Allocate a new hugetlb_vma_lock structure and hang off vm_private_data for
synchronization use by vmas that could be involved in pmd sharing. This
data structure contains a rw semaphore that is the primary tool used for
synchronization.
This new structure is ref counted, so that it can exist when NOT attached
to a vma. This is only helpful in resolving lock ordering issues where
code may need to obtain the vma_lock while there are no guarantees the vma
may go away. By obtaining a ref on the structure, it can be guaranteed
that at least the rw semaphore will not go away.
Only add infrastructure for the new lock here. Actual use will be added
in subsequent patches.
[mike.kravetz@oracle.com: fix build issue for missing hugetlb_vma_lock_release]
Link: https://lkml.kernel.org/r/YyNUtA1vRASOE4+M@monkey
Link: https://lkml.kernel.org/r/20220914221810.95771-7-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename the routine vma_shareable to vma_addr_pmd_shareable as it is
checking a specific address within the vma. Refactor code to check if an
aligned range is shareable as this will be needed in a subsequent patch.
Link: https://lkml.kernel.org/r/20220914221810.95771-6-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
remove_huge_page removes a hugetlb page from the page cache. Change to
hugetlb_delete_from_page_cache as it is a more descriptive name.
huge_add_to_page_cache is global in scope, but only deals with hugetlb
pages. For consistency and clarity, rename to hugetlb_add_to_page_cache.
Link: https://lkml.kernel.org/r/20220914221810.95771-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") added code to take i_mmap_rwsem in read mode for the
duration of fault processing. However, this has been shown to cause
performance/scaling issues. Revert the code and go back to only taking
the semaphore in huge_pmd_share during the fault path.
Keep the code that takes i_mmap_rwsem in write mode before calling
try_to_unmap as this is required if huge_pmd_unshare is called.
NOTE: Reverting this code does expose the following race condition.
Faulting thread Unsharing thread
... ...
ptep = huge_pte_offset()
or
ptep = huge_pte_alloc()
...
i_mmap_lock_write
lock page table
ptep invalid <------------------------ huge_pmd_unshare()
Could be in a previously unlock_page_table
sharing process or worse i_mmap_unlock_write
...
ptl = huge_pte_lock(ptep)
get/update pte
set_pte_at(pte, ptep)
It is unknown if the above race was ever experienced by a user. It was
discovered via code inspection when initially addressed.
In subsequent patches, a new synchronization mechanism will be added to
coordinate pmd sharing and eliminate this race.
Link: https://lkml.kernel.org/r/20220914221810.95771-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", v2.
hugetlb fault scalability regressions have recently been reported [1].
This is not the first such report, as regressions were also noted when
commit c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") was added [2] in v5.7. At that time, a proposal to
address the regression was suggested [3] but went nowhere.
The regression and benefit of this patch series is not evident when
using the vm_scalability benchmark reported in [2] on a recent kernel.
Results from running,
"./usemem -n 48 --prealloc --prefault -O -U 3448054972"
48 sample Avg
next-20220913 next-20220913 next-20220913
unmodified revert i_mmap_sema locking vma sema locking, this series
-----------------------------------------------------------------------------
498150 KB/s 501934 KB/s 504793 KB/s
The recent regression report [1] notes page fault and fork latency of
shared hugetlb mappings. To measure this, I created two simple programs:
1) map a shared hugetlb area, write fault all pages, unmap area
Do this in a continuous loop to measure faults per second
2) map a shared hugetlb area, write fault a few pages, fork and exit
Do this in a continuous loop to measure forks per second
These programs were run on a 48 CPU VM with 320GB memory. The shared
mapping size was 250GB. For comparison, a single instance of the program
was run. Then, multiple instances were run in parallel to introduce
lock contention. Changing the locking scheme results in a significant
performance benefit.
test instances unmodified revert vma
--------------------------------------------------------------------------
faults per sec 1 393043 395680 389932
faults per sec 24 71405 81191 79048
forks per sec 1 2802 2747 2725
forks per sec 24 439 536 500
Combined faults 24 1621 68070 53662
Combined forks 24 358 67 142
Combined test is when running both faulting program and forking program
simultaneously.
Patches 1 and 2 of this series revert c0d0381ade and 87bf91d39b which
depends on c0d0381ade. Acquisition of i_mmap_rwsem is still required in
the fault path to establish pmd sharing, so this is moved back to
huge_pmd_share. With c0d0381ade reverted, this race is exposed:
Faulting thread Unsharing thread
... ...
ptep = huge_pte_offset()
or
ptep = huge_pte_alloc()
...
i_mmap_lock_write
lock page table
ptep invalid <------------------------ huge_pmd_unshare()
Could be in a previously unlock_page_table
sharing process or worse i_mmap_unlock_write
...
ptl = huge_pte_lock(ptep)
get/update pte
set_pte_at(pte, ptep)
Reverting 87bf91d39b exposes races in page fault/file truncation. When
the new vma lock is put to use in patch 8, this will handle the fault/file
truncation races. This is explained in patch 9 where code associated with
these races is cleaned up.
Patches 3 - 5 restructure existing code in preparation for using the new
vma lock (rw semaphore) for pmd sharing synchronization. The idea is that
this semaphore will be held in read mode for the duration of fault
processing, and held in write mode for unmap operations which may call
huge_pmd_unshare. Acquiring i_mmap_rwsem is also still required to
synchronize huge pmd sharing. However it is only required in the fault
path when setting up sharing, and will be acquired in huge_pmd_share().
Patch 6 adds the new vma lock and all supporting routines, but does not
actually change code to use the new lock.
