Some of the tag_8021q code has been taken out of sja1105, which uses
"rc" for its return code variables, whereas the DSA core uses "err".
Change tag_8021q for consistency.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simply put, the best-effort VLAN filtering mode relied on VLAN retagging
from a bridge VLAN towards a tag_8021q sub-VLAN in order to be able to
decode the source port in the tagger, but the VLAN retagging
implementation inside the sja1105 chips is not the best and we were
relying on marginal operating conditions.
The most notable limitation of the best-effort VLAN filtering mode is
its incapacity to treat this case properly:
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp4 master br0
bridge vlan del dev swp4 vid 1
bridge vlan add dev swp4 vid 1 pvid
When sending an untagged packet through swp2, the expectation is for it
to be forwarded to swp4 as egress-tagged (so it will contain VLAN ID 1
on egress). But the switch will send it as egress-untagged.
There was an attempt to fix this here:
https://patchwork.kernel.org/project/netdevbpf/patch/20210407201452.1703261-2-olteanv@gmail.com/
but it failed miserably because it broke PTP RX timestamping, in a way
that cannot be corrected due to hardware issues related to VLAN
retagging.
So with either PTP broken or pushing VLAN headers on egress for untagged
packets being broken, the sad reality is that the best-effort VLAN
filtering code is broken. Delete it.
Note that this means there will be a temporary loss of functionality in
this driver until it is replaced with something better (network stack
RX/TX capability for "mode 2" as described in
Documentation/networking/dsa/sja1105.rst, the "port under VLAN-aware
bridge" case). We simply cannot keep this code until that driver rework
is done, it is super bloated and tangled with tag_8021q.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
s390/qeth: updates 2021-07-20
please apply the following patch series for qeth to netdev's net-next tree.
This removes the deprecated support for OSN-mode devices, and does some
follow-on cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni says:
====================
veth: more flexible channels number configuration
XDP setups can benefit from multiple veth RX/TX queues. Currently
veth allow setting such number only at creation time via the
'numrxqueues' and 'numtxqueues' parameters.
This series introduces support for the ethtool set_channel operation
and allows configuring the queue number via a new module parameter.
The veth default configuration is not changed.
Finally self-tests are updated to check the new features, with both
valid and invalid arguments.
This iteration is a rebase of the most recent RFC, it does not provide
a module parameter to configure the default number of queues, but I
think could be worthy
RFC v1 -> RFC v2:
- report more consistent 'combined' count
- make set_channel as resilient as possible to errors
- drop module parameter - but I would still consider it.
- more self-tests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov says:
====================
net: bridge: multicast: add vlan support
This patchset adds initial per-vlan multicast support, most of the code
deals with moving to multicast context pointers from bridge/port pointers.
That allows us to switch them with the per-vlan contexts when a multicast
packet is being processed and vlan multicast snooping has been enabled.
That is controlled by a global bridge option added in patch 06 which is
off by default (BR_BOOLOPT_MCAST_VLAN_SNOOPING). It is important to note
that this option can change only under RTNL and doesn't require
multicast_lock, so we need to be careful when retrieving mcast contexts
in parallel. For packet processing they are switched only once in
br_multicast_rcv() and then used until the packet has been processed.
For the most part we need these contexts only to read config values and
check if they are disabled. The global mcast state which is maintained
consists of querier and router timers, the rest are config options.
The port mcast state which is maintained consists of query timer and
link to router port list if it's ever marked as a router port. Port
multicast contexts _must_ be used only with their respective global
contexts, that is a bridge port's mcast context must be used only with
bridge's global mcast context and a vlan/port's mcast context must be
used only with that vlan's global mcast context due to the router port
lists. This way a bridge port can be marked as a router in multiple
vlans, but might not be a router in some other vlan. Also this allows us
to have per-vlan querier elections, per-vlan queries and basically the
whole multicast state becomes per-vlan when the option is enabled.
