Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:
============================================
WARNING: possible recursive locking detected
6.7.0-rc3+ #598 Not tainted
--------------------------------------------
swapper/2/0 is trying to acquire lock:
ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
but task is already holding lock:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sch->q.lock);
lock(&sch->q.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by swapper/2/0:
#0: ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
#1: ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
#2: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
#3: ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
#4: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x4a/0x80
__lock_acquire+0xfdd/0x3150
lock_acquire+0x1ca/0x540
_raw_spin_lock+0x34/0x80
__dev_queue_xmit+0x1560/0x2e70
tcf_mirred_act+0x82e/0x1260 [act_mirred]
tcf_action_exec+0x161/0x480
tcf_classify+0x689/0x1170
prio_enqueue+0x316/0x660 [sch_prio]
dev_qdisc_enqueue+0x46/0x220
__dev_queue_xmit+0x1615/0x2e70
ip_finish_output2+0x1218/0x1ed0
__ip_finish_output+0x8b3/0x1350
ip_output+0x163/0x4e0
igmp_ifc_timer_expire+0x44b/0x930
call_timer_fn+0x1a2/0x510
run_timer_softirq+0x54d/0x11a0
__do_softirq+0x1b3/0x88f
irq_exit_rcu+0x18f/0x1e0
sysvec_apic_timer_interrupt+0x6f/0x90
</IRQ>
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
CC: Maxim Mikityanskiy <maxim@isovalent.com>
CC: Xiumei Mu <xmu@redhat.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No functional change intended, aliases will be used in followup commits.
Note for backporters: you may need to add aliases also for modules that
are already removed in mainline kernel but still in your version.
Patches were generated with the help of Coccinelle scripts like:
cat >scripts/coccinelle/misc/tcf_alias.cocci <<EOD
virtual patch
virtual report
@ haskernel @
@@
@ tcf_has_kind depends on report && haskernel @
identifier ops;
constant K;
@@
static struct tcf_proto_ops ops = {
.kind = K,
...
};
+char module_alias = K;
EOD
/usr/bin/spatch -D report --cocci-file scripts/coccinelle/misc/tcf_alias.cocci \
--dir . \
-I ./arch/x86/include -I ./arch/x86/include/generated -I ./include \
-I ./arch/x86/include/uapi -I ./arch/x86/include/generated/uapi \
-I ./include/uapi -I ./include/generated/uapi \
--include ./include/linux/compiler-version.h --include ./include/linux/kconfig.h \
--jobs 8 --chunksize 1 2>/dev/null | \
sed 's/char module_alias = "\([^"]*\)";/MODULE_ALIAS_NET_CLS("\1");/'
And analogously for:
static struct tc_action_ops ops = {
.kind = K,
static struct Qdisc_ops ops = {
.id = K,
(Someone familiar would be able to fit those into one .cocci file
without sed post processing.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201130943.19536-3-mkoutny@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Fill in missing MODULE_DESCRIPTIONs for TC qdiscs.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-4-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'filter_cnt' counter is used to control a Qdisc class lifetime.
Each filter referecing this class by its id will eventually
increment/decrement this counter in their respective
'add/update/delete' routines.
As these operations are always serialized under rtnl lock, we don't
need an atomic type like 'refcount_t'.
It also means that we lose the overflow/underflow checks already
present in refcount_t, which are valuable to hunt down bugs
where the unsigned counter wraps around as it aids automated tools
like syzkaller to scream in such situations.
Wrap the open coded increment/decrement into helper functions and
add overflow checks to the operations.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current implementation of HTB offload returns the EINVAL error for
quantum parameter. This patch removes the error returning checks for
'quantum' parameter and populates its value to tc_htb_qopt_offload
structure such that driver can use the same.
Add quantum parameter check in mlx5 driver, as mlx5 devices are not capable
of supporting the quantum parameter when htb offload is used. Report error
if quantum parameter is set to a non-default value.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation of HTB offload returns the EINVAL error
for unsupported parameters like prio and quantum. This patch removes
the error returning checks for 'prio' parameter and populates its
value to tc_htb_qopt_offload structure such that driver can use the
same.
Add prio parameter check in mlx5 driver, as mlx5 devices are not capable
of supporting the prio parameter when htb offload is used. Report error
if prio parameter is set to a non-default value.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Co-developed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some error messages are still being printed to dmesg.
