- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----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=BalU
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
Fix a bug where KVM fails to check the validity of an incoming userspace
virtual address and tries to activate a gfn_to_pfn_cache with a kernel address.
-----BEGIN PGP SIGNATURE-----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=Vgz5
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.10-11' of https://github.com/kvm-x86/linux into HEAD
KVM Xen:
Fix a bug where KVM fails to check the validity of an incoming userspace
virtual address and tries to activate a gfn_to_pfn_cache with a kernel address.
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZpTCAxccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFjChAQCWs9ucJag4USgvXpg5mo9sxzly
kBZZ1o49N/VLxs4cagEAtq3KVNQNQyGXelYH6gr20aI85j6VnZW5W5z+sy5TAgk=
=sSOt
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.11
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
* kvm-arm64/docs:
: KVM Documentation fixes, courtesy of Changyuan Lyu
:
: Small set of typo fixes / corrections to the KVM API documentation
: relating to MSIs and arm64 VGIC UAPI.
MAINTAINERS: Include documentation in KVM/arm64 entry
KVM: Documentation: Correct the VGIC V2 CPU interface addr space size
KVM: Documentation: Enumerate allowed value macros of `irq_type`
KVM: Documentation: Fix typo `BFD`
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/nv-tcr2:
: Fixes to the handling of TCR_EL1, courtesy of Marc Zyngier
:
: Series addresses a couple gaps that are present in KVM (from cover
: letter):
:
: - VM configuration: HCRX_EL2.TCR2En is forced to 1, and we blindly
: save/restore stuff.
:
: - trap bit description and routing: none, obviously, since we make a
: point in not trapping.
KVM: arm64: Honor trap routing for TCR2_EL1
KVM: arm64: Make PIR{,E0}_EL1 save/restore conditional on FEAT_TCRX
KVM: arm64: Make TCR2_EL1 save/restore dependent on the VM features
KVM: arm64: Get rid of HCRX_GUEST_FLAGS
KVM: arm64: Correctly honor the presence of FEAT_TCRX
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/nv-sve:
: CPTR_EL2, FPSIMD/SVE support for nested
:
: This series brings support for honoring the guest hypervisor's CPTR_EL2
: trap configuration when running a nested guest, along with support for
: FPSIMD/SVE usage at L1 and L2.
KVM: arm64: Allow the use of SVE+NV
KVM: arm64: nv: Add additional trap setup for CPTR_EL2
KVM: arm64: nv: Add trap description for CPTR_EL2
KVM: arm64: nv: Add TCPAC/TTA to CPTR->CPACR conversion helper
KVM: arm64: nv: Honor guest hypervisor's FP/SVE traps in CPTR_EL2
KVM: arm64: nv: Load guest FP state for ZCR_EL2 trap
KVM: arm64: nv: Handle CPACR_EL1 traps
KVM: arm64: Spin off helper for programming CPTR traps
KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state
KVM: arm64: nv: Use guest hypervisor's max VL when running nested guest
KVM: arm64: nv: Save guest's ZCR_EL2 when in hyp context
KVM: arm64: nv: Load guest hyp's ZCR into EL1 state
KVM: arm64: nv: Handle ZCR_EL2 traps
KVM: arm64: nv: Forward SVE traps to guest hypervisor
KVM: arm64: nv: Forward FP/ASIMD traps to guest hypervisor
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/el2-kcfi:
: kCFI support in the EL2 hypervisor, courtesy of Pierre-Clément Tosi
:
: Enable the usage fo CONFIG_CFI_CLANG (kCFI) for hardening indirect
: branches in the EL2 hypervisor. Unlike kernel support for the feature,
: CFI failures at EL2 are always fatal.
KVM: arm64: nVHE: Support CONFIG_CFI_CLANG at EL2
KVM: arm64: Introduce print_nvhe_hyp_panic helper
arm64: Introduce esr_brk_comment, esr_is_cfi_brk
KVM: arm64: VHE: Mark __hyp_call_panic __noreturn
KVM: arm64: nVHE: gen-hyprel: Skip R_AARCH64_ABS32
KVM: arm64: nVHE: Simplify invalid_host_el2_vect
KVM: arm64: Fix __pkvm_init_switch_pgd call ABI
KVM: arm64: Fix clobbered ELR in sync abort/SError
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/ctr-el0:
: Support for user changes to CTR_EL0, courtesy of Sebastian Ott
:
: Allow userspace to change the guest-visible value of CTR_EL0 for a VM,
: so long as the requested value represents a subset of features supported
: by hardware. In other words, prevent the VMM from over-promising the
: capabilities of hardware.