Patch 7 refactors code in preparation for using the new lock. And, patch
8 finally adds code to make use of this new vma lock. Unfortunately, the
fault code and truncate/hole punch code would naturally take locks in the
opposite order which could lead to deadlock. Since the performance of
page faults is more important, the truncation/hole punch code is modified
to back out and take locks in the correct order if necessary.
[1] https://lore.kernel.org/linux-mm/43faf292-245b-5db5-cce9-369d8fb6bd21@infradead.org/
[2] https://lore.kernel.org/lkml/20200622005551.GK5535@shao2-debian/
[3] https://lore.kernel.org/linux-mm/20200706202615.32111-1-mike.kravetz@oracle.com/
This patch (of 9):
Commit c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") added code to take i_mmap_rwsem in read mode for the
duration of fault processing. The use of i_mmap_rwsem to prevent
fault/truncate races depends on this. However, this has been shown to
cause performance/scaling issues. As a result, that code will be
reverted. Since the use i_mmap_rwsem to address page fault/truncate races
depends on this, it must also be reverted.
In a subsequent patch, code will be added to detect the fault/truncate
race and back out operations as required.
Link: https://lkml.kernel.org/r/20220914221810.95771-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220914221810.95771-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pointer variables allocate memory first, and then judge. There is no need
to initialize the assignment.
Link: https://lkml.kernel.org/r/20220914012113.6271-1-xupengfei@nfschina.com
Signed-off-by: XU pengfei <xupengfei@nfschina.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's only used in mm/filemap.c, since commit <ffa65753c431>
("mm/migrate.c: rework migration_entry_wait() to not take a pageref").
Make it static.
Link: https://lkml.kernel.org/r/20220914021738.3228011-1-sunke@kylinos.cn
Signed-off-by: Ke Sun <sunke@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The memory-notify-based approach aims to handle meory-less nodes, however,
it just adds the complexity of code as pointed by David in thread [1].
The handling of memory-less nodes is introduced by commit 4faf8d950e
("hugetlb: handle memory hot-plug events"). >From its commit message, we
cannot find any necessity of handling this case. So, we can simply
register/unregister sysfs entries in register_node/unregister_node to
simlify the code.
BTW, hotplug callback added because in hugetlb_register_all_nodes() we
register sysfs nodes only for N_MEMORY nodes, seeing commit 9b5e5d0fdc,
which said it was a preparation for handling memory-less nodes via memory
hotplug. Since we want to remove memory hotplug, so make sure we only
register per-node sysfs for online (N_ONLINE) nodes in
hugetlb_register_all_nodes().
https://lore.kernel.org/linux-mm/60933ffc-b850-976c-78a0-0ee6e0ea9ef0@redhat.com/ [1]
Link: https://lkml.kernel.org/r/20220914072603.60293-3-songmuchun@bytedance.com
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "simplify handling of per-node sysfs creation and removal",
v4.
This patch (of 2):
The following commit offload per-node sysfs creation and removal to a
kworker and did not say why it is needed. And it also said "I don't know
that this is absolutely required". It seems like the author was not sure
as well. Since it only complicates the code, this patch will revert the
changes to simplify the code.
39da08cb07 ("hugetlb: offload per node attribute registrations")
We could use memory hotplug notifier to do per-node sysfs creation and
removal instead of inserting those operations to node registration and
unregistration. Then, it can reduce the code coupling between node.c and
hugetlb.c. Also, it can simplify the code.
Link: https://lkml.kernel.org/r/20220914072603.60293-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220914072603.60293-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace the simple calculation with PAGE_ALIGN.
Link: https://lkml.kernel.org/r/20220913015505.1998958-1-zuoze1@huawei.com
Signed-off-by: ze zuo <zuoze1@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The name "check_free_page()" provides no information regarding its return
value when the page is indeed found to be bad.
Renaming it to "free_page_is_bad()" makes it clear that a `true' return
value means the page was bad.
And make it return a bool, not an int.
[akpm@linux-foundation.org: don't use bool as int]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: ke.wang <ke.wang@unisoc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Zhaoyang Huang <huangzhaoyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use kstrtobool which is more powerful to handle all kinds of parameters
like 'Yy1Nn0' or [oO][NnFf] for "on" and "off".
Link: https://lkml.kernel.org/r/20220913071358.1812206-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the 'kdamond_wait_activation()' function or 'after_sampling()' or
'after_aggregation()' DAMON callbacks return an error, it is unnecessary
to use bool 'done' to check if kdamond should be finished. This commit
simplifies the kdamond stop mechanism by removing 'done' and break the
while loop directly in the cases.
Link: https://lkml.kernel.org/r/1663060287-30201-4-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can initialize the variable 'pid' with '-1' in pid_show() to simplify
the variable assignment operation and make the code more readable.
Link: https://lkml.kernel.org/r/1663060287-30201-3-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_lru_sort_new_{hot,cold}_scheme() have quite a lot of duplicates.
This commit factors out the duplicate to a separate function and use it
for reducing the duplicate.
Link: https://lkml.kernel.org/r/20220913174449.50645-23-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON_LRU_SORT to generate the module parameters for
DAMOS watermarks using the generator macro to simplify the code and reduce
duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-22-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON_RECLAIM to generate the module parameters for
DAMOS quotas using the generator macro to simplify the code and reduce
duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-21-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT have module parameters for DAMOS time quota only but size
quota. This commit implements a macro for generating the module
parameters so that we can reuse later.
Link: https://lkml.kernel.org/r/20220913174449.50645-20-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM and DAMON_LRU_SORT have module parameters for DAMOS quotas
that having same names. This commit implements a macro for generating
such module parameters so that we can reuse later.
