Commit graph

154 commits

Author SHA1 Message Date
Vineet Gupta
fac245216b ARC: haps: bump memory to 1 GB
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-03-12 07:22:23 -08:00
Masahiro Yamada
3a71e42313 ARC: build: use $(READELF) instead of hard-coded readelf
The top Makefile defines READELF as the readelf in the cross-toolchains.
Use it rather than the host readelf.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-12-01 17:24:05 -08:00
Masahiro Yamada
a4e070cfeb ARC: build: remove unneeded extra-y
Adding vmlinux.* to extra-y has no point because we expect they are
built on demand while building uImage.*

Add them to 'targets' is enough to include the corresponding .cmd file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-12-01 17:24:05 -08:00
Masahiro Yamada
c5e6ae563c ARC: build: move symlink creation to arch/arc/Makefile to avoid race
If you run 'make uImage uImage.gz' with the parallel option, uImage.gz
will be created by two threads simultaneously.

This is because arch/arc/Makefile does not specify the dependency
between uImage and uImage.gz. Hence, GNU Make assumes they can be
built in parallel. One thread descends into arch/arc/boot/ to create
uImage, and another to create uImage.gz.

Please notice the same log is displayed twice in the following steps:

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig
  $ make -j$(nproc) ARCH=arc uImage uImage.gz
  [ snip ]
    LD      vmlinux
    SORTTAB vmlinux
    SYSMAP  System.map
    OBJCOPY arch/arc/boot/vmlinux.bin
    OBJCOPY arch/arc/boot/vmlinux.bin
    GZIP    arch/arc/boot/vmlinux.bin.gz
    GZIP    arch/arc/boot/vmlinux.bin.gz
    UIMAGE  arch/arc/boot/uImage.gz
    UIMAGE  arch/arc/boot/uImage.gz
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2109376 Bytes = 2059.94 KiB = 2.01 MiB
  Load Address: 80000000
  Entry Point:  80004000
    Image arch/arc/boot/uImage is ready
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2815455 Bytes = 2749.47 KiB = 2.69 MiB
  Load Address: 80000000
  Entry Point:  80004000

This is a race between the two threads trying to write to the same file
arch/arc/boot/uImage.gz. This is a potential problem that can generate
a broken file.

I fixed a similar problem for ARM by commit 3939f33450 ("ARM: 8418/1:
add boot image dependencies to not generate invalid images").

I highly recommend to avoid such build rules that cause a race condition.

Move the uImage rule to arch/arc/Makefile.

Another strangeness is that arch/arc/boot/Makefile compares the
timestamps between $(obj)/uImage and $(obj)/uImage.*:

  $(obj)/uImage: $(obj)/uImage.$(suffix-y)
          @ln -sf $(notdir $<) $@
          @echo '  Image $@ is ready'

This does not work as expected since $(obj)/uImage is a symlink.
The symlink should be created in a phony target rule.

I used $(kecho) instead of echo to suppress the message
'Image arch/arc/boot/uImage is ready' when the -s option is given.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-12-01 17:24:05 -08:00
Zhen Lei
05b1be68c4 ARC: [dts] fix the errors detected by dtbs_check
xxx/arc/boot/dts/axs101.dt.yaml: dw-apb-ictl@e0012000: $nodename:0: \
'dw-apb-ictl@e0012000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
 From schema: xxx/interrupt-controller/snps,dw-apb-ictl.yaml

The node name of the interrupt controller must start with
"interrupt-controller" instead of "dw-apb-ictl".

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-10-05 21:02:29 -07:00
Vineet Gupta
dd7c7ab01a ARC: [plat-eznps]: Drop support for EZChip NPS platform
NPS customers are no longer doing active development, as evident from
rand config build failures reported in recent times, so drop support
for NPS platform.

Tested-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-10-05 21:02:29 -07:00
Evgeniy Didin
26907eb605 ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id
HSDK board has Micrel KSZ9031, recent commit
bcf3440c6d ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.

