Add support for sending the events to the host over MHI bus from the
endpoint. Following events are supported:
1. Transfer completion event
2. Command completion event
3. State change event
4. Execution Environment (EE) change event
An event is sent whenever an operation has been completed in the MHI EP
device. Event is sent using the MHI event ring and additionally the host
is notified using an IRQ if required.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for managing the MHI ring. The MHI ring is a circular queue
of data structures used to pass the information between host and the
endpoint.
MHI support 3 types of rings:
1. Transfer ring
2. Event ring
3. Command ring
All rings reside inside the host memory and the MHI EP device maps it to
the device memory using blocks like PCIe iATU. The mapping is handled in
the MHI EP controller driver itself.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for managing the Memory Mapped Input Output (MMIO) registers
of the MHI bus. All MHI operations are carried out using the MMIO registers
by both host and the endpoint device.
The MMIO registers reside inside the endpoint device memory (fixed
location based on the platform) and the address is passed by the MHI EP
controller driver during its registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit adds support for creating and destroying MHI endpoint devices.
The MHI endpoint devices binds to the MHI endpoint channels and are used
to transfer data between MHI host and endpoint device.
There is a single MHI EP device for each channel pair. The devices will be
created when the corresponding channels has been started by the host and
will be destroyed during MHI EP power down and reset.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit adds support for registering MHI endpoint client drivers
with the MHI endpoint stack. MHI endpoint client drivers bind to one
or more MHI endpoint devices inorder to send and receive the upper-layer
protocol packets like IP packets, modem control messages, and
diagnostics messages over MHI bus.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit adds support for registering MHI endpoint controller drivers
with the MHI endpoint stack. MHI endpoint controller drivers manage
the interaction with the host machines (such as x86). They are also the
MHI endpoint bus master in charge of managing the physical link between
the host and endpoint device. Eventhough the MHI spec is bus agnostic,
the current implementation is entirely based on PCIe bus.
The endpoint controller driver encloses all information about the
underlying physical bus like PCIe. The registration process involves
parsing the channel configuration and allocating an MHI EP device.
Channels used in the endpoint stack follows the perspective of the MHI
host stack. i.e.,
UL - From host to endpoint
DL - From endpoint to host
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
There are a few separately maintained driver subsystems that we merge through
the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs,
and clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport based
on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ
and older NVIDIA Tegra chips
-----BEGIN PGP SIGNATURE-----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=Cfbk
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
mhi_state_str[] array could be used by MHI endpoint stack also. So let's
make the array as "static inline function" and move it inside the
"common.h" header so that the endpoint stack could also make use of it.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the common MHI definitions in host "internal.h" to "common.h" so
that the endpoint code can make use of them. This also avoids
duplicating the definitions in the endpoint stack.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Structure "struct mhi_tre" is representing a generic MHI ring element and
not specifically a Transfer Ring Element (TRE). Fix the naming.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup includes:
1. Using the GENMASK macro for masks
2. Removing brackets for single values
3. Using lowercase for hex values
4. Using two digits for hex values where applicable
5. Aligning the defines on same column
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the hardcoded bits in DWORD definitions, let's use the
bitfield operations to make it more clear how the DWORDs are structured.
Suggested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions like mhi_read_reg_field(), mhi_poll_reg_field() and
mhi_write_reg_field() could be modified to not depend on the shift value
passed as an argument. Instead, the bitfield operation could be used to
extract the shift value from the mask itself.
This eliminates the need to define _SHIFT (and _SHFT) macros and
simplifies the code a bit. For shift values those cannot be determined
during build time, "__ffs()" helper is used find the shift value during
runtime.
While at it, let's also get rid of 32-bit masks like CHDBOFF_CHDBOFF_MASK
by doing the full 32-bit register read.
Suggested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation of the endpoint MHI support, let's move the host MHI code
to its own "host" directory and adjust the toplevel MHI Kconfig & Makefile.
While at it, let's also move the "pci_generic" driver to "host" directory
as it is a host MHI controller driver.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MHI driver does not work on big endian architectures. The
controller never transitions into mission mode. This appears to be due
to the modem device expecting the various contexts and transfer rings to
have fields in little endian order in memory, but the driver constructs
them in native endianness.
Fix MHI event, channel and command contexts and TRE handling macros to
use explicit conversion to little endian. Mark fields in relevant
structures as little endian to document this requirement.
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Fixes: 6cd330ae76 ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On big endian architectures the mhi debugfs files which report pm state
give "Invalid State" for all states. This is caused by using
find_last_bit which takes an unsigned long* while the state is passed in
as an enum mhi_pm_state which will be of int size.
Fix by using __fls to pass the value of state instead of find_last_bit.
Also the current API expects "mhi_pm_state" enumerator as the function
argument but the function only works with bitmasks. So as Alex suggested,
let's change the argument to u32 to avoid confusion.
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Cc: stable@vger.kernel.org
[mani: changed the function argument to u32]
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: 2121aa3e23 ("mips: cdmm: Add mti,mips-cdmm dtb node support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add OF reconfiguration notifier handler for WEIM bus to setup Chip
Select timings on runtime creation of child devices.
However, it is not possible to load another DT overlay with conflicting
CS timings with previously loaded overlay, even if the first one is
unloaded. The reason is that there is no acces to CS timing property of
a device node being removed, thus we can't track which of configured CS
are available for re-configuration.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Cinterion MV31-W, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Link: https://lore.kernel.org/r/20220119102519.5342-1-slark_xiao@163.com
[mani: Modified the commit message to reflect Cinterion MV31-W and CCed stable]
Fixes: 87693e092b ("bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI")
Cc: stable@vger.kernel.org # v5.14 +
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Foxconn SDX55, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Link: https://lore.kernel.org/r/20220119101213.5008-1-slark_xiao@163.com
[mani: Added pci_generic prefix to subject and CCed stable]
Fixes: aac426562f ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Cc: stable@vger.kernel.org # v5.12+
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=Vgg4
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use pci_find_vsec_capability() instead of open-coding it (Andy
Shevchenko)
- Convert pci_dev_present() stub from macro to static inline to avoid
'unused variable' errors (Hans de Goede)
- Convert sysfs slot attributes from default_attrs to default_groups
(Greg Kroah-Hartman)
- Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
(Rajat Jain)
- Remove unnecessary initialization of static variables (Longji Guo)
Resource management:
- Always write Intel I210 ROM BAR on update to work around device
defect (Bjorn Helgaas)
PCIe native device hotplug:
- Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
- Fix infinite loop in pciehp IRQ handler on power fault (Lukas
Wunner)
Power management:
- Convert amd64-agp, sis-agp, via-agp from legacy PCI power
management to generic power management (Vaibhav Gupta)
IOMMU:
- Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
so it can work with an IOMMU (Yifeng Li)
Error handling:
- Add PCI_ERROR_RESPONSE and related definitions for signaling and
checking for transaction errors on PCI (Naveen Naidu)
- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
instead of in host controller drivers, when transactions fail on
PCI (Naveen Naidu)
- Use PCI_POSSIBLE_ERROR() to check for possible failure of config
reads (Naveen Naidu)
Peer-to-peer DMA:
- Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)
ASPM:
- Calculate link L0s and L1 exit latencies when needed instead of
caching them (Saheed O. Bolarinwa)
- Calculate device L0s and L1 acceptable exit latencies when needed
instead of caching them (Saheed O. Bolarinwa)
- Remove struct aspm_latency since it's no longer needed (Saheed O.