Link: https://lkml.kernel.org/r/20220913174449.50645-19-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON_LRU_SORT to generate the module parameters for
DAMOS statistics using the generator macro to simplify the code and reduce
duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-18-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON_RECLAIM to generate the module parameters for
DAMOS statistics using the generator macro to simplify the code and
reduce duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-17-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM and DAMON_LRU_SORT have module parameters for DAMOS
statistics that having same names. This commit implements a macro for
generating such module parameters so that we can reuse later.
Link: https://lkml.kernel.org/r/20220913174449.50645-16-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON_RECLAIM to generate the module parameters for
DAMOS watermarks using the generator macro to simplify the code and reduce
duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-15-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON_LRU_SORT to generate the module parameters for
DAMOS watermarks using the generator macro to simplify the code and reduce
duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM and DAMON_LRU_SORT have module parameters for watermarks
that having same names. This commit implements a macro for generating
such module parameters so that we can reuse later.
Link: https://lkml.kernel.org/r/20220913174449.50645-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON_RECLAIM to generate the module parameters for
DAMON monitoring attributes using the generator macro to simplify the code
and reduce duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON_LRU_SORT to generate the module parameters for
DAMON monitoring attributes using the generator macro to simplify the code
and reduce duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM and DAMON_LRU_SORT have module parameters for monitoring
attributes that having same names. This commot implements a macro for
generating such module parameters so that we can reuse later.
Link: https://lkml.kernel.org/r/20220913174449.50645-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT receives monitoring attributes by parameters one by one to
separate variables, and then combines those into 'struct damon_attrs'.
This commit makes the module directly stores the parameter values to a
static 'struct damon_attrs' variable and use it to simplify the code.
Link: https://lkml.kernel.org/r/20220913174449.50645-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM receives monitoring attributes by parameters one by one to
separate variables, and then combine those into 'struct damon_attrs'.
This commit makes the module directly stores the parameter values to a
static 'struct damon_attrs' variable and use it to simplify the code.
Link: https://lkml.kernel.org/r/20220913174449.50645-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Number of parameters for 'damon_set_attrs()' is six. As it could be
confusing and verbose, this commit reduces the number by receiving single
pointer to a 'struct damon_attrs'.
Link: https://lkml.kernel.org/r/20220913174449.50645-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON monitoring attributes are directly defined as fields of 'struct
damon_ctx'. This makes 'struct damon_ctx' a little long and complicated.
This commit defines and uses a struct, 'struct damon_attrs', which is
dedicated for only the monitoring attributes to make the purpose of the
five values clearer and simplify 'struct damon_ctx'.
Link: https://lkml.kernel.org/r/20220913174449.50645-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The 'struct damos' creation function, 'damon_new_scheme()', does
initialization of private fileds of 'struct damos_quota' in it. As its
verbose and makes the function unnecessarily long, this commit factors it
out to separate function.
Link: https://lkml.kernel.org/r/20220913174449.50645-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function for new 'struct damos' creation, 'damon_new_scheme()', copies
each field of the struct one by one, though it could simply copied via
struct to struct. This commit replaces the unnecessarily verbose
field-to-field copies with struct-to-struct copies to make code simple and
short.
Link: https://lkml.kernel.org/r/20220913174449.50645-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The bodies of damon_pa_{mark_accessed,deactivate_pages}() contains
duplicates. This commit factors out the common part to a separate
function and removes the duplicates.
Link: https://lkml.kernel.org/r/20220913174449.50645-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: cleanup code".
DAMON code was not so clean from the beginning, but it has been too much
nowadays, especially due to the duplicates in DAMON_RECLAIM and
DAMON_LRU_SORT. This patchset cleans some of the mess.
This patch (of 22):
The 'switch-case' statement in 'damon_va_apply_scheme()' function provides
a 'case' for every supported DAMOS action while all not-yet-supported
DAMOS actions fall through the 'default' case, and comment it so that
people can easily know which actions are supported. Its counterpart in
'paddr', 'damon_pa_apply_scheme()', however, doesn't. This commit makes
the 'paddr' side function follows the pattern of 'vaddr' for better
readability and consistency.
Link: https://lkml.kernel.org/r/20220913174449.50645-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220913174449.50645-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In damon_lru_sort_apply_parameters(), we can use damon_set_schemes() to
replace the way of creating the first 'scheme' in original code, this
makes the code look cleaner.
Link: https://lkml.kernel.org/r/20220911005917.835-1-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kdamond is implemented as a periodical split-merge pattern, which will
create and destroy regions possibly at high frequency (hundreds or even
thousands of per sec), depending on the number of regions and aggregation
period. In that case, kmalloc and kfree could bring speed and space
overheads, which can be improved by using a private kmem cache.
[set_pte_at@outlook.com: creating kmem cache for damon regions by KMEM_CACHE()]
Link: https://lkml.kernel.org/r/Message-ID:
Link: https://lkml.kernel.org/r/TYCP286MB2323DA1894FA55BB9CF90978CA449@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can use the 'damon_sysfs_kdamond_running()' wrapper directly to check
if the kdamond is running in 'damon_sysfs_turn_damon_on()'.
Link: https://lkml.kernel.org/r/1662995513-24489-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There's no need to run container_of() as early as we do.
The compiler figures this out, but the resulting code is more readable.
Link: https://lkml.kernel.org/r/20220908081932.77370-1-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A user who reads THP_ZERO_PAGE_ALLOC may be more concerned about the huge
zero pages that are really allocated for thp. It is misleading to
increase THP_ZERO_PAGE_ALLOC twice if two threads call get_huge_zero_page
concurrently. Don't increase the value if the huge page is not really
used.