Since extack is available, provide error messages there.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The > needs be >= to prevent an out of bounds access.
Fixes: de5ca4c385 ("net: sched: sch: Bounds check priority")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/Y+D+KN18FQI2DKLq@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing was explicitly bounds checking the priority index used to access
clpriop[]. WARN and bail out early if it's pathological. Seen with GCC 13:
../net/sched/sch_htb.c: In function 'htb_activate_prios':
../net/sched/sch_htb.c:437:44: warning: array subscript [0, 31] is outside array bounds of 'struct htb_prio[8]' [-Warray-bounds=]
437 | if (p->inner.clprio[prio].feed.rb_node)
| ~~~~~~~~~~~~~~~^~~~~~
../net/sched/sch_htb.c:131:41: note: while referencing 'clprio'
131 | struct htb_prio clprio[TC_HTB_NUMPRIO];
| ^~~~~~
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20230127224036.never.561-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Peek at old qdisc and graft only when deleting a leaf class in the htb,
rather than when deleting the htb itself. Do not peek at the qdisc of the
netdev queue when destroying the htb. The caller may already have grafted a
new qdisc that is not part of the htb structure being destroyed.
This fix resolves two use cases.
1. Using tc to destroy the htb.
- Netdev was being prematurely activated before the htb was fully
destroyed.
2. Using tc to replace the htb with another qdisc (which also leads to
the htb being destroyed).
- Premature netdev activation like previous case. Newly grafted qdisc
was also getting accidentally overwritten when destroying the htb.
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230113005528.302625-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix W=1 kernel-doc warning:
net/sched/sch_htb.c:214: warning: expecting prototype for htb_classify(). Prototype was for HTB_DIRECT() instead
by moving the HTB_DIRECT() macro above the function.
Add kernel-doc notation for function parameters as well.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
use tc_qdisc_stats_dump() in qdisc.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If htb_init() fails, qdisc_create() invokes htb_destroy() to clear
resources. Therefore, remove redundant resource cleanup in htb_init().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The memory allocated by using kzallloc_node and kcalloc has been cleared.
Therefore, the structure members of the new qdisc are 0. So there's no
need to explicitly assign a value of 0.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qdisc_reset() is clearing qdisc->q.qlen and qdisc->qstats.backlog
_after_ calling qdisc->ops->reset. There is no need to clear them
again in the specific reset function.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220824005231.345727-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current implementation of HTB offload doesn't support some
parameters. Instead of ignoring them, actively return the EINVAL error
when they are set to non-defaults.
As this patch goes to stable, the driver API is not changed here. If
future drivers support more offload parameters, the checks can be moved
to the driver side.
Note that the buffer and cbuffer parameters are also not supported, but
the tc userspace tool assigns some default values derived from rate and
ceil, and identifying these defaults in sch_htb would be unreliable, so
they are still ignored.
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220125100654.424570-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to make the "Operation not supported" message clearer to the
user, add extack messages explaining why exactly adding offloaded HTB
could be not supported in each case.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Qdisc::running sequence counter has two uses:
1. Reliably reading qdisc's tc statistics while the qdisc is running
(a seqcount read/retry loop at gnet_stats_add_basic()).
2. As a flag, indicating whether the qdisc in question is running
(without any retry loops).
For the first usage, the Qdisc::running sequence counter write section,
qdisc_run_begin() => qdisc_run_end(), covers a much wider area than what
is actually needed: the raw qdisc's bstats update. A u64_stats sync
point was thus introduced (in previous commits) inside the bstats
structure itself. A local u64_stats write section is then started and
stopped for the bstats updates.
Use that u64_stats sync point mechanism for the bstats read/retry loop
at gnet_stats_add_basic().
For the second qdisc->running usage, a __QDISC_STATE_RUNNING bit flag,
accessed with atomic bitops, is sufficient. Using a bit flag instead of
a sequence counter at qdisc_run_begin/end() and qdisc_is_running() leads
to the SMP barriers implicitly added through raw_read_seqcount() and
write_seqcount_begin/end() getting removed. All call sites have been
surveyed though, and no required ordering was identified.
Now that the qdisc->running sequence counter is no longer used, remove
it.
Note, using u64_stats implies no sequence counter protection for 64-bit
architectures. This can lead to the qdisc tc statistics "packets" vs.