Bolarinwa)
APM X-Gene PCIe controller driver:
- Fix IB window setup, which was broken by the fact that IB resources
are now sorted in address order instead of DT dma-ranges order (Rob
Herring)
Apple PCIe controller driver:
- Enable clock gating to save power (Hector Martin)
- Fix REFCLK1 enable/poll logic (Hector Martin)
Broadcom STB PCIe controller driver:
- Declare bitmap correctly for use by bitmap interfaces (Christophe
JAILLET)
- Clean up computation of legacy and non-legacy MSI bitmasks (Florian
Fainelli)
- Update suspend/resume/remove error handling to warn about errors
and not fail the operation (Jim Quinlan)
- Correct the "pcie" and "msi" interrupt descriptions in DT binding
(Jim Quinlan)
- Add DT bindings for endpoint voltage regulators (Jim Quinlan)
- Split brcm_pcie_setup() into two functions (Jim Quinlan)
- Add mechanism for turning on voltage regulators for connected
devices (Jim Quinlan)
- Turn voltage regulators for connected devices on/off when bus is
added or removed (Jim Quinlan)
- When suspending, don't turn off voltage regulators for wakeup
devices (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Use DWC common ops instead of layerscape-specific link-up functions
(Hou Zhiqiang)
Intel VMD host bridge driver:
- Honor platform ACPI _OSC feature negotiation for Root Ports below
VMD (Kai-Heng Feng)
- Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
- Reset everything below VMD before enumerating to work around
failure to enumerate NVMe devices when guest OS reboots (Nirmal
Patel)
Bridge emulation (used by Marvell Aardvark and MVEBU):
- Make emulated ROM BAR read-only by default (Pali Rohár)
- Make some emulated legacy PCI bits read-only for PCIe devices (Pali
Rohár)
- Update reserved bits in emulated PCIe Capability (Pali Rohár)
- Allow drivers to emulate different PCIe Capability versions (Pali
Rohár)
- Set emulated Capabilities List bit for all PCIe devices, since they
must have at least a PCIe Capability (Pali Rohár)
Marvell Aardvark PCIe controller driver:
- Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
Rohár)
- Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
registers (Pali Rohár)
- Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)
- Disable bus mastering when unbinding host controller driver (Pali
Rohár)
- Mask all interrupts when unbinding host controller driver (Pali
Rohár)
- Fix memory leak in host controller unbind (Pali Rohár)
- Assert PERST# when unbinding host controller driver (Pali Rohár)
- Disable link training when unbinding host controller driver (Pali
Rohár)
- Disable common PHY when unbinding host controller driver (Pali
Rohár)
- Fix resource type checking to check only IORESOURCE_MEM, not
IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Implement pci_remap_iospace() for ARM so mvebu can use
devm_pci_remap_iospace() instead of the previous ARM-specific
pci_ioremap_io() interface (Pali Rohár)
- Use the standard pci_host_probe() instead of the device-specific
mvebu_pci_host_probe() (Pali Rohár)
- Replace all uses of ARM-specific pci_ioremap_io() with the ARM
implementation of the standard pci_remap_iospace() interface and
remove pci_ioremap_io() (Pali Rohár)
- Skip initializing invalid Root Ports (Pali Rohár)
- Check for errors from pci_bridge_emul_init() (Pali Rohár)
- Ignore any bridges at non-zero function numbers (Pali Rohár)
- Return ~0 data for invalid config read size (Pali Rohár)
- Disallow mapping interrupts on emulated bridges (Pali Rohár)
- Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
initialization (Pali Rohár)
- Make type bits in Root Port I/O Base register read-only (Pali
Rohár)
- Disable Root Port windows when base/limit set to invalid values
(Pali Rohár)
- Set controller to Root Complex mode (Pali Rohár)
- Set Root Port Class Code to PCI Bridge (Pali Rohár)
- Update emulated Root Port secondary bus numbers to better reflect
the actual topology (Pali Rohár)
- Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
pci_reset_secondary_bus() can reset connected devices (Pali Rohár)
- Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
Ports (Pali Rohár)
- Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
(Pali Rohár)
- Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
Armada XP and newer devices (Pali Rohár)
- Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
(Pali Rohár)
- Add support for compiling as a module (Pali Rohár)
MediaTek PCIe controller driver:
- Assert PERST# for 100ms to allow power and clock to stabilize
(qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
respond to the request causes failure to exit L1 PM Substate
(Jianjun Wang)
MediaTek MT7621 PCIe controller driver:
- Declare mt7621_pci_ops static (Sergio Paracuellos)
- Give pcibios_root_bridge_prepare() access to host bridge windows
(Sergio Paracuellos)
- Move MIPS I/O coherency unit setup from driver to
pcibios_root_bridge_prepare() (Sergio Paracuellos)
- Add missing MODULE_LICENSE() (Sergio Paracuellos)
- Allow COMPILE_TEST for all arches (Sergio Paracuellos)
Microsoft Hyper-V host bridge driver:
- Add hv-internal interfaces to encapsulate arch IRQ dependencies
(Sunil Muthuswamy)
- Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)
Qualcomm PCIe controller driver:
- Undo PM setup in qcom_pcie_probe() error handling path (Christophe
JAILLET)
- Use __be16 type to store return value from cpu_to_be16()
(Manivannan Sadhasivam)
- Constify static dw_pcie_ep_ops (Rikard Falkeborn)
Renesas R-Car PCIe controller driver:
- Fix aarch32 abort handler so it doesn't check the wrong bus clock
before accessing the host controller (Marek Vasut)
TI Keystone PCIe controller driver:
- Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
DT properties (Kishon Vijay Abraham I)
MicroSemi Switchtec management driver:
- Add Gen4 automotive device IDs (Kelvin Cao)
- Declare state_names[] as static so it's not allocated and
initialized for every call (Kelvin Cao)
Host controller driver cleanups:
- Use of_device_get_match_data(), not of_match_device(), when we only
need the device data in altera, artpec6, cadence, designware-plat,
dra7xx, keystone, kirin (Fan Fei)
- Drop pointless of_device_get_match_data() cast in j721e (Bjorn
Helgaas)
- Drop redundant struct device * from j721e since struct cdns_pcie
already has one (Bjorn Helgaas)
- Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
- Fix invalid address space conversions in hisi, spear13xx (Bjorn
Helgaas)
Miscellaneous:
- Sort Intel Device IDs by value (Andy Shevchenko)
- Change Capability offsets to hex to match spec (Baruch Siach)
- Correct misspellings (Krzysztof Wilczyński)
- Terminate statement with semicolon in pci_endpoint_test.c (Ming
Wang)"
* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
PCI: mt7621: Allow COMPILE_TEST for all arches
PCI: mt7621: Add missing MODULE_LICENSE()
PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
PCI: Let pcibios_root_bridge_prepare() access bridge->windows
PCI: mt7621: Declare mt7621_pci_ops static
PCI: brcmstb: Do not turn off WOL regulators on suspend
PCI: brcmstb: Add control of subdevice voltage regulators
PCI: brcmstb: Add mechanism to turn on subdev regulators
PCI: brcmstb: Split brcm_pcie_setup() into two funcs
dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
PCI: brcmstb: Fix function return value handling
PCI: brcmstb: Do not use __GENMASK
PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
PCI: hv: Add arm64 Hyper-V vPCI support
PCI: hv: Make the code arch neutral by adding arch specific interfaces
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
x86/PCI: Remove initialization of static variables to false
PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
misc: pci_endpoint_test: Terminate statement with semicolon
...
Here is the large set of char, misc, and other "small" driver subsystem
changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the full
details.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z
hMr9mISG4r6g4PvjrJBj
=9May
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char, misc, and other "small" driver
subsystem changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the
full details.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
dt-bindings: mux: Document mux-states property
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
counter: remove old and now unused registration API
counter: ti-eqep: Convert to new counter registration
counter: stm32-lptimer-cnt: Convert to new counter registration
counter: stm32-timer-cnt: Convert to new counter registration
counter: microchip-tcb-capture: Convert to new counter registration
counter: ftm-quaddec: Convert to new counter registration
counter: intel-qep: Convert to new counter registration
counter: interrupt-cnt: Convert to new counter registration
counter: 104-quad-8: Convert to new counter registration
counter: Update documentation for new counter registration functions
counter: Provide alternative counter registration functions
counter: stm32-timer-cnt: Convert to counter_priv() wrapper
counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
counter: ti-eqep: Convert to counter_priv() wrapper
counter: ftm-quaddec: Convert to counter_priv() wrapper
counter: intel-qep: Convert to counter_priv() wrapper
counter: microchip-tcb-capture: Convert to counter_priv() wrapper
...
Treewide cleanup and consolidation of MSI interrupt handling in
preparation for further changes in this area which are necessary to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space
-----BEGIN PGP SIGNATURE-----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=vKzd
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU,
as well as a new USIv2 driver that handles various types of
serial communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple
drivers, as well as memory controller support for RZ/G2L
(R9A07G044).
- Apple M1 gains support for the PMGR power management driver
-----BEGIN PGP SIGNATURE-----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=tlZT
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
i.MX8MN display related domain support.