One of the hardest parts is synchronization with vlan's memory
management, that is done through a new vlan flag: BR_VLFLAG_MCAST_ENABLED
which is changed only under multicast_lock. When a vlan is being
destroyed first that flag is removed under the lock, then the multicast
context is torn down which includes waiting for any outstanding context
timers. Since all of the vlan processing depends on BR_VLFLAG_MCAST_ENABLED
it must be checked first if the contexts are vlan and the multicast_lock
has been acquired. That is done by all IGMP/MLD packet processing
functions and timers. When processing a packet we have RCU so the vlan
memory won't be freed, but if the flag is missing we must not process it.
The timers are synchronized in the same way with the addition of waiting
for them to finish in case they are running after removing the flag
under multicast_lock (i.e. they were waiting for the lock). Multicast vlan
snooping requires vlan filtering to be enabled, if it's disabled then
snooping gets automatically disabled, too. BR_VLFLAG_GLOBAL_MCAST_ENABLED
controls if a vlan has BR_VLFLAG_MCAST_ENABLED set which is used in all
vlan disabled checks. We need both flags because one is controlled by
user-space globally (BR_VLFLAG_GLOBAL_MCAST_ENABLED) and the other is
for a particular bridge/vlan or port/vlan entry (BR_VLFLAG_MCAST_ENABLED).
Since the latter is also used for synchronization between the multicast
and vlan code, and also controlled by BR_VLFLAG_GLOBAL_MCAST_ENABLED we
rely on it when checking if a vlan context is disabled. The multicast
fast-path has 3 new bit tests on the cache-hot bridge flags field, I
didn't observe any measurable difference. I haven't forced either
context options to be always disabled when the other type is enabled
because the state consists of timers which either expire (router) or
don't affect the normal operation. Some options, like the mcast querier
one, won't be allowed to change for the disabled context type, that will
come with a future patch-set which adds per-vlan querier control.
Another important addition is the global vlan options, so far we had
only per bridge/port vlan options but in order to control vlan multicast
snooping globally we need to add a new type of global vlan options.
They can be changed only on the bridge device and are dumped only when a
special flag is set in the dump request. The first global option is vlan
mcast snooping control, it controls the vlan BR_VLFLAG_GLOBAL_MCAST_ENABLED
private flag. It can be set only on master vlan entries. There will be
many more global vlan options in the future both for multicast config
and other per-vlan options (e.g. STP).
There's a lot of room for improvements, I'll do some of the initial
ones but splitting the state to different contexts opens the door
for a lot more. Also any new multicast options become vlan-supported with
very little to no effort by using the same contexts.
Short patch description:
patches 01-04: initial mcast context add, no functional changes
patch 05: adds vlan mcast init and control helpers and uses them on
vlan create/destroy
patch 06: adds a global bridge mcast vlan snooping knob (default
off)
patches 07-08: add a helper for users which must derive the contexts
based on current bridge and vlan options (e.g. timers)
patch 09: adds checks for disabled vlan contexts in packet
processing and timers
patch 10: adds support for per-vlan querier and tagged queries
patch 11: adds router port vlan id in the notifications
patches 12-14: add global vlan options support (change, dump, notify)
patch 15: adds per-vlan global mcast snooping control
Future patch-sets which build on this one (in order):
- vlan state mcast handling
- user-space mdb contexts (currently only the bridge contexts are used
there)
- all bridge multicast config options added per-vlan global and per
vlan/port
- iproute2 support for all the new uAPIs
- selftests
This set has been stress-tested (deleting/adding ports/vlans while changing
vlan mcast snooping while processing IGMP/MLD packets), and also has
passed all bridge self-tests. I'm sending this set as early as possible
since there're a few more related sets that should go in the same
release to get proper and full mcast vlan snooping support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth uses three device_type structs - a generic one, and one for each
sub-driver (which is used for fixed-layer devices only). Instead of
exporting these device_types back&forth between the driver's modules,
make all the logic self-contained within the sub-drivers.
On disc->setup() they either install their own device_type, or add the
sysfs attributes that are missing in the generic device_type. Later on
disc->remove() these attributes are removed again from any device that
has the generic device_type.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QETH_PROT_* naming is shared among two unrelated areas - one is
the MPC-level protocol identifiers, the other is the qeth_prot_version
enum.
Rename the MPC definitions to use QETH_MPC_PROT_*.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fb64de1bc3 ("s390/qeth: phase out OSN support") spelled out
why the OSN support in qeth is in a bad shape, and put any remaining
interested parties on notice to speak up before it gets ripped out.
