMC project has adopted a scheme for
naming the lines, and new additions will follow this guide
- New I2C devices for Rainier, Everest, EthanolX, Mt Jade
- Fixes for fp5280g2 which has seen some recent development, including
the addtion of a QEmu machine for testing
* tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: fp5280g2: Use the 64M layout
ARM: dts: aspeed: Add TYAN S7106 BMC machine
ARM: dts: aspeed: rainier: Add power-config-full-load gpio
ARM: dts: aspeed: p10bmc: Define secure boot gpio
ARM: dts: aspeed: mtjade: Add some gpios
ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest
ARM: dts: everest: Define name for gpio line B6
ARM: dts: everest: Define name for gpio line Q2
ARM: dts: rainier: Define name for gpio line Q2
ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6
ARM: dts: aspeed: everest: Add I2C bus 15 muxes
ARM: dts: aspeed: rainier: Add system LEDs
ARM: dts: aspeed: amd-ethanolx: Add FRU EEPROM
ARM: dts: fp5280g2: Enable KCS 3 for MCTP binding
Link: https://lore.kernel.org/r/CACPK8XdrMzY9tzdof7KpzxKquTo7GcWW4N9Zqwtmmu73C7htXA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add SPMI PMIC support for the Hikey970 board
- Correct the sp805 watchdog compatible string to match the document
- Correct the operating-points table name to match the dtschema
-----BEGIN PGP SIGNATURE-----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=xa9d
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Z1IX
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.16' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: HiSilicon ARM64 DT updates for 5.16
- Add SPMI PMIC support for the Hikey970 board
- Correct the sp805 watchdog compatible string to match the document
- Correct the operating-points table name to match the dtschema
* tag 'hisi-arm64-dt-for-5.16' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: align operating-points table name with dtschema
arm64: dts: hisilicon: fix arm,sp805 compatible string
arm64: dts: hisilicon: Add support for Hikey 970 PMIC
Link: https://lore.kernel.org/r/6168EB53.60503@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Flag the janice SPI display lines properly for the right line
semantics.
- Fix some errors in the Skomer regulator configuration.
- Fix some SD card pin configurations on Skomer.
- Assign the Skomer SD card a 300 ms power-on delay.
- Rewrite the battery nodes to use the standard binding
"monitored-battery" as used in the updated bindings, and
provide the right Samsung battery compatibles for the Samsung
phones.
-----BEGIN PGP SIGNATURE-----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=VZoq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vIcZ
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 DTS updates:
- Flag the janice SPI display lines properly for the right line
semantics.
- Fix some errors in the Skomer regulator configuration.
- Fix some SD card pin configurations on Skomer.
- Assign the Skomer SD card a 300 ms power-on delay.
- Rewrite the battery nodes to use the standard binding
"monitored-battery" as used in the updated bindings, and
provide the right Samsung battery compatibles for the Samsung
phones.
* tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Switch battery nodes to standard
ARM: dts: ux500: Skomer eMMC needs 300 ms power on
ARM: dts: ux500: Fix up SD card pin config
ARM: dts: ux500: Skomer regulator fixes
ARM: dts: ux500: Tag Janice display SPI correct
Link: https://lore.kernel.org/r/CACRpkdYf5GwRvG1Gemk4mE+aw6UnAVTY8OudwsVNPQXThHXu6g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.16, please pull the following:
- Rafal updates the BCM4908 DTS files to produce fewer warnings by
fixing the UART clock name, moving the reboot syscon node out of the bus
node, and finally updating the NAND controller node names.
-----BEGIN PGP SIGNATURE-----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=i+W/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wvRL
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.16, please pull the following:
- Rafal updates the BCM4908 DTS files to produce fewer warnings by
fixing the UART clock name, moving the reboot syscon node out of the bus
node, and finally updating the NAND controller node names.