- Add optional continuous burst clock support for imx-weim bus driver.
- Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
MIX domain.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9dygUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7+jwgAle7/Po7Qs0JVrUwkJOWAjNxveXjv
keEC5o+svPOLIToX1lA+bY2CKlok2n6IIiEkpbgc+C+prTip0zJnJUFFHxuOeMkl
+/EWTthCAddLwXCdmU6c5HSw8XJ9rkH3YDvd46GkPnZuUiZVVmTYkuZQ25qCbPpE
f1kCg2RNVruZAOYHmMsoU+WMH3q40dvGSDVXbcHpNZ19qHooUyk/4jcXGlBJKXDo
iGosWLdqMy0vbK4cWFzorPFyTpaF1qq/o7AppfexT1h0f6aLnuKnBA5JXY4y4bvd
e+6EZ0VwvtdZBqMNaZLHqltCVA/Y0q2gXGryKUM6n7mGdv/LYictLHPudA==
=WKrF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=74GG
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.17:
- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
i.MX8MN display related domain support.
- Add optional continuous burst clock support for imx-weim bus driver.
- Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
MIX domain.
* tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
bus: imx-weim: optionally enable continuous burst clock
soc: imx: gpcv2: keep i.MX8MM VPU-H1 bus clock active
soc: imx: gpcv2: Synchronously suspend MIX domains
Link: https://lore.kernel.org/r/20211218071427.26745-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The find.h APIs are designed to be used only on unsigned long arguments.
This can technically result in a over-read, but it is harmless in this
case. Regardless, fix it to avoid the warning seen under -Warray-bounds,
which we'd like to enable globally:
In file included from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from ./include/linux/debugfs.h:15,
from drivers/bus/mhi/core/init.c:7:
drivers/bus/mhi/core/init.c: In function 'to_mhi_pm_state_str':
./include/linux/find.h:187:37: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'enum mhi_pm_state[1]' [-Warray-bounds]
187 | unsigned long val = *addr & GENMASK(size - 1, 0);
| ^~~~~
drivers/bus/mhi/core/init.c:80:51: note: while referencing 'state'
80 | const char *to_mhi_pm_state_str(enum mhi_pm_state state)
| ~~~~~~~~~~~~~~~~~~^~~~~
Link: https://lore.kernel.org/r/20211215232446.2069794-1-keescook@chromium.org
[mani: changed the variable name "bits" to "pm_state"]
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new API "mhi_prepare_for_transfer_autoqueue" for using with client
drivers like QRTR to request MHI core to autoqueue buffers for the DL
channel along with starting both UL and DL channels.
So far, the "auto_queue" flag specified by the controller drivers in
channel definition served this purpose but this will be removed at some
point in future.
Cc: netdev@vger.kernel.org
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During SYS_ERR condition, as a response to the MHI_RESET from host, some
devices tend to issue BHI interrupt without clearing the SYS_ERR state in
the device. This creates a race condition and causes a failure in booting
up the device.
The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR
handling in mhi_async_power_up(). Once the host detects that the device
is in SYS_ERR state, it issues MHI_RESET and waits for the device to
process the reset request. During this time, the device triggers the BHI
interrupt to the host without clearing SYS_ERR condition. So the host
starts handling the SYS_ERR condition again.
To fix this issue, let's register the IRQ handler only after handling the
SYS_ERR check to avoid getting spurious IRQs from the device.
Fixes: e18d4e9fa7 ("bus: mhi: core: Handle syserr during power_up")
Cc: stable@vger.kernel.org
Reported-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no reason for shutting down MHI ungracefully on freeze,
this causes the MHI host stack & device stack to not be aligned
anymore since the proper MHI reset sequence is not performed for
ungraceful shutdown.
Link: https://lore.kernel.org/r/1635268180-13699-1-git-send-email-loic.poulain@linaro.org
Fixes: 5f0c2ee1fe ("bus: mhi: pci-generic: Fix hibernation")
Cc: stable@vger.kernel.org
Suggested-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add new device ID 0xe0bf for T99W175.
This device ID is created because it is using Qualcomm SDX55 new base line.
Test evidence as below:
root@jbd-ThinkPad-P1-Gen-4:/dev# lspci -nn | grep Foxconn
0000:08:00.0 Wireless controller [0d40]: Foxconn International, Inc. Device [105b:e0bf]
root@jbd-ThinkPad-P1-Gen-4:/dev# cat wwan0at0 & echo -ne "ati\r" > wwan0at0
[2] 2977
root@jbd-ThinkPad-P1-Gen-4:/dev# ati
Manufacturer: Qualcomm
Model: T99W175
Revision: T99W175.F0.6.0.0.6.CC.005 1 [Oct 21 2021 10:00:00]
IMEI:
+GCAP: +CGSM
OK
Link: https://lore.kernel.org/r/20211029104918.3976-1-slark_xiao@163.com
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Storing a pointer to the MSI descriptor just to track the Linux interrupt
number is daft. Just store the interrupt number and be done with it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221815.207838579@linutronix.de
Use the common msi_index member and get rid of the pointless wrapper struct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221814.477386185@linutronix.de
Allocate the MSI device data on first invocation of the allocation function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221813.867985931@linutronix.de
The GMI bus on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now GMI must be resumed using
runtime PM API in order to initialize the GMI power state. Add runtime PM
and OPP support to the GMI driver.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For whatever reason, some devices like QCA6390, WCN6855 using ath11k
are not in M3 state during PM resume, but still functional. The
mhi_pm_resume should then not fail in those cases, and let the higher
level device specific stack continue resuming process.
Add an API mhi_pm_resume_force(), to force resuming irrespective of the
current MHI state. This fixes a regression with non functional ath11k WiFi
after suspend/resume cycle on some machines.
Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179
Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/
Fixes: 020d3b26c0 ("bus: mhi: Early MHI resume failure in non M3 state")
Cc: stable@vger.kernel.org #5.13
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[mani: Switched to API, added bug report, reported-by tags and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For Foxconn T99W175 device(sdx55 platform) in some host platform,
it would be unavailable once the host execute the err handler.
After checking, it's caused by the delay time too short to
get a successful reset.
Please see my test evidence as bewlow(BTW, I add some extra test logs
in function mhi_pci_reset_prepare and mhi_pci_reset_done):
When MHI_POST_RESET_DELAY_MS equals to 500ms:
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222477] mhi mhi0: Device MHI is not in valid state
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222628] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222631] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222632] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.839993] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.902063] mhi-pci-generic 0000:2d:00.0: reset failed
When MHI_POST_RESET_DELAY_MS equals to 1000ms or 1500ms:
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.067857] mhi mhi0: Device MHI is not in valid state
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068029] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068032] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068034] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607006] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607152] mhi mhi0: Requested to power ON
Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.302872] mhi mhi0: Failed to reset MHI due to syserr state
Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.303011] mhi-pci-generic 0000:2d:00.0: failed to power up MHI controller
When MHI_POST_RESET_DELAY_MS equals to 2000ms:
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180527] mhi mhi0: Failed to transition from PM state: Linkdown or Error Fatal Detect to: SYS ERROR Process
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180535] mhi mhi0: Device MHI is not in valid state
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180722] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180725] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180727] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230787] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230928] mhi mhi0: Requested to power ON
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.231173] mhi mhi0: Power on setup success
Nov 4 17:51:14 jbd-ThinkEdge kernel: [ 153.254747] mhi mhi0: Wait for device to enter SBL or Mission mode
I also tried big data like 3000, and it worked as well. 500ms may not be
enough for all support mhi device. We shall increase it to 2000ms
at least.
Link: https://lore.kernel.org/r/20211108113127.3938-1-slark_xiao@163.com
[mani: massaged commit message little bit, added Fixes tag and CCed stable]
Fixes: 8ccc3279fc ("mhi: pci_generic: Add support for reset")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211126104951.35685-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function sunxi_rsb_hw_exit() is sometimes called with pm runtime
disabled, so in such cases pm_runtime_resume() will fail with -EACCES.
Instead of doing whole dance of enabling pm runtime and thus clock just
to disable it again immediately, just check if disabling clock is
needed. That way calling pm_runtime_resume() is not needed at all.