"bytes" values getting out of sync on rare occasions. The individual
values will still be valid.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only factor differentiating per-CPU bstats data type (struct
gnet_stats_basic_cpu) from the packed non-per-CPU one (struct
gnet_stats_basic_packed) was a u64_stats sync point inside the former.
The two data types are now equivalent: earlier commits added a u64_stats
sync point to the latter.
Combine both data types into "struct gnet_stats_basic_sync". This
eliminates redundancy and simplifies the bstats read/write APIs.
Use u64_stats_t for bstats "packets" and "bytes" data types. On 64-bit
architectures, u64_stats sync points do not use sequence counter
protection.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Qdisc::running sequence counter, used to protect Qdisc::bstats reads
from parallel writes, is in the process of being removed. Qdisc::bstats
read/writes will synchronize using an internal u64_stats sync point
instead.
Modify all bstats writes to use _bstats_update(). This ensures that
the internal u64_stats sync point is always acquired and released as
appropriate.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The not-per-CPU variant of qdisc tc (traffic control) statistics,
Qdisc::gnet_stats_basic_packed bstats, is protected with Qdisc::running
sequence counter.
This sequence counter is used for reliably protecting bstats reads from
parallel writes. Meanwhile, the seqcount's write section covers a much
wider area than bstats update: qdisc_run_begin() => qdisc_run_end().
That read/write section asymmetry can lead to needless retries of the
read section. To prepare for removing the Qdisc::running sequence
counter altogether, introduce a u64_stats sync point inside bstats
instead.
Modify _bstats_update() to start/end the bstats u64_stats write
section.
For bisectability, and finer commits granularity, the bstats read
section is still protected with a Qdisc::running read/retry loop and
qdisc_run_begin/end() still starts/ends that seqcount write section.
Once all call sites are modified to use _bstats_update(), the
Qdisc::running seqcount will be removed and bstats read/retry loop will
be modified to utilize the internal u64_stats sync point.
Note, using u64_stats implies no sequence counter protection for 64-bit
architectures. This can lead to the statistics "packets" vs. "bytes"
values getting out of sync on rare occasions. The individual values will
still be valid.
[bigeasy: Minor commit message edits, init all gnet_stats_basic_packed.]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
In HTB offload mode, qdiscs of leaf classes are grafted to netdev
queues. sch_htb expects the dev_queue field of these qdiscs to point to
the corresponding queues. However, qdisc creation may fail, and in that
case noop_qdisc is used instead. Its dev_queue doesn't point to the
right queue, so sch_htb can lose track of used netdev queues, which will
cause internal inconsistencies.
This commit fixes this bug by keeping track of the netdev queue inside
struct htb_class. All reads of cl->leaf.q->dev_queue are replaced by the
new field, the two values are synced on writes, and WARNs are added to
assert equality of the two values.
The driver API has changed: when TC_HTB_LEAF_DEL needs to move a queue,
the driver used to pass the old and new queue IDs to sch_htb. Now that
there is a new field (offload_queue) in struct htb_class that needs to
be updated on this operation, the driver will pass the old class ID to
sch_htb instead (it already knows the new class ID).
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210826115425.1744053-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
currently, only 'ingress' and 'clsact ingress' qdiscs store the tc 'chain
id' in the skb extension. However, userspace programs (like ovs) are able
to setup egress rules, and datapath gets confused in case it doesn't find
the 'chain id' for a packet that's "recirculated" by tc.
Change tcf_classify() to have the same semantic as tcf_classify_ingress()
so that a single function can be called in ingress / egress, using the tc
ingress / egress block respectively.