:
: Make this happen by fitting CTR_EL0 into the existing infrastructure for
: feature ID registers.
KVM: selftests: Assert that MPIDR_EL1 is unchanged across vCPU reset
KVM: arm64: nv: Unfudge ID_AA64PFR0_EL1 masking
KVM: selftests: arm64: Test writes to CTR_EL0
KVM: arm64: rename functions for invariant sys regs
KVM: arm64: show writable masks for feature registers
KVM: arm64: Treat CTR_EL0 as a VM feature ID register
KVM: arm64: unify code to prepare traps
KVM: arm64: nv: Use accessors for modifying ID registers
KVM: arm64: Add helper for writing ID regs
KVM: arm64: Use read-only helper for reading VM ID registers
KVM: arm64: Make idregs debugfs iterator search sysreg table directly
KVM: arm64: Get sys_reg encoding from descriptor in idregs_debug_show()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/shadow-mmu:
: Shadow stage-2 MMU support for NV, courtesy of Marc Zyngier
:
: Initial implementation of shadow stage-2 page tables to support a guest
: hypervisor. In the author's words:
:
: So here's the 10000m (approximately 30000ft for those of you stuck
: with the wrong units) view of what this is doing:
:
: - for each {VMID,VTTBR,VTCR} tuple the guest uses, we use a
: separate shadow s2_mmu context. This context has its own "real"
: VMID and a set of page tables that are the combination of the
: guest's S2 and the host S2, built dynamically one fault at a time.
:
: - these shadow S2 contexts are ephemeral, and behave exactly as
: TLBs. For all intent and purposes, they *are* TLBs, and we discard
: them pretty often.
:
: - TLB invalidation takes three possible paths:
:
: * either this is an EL2 S1 invalidation, and we directly emulate
: it as early as possible
:
: * or this is an EL1 S1 invalidation, and we need to apply it to
: the shadow S2s (plural!) that match the VMID set by the L1 guest
:
: * or finally, this is affecting S2, and we need to teardown the
: corresponding part of the shadow S2s, which invalidates the TLBs
KVM: arm64: nv: Truely enable nXS TLBI operations
KVM: arm64: nv: Add handling of NXS-flavoured TLBI operations
KVM: arm64: nv: Add handling of range-based TLBI operations
KVM: arm64: nv: Add handling of outer-shareable TLBI operations
KVM: arm64: nv: Invalidate TLBs based on shadow S2 TTL-like information
KVM: arm64: nv: Tag shadow S2 entries with guest's leaf S2 level
KVM: arm64: nv: Handle FEAT_TTL hinted TLB operations
KVM: arm64: nv: Handle TLBI IPAS2E1{,IS} operations
KVM: arm64: nv: Handle TLBI ALLE1{,IS} operations
KVM: arm64: nv: Handle TLBI VMALLS12E1{,IS} operations
KVM: arm64: nv: Handle TLB invalidation targeting L2 stage-1
KVM: arm64: nv: Handle EL2 Stage-1 TLB invalidation
KVM: arm64: nv: Add Stage-1 EL2 invalidation primitives
KVM: arm64: nv: Unmap/flush shadow stage 2 page tables
KVM: arm64: nv: Handle shadow stage 2 page faults
KVM: arm64: nv: Implement nested Stage-2 page table walk logic
KVM: arm64: nv: Support multiple nested Stage-2 mmu structures
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/ffa-1p1:
: Improvements to the pKVM FF-A Proxy, courtesy of Sebastian Ene
:
: Various minor improvements to how host FF-A calls are proxied with the
: TEE, along with support for v1.1 of the protocol.