Fixes: 4a0dbc12e6 ("bus: sunxi-rsb: Implement runtime power management")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211121083537.612473-1-jernej.skrabec@gmail.com
After making the brcmstb_gisb driver modular with 707a4cdf86 ("bus:
brcmstb_gisb: Allow building as module") Guenter reported that mips
allmodconfig failed to link because board_be_handler was referenced.
Thomas indicated that if we were to continue making the brcmstb_gisb
driver modular for MIPS we would need to introduce a function that
allows setting the board_be_handler and export that function towards
modules.
This is what is being done here: board_be_handler is made static and is
now settable with a mips_set_be_handler() function which is exported.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fixes: 707a4cdf86 ("bus: brcmstb_gisb: Allow building as module")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=AsTx
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
* tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio: (27 commits)
vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()
vfio/ccw: Pass vfio_ccw_private not mdev_device to various functions
vfio/ccw: Use functions for alloc/free of the vfio_ccw_private
vfio/ccw: Remove unneeded GFP_DMA
vfio: Use cdev_device_add() instead of device_create()
vfio: Use a refcount_t instead of a kref in the vfio_group
vfio: Don't leak a group reference if the group already exists
vfio: Do not open code the group list search in vfio_create_group()
vfio: Delete vfio_get/put_group from vfio_iommu_group_notifier()
vfio/pci: Add OpRegion 2.0+ Extended VBT support.
vfio/iommu_type1: remove IS_IOMMU_CAP_DOMAIN_IN_CONTAINER
vfio/iommu_type1: remove the "external" domain
vfio/iommu_type1: initialize pgsize_bitmap in ->open
vfio/spapr_tce: reject mediated devices
vfio: clean up the check for mediated device in vfio_iommu_type1
vfio: remove the unused mdev iommu hook
vfio: move the vfio_iommu_driver_ops interface out of <linux/vfio.h>
vfio: remove unused method from vfio_iommu_driver_ops
vfio: simplify iommu group allocation for mediated devices
vfio: remove the iommudata hack for noiommu groups
...
and improving logging.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYW0p4gAKCRDj7w1vZxhR
xQmwAPsFDSF9fDz1/75sF2FosGV2dPIOBCMUeNFbMesvBKlZMQD/WVAyu7jjiL7k
i3LThqHE8Jsefv0gqvu2nXaHfxuGmAo=
=yWZX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jasz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers
Some new drivers changes for the Allwinner SoCs, converting to a helper
and improving logging.
* tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sun50i-de2: Adjust printing error message
soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/ad0aa469-9e1b-4bb6-a116-92648ed774fa.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
5.16, please pull the following:
- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
devm_platform_ioremap_resource() helper
- Florian updates the Bus Interface Unit code to tune the 72116 and
72113 chips according to their existing counterparts. The GISB driver is
updated to be built as a non-removable module
-----BEGIN PGP SIGNATURE-----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=9x6r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Is9X
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoC drivers changes for
5.16, please pull the following:
- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
devm_platform_ioremap_resource() helper
- Florian updates the Bus Interface Unit code to tune the 72116 and
72113 chips according to their existing counterparts. The GISB driver is
updated to be built as a non-removable module
* tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Allow building as module
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72116
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72113
soc: bcm63xx-power: Make use of the helper function devm_platform_ioremap_resource()
soc: bcm: bcm-pmb: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/20211013174016.831348-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SRAM driver often returns -EPROBE_DEFER and thus this bus driver often
prints error message, even if it probes successfully later. This is
confusing for users and they often think that something is wrong.
Use dev_err_probe() helper for printing error message. It handles
-EPROBE_DEFER automatically.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211010071812.145178-1-jernej.skrabec@gmail.com
Fix drivers/bus/ti-sysc.c:2494:13: error: variable 'error' set but not
used introduced by commit 9d88136120 ("bus: ti-sysc: Add quirk handling
for reinit on context lost").
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 94f6345712 ("bus: ti-sysc: Implement quirk handling for
CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in
addition to dcan2 for errata i893 handling.
Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods"
dts property is used with related dcan hwmod data. This should be only
needed if anybody needs to git bisect earlier stable trees though.
Fixes: 94f6345712 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO")
Signed-off-by: Tony Lindgren <tony@atomide.com>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fw_devlink could end up creating device links for bus only devices.
However, bus only devices don't get probed and can block probe() or
sync_state() [1] call backs of other devices. To avoid this, probe these
devices using the simple-pm-bus driver.
However, there are instances of devices that are not simple buses (they get
probed by their specific drivers) that also list the "simple-bus" (or other
bus only compatible strings) in their compatible property to automatically
populate their child devices. We still want these devices to get probed by
their specific drivers. So, we make sure this driver only probes devices
that are only buses.
[1] - https://lore.kernel.org/lkml/CAPDyKFo9Bxremkb1dDrr4OcXSpE0keVze94Cm=zrkOVxHHxBmQ@mail.gmail.com/
Fixes: c442a0d187 ("driver core: Set fw_devlink to "permissive" behavior by default")
Cc: stable <stable@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Tested-by: Saravana Kannan <saravanak@google.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The open/reset/close commands format is similar for all objects.
Currently there are multiple implementations for these commands
scattered through various drivers. The code is cavsi-identical.
Create a generic implementation for the open/reset/close commands.
One of the consumer will be the VFIO driver which needs to
be able to reset a device.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210922110530.24736-1-diana.craciun@oss.nxp.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Allow building the Broadcom STB GISB arbiter driver as a module, however
similar to interrupt controller drivers, don't allow its unbind/removal
since it is not quite prepared for that and we want it to catch bus
errors all the time.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
There is no need for the legacy flag any longer for gpio as the omap-sham
driver has been fixed to not rely on pm_runtime_irq_safe().
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is no need for the legacy flag any longer for gpio as the gpio-omap
driver has been fixed to not rely on pm_runtime_irq_safe().
Signed-off-by: Tony Lindgren <tony@atomide.com>
Let's add handling the otg force idle quirk for the old omap2430 glue layer
used up to omap4 as the musb driver quirk only works if the driver is
loaded. Unlike with the am335x glue layer, looks like we don't need the
quirk handling for SYSC_QUIRK_REINIT_ON_CTX_LOST.
Eventually when all the musb using SoCs are booting with device tree based
configuration, we can just remove the related quirk handling from the
musb driver.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of
SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss
in a more generic way.
Signed-off-by: Tony Lindgren <tony@atomide.com>
At least on am335x, the gpmc module needs a re-init and reset if context
has been lost on resume. We can enable this for all gpmc revisions as we
check if the context was lost before restoring it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
At least am335x gpmc module needs a reset in addition to re-init on resume.
Let's add a quirk handling for reset on re-init.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some interconnect target modules such as otg and gpmc on am335x need a
re-init after resume. As we also have PM runtime cases where the context
may be lost, let's handle these all with cpu_pm.
For the am335x resume path, we already have cpu_pm_resume() call
cpu_pm_cluster_exit().
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is no need to restore context if it was not lost. Let's add a new
function sysc_check_context() to check for lost context. To make use of it,
we need to save the sysconfig register status on enable and disable.
Signed-off-by: Tony Lindgren <tony@atomide.com>
On resume we can get a warning at kernel/time/timekeeping.c:824 for
timekeeping_suspended.
Let's fix this by adding separate functions for sysc_poll_reset_sysstatus()
and sysc_poll_reset_sysconfig() and have the new functions handle also
timekeeping_suspended.
If iopoll at some point supports timekeeping_suspended, we can just drop
the custom handling from these functions.
Fixes: d46f9fbec7 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit")
Signed-off-by: Tony Lindgren <tony@atomide.com>
These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform
support and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhLz215t5GS2LDRf4RAjlHAJ473D0PymaTzv68EuPHThG+DEPifQCdGjLq
QGBB6JidIP8rtEdC+LWBB8I=
=M5+N
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here, notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanna labs driver updates in this pull request,
that will probably come later before -rc1 is out in a different request.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+Kyw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymlpACg0JM+hSeo8T5GtwZksZ1QXXQfh8sAoK6Dt6xF
e62OQuuMFT0Un0qOflZk
=emH+
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
This reverts commit 0092a1e3f7
This should be reverted in the char-misc-next branch to make merging
with Linus's branch possible due to issues with the mhi code that was
found in the networking tree.