* tag 'arm-soc/for-5.16/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: Fix UART clock name
arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus
arm64: dts: broadcom: bcm4908: Fix NAND node name
Link: https://lore.kernel.org/r/20211013174016.831348-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
-----BEGIN PGP SIGNATURE-----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=KGAI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ptpv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
* tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits)
arm64: dts: broadcom: Add reference to RPi CM4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4
dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
dt-bindings: display: bcm2835: add optional property power-domains
ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
ARM: BCM53016: MR32: get mac-address from nvmem
ARM: BCM53016: Specify switch ports for Meraki MR32
ARM: dts: BCM53573: Add Tenda AC9 switch ports
ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
ARM: dts: BCM5301X: Specify switch ports for more devices
ARM: dts: NSP: Fix MX65 MDIO mux warnings
ARM: dts: NSP: Fix MX64/MX65 eeprom node name
ARM: dts: NSP: Fix MDIO mux node names
ARM: dts: NSP: Fix mpcore, mmc node names
ARM: dts: NSP: Add bcm958623hr board name to dts
ARM: dts: BCM5301X: Fix memory nodes names
ARM: dts: BCM5301X: Fix MDIO mux binding
ARM: dts: BCM5301X: Fix nodes names
...
Link: https://lore.kernel.org/r/20211013174016.831348-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Match Exynos5433 DTS with dtschema.
2. Add an Exynos Auto v9 SoC and SADK board. The Exynos Auto v9 is a
design for automotive for In-vehicle Infotainments (IVI) and Advanced
Driver-Assistance Systems (ADAS).
This pull request brings very basic support (pinctrl, UART and UFS
storage) with a development SADK (Samsung Automotive Development Kit)
board.
-----BEGIN PGP SIGNATURE-----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=MZjz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Bj2z
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.16
1. Match Exynos5433 DTS with dtschema.
2. Add an Exynos Auto v9 SoC and SADK board. The Exynos Auto v9 is a
design for automotive for In-vehicle Infotainments (IVI) and Advanced
Driver-Assistance Systems (ADAS).
This pull request brings very basic support (pinctrl, UART and UFS
storage) with a development SADK (Samsung Automotive Development Kit)
board.
* tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add minimal support for exynosautov9 sadk board
arm64: dts: exynos: add initial support for exynosautov9 SoC
arm64: dts: exynos: add proper comaptible FSYS syscon in Exynos5433
arm64: dts: exynos: align operating-points table name with dtschema in Exynos5433
Link: https://lore.kernel.org/r/20211013162418.43072-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated
firmware paths to the device specific firmware for modem and WiFi, to
allow these to be pushed to linux-next. The Longcheer L8150 gains extcon
support and the interrupt configuration for the accelerometer and
magnetometer are corrected.
MSM8998 gained descriptions for the multimedia clock controller and
iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is
updated to access the CRC corrected value space, the white LED (for
backlight) found in PMI8998 is described and GCC gains references to the
missing XO and sleep_clk reference clocks.
On top of this initial support for the Fxtec Pro1 QX1000 is added and
then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium,
with USB, touchscreen, SDHCI, Bluetooth and vibrator supported.
The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was
added, with support for frame buffer, GPU, audio, video encoder/decoder
and touchscreen.
The USB controller and PHY found in IPA6018 is described to provide USB
support. IPQ8074 gains a description of the SPMI controller.
The highlight on SC7180 is the introduction of the just released
"Homestar" device. CPU power coefficients are corrected based on
measurements, IMEM is described to ensure that remoteproc relocation
information is carried to post mortem debug tools and a few smaller
fixes are introduced.
The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones,
modem, CPU topology and updated memory map.
On SDM845 the "Limits hardware" is described and increases the
throttling temperature of the hardware from ~70C to 95C, with up to 30%
improvement in benchmarks as result. Relying on hardware throttling and
thermal pressure, the CPU cooling devices are dropped.
The power for the second WiFi channel is properly described for the
Lenovo Yoga C630, to ensure they are both powered.
reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660.
Initial support for the Snapdragon 690 (aka SM6350) is introduced, with
support for clocks, regulators, pinctrl, storage, thermal sensors, USB,
SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is
introduced.
-----BEGIN PGP SIGNATURE-----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=nWS9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fbG2
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 dts updates for v5.16
MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated
firmware paths to the device specific firmware for modem and WiFi, to
allow these to be pushed to linux-next. The Longcheer L8150 gains extcon
support and the interrupt configuration for the accelerometer and
magnetometer are corrected.