KVM: arm64: Use FF-A 1.1 with pKVM
KVM: arm64: Update the identification range for the FF-A smcs
KVM: arm64: Add support for FFA_PARTITION_INFO_GET
KVM: arm64: Trap FFA_VERSION host call in pKVM
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Provide a command-line parameter to statically control the WFx trap
: selection in KVM
:
: - Make sysreg masks allocation accounted
Revert "KVM: arm64: nv: Fix RESx behaviour of disabled FGTs with negative polarity"
KVM: arm64: nv: Use GFP_KERNEL_ACCOUNT for sysreg_masks allocation
KVM: arm64: nv: Fix RESx behaviour of disabled FGTs with negative polarity
KVM: arm64: Add early_param to control WFx trapping
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
-----BEGIN PGP SIGNATURE-----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=DpIK
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
- Rejecting memory region operations for ucontrol mode VMs
- Rewind the PSW on host intercepts for VSIE
- Remove unneeded include
-----BEGIN PGP SIGNATURE-----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=D4sp
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
Assortment of tiny fixes which are not time critical:
- Rejecting memory region operations for ucontrol mode VMs
- Rewind the PSW on host intercepts for VSIE
- Remove unneeded include
- Redirect AMO load/store access fault traps to guest
- Perf kvm stat support for RISC-V
- Use HW IMSIC guest files when available
-----BEGIN PGP SIGNATURE-----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=atJQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.11-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.11
- Redirect AMO load/store access fault traps to guest
- Perf kvm stat support for RISC-V
- Use guest files for IMSIC virtualization, when available
ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA
extensions is coming through the RISC-V tree.
Pre-population has been requested several times to mitigate KVM page faults
during guest boot or after live migration. It is also required by TDX
before filling in the initial guest memory with measured contents.
Introduce it as a generic API.
Add a test case to exercise KVM_PRE_FAULT_MEMORY and run the guest to access the
pre-populated area. It tests KVM_PRE_FAULT_MEMORY ioctl for KVM_X86_DEFAULT_VM
and KVM_X86_SW_PROTECTED_VM.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <32427791ef42e5efaafb05d2ac37fa4372715f47.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wire KVM_PRE_FAULT_MEMORY ioctl to kvm_mmu_do_page_fault() to populate guest
memory. It can be called right after KVM_CREATE_VCPU creates a vCPU,
since at that point kvm_mmu_create() and kvm_init_mmu() are called and
the vCPU is ready to invoke the KVM page fault handler.
The helper function kvm_tdp_map_page() takes care of the logic to
process RET_PF_* return values and convert them to success or errno.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <9b866a0ae7147f96571c439e75429a03dcb659b6.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest memory population logic will need to know what page size or level
(4K, 2M, ...) is mapped.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <eabc3f3e5eb03b370cadf6e1901ea34d7a020adc.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the accounting of the result of kvm_mmu_do_page_fault() to its
callers, as only pf_fixed is common to guest page faults and async #PFs,
and upcoming support KVM_PRE_FAULT_MEMORY won't bump _any_ stats.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Account stat.pf_taken in kvm_mmu_page_fault(), i.e. the actual page fault
handler, instead of conditionally bumping it in kvm_mmu_do_page_fault().
The "real" page fault handler is the only path that should ever increment
the number of taken page faults, as all other paths that "do page fault"
are by definition not handling faults that occurred in the guest.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new ioctl KVM_PRE_FAULT_MEMORY in the KVM common code. It iterates on the
memory range and calls the arch-specific function. The implementation is
optional and enabled by a Kconfig symbol.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <819322b8f25971f2b9933bfa4506e618508ad782.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds documentation of KVM_PRE_FAULT_MEMORY ioctl. [1]
It populates guest memory. It doesn't do extra operations on the
underlying technology-specific initialization [2]. For example,
CoCo-related operations won't be performed. Concretely for TDX, this API
won't invoke TDH.MEM.PAGE.ADD() or TDH.MR.EXTEND(). Vendor-specific APIs
are required for such operations.
The key point is to adapt of vcpu ioctl instead of VM ioctl. First,
populating guest memory requires vcpu. If it is VM ioctl, we need to pick
one vcpu somehow. Secondly, vcpu ioctl allows each vcpu to invoke this
ioctl in parallel. It helps to scale regarding guest memory size, e.g.,
hundreds of GB.
[1] https://lore.kernel.org/kvm/Zbrj5WKVgMsUFDtb@google.com/
[2] https://lore.kernel.org/kvm/Ze-TJh0BBOWm9spT@google.com/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <9a060293c9ad9a78f1d8994cfe1311e818e99257.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The flags AS_UNMOVABLE and AS_INACCESSIBLE were both added just for guest_memfd;
AS_UNMOVABLE is already in existing versions of Linux, while AS_INACCESSIBLE was
acked for inclusion in 6.11.