Link: https://lore.kernel.org/r/20210827175852.GB15018@thinkpad
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: Hemant Kumar <hemantk@codeaurora.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current release - regressions:
- stmmac: revert "stmmac: align RX buffers"
- usb: asix: ax88772: move embedded PHY detection as early as possible
- usb: asix: do not call phy_disconnect() for ax88178
- Revert "net: really fix the build...", from Kalle to fix QCA6390
Current release - new code bugs:
- phy: mediatek: add the missing suspend/resume callbacks
Previous releases - regressions:
- qrtr: fix another OOB Read in qrtr_endpoint_post
- stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings
Previous releases - always broken:
- inet: use siphash in exception handling
- ip_gre: add validation for csum_start
- bpf: fix ringbuf helper function compatibility
- rtnetlink: return correct error on changing device netns
- e1000e: do not try to recover the NVM checksum on Tiger Lake
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ilTg
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from can and bpf.
Closing three hw-dependent regressions. Any fixes of note are in the
'old code' category. Nothing blocking release from our perspective.
Current release - regressions:
- stmmac: revert "stmmac: align RX buffers"
- usb: asix: ax88772: move embedded PHY detection as early as
possible
- usb: asix: do not call phy_disconnect() for ax88178
- Revert "net: really fix the build...", from Kalle to fix QCA6390
Current release - new code bugs:
- phy: mediatek: add the missing suspend/resume callbacks
Previous releases - regressions:
- qrtr: fix another OOB Read in qrtr_endpoint_post
- stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings
Previous releases - always broken:
- inet: use siphash in exception handling
- ip_gre: add validation for csum_start
- bpf: fix ringbuf helper function compatibility
- rtnetlink: return correct error on changing device netns
- e1000e: do not try to recover the NVM checksum on Tiger Lake"
* tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
Revert "net: really fix the build..."
net: hns3: fix get wrong pfc_en when query PFC configuration
net: hns3: fix GRO configuration error after reset
net: hns3: change the method of getting cmd index in debugfs
net: hns3: fix duplicate node in VLAN list
net: hns3: fix speed unknown issue in bond 4
net: hns3: add waiting time before cmdq memory is released
net: hns3: clear hardware resource when loading driver
net: fix NULL pointer reference in cipso_v4_doi_free
rtnetlink: Return correct error on changing device netns
net: dsa: hellcreek: Adjust schedule look ahead window
net: dsa: hellcreek: Fix incorrect setting of GCL
cxgb4: dont touch blocked freelist bitmap after free
ipv4: use siphash instead of Jenkins in fnhe_hashfun()
ipv6: use siphash in rt6_exception_hash()
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
net: usb: asix: ax88772: fix boolconv.cocci warnings
net/sched: ets: fix crash when flipping from 'strict' to 'quantum'
qede: Fix memset corruption
net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp
...
This reverts commit ce78ffa3ef.
Wren and Nicolas reported that ath11k was failing to initialise QCA6390
Wi-Fi 6 device with error:
qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22
Commit ce78ffa3ef ("net: really fix the build..."), introduced in
v5.14-rc5, caused this regression in qrtr. Most likely all ath11k
devices are broken, but I only tested QCA6390. Let's revert the broken
commit so that ath11k works again.
Reported-by: Wren Turkal <wt@penguintechs.org>
Reported-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two of the recent fixes for ti-sysc driver had bad interaction for a
function return value that caused one of the fixes to not work so we
need to change the return value handling. Otherwise early beagleboard
variants still have a boot issue.
-----BEGIN PGP SIGNATURE-----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=MPWH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NOnI
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fix for omap gpt12 timer error handling
Two of the recent fixes for ti-sysc driver had bad interaction for a
function return value that caused one of the fixes to not work so we
need to change the return value handling. Otherwise early beagleboard
variants still have a boot issue.
* tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix error handling for sysc_check_active_timer()
Link: https://lore.kernel.org/r/pull-1629354796-830948@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After commit a6d90e9f22 ("bus: ti-sysc: AM3: RNG is GP only"), clang
with -Wimplicit-fallthrough enabled warns:
drivers/bus/ti-sysc.c:2958:3: warning: unannotated fall-through between
switch labels [-Wimplicit-fallthrough]
default:
^
drivers/bus/ti-sysc.c:2958:3: note: insert 'break;' to avoid
fall-through
default:
^
break;
1 warning generated.
Clang's version of this warning is a little bit more pedantic than
GCC's. Add the missing break to satisfy it to match what has been done
all over the kernel tree.
Fixes: a6d90e9f22 ("bus: ti-sysc: AM3: RNG is GP only")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This code was intended to return an error code if regmap_read() fails
but the return statement was missing.
Fixes: 1c953bda90 ("bus: ixp4xx: Add a driver for IXP4xx expansion bus")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210807230016.3607666-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few ti-sysc changes to handle quirk for McASP SIDLE mode, correct
documentation for sysc_ioremap(), and start using
pm_runtime_resume_and_get().
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmELpDARHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPPzA//ZRy3FD+o8jS79w8yTrN2lzZqYzU3ioFr
5Uxp8pDvJG8toH8esBPtx0RxhnG11wnd3EKXlPrLnhJtvuzyS+J0LYCHKcWcCNR8
ptbDSeIVoaRzidfz7VRISSimpJ9zCo8p87ExxqgBTQrchj0e8g7pv0Z8bNZEzpAX
JeCLQeWrcYpHEOytvkf6VCs0w0xqZcUq2AZR8xVtHMFcHy/Y4A+bk/LnrM70GLZ8
Z2dGfPqAS5zAgb67nMrmsJ9cdCALQJrSD65lnKt4c9RJJeUKDCNgwdmHz0qBfyIr
ZhKwEtCwZkL//N0oTFId4kymniJelqHvJcx8bgxso6zYFb6CBtzEGU6+84SlF5JM
1htt0mPh7l/JZkUT1fFYhE0GU56xh0RNXTSJyS8o1vkAozjZ3j6e7cKBuG4ANUBf
VHSO65PFLh9m/wD1rT7xp0OxYZBn6Cczbg+zuexUtCEYLUjKBxDgGcEMAnbhjJIU
F5faisvSVgZt4EZ5bKfRX70suhB7KW4aadItAuiG6SrJYjtBt7aao9Z6SOdI2jsQ
jevhUr0cJwv+j7L3t/VCon2sfzgVOBljmQjCSq3huMGndOC7pdPi5pMQ3LMlAQlM
az8I5g7wtwXDPl0W2AbNjFRP3VU/HMx9vf6C//V3vhYcvJojBPqXYc0AaH6WxqXs
+ZPx4Vbgkbs=
=4Uzo
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fPmH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
Driver changes for ti-sysc for v5.15
Few ti-sysc changes to handle quirk for McASP SIDLE mode, correct
documentation for sysc_ioremap(), and start using
pm_runtime_resume_and_get().
* tag 'omap-for-v5.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Add quirk for OMAP4 McASP to disable SIDLE mode
bus: ti-sysc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
bus: ti-sysc: Correct misdocumentation of 'sysc_ioremap()'
bus: ti-sysc: Fix gpt12 system timer issue with reserved status
Link: https://lore.kernel.org/r/pull-1628153040-834155@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We have changed the return type for sysc_check_active_timer() from -EBUSY
to -ENXIO, but the gpt12 system timer fix still checks for -EBUSY. We are
also not returning on other errors like we did earlier as noted by
Pavel Machek <pavel@denx.de>.
Commit 3ff340e24c ("bus: ti-sysc: Fix gpt12 system timer issue with
reserved status") should have been updated for commit 65fb736761
("bus: ti-sysc: suppress err msg for timers used as clockevent/source").
Let's fix the issue by checking for -ENXIO and returning on any other
errors as suggested by Pavel Machek <pavel@denx.de>.
Fixes: 3ff340e24c ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status")
Depends-on: 65fb736761 ("bus: ti-sysc: suppress err msg for timers used as clockevent/source")
Reported-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For the smartreflex device, we need to disable smartreflex on SoC idle,
and have been using pm_runtime_irq_safe() to do that. But we want to
remove the irq_safe usage as PM runtime takes a permanent usage count
on the parent device with it.
In order to remove the need for pm_runtime_irq_safe(), let's gate
the clock directly in the driver. This removes the need to call PM runtime
during idle, and allows us to switch to using CPU_PM in the following
patch.