Also adding name of PHY placed on HSDK board.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-09-01 11:59:04 -07:00
Vineet Gupta
fe81d927b7 ARC: HSDK: wireup perf irq
Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up
the perf interrupt, so enable that in DT.
This is OK for old HSDK where this irq is ignored because pct irq is not
wired up in hardware.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-08-16 21:36:15 -07:00
Linus Torvalds
5364abc579 ARC updates for 5.7-rc1
- Support for DSP enabled userspace (save/restore regs)
 
  - Miscll other platform fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOXpuCuR6hedrdLCJadfx3eKKwl4FAl6HsMYACgkQadfx3eKK
 wl6dWA//anCe8UhTQuIev29YNwrFNJdNK8/uLSzzxCHFdJqZqHCqZRqfO5UNMasu
 1ZLECjBRnNuxECgEJXBzH7At2uPHdPmCvZAHg07SaTc1LSAFYFaTvy85uCGL2Pbu
 XC1rjDlzQtqOcDeuMwtOeVkhZkoJtWxJQhnI2yQjaG6fOhJJupg9uqp6oX6+y4AV
 WuqihSeOExndcBi8sKVdj0UTvaUvwfxWAGkTswG219XrEDbzJ5K7K+Iz5Ftv2wl3
 pr6cMDmR3rd21QSSha5aVZd7Tb+B5FeZQg+JWvoYthvj3QNsf+Z7ed1u38E9mKWj
 71Zpg6kTZmlBqoWUlztJ9w9V2VKphspM1WbBzT/7GQGq6KnVIxxG2PoPCE2tToQK
 oO40N2rU7baD4yqqT79v/s8ZedpLDGMGdgdHLNBQZqfNMHFl/4QARnwieiVNS48Q
 yn6DYgbE2PXiVjiOiYU78MvWMo/gxWQvNFDeIy49G47WwZqcE3GrsV+Q9nFe0p1i
 PlPMc8QxIE/KndC+jOxVe8msKOQFbNAM3IRAHUT0h5B5rHyVEtSLZnITHd0E6Yqx
 mzPNVWfLBQlpC/RnEwietZPCj7VewCEXnHaSeIYERHyPFJklJbDa9DBK3lU6zeLe
 xE0fOFBF1tDXY2d5wC6zHFnw5E0/gXvyvYFDsETo0+giLieqfPw=
 =cyU5
 -----END PGP SIGNATURE-----

Merge tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - Support for DSP enabled userspace (save/restore regs)

 - Misc other platform fixes

* tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: allow userspace DSP applications to use AGU extensions
  ARC: add support for DSP-enabled userspace applications
  ARC: handle DSP presence in HW
  ARC: add helpers to sanitize config options
  ARC: [plat-axs10x]: PGU: remove unused encoder-slave property
2020-04-03 15:28:42 -07:00
Masahiro Yamada
d198b34f38 .gitignore: add SPDX License Identifier
Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25 11:50:48 +01:00
Eugeniy Paltsev
f61f530c5a ARC: [plat-axs10x]: PGU: remove unused encoder-slave property
ARC PGU is looking for encoder via endpoint mechanism and doesn't
use "encoder-slave" property for a long time. Let's drop unused
"encoder-slave" property from ARC PGU node in axs10x.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-16 10:23:25 -07:00
Jose Abreu
7980dff398 ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node
Add a missing property to GMAC node so that multicast filtering works
correctly.

Fixes: 556cc1c5f5 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)")
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-01-14 09:03:10 -08:00
Linus Torvalds
056df578c2 ARC updates for 5.5-rc1
- Jump Label support for ARC
 
  - kmemleak enabled
 
  - arc mm backend TLB Miss / flush optimizations
 
  - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig
    updates and cleanups
 
