__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon.
Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet
Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead.
Fixes: 376e3fdecb ("m68k: Enable memtest functionality")
Reported-by: Stephen Walsh <vk3heg@vk3heg.net>
Link: https://lists.debian.org/debian-68k/2022/09/msg00007.html
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4f45f05f377bf3f5baf88dbd5c3c8aeac59d94f0.camel@physik.fu-berlin.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/dff216da09ab7a60217c3fc2147e671ae07d636f.1677528627.git.geert@linux-m68k.org
Add secure_computing() call to syscall_trace_enter to actually
filter system calls.
Add necessary arch Kconfig options, define TIF_SECCOMP trace
flag and provide basic seccomp filter support in asm/syscall.h
syscall_get_nr currently uses the syscall nr stored in orig_d0
because we change d0 to a default return code before starting a
syscall trace. This may be inconsistent with syscall_rollback
copying orig_d0 to d0 (which we never check upon return from
trace). We use d0 for the return code from syscall_trace_enter
in entry.S currently, and could perhaps expand that to store
a new syscall number returned by the seccomp filter before
executing the syscall. This clearly needs some discussion.
seccomp_bpf self test on ARAnyM passes 81 out of 94 tests.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-3-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Check return code of syscall_trace_enter(), and skip syscall
if -1. Return code will be left at what had been set by
ptrace or seccomp (in regs->d0).
No regression seen in testing with strace on ARAnyM.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-2-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org
Fixes include:
. use strscpy() instead of strncpy() for cmdline setup
-----BEGIN PGP SIGNATURE-----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=7enN
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Only a single change to use the safer strscpy() instead of strncpy()
when setting up the cmdline"
* tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: use strscpy() to instead of strncpy()
The implementation of strscpy() is more robust and safer.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Don't bother with pointless macros - we are not sharing it with aout coredumps
anymore. Just convert the underlying functions to the same arguments (nobody
uses regs, actually) and call them elf_core_copy_task_fpregs(). And unexport
the entire bunch, while we are at it.
[added missing includes in arch/{csky,m68k,um}/kernel/process.c to avoid extra
warnings about the lack of externs getting added to huge piles for those
files. Pointless, but...]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc. in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing particular
sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
-----BEGIN PGP SIGNATURE-----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=DHiN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
The objects placed at the head of vmlinux need special treatments:
- arch/$(SRCARCH)/Makefile adds them to head-y in order to place
them before other archives in the linker command line.
- arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
obj-y to avoid them going into built-in.a.
This commit gets rid of the latter.
Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.
With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.
There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.
$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].
[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
This is useful on !virt platforms for kexec, so change things from
BI_VIRT_RNG_SEED to be BI_RNG_SEED, and simply remove BI_VIRT_RNG_SEED
because it only ever lasted one release, and nothing is broken by not
having it. At the same time, keep a comment noting that it's been
removed, so that ID isn't reused. In addition, we previously documented
2-byte alignment, but 4-byte alignment is actually necessary, so update
that comment.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: a1ee38ab1a ("m68k: virt: Use RNG seed from bootinfo block")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220927130835.1629806-2-Jason@zx2c4.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The RNG seed boot record is memzeroed after processing, in order to
preserve forward secrecy. By saving the bootinfo for procfs prior to
that, forward secrecy is violated, since it becomes possible to recover
past states. So, save the bootinfo block only after first processing
them.
Fixes: a1ee38ab1a ("m68k: virt: Use RNG seed from bootinfo block")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220927130835.1629806-1-Jason@zx2c4.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
There are several forward declarations for show_registers() in C source
files. Replace these by a single common forward declaration in
<asm/processor.h>, and include <asm/processor.h> where needed.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/r/d5b6a7f9af3e82f0ccb67edac09d9ee45d457932.1657114791.git.geert@linux-m68k.org
ordinary user mode tasks.
In commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
The commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple enough
to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code sitting
in linux-next.