Note that the smartreflex interconnect target module is configured for smart
idle, but the clock does not have autoidle capability, and needs to be gated
manually. If the clock supported autoidle, we would not need to even gate
the clock.
With this change, we can now remove the related quirk flags for ti-sysc
also.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
We need the fixes in here as well, and resolves some merge issues with
the mhi codebase.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lots of small fixes for Arm SoCs this time, nothing
too worrying:
- omap/beaglebone boot regression fix in gpt12 timer
- revert for i.mx8 soc driver breaking as a platform_driver
- kexec/kdump fixes for op-tee
- various fixes for incorrect DT settings on imx, mvebu, omap,
stm32, and tegra causing problems.
- device tree fixes for static checks in nomadik, versatile, stm32
- code fixes for issues found in build testing and with static
checking on tegra, ixp4xx, imx, omap
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=h0YB
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Lots of small fixes for Arm SoCs this time, nothing too worrying:
- omap/beaglebone boot regression fix in gpt12 timer
- revert for i.mx8 soc driver breaking as a platform_driver
- kexec/kdump fixes for op-tee
- various fixes for incorrect DT settings on imx, mvebu, omap, stm32,
and tegra causing problems.
- device tree fixes for static checks in nomadik, versatile, stm32
- code fixes for issues found in build testing and with static
checking on tegra, ixp4xx, imx, omap"
* tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
soc: ixp4xx/qmgr: fix invalid __iomem access
soc: ixp4xx: fix printing resources
ARM: ixp4xx: goramo_mlr depends on old PCI driver
ARM: ixp4xx: fix compile-testing soc drivers
soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR
ARM: dts: nomadik: Fix up interrupt controller node names
ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
ARM: dts: am437x-l4: fix typo in can@0 node
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
bus: ti-sysc: AM3: RNG is GP only
ARM: omap2+: hwmod: fix potential NULL pointer access
arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode
arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
...
Build failure in drivers/net/wwan/mhi_wwan_mbim.c:
add missing parameter (0, assuming we don't want buffer pre-alloc).
Conflict in drivers/net/dsa/sja1105/sja1105_main.c between:
589918df93 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
0fac6aa098 ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode")
Follow the instructions from the commit message of the former commit
- removed the if conditions. When looking at commit 589918df93 ("net:
dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
note that the mask_iotag fields get removed by the following patch.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve error message to be more descriptive if a failure occurs
with an invalid power up execution environment. Additionally, add
a debug log to print the execution environment and MHI state
before a power up is attempted to confirm if the device is in an
expected state. This helps clarify reasons for power up failures
such as the device being found in a PBL or Emergency Download
Mode execution environment and the host expected a full power up
with Pass-Through and no image loading involved.
Link: https://lore.kernel.org/r/1620072038-36160-1-git-send-email-bbhatt@codeaurora.org
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is nothing special done within the mhi_alloc_coherent() and
the mhi_free_coherent() wrapper functions. They only directly
call the equivalent DMA allocation functions. Replace them with
the original function calls such that the implementation is clear
and direct.
Link: https://lore.kernel.org/r/1624392428-9328-1-git-send-email-bbhatt@codeaurora.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When obtaining the BHI or BHIe offsets during the power up
preparation phase, range checks are missing. These can help
controller drivers avoid accessing any address outside of the
MMIO region. Ensure that mhi_cntrl->reg_len is set before MHI
registration as it is a required field and range checks will
fail without it.
Link: https://lore.kernel.org/r/1620330705-40192-7-git-send-email-bbhatt@codeaurora.org
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MHI driver requires register space length to add range checks and
prevent memory region accesses outside of that for MMIO space.
Set it from the PCI generic controller driver before registering
the MHI controller.
Link: https://lore.kernel.org/r/1620330705-40192-6-git-send-email-bbhatt@codeaurora.org
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the BHI and BHIe pointers to NULL as part of clean-up. This
makes sure that stale pointers are not accessed after powering
MHI down.
Link: https://lore.kernel.org/r/1620330705-40192-3-git-send-email-bbhatt@codeaurora.org
Suggested-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the BHI and/or BHIe offsets in mhi_prepare_for_power_up(),
rearrange the function, and remove the equivalent from
mhi_async_power_up(). This helps consolidate multiple checks
in different parts of the driver and can help MHI fail early on
before power up begins if the offsets are not read correctly.
Link: https://lore.kernel.org/r/1620330705-40192-2-git-send-email-bbhatt@codeaurora.org
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the MHI controller driver defines which channels should
have their inbound buffers allocated and queued. But ideally, this is
something that should be decided by the MHI device driver instead,
which actually deals with that buffers.
Add a flag parameter to mhi_prepare_for_transfer allowing to specify
if buffers have to be allocated and queued by the MHI stack.
Keep auto_queue flag for now, but should be removed at some point.
Link: https://lore.kernel.org/r/1624566520-20406-1-git-send-email-loic.poulain@linaro.org
Tested-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taregeted for v5.15:
- Add DT bindings to the expansion bus and PATA libata driver.
- Add a new expansion bus driver.
- Rewrite the watchdog driver to use the watchdog core and
spawn from the timer (clocksource) driver.
- Refactor the PATA/libata driver to probe from the device
tree and use the expansion bus driver to manipulate chip
select timings directly.
-----BEGIN PGP SIGNATURE-----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=v2E7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2bLl
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-drivers-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/drivers
IXP4xx driver updates for modernizing the IXP4xx platforms,
taregeted for v5.15:
- Add DT bindings to the expansion bus and PATA libata driver.
- Add a new expansion bus driver.
- Rewrite the watchdog driver to use the watchdog core and
spawn from the timer (clocksource) driver.
- Refactor the PATA/libata driver to probe from the device
tree and use the expansion bus driver to manipulate chip
select timings directly.
* tag 'ixp4xx-drivers-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
pata: ixp4xx: Rewrite to use device tree
pata: ixp4xx: Add DT bindings
pata: ixp4xx: Refer to cmd and ctl rather than csN
pata: ixp4xx: Use IS_ENABLED() to determine endianness
pata: ixp4xx: Use local dev variable
watchdog: ixp4xx: Rewrite driver to use core
bus: ixp4xx: Add a driver for IXP4xx expansion bus
bus: ixp4xx: Add DT bindings for the IXP4xx expansion bus
Link: https://lore.kernel.org/r/CACRpkdZaCosXsgp02nuUbd_nEvdxm5-z0+d0oSA97UTWQ0RQQg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Intel IXP4xx SoCs have an expansion bus that is usually just
used for flash memory and configured by the boot loaders and can
be accessed using the "simple-bus".
However some devices need more elaborate configuration and then we
need to provide a proper 3-unit address space indicating chip
select for each device and provide timing and similar information.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In case of a switch DPAA2 object, the interface ID is also needed when
querying for the object endpoint. Extend fsl_mc_get_endpoint() so that
users can also pass the interface ID that are interested in.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some fixes for regressions and boot issues for various devices:
- Fix gpt12 system timer regression on earlier beagleboard revisions
- Fix potential NULL pointer access for omap_hwmod_get_pwrdm()
- Disable RNG on secure am335x variants as it's not accessible
- Fix flakey DCDC2 voltage causing hangs on am43x-epos-evm by reducing
i2c0 bus speed for tps65218
- Fix typo for am437x-l4 can@0 node
- Fix omap5 regression caused by vdds_1v8_main fixed-regulator
-----BEGIN PGP SIGNATURE-----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=Ismq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2UNB
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.14-rc series
Some fixes for regressions and boot issues for various devices:
- Fix gpt12 system timer regression on earlier beagleboard revisions
- Fix potential NULL pointer access for omap_hwmod_get_pwrdm()
- Disable RNG on secure am335x variants as it's not accessible
- Fix flakey DCDC2 voltage causing hangs on am43x-epos-evm by reducing
i2c0 bus speed for tps65218
- Fix typo for am437x-l4 can@0 node
- Fix omap5 regression caused by vdds_1v8_main fixed-regulator
* tag 'omap-for-v5.14/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
ARM: dts: am437x-l4: fix typo in can@0 node
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
bus: ti-sysc: AM3: RNG is GP only
ARM: omap2+: hwmod: fix potential NULL pointer access
bus: ti-sysc: Fix gpt12 system timer issue with reserved status
Link: https://lore.kernel.org/r/pull-1627995895-406133@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The McASP module in OMAP4 does not work if the SIDLE mode is enabled, most
like due to module integration issue that the signaling is not working
correctly.
