When using the tpm_tis-spi driver on a system missing the physical TPM,
a null pointer exception was observed.
[ 0.938677] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 0.939020] pgd = 10c753cb
[ 0.939237] [00000004] *pgd=00000000
[ 0.939808] Internal error: Oops: 5 [#1] SMP ARM
[ 0.940157] CPU: 0 PID: 48 Comm: kworker/u4:1 Not tainted 5.15.10-dd1e40c #1
[ 0.940364] Hardware name: Generic DT based system
[ 0.940601] Workqueue: events_unbound async_run_entry_fn
[ 0.941048] PC is at tpm_tis_remove+0x28/0xb4
[ 0.941196] LR is at tpm_tis_core_init+0x170/0x6ac
This is due to an attempt in 'tpm_tis_remove' to use the drvdata, which
was not initialized in 'tpm_tis_core_init' prior to the first error.
Move the initialization of drvdata earlier so 'tpm_tis_remove' has
access to it.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Fixes: 79ca6f74da ("tpm: fix Atmel TPM crash caused by too frequent queries")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some SPI controller drivers unregister the controller in the shutdown
handler (e.g. BCM2835). If such a controller is used with a TPM 2 slave
chip->ops may be accessed when it is already NULL:
At system shutdown the pre-shutdown handler tpm_class_shutdown() shuts down
TPM 2 and sets chip->ops to NULL. Then at SPI controller unregistration
tpm_tis_spi_remove() is called and eventually calls tpm_del_char_device()
which tries to shut down TPM 2 again. Thereby it accesses chip->ops again:
(tpm_del_char_device calls tpm_chip_start which calls tpm_clk_enable which
calls chip->ops->clk_enable).
Avoid the NULL pointer access by testing if chip->ops is valid and skipping
the TPM 2 shutdown procedure in case it is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Fixes: 39d0099f94 ("powerpc/pseries: Add shutdown() to vio_driver and vio_bus")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If something went wrong during the TPM firmware upgrade, like power
failure or the firmware image file get corrupted, the TPM might end
up in Upgrade or Failure mode upon the next start. The state is
persistent between the TPM power cycle/restart.
According to TPM specification:
* If the TPM is in Upgrade mode, it will answer with TPM2_RC_UPGRADE
to all commands except TPM2_FieldUpgradeData(). It may also accept
other commands if it is able to complete them using the previously
installed firmware.
* If the TPM is in Failure mode, it will allow performing TPM
initialization but will not provide any crypto operations.
Will happily respond to Field Upgrade calls.
Change the behavior of the tpm2_auto_startup(), so it detects the active
running mode of the TPM by adding the following checks. If
tpm2_do_selftest() call returns TPM2_RC_UPGRADE, the TPM is in Upgrade
mode.
If the TPM is in Failure mode, it will successfully respond to both
tpm2_do_selftest() and tpm2_startup() calls. Although, will fail to
answer to tpm2_get_cc_attrs_tbl(). Use this fact to conclude that TPM is
in Failure mode.
If detected that the TPM is in the Upgrade or Failure mode, the function
sets TPM_CHIP_FLAG_FIRMWARE_UPGRADE_MODE flag.
The TPM_CHIP_FLAG_FIRMWARE_UPGRADE_MODE flag is used later during driver
initialization/deinitialization to disable functionality which makes no
sense or will fail in the current TPM state. Following functionality is
affected:
* Do not register TPM as a hwrng
* Do not register sysfs entries which provide information impossible to
obtain in limited mode
* Do not register resource managed character device
Signed-off-by: axelj <axelj@axis.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Set TPM_FIRMWARE_POWER_MANAGED flag based on 'firmware-power-managed'
ACPI DSD property. For the CR50 TPM, this flag defaults to true when
the property is unset.
When this flag is set to false, the CR50 TPM driver will always send
a shutdown command whenever the system suspends.
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Commit 79ca6f74da ("tpm: fix Atmel TPM crash caused by too frequent
queries") has moved some code around without updating the error handling
path.
This is now pointless to 'goto out_err' when neither 'clk_enable()' nor
'ioremap()' have been called yet.
Make a direct return instead to avoid undoing things that have not been
done.
Fixes: 79ca6f74da ("tpm: fix Atmel TPM crash caused by too frequent queries")
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
To allow this device to fill the kernel's entropy pool at boot,
setup a default quality for the hwrng found in Cr50.