Link: https://lkml.kernel.org/r/87mtfu4up3.fsf@email.froward.int.ebiederm.org
Eric W. Biederman (8):
kthread: Don't allocate kthread_struct for init and umh
fork: Pass struct kernel_clone_args into copy_thread
fork: Explicity test for idle tasks in copy_thread
fork: Generalize PF_IO_WORKER handling
init: Deal with the init process being a user mode process
fork: Explicitly set PF_KTHREAD
fork: Stop allowing kthreads to call execve
sched: Update task_tick_numa to ignore tasks without an mm
arch/alpha/kernel/process.c | 13 ++++++------
arch/arc/kernel/process.c | 13 ++++++------
arch/arm/kernel/process.c | 12 ++++++-----
arch/arm64/kernel/process.c | 12 ++++++-----
arch/csky/kernel/process.c | 15 ++++++-------
arch/h8300/kernel/process.c | 10 ++++-----
arch/hexagon/kernel/process.c | 12 ++++++-----
arch/ia64/kernel/process.c | 15 +++++++------
arch/m68k/kernel/process.c | 12 ++++++-----
arch/microblaze/kernel/process.c | 12 ++++++-----
arch/mips/kernel/process.c | 13 ++++++------
arch/nios2/kernel/process.c | 12 ++++++-----
arch/openrisc/kernel/process.c | 12 ++++++-----
arch/parisc/kernel/process.c | 18 +++++++++-------
arch/powerpc/kernel/process.c | 15 +++++++------
arch/riscv/kernel/process.c | 12 ++++++-----
arch/s390/kernel/process.c | 12 ++++++-----
arch/sh/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_64.c | 12 ++++++-----
arch/um/kernel/process.c | 15 +++++++------
arch/x86/include/asm/fpu/sched.h | 2 +-
arch/x86/include/asm/switch_to.h | 8 +++----
arch/x86/kernel/fpu/core.c | 4 ++--
arch/x86/kernel/process.c | 18 +++++++++-------
arch/xtensa/kernel/process.c | 17 ++++++++-------
fs/exec.c | 8 ++++---
include/linux/sched/task.h | 8 +++++--
init/initramfs.c | 2 ++
init/main.c | 2 +-
kernel/fork.c | 46 +++++++++++++++++++++++++++++++++-------
kernel/sched/fair.c | 2 +-
kernel/umh.c | 6 +++---
33 files changed, 234 insertions(+), 160 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=x6fy
-----END PGP SIGNATURE-----
Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
- Add Tegra234 cpufreq support (Sumit Gupta).
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang).
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois).
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada).
- Add power sequences support to the system reboot and power off
code and make related platform-specific changes for multiple
platforms (Dmitry Osipenko, Geert Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=PAh+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
. correctly set up ZERO_PAGE pointer
. drop ISA_DMA_API support
. fix comment typos
. fixes for undefined symbols
. remove unused code and variables
. elf-fdpic loader support for m68k
-----BEGIN PGP SIGNATURE-----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=O3zh
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A collection of changes to add elf-fdpic loader support for m68k.
Also a collection of various fixes. They include typo corrections,
undefined symbol compilation fixes, removal of the ISA_DMA_API support
and removal of unused code.
Summary:
- correctly set up ZERO_PAGE pointer
- drop ISA_DMA_API support
- fix comment typos
- fixes for undefined symbols
- remove unused code and variables
- elf-fdpic loader support for m68k"
* tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix 68000 CPU link with no platform selected
m68k: removed unused "mach_get_ss"
m68knommu: fix undefined reference to `mach_get_rtc_pll'
m68knommu: fix undefined reference to `_init_sp'
m68knommu: allow elf_fdpic loader to be selected
m68knommu: add definitions to support elf_fdpic program loader
m68knommu: implement minimal regset support
m68knommu: use asm-generic/mmu.h for nommu setups
m68k: fix typos in comments
m68k: coldfire: drop ISA_DMA_API support
m68knommu: set ZERO_PAGE() to the allocated zeroed page
Platform PMU changes:
=====================
- x86/intel:
- Add new Intel Alder Lake and Raptor Lake support
- x86/amd:
- AMD Zen4 IBS extensions support
- Add AMD PerfMonV2 support
- Add AMD Fam19h Branch Sampling support
Generic changes:
================
- signal: Deliver SIGTRAP on perf event asynchronously if blocked
Perf instrumentation can be driven via SIGTRAP, but this causes a problem
when SIGTRAP is blocked by a task & terminate the task.
Allow user-space to request these signals asynchronously (after they get
unblocked) & also give the information to the signal handler when this
happens:
" To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise). "
- Unify/standardize the /sys/devices/cpu/events/* output format.
- Misc fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UqYA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Platform PMU changes:
- x86/intel:
- Add new Intel Alder Lake and Raptor Lake support
- x86/amd:
- AMD Zen4 IBS extensions support
- Add AMD PerfMonV2 support
- Add AMD Fam19h Branch Sampling support
Generic changes:
- signal: Deliver SIGTRAP on perf event asynchronously if blocked
Perf instrumentation can be driven via SIGTRAP, but this causes a
problem when SIGTRAP is blocked by a task & terminate the task.