Add a quirk for the module to select only NOIDLE mode when it is in use.
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Make the RNG on AM3 GP only.
Based on this patch from TI v5.4 tree which is based on hwmod data
which are now removed:
| ARM: AM43xx: hwmod: Move RNG to a GP only links table
|
| On non-GP devices the RNG is controlled by the secure-side software,
| like in DRA7xx hwmod we should not control this IP when we are not
| a GP device.
|
| Signed-off-by: Andrew F. Davis <afd@ti.com>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some versions of the MC firmware wrongly report 0 for register base
address of the DPMCP associated with child DPRC objects thus rendering
them unusable. This is particularly troublesome in ACPI boot scenarios
where the legacy way of extracting this base address from the device
tree does not apply.
Given that DPMCPs share the same base address, workaround this by using
the base address extracted from the root DPRC container.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-8-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the endpoint of a device is not yet probed on the bus, force
a rescan of the devices and retry to get a reference to the
endpoint device. If the device is still not found then we assume
it's in a different isolation context (container/DPRC) thus
unavailable and return a permission error.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-7-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pause the MC firmware when unloading the driver so that it doesn't
crash in certain scenarios, such as kexec.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-6-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a bus notifier to pause the MC firmware as soon as its device
gets discovered. This is needed as the firmware is live thus, as soon
as the SMMU gets probed and enabled, it will crash the firmware due to
SMMU context faults. The firmware will be resumed at probe time, after
the required IOMMU setup was completed.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-5-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fsl-mc bus driver is missing the .shutdown() callback, so add it.
The implementation simply calls the .remove() callback.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-4-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MC firmware has two execution units. Resume them both, as on some
Layerscape SoCs not doing so breaks the firmware.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-3-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI DMA configure API may return a defer status code, so handle it.
On top of this, move the MC firmware resume after the DMA setup
is completed to avoid crashing due to DMA setup not being done yet or
being deferred.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-2-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Second parameter of dprc_scan_objects() is a bool not a pointer
so change from NULL to false.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-1-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MHI reads the channel ID from the event ring element sent by the
device which can be any value between 0 and 255. In order to
prevent any out of bound accesses, add a check against the maximum
number of channels supported by the controller and those channels
not configured yet so as to skip processing of that event ring
element.
Link: https://lore.kernel.org/r/1624558141-11045-1-git-send-email-bbhatt@codeaurora.org
Fixes: 1d3173a3ba ("bus: mhi: core: Add support for processing events from client device")
Cc: stable@vger.kernel.org #5.10
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210716075106.49938-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices such as SDX24 do not have the provision for inband wake
doorbell in the form of channel 127 and instead have a sideband
GPIO for it. Newer devices such as SDX55 or SDX65 support inband
wake method by default. Ensure the functionality is used based on
this such that device wake stays held when a client driver uses
mhi_device_get() API or the equivalent debugfs entry.
Link: https://lore.kernel.org/r/1624560809-30610-1-git-send-email-bbhatt@codeaurora.org
Fixes: e3e5e6508f ("bus: mhi: pci_generic: No-Op for device_wake operations")
Cc: stable@vger.kernel.org #5.12
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210716075106.49938-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MRU value used by the MHI MBIM network interface affects
the throughput performance of the interface. Different modem
models use different default MRU sizes based on their bandwidth
capabilities. Large values generally result in higher throughput
for larger packet sizes.
In addition if the MRU used by the MHI device is larger than that
specified in the MHI net device the data is fragmented and needs
to be re-assembled which generates a (single) warning message about
the fragmented packets. Setting the MRU on both ends avoids the
extra processing to re-assemble the packets.
This patch allows the documented MRU for a modem to be automatically
set as the MHI net device MRU avoiding fragmentation and improving
throughput performance.
Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller
driver cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining
management interfaces and communication (including bus model)
between partitions both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal
with identity mappings at boot and integration with ARM SMMU
pieces.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAmDokgYPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3looP/20uQAjRadPJFdV/B2mpZYqXMI4dIN9g7KJ1
6uEoaGurzYWQQreDXswQ5vFUcQfIudEJ9Im9IF+9BUsFQ2uvPTJ4I+HDN++WH70B
cIsmwwBr7Q4JUVP+O7T2WGtBY69jvHTpJrCCVtyHtwEyL4a1uyfelsAJXbxqaqis
w1lmXNkkSqx5c67H3maNNDRnbutyLL2gO0TYdiBapOcc5V03OYKNnMbDqRTddqyt
4UH4eYkFkNai8UJ476BXHU9ldlWzEkRBib/OKwF9k3oPj9W3kdQ/vd2IKK5a1fTX
jIbOPSRRC8K/9Bxn1KEtdoU0Yy+rlm3xd7DtQl5RyGTD+tHVq3dN55WjoXBY83Yh
r37y7uII9i09tPg5+APSX/jgodsIt4c46dKwvYuWXvB7ziomfsKxQiRanApJG6UX
qS5NCUrlfYWlL302JOTvEtDBePXXiXQ065GuRjM948WMnVzXwEKwYUakGhvXQWMS
jXCcOGW7GhnbY3+Ipn9chyhydHpKSxIb8oBk4cMRJU9jlN2GmjHgW8RMvT2WM6VF
1F8acyMvf6en5tV6f23cjbW+iIMTS5egKNfqi8tdjGVxbowypyJYzjYOhaqk6veJ
jHOmpglTXas0QD3ZRU7vGVlrvHqik8XyRsq3N9CQjVenRCbsQLKZRi1gTbIuspcR
rejqH3Fs
=kPg8
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanna driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems mushed
together" tree...
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM8jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymECgCg0yL+8WxDKO5Gg5llM5PshvLB1rQAn0y5pDgg
nw78LV3HQ0U7qaZBtI91
=x+AR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During system resume, MHI host triggers M3->M0 transition and then waits
for target device to enter M0 state. Once done, the device queues a state
change event into ctrl event ring and notifies MHI host by raising an
interrupt, where a tasklet is scheduled to process this event. In most
cases, the tasklet is served timely and wait operation succeeds.
However, there are cases where CPU is busy and cannot serve this tasklet
for some time. Once delay goes long enough, the device moves itself to M1
state and also interrupts MHI host after inserting a new state change
event to ctrl ring. Later when CPU finally has time to process the ring,
there will be two events:
1. For M3->M0 event, which is the first event to be processed queued first.
The tasklet handler serves the event, updates device state to M0 and
wakes up the task.
2. For M0->M1 event, which is processed later, the tasklet handler
triggers M1->M2 transition and updates device state to M2 directly,
then wakes up the MHI host (if it is still sleeping on this wait queue).
Note that although MHI host has been woken up while processing the first
event, it may still has no chance to run before the second event is
processed. In other words, MHI host has to keep waiting till timeout
causing the M0 state to be missed.
kernel log here:
...
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.911251] mhi 0000:06:00.0: Entered with PM state: M3, MHI state: M3
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917762] mhi 0000:06:00.0: State change event to state: M0
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917767] mhi 0000:06:00.0: State change event to state: M1
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4338.788231] mhi 0000:06:00.0: Did not enter M0 state, MHI state: M2, PM state: M2
...
Fix this issue by simply adding M2 as a valid state for resume.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Cc: stable@vger.kernel.org
Fixes: 0c6b20a1d7 ("bus: mhi: core: Add support for MHI suspend and resume")
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210524040312.14409-1-bqiang@codeaurora.org
[mani: slightly massaged the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210621161616.77524-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On graceful power-down/disable transition, when an MHI reset is
performed, the MHI device loses its context, including interrupt
configuration. However, the current implementation is waiting for
event(irq) driven state change to confirm reset has been completed,
which never happens, and causes reset timeout, leading to unexpected
high latency of the mhi_power_down procedure (up to 45 seconds).
Fix that by moving to the recently introduced poll_reg_field method,
waiting for the reset bit to be cleared, in the same way as the
power_on procedure.