It's 2021 now, so make true on that promise and remove all the
OSN-specific parts from qeth. This also means that we no longer need to
export various parts of the cmd & data path internals to the L2 driver.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2021-07-19
This series contains updates to iavf and i40e drivers.
Stefan Assmann adds locking to a path that does not acquire a spinlock
where needed for i40e. He also adjusts locking of critical sections to
help avoid races and removes overriding of the adapter state during
pending reset for iavf driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni says:
====================
veth: more flexible channels number configuration
XDP setups can benefit from multiple veth RX/TX queues. Currently
veth allow setting such number only at creation time via the
'numrxqueues' and 'numtxqueues' parameters.
This series introduces support for the ethtool set_channel operation
and allows configuring the queue number via a new module parameter.
The veth default configuration is not changed.
Finally self-tests are updated to check the new features, with both
valid and invalid arguments.
This iteration is a rebase of the most recent RFC, it does not provide
a module parameter to configure the default number of queues, but I
think could be worthy
RFC v1 -> RFC v2:
- report more consistent 'combined' count
- make set_channel as resilient as possible to errors
- drop module parameter - but I would still consider it.
- more self-tests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple functional test for the newly exposed features.
Also add an optional stress test for the channel number
update under flood.
RFC v1 -> RFC v2:
- add the stress test
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows easier XDP usage. The number of default active
queues is not changed: 1 RX and 1 TX so that this does
not introduce overhead on the datapath for queue selection.
v1 -> v2:
- drop the module parameter, force default to nr_possible_cpus - Toke
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change implements the set_channel() ethtool operation,
preserving the current defaults values and allowing up set
the number of queues in the range set ad device creation
time.
The update operation tries hard to leave the device in a
consistent status in case of errors.
RFC v1 -> RFC v2:
- don't flip device status on set_channel()
- roll-back the changes if possible on error - Jackub
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract in simpler helpers the code to enable and disable a
range of xdp/napi instance, with the common property that
"disable" helpers can't fail.
Will be used by the next patch. No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
veth get_channel currently reports for channels being both RX/TX and
combined. As Jakub noted:
"""
ethtool man page is relatively clear, unfortunately the kernel code
is not and few read the man page. A channel is approximately an IRQ,
not a queue, and IRQ can't be dedicated and combined simultaneously
"""
This patch changes the information exposed by veth_get_channels,
setting max_combined to zero, being more consistent with the above
statement. The ethtool_channels is always cleared by the caller, we just
need to avoid setting the 'combined' fields.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
unix sockets allows to send file descriptors via SCM_RIGHTS type messages.
Each such send call forces kernel to allocate up to 2Kb memory for
struct scm_fp_list.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Author: Andrey Ryabinin <aryabinin@virtuozzo.com>
The size of the ip_tunnel_prl structs allocation is controllable from
user-space, thus it's better to avoid spam in dmesg if allocation failed.
Also add __GFP_ACCOUNT as this is a good candidate for per-memcg
accounting. Allocation is temporary and limited by 4GB.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vlan array consume up to 8 pages of memory per net device.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net namespace can create up to 64K tcp and dccp ports and force kernel
to allocate up to several megabytes of memory per netns
for inet_bind_bucket objects.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An netadmin inside container can use 'ip a a' and 'ip r a'
to assign a large number of ipv4/ipv6 addresses and routing entries
and force kernel to allocate megabytes of unaccounted memory
for long-lived per-netdevice related kernel objects:
'struct in_ifaddr', 'struct inet6_ifaddr', 'struct fib6_node',
'struct rt6_info', 'struct fib_rules' and ip_fib caches.
These objects can be manually removed, though usually they lives
in memory till destroy of its net namespace.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
One of such objects is the 'struct fib6_node' mostly allocated in
net/ipv6/route.c::__ip6_ins_rt() inside the lock_bh()/unlock_bh() section:
write_lock_bh(&table->tb6_lock);
err = fib6_add(&table->tb6_root, rt, info, mxc);
write_unlock_bh(&table->tb6_lock);
In this case it is not enough to simply add SLAB_ACCOUNT to corresponding
kmem cache. The proper memory cgroup still cannot be found due to the
incorrect 'in_interrupt()' check used in memcg_kmem_bypass().
