Just use the %pg format specifier to print the name directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211020143812.6403-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calculation of cache_set's cached sectors is done by travelling
cached_devs list as shown below:
static void calc_cached_dev_sectors(struct cache_set *c)
{
...
list_for_each_entry(dc, &c->cached_devs, list)
sectors += bdev_sectors(dc->bdev);
c->cached_dev_sectors = sectors;
}
But cached_dev won't be unlinked from c->cached_devs list until we call
following list_move(&dc->list, &uncached_devices),
so previous fix in 'commit 46010141da
("bcache: recal cached_dev_sectors on detach")' is wrong, now we move
it to its right place.
Signed-off-by: Lin Feng <linf@wangsu.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211020143812.6403-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In register_bcache(), there are several cases we didn't set
correct error info (return value and/or error message):
- if kzalloc() fails, it needs to return ENOMEM and print
"cannot allocate memory";
- if register_cache() fails, it's better to propagate its
return value rather than using default EINVAL.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211020143812.6403-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There sre 3 bits in member high of struct bkey are never used, and no
plan to support them in future,
- HEADER_SIZE, start at bit 58, length 2 bits
- KEY_PINNED, start at bit 55, length 1 bit
No any kernel code, or user space tool references or accesses the three
bits. Therefore it is possible and feasible to reserve the valuable bits
from bkey.high. They can be used in future for other purpose.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211020143812.6403-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__dasd_device_check_path_events() calls the discipline path event handler.
This handler can leave the 'to be verified pathmask' populated for an
additional verification.
There is a race window where the worker has finished before
dasd_path_clear_all_verify() is called which resets the tbvpm.
Due to this there could be outstanding path verifications missed.
Fix by clearing the pathmasks before calling the handler and add them
again in case of an error.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20211020115124.1735254-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dasd_eckd_path_available_action() does a memory allocation to store
the per path configuration data permanently.
In the unlikely case that this allocation fails there is no conf_data
stored for the corresponding path.
This is OK since this is not necessary for an operational path but some
features like control unit initiated reconfiguration (CUIR) do not work.
To fix this add the path to the 'to be verified pathmask' again and
schedule the handler again.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20211020115124.1735254-7-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Summarize the dasd configuration data in a separate structure so that
functions that need temporary config data do not need to allocate the
whole eckd_private structure.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20211020115124.1735254-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dasd_eckd_read_conf is called multiple times during device setup but the
fc_security feature needs to be read only once. So move it into the calling
function.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20211020115124.1735254-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the cabling check out of dasd_eckd_read_conf and split it up into
separate functions to improve readability and re-use functions.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20211020115124.1735254-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix this:
drivers/s390/block/dasd_ioctl.c:666: warning:
Function parameter or member 'disk' not described in 'dasd_biodasdinfo'
drivers/s390/block/dasd_ioctl.c:666: warning:
Function parameter or member 'info' not described in 'dasd_biodasdinfo'
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20211020115124.1735254-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of the rather odd casts to character pointer of the
dasd_ccw_req magic member and simply use the unsigned int value
unmodified everywhere.
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20211020115124.1735254-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This memset in the fast path costs a lot of cycles on my setup. Here's a
top-of-profile of doing ~6.7M IOPS:
+ 5.90% io_uring [nvme] [k] nvme_queue_rq
+ 5.32% io_uring [nvme_core] [k] nvme_setup_cmd
+ 5.17% io_uring [kernel.vmlinux] [k] io_submit_sqes
+ 4.97% io_uring [kernel.vmlinux] [k] blkdev_direct_IO
and a perf diff with this patch:
0.92% +4.40% [nvme_core] [k] nvme_setup_cmd
reducing it from 5.3% to only 0.9%. This takes it from the 2nd most
cycle consumer to something that's mostly irrelevant.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't have to worry about doing extra memsets by moving it outside
the protection of RQF_DONTPREP, as nvme doesn't do partial completions.
This is in preparation for making the read/write fast path not do a full
memset of the command.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactoring of the Atari floppy driver when converting to blk-mq
has broken the state machine in not-so-subtle ways:
finish_fdc() must be called when operations on the floppy device
have completed. This is crucial in order to relase the ST-DMA
lock, which protects against concurrent access to the ST-DMA
controller by other drivers (some DMA related, most just related
to device register access - broken beyond compare, I know).