After some testing with rngtest and dieharder it was, in short,
discovered that the RNG produces fair quality randomness, giving
around 99.93% successes in rngtest FIPS140-2.
Notably, though, when testing with dieharder it was noticed that
we get 3 WEAK results over 114, which isn't optimal, and also
the p-values distribution wasn't uniform in all the cases, so a
conservative quality value was chosen by applying an arbitrary
penalty to the calculated values.
For reference, this is how the values were calculated:
The dieharder results were averaged, then normalized (0-1000)
and re-averaged with the rngtest result (where the result was
given a score of 99.93% of 1000, so 999.3), then aggregated
together and averaged again.
An arbitrary penalty of -100 was applied due to the retrieved
value, which brings us finally to 700.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Remove parameter descriptions from all static functions.
Remove the comment altogether that does not tell what the function does.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Locality is not appropriately requested before writing the int mask.
Add the missing boilerplate.
Fixes: e6aef069b6 ("tpm_tis: convert to using locality callbacks")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In commit c46ed2281b ("tpm_tis_spi: add missing SPI device ID entries")
we added SPI IDs for all the DT aliases to handle the fact that we always
use SPI modaliases to load modules even when probed via DT however the
mentioned commit missed that the SPI and OF device ID entries did not
match and were different and so DT nodes with compatible
"tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi
rather than just fix the existing one since what's currently there is
going to be better for anyone actually using SPI IDs to instantiate.
Fixes: c46ed2281b ("tpm_tis_spi: add missing SPI device ID entries")
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```
The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0 TPM 1.2 Version Info:
Chip Version: 1.2.66.1
Spec Level: 2
Errata Revision: 3
TPM Vendor ID: ATML
TPM Version: 01010000
Manufacturer Info: 41544d4c
```
The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.
A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.
To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.
References:
[1] 9f3fc7bcdd tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2] cf151a9a44 tpm: reduce tpm polling delay in tpm_tis_core
[3] 59f5a6b07f tpm: reduce poll sleep time in tpm_transmit()
[4] 424eaf910c tpm: reduce polling time to usecs for even finer
granularity
Fixes: 9f3fc7bcdd ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/
Signed-off-by: Hao Wu <hao.wu@rubrik.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The "4 * be32_to_cpu(data->count)" multiplication can potentially
overflow which would lead to memory corruption. Add a check for that.
Cc: stable@vger.kernel.org
Fixes: 745b361e98 ("tpm: infrastructure for TPM spaces")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
COMPILE_TEST is helpful to find compilation errors in other platform(e.g.X86).
In this case, the support of COMPILE_TEST is added, so this module could
be compiled in other platform(e.g.X86), without ARCH_SYNQUACER configuration.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When rngd is run as root then lots of these types of message will appear
in the kernel log if the TPM has been configured to provide random bytes:
[ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4
The issue is caused by the following call that is interrupted while
waiting for the TPM's response.
sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
Rather than waiting for the response in the low level driver, have it use
the polling loop in tpm_try_transmit() that uses a command's duration to
poll until a result has been returned by the TPM, thus ending when the
timeout has occurred but not responding to signals and ctrl-c anymore. To
stay in this polling loop extend tpm_ibmvtpm_status() to return
'true' for as long as the vTPM is indicated as being busy in
tpm_processing_cmd. Since the loop requires the TPM's timeouts, get them
now using tpm_get_timeouts() after setting the TPM2 version flag on the
chip.
To recreat the resolved issue start rngd like this:
sudo rngd -r /dev/hwrng -t
sudo rngd -r /dev/tpm0 -t
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1981473
Fixes: 6674ff145e ("tpm_ibmvtpm: properly handle interrupted packet receptions")
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: George Wilson <gcwilson@linux.ibm.com>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Way back when this driver was written the I2C framework
used to insist an ID table be defined even if the driver
did not use it in favor of ACPI/OF matching, so it was
added just to placate the hard I2C framework requirement.
This is no longer the case so we can drop the table and
also convert the driver to the new probe interface.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This fixes a minor bug which went unnoticed during the initial
driver upstreaming review: TCG_CR50 does not exist in mainline
kernels, so remove it.