Obsoleted in_interrupt() does not describe real execution context properly.
>From include/linux/preempt.h:
The following macros are deprecated and should not be used in new code:
in_interrupt() - We're in NMI,IRQ,SoftIRQ context or have BH disabled
To verify the current execution context new macro should be used instead:
in_task() - We're in task context
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Container netadmin can create a lot of fake net devices,
then create a new net namespace and repeat it again and again.
Net device can request the creation of up to 4096 tx and rx queues,
and force kernel to allocate up to several tens of megabytes memory
per net device.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov says:
====================
net: bridge: multicast: add vlan support
This patchset adds initial per-vlan multicast support, most of the code
deals with moving to multicast context pointers from bridge/port pointers.
That allows us to switch them with the per-vlan contexts when a multicast
packet is being processed and vlan multicast snooping has been enabled.
That is controlled by a global bridge option added in patch 06 which is
off by default (BR_BOOLOPT_MCAST_VLAN_SNOOPING). It is important to note
that this option can change only under RTNL and doesn't require
multicast_lock, so we need to be careful when retrieving mcast contexts
in parallel. For packet processing they are switched only once in
br_multicast_rcv() and then used until the packet has been processed.
For the most part we need these contexts only to read config values and
check if they are disabled. The global mcast state which is maintained
consists of querier and router timers, the rest are config options.
The port mcast state which is maintained consists of query timer and
link to router port list if it's ever marked as a router port. Port
multicast contexts _must_ be used only with their respective global
contexts, that is a bridge port's mcast context must be used only with
bridge's global mcast context and a vlan/port's mcast context must be
used only with that vlan's global mcast context due to the router port
lists. This way a bridge port can be marked as a router in multiple
vlans, but might not be a router in some other vlan. Also this allows us
to have per-vlan querier elections, per-vlan queries and basically the
whole multicast state becomes per-vlan when the option is enabled.
One of the hardest parts is synchronization with vlan's memory
management, that is done through a new vlan flag: BR_VLFLAG_MCAST_ENABLED
which is changed only under multicast_lock. When a vlan is being
destroyed first that flag is removed under the lock, then the multicast
context is torn down which includes waiting for any outstanding context
timers. Since all of the vlan processing depends on BR_VLFLAG_MCAST_ENABLED
it must be checked first if the contexts are vlan and the multicast_lock
has been acquired. That is done by all IGMP/MLD packet processing
functions and timers. When processing a packet we have RCU so the vlan
memory won't be freed, but if the flag is missing we must not process it.
The timers are synchronized in the same way with the addition of waiting
for them to finish in case they are running after removing the flag
under multicast_lock (i.e. they were waiting for the lock). Multicast vlan
snooping requires vlan filtering to be enabled, if it's disabled then
snooping gets automatically disabled, too. BR_VLFLAG_GLOBAL_MCAST_ENABLED
controls if a vlan has BR_VLFLAG_MCAST_ENABLED set which is used in all
vlan disabled checks. We need both flags because one is controlled by
user-space globally (BR_VLFLAG_GLOBAL_MCAST_ENABLED) and the other is
for a particular bridge/vlan or port/vlan entry (BR_VLFLAG_MCAST_ENABLED).
Since the latter is also used for synchronization between the multicast
and vlan code, and also controlled by BR_VLFLAG_GLOBAL_MCAST_ENABLED we
rely on it when checking if a vlan context is disabled. The multicast
fast-path has 3 new bit tests on the cache-hot bridge flags field, I
didn't observe any measurable difference. I haven't forced either
context options to be always disabled when the other type is enabled
because the state consists of timers which either expire (router) or
don't affect the normal operation. Some options, like the mcast querier
one, won't be allowed to change for the disabled context type, that will
come with a future patch-set which adds per-vlan querier control.
Another important addition is the global vlan options, so far we had
only per bridge/port vlan options but in order to control vlan multicast
snooping globally we need to add a new type of global vlan options.