Update Documentation/admin-guide/mm/transhuge.rst to suit.
Link: https://lkml.kernel.org/r/20220909021653.3371879-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To handle the discontiguous case, mem_map_next() has a parameter named
`offset`. As a function caller, one would be confused why "get next
entry" needs a parameter named "offset". The other drawback of
mem_map_next() is that the callers must take care of the map between
parameter "iter" and "offset", otherwise we may get an hole or duplication
during iteration. So we use nth_page instead of mem_map_next.
And replace mem_map_offset with nth_page() per Matthew's comments.
Link: https://lkml.kernel.org/r/1662708669-9395-1-git-send-email-lic121@chinatelecom.cn
Signed-off-by: Cheng Li <lic121@chinatelecom.cn>
Fixes: 69d177c2fc ("hugetlbfs: handle pages higher order than MAX_ORDER")
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In lru_sort.c and reclaim.c, they are all defining get_monitoring_region()
function, there is no need to define it separately.
As 'get_monitoring_region()' is not a 'static' function anymore, we try to
use a prefix to distinguish with other functions, so there rename it to
'damon_find_biggest_system_ram'.
Link: https://lkml.kernel.org/r/20220909213606.136221-1-sj@kernel.org
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use DEFINE_SEQ_ATTRIBUTE helper macro to simplify the code.
Link: https://lkml.kernel.org/r/20220909083140.3592919-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit ffedd09fa9 ("zsmalloc: Stop using slab fields in struct
page") we are using page->page_type (unsigned int) field instead of
page->units (int) as first object offset in a subpage of zspage. So
get_first_obj_offset() and set_first_obj_offset() functions should work
with unsigned int type.
Link: https://lkml.kernel.org/r/20220909083722.85024-1-avromanov@sberdevices.ru
Fixes: ffedd09fa9 ("zsmalloc: Stop using slab fields in struct page")
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
module_param_call is now completely consistent with module_param_cb, so
there is no need to keep two macros. Convert module_param_call to
module_param_cb since former is obsolete and latter is more kernel-ish.
Link: https://lkml.kernel.org/r/20220909083947.3595610-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Paul Russel <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit b18402726b ("Docs/admin-guide/mm/damon/usage: document DAMON
sysfs interface") announced the DAMON debugfs interface deprecation plan,
but it is not so aggressively announced. As the deprecation time is
coming, this commit makes the announce more easy to be found by adding the
note to the config menu of DAMON debugfs interface.
Link: https://lkml.kernel.org/r/20220909202901.57977-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yun Levi <ppbuk5246@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Preceding commit fixes a bug in 'damon_set_regions()', which allows holes
in the new monitoring target ranges. This commit adds a kunit test case
for the problem to avoid any regression.
Link: https://lkml.kernel.org/r/20220909202901.57977-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yun Levi <ppbuk5246@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When there are two or more non-contiguous regions intersecting with given
new ranges, 'damon_set_regions()' does not fill the holes. This commit
makes the function to fill the holes with newly created regions.
[sj@kernel.org: handle error from 'damon_fill_regions_holes()']
Link: https://lkml.kernel.org/r/20220913215420.57761-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220909202901.57977-3-sj@kernel.org
Fixes: 3f49584b26 ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Yun Levi <ppbuk5246@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
NFSv4 mandates a change attribute to avoid problems with timestamp
granularity, which Linux implements using the i_version counter. This is
particularly important when the underlying filesystem is fast.
Give tmpfs an i_version counter. Since it doesn't have to be persistent,
we can just turn on SB_I_VERSION and sprinkle some inode_inc_iversion
calls in the right places.
Also, while there is no formal spec for xattrs, most implementations
update the ctime on setxattr. Fix shmem_xattr_handler_set to update the
ctime and bump the i_version appropriately.
Link: https://lkml.kernel.org/r/20220909130031.15477-1-jlayton@kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The switch case 'DAMOS_STAT' and switch case 'default' have same return
value in damon_va_apply_scheme(), and the 'default' case is for DAMOS
actions that not supported by 'vaddr'. It might make sense to add a
comment here.
[akpm@linux-foundation.org: fx comment grammar]
Link: https://lkml.kernel.org/r/1662606797-23534-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_new_scheme() has too many parameters, so introduce struct
damos_access_pattern to simplify it.
In additon, we can't use a bpf trace kprobe that has more than 5
parameters.
Link: https://lkml.kernel.org/r/20220908191443.129534-1-sj@kernel.org
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The struct memcg_vmstats and struct memcg_vmstats_percpu contains two
arrays each for events of size NR_VM_EVENT_ITEMS which can be as large as
110. However the memcg v1 only uses 4 of those while memcg v2 uses 15.
The union of both is 17. On a 64 bit system, we are wasting approximately
((110 - 17) * 8 * 2) * (nr_cpus + 1) bytes which is significant on large
machines.
This patch reduces the size of the given structures by adding one
indirection and only stores array of events which are actually used by the
memcg code. With this patch, the size of memcg_vmstats has reduced from
2544 bytes to 1056 bytes while the size of memcg_vmstats_percpu has
reduced from 2568 bytes to 1080 bytes.
[akpm@linux-foundation.org: fix memcg_events_local() array index, per Shakeel]
Link: https://lkml.kernel.org/r/CALvZod70Mvxr+Nzb6k0yiU2RFYjTD=0NFhKK-Eyp+5ejd1PSFw@mail.gmail.com
Link: https://lkml.kernel.org/r/20220907043537.3457014-4-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is a preparatory patch for easing the review of the follow up patch
which will reduce the memory overhead of memory cgroups.
Link: https://lkml.kernel.org/r/20220907043537.3457014-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcg: reduce memory overhead of memory cgroups".