  - axs platform pll / video-mode updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOXpuCuR6hedrdLCJadfx3eKKwl4FAl3oOlcACgkQadfx3eKK
 wl4HZBAAoE2crAUVCNN+5WweCbkW0UDB69AVcxjRWuL/3y4Va0rfyJyNDjc4g8+p
 QUG8RN2+Pdq3Z7zH0dW5JxRuEWNR5QxKF+KJtaFuEXzLG/XgiMonWBKRocP/SDf9
 oBAe+4beYabhAMc4Kz6SnwbHtFxUCUrRAP5CxlrhW7FF1oK4f5qQ0D8vt3NlgNDJ
 mfBZrsmVUkyiPs19x3uFylgZk4xglw2sV3p8RH+g+40YV+WiG1Xh31ViET4MNctv
 dYuF+EgErtuKHIIknpAbRjCwGSj0Q53L/6HNRoJpTnVKBlqrtLuc5LorG9UeIH6g
 pZJAGAt4GuYaarXX2wPeb69sA+GfVHMVbcZKBCm5UdxpiR3Q+fGk/1aWsb97HZW3
 2uUVq8mEaltXhJDU+Mmym8rfpECvZ8JL3nEJ5r9eTQH+1DhAa7FdRIAW+oO4N4xE
 KahVYzICInrykkn6gFOAA04cr4L3asZ16MHwn02C47FKoUjoM7PVWoVbIz32Dc8P
 7ErMP9TWLc51+ko5hiTxHHRWozpwHCxQavcopgRlZLO3iX1MkmFtYyork8t0Oior
 8jSCwcGBm9XCBMkGznhvVcPQOGMB6/9hhHhgNBPcp5bjMz8GoeZx+dFnW7cKzj4D
 TgsfgqpGzvAF4QWHhmx/f32+Yw5/UTJUzjmXguFKgEJidqIDKIc=
 =DK3r
 -----END PGP SIGNATURE-----

Merge tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta

 - Jump Label support for ARC

 - kmemleak enabled

 - arc mm backend TLB Miss / flush optimizations

 - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig
   updates and cleanups

 - axs platform pll / video-mode updates

* tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: add kmemleak support
  ARC: [plat-axs10x]: remove hardcoded video mode from bootargs
  ARC: [plat-axs10x]: use pgu pll instead of fixed clock
  ARC: ARCv2: jump label: implement jump label patching
  ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3
  ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop
  ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available
  ARC: mm: TLB Miss optim: avoid re-reading ECR
  ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD
  ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg
  ARC: nSIM_700: remove unused network options
  ARC: nSIM_700: switch to DW UART usage
  ARC: merge HAPS-HS with nSIM-HS configs
  ARC: HAPS: cleanup defconfigs from unused ETH drivers
  ARC: HAPS: add HIGHMEM memory zone to DTS
  ARC: HAPS: use same UART configuration everywhere
  ARC: HAPS: cleanup defconfigs from unused IO-related options
  ARC: regenerate nSIM and HAPS defconfigs
2019-12-04 19:06:18 -08:00
Eugeniy Paltsev
e1b2743d70 ARC: [plat-axs10x]: remove hardcoded video mode from bootargs
Now have pixel clock PLL driver and we can change pixel clock rate
so we don't need to enforce one exact video mode. Moreover enforcing
video mode is harmful in case of we enforce mode which isn't
supported by the monitor we are using.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-11-20 09:13:42 -08:00
Eugeniy Paltsev
93c53f2397 ARC: [plat-axs10x]: use pgu pll instead of fixed clock
Use PLL driver instead of fixed-clock for PGU pixel clock.
That allows us to support wider range of graphic modes.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-11-20 09:13:40 -08:00
Eugeniy Paltsev
7b491c0b62 ARC: nSIM_700: remove unused network options
We have snps,arc-emac enabled in nSIM_700. It's obsolete and it's
not used anymore so remove its device tree node and disable
unused network options in defconfig.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:31 -07:00
Eugeniy Paltsev
9c6375f77b ARC: nSIM_700: switch to DW UART usage
Switch nsim_700_defconfig to dwuart for consistent uart settings
for all nSIM configurations.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:31 -07:00
Eugeniy Paltsev
1681baa713 ARC: merge HAPS-HS with nSIM-HS configs
Starting from nSIM 2019.06 is possible to use DW UART
instead of ARC UART. That allows us to merge
"nsim_hs" with "haps_hs" and "nsim_hs_smp" with "haps_hs_smp"
with minor changes which were done in previous commits.