Allow user-space to request these signals asynchronously (after
they get unblocked) & also give the information to the signal
handler when this happens:
"To give user space the ability to clearly distinguish
synchronous from asynchronous signals, introduce
siginfo_t::si_perf_flags and TRAP_PERF_FLAG_ASYNC (opted for
flags in case more binary information is required in future).
The resolution to the problem is then to (a) no longer force the
signal (avoiding the terminations), but (b) tell user space via
si_perf_flags if the signal was synchronous or not, so that such
signals can be handled differently (e.g. let user space decide
to ignore or consider the data imprecise). "
- Unify/standardize the /sys/devices/cpu/events/* output format.
- Misc fixes & cleanups"
* tag 'perf-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/x86/amd/core: Fix reloading events for SVM
perf/x86/amd: Run AMD BRS code only on supported hw
perf/x86/amd: Fix AMD BRS period adjustment
perf/x86/amd: Remove unused variable 'hwc'
perf/ibs: Fix comment
perf/amd/ibs: Advertise zen4_ibs_extensions as pmu capability attribute
perf/amd/ibs: Add support for L3 miss filtering
perf/amd/ibs: Use ->is_visible callback for dynamic attributes
perf/amd/ibs: Cascade pmu init functions' return value
perf/x86/uncore: Add new Alder Lake and Raptor Lake support
perf/x86/uncore: Clean up uncore_pci_ids[]
perf/x86/cstate: Add new Alder Lake and Raptor Lake support
perf/x86/msr: Add new Alder Lake and Raptor Lake support
perf/x86: Add new Alder Lake and Raptor Lake support
perf/amd/ibs: Use interrupt regs ip for stack unwinding
perf/x86/amd/core: Add PerfMonV2 overflow handling
perf/x86/amd/core: Add PerfMonV2 counter control
perf/x86/amd/core: Detect available counters
perf/x86/amd/core: Detect PerfMonV2 support
x86/msr: Add PerfCntrGlobal* registers
...
The m68k machine helper function "mach_get_ss" function pointer is
set for some machines, but ultimately never used anywhere. Remove it.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Configuring for a nommu classic m68k target and enabling the generic rtc
driver (CONFIG_RTC_DRV_GENERIC) will result in the following compile
error:
m68k-linux-ld: arch/m68k/kernel/time.o: in function `rtc_ioctl':
time.c:(.text+0x82): undefined reference to `mach_get_rtc_pll'
m68k-linux-ld: time.c:(.text+0xbc): undefined reference to `mach_set_rtc_pll'
m68k-linux-ld: time.c:(.text+0xf4): undefined reference to `mach_set_rtc_pll'
There are no definitions of "mach_set_rtc_pll" and "mach_get_rtc_pll" in the
nommu code paths. Move these definitions and the associated "mach_hwclk",
so that they are around their use case in time.c. This means they will
always be defined on the builds that require them, and not on those that
cannot use them - such as ColdFire (both with and without MMU enabled).
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Kernel now supports chained power-off handlers. Use
register_power_off_handler() that registers power-off handlers and
do_kernel_power_off() that invokes chained power-off handlers. Legacy
pm_power_off() will be removed once all drivers will be converted to
the new sys-off API.
Normally arch code should adopt only the do_kernel_power_off() at first,
but m68k is a special case because it uses pm_power_off() "inside out",
i.e. pm_power_off() invokes machine_power_off() [in fact it does nothing],
while it's machine_power_off() that should invoke the pm_power_off(), and
thus, we can't convert platforms to the new API separately. There are only
two platforms changed here, so it's not a big deal.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add code support to the m68k architecture for regsets.
Currently the only thing that will need to use regsets for m68k will be
coredump support of the elf_fdpic loader. So the changes are conditional
on that. The added support is the minimum definitions required to support
just that.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
m68k (other than Coldfire) uses syscall_trace for both trace entry
and trace exit. Seccomp support requires separate entry points for
trace entry and exit which are already provided for Coldfire.
Replace syscall_trace by syscall_trace_enter and syscall_trace_leave
in preparation for seccomp support.
No regression seen in testing with strace on ARAnyM.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20220127074158.25888-2-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.
The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.
Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.
v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
With SIGTRAP on perf events, we have encountered termination of
processes due to user space attempting to block delivery of SIGTRAP.
