We really need debug mode assertions that ca->ref and ca->io_ref are
used correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This splits out btree topology repair into a separate pass, and makes
some improvements:
- When we have to pick which of two overlapping nodes to drop keys
from, we use the btree node header sequence number to preserve the
newer node
- the gc code has been changed so that it doesn't bail out if we're
continuing/ignoring on fsck error - this way the dump tool can skip
running the repair pass but still walk all reachable metadata
- add a new superblock flag indicating when a filesystem is known to
have btree topology issues, and the topology repair pass should be
run
- changing the start/end of a node might mean keys in that node have to
be deleted: this patch handles that better by splitting it out into a
separate function and running it explicitly in the topology repair
code, previously those keys were only being dropped when the btree
node was read in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This lets us simplify fsck quite a bit, which we need for making fsck
snapshot aware.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We've had BCH_FEATURE_atomic_nlink for quite some time, we can drop this
now.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch starts treating the bpos.snapshot field like part of the key
in the btree code:
* bpos_successor() and bpos_predecessor() now include the snapshot field
* Keys in btrees that will be using snapshots (extents, inodes, dirents
and xattrs) now always have their snapshot field set to U32_MAX
The btree iterator code gets a new flag, BTREE_ITER_ALL_SNAPSHOTS, that
determines whether we're iterating over keys in all snapshots or not -
internally, this controlls whether bkey_(successor|predecessor)
increment/decrement the snapshot field, or only the higher bits of the
key.
We add a new member to struct btree_iter, iter->snapshot: when
BTREE_ITER_ALL_SNAPSHOTS is not set, iter->pos.snapshot should always
equal iter->snapshot, which will be 0 for btrees that don't use
snapshots, and alsways U32_MAX for btrees that will use snapshots
(until we enable snapshot creation).
This patch also introduces a new metadata version number, and compat
code for reading from/writing to older versions - this isn't a forced
upgrade (yet).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With snapshots, we're going to need to differentiate between comparisons
that should and shouldn't include the snapshot field. bpos_cmp is now
the comparison function that does include the snapshot field, used by
core btree code.
Upper level filesystem code generally does _not_ want to compare against
the snapshot field - that code wants keys to compare as equal even when
one of them is in an ancestor snapshot.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is mkfs's job. Also, clean up the handling of feature bits some.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The bkey compat code wasn't being run for btree roots in the superblock
clean section - this patch fixes it to use the journal entry validate
code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs has been aggressively migrating filesystems and btree nodes to
the new format for quite some time - this shouldn't affect anyone
anymore, and lets us delete a _lot_ of code. Also, it frees up
KEY_TYPE_discard for a new whiteout key type for snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is useful for the filesystem dump debugging tool - when we're
hitting bugs we want to skip as much of the recovery process as
possible, and the dump tool only needs to know where metadata lives.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is to generate strings for them, so that we can print them out.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Having a packed format that can represent a field larger than the
unpacked type breaks bkey_packed_successor() assertions - we need to fix this to start using the snapshot filed.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We dropped support for !BTREE_NODE_NEW_EXTENT_OVERWRITE but it turned
out there were people who still had filesystems with btree nodes in that
format in the wild. This adds a new compat feature that indicates we've
scanned for and rewritten nodes in the old format, and does that scan at
mount time if the option isn't set.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When snapshots arrive, we won't necessarily be able to arbitrarily split
existis - when we need to split an existing extent, we'll have to check
if the extent was overwritten in child snapshots and if so emit a
whiteout for the split in the child snapshot.
Because extents couldn't span btree nodes previously, journal replay
would sometimes have to split existing extents. That's no good anymore,
but fortunately since extent handling has already been lifted above most
of the btree code there's no real need for that rule anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're using BCH_FEATURE_alloc_v2 to also gate journalling updates to dev
usage - we don't have the code for reconstructing this from buckets
anymore, so we need to run fsck if it's not set.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This eliminates the need to scan every bucket to regenerate dev_usage at
mount time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Originally, bcachefs - going back to bcache - stored, for each bucket, a
16 bit counter corresponding to how long it had been since the bucket
was read from. But, this required periodically rescaling counters on
every bucket to avoid wraparound. That wasn't an issue in bcache, where
we'd perodically rewrite the per bucket metadata all at once, but in
bcachefs we're trying to avoid having to walk every single bucket.
This patch switches to persisting 64 bit io clocks, corresponding to the
64 bit bucket timestaps introduced in the previous patch with
KEY_TYPE_alloc_v2.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we walk the btrees during recovery, part of that is checking that
btree topology is correct: for every interior btree node, its child
nodes should exactly span the range the parent node covers.
Previously, we had checks for this, but not repair code. Now that we
have the ability to do btree updates during initial GC, this patch adds
that repair code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Some errors may need to be fixed in order for GC to successfully run -
walk and mark all metadata. But we can't start the allocators and do
normal btree updates until after GC has completed, and allocation
information is known to be consistent, so we need a different method of
doing btree updates.