We eliminate nsim_hs_defconfig and nsim_hs_smp_defconfig
and leave haps_hs_defconfig and haps_hs_smp_defconfig
which can be used on HAPS / nSIM / ZEBU / QEMU platforms
without additional changes in Linux kernel.

For nSIM we should now use UART property values
"-prop=nsim_mem-dev=uart0,kind=dwuart,base=0xf0000000"
instead of previously used
"-prop=nsim_mem-dev=uart0,base=0xc0fc1000"
"use_connect" and "irq" values of UART property remains untouched.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:31 -07:00
Eugeniy Paltsev
14fa486f5a ARC: HAPS: add HIGHMEM memory zone to DTS
This is required as a preparation of merging nSIM and HASP
defonfig and device tree.

As we have HIGHMEM disabled in both HAPS and nSIM defconfigs
this doesn't lead to any functional change.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:31 -07:00
Eugeniy Paltsev
3696fc9774 ARC: HAPS: use same UART configuration everywhere
For some reason we use ns8250 UART compatible on UP HAPS
configuration and ns16550a (which is ns8250 with FIFO support)
on SMP HAPS configuration.
Given that we have same UART IP with same IP configuration
on both HAPS configuration use ns16550a compatible everywhere.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:31 -07:00
Eugeniy Paltsev
ab563bf54a ARC: [plat-hsdk]: Enable on-boardi SPI ADC IC
HSDK board has adc108s102 SPI ADC IC installed, enable it.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22 09:58:29 -07:00
Eugeniy Paltsev
8ca8fa7f22 ARC: [plat-hsdk]: Enable on-board SPI NOR flash IC
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22 09:58:29 -07:00
Eugeniy Paltsev
ce0eff0d9b ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations
We want to use DW AXI DMAC on HSDK board in our automated verification
to test cache & dma kernel code changes. This is perfect candidate
as we don't depend on any external peripherals like MMC card / USB
storage / etc.
To increase test coverage we want to test both options:
 * DW AXI DMAC is connected through IOC port & dma direct ops used
 * DW AXI DMAC is connected to DDR port & dma noncoherent ops used

Introduce 'arc_hsdk_axi_dmac_coherent' global variable which can be
modified by debugger (same way as we patch 'ioc_enable') to switch
between these options without recompiling the kernel.
Depend on this value we tweak memory bridge configuration and
"dma-coherent" DTS property of DW AXI DMAC.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-08-05 19:25:57 +05:30
Eugeniy Paltsev
aab128d006 ARC: [plat-hsdk]: enable DW SPI controller
HSDK SoC has DW SPI controller. Enable it in preparation of
enabling on-board SPI peripherals.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-08 09:24:46 +01:00
Alexey Brodkin
94b8beb972 ARC: [haps] Add Virtio support
As a preparation for QEMU usage for ARC let's add basic Virtio-MMIO
peripherals support for the platform we're going to use.

For now we add 5 Virtio slots in .dts and enable block and network devices
via Virtio-MMIO.

Note even though typically Virtio register set fits in 0x200 bytes
we "allocate" here 0x2000 so that it matches ARC's default 8KiB page size
and so remapping of that area is done clearly.

We also enable DEVTMPFS automount for more convenient use
of external root file-stystem. Before that we used to use built-in
Initramfs which didn't automount DEVTMPFS anyways so we didn't need
that option, while now it starts making sense.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-08 09:24:45 +01:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Linus Torvalds
9331b6740f SPDX update for 5.2-rc4
Another round of SPDX header file fixes for 5.2-rc4
 
 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
 added, based on the text in the files.  We are slowly chipping away at
 the 700+ different ways people tried to write the license text.  All of
 these were reviewed on the spdx mailing list by a number of different
 people.
 