They can be changed only on the bridge device and are dumped only when a
special flag is set in the dump request. The first global option is vlan
mcast snooping control, it controls the vlan BR_VLFLAG_GLOBAL_MCAST_ENABLED
private flag. It can be set only on master vlan entries. There will be
many more global vlan options in the future both for multicast config
and other per-vlan options (e.g. STP).
There's a lot of room for improvements, I'll do some of the initial
ones but splitting the state to different contexts opens the door
for a lot more. Also any new multicast options become vlan-supported with
very little to no effort by using the same contexts.
Short patch description:
patches 01-04: initial mcast context add, no functional changes
patch 05: adds vlan mcast init and control helpers and uses them on
vlan create/destroy
patch 06: adds a global bridge mcast vlan snooping knob (default
off)
patches 07-08: add a helper for users which must derive the contexts
based on current bridge and vlan options (e.g. timers)
patch 09: adds checks for disabled vlan contexts in packet
processing and timers
patch 10: adds support for per-vlan querier and tagged queries
patch 11: adds router port vlan id in the notifications
patches 12-14: add global vlan options support (change, dump, notify)
patch 15: adds per-vlan global mcast snooping control
Future patch-sets which build on this one (in order):
- vlan state mcast handling
- user-space mdb contexts (currently only the bridge contexts are used
there)
- all bridge multicast config options added per-vlan global and per
vlan/port
- iproute2 support for all the new uAPIs
- selftests
This set has been stress-tested (deleting/adding ports/vlans while changing
vlan mcast snooping while processing IGMP/MLD packets), and also has
passed all bridge self-tests. I'm sending this set as early as possible
since there're a few more related sets that should go in the same
release to get proper and full mcast vlan snooping support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new global vlan option which controls whether multicast snooping
is enabled or disabled for a single vlan. It controls the vlan private
flag: BR_VLFLAG_GLOBAL_MCAST_ENABLED.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for global options notifications. They use only RTM_NEWVLAN
since global options can only be set and are contained in a separate
vlan global options attribute. Notifications are compressed in ranges
where possible, i.e. the sequential vlan options are equal.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new vlan options dump flag which causes only global vlan options
to be dumped. The dumps are done only with bridge devices, ports are
ignored. They support vlan compression if the options in sequential
vlans are equal (currently always true).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can have two types of vlan options depending on context:
- per-device vlan options (split in per-bridge and per-port)
- global vlan options
The second type wasn't supported in the bridge until now, but we need
them for per-vlan multicast support, per-vlan STP support and other
options which require global vlan context. They are contained in the global
bridge vlan context even if the vlan is not configured on the bridge device
itself. This patch adds initial netlink attributes and support for setting
these global vlan options, they can only be set (RTM_NEWVLAN) and the
operation must use the bridge device. Since there are no such options yet
it shouldn't have any functional effect.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the port multicast context to check if the router port is a vlan and
in case it is include its vlan id in the notification.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic vlan context querier support, if the contexts passed to
multicast_alloc_query are vlan then the query will be tagged. Also
handle querier start/stop of vlan contexts.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add helpers which check if the current bridge/port multicast context
should be used (i.e. they're not disabled) and use them for Rx IGMP/MLD
processing, timers and new group addition. It is important for vlans to
disable processing of timer/packet after the multicast_lock is obtained
if the vlan context doesn't have BR_VLFLAG_MCAST_ENABLED. There are two
cases when that flag is missing:
- if the vlan is getting destroyed it will be removed and timers will
be stopped
- if the vlan mcast snooping is being disabled
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to use the new port group to port context helper in places where
we cannot pass down the proper context (i.e. functions that can be
called by timers or outside the packet snooping paths).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add br_multicast_pg_to_port_ctx() which returns the proper port multicast
context from either port or vlan based on bridge option and vlan flags.
As the comment inside explains the locking is a bit tricky, we rely on
the fact that BR_VLFLAG_MCAST_ENABLED requires multicast_lock to change
and we also require it to be held to call that helper. If we find the
vlan under rcu and it still has the flag then we can be sure it will be
alive until we unlock multicast_lock which should be enough.