But really, they are the same thing: only guest_memfd uses them, at least for
now, and guest_memfd pages are unmovable because they should not be
accessed by the CPU.
So merge them into one; use the AS_INACCESSIBLE name which is more comprehensive.
At the same time, this fixes an embarrassing bug where AS_INACCESSIBLE was used
as a bit mask, despite it being just a bit index.
The bug was mostly benign, because AS_INACCESSIBLE's bit representation (1010)
corresponded to setting AS_UNEVICTABLE (which is already set) and AS_ENOSPC
(except no async writes can happen on the guest_memfd). So the AS_INACCESSIBLE
flag simply had no effect.
Fixes: 1d23040caa ("KVM: guest_memfd: Use AS_INACCESSIBLE when creating guest_memfd inode")
Fixes: c72ceafbd1 ("mm: Introduce AS_INACCESSIBLE for encrypted/confidential memory")
Cc: linux-mm@kvack.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per-cpu struct kvm_steal_time is added here, its size is 64 bytes and
also defined as 64 bytes, so that the whole structure is in one physical
page.
When a VCPU is online, function pv_enable_steal_time() is called. This
function will pass guest physical address of struct kvm_steal_time and
tells hypervisor to enable steal time. When a vcpu is offline, physical
address is set as 0 and tells hypervisor to disable steal time.
Here is an output of vmstat on guest when there is workload on both host
and guest. It shows steal time stat information.
procs -----------memory---------- -----io---- -system-- ------cpu-----
r b swpd free inact active bi bo in cs us sy id wa st
15 1 0 7583616 184112 72208 20 0 162 52 31 6 43 0 20
17 0 0 7583616 184704 72192 0 0 6318 6885 5 60 8 5 22
16 0 0 7583616 185392 72144 0 0 1766 1081 0 49 0 1 50
16 0 0 7583616 184816 72304 0 0 6300 6166 4 62 12 2 20
18 0 0 7583632 184480 72240 0 0 2814 1754 2 58 4 1 35
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add ParaVirt steal time feature in host side, VM can search supported
features provided by KVM hypervisor, a feature KVM_FEATURE_STEAL_TIME
is added here. Like x86, steal time structure is saved in guest memory,
one hypercall function KVM_HCALL_FUNC_NOTIFY is added to notify KVM to
enable this feature.
One CPU attr ioctl command KVM_LOONGARCH_VCPU_PVTIME_CTRL is added to
save and restore the base address of steal time structure when a VM is
migrated.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
It seems redundant to check if pte is young before the call to
kvm_pte_mkyoung() in kvm_map_page_fast(). Just remove the check.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Jia Qingtong <jiaqingtong97@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Function kvm_map_page_fast() is fast path of secondary mmu page fault
flow, pfn is parsed from secondary mmu page table walker. However the
corresponding page reference is not added, it is dangerious to access
page out of mmu_lock.
Here page ref is added inside mmu_lock, function kvm_set_pfn_accessed()
and kvm_set_pfn_dirty() is called with page ref added, so that the page
will not be freed by others.
Also kvm_set_pfn_accessed() is removed here since it is called in the
following function kvm_release_pfn_clean().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add KVM_DIRTY_LOG_INITIALLY_SET support on LoongArch system, this
feature comes from other architectures like x86 and arm64.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When updating pmd entry such as allocating new pmd page or splitting
huge page into normal page, it is necessary to firstly update all pte
entries, and then update pmd entry.
It is weak order with LoongArch system, there will be problem if other
VCPUs see pmd update firstly while ptes are not updated. Here smp_wmb()
is added to assure this.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For readonly memslot such as UEFI BIOS or UEFI var space, guest cannot
write this memory space directly. So it is not necessary to track dirty
pages for readonly memslot. Here we make such optimization in function
kvm_arch_commit_memory_region().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently page level selection about secondary mmu depends on memory
slot and page level about host mmu. There will be problems if page level
of secondary mmu is zero already. Huge page cannot be selected if there is
normal page mapped in secondary mmu already, since it is not supported to
merge normal pages into huge pages now.
So page level selection should depend on the following three conditions.
1. Memslot is aligned for huge page and vm is not migrating.
2. Page level of host mmu is also huge page.
3. Page level of secondary mmu is suituable for huge page.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With hardware assisted virtualization, there are two level HW mmu, one
is GVA to GPA mapping, the other is GPA to HPA mapping which is called
secondary mmu in generic. If there is page fault for secondary mmu,
there needs tlb flush operation indexed with fault GPA address and VMID.