 We now have over 60% of the kernel files covered with SPDX tags:
 	$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
 	Files checked:            64533
 	Files with SPDX:          40392
 	Files with errors:            0
 
 I think the majority of the "easy" fixups are now done, it's now the
 start of the longer-tail of crazy variants to wade through.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
 sxVEiFZo8ZU9v1IoRb1I
 =qU++
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull yet more SPDX updates from Greg KH:
 "Another round of SPDX header file fixes for 5.2-rc4

  These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
  added, based on the text in the files. We are slowly chipping away at
  the 700+ different ways people tried to write the license text. All of
  these were reviewed on the spdx mailing list by a number of different
  people.

  We now have over 60% of the kernel files covered with SPDX tags:
	$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
	Files checked:            64533
	Files with SPDX:          40392
	Files with errors:            0

  I think the majority of the "easy" fixups are now done, it's now the
  start of the longer-tail of crazy variants to wade through"

* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
  ...
2019-06-08 12:52:42 -07:00
Thomas Gleixner
4505153954 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 59 temple place suite 330 boston ma 02111
  1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 136 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:06 +02:00
Thomas Gleixner
4fa9c49f4d treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 291
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details the full gnu general public license is included in
  this distribution in the file called copying

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope [that] it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details the full gnu general public license is included in
  this distribution in the file called copying

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 57 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.515993066@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:38 +02:00
Alexey Brodkin
46e04c25e7 ARC: [plat-hsdk] Get rid of inappropriate PHY settings
Initial bring-up of the platform was done on FPGA prototype
where TI's DP83867 PHY was used. And so some specific PHY
options were added.

Just to confirm this is what we get on FPGA prototype in the bootlog:
| TI DP83867 stmmac-0:00: attached PHY driver [TI DP83867] ...

On real board though we have Micrel KZS9031 PHY and we even have
CONFIG_MICREL_PHY=y set in hsdk_defconfig. That's what we see in the bootlog:
| Micrel KSZ9031 Gigabit PHY stmmac-0:00: ...

So essentially all TI-related bits have to go away.

Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-28 10:09:31 -07:00
Eugeniy Paltsev
b04700645d ARC: [plat-hsdk]: Add support of Vivante GPU
HSDK board has built-in Vivante GPU IP which works perfectly fine
with Etnaviv driver, so let's use it.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-28 10:08:16 -07:00
Eugeniy Paltsev
780b35b6aa ARC: [plat-hsdk]: enable creg-gpio controller
HSDK SOC has CREG GPIO controller which can be used to control
SPI chip select lines.
Enable it in preparation of enabling SPI peripherals.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-28 10:06:42 -07:00
Jose Abreu
4c70850aeb ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node
Add the binding for RX/TX fifo size of GMAC node.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-21 08:48:53 -07:00
Jose Abreu
ecc906a11c ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node
GMAC controller on HSDK boards supports 256 Hash Table size so we need to
add the multicast filter bins property. This allows for the Hash filter
to work properly using stmmac driver.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-21 08:48:52 -07:00
Vineet Gupta
21cee1bd15 ARC: [hsdk] Make it easier to add PAE40 region to DTB
1. Bump top level address-cells/size-cells nodes to 2 (to ensure all
   down stream addresses are 64-bits, unless explicitly specified
   otherwise (in "soc" bus with all peripherals)

2. "memory" also specified with address/size 2

3. Add a commented reference for PAE40 region beyond 4GB physical
   address space

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-04-02 12:11:01 -07:00
Eugeniy Paltsev
5d4ab8d096 ARC: [plat-hsdk]: Enable AXI DW DMAC support
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25 08:52:16 -08:00
Eugeniy Paltsev
66f7d3709c ARC: [plat-hsdk]: Add reset controller handle to manage USB reset
DW USB controller on HSDK hangs sometimes after SW reset, so
add reset handle to make possible to reset DW USB controller HW.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25 08:52:16 -08:00
Alexey Brodkin
ef4c54c340 ARC: DTB: [scripted] fix node name and address spelling
1. Remove "0x" prefix from unit-address of node names
----------------------->8------------------------
sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------

2. Make all hex addresses lowercase:
----------------------->8------------------------
sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts*
sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------

Inspired by [1] and the like.