Currently a lot of memory is wasted to maintain the vmevents for memory
cgroups as we have multiple arrays of size NR_VM_EVENT_ITEMS which can be
as large as 110. However memcg code uses small portion of those entries.
This patch series eliminate this overhead by removing the unneeded vmevent
entries from memory cgroup data structures.
This patch (of 3):
This is a preparatory patch to reduce the memory overhead of memory
cgroup. The struct memcg_vmstats is the largest object embedded into the
struct mem_cgroup. This patch extracts struct memcg_vmstats from struct
mem_cgroup to ease the following patches in reducing the size of struct
memcg_vmstats.
Link: https://lkml.kernel.org/r/20220907043537.3457014-1-shakeelb@google.com
Link: https://lkml.kernel.org/r/20220907043537.3457014-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add pageblock_aligned() and use it to simplify code.
Link: https://lkml.kernel.org/r/20220907060844.126891-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add pageblock_align() macro and use it to simplify code.
Link: https://lkml.kernel.org/r/20220907060844.126891-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move pageblock_start_pfn/pageblock_end_pfn() into pageblock-flags.h, then
they could be used somewhere else, not only in compaction, also use
ALIGN_DOWN() instead of round_down() to be pair with ALIGN(), which should
be same for pageblock usage.
Link: https://lkml.kernel.org/r/20220907060844.126891-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove an expensive and unnecessary operation as PCP pages are safely
skipped when reading page owner.PCP pages can be skipped because
PAGE_EXT_OWNER_ALLOCATED is cleared.
With draining PCP pages, these pages are moved to buddy list so they can
be identified as buddy pages and skipped quickly. Although it improved
efficiency of PFN walker, the drain is guaranteed expensive that is
unlikely to be offset by a slight increase in efficiency when skipping
free pages.
PAGE_EXT_OWNER_ALLOCATED is cleared in the page owner reset path below:
free_unref_page
-> free_unref_page_prepare
-> free_pcp_prepare
-> free_pages_prepare which do page owner
reset
-> free_unref_page_commit which add pages into pcp list
Link: https://lkml.kernel.org/r/1662704326-15899-1-git-send-email-quic_zhenhuah@quicinc.com
Link: https://lkml.kernel.org/r/1662633204-10044-1-git-send-email-quic_zhenhuah@quicinc.com
Link: https://lkml.kernel.org/r/1662537673-9392-1-git-send-email-quic_zhenhuah@quicinc.com
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In damon_sysfs_before_terminate(), it needs to check whether ctx->ops.id
supports 'DAMON_OPS_VADDR' or 'DAMON_OPS_FVADDR', there we can use
damon_target_has_pid() instead.
Link: https://lkml.kernel.org/r/20220907084116.62053-1-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We iterate the whole regions list every time to get the first/last regions
intersecting with the specific range in damon_set_regions(), in order to
add new region or resize existing regions to fit in the specific range.
Actually, it is unnecessary to iterate the new added regions and the front
regions that have been checked. Just iterate the regions list from the
current point using list_for_each_entry_from() every time to improve
performance.
The kunit tests passed:
[PASSED] damon_test_apply_three_regions1
[PASSED] damon_test_apply_three_regions2
[PASSED] damon_test_apply_three_regions3
[PASSED] damon_test_apply_three_regions4
Link: https://lkml.kernel.org/r/1662477527-13003-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the report header for invalid- and double-free bugs to contain the
address being freed:
BUG: KASAN: invalid-free in kfree+0x280/0x2a8
Free of addr ffff00000beac001 by task kunit_try_catch/99
Link: https://lkml.kernel.org/r/fce40f8dbd160972fe01a1ff39d0c426c310e4b7.1662852281.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Identify the bug type for the tag-based modes based on the stack trace
entries found in the stack ring.
If a free entry is found first (meaning that it was added last), mark the
bug as use-after-free. If an alloc entry is found first, mark the bug as
slab-out-of-bounds. Otherwise, assign the common bug type.
This change returns the functionalify of the previously dropped
CONFIG_KASAN_TAGS_IDENTIFY.
Link: https://lkml.kernel.org/r/13ce7fa07d9d995caedd1439dfae4d51401842f2.1662411800.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of using a large static array, allocate the stack ring dynamically
via memblock_alloc().
The size of the stack ring is controlled by a new kasan.stack_ring_size
command-line parameter. When kasan.stack_ring_size is not provided, the
default value of 32 << 10 is used.
When the stack trace collection is disabled via kasan.stacktrace=off, the
stack ring is not allocated.
Link: https://lkml.kernel.org/r/03b82ab60db53427e9818e0b0c1971baa10c3cbc.1662411800.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for the kasan.stacktrace command-line argument for Software
Tag-Based KASAN.
The following patch adds a command-line argument for selecting the stack
ring size, and, as the stack ring is supported by both the Software and
the Hardware Tag-Based KASAN modes, it is natural that both of them have
support for kasan.stacktrace too.
Link: https://lkml.kernel.org/r/3b43059103faa7f8796017847b7d674b658f11b5.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement storing stack depot handles for alloc/free stack traces for slab
objects for the tag-based KASAN modes in a ring buffer.
This ring buffer is referred to as the stack ring.
On each alloc/free of a slab object, the tagged address of the object and
the current stack trace are recorded in the stack ring.
On each bug report, if the accessed address belongs to a slab object, the
stack ring is scanned for matching entries. The newest entries are used
to print the alloc/free stack traces in the report: one entry for alloc
and one for free.
The number of entries in the stack ring is fixed in this patch, but one of
the following patches adds a command-line argument to control it.