Suggested-by: Alaa Hleilel <alaa@nvidia.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_lookup_leaf()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:773: warning: Function parameter or member 'hprio' not described in 'htb_lookup_leaf'
net/sched/sch_htb.c:773: warning: Function parameter or member 'prio' not described in 'htb_lookup_leaf'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_do_events()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:708: warning: Function parameter or member 'q' not described in 'htb_do_events'
net/sched/sch_htb.c:708: warning: Function parameter or member 'level' not described in 'htb_do_events'
net/sched/sch_htb.c:708: warning: Function parameter or member 'start' not described in 'htb_do_events'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_charge_class()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:663: warning: Function parameter or member 'q' not described in 'htb_charge_class'
net/sched/sch_htb.c:663: warning: Function parameter or member 'cl' not described in 'htb_charge_class'
net/sched/sch_htb.c:663: warning: Function parameter or member 'level' not described in 'htb_charge_class'
net/sched/sch_htb.c:663: warning: Function parameter or member 'skb' not described in 'htb_charge_class'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_deactivate()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:578: warning: Function parameter or member 'q' not described in 'htb_deactivate'
net/sched/sch_htb.c:578: warning: Function parameter or member 'cl' not described in 'htb_deactivate'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_activate()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:562: warning: Function parameter or member 'q' not described in 'htb_activate'
net/sched/sch_htb.c:562: warning: Function parameter or member 'cl' not described in 'htb_activate'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_change_class_mode()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:533: warning: Function parameter or member 'q' not described in 'htb_change_class_mode'
net/sched/sch_htb.c:533: warning: Function parameter or member 'cl' not described in 'htb_change_class_mode'
net/sched/sch_htb.c:533: warning: Function parameter or member 'diff' not described in 'htb_change_class_mode'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_class_mode()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:507: warning: Function parameter or member 'cl' not described in 'htb_class_mode'
net/sched/sch_htb.c:507: warning: Function parameter or member 'diff' not described in 'htb_class_mode'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_deactivate_prios()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:442: warning: Function parameter or member 'q' not described in 'htb_deactivate_prios'
net/sched/sch_htb.c:442: warning: Function parameter or member 'cl' not described in 'htb_deactivate_prios'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_activate_prios()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:407: warning: Function parameter or member 'q' not described in 'htb_activate_prios'
net/sched/sch_htb.c:407: warning: Function parameter or member 'cl' not described in 'htb_activate_prios'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_remove_class_from_row()
to fix gcc W=1 warnings:
net/sched/sch_htb.c:380: warning: Function parameter or member 'q' not described in 'htb_remove_class_from_row'
net/sched/sch_htb.c:380: warning: Function parameter or member 'cl' not described in 'htb_remove_class_from_row'
net/sched/sch_htb.c:380: warning: Function parameter or member 'mask' not described in 'htb_remove_class_from_row'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_add_class_to_row() to fix
gcc W=1 warnings:
net/sched/sch_htb.c:351: warning: Function parameter or member 'q' not described in 'htb_add_class_to_row'
net/sched/sch_htb.c:351: warning: Function parameter or member 'cl' not described in 'htb_add_class_to_row'
net/sched/sch_htb.c:351: warning: Function parameter or member 'mask' not described in 'htb_add_class_to_row'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_next_rb_node() to fix
gcc W=1 warnings:
net/sched/sch_htb.c:339: warning: Function parameter or member 'n' not described in 'htb_next_rb_node'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_add_to_wait_tree() to fix
gcc W=1 warnings:
net/sched/sch_htb.c:308: warning: Function parameter or member 'q' not described in 'htb_add_to_wait_tree'
net/sched/sch_htb.c:308: warning: Function parameter or member 'cl' not described in 'htb_add_to_wait_tree'
net/sched/sch_htb.c:308: warning: Function parameter or member 'delay' not described in 'htb_add_to_wait_tree'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit ae81feb733 ("sch_htb: fix null pointer dereference
on a null new_q") fixes a NULL pointer dereference bug, but it
is not correct.
Because htb_graft_helper properly handles the case when new_q
is NULL, and after the previous patch by skipping this call
which creates an inconsistency : dev_queue->qdisc will still
point to the old qdisc, but cl->parent->leaf.q will point to
the new one (which will be noop_qdisc, because new_q was NULL).
The code is based on an assumption that these two pointers are
the same, so it can lead to refcount leaks.
The correct fix is to add a NULL pointer check to protect
qdisc_refcount_inc inside htb_parent_to_leaf_offload.
Fixes: ae81feb733 ("sch_htb: fix null pointer dereference on a null new_q")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Suggested-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for parameters of htb_add_to_id_tree() to fix
gcc W=1 warnings:
net/sched/sch_htb.c:282: warning: Function parameter or member 'root' not described in 'htb_add_to_id_tree'
net/sched/sch_htb.c:282: warning: Function parameter or member 'cl' not described in 'htb_add_to_id_tree'
net/sched/sch_htb.c:282: warning: Function parameter or member 'prio' not described in 'htb_add_to_id_tree'
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sch_htb: fix null pointer dereference on a null new_q
Currently if new_q is null, the null new_q pointer will be
dereference when 'q->offload' is true. Fix this by adding
a braces around htb_parent_to_leaf_offload() to avoid it.