[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/

Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25 08:52:16 -08:00
Eugeniy Paltsev
4592f11e47 ARC: [plat-hsdk] Enable DW APB GPIO support
Enable GPIO support on HSDK. HSDK SoC includes Synopsys
DesignWare DW_apb_gpio IP with 24 GPIOs mapped onto port A.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12 10:38:27 -08:00
Eugeniy Paltsev
678c8110d2 ARC: dma [IOC]: mark DMA devices connected as dma-coherent
Mark DMA devices on AXS103 and HSDK boards connected through IOC
port as dma-coherent.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-08-31 12:47:26 -07:00
Alexey Brodkin
5c0920897a ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernel
Otherwise kernel uses random MAC which is not very conveniet.
With that change in place use might set desired MAC in U-Boot
with "setenv ethaddr 11:22:33:44:55:66", save environment and
then from boot to boot the same MAC will be used by the kernel.

One other note for this to happen it's required to pass
board's .dtb in U-Boot's "bootm" command like that:
------------------->8-----------------
bootm 0x82000000 - 0x84000000
------------------->8-----------------

Here 0x82000000 is location of uImage while
0x80000000 is location of either axs10x.dtb or hsdk.dtb
previously loaded from SD-card, USB storage or TFTP server.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: stable@vger.kernel.org # 4.14
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-08-27 09:00:36 -07:00
Masahiro Yamada
54a702f705 kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.

Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped

A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.

  .SECONDARY
    Prerequisites of this special target are treated as intermediate
    files but are never automatically deleted.

  .PRECIOUS
    When make is interrupted during execution, it may delete the target
    file it is updating if the file was modified since make started.
    If you mark the file as precious, make will never delete the file
    if interrupted.

Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.

The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.

Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.

  .PRECIOUS: $(obj)/%.lex.c

works, but

  .SECONDARY: $(obj)/%.lex.c

has no effect.  However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.

The targets specified as .SECONDARY must be explicit.  $(targets)
contains all targets that need to include .*.cmd files.  So, the
intermediates you want to keep are mostly in there.  Therefore, mark
$(targets) as .SECONDARY.  It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.

I replaced some .SECONDARY / .PRECIOUS markers with 'targets'.  This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
2018-04-07 19:04:02 +09:00
Bartosz Golaszewski
0538233359 arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb
Using compatible strings without the <manufacturer> part for at24 is
deprecated since commit 6da28acf74 ("dt-bindings: at24: consistently
document the compatible property"). Use a correct 'atmel,<model>'
value.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-02-06 14:36:32 -08:00
Alexey Brodkin
8ff3afc159 ARC: Enable fatal signals on boot for dev platforms
It's very convenient to have fatal signals enabled on developemnt
platform as this allows to catch problems that happen early in
user-space (like crashing init or dynamic loader).

Otherwise we may either enable it later from alive taregt console
by "echo 1 > /proc/sys/kernel/print-fatal-signals" but:
 1. We might be unfortunate enough to not reach working console
 2. Forget to enable fatal signals and miss something interesting

Given we're talking about development platforms here it shouldn't
be a problem if a bit more data gets printed to debug console.

Moreover this makes behavior of all our dev platforms predictable
as today some platforms already have it enabled and some don't -
which is way too inconvenient.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-18 10:51:27 -08:00
Eugeniy Paltsev
fbd1cec570 ARC: [plat-axs103]: Set initial core pll output frequency
Set initial core pll output frequency specified in device tree to
100MHz for SMP configuration and 90MHz for UP configuration.
It will be applied at the core pll driver probing.

Update platform quirk for decreasing core frequency for quad core
configuration.

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20 12:41:45 -08:00
Eugeniy Paltsev
a08c832f27 ARC: [plat-hsdk]: Set initial core pll output frequency
Set initial core pll output frequency specified in device tree to
1GHz. It will be applied at the core pll driver probing.

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20 12:41:44 -08:00
Linus Torvalds
ca122fe376 ARC updates for 4.15-rc1
- More changes for HS48 cores: supporting MMUv5, detecting new micro-arch gizmos
 
  - axs10x platform wiring up reset driver merged in this cycle
 
  - ARC perf driver optimizations
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaFdirAAoJEGnX8d3iisJe7bcP/iKL3sfCHwzgQQ4jUvm32PfL
 /YlMXk6+YhboGb1txrEOyot1ZIAFNpHrKLunhkkHSlKxySxRZ29+umWBQfIy7MN/
 2YrBfpCXwugwajA00PD45uv340QJtTa9UkR9WMVH0XDtTtgpUy3rm6Ee1nt6+elF
 M7BEZgfD5LgMP0eKgHVkZwK3OT/oYm+a5M8bjCdSKuwjtrd4W3ZC9WPv1mZLjAAO
 S5DDfa+TeufublqJviZzQmLXipFvluBdGbzANJpkAYMnE82vKkrlqAWQSEJ5kwRn
 3mbFOze8sFPUlo5uji6Z9Sf2a/G9e3PX5d6xPIQcNaNFxdyVrr4VDLQII6ulJcBj
 dlS6TPg3/5UerhiGwUnJfIQxlqw/Ebn4RvgzksxX8+ujjjvd2kY3DCFVzjlKaenh
 Bwo0kyLhCJKHSInKvW4r6W2ZnBW6VWoGST/KYwgZJwTeoxl043BRA2AoNKKiolJJ
 d5vyonUXjIddUtcwO3vt/xx1lqKf49ZK0Bx8EGDMYHhZwpGt13geZme7b5H975oB
 uPM+m9vPyiyiD2HziAydvoLT+uCyRSFObHKcQLs+1E+QSw/tzrQgNsMTwhSPtg/g
 Uwt/KU+cCnLeksGRuB4LgSp/7nbhB6PGVzUeRCo2VVls875TRQxPEjJ1rZ2kd9JO
 IVpYxDlu+4cKsRDK/EIl
 =LX+r
 -----END PGP SIGNATURE-----

Merge tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - more changes for HS48 cores: supporting MMUv5, detecting new
   micro-arch gizmos

 - axs10x platform wiring up reset driver merged in this cycle

 - ARC perf driver optimizations

* tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: avoid vmalloc backed mmap
  ARCv2: perf: optimize given that num counters <= 32
  ARCv2: perf: tweak overflow interrupt
  ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset
  ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer
  ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking
  ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the  ISA config
2017-11-25 08:21:54 -10:00
Eugeniy Paltsev
ff64d695f9 ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset
DW ethernet controller on axs10x hangs sometimes after SW reset.
Invoke the newly aded driver (reset-axs10x.c) by adding the DT bits.

With this in place, we don't need the open-coded quirk in platform
code, so get rid of it as well !

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-15 09:40:43 -08:00
Linus Torvalds
37cb8e1f8e DeviceTree for 4.15:
- kbuild cleanups and improvements for dtbs
 
 - Code clean-up of overlay code and fixing for some long standing memory
   leak and race condition in applying overlays
 
 - Improvements to DT memory usage making sysfs/kobjects optional and
   skipping unflattening of disabled nodes. This is part of kernel
   tinification efforts.
 
 - Final piece of removing storing the full path for every DT node. The
   prerequisite conversion of printk's to use device_node format
   specifier happened in 4.14.
 
 - Sync with current upstream dtc. This brings additional checks to dtb
   compiling.
 
 - Binding doc tree wide removal of leading 0s from examples
 
 - RTC binding documentation adding missing devices and some
   consolidation of duplicated bindings
 
 - Vendor prefix documentation for nutsboard, Silicon Storage Technology,
   shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
   Opal Kelly, and Next Thing
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaCwaSEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcNzeA/8
 C8uQhSsX2+UQZvFzcEA8KQAMGT3kYdrcf+gidRKwCEUWg1qscUEpTb3n3Rm5NUbU
 RPD1s6GSlh6fJCMHDTQ6Tti/T59L7nZa2/AIGmUishGu4x4q1o18AobpFJmYP/EM
 SJPwnmm5RV9WcZFao1y+sY3Xtn8DStxHO4cS+dyF5/EvPN9D8nbLJfu7bgTBAZww
 HktIMB9kx+GTipRQZBvBwXoy5MJjthIZub4XwzesA4tGananj4cXlc0xaVxpdYy3
 5bO6q5F7cbrZ2uyrF+oIChpCENK4VaXh80m0WHc8EzaG++shzEkR4he1vYkwnV+I
 OYo4vsUg9dP8rBksUG1eYhS8fJKPvEBRNP7ETT5utVBy5I/tDEbo/crmQZRTIDIC
 hZbhcdZlISZj0DzkMK2ZHQV9UYtRWzXrJbZHFIPP12GCyvXVxYJUIWb9iYnUYSon
 KugygsFSpZHMWmfAhemw5/ctJZ19qhM5UIl2KZk5tMBHAf466ILmZjg0me6fYkOp
 eADfwHJ1dLMdK79CVMHSfp+vArcZXp35B16c3sWpJB36Il97Mc/9siEufCL4GKX7
 IBBnQBlbpSBKBejWVyI7Ip/Xp5u4qAQD+ZMJ9oLqBRqfWerHbDuOERlEOgwGqJYr
 9v4HvP7V8eVUvAdqXka4EBfCyAgUzXDAxG2Dfmv9vGU=
 =jgpN
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A bigger diffstat than usual with the kbuild changes and a tree wide
  fix in the binding documentation.

  Summary:

   - kbuild cleanups and improvements for dtbs

   - Code clean-up of overlay code and fixing for some long standing
     memory leak and race condition in applying overlays

   - Improvements to DT memory usage making sysfs/kobjects optional and
     skipping unflattening of disabled nodes. This is part of kernel
     tinification efforts.

   - Final piece of removing storing the full path for every DT node.
     The prerequisite conversion of printk's to use device_node format
     specifier happened in 4.14.

   - Sync with current upstream dtc. This brings additional checks to
     dtb compiling.

   - Binding doc tree wide removal of leading 0s from examples

   - RTC binding documentation adding missing devices and some
     consolidation of duplicated bindings

   - Vendor prefix documentation for nutsboard, Silicon Storage
     Technology, shimafuji, Tecon Microprocessor Technologies, DH
     electronics GmbH, Opal Kelly, and Next Thing"

* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: usb: add #phy-cells to usb-nop-xceiv
  dt-bindings: Remove leading zeros from bindings notation
  kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
  MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
  kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
  .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
  .gitignore: sort normal pattern rules alphabetically
  dt-bindings: add vendor prefix for Next Thing Co.
  scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
  of: dynamic: fix memory leak related to properties of __of_node_dup
  of: overlay: make pr_err() string unique
  of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
  of: overlay: remove unneeded check for NULL kbasename()
  of: overlay: remove a dependency on device node full_name
  of: overlay: simplify applying symbols from an overlay
  of: overlay: avoid race condition between applying multiple overlays
  of: overlay: loosen overly strict phandle clash check
  of: overlay: expand check of whether overlay changeset can be removed
  of: overlay: detect cases where device tree may become corrupt
  of: overlay: minor restructuring
  ...
2017-11-14 18:25:40 -08:00
Masahiro Yamada
7e7962dd1a kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each
DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from
the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile.
It could be a race problem when building DTBS in parallel.

Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor
sub-directories, so this broke when Broadcom added one more hierarchy
in arch/arm64/boot/dts/broadcom/<soc>/.

One idea to fix the issues in a clean way is to move DTB handling
to Kbuild core scripts.  Makefile.dtbinst already recognizes dtb-y
natively, so it should not hurt to do so.

Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is
enabled.  All clutter things in Makefiles go away.

As a bonus clean-up, I also removed dts-dirs.  Just use subdir-y
directly to traverse sub-directories.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB]
Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-09 17:03:07 -06:00