[andreyknvl@google.com: initialize read-write lock in stack ring]
Link: https://lkml.kernel.org/r/576182d194e27531e8090bad809e4136953895f4.1663700262.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/692de14b6b6a1bc817fd55e4ad92fc1f83c1ab59.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add bug_type and alloc/free_track fields to kasan_report_info and add a
kasan_complete_mode_report_info() function that fills in these fields.
This function is implemented differently for different KASAN mode.
Change the reporting code to use the filled in fields instead of invoking
kasan_get_bug_type() and kasan_get_alloc/free_track().
For the Generic mode, kasan_complete_mode_report_info() invokes these
functions instead. For the tag-based modes, only the bug_type field is
filled in; alloc/free_track are handled in the next patch.
Using a single function that fills in these fields is required for the
tag-based modes, as the values for all three fields are determined in a
single procedure implemented in the following patch.
Link: https://lkml.kernel.org/r/8432b861054fa8d0cee79a8877dedeaf3b677ca8.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass a pointer to kasan_report_info to describe_object() and
describe_object_stacks(), instead of passing the structure's fields.
The untagged pointer and the tag are still passed as separate arguments to
some of the functions to avoid duplicating the untagging logic.
This is preparatory change for the next patch.
Link: https://lkml.kernel.org/r/2e0cdb91524ab528a3c2b12b6d8bcb69512fc4af.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add cache and object fields to kasan_report_info and fill them in in
complete_report_info() instead of fetching them in the middle of the
report printing code.
This allows the reporting code to get access to the object information
before starting printing the report. One of the following patches uses
this information to determine the bug type with the tag-based modes.
Link: https://lkml.kernel.org/r/23264572cb2cbb8f0efbb51509b6757eb3cc1fc9.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce a complete_report_info() function that fills in the
first_bad_addr field of kasan_report_info instead of doing it in
kasan_report_*().
This function will be extended in the next patch.
Link: https://lkml.kernel.org/r/8eb1a9bd01f5d31eab4524da54a101b8720b469e.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To simplify reading the implementation of print_report(), remove the
tagged_addr variable and rename untagged_addr to addr.
Link: https://lkml.kernel.org/r/f64f5f1093b3c06896bf0f850c5d9e661313fcb2.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As kasan_addr_to_page() is only used in report.c, rename it to
addr_to_page() and make it static.
Link: https://lkml.kernel.org/r/66c1267200fe0c16e2ac8847a9315fda041918cb.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of open-coding the validity checks for addr in
kasan_addr_to_page/slab(), use the virt_addr_valid() helper.
Link: https://lkml.kernel.org/r/c22a4850d74d7430f8a6c08216fd55c2860a2b9e.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Do a few non-functional style fixes for the code in report.c.
Link: https://lkml.kernel.org/r/b728eae71f3ea505a885449724de21cf3f476a7b.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the definitions of kasan_get_alloc/free_track() to report_*.c, as
they belong with other the reporting code.
Link: https://lkml.kernel.org/r/0cb15423956889b3905a0174b58782633bbbd72e.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass tagged pointers to kasan_save_alloc/free_info().
This is a preparatory patch to simplify other changes in the series.
Link: https://lkml.kernel.org/r/d5bc48cfcf0dca8269dc3ed863047e4d4d2030f1.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Right now, kasan_cache_create() assigns SLAB_KASAN for all KASAN modes and
then sets up metadata-related cache parameters for the Generic mode.
SLAB_KASAN is used in two places:
1. In slab_ksize() to account for per-object metadata when
calculating the size of the accessible memory within the object.
2. In slab_common.c via kasan_never_merge() to prevent merging of
caches with per-object metadata.
Both cases are only relevant when per-object metadata is present, which is
only the case with the Generic mode.
Thus, assign SLAB_KASAN and define kasan_cache_create() only for the
Generic mode.
Also update the SLAB_KASAN-related comment.
Link: https://lkml.kernel.org/r/61faa2aa1906e2d02c97d00ddf99ce8911dda095.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hide the definitions of kasan_alloc_meta and kasan_free_meta under an
ifdef CONFIG_KASAN_GENERIC check, as these structures are now only used
when the Generic mode is enabled.
Link: https://lkml.kernel.org/r/8d2aabff8c227c444a3f62edf87d5630beb77640.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KASAN prevents merging of slab caches whose objects have per-object
metadata stored in redzones.
As now only the Generic mode uses per-object metadata, define
kasan_never_merge() only for this mode.
Link: https://lkml.kernel.org/r/81ed01f29ff3443580b7e2fe362a8b47b1e8006d.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KASAN provides a helper for calculating the size of per-object metadata
stored in the redzone.
As now only the Generic mode uses per-object metadata, only define
kasan_metadata_size() for this mode.
Link: https://lkml.kernel.org/r/8f81d4938b80446bc72538a08217009f328a3e23.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As kasan_init_cache_meta() is only defined for the Generic mode, it does
not require the CONFIG_KASAN_GENERIC check.
Link: https://lkml.kernel.org/r/211f8f2b213aa91e9148ca63342990b491c4917a.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kasan_init_cache_meta() helper that initializes metadata-related
cache parameters and use this helper in the common KASAN code.
Put the implementation of this new helper into generic.c, as only the
Generic mode uses per-object metadata.
Link: https://lkml.kernel.org/r/a6d7ea01876eb36472c9879f7b23f1b24766276e.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kasan_requires_meta() helper that indicates whether the enabled
KASAN mode requires per-object metadata and use this helper in the common
code.
Also hide kasan_init_object_meta() under CONFIG_KASAN_GENERIC ifdef check,
as Generic is the only mode that uses per-object metadata.