When rewriting the driver's old do_request() function, the fact
that finish_fdc() was called only when all queued requests had
completed appears to have been overlooked. Instead, the new
request function calls finish_fdc() immediately after the last
request has been queued. finish_fdc() executes a dummy seek after
most requests, and this overwrites the state machine's interrupt
hander that was set up to wait for completion of the read/write
request just prior. To make matters worse, finish_fdc() is called
before device interrupts are re-enabled, making certain that the
read/write interupt is missed.
Shifting the finish_fdc() call into the read/write request
completion handler ensures the driver waits for the request to
actually complete. With a queue depth of 2, we won't see long
request sequences, so calling finish_fdc() unconditionally just
adds a little overhead for the dummy seeks, and keeps the code
simple.
While we're at it, kill ataflop_commit_rqs() which does nothing
but run finish_fdc() unconditionally, again likely wiping out an
in-flight request.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff ("ataflop: convert to blk-mq")
CC: linux-block@vger.kernel.org
CC: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/r/20211019061321.26425-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a problem that nbd_handle_reply() might access freed request:
1) At first, a normal io is submitted and completed with scheduler:
internel_tag = blk_mq_get_tag -> get tag from sched_tags
blk_mq_rq_ctx_init
sched_tags->rq[internel_tag] = sched_tag->static_rq[internel_tag]
...
blk_mq_get_driver_tag
__blk_mq_get_driver_tag -> get tag from tags
tags->rq[tag] = sched_tag->static_rq[internel_tag]
So, both tags->rq[tag] and sched_tags->rq[internel_tag] are pointing
to the request: sched_tags->static_rq[internal_tag]. Even if the
io is finished.
2) nbd server send a reply with random tag directly:
recv_work
nbd_handle_reply
blk_mq_tag_to_rq(tags, tag)
rq = tags->rq[tag]
3) if the sched_tags->static_rq is freed:
blk_mq_sched_free_requests
blk_mq_free_rqs(q->tag_set, hctx->sched_tags, i)
-> step 2) access rq before clearing rq mapping
blk_mq_clear_rq_mapping(set, tags, hctx_idx);
__free_pages() -> rq is freed here
4) Then, nbd continue to use the freed request in nbd_handle_reply
Fix the problem by get 'q_usage_counter' before blk_mq_tag_to_rq(),
thus request is ensured not to be freed because 'q_usage_counter' is
not zero.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210916141810.2325276-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare to fix uaf in nbd_read_stat(), no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-7-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check if sock_xmit() return 0 is useless because it'll never return
0, comment it and remove such checkings.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-6-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 6a468d5990 ("nbd: don't start req until after the dead
connection logic") move blk_mq_start_request() from nbd_queue_rq()
to nbd_handle_cmd() to skip starting request if the connection is
dead. However, request is still started in other error paths.
Currently, blk_mq_end_request() will be called immediately if
nbd_queue_rq() failed, thus start request in such situation is
useless. So remove blk_mq_start_request() from error paths in
nbd_handle_cmd().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-5-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sock that clent send request in nbd_send_cmd() and receive reply
in nbd_read_stat() should be the same.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-4-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit cddce01160 ("nbd: Aovid double completion of a request")
try to fix that nbd_clear_que() and recv_work() can complete a
request concurrently. However, the problem still exists:
t1 t2 t3
nbd_disconnect_and_put
flush_workqueue
recv_work
blk_mq_complete_request
blk_mq_complete_request_remote -> this is true
WRITE_ONCE(rq->state, MQ_RQ_COMPLETE)
blk_mq_raise_softirq
blk_done_softirq
blk_complete_reqs
nbd_complete_rq
blk_mq_end_request
blk_mq_free_request
WRITE_ONCE(rq->state, MQ_RQ_IDLE)
nbd_clear_que
blk_mq_tagset_busy_iter
nbd_clear_req
__blk_mq_free_request
blk_mq_put_tag
blk_mq_complete_request -> complete again
There are three places where request can be completed in nbd:
recv_work(), nbd_clear_que() and nbd_xmit_timeout(). Since they
all hold cmd->lock before completing the request, it's easy to
avoid the problem by setting and checking a cmd flag.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While handling a response message from server, nbd_read_stat() will
try to get request by tag, and then complete the request. However,
this is problematic if nbd haven't sent a corresponding request
message:
t1 t2
submit_bio
nbd_queue_rq
blk_mq_start_request
recv_work
nbd_read_stat
blk_mq_tag_to_rq
blk_mq_complete_request
nbd_send_cmd
Thus add a new cmd flag 'NBD_CMD_INFLIGHT', it will be set in
nbd_send_cmd() and checked in nbd_read_stat().
Noted that this patch can't fix that blk_mq_tag_to_rq() might
return a freed request, and this will be fixed in following
patches.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/0fea349c808c6cfbf549b0e33701320c7860c8b7.1634234221.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the in memory flag is changed, we need to persist the change in the
rdev superblock flags. This is needed for "writemostly" and "failfast".
Reviewed-by: Li Feng <fengli@smartx.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Actually, mddev is not used by md_new_event.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's call roundup_pow_of_two here instead of open code.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already get rdev from conf->mirrors[i].rdev at the beginning of the
loop, so just use it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 6607cd319b ("raid1: ensure write
behind bio has less than BIO_MAX_VECS sectors") tried to guarantee the
size of behind bio is not bigger than BIO_MAX_VECS sectors.
Unfortunately the same calltrace still could happen since an array could
enable write-behind without write mostly device.
To match the manpage of mdadm (which says "write-behind is only attempted
on drives marked as write-mostly"), we need to check WriteMostly flag to
avoid such unexpected behavior.
[1]. https://bugzilla.kernel.org/show_bug.cgi?id=213181#c25
Cc: stable@vger.kernel.org # v5.12+
Cc: Jens Stutte <jens@chianterastutte.eu>
Reported-by: Jens Stutte <jens@chianterastutte.eu>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add proper error handling to delete the gendisk when failing to add
the md kobject and clean up the error unwinding in general.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disks_mutex is intended to serialize md_alloc. Extended it to also cover
the kobject_uevent call and getting the sysfs dirent to help reducing
error handling complexity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the deprecated default_attrs with the default_groups mechanism,
and add the always visible bitmap group to the groups created add
kobject_add time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
We just do the unwinding of what was not done before, and are
sure to unlock prior to bailing.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
swim3 got this through blkdev.h previously, but blkdev.h is not including
it anymore. Include it specifically for the driver, otherwise FLOPPY_MAJOR
is undefined and breaks the compile on PPC if swim3 is configured.
Fixes: b81e0c2372 ("block: drop unused includes in <linux/genhd.h>")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return a negative error code here on this error path instead of
returning success.
Fixes: 637208e74a ("block/sx8: add error handling support for add_disk()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001122722.GC2283@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20210927220110.1066271-7-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-15-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using two separate code paths for cleaning up an atari disk,
use one. We take the more careful approach to check for *all* disk
types, as is done on exit. The init path didn't have that check as
the alternative disk types are only probed for later, they are not
initialized by default.
Yes, there is a shared tag for all disks.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-14-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ataflop assumes del_gendisk() is safe to call, this is only
true because add_disk() does not return a failure, but that will
change soon. And so, before we get to adding error handling for
that case, let's make sure we keep track of which disks actually
get registered. Then we use this to only call del_gendisk for them.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-13-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Since we have a caller to do our unwinding for the disk,
and this is already dealt with safely we can re-use our
existing error path goto label which already deals with
the cleanup.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-11-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of calling del_gendisk() on exit alone, let's add
a registration bool to the floppy disk state, this way this can
be done on the shared caller, swim_cleanup_floppy_disk().
This will be more useful in subsequent patches. Right now, this
just shuffles functionality out to a helper in a safe way.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-10-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Disk cleanup can be shared between exit and bringup. Use a
helper to do the work required. The only functional change at
this point is we're being overly paraoid on exit to check for
a null disk as well now, and this should be safe.
We'll later expand on this, this change just makes subsequent
changes easier to read.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-9-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can simplify swim_remove() by using one call instead of two,
just as other drivers do. Use that pattern.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-8-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling. The caller for fd_alloc_disk() deals with
the rest of the cleanup like the tag.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-7-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-6-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
platform_device_unregister() should only be called when
a respective platform_device_register() is called. However
the floppy driver currently allows failures when registring
a drive and a bail out could easily cause an invalid call
to platform_device_unregister() where it was not intended.
Fix this by adding a bool to keep track of when the platform
device was registered for a drive.
This does not fix any known panic / bug. This issue was found
through code inspection while preparing the driver to use the
up and coming support for device_add_disk() error handling.
From what I can tell from code inspection, chances of this
ever happening should be insanely small, perhaps OOM.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-5-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the blk_cleanup_queue() followed by put_disk() can be
replaced with blk_cleanup_disk(). No need for two separate
loops.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-4-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