MSM8998 gained descriptions for the multimedia clock controller and
iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is
updated to access the CRC corrected value space, the white LED (for
backlight) found in PMI8998 is described and GCC gains references to the
missing XO and sleep_clk reference clocks.
On top of this initial support for the Fxtec Pro1 QX1000 is added and
then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium,
with USB, touchscreen, SDHCI, Bluetooth and vibrator supported.
The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was
added, with support for frame buffer, GPU, audio, video encoder/decoder
and touchscreen.
The USB controller and PHY found in IPA6018 is described to provide USB
support. IPQ8074 gains a description of the SPMI controller.
The highlight on SC7180 is the introduction of the just released
"Homestar" device. CPU power coefficients are corrected based on
measurements, IMEM is described to ensure that remoteproc relocation
information is carried to post mortem debug tools and a few smaller
fixes are introduced.
The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones,
modem, CPU topology and updated memory map.
On SDM845 the "Limits hardware" is described and increases the
throttling temperature of the hardware from ~70C to 95C, with up to 30%
improvement in benchmarks as result. Relying on hardware throttling and
thermal pressure, the CPU cooling devices are dropped.
The power for the second WiFi channel is properly described for the
Lenovo Yoga C630, to ensure they are both powered.
reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660.
Initial support for the Snapdragon 690 (aka SM6350) is introduced, with
support for clocks, regulators, pinctrl, storage, thermal sensors, USB,
SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is
introduced.
* tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (99 commits)
arm64: dts: qcom: sdm630-nile: Correct regulator label name
arm64: dts: qcom: sm6125: Improve indentation of multiline properties
arm64: dts: qcom: msm8916-longcheer-l8150: Use &pm8916_usbin extcon
arm64: dts: qcom: pm8916: Add pm8941-misc extcon for USB detection
arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000
arm64: dts: qcom: sc7280: Update Q6V5 MSS node
arm64: dts: qcom: sc7280: Add Q6V5 MSS node
arm64: dts: qcom: sc7280: Add nodes to boot modem
arm64: dts: qcom: sc7280: Add/Delete/Update reserved memory nodes
arm64: dts: qcom: sc7280: Update reserved memory map
arm64: dts: qcom: msm8998-fxtec-pro1: Add tlmm keyboard keys
arm64: dts: qcom: msm8998-fxtec-pro1: Add Goodix GT9286 touchscreen
arm64: dts: qcom: msm8998-fxtec-pro1: Add physical keyboard leds
arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000
arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clock
arm64: dts: qcom: msm8916-longcheer-l8150: Add missing sensor interrupts
arm64: dts: qcom: sc7180: Add IMEM and pil info regions
arm64: dts: qcom: pm6150l: Add missing include
arm64: dts: qcom: sm6350: Add device tree for Sony Xperia 10 III
arm64: dts: qcom: sm6350: Add apps_smmu and assign iommus prop to USB1
...
Link: https://lore.kernel.org/r/20211012231155.1036519-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
-----BEGIN PGP SIGNATURE-----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=x0TI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ur86
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.16
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
* tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom, add missing devices
ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY
ARM: dts: qcom: fill secondary compatible for multiple boards
ARM: dts: qcom: apq8064: adjust memory node according to specs
ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2
ARM: dts: qcom: Add support for LG G Watch R
dt-bindings: arm: qcom: Document APQ8026 SoC binding
ARM: dts: qcom: Add pm8226 PMIC
ARM: dts: qcom: msm8226: Add more SoC bits
dt-bindings: arm: qcom: Document SDX65 platform and boards
Link: https://lore.kernel.org/r/20211012174310.1017857-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- move dt-bindings reset controller includes to correct folder
- split PCIe node to use new format for mt2712 and mt7622
- mt8183: add audio node to chromebook devices
- mt8192: add clock controller node
-----BEGIN PGP SIGNATURE-----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=9lk3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nSdE
-----END PGP SIGNATURE-----
Merge tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
Biggest change is, that we have now support for a reset controller inside the
mmsys. This goes inhand with changes to the driver, that you will find in the
soc pull request.
Mediatek PCI device tree binding described the root port in a wrong. The IP
actaully implements several root complex with everyone having a single root port.
We need to fix the DT in an incompatible way to describe the HW as it is. This
also fixes a problem that no IRQ bigger then 32 could be handled.