Fixes: 3a253caaad ("char: tpm: add i2c driver for cr50")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
dma-buf backed shared memory cannot be reliably freed and unregistered
during a kexec operation even when tee_shm_free() is called on the shm
from a .shutdown hook. The problem occurs because dma_buf_put() calls
fput() which then uses task_work_add(), with the TWA_RESUME parameter,
to queue tee_shm_release() to be called before the current task returns
to user mode. However, the current task never returns to user mode
before the kexec completes so the memory is never freed nor
unregistered.
Use tee_shm_alloc_kernel_buf() to avoid dma-buf backed shared memory
allocation so that tee_shm_free() can directly call tee_shm_release().
This will ensure that the shm can be freed and unregistered during a
kexec operation.
Fixes: 09e574831b ("tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE")
Fixes: 1760eb689e ("tpm/tpm_ftpm_tee: add shutdown call back")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Do not tear down the system when getting invalid status from a TPM chip.
This can happen when panic-on-warn is used.
Instead, introduce TPM_TIS_INVALID_STATUS bitflag and use it to trigger
once the error reporting per chip. In addition, print out the value of
TPM_STS for improved forensics.
Link: https://lore.kernel.org/keyrings/YKzlTR1AzUigShtZ@kroah.com/
Fixes: 55707d531a ("tpm_tis: Add a check for invalid status")
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DEFINE_RES_MEM() to save a couple of lines of code, which is simpler
and more readable. The start address does not need to appear twice.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Fix the following make W=1 warnings:
drivers/char/tpm/tpm1-cmd.c:325: warning: expecting prototype for tpm_startup(). Prototype was for tpm1_startup() instead
drivers/char/tpm/tpm1-cmd.c:621: warning: expecting prototype for tpm_continue_selftest(). Prototype was for tpm1_continue_selftest() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that this module won't auto-load if a DT has
for example has a node with a compatible "infineon,slb9670" string.
In that case kmod will expect a "MODALIAS=of:N*T*Cinfineon,slb9670" uevent
but instead will get a "MODALIAS=spi:slb9670", which is not present in the
kernel module aliases:
$ modinfo drivers/char/tpm/tpm_tis_spi.ko | grep alias
alias: of:N*T*Cgoogle,cr50C*
alias: of:N*T*Cgoogle,cr50
alias: of:N*T*Ctcg,tpm_tis-spiC*
alias: of:N*T*Ctcg,tpm_tis-spi
alias: of:N*T*Cinfineon,slb9670C*
alias: of:N*T*Cinfineon,slb9670
alias: of:N*T*Cst,st33htpm-spiC*
alias: of:N*T*Cst,st33htpm-spi
alias: spi:cr50
alias: spi:tpm_tis_spi
alias: acpi*:SMO0768:*
To workaround this issue, add in the SPI device ID table all the entries
that are present in the OF device ID table.
Reported-by: Alexander Wellbrock <a.wellbrock@mailbox.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
While running a TPM2_CC_VERIFY_SIGNATURE operation with RSA 3072-bit
keys the TPM driver fails with the following error:
"kernel: [ 2416.187522] tpm tpm0: Operation Timed out"
Since the TPM PC Client specification does not specify a number for
verify signature operation timeout, and the duration of
TPM2_CC_VERIFY_SIGNATURE with RSA 3072-bit keys exceeds the current timeout
of TPM_LONG (2 seconds), it is preferable to pick the longest timeout
possible.
Therefore, set the duration for TPM2_CC_VERIFY_SIGNATUE to TPM_LONG_LONG
(5 minutes).
[jarkko@kernel.org: mangled the short summary a bit]
Link: https://trustedcomputinggroup.org/resource/pc-client-specific-platform-firmware-profile-specification/
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable because of requesting.
Link: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In DSDT table, TPM _CID was SMO0768, and no _HID definition. After a
kernel upgrade from 4.19 to 5.10, TPM probe function was changed which
causes device probe fails. In order to make newer kernel to be
compatible with the older acpi definition, it would be best set default
probe function.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This is to simplify the code, and IOMEM_ERR_PTR(err) is same with
(__force void __iomem *)ERR_PTR(err).
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If the total number of commands queried through TPM2_CAP_COMMANDS is
different from that queried through TPM2_CC_GET_CAPABILITY, it indicates
an unknown error. In this case, an appropriate error code -EFAULT should
be returned. However, we currently do not explicitly assign this error
code to 'rc'. As a result, 0 was incorrectly returned.