Consider this case:
<set up SIGTRAP on a perf event>
...
sigset_t s;
sigemptyset(&s);
sigaddset(&s, SIGTRAP | <and others>);
sigprocmask(SIG_BLOCK, &s, ...);
...
<perf event triggers>
When the perf event triggers, while SIGTRAP is blocked, force_sig_perf()
will force the signal, but revert back to the default handler, thus
terminating the task.
This makes sense for error conditions, but not so much for explicitly
requested monitoring. However, the expectation is still that signals
generated by perf events are synchronous, which will no longer be the
case if the signal is blocked and delivered later.
To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise).
The alternative of making the kernel ignore SIGTRAP on perf events if
the signal is blocked may work for some usecases, but likely causes
issues in others that then have to revert back to interception of
sigprocmask() (which we want to avoid). [ A concrete example: when using
breakpoint perf events to track data-flow, in a region of code where
signals are blocked, data-flow can no longer be tracked accurately.
When a relevant asynchronous signal is received after unblocking the
signal, the data-flow tracking logic needs to know its state is
imprecise. ]
Fixes: 97ba62b278 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220404111204.935357-1-elver@google.com
This machine allows to have up to 3.2 GiB and 128 Virtio devices.
It is based on android goldfish devices.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/r/20220406201523.243733-5-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
$(shell ...) expands to empty. There is no need to assign it to _dummy.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was
around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
making the semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where now anything left in tracehook.h is
some weird strange thing that is difficult to understand.
Eric W. Biederman (15):
ptrace: Move ptrace_report_syscall into ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Remove tracehook_signal_handler
task_work: Remove unnecessary include from posix_timers.h
task_work: Introduce task_work_pending
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
resume_user_mode: Move to resume_user_mode.h
tracehook: Remove tracehook.h
ptrace: Move setting/clearing ptrace_message into ptrace_stop
ptrace: Return the signal to continue with from ptrace_stop
Jann Horn (1):
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Yang Li (1):
ptrace: Remove duplicated include in ptrace.c
MAINTAINERS | 1 -
arch/Kconfig | 5 +-
arch/alpha/kernel/ptrace.c | 5 +-
arch/alpha/kernel/signal.c | 4 +-
arch/arc/kernel/ptrace.c | 5 +-
arch/arc/kernel/signal.c | 4 +-
arch/arm/kernel/ptrace.c | 12 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm64/kernel/ptrace.c | 14 +--
arch/arm64/kernel/signal.c | 4 +-
arch/csky/kernel/ptrace.c | 5 +-
arch/csky/kernel/signal.c | 4 +-
arch/h8300/kernel/ptrace.c | 5 +-
arch/h8300/kernel/signal.c | 4 +-
arch/hexagon/kernel/process.c | 4 +-
arch/hexagon/kernel/signal.c | 1 -
arch/hexagon/kernel/traps.c | 6 +-
arch/ia64/kernel/process.c | 4 +-
arch/ia64/kernel/ptrace.c | 6 +-
arch/ia64/kernel/signal.c | 1 -
arch/m68k/kernel/ptrace.c | 5 +-
arch/m68k/kernel/signal.c | 4 +-
arch/microblaze/kernel/ptrace.c | 5 +-
arch/microblaze/kernel/signal.c | 4 +-
arch/mips/kernel/ptrace.c | 5 +-
arch/mips/kernel/signal.c | 4 +-
arch/nds32/include/asm/syscall.h | 2 +-
arch/nds32/kernel/ptrace.c | 5 +-
arch/nds32/kernel/signal.c | 4 +-
arch/nios2/kernel/ptrace.c | 5 +-
arch/nios2/kernel/signal.c | 4 +-
arch/openrisc/kernel/ptrace.c | 5 +-
arch/openrisc/kernel/signal.c | 4 +-
arch/parisc/kernel/ptrace.c | 7 +-
arch/parisc/kernel/signal.c | 4 +-
arch/powerpc/kernel/ptrace/ptrace.c | 8 +-
arch/powerpc/kernel/signal.c | 4 +-
arch/riscv/kernel/ptrace.c | 5 +-
arch/riscv/kernel/signal.c | 4 +-
arch/s390/include/asm/entry-common.h | 1 -
arch/s390/kernel/ptrace.c | 1 -
arch/s390/kernel/signal.c | 5 +-
arch/sh/kernel/ptrace_32.c | 5 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sparc/kernel/ptrace_32.c | 5 +-
arch/sparc/kernel/ptrace_64.c | 5 +-
arch/sparc/kernel/signal32.c | 1 -
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 4 +-
arch/um/kernel/process.c | 4 +-
arch/um/kernel/ptrace.c | 5 +-
arch/x86/kernel/ptrace.c | 1 -
arch/x86/kernel/signal.c | 5 +-
arch/x86/mm/tlb.c | 1 +
arch/xtensa/kernel/ptrace.c | 5 +-
arch/xtensa/kernel/signal.c | 4 +-
block/blk-cgroup.c | 2 +-
fs/coredump.c | 1 -
fs/exec.c | 1 -
fs/io-wq.c | 6 +-
fs/io_uring.c | 11 +-
fs/proc/array.c | 1 -
fs/proc/base.c | 1 -