Cc: stable@vger.kernel.org
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Link: https://lore.kernel.org/r/1620029090-8975-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210621161616.77524-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/mc-io.c:70: warning: Function parameter or member 'dpmcp_dev' not described in 'fsl_create_mc_io'
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/fsl-mc-msi.c:164: warning: Function parameter or member 'fwnode' not described in 'fsl_mc_msi_create_irq_domain'
drivers/bus/fsl-mc/fsl-mc-msi.c:164: warning: Excess function parameter 'np' description in 'fsl_mc_msi_create_irq_domain'
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/fsl-mc-allocator.c:271: warning: Function parameter or member 'new_mc_adev' not described in 'fsl_mc_object_allocate'
drivers/bus/fsl-mc/fsl-mc-allocator.c:271: warning: Excess function parameter 'new_mc_dev' description in 'fsl_mc_object_allocate'
drivers/bus/fsl-mc/fsl-mc-allocator.c:417: warning: Function parameter or member 'mc_bus_dev' not described in 'fsl_mc_cleanup_irq_pool'
drivers/bus/fsl-mc/fsl-mc-allocator.c:417: warning: expecting prototype for Teardown the interrupt pool associated with an fsl(). Prototype was for fsl_mc_cleanup_irq_pool() instead
drivers/bus/fsl-mc/fsl-mc-allocator.c:443: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocate_irqs'
drivers/bus/fsl-mc/fsl-mc-allocator.c:443: warning: expecting prototype for Allocate the IRQs required by a given fsl(). Prototype was for fsl_mc_allocate_irqs() instead
drivers/bus/fsl-mc/fsl-mc-allocator.c:586: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocator_probe'
drivers/bus/fsl-mc/fsl-mc-allocator.c:618: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocator_remove'
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/dprc-driver.c:360: warning: Function parameter or member 'alloc_interrupts' not described in 'dprc_scan_container'
drivers/bus/fsl-mc/dprc-driver.c:383: warning: Function parameter or member 'irq_num' not described in 'dprc_irq0_handler'
drivers/bus/fsl-mc/dprc-driver.c:383: warning: Excess function parameter 'irq' description in 'dprc_irq0_handler'
drivers/bus/fsl-mc/dprc-driver.c:394: warning: Function parameter or member 'irq_num' not described in 'dprc_irq0_handler_thread'
drivers/bus/fsl-mc/dprc-driver.c:394: warning: Excess function parameter 'irq' description in 'dprc_irq0_handler_thread'
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/dprc.c:345: warning: Function parameter or member 'attr' not described in 'dprc_get_attributes'
drivers/bus/fsl-mc/dprc.c:521: warning: Function parameter or member 'obj_type' not described in 'dprc_get_obj_region'
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/fsl-mc-bus.c:30: warning: expecting prototype for Default DMA mask for devices on a fsl(). Prototype was for FSL_MC_DEFAULT_DMA_MASK() instead
drivers/bus/fsl-mc/fsl-mc-bus.c:45: warning: Function parameter or member 'fsl_mc_regs' not described in 'fsl_mc'
drivers/bus/fsl-mc/fsl-mc-bus.c:124: warning: Function parameter or member 'dev' not described in 'fsl_mc_bus_uevent'
drivers/bus/fsl-mc/fsl-mc-bus.c:124: warning: Function parameter or member 'env' not described in 'fsl_mc_bus_uevent'
drivers/bus/fsl-mc/fsl-mc-bus.c:480: warning: Function parameter or member 'mc_driver' not described in '__fsl_mc_driver_register'
drivers/bus/fsl-mc/fsl-mc-bus.c:480: warning: Function parameter or member 'owner' not described in '__fsl_mc_driver_register'
drivers/bus/fsl-mc/fsl-mc-bus.c:511: warning: Function parameter or member 'mc_driver' not described in 'fsl_mc_driver_unregister'
drivers/bus/fsl-mc/fsl-mc-bus.c:571: warning: Function parameter or member 'dev' not described in 'fsl_mc_get_root_dprc'
drivers/bus/fsl-mc/fsl-mc-bus.c:571: warning: Function parameter or member 'root_dprc_dev' not described in 'fsl_mc_get_root_dprc'
drivers/bus/fsl-mc/fsl-mc-bus.c:739: warning: Function parameter or member 'dev' not described in 'fsl_mc_is_root_dprc'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'obj_desc' not described in 'fsl_mc_device_add'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'mc_io' not described in 'fsl_mc_device_add'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'parent_dev' not described in 'fsl_mc_device_add'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'new_mc_dev' not described in 'fsl_mc_device_add'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: expecting prototype for Add a newly discovered fsl(). Prototype was for fsl_mc_device_add() instead
drivers/bus/fsl-mc/fsl-mc-bus.c:1066: warning: Function parameter or member 'pdev' not described in 'fsl_mc_bus_probe'
drivers/bus/fsl-mc/fsl-mc-bus.c:1190: warning: Function parameter or member 'pdev' not described in 'fsl_mc_bus_remove'
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/mc-sys.c:20: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/bus/fsl-mc/mc-sys.c:151: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/bus/fsl-mc/mc-sys.c:197: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/bus/fsl-mc/mc-sys.c:237: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/mc-io.c:53: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/bus/fsl-mc/mc-io.c:126: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-1-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small misc driver fixes for 5.13-rc6 that fix some
reported problems:
- Tiny phy driver fixes for reported issues
- rtsx regression for when the device suspended
- mhi driver fix for a use-after-free
All of these have been in linux-next for a few days with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYMTXVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzLgCgpTYm7sEdpzqTZtJXupSP05Kqm5gAn3PhELhK
ZPnUMX9OPV9DPnJ9camz
=ApcR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small misc driver fixes for 5.13-rc6 that fix some
reported problems:
- Tiny phy driver fixes for reported issues
- rtsx regression for when the device suspended
- mhi driver fix for a use-after-free
All of these have been in linux-next for a few days with no reported
issues"
* tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
bus: mhi: pci-generic: Fix hibernation
bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
bus: mhi: pci_generic: T99W175: update channel name from AT to DUN
phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
phy: ti: Fix an error code in wiz_probe()
phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
phy: usb: Fix misuse of IS_ENABLED
Using pm_runtime_resume_and_get is more appropriate
for simplifing code.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fixes the following W=1 kernel build warning(s):
drivers/bus/ti-sysc.c:867: warning: expecting prototype for syc_ioremap(). Prototype was for sysc_ioremap() instead
Cc: Tony Lindgren <tony@atomide.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula <jarkko.nikula@bitmer.com> reported that Beagleboard
revision c2 stopped booting. Jarkko bisected the issue down to
commit 6cfcd5563b ("clocksource/drivers/timer-ti-dm: Fix suspend
and resume for am3 and am4").
Let's fix the issue by tagging system timers as reserved rather than
ignoring them. And let's not probe any interconnect target module child
devices for reserved modules.
This allows PM runtime to keep track of clocks and clockdomains for
the interconnect target module, and prevent the system timer from idling
as we already have SYSC_QUIRK_NO_IDLE and SYSC_QUIRK_NO_IDLE_ON_INIT
flags set for system timers.
Fixes: 6cfcd5563b ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4")
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch fixes crash after resuming from hibernation. The issue
occurs when mhi stack is builtin and so part of the 'restore-kernel',
causing the device to be resumed from 'restored kernel' with a no
more valid context (memory mappings etc...) and leading to spurious
crashes.
This patch fixes the issue by implementing proper freeze/restore
callbacks.
Link: https://lore.kernel.org/r/1622571445-4505-1-git-send-email-loic.poulain@linaro.org
Reported-by: Shujun Wang <wsj20369@163.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Link: https://lore.kernel.org/r/20210413160318.2003699-1-weiyongjun1@huawei.com
Fixes: 8562d4fe34 ("mhi: pci_generic: Add health-check")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Hemant kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to MHI v1.1 specification, change the channel name of T99W175
from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33,
so that the channels can be bound to the Qcom WWAN control driver, and
device node such as /dev/wwan0p3DUN will be generated, which is very useful
for debugging modem
Link: https://lore.kernel.org/r/20210429014226.21017-1-jarvis.w.jiang@gmail.com
[mani: changed the dev node to /dev/wwan0p3DUN]
Fixes: aac426562f ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam