RKL power wells are similar to TGL power wells, but have some important
differences:
* PG1 now has pipe A's VDSC (rather than sticking it in PG2)
* PG2 no longer exists
* DDI-C (aka TC-1) moves from PG1 -> PG3
* PG5 no longer exists due to the lack of a fourth pipe
Also note that what we refer to as 'DDI-C' and 'DDI-D' need to actually
be programmed as TC-1 and TC-2 even though this platform doesn't have TC
outputs.
Bspec: 49234
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-9-matthew.d.roper@intel.com
RKL only has five universal planes, plus a cursor. Since the
bottom-most universal plane is considered the primary plane, set the
number of sprites available on this platform to 4.
In general, the plane capabilities of the remaining planes stay the same
as TGL. However the NV12 Y-plane support moves down to the new top two
planes and now only the bottom three planes can be used for NV12 UV.
Bspec: 49181
Bspec: 49251
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-8-matthew.d.roper@intel.com
The RKL platform has different memory characteristics from past
platforms. Update the values used by our memory bandwidth calculations
accordingly.
Bspec: 53998
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-7-matthew.d.roper@intel.com
RKL re-uses the same stolen memory registers as TGL and ICL.
Bspec: 52055
Bspec: 49589
Bspec: 49636
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-3-matthew.d.roper@intel.com
This assertion was removed in commit b412c63f1c ("drm/i915/gt: Report
context-is-closed prior to pinning"), but accidentally restored by a
cherry-pick into drm-next and now has percolated back to
drm-intel-next-queued.
Fixes: 2e46a2a0b0 ("drm/i915: Use explicit flag to mark unreachable intel_context")
Fixes: 2b703bbda2 ("Merge drm/drm-next into drm-intel-next-queued")
References: b412c63f1c ("drm/i915/gt: Report context-is-closed prior to pinning")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520073048.2394034-1-chris@chris-wilson.co.uk
RKL uses the same GuC and HuC as TGL and should load the same firmwares.
Bspec: 50668
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-4-matthew.d.roper@intel.com
It was quite the oversight to only factor in the normal queue to decide
the timeslicing switch priority. By leaving out the next virtual request
from the priority decision, we would not timeslice the current engine if
there was an available virtual request.
Testcase: igt/gem_exec_balancer/sliced
Fixes: 3df2deed41 ("drm/i915/execlists: Enable timeslice on partial virtual engine dequeue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519132046.22443-3-chris@chris-wilson.co.uk
If we decide to timeslice out the current virtual request, we will
unsubmit it while it is still busy (ve->context.inflight == sibling[0]).
If the virtual tasklet and then the other sibling tasklets run before we
completely schedule out the active virtual request for the preemption,
those other tasklets will see that the virtul request is still inflight
on sibling[0] and leave it be. Therefore when we finally schedule-out
the virtual request and if we see that we have passed it back to the
virtual engine, reschedule the virtual tasklet so that it may be
resubmitted on any of the siblings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519132046.22443-2-chris@chris-wilson.co.uk
Make sure that we can execute a virtual request on an already busy
engine, and conversely that we can execute a normal request if the
engines are already fully occupied by virtual requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519132046.22443-1-chris@chris-wilson.co.uk
When we look at i915_request_is_started() we must be careful in case we
are using a request that does not have the initial-breadcrumb and
instead the is-started is being compared against the end of the previous
request. This will make wait_for_submit() declare that a request has
been already submitted too early.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-4-chris@chris-wilson.co.uk
We recorded the execlists->queue_priority_hint update for the inflight
request without kicking the tasklet. The next submitted request then
failed to be scheduled as it had a lower priority than the hint, leaving
the HW running with only the inflight request.
Fixes: 6cebcf746f ("drm/i915: Tweak scheduler's kick_submission()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-1-chris@chris-wilson.co.uk
A useful metric of the system's health is how fast we can tell the GPU
to do various actions, so measure our latency.
v2: Refactor all the instruction building into emitters.
v3: Mark the error handling if not perfect, at least consistent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519130802.4067-1-chris@chris-wilson.co.uk
struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.
Prefer drm_WARN_ON over WARN_ON.
changes since v1:
- Add parentheses around the dev_priv macro argument (Jani)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-7-pankaj.laxminarayan.bharadiya@intel.com
struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.
Prefer drm_WARN* over WARN* at places where struct drm_device pointer
can be extracted.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-6-pankaj.laxminarayan.bharadiya@intel.com
struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.
Prefer drm_WARN_ON over WARN_ON.
Conversion is done with below sementic patch:
@@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
...+>
}
@@
identifier func, T;
@@
func(struct intel_digital_port *T,...) {
+struct drm_i915_private *i915 = to_i915(T->base.base.dev);
<+...
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
...+>
}
changes since v1:
- Add i915 local variable and use it in drm_WARN_ON (Jani)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-5-pankaj.laxminarayan.bharadiya@intel.com
struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.
Prefer drm_WARN* over WARN* calls.
changes since v1:
- Added dev_priv local variable and used it in drm_WARN* calls (Jani)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-4-pankaj.laxminarayan.bharadiya@intel.com
struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.
Prefer drm_WARN_ON over WARN_ON at places where struct i915_power_domains
struct is available.
Conversion is done with below sementic patch:
@@
identifier func, T;
@@
func(struct i915_power_domains *T,...) {
+ struct drm_i915_private *i915 = container_of(T, struct drm_i915_private, power_domains);
<+...
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
...+>
}
changes since v1:
- Fix commit subject (Jani)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-2-pankaj.laxminarayan.bharadiya@intel.com
Make sure to select the port's AUX power domain while holding the TC
port lock. The domain depends on the port's current TC mode, which may
get changed under us if we're not holding the lock.
This was left out from
commit 8c10e22626 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514204553.27193-1-imre.deak@intel.com
I've checked a bunch of gen3/4 machines and all seem to have
consistent FSB frequency information in the CLKCFG register.
So let's read out hrawclk on all gen3+ machines. Although
apart from g4x/pnv aux/pps dividers we only really need this
for for i965g/gm cs timestamp increment.
The CLKCFG memory clock values seem less consistent but we
don't care about those here.
For posterity here's a list of CLKCFG vs. FSB dumps from
a bunch of machines (only missing lpt for a full set):
machine CLKCFG FSB
alv1 0x00001411 533
alv2 0x00000420 400 (Chris)
gdg1 0x20000022 800
gdg2 0x20000022 800
cst 0x00010043 666
blb 0x00002034 1333
pnv1 0x00000423 666
pnv2 0x00000433 666
965gm 0x00004342 800
946gz 0x00000022 800
965g 0x00000422 800
g35 0x00000430 1066
0x00000434 1333
ctg1 0x00644056 1066
ctg2 0x00644066 1066
elk1 0x00012420 1066
0x00012424 1333
0x00012436 1600
0x00012422 800
elk2 0x00012040 1066
For the mobile parts the chipset docs generally have these
documented to some degree (alv being the exception).
The two settings w/o any evidence are 0x5=400MHz on desktop
and 0x7=1333MHz on mobile. Though the mobile 1333MHz case
probably doesn't even exist since ctg is only documented
to go up to 1066MHz.
v2: Fix 400mhz readout for Chris's alv/celeron machine
Do a clean mobile vs. dekstop split since that's really
what seems to be going on
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514123838.3017-3-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Document the fact that we aren't reading out the actual FSB
frequency but rather just the state of the FSB straps.
Some BIOSen allow you to configure the two independently.
So if someone sets the two up in an inconsistent manner
we'll get the wrong answer here and thus will end up with
incorrect aux/pps clock dividers. Alas, proper docs are no
longer around so we can't do any better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514123838.3017-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Looks like elk redefines some of the CLKCFG FSB values to
make room for 400 MHz FSB. The setting overlaps with one of
the 266MHz settings (which is even documented in the ctg docs,
and cofirmed to be correct on my ctg). So we limit the special
case to elk only.
Though it might also be that we have some kind of desktop vs.
mobile difference going on here as eg. both g35 and elk
use 0x0 for the 266 MHz setting, vs. 0x6 used by ctg). The
g35 doesn't let me select 400MHz for the FSB strap so can't
confirm which way it would go here. But anyways as it seems
only elk has the 400MHz option we shouldn't lose anything
by limiting the special case to it alone.
My earlier experiments on this appear to have been nonsense as
the comment I added claims that FSB strap of 400MHz results in
a value of 0x4, but I've now retested it and I definitely get a
value of 0x6 instead. So let's remove that bogus comment.
v2: s/_ELK/_ALT/ in the define in anticipation of a full
mobile vs. desktop CLKCFG split
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514123838.3017-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
The current dbuf slice computation only happens when there are
active pipes. If we are turning off all the pipes we just leave
the dbuf slice mask at it's previous value, which may be something
other that BIT(S1). If runtime PM will kick in it will however
turn off everything but S1. Then on the next atomic commit (if
the new dbuf slice mask matches the stale value we left behind)
the code will not turn on the other slices we now need. This will
lead to underruns as the planes are trying to use a dbuf slice
that's not powered up.
To work around let's just just explicitly set the dbuf slice mask
to BIT(S1) when we are turning off all the pipes. Really the code
should just calculate this stuff the same way regardless whether
the pipes are on or off, but we're not quite there yet (need a
bit more work on the dbuf state for that).
v2: Let's not put the fix into dead code
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 3cf43cdc63 ("drm/i915: Introduce proper dbuf state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200518121354.20401-1-ville.syrjala@linux.intel.com
Tvrtko spotted that some selftests were using 'break' not 'continue',
which will fail for discontiguous engine layouts such as on Icelake
(which may have vcs0 and vcs2).
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200518102911.3463-1-chris@chris-wilson.co.uk
When CONFIG_DRM_I915_DEBUