To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-9-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-5-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Having assigned a parent to the device, the suggested path is
no longer valid. As /sys/bus/event_sources based path is also
provided, simply drop mention of alternative.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-3-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
If the firmware_signature changes then OSPM should not attempt to resume
from hibernate, but should instead perform a clean reboot. Set the global
swsusp_hardware_signature to allow the generic code to include the value
in the swsusp header on disk, and perform the appropriate check on resume.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240412073530.2222496-3-dwmw2@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
ACPICA commit 44fc328a1a14b097d92b8be83989e4bf69b6e6cb
The FACS is optional even on hardware reduced platforms, and may exist
for the purpose of communicating the hardware_signature field to provoke
a clean reboot instead of a resume from hibernation.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240412073530.2222496-2-dwmw2@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
During linear map pgtable creation, each pgtable is fixmapped /
fixunmapped twice; once during allocation to zero the memory, and a
again during population to write the entries. This means each table has
2 TLB invalidations issued against it. Let's fix this so that each table
is only fixmapped/fixunmapped once, halving the number of TLBIs, and
improving performance.
Achieve this by separating allocation and initialization (zeroing) of
the page. The allocated page is now fixmapped directly by the walker and
initialized, before being populated and finally fixunmapped.
This approach keeps the change small, but has the side effect that late
allocations (using __get_free_page()) must also go through the generic
memory clearing routine. So let's tell __get_free_page() not to zero the
memory to avoid duplication.
Additionally this approach means that fixmap/fixunmap is still used for
late pgtable modifications. That's not technically needed since the
memory is all mapped in the linear map by that point. That's left as a
possible future optimization if found to be needed.
Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:
| Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
| VM, 16G | VM, 64G | VM, 256G | Metal, 512G
---------------|-------------|-------------|-------------|-------------
| ms (%) | ms (%) | ms (%) | ms (%)
---------------|-------------|-------------|-------------|-------------
before | 11 (0%) | 161 (0%) | 656 (0%) | 1654 (0%)
after | 10 (-11%) | 104 (-35%) | 438 (-33%) | 1223 (-26%)
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-4-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
After removing uneccessary TLBIs, the next bottleneck when creating the
page tables for the linear map is DSB and ISB, which were previously
issued per-pte in __set_pte(). Since we are writing multiple ptes in a
given pte table, we can elide these barriers and insert them once we
have finished writing to the table.
Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:
| Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
| VM, 16G | VM, 64G | VM, 256G | Metal, 512G
---------------|-------------|-------------|-------------|-------------
| ms (%) | ms (%) | ms (%) | ms (%)
---------------|-------------|-------------|-------------|-------------
before | 78 (0%) | 435 (0%) | 1723 (0%) | 3779 (0%)
after | 11 (-86%) | 161 (-63%) | 656 (-62%) | 1654 (-56%)
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-3-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
A large part of the kernel boot time is creating the kernel linear map
page tables. When rodata=full, all memory is mapped by pte. And when
there is lots of physical ram, there are lots of pte tables to populate.
The primary cost associated with this is mapping and unmapping the pte
table memory in the fixmap; at unmap time, the TLB entry must be
invalidated and this is expensive.
Previously, each pmd and pte table was fixmapped/fixunmapped for each
cont(pte|pmd) block of mappings (16 entries with 4K granule). This means
we ended up issuing 32 TLBIs per (pmd|pte) table during the population
phase.
Let's fix that, and fixmap/fixunmap each page once per population, for a
saving of 31 TLBIs per (pmd|pte) table. This gives a significant boot
speedup.
Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:
| Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
| VM, 16G | VM, 64G | VM, 256G | Metal, 512G
---------------|-------------|-------------|-------------|-------------
| ms (%) | ms (%) | ms (%) | ms (%)
---------------|-------------|-------------|-------------|-------------
before | 168 (0%) | 2198 (0%) | 8644 (0%) | 17447 (0%)
after | 78 (-53%) | 435 (-80%) | 1723 (-80%) | 3779 (-78%)
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a script which produces a Flat Image Tree (FIT), a single file
containing the built kernel and associated devicetree files.