Cc: stable@vger.kernel.org
Fixes: 58472f5cd4f6("tpm: validate TPM 2.0 commands")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reserve locality in tpm_tis_resume(), as it could be unsert after waking
up from a sleep state.
Cc: stable@vger.kernel.org
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The earlier fix (linked) only partially fixed the locality handling bug
in tpm_tis_gen_interrupt(), i.e. only for TPM 1.x.
Extend the locality handling to cover TPM2.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-integrity/20210220125534.20707-1-jarkko@kernel.org/
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 3a253caaad ("char: tpm: add i2c driver for cr50")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Avoid allocating memory and reading the host log when a virtual device
is used since this log is of no use to that driver. A virtual
device can be identified through the flag TPM_CHIP_FLAG_VIRTUAL, which
is only set for the tpm_vtpm_proxy driver.
Cc: stable@vger.kernel.org
Fixes: 6f99612e25 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Check the eventlog signature before using it. This avoids using an
empty log, as may be the case when QEMU created the ACPI tables,
rather than probing the EFI log next. This resolves an issue where
the EFI log was empty since an empty ACPI log was used.
Cc: stable@vger.kernel.org
Fixes: 85467f63a0 ("tpm: Add support for event log pointer found in TPM2 ACPI table")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When tpm_read_log_efi is called multiple times, which happens when
one loads and unloads a TPM2 driver multiple times, then the global
variable efi_tpm_final_log_size will at some point become a negative
number due to the subtraction of final_events_preboot_size occurring
each time. Use a local variable to avoid this integer underflow.
The following issue is now resolved:
Mar 8 15:35:12 hibinst kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Mar 8 15:35:12 hibinst kernel: Workqueue: tpm-vtpm vtpm_proxy_work [tpm_vtpm_proxy]
Mar 8 15:35:12 hibinst kernel: RIP: 0010:__memcpy+0x12/0x20
Mar 8 15:35:12 hibinst kernel: Code: 00 b8 01 00 00 00 85 d2 74 0a c7 05 44 7b ef 00 0f 00 00 00 c3 cc cc cc 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4
Mar 8 15:35:12 hibinst kernel: RSP: 0018:ffff9ac4c0fcfde0 EFLAGS: 00010206
Mar 8 15:35:12 hibinst kernel: RAX: ffff88f878cefed5 RBX: ffff88f878ce9000 RCX: 1ffffffffffffe0f
Mar 8 15:35:12 hibinst kernel: RDX: 0000000000000003 RSI: ffff9ac4c003bff9 RDI: ffff88f878cf0e4d
Mar 8 15:35:12 hibinst kernel: RBP: ffff9ac4c003b000 R08: 0000000000001000 R09: 000000007e9d6073
Mar 8 15:35:12 hibinst kernel: R10: ffff9ac4c003b000 R11: ffff88f879ad3500 R12: 0000000000000ed5
Mar 8 15:35:12 hibinst kernel: R13: ffff88f878ce9760 R14: 0000000000000002 R15: ffff88f77de7f018
Mar 8 15:35:12 hibinst kernel: FS: 0000000000000000(0000) GS:ffff88f87bd00000(0000) knlGS:0000000000000000
Mar 8 15:35:12 hibinst kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 8 15:35:12 hibinst kernel: CR2: ffff9ac4c003c000 CR3: 00000001785a6004 CR4: 0000000000060ee0
Mar 8 15:35:12 hibinst kernel: Call Trace:
Mar 8 15:35:12 hibinst kernel: tpm_read_log_efi+0x152/0x1a7
Mar 8 15:35:12 hibinst kernel: tpm_bios_log_setup+0xc8/0x1c0
Mar 8 15:35:12 hibinst kernel: tpm_chip_register+0x8f/0x260
Mar 8 15:35:12 hibinst kernel: vtpm_proxy_work+0x16/0x60 [tpm_vtpm_proxy]
Mar 8 15:35:12 hibinst kernel: process_one_work+0x1b4/0x370
Mar 8 15:35:12 hibinst kernel: worker_thread+0x53/0x3e0
Mar 8 15:35:12 hibinst kernel: ? process_one_work+0x370/0x370
Cc: stable@vger.kernel.org
Fixes: 166a2809d6 ("tpm: Don't duplicate events from the final event log in the TCG2 log")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
One non-fix, the conversion of vio_driver->remove() to return void, which
touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause soft/hard
lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is offline in the
second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only be seen
when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to:
Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph Plattner, Greg
Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria, Tyrel Datwyler, Uwe
Kleine-König.