include/asm-generic/syscall.h | 2 +-
include/linux/entry-common.h | 47 +-------
include/linux/entry-kvm.h | 2 +-
include/linux/posix-timers.h | 1 -
include/linux/ptrace.h | 81 ++++++++++++-
include/linux/resume_user_mode.h | 64 ++++++++++
include/linux/sched/signal.h | 17 +++
include/linux/task_work.h | 5 +
include/linux/tracehook.h | 226 -----------------------------------
include/uapi/linux/ptrace.h | 2 +-
kernel/entry/common.c | 19 +--
kernel/entry/kvm.c | 9 +-
kernel/exit.c | 3 +-
kernel/livepatch/transition.c | 1 -
kernel/ptrace.c | 47 +++++---
kernel/seccomp.c | 1 -
kernel/signal.c | 62 +++++-----
kernel/task_work.c | 4 +-
kernel/time/posix-cpu-timers.c | 1 +
mm/memcontrol.c | 2 +-
security/apparmor/domain.c | 1 -
security/selinux/hooks.c | 1 -
85 files changed, 372 insertions(+), 495 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=uEro
-----END PGP SIGNATURE-----
Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
Fix following includecheck warning:
./arch/m68k/kernel/ptrace.c: linux/ptrace.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Fixes: 153474ba1a ("ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h")
Link: https://lkml.kernel.org/r/20220315235148.54253-1-yang.lee@linux.alibaba.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.
Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.
Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h
There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
To avoid 'warning: no previous prototype for' errors, declare all the
parse_bootinfo and config function prototypes into asm/config.h and
include it in arch/m68k/kernel/setup_mm.c and arch/m68k/*/config.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/r/20220121200738.2577697-2-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
The generic function ptrace_report_syscall does a little more
than syscall_trace on m68k. The function ptrace_report_syscall
stops early if PT_TRACED is not set, it sets ptrace_message,
and returns the result of fatal_signal_pending.
Setting ptrace_message to a passed in value of 0 is effectively not
setting ptrace_message, making that additional work a noop.
Returning the result of fatal_signal_pending and letting the caller
ignore the result becomes a noop in this change.
When a process is ptraced, the flag PT_PTRACED is always set in
current->ptrace. Testing for PT_PTRACED in ptrace_report_syscall is
just an optimization to fail early if the process is not ptraced.
Later on in ptrace_notify, ptrace_stop will test current->ptrace under
tasklist_lock and skip performing any work if the task is not ptraced.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lkml.kernel.org/r/20220103213312.9144-8-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Enable the memtest functionality and rearrange some code to prevent it
from clobbering the initrd.
The code to implement CONFIG_BLK_DEV_INITRD was conditional on
!defined(CONFIG_SUN3). For simplicity, remove that test on the basis
that m68k_ramdisk.size == 0 on Sun 3. The SLIME source code at
http://sammy.net/sun3/ftp/pub/m68k/sun3/slime/slime-2.0.tar.gz
indicates that no BI_RAMDISK entry is ever passed to the kernel due
to #ifdef 0 around the relevant code.
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/8170fe1d1c62426d82275d36ba409ecc18754292.1637274578.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
André Almeida sends an update for the newly added futex_waitv
syscall that was initially only added to a few architectures.
Some additional ones have since made it through architecture
maintainer trees, this finishes the remaining ones.
-----BEGIN PGP SIGNATURE-----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=Vy2A
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic syscall table update from Arnd Bergmann:
"André Almeida sends an update for the newly added futex_waitv syscall
that was initially only added to a few architectures.
Some additional ones have since made it through architecture
maintainer trees, this finishes the remaining ones"
* tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
futex: Wireup futex_waitv syscall
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29c ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c02 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad7 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf07 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f8 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d5 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634 ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf1 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