Compression defaults to gzip which gives a good balance of size and
performance.
The files compress from about 86MB to 24MB using this approach.
The FIT can be used by bootloaders which support it, such as U-Boot
and Linuxboot. It permits automatic selection of the correct
devicetree, matching the compatible string of the running board with
the closest compatible string in the FIT. There is no need for
filenames or other workarounds.
Add a 'make image.fit' build target for arm64, as well.
The FIT can be examined using 'dumpimage -l'.
This uses the 'dtbs-list' file but processes only .dtb files, ignoring
the overlay .dtbo files.
This features requires pylibfdt (use 'pip install libfdt'). It also
requires compression utilities for the algorithm being used. Supported
compression options are the same as the Image.xxx files. Use
FIT_COMPRESSION to select an algorithm other than gzip.
While FIT supports a ramdisk / initrd, no attempt is made to support
this here, since it must be built separately from the Linux build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a new variable containing a list of possible targets. Mark them as
phony. This matches the approach taken for arch/arm
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Link: https://lore.kernel.org/r/20240329032836.141899-2-sjg@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently we're using "sbfx" to extract the PMUVer from ID_AA64DFR0_EL1
and skip the init/reset if no PMU present when the extracted PMUVer is
negative or is zero. However for PMUv3p8 the PMUVer will be 0b1000 and
PMUVer extracted by "sbfx" will always be negative and we'll skip the
init/reset in __init_el2_debug/reset_pmuserenr_el0 unexpectedly.
So this patch use "ubfx" instead of "sbfx" to extract the PMUVer. If
the PMUVer is implementation defined (0b1111) or not implemented(0b0000)
then skip the reset/init. Previously we'll also skip the init/reset
if the PMUVer is higher than the version we known (currently PMUv3p9),
with this patch we'll only skip if the PMU is not implemented or
implementation defined. This keeps consistence with how we probe
the PMU in the driver with pmuv3_implemented().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240411123030.7201-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
MAX_TLBI_RANGE_PAGES pages is covered by SCALE#3 and NUM#31 and it's
supported now. Allow TLBI RANGE operation when the number of pages is
equal to MAX_TLBI_RANGE_PAGES in __flush_tlb_range_nosync().
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-4-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
The macro returns the operand of TLBI RANGE instruction. A mask needs
to be applied to each individual field upon producing the operand, to
avoid the adjacent fields can interfere with each other when invalid
arguments have been provided. The code looks more tidy at least with
a mask and FIELD_PREP().
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-3-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty
pages are collected by VMM and the page table entries become write
protected during live migration. Unfortunately, the operand passed
to the TLBI RANGE instruction isn't correctly sorted out due to the
commit 117940aa6e ("KVM: arm64: Define kvm_tlb_flush_vmid_range()").
It leads to crash on the destination VM after live migration because
TLBs aren't flushed completely and some of the dirty pages are missed.
For example, I have a VM where 8GB memory is assigned, starting from
0x40000000 (1GB). Note that the host has 4KB as the base page size.
In the middile of migration, kvm_tlb_flush_vmid_range() is executed
to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to
__kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3
and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported
by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned
from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop
in the __flush_tlb_range_op() until the variable @scale underflows
and becomes -9, 0xffff708000040000 is set as the operand. The operand
is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to
invalid @scale and @num.
Fix it by extending __TLBI_RANGE_NUM() to support the combination of
SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can
be returned from the macro, meaning the TLBs for 0x200000 pages in the
above example can be flushed in one shoot with SCALE#3 and NUM#31. The
macro TLBI_RANGE_MASK is dropped since no one uses it any more. The
comments are also adjusted accordingly.
Fixes: 117940aa6e ("KVM: arm64: Define kvm_tlb_flush_vmid_range()")
Cc: stable@kernel.org # v6.6+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-2-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since commit 20af807d80 ("arm64: Avoid cpus_have_const_cap() for
ARM64_HAS_GIC_PRIO_MASKING"), the alternative.h include is not used,
so remove it.
Fixes: 20af807d80 ("arm64: Avoid cpus_have_const_cap() for ARM64_HAS_GIC_PRIO_MASKING")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240314063819.2636445-1-ruanjinjie@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Now that perf supports giving the PMU device a parent, we can use our
platform device to make the relationship between CMN instances and PMU
IDs trivially discoverable, from either nominal direction:
root@crazy-taxi:~# ls /sys/devices/platform/ARMHC600:00 | grep cmn
arm_cmn_0
root@crazy-taxi:~# realpath /sys/bus/event_source/devices/arm_cmn_0/..
/sys/devices/platform/ARMHC600:00
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/25d4428df1ddad966c74a3ed60171cd3ca6c8b66.1712682917.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-11-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-10-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-9-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-8-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-7-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-6-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-5-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-4-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-3-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In some cases, it's useful to be able to select a random cpu from the
intersection of two masks, excluding a particular CPU.
For example, in some systems an uncore PMU is shared by a subset of
CPUs, and management of this PMU is assigned to some arbitrary CPU in
this set. Whenever the management CPU is hotplugged out, we wish to
migrate responsibility to another arbitrary CPU which is both in this
set and online.
Today we can use cpumask_any_and() to select an arbitrary CPU in the
intersection of two masks. We can also use cpumask_any_but() to select
any arbitrary cpu in a mask excluding, a particular CPU.
To do both, we either need to use a temporary cpumask, which is
wasteful, or use some lower-level cpumask helpers, which can be unclear.
This patch adds a new cpumask_any_and_but() to cater for these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-2-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4VkW
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=v7jY
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
- Address a slow memory leak with RPC-over-TCP
- Prevent another NFS4ERR_DELAY loop during CREATE_SESSION
-----BEGIN PGP SIGNATURE-----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=dGcu
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a slow memory leak with RPC-over-TCP
- Prevent another NFS4ERR_DELAY loop during CREATE_SESSION
* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP
* Allow creating new links to special files which were not associated with a
project quota.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZgwRrQAKCRAH7y4RirJu
9OtyAP4m8cXLi+fjRslGLNhQQXzZHIcpaPiWZ9Ec41Y3uzZNBQD/doS6P4aGcH0m
taYQ+nyzuavEZiOEg+d65OoUIrDZzg4=
=bgjU
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
- Allow creating new links to special files which were not associated
with a project quota
* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: allow cross-linking special files without project quota
-----BEGIN PGP SIGNATURE-----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=eZXs
-----END PGP SIGNATURE-----
Merge tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix to retry close to avoid potential handle leaks when server
returns EBUSY
- DFS fixes including a fix for potential use after free
- fscache fix
- minor strncpy cleanup
- reconnect race fix
- deal with various possible UAF race conditions tearing sessions down
* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
smb: client: fix potential UAF in smb2_is_network_name_deleted()
smb: client: fix potential UAF in is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_lease_break()
smb: client: fix potential UAF in cifs_stats_proc_show()
smb: client: fix potential UAF in cifs_stats_proc_write()
smb: client: fix potential UAF in cifs_dump_full_key()
smb: client: fix potential UAF in cifs_debug_files_proc_show()
smb3: retrying on failed server close
smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
smb: client: handle DFS tcons in cifs_construct_tcon()
smb: client: refresh referral without acquiring refpath_lock
smb: client: guarantee refcounted children from parent session
cifs: Fix caching to try to do open O_WRONLY as rdwr on server
smb: client: fix UAF in smb2_reconnect_server()
smb: client: replace deprecated strncpy with strscpy