The only public available HW that is affected by this is the BananaPi R64. I'm
not aware that there is a big user base using the upstream kernel. In this
boards PCI is only used for extension cards, so I don't expect any boot problems.
- mt8173: add reset for dsi0 to mmsys
- move dt-bindings reset controller includes to correct folder
- split PCIe node to use new format for mt2712 and mt7622
- mt8183: add audio node to chromebook devices
- mt8192: add clock controller node
* tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
dt-bindings: display: mediatek: add dsi reset optional property
dt-bindings: mediatek: Add #reset-cells to mmsys system controller
arm64: dts: mediatek: Move reset controller constants into common location
arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622
arm64: dts: mt8183: add kukui platform audio node
arm64: dts: mt8183: add audio node
arm64: dts: mediatek: Add mt8192 clock controllers
Link: https://lore.kernel.org/r/1a3d63a3-c020-3319-26f6-a2ec338cc42e@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to use ultra high speed modes (UHS) on the SD card slot, we
add matching pinctrls and fix the voltage switching for LDO5 of the
PMIC, by providing the SD_VSEL pin as GPIO to the PMIC driver.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This board consists of two boards:
the SoM board (VRC SoM) with the SoC on board, and the board for I/O (VRB).
The functions of each board supported by this update are as follows:
- VRC SoM
- WDT
- GPIO
- SDCard (SPI-MMC mode)
- I2C x1
- VRB board
- VRC SoM
- UART x2
- Ethernet phy
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211014092703.15251-4-yuji2.ishikawa@toshiba.co.jp
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Referring to the note under USBH reset and clocks chapter of RM0436,
"In order to access USBH_OHCI registers it is necessary to activate the USB
clocks by enabling the PLL controlled by USBPHYC" (ck_usbo_48m).
The point is, when USBPHYC PLL is not enabled, OHCI register access
freezes the resume from STANDBY. It is the case when dual USBH is enabled,
instead of OTG + single USBH.
When OTG is probed, as ck_usbo_48m is USBO clock parent, then USBPHYC PLL
is enabled and OHCI register access is OK.
This patch adds ck_usbo_48m (provided by USBPHYC PLL) as clock of USBH
OHCI, thus USBPHYC PLL will be enabled and OHCI register access will be OK.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.
Fixes: 5afd65c3a0 ("ARM: dts: stm32: add sai support on stm32mp157c")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
STUSB1600 IRQ (Alert pin) is active low (open drain). Interrupts may get
lost currently, so fix the IRQ type.
Fixes: 83686162c0 ("ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. The
DCMI pins used on this output are defined in the pin state definition
&pinctrl/dcmi-1, AKA &dcmi_pins_b (added in mainline commit
02814a4152). Set these pins as the default
pinctrl of the DCMI peripheral in the board device tree.
The pins are not used for any other purpose, so it seems safe to assume
most users will not need to override (delete) what this patch provides.
status defaults to "disabled", so the peripheral will not be
unnecessarily started. And the users who actually intend to make use of
a camera on the DVP port will have this little part of the configuration
ready.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.
There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex, so opt for the second option.
Fixes: 76045bc457 ("ARM: dts: stm32: Add QSPI NOR on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add support of stm32mp135f discovery board (part number: STM32MP135F-DK).
It embeds a STM32MP135F SOC with 512 MB of DDR3.
Several connections are available on this board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in this commit.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The R40 MBUS compatible was introduced recently but it was never
documented.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-26-maxime@cerno.tech
We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead. This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Property "postion" is not documented in the mma8452 binding. Remove it
to resolve the error in "make dtbs_check"
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The FPGA is not really a bus but more like an MFD device. Change the
compatible string from "simple-bus" to "simple-mfd". This also fix a
node name issue with simple-bus schema.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the #power-domain-cells for power-controller node as required by the
schema.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the following error from "make dtbs_check"
memory: False schema does not allow ...
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no regulator bus in hardware. So move the regulator nodes out
and remove the regulators simple-bus. This also make the dts align with
the simple-bus schema.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Disable the bus in the SoC dtsi file to be enabled only in board dts
files. Also breakup long values in the ifc node to fix dtbs_check.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Align the compatible strings with the board binding defined in schema
file.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