Note that the context might change from vlan to bridge between different
calls to this helper as the mcast vlan knob requires only rtnl so it should
be used carefully and for read-only/check purposes.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a global knob that controls if vlan multicast snooping is enabled.
The proper contexts (vlan or bridge-wide) will be chosen based on the knob
when processing packets and changing bridge device state. Note that
vlans have their individual mcast snooping enabled by default, but this
knob is needed to turn on bridge vlan snooping. It is disabled by
default. To enable the knob vlan filtering must also be enabled, it
doesn't make sense to have vlan mcast snooping without vlan filtering
since that would lead to inconsistencies. Disabling vlan filtering will
also automatically disable vlan mcast snooping.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add helpers to enable/disable vlan multicast based on its flags, we need
two flags because we need to know if the vlan has multicast enabled
globally (user-controlled) and if it has it enabled on the specific device
(bridge or port). The new private vlan flags are:
- BR_VLFLAG_MCAST_ENABLED: locally enabled multicast on the device, used
when removing a vlan, toggling vlan mcast snooping and controlling
single vlan (kernel-controlled, valid under RTNL and multicast_lock)
- BR_VLFLAG_GLOBAL_MCAST_ENABLED: globally enabled multicast for the
vlan, used to control the bridge-wide vlan mcast snooping for a
single vlan (user-controlled, can be checked under any context)
Bridge vlan contexts are created with multicast snooping enabled by
default to be in line with the current bridge snooping defaults. In
order to actually activate per vlan snooping and context usage a
bridge-wide knob will be added later which will default to disabled.
If that knob is enabled then automatically all vlan snooping will be
enabled. All vlan contexts are initialized with the current bridge
multicast context defaults.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add global and per-port vlan multicast context, only initialized but
still not used. No functional changes intended.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass multicast context pointers to multicast functions instead of bridge/port.
This would make it easier later to switch these contexts to their per-vlan
versions. The patch is basically search and replace, no functional changes.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out the bridge's global multicast context into a separate
structure which will later be used for per-vlan global context.
No functional changes intended.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out the port's multicast context into a separate structure which
will later be shared for per-port,vlan context. No functional changes
intended. We need the structure even if bridge multicast is not defined
to pass down as pointer to forwarding functions.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bcm2835_spi_transfer_one function can create a deadlock
if it is called while another thread already has the
CCF lock.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Fixes: f8043872e7 ("spi: add driver for BCM2835")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit cf8331825a.
There are better Linux interfaces to export the different LED modes
and blinking reasons.
Revert this patch for now and come up with better solution later.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20210719101640.16047-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, VF doesn't enable rx VLAN offload when initializating,
and PF does it for VFs. If user disable the rx VLAN offload for
VF with ethtool -K, and reload the VF driver, it may cause the
rx VLAN offload state being inconsistent between hardware and
software.
Fixes it by enabling rx VLAN offload when VF initializing.
Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For hardware limitation, port VLAN filter is port level, and
effective for all the functions of the port. So if not support
port VLAN bypass, it's necessary to disable the port VLAN filter,
in order to support function level VLAN filter control.
Fixes: 2ba306627f ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When VF need response from PF, VF will wait (1us - 1s) to receive
the response, or it will wait timeout and the VF action fails.
If VF do not receive response in 1st action because timeout,
the 2nd action may receive response for the 1st action, and get
incorrect response data.VF must reciveve the right response from
PF,or it will cause unexpected error.
This patch adds match_id to check mailbox response from PF to VF,
to make sure VF get the right response:
1. The message sent from VF was labelled with match_id which was a
unique 16-bit non-zero value.
2. The response sent from PF will label with match_id which got from
the request.
3. The VF uses the match_id to match request and response message.
This scheme depends on PF driver supports match_id, if PF driver doesn't
support then VF will uses the original scheme.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the mailbox synchronous communication between VF and PF use
the following fields to maintain communication:
1. Origin_mbx_msg which was combined by message code and subcode, used
to match request and response.
2. Received_resp which means whether received response.
There may possible mismatches of the following situation:
1. VF sends message A with code=1 subcode=1.
2. PF was blocked about 500ms when processing the message A.
3. VF will detect message A timeout because it can't get the response
within 500ms.