Fortunately, we already have code for walking the btree while overlaying
keys from the journal to be replayed. This patch adds an update path
that adds keys to the list of keys to be replayed by journal replay, and
also fixes up iterators.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was useful before we had transactional updates to interior btree
nodes - but now, it's just extra unneeded complexity.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug where mark and sweep gc incorrectly was clearing out
the stripes heap and causing assertions to fire later - simpler to just
create the stripes heap after gc has finished.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_and_journal_walk() walks the btree overlaying keys from the
journal; it was introduced so that we could read in the alloc btree
prior to journal replay being done, when journalling of updates to
interior btree nodes was introduced.
But it didn't have btree node prefetching, which introduced a severe
regression with mount times, particularly on spinning rust. This patch
implements btree node prefetching for the btree + journal walk,
hopefully fixing that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Alloc info isn't stored on a particular device, it makes no sense to
only be writing it out for rw members - this was causing fsck to not fix
alloc info errors, oops.
Also, make sure we write out alloc info in other repair paths.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With various newer key types - stripe keys, inline data extents - the
old approach of calculating the maximum size of the value is becoming
more and more error prone. Better to switch to bkey_on_stack, which can
dynamically allocate if necessary to handle any size bkey.
In particular we also want to get rid of BKEY_EXTENT_VAL_U64s_MAX.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is needed to fix a bug where we're overflowing iterators within a
btree transaction, because we're updating the stripes btree (to update
block counts) and the stripes btree trigger is unnecessarily updating
the alloc btree - it doesn't need to update the alloc btree when the
pointers within a stripe aren't changing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds a flag to journal entries which, if set, indicates that
they weren't done as flush/fua writes.
- non flush/fua journal writes don't update last_seq (i.e. they don't
free up space in the journal), thus the journal free space
calculations now check whether nonflush journal writes are currently
allowed (i.e. are we low on free space, or would doing a flush write
free up a lot of space in the journal)
- write_delay_ms, the user configurable option for when open journal
entries are automatically written, is now interpreted as the max
delay between flush journal writes (default 1 second).
- bch2_journal_flush_seq_async is changed to ensure a flush write >=
the requested sequence number has happened
- journal read/replay must now ignore, and blacklist, any journal
entries newer than the most recent flush entry in the journal. Also,
the way the read_entire_journal option is handled has been improved;
struct journal_replay now has an entry, 'ignore', for entries that
were read but should not be used.
- assorted refactoring and improvements related to journal read in
journal_io.c and recovery.c
Previously, we'd have to issue a flush/fua write every time we
accumulated a full journal entry - typically the bucket size. Now we
need to issue them much less frequently: when an fsync is requested, or
it's been more than write_delay_ms since the last flush, or when we need
to free up space in the journal. This is a significant performance
improvement on many write heavy workloads.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch increases the maximum journal buffers in flight from 2 to 4 -
this will be particularly helpful when in the future we stop requiring
flush+fua for every journal write.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we now always preallocate the maximum number of iterators when we
initialize a btree transaction, getting an iterator never fails - we can
delete a fair amount of error path code.
This patch also simplifies the iterator allocation code a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Introducing the journal+btree iter introduced a regression where we
stopped using BTREE_ITER_PREFETCH - this is a performance regression on
rotating disks.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't run journal reclaim until we've finished replaying updates to
interior btree nodes - the check for this was in the wrong place though,
leading to journal reclaim spinning before it was allowed to proceed.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
extent_replay_key dates from before putting iterators was required -
fixed.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previous varint implementation used by the inode code was not nearly as
fast as it could have been; partly because it was attempting to encode
integers up to 96 bits (for timestamps) but this meant that encoding and
decoding the length required a table lookup.
Instead, we'll just encode timestamps greater than 64 bits as two
separate varints; this will make decoding/encoding of inodes
significantly faster overall.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug where we'd pop an assertion due to replaying a key for
an interior btree node when that node no longer exists.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we've got transactional alloc info updates (and have for
awhile), we don't need to write it out on shutdown, and we don't need to
write it out on startup except when GC found errors - this is a big
improvement to mount/unmount performance.
This patch also fixes a few bugs where we weren't writing out alloc
info (on new filesystems, and new devices) and should have been.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we would start doing btree updates before writing the first
journal entry; if this was after an unclean shutdown, this could cause
those btree updates to not be blacklisted.
Also, move some code to headers for userspace debug tools.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There is a bug where we cnan end up clearing the data_has field in the
superblock members section, which causes us to skip reading the journal
and thus journal replay fails. This option tells the recovery path to
not trust those fields.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is prep work for reworking the triggers machinery - we have
triggers that need to know both the old and the new key.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
To be used the debug tool that dumps the contents of the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Before we were setting features after allocating btree nodes, which
meant we were using the old btree pointer format.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now update the alloc info (bucket sector counts) atomically with
journalling the update to the interior btree nodes, and we also set new
btree roots atomically with the journalled part of the btree update.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When updates to interior nodes started being journalled, that meant that
after an unclean shutdown, until journal replay is done we can't walk
the btree without overlaying the updates from the journal.
The initial btree gc was changed to walk the btree overlaying keys from
the journal - but bch2_alloc_read() and bch2_stripes_read() were missed.
Major whoops...
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