To allow for a potential future change that makes Generic KASAN support
the kasan.stacktrace command-line parameter, let kasan_requires_meta()
return kasan_stack_collection_enabled() instead of simply returning true.
Link: https://lkml.kernel.org/r/cf837e9996246aaaeebf704ccf8ec26a34fcf64f.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the implementations of kasan_get_alloc/free_meta() to generic.c, as
the common KASAN code does not use these functions anymore.
Also drop kasan_reset_tag() from the implementation, as the Generic mode
does not tag pointers.
Link: https://lkml.kernel.org/r/ffcfc0ad654d78a2ef4ca054c943ddb4e5ca477b.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove implementations of the metadata-related functions for the tag-based
modes.
The following patches in the series will provide alternative
implementations.
As of this patch, the tag-based modes no longer collect alloc and free
stack traces. This functionality will be restored later in the series.
Link: https://lkml.kernel.org/r/470fbe5d15e8015092e76e395de354be18ccceab.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kasan_init_object_meta() helper that initializes metadata for a slab
object and use it in the common code.
For now, the implementations of this helper are the same for the Generic
and tag-based modes, but they will diverge later in the series.
This change hides references to alloc_meta from the common code. This is
desired as only the Generic mode will be using per-object metadata after
this series.
Link: https://lkml.kernel.org/r/47c12938fc7f8105e7aaa592527c0e9d3c81fc37.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kasan_get_alloc_track() helper that fetches alloc_track for a slab
object and use this helper in the common reporting code.
For now, the implementations of this helper are the same for the Generic
and tag-based modes, but they will diverge later in the series.
This change hides references to alloc_meta from the common reporting code.
This is desired as only the Generic mode will be using per-object
metadata after this series.
Link: https://lkml.kernel.org/r/0c365a35f4a833fff46f9d42c3212b32f7166556.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kasan_print_aux_stacks() helper that prints the auxiliary stack
traces for the Generic mode.
This change hides references to alloc_meta from the common reporting code.
This is desired as only the Generic mode will be using per-object
metadata after this series.
Link: https://lkml.kernel.org/r/67c7a9ea6615533762b1f8ccc267cd7f9bafb749.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Drop CONFIG_KASAN_TAGS_IDENTIFY and related code to simplify making
changes to the reporting code.
The dropped functionality will be restored in the following patches in
this series.
Link: https://lkml.kernel.org/r/4c66ba98eb237e9ed9312c19d423bbcf4ecf88f8.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Provide standalone implementations of save_alloc_info() for the Generic
and tag-based modes.
For now, the implementations are the same, but they will diverge later in
the series.
Link: https://lkml.kernel.org/r/77f1a078489c1e859aedb5403f772e5e1f7410a0.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move kasan_info.is_kmalloc check out of save_alloc_info().
This is a preparatory change that simplifies the following patches in this
series.
Link: https://lkml.kernel.org/r/df89f1915b788f9a10319905af6d0202a3b30c30.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename set_alloc_info() and kasan_set_free_info() to save_alloc_info() and
kasan_save_free_info(). The new names make more sense.
Link: https://lkml.kernel.org/r/9f04777a15cb9d96bf00331da98e021d732fe1c9.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kasan: switch tag-based modes to stack ring from per-object
metadata", v3.
This series makes the tag-based KASAN modes use a ring buffer for storing
stack depot handles for alloc/free stack traces for slab objects instead
of per-object metadata. This ring buffer is referred to as the stack
ring.
On each alloc/free of a slab object, the tagged address of the object and
the current stack trace are recorded in the stack ring.
On each bug report, if the accessed address belongs to a slab object, the
stack ring is scanned for matching entries. The newest entries are used
to print the alloc/free stack traces in the report: one entry for alloc
and one for free.
The advantages of this approach over storing stack trace handles in
per-object metadata with the tag-based KASAN modes:
- Allows to find relevant stack traces for use-after-free bugs without
using quarantine for freed memory. (Currently, if the object was
reallocated multiple times, the report contains the latest alloc/free
stack traces, not necessarily the ones relevant to the buggy allocation.)
- Allows to better identify and mark use-after-free bugs, effectively
making the CONFIG_KASAN_TAGS_IDENTIFY functionality always-on.
- Has fixed memory overhead.
The disadvantage:
- If the affected object was allocated/freed long before the bug happened
and the stack trace events were purged from the stack ring, the report
will have no stack traces.
Discussion
==========
The proposed implementation of the stack ring uses a single ring buffer
for the whole kernel. This might lead to contention due to atomic
accesses to the ring buffer index on multicore systems.
At this point, it is unknown whether the performance impact from this
contention would be significant compared to the slowdown introduced by
collecting stack traces due to the planned changes to the latter part, see
the section below.
For now, the proposed implementation is deemed to be good enough, but this
might need to be revisited once the stack collection becomes faster.
A considered alternative is to keep a separate ring buffer for each CPU
and then iterate over all of them when printing a bug report. This
approach requires somehow figuring out which of the stack rings has the
freshest stack traces for an object if multiple stack rings have them.
Further plans
=============
This series is a part of an effort to make KASAN stack trace collection
suitable for production. This requires stack trace collection to be fast
and memory-bounded.
The planned steps are:
1. Speed up stack trace collection (potentially, by using SCS;
patches on-hold until steps #2 and #3 are completed).
2. Keep stack trace handles in the stack ring (this series).
3. Add a memory-bounded mode to stack depot or provide an alternative
memory-bounded stack storage.
4. Potentially, implement stack trace collection sampling to minimize
the performance impact.
This patch (of 34):
__kasan_metadata_size() calculates the size of the redzone for objects in
a slab cache.