-----BEGIN PGP SIGNATURE-----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=Jpjh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One non-fix, the conversion of vio_driver->remove() to return void,
which touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause
soft/hard lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is
offline in the second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only
be seen when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph
Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria,
Tyrel Datwyler, and Uwe Kleine-König"
* tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/sstep: Fix VSX instruction emulation
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
powerpc: Force inlining of mmu_has_feature to fix build failure
vio: make remove callback return void
powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()
powerpc/603: Fix protection of user pages mapped with PROT_NONE
powerpc/pseries: Don't enforce MSI affinity with kdump
powerpc/4xx: Fix build errors from mfdcr()
Somewhere along the line, probably during a rebase, an unintentional
dump_stack() got included. Revert this change.
Reported-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Fixes: 90cba8d20f ("tpm/ppi: Constify static struct attribute_group")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct vio_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea.
Note there are two nominally different implementations for a vio bus:
one in arch/sparc/kernel/vio.c and the other in
arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc
one.
Before this patch for a device that was bound to a driver without a
remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device
core still considers the device unbound after vio_bus_remove() returns
calling this unconditionally is the consistent behaviour which is
implemented here.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mpe: Drop unneeded hvcs_remove() forward declaration, squash in
change from sfr to drop ibmvnic_remove() forward declaration]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org
This is shown with Samsung Chromebook Pro (Caroline) with TPM 1.2
(SLB 9670):
[ 4.324298] TPM returned invalid status
[ 4.324806] WARNING: CPU: 2 PID: 1 at drivers/char/tpm/tpm_tis_core.c:275 tpm_tis_status+0x86/0x8f
Background
==========
TCG PC Client Platform TPM Profile (PTP) Specification, paragraph 6.1 FIFO
Interface Locality Usage per Register, Table 39 Register Behavior Based on
Locality Setting for FIFO - a read attempt to TPM_STS_x Registers returns
0xFF in case of lack of locality.
The fix
=======
Decorate tpm_tis_gen_interrupt() with request_locality() and
release_locality().
Cc: Laurent Bigonville <bigon@debian.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This is shown with Samsung Chromebook Pro (Caroline) with TPM 1.2
(SLB 9670):
[ 4.324298] TPM returned invalid status
[ 4.324806] WARNING: CPU: 2 PID: 1 at drivers/char/tpm/tpm_tis_core.c:275 tpm_tis_status+0x86/0x8f
Background
==========
TCG PC Client Platform TPM Profile (PTP) Specification, paragraph 6.1 FIFO
Interface Locality Usage per Register, Table 39 Register Behavior Based on
Locality Setting for FIFO - a read attempt to TPM_STS_x Registers returns
0xFF in case of lack of locality.
The fix
=======
Decorate tpm_get_timeouts() with request_locality() and release_locality().
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Laurent Bigonville <bigon@debian.org>
Cc: stable@vger.kernel.org
Reported-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT
need to be done as a one single atom.
Take the TPM chip ownership before sending anything with
tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send
TPM commands instead of tpm_send(), reverting back to the old behaviour.
Fixes: 2e19e10131 ("KEYS: trusted: Move TPM2 trusted keys code")
Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Acked-by Sumit Garg <sumit.garg@linaro.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The only usage of ppi_attr_grp is to put its address in an array of
pointers to const struct attribute_group. Make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Create sysfs per hash groups with 24 PCR files in them one group,
named pcr-<hash>, for each agile hash of the TPM. The files are
plugged in to a PCR read function which is TPM version agnostic, so
this works also for TPM 1.2 but the hash is only sha1 in that case.
Note: the macros used to create the hashes emit spurious checkpatch
warnings. Do not try to "fix" them as checkpatch recommends, otherwise
they'll break.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Never used since it was added.
Fixes: 9e1b74a63f ("tpm: add support for nonblocking operation")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-integrity@vger.kernel.org
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Philip Tricca <philip.b.tricca@intel.com>
Cc: Tadeusz Struk <tadeusz.struk@intel.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add TPM 2.0 compatible I2C interface for chips with cr50 firmware.
The firmware running on the currently supported H1 MCU requires a
special driver to handle its specific protocol, and this makes it
unsuitable to use tpm_tis_core_* and instead it must implement the
underlying TPM protocol similar to the other I2C TPM drivers.
- All 4 bytes of status register must be read/written at once.
- FIFO and burst count is limited to 63 and must be drained by AP.
- Provides an interrupt to indicate when read response data is ready
and when the TPM is finished processing write data.
This driver is based on the existing infineon I2C TPM driver, which
most closely matches the cr50 i2c protocol behavior.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Tested-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The current release locality code seems to be based on the
misunderstanding that the TPM interrupts when a locality is released:
it doesn't, only when the locality is acquired.
Furthermore, there seems to be no point in waiting for the locality to
be released. All it does is penalize the last TPM user. However, if
there's no next TPM user, this is a pointless wait and if there is a
next TPM user, they'll pay the penalty waiting for the new locality
(or possibly not if it's the same as the old locality).
Fix the code by making release_locality as simple write to release
with no waiting for completion.
Cc: stable@ger.kernel.org
Fixes: 33bafe9082 ("tpm_tis: verify locality released before returning from release_locality")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The TPM TIS specification says the TPM signals the acquisition of locality
when the TMP_ACCESS_REQUEST_USE bit goes to one *and* the
TPM_ACCESS_REQUEST_USE bit goes to zero. Currently we only check the
former not the latter, so check both. Adding the check on
TPM_ACCESS_REQUEST_USE should fix the case where the locality is
re-requested before the TPM has released it. In this case the locality may
get released briefly before it is reacquired, which causes all sorts of
problems. However, with the added check, TPM_ACCESS_REQUEST_USE should
remain 1 until the second request for the locality is granted.
Cc: stable@ger.kernel.org
Fixes: 27084efee0 ("[PATCH] tpm: driver for next generation TPM chips")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Mimic the pre-existing ACPI and Device Tree event log behavior by not
creating the binary_bios_measurements file when the EFI TPM event log is
empty.
This fixes the following NULL pointer dereference that can occur when
reading /sys/kernel/security/tpm0/binary_bios_measurements after the
kernel received an empty event log from the firmware:
BUG: kernel NULL pointer dereference, address: 000000000000002c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17
Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019
RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550
Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49
RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010
RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258
RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300
R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280
R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258
FS: 00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __kmalloc_node+0x113/0x320
? kvmalloc_node+0x31/0x80
seq_read+0x94/0x420
vfs_read+0xa7/0x190
ksys_read+0xa7/0xe0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In this situation, the bios_event_log pointer in the tpm_bios_log struct
was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was
due to the following kmemdup() in tpm_read_log_efi():
int tpm_read_log_efi(struct tpm_chip *chip)
{
...
/* malloc EventLog space */
log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL);
if (!log->bios_event_log) {
ret = -ENOMEM;
goto out;
}
...
}
When log_size is zero, due to an empty event log from firmware,
ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the
binary_bios_measurements file, the tpm2_bios_measurements_start()
function does not perform a ZERO_OR_NULL_PTR() check on the
bios_event_log pointer before dereferencing it.
Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of
the bios_event_log pointer, simply avoid creating the
binary_bios_measurements_file as is done in other event log retrieval
backends.
Explicitly ignore all of the events in the final event log when the main
event log is empty. The list of events in the final event log cannot be
accurately parsed without referring to the first event in the main event
log (the event log header) so the final event log is useless in such a
situation.
Fixes: 58cc1e4faf ("tpm: parse TPM event logs based on EFI table")
Link: https://lore.kernel.org/linux-integrity/E1FDCCCB-CA51-4AEE-AC83-9CDE995EAE52@canonical.com/
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Thiébaud Weksteen <tweek@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some TIS based TPMs can return 0xff to status reads if the locality
hasn't been properly requested. Detect this condition by checking the
bits that the TIS spec specifies must return zero are clear and return
zero in that case. Also drop a warning so the problem can be
identified in the calling path and fixed (usually a missing
try_get_ops()).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO
window that is backed by the SPI command sequencer in the SPI bus
controller. This arrangement has the limitation that only byte size
accesses are supported, and so we'll need to provide a separate module
that take this into account.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