Addresses-Coverity: ("Dereference after null check")
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
htb_init may fail to do the offload if it's not supported or if a
runtime error happens when allocating direct qdiscs. In those cases
TC_HTB_CREATE command is not sent to the driver, however, htb_destroy
gets called anyway and attempts to send TC_HTB_DESTROY.
It shouldn't happen, because the driver didn't receive TC_HTB_CREATE,
and also because the driver may not support ndo_setup_tc at all, while
q->offload is true, and htb_destroy mistakenly thinks the offload is
supported. Trying to call ndo_setup_tc in the latter case will lead to a
NULL pointer dereference.
This commit fixes the issues with htb_destroy by deferring assignment of
q->offload until after the TC_HTB_CREATE command. The necessary cleanup
of the offload entities is already done in htb_init.
Reported-by: syzbot+b53a709f04722ca12a3c@syzkaller.appspotmail.com
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
htb_select_queue assumes it's always the offload mode, and it ends up in
calling ndo_setup_tc without any checks. It may lead to a NULL pointer
dereference if ndo_setup_tc is not implemented, or to an error returned
from the driver, which will prevent attaching qdiscs to HTB classes in
the non-offload mode.
This commit fixes the bug by adding the missing check to
htb_select_queue. In the non-offload mode it will return sch->dev_queue,
mimicking tc_modify_qdisc's behavior for the case where select_queue is
not implemented.
Reported-by: syzbot+b53a709f04722ca12a3c@syzkaller.appspotmail.com
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds support for statistics of offloaded HTB. Bytes and
packets counters for leaf and inner nodes are supported, the values are
taken from per-queue qdiscs, and the numbers that the user sees should
have the same behavior as the software (non-offloaded) HTB.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HTB doesn't scale well because of contention on a single lock, and it
also consumes CPU. This patch adds support for offloading HTB to
hardware that supports hierarchical rate limiting.
In the offload mode, HTB passes control commands to the driver using
ndo_setup_tc. The driver has to replicate the whole hierarchy of classes
and their settings (rate, ceil) in the NIC. Every modification of the
HTB tree caused by the admin results in ndo_setup_tc being called.
After this setup, the HTB algorithm is done completely in the NIC. An SQ
(send queue) is created for every leaf class and attached to the
hierarchy, so that the NIC can calculate and obey aggregated rate
limits, too. In the future, it can be changed, so that multiple SQs will
back a single leaf class.
ndo_select_queue is responsible for selecting the right queue that
serves the traffic class of each packet.
The data path works as follows: a packet is classified by clsact, the
driver selects a hardware queue according to its class, and the packet
is enqueued into this queue's qdisc.
This solution addresses two main problems of scaling HTB:
1. Contention by flow classification. Currently the filters are attached
to the HTB instance as follows:
# tc filter add dev eth0 parent 1:0 protocol ip flower dst_port 80
classid 1:10
It's possible to move classification to clsact egress hook, which is
thread-safe and lock-free:
# tc filter add dev eth0 egress protocol ip flower dst_port 80
action skbedit priority 1:10
This way classification still happens in software, but the lock
contention is eliminated, and it happens before selecting the TX queue,
allowing the driver to translate the class to the corresponding hardware
queue in ndo_select_queue.
Note that this is already compatible with non-offloaded HTB and doesn't
require changes to the kernel nor iproute2.
2. Contention by handling packets. HTB is not multi-queue, it attaches
to a whole net device, and handling of all packets takes the same lock.
When HTB is offloaded, it registers itself as a multi-queue qdisc,
similarly to mq: HTB is attached to the netdev, and each queue has its
own qdisc.
Some features of HTB may be not supported by some particular hardware,
for example, the maximum number of classes may be limited, the
granularity of rate and ceil parameters may be different, etc. - so, the
offload is not enabled by default, a new parameter is used to enable it:
# tc qdisc replace dev eth0 root handle 1: htb offload
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a following commit, sch_htb will start using extack in the delete
class operation to pass hardware errors in offload mode. This commit
prepares for that by adding the extack parameter to this callback and
converting usage of the existing qdiscs.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Davide Caratti