When accounting for presence of kasan_free_meta in the redzone, this
function only compares free_meta_offset with 0. But free_meta_offset
could also be equal to KASAN_NO_FREE_META, which indicates that
kasan_free_meta is not present at all.
Add a comparison with KASAN_NO_FREE_META into __kasan_metadata_size().
Link: https://lkml.kernel.org/r/cover.1662411799.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/c7b316d30d90e5947eb8280f4dc78856a49298cf.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is unnecessary to get the number of the running kdamond to judge
whether kdamonds are busy. Here we can use the
damon_sysfs_kdamond_running() helper and return -EBUSY directly when
finding a running kdamond. Meanwhile, merging with the judgement that a
kdamond has current sysfs command callback request to make the code more
clear.
Link: https://lkml.kernel.org/r/1662302166-13216-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With all callers now passing in a folio, rename the function and convert
all callers. Removes a couple of calls to compound_head() and a reference
to page->mapping.
Link: https://lkml.kernel.org/r/20220902194653.1739778-55-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Removes a lot of calls to compound_head(). Also remove a VM_BUG_ON that
can never trigger as the PageAnon bit is the bottom bit of page->mapping.
Link: https://lkml.kernel.org/r/20220902194653.1739778-51-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers have now been converted to folio_free_swap() and we can remove
this wrapper.
Link: https://lkml.kernel.org/r/20220902194653.1739778-49-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers now have a folio, so convert the function to take a folio.
Saves a couple of calls to compound_head().
Link: https://lkml.kernel.org/r/20220902194653.1739778-48-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Also convert should_try_to_free_swap() to use a folio. This removes a few
calls to compound_head().
Link: https://lkml.kernel.org/r/20220902194653.1739778-47-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Removes many calls to compound_head(). Does not remove the assumption
that a folio may not be larger than a PMD.
Link: https://lkml.kernel.org/r/20220902194653.1739778-43-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers have now been converted to swap_cache_get_folio(), so we can
remove this wrapper.
Link: https://lkml.kernel.org/r/20220902194653.1739778-39-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Delay fetching the precise page from the folio until we're in unuse_pte().
Saves many calls to compound_head().
Link: https://lkml.kernel.org/r/20220902194653.1739778-37-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With all callers removed, remove this wrapper function. The flags are now
mysteriously called SGP, but I think we can live with that.
Link: https://lkml.kernel.org/r/20220902194653.1739778-34-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shmem_getpage() is being replaced by shmem_get_folio() so use a folio
throughout this function. Saves several calls to compound_head().
Link: https://lkml.kernel.org/r/20220902194653.1739778-33-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shmem_getpage() is being removed, so call its replacement and find the
precise page ourselves.
Link: https://lkml.kernel.org/r/20220902194653.1739778-32-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Symlinks will never use a large folio, but using the folio API removes a
lot of unnecessary folio->page->folio conversions.
Link: https://lkml.kernel.org/r/20220902194653.1739778-31-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While symlinks will always be < PAGE_SIZE, using the folio APIs gets rid
of unnecessary calls to compound_head().
Link: https://lkml.kernel.org/r/20220902194653.1739778-30-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Call shmem_get_folio() and use the folio APIs instead of the page APIs.
Saves several calls to compound_head() and removes assumptions about the
size of a large folio.
Link: https://lkml.kernel.org/r/20220902194653.1739778-29-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With no remaining callers of shmem_getpage_gfp(), add shmem_get_folio()
and reimplement shmem_getpage() as a call to shmem_get_folio().
Link: https://lkml.kernel.org/r/20220902194653.1739778-25-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert shmem_swapin() to return a folio and use swap_cache_get_folio(),
removing all uses of struct page in this function.
Link: https://lkml.kernel.org/r/20220902194653.1739778-21-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert lookup_swap_cache() into swap_cache_get_folio() and add a
lookup_swap_cache() wrapper around it.
[akpm@linux-foundation.org: add CONFIG_SWAP=n stub for swap_cache_get_folio()]
Link: https://lkml.kernel.org/r/20220902194653.1739778-20-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Assert that this is a single-page folio as there are several assumptions
in here that it's exactly PAGE_SIZE bytes large. Saves several calls to
compound_head() and removes the last caller of shmem_alloc_page().
Link: https://lkml.kernel.org/r/20220902194653.1739778-18-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers now have a folio, so pass it in here and remove an unnecessary
call to page_folio().
Link: https://lkml.kernel.org/r/20220902194653.1739778-17-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The 'swapcache' variable is used to track whether the page is from the
swapcache or not. It can do this equally well by being the folio of the
page rather than the page itself, and this saves a number of calls to
compound_head().
Link: https://lkml.kernel.org/r/20220902194653.1739778-16-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With all callers using folios, we can convert add_to_swap_cache() to take
a folio and use it throughout.
Link: https://lkml.kernel.org/r/20220902194653.1739778-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add kernel-doc for folio_free_swap() and make it return bool. Add a
try_to_free_swap() compatibility wrapper.
Link: https://lkml.kernel.org/r/20220902194653.1739778-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By restructuring folio_swapped(), it can use swap_swapcount() instead of
page_swapcount(). It's even a little more efficient.
Link: https://lkml.kernel.org/r/20220902194653.1739778-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce folio_set_swap_entry() to abstract how both folio->private and
swp_entry_t work. Use swap_address_space() directly instead of
indirecting through folio_mapping(). Include an assertion that the old
folio is not large as we only allocate a single-page folio to replace it.
Use folio_put_refs() instead of calling folio_put() twice.
Link: https://lkml.kernel.org/r/20220902194653.1739778-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