VMID is stored at register CSR.GSTAT and will be reload or recalculated
before guest entry.
Currently CSR.GSTAT is not saved and restored during VCPU context
switch, instead it is recalculated during guest entry. So CSR.GSTAT is
effective only when a VCPU runs in guest mode, however it may not be
effective if the VCPU exits to host mode. Since register CSR.GSTAT may
be stale, it may records the VMID of the last schedule-out VCPU, rather
than the current VCPU.
Function kvm_flush_tlb_gpa() should be called with its real VMID, so
here move it to the guest entrance. Also an arch-specific request id
KVM_REQ_TLB_FLUSH_GPA is added to flush tlb for secondary mmu, and it
can be optimized if VMID is updated, since all guest tlb entries will
be invalid if VMID is updated.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently interrupts are posted and cleared with the asynchronous mode,
meanwhile they are saved in SW state vcpu::arch::irq_pending and vcpu::
arch::irq_clear. When vcpu is ready to run, pending interrupt is written
back to CSR.ESTAT register from SW state vcpu::arch::irq_pending at the
guest entrance.
During VM migration stage, vcpu is put into stopped state, however
pending interrupts are not synced to CSR.ESTAT register. So there will
be interrupt lost when VCPU is migrated to another host machines.
Here in this patch when ESTAT CSR register is read from VMM user mode,
pending interrupts are synchronized to ESTAT also. So that VMM can get
correct pending interrupts.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This reverts commit eb9d53d4a9.
As Marc pointed out on the list [*], this patch is wrong, and those who
find themselves in the SOB chain should have their heads checked.
Annoyingly, the architecture has some FGT trap bits that are negative
(i.e. 0 implies trap), and there was some confusion how KVM handles
this for nested guests. However, it is clear now that KVM honors the
RES0-ness of FGT traps already, meaning traps for features never exposed
to the guest hypervisor get handled at L0. As they should.
Link: https://lore.kernel.org/kvmarm/86bk3c3uss.wl-maz@kernel.org/T/#mb9abb3dd79f6a4544a91cb35676bd637c3a5e836
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly set
the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that got
broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs
-----BEGIN PGP SIGNATURE-----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=XQ/x
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
- Fix unnecessary copy to 0 when kernel is booted at address 0.
- Fix usercopy crash when dumping dtl via debugfs.
- Avoid possible crash when PCI hotplug races with error handling.
- Fix kexec crash caused by scv being disabled before other CPUs call-in.
- Fix powerpc selftests build with USERCFLAGS set.
Thanks to: Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen, Nicholas
Piggin, Sourabh Jain, Srikar Dronamraju, Vishal Chourasia.
-----BEGIN PGP SIGNATURE-----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=B1pw
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix unnecessary copy to 0 when kernel is booted at address 0
- Fix usercopy crash when dumping dtl via debugfs
- Avoid possible crash when PCI hotplug races with error handling
- Fix kexec crash caused by scv being disabled before other CPUs
call-in
- Fix powerpc selftests build with USERCFLAGS set
Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.
* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build with USERCFLAGS set
powerpc/pseries: Fix scv instruction crash with kexec
powerpc/eeh: avoid possible crash when edev->pdev changes
powerpc/pseries: Whitelist dtl slub object for copying to userspace
powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
-I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
cache_shape.c ...
Fixes: 5553a79387 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZohO5hQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5dwCAQD981vQUMZysfy6xpQhVDjrn34tt/F9
lBDvrFuLWmiP7QD/c6p6RBNgxDlyj0wn2XA9/AhObpppC2yl4lvieZ6IwwE=
=exIi
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"A single bug fix to properly remove all of the securityfs IMA
measurement lists"
* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: fix wrong zero-assignment during securityfs dentry remove
-----BEGIN PGP SIGNATURE-----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=+HTh
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci update from Bjorn Helgaas:
- Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
Synopsys DesignWare eDMA driver and reflect that he is no longer at
Synopsys and isn't in a position to maintain the DesignWare xData
traffic generator (Bjorn Helgaas)
* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator
* A fix for the CMODX example in therecently added icache flushing
prctl().
* A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use.
* A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously.
* A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported.
* A build fix for the vector sigreturn selftest on clang.
* A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr().
* A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context.