4. VF sends message B with code=1 subcode=1 which equal message A.
5. PF processes the first message A and send the response message to
VF.
6. VF will identify the response matched the message B because the
code/subcode is the same. This will lead to mismatch of request and
response.
To fix the above bug, we use the following scheme:
1. The message sent from VF was labelled with match_id which was a
unique 16-bit non-zero value.
2. The response sent from PF will label with match_id which got from
the request.
3. The VF uses the match_id to match request and response message.
As for PF driver, it only needs to copy the match_id from request to
response.
Fixes: dde1a86e93 ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This simple script:
ip link add br0 type bridge
ip link set swp2 master br0
ip link set br0 address 00:01:02:03:04:05
ip link del br0
produces this result on a DSA switch:
[ 421.306399] br0: port 1(swp2) entered blocking state
[ 421.311445] br0: port 1(swp2) entered disabled state
[ 421.472553] device swp2 entered promiscuous mode
[ 421.488986] device swp2 left promiscuous mode
[ 421.493508] br0: port 1(swp2) entered disabled state
[ 421.886107] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 1 from fdb: -ENOENT
[ 421.894374] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 0 from fdb: -ENOENT
[ 421.943982] br0: port 1(swp2) entered blocking state
[ 421.949030] br0: port 1(swp2) entered disabled state
[ 422.112504] device swp2 entered promiscuous mode
A very simplified view of what happens is:
(1) the bridge port is created, and the bridge device inherits its MAC
address
(2) when joining, the bridge port (DSA) requests a replay of the
addition of all FDB entries towards this bridge port and towards the
bridge device itself. In fact, DSA calls br_fdb_replay() twice:
br_fdb_replay(br, brport_dev);
br_fdb_replay(br, br);
DSA uses reference counting for the FDB entries. So the MAC address
of the bridge is simply kept with refcount 2. When the bridge port
leaves under normal circumstances, everything cancels out since the
replay of the FDB entry deletion is also done twice per VLAN.
(3) when the bridge MAC address changes, switchdev is notified of the
deletion of the old address and of the insertion of the new one.
But the old address does not really go away, since it had refcount
2, and the new address is added "only" with refcount 1.
(4) when the bridge port leaves now, it will replay a deletion of the
FDB entries pointing towards the bridge twice. Then DSA will
complain that it can't delete something that no longer exists.
It is clear that the problem is that the FDB entries towards the bridge
are replayed too many times, so let's fix that problem.
Fixes: 63c51453c8 ("net: dsa: replay the local bridge FDB entries pointing to the bridge dev too")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210719093916.4099032-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update maintainers for MediaTek switch driver with Deng Qingfang who has
contributed many high-quality patches (interrupt, VLAN, GPIO, and etc.)
and will help maintenance.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/49e1aa8aac58dcbf1b5e036d09b3fa3bbb1d94d0.1626751861.git.landen.chao@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After cited commit, sysctl_tcp_fastopen_blackhole_timeout is no longer
a global variable.
Fixes: 3733be14a3 ("ipv4: Namespaceify tcp_fastopen_blackhole_timeout knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Link: https://lore.kernel.org/r/20210719092028.3016745-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yonghong Song report:
The bpf selftest tc_bpf failed with latest bpf-next.
The following is the command to run and the result:
$ ./test_progs -n 132
[ 40.947571] bpf_testmod: loading out-of-tree module taints kernel.
test_tc_bpf:PASS:test_tc_bpf__open_and_load 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create(BPF_TC_INGRESS) 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create invalid hook.attach_point 0 nsec
test_tc_bpf_basic:PASS:bpf_obj_get_info_by_fd 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach replace mode 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_query 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
libbpf: Kernel error message: Failed to send filter delete notification
test_tc_bpf_basic:FAIL:bpf_tc_detach unexpected error: -3 (errno 3)
test_tc_bpf:FAIL:test_tc_internal ingress unexpected error: -3 (errno 3)
The failure seems due to the commit
cfdf0d9ae7 ("rtnetlink: use nlmsg_notify() in rtnetlink_send()")
Deal with ESRCH error in nlmsg_notify() even the report variable is zero.
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210719051816.11762-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