-----BEGIN PGP SIGNATURE-----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=/Gsf
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
drivers:
- amd: mostly amdgpu display fixes + radeon vm NULL deref fix
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting
-----BEGIN PGP SIGNATURE-----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=F56S
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Daniel Vetter:
"Just small fixes all over here, all quiet as it should.
drivers:
- amd: mostly amdgpu display fixes + radeon vm NULL deref fix
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting"
* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/mcr: Avoid clobbering DSS steering
drm/xe: fix error handling in xe_migrate_update_pgtables
drm/ttm: Always take the bo delayed cleanup path for imported bos
drm/fbdev-generic: Fix framebuffer on big endian devices
drm/panthor: Fix sync-only jobs
drm/panthor: Don't check the array stride on empty uobj arrays
drm/amdgpu/atomfirmware: silence UBSAN warning
drm/radeon: check bo_va->bo is non-NULL before using it
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
drm/amd/display: Update efficiency bandwidth for dcn351
drm/amd/display: Fix refresh rate range for some panel
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
drm/amd/display: Add refresh rate range check
drm/amd/display: Reset freesync config before update new state
drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
drm: panel-orientation-quirks: Add quirk for Valve Galileo
drm/i915/display: For MTL+ platforms skip mg dp programming
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
firmware: sysfb: Fix reference count of sysfb parent device
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the "ngpios" property in gpio-mmio
-----BEGIN PGP SIGNATURE-----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=eXnz
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
driver:
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the 'ngpios' property in
gpio-mmio"
* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: add polarity quirk for TSC2005
gpio: mmio: do not calculate bgpio_bits via "ngpios"
gpiolib: of: fix lookup quirk for MIPS Lantiq
Contains the fixes for !chip->auth condition, preventing the breakage
of:
* tpm_ftpm_tee.c
* tpm_i2c_nuvoton.c
* tpm_ibmvtpm.c
* tpm_tis_i2c_cr50.c
* tpm_vtpm_proxy.c
All drivers will continue to work as they did in 6.9, except a single
warning (dev_warn() not WARN()) is printed to klog only to inform that
authenticated sessions are not enabled.
BR, Jarkko
Link: https://lore.kernel.org/linux-integrity/20240704185313.224318-1-jarkko@kernel.org/
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZofVuhIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9JDOgEA6HHoaCED+P7P51GK5xhm5Uzc6g4cCTyY
9bTTlBZ8UBgBAMHb7By1V+HfiRbvWV9h+Hd56oq4qMfseFJkC/VnuzUP
=1dCE
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fixes from Jarkko Sakkinen:
"This contains the fixes for !chip->auth condition, preventing the
breakage of:
- tpm_ftpm_tee.c
- tpm_i2c_nuvoton.c
- tpm_ibmvtpm.c
- tpm_tis_i2c_cr50.c
- tpm_vtpm_proxy.c
All drivers will continue to work as they did in 6.9, except a single
warning (dev_warn() not WARN()) is printed to klog only to inform that
authenticated sessions are not enabled"
* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
tpm: Address !chip->auth in tpm_buf_append_name()
tpm: Address !chip->auth in tpm2_*_auth_session()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaHstsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg2Qf+IUHv0lUOiPtbanMpwAWuXVLUFUOs
QxhzcKKmi/Det9gkgYA6SQEtr0nR22FIE50+lRFex9gCLeaFIizVCKtvm9vi5pKe
IpJ3sNAO88O/ehxurdBJ4ueADybruXyyKeQfpPKBoPiUAJpr85BYIpRbXwTyJTok
eCFQS39jvTN2YMyGrD7zdKBOcf3V3Da/m1v4f5bAx8nRYQNPLFX1GFbJG8gzQ8wN
DnYlDiKBzu8BOnBkdQh53Oz2e6a5gU3EHo9ZGITOr6Fmu4tGuXBkZ50pwaIdXD52
ZSZdMfbYJr7cWg2H6z3rqfIgO32uCGzHX7ZR8s3JbckVvQyaO4zL14ZW7w==
=szz2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Paolo Bonzini:
- s390: fix support for z16 systems
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: fix LPSWEY handling
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZofuWBYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uF40BAIVhv8jof7Rd6VIrb/LDDm6SujFR
p4bjDz5OZ6S95hvrAP46+Qf8hO8A+5n6jr34zd++KRKUtSSHYlWuuEb88NNIBw==
=xXC2
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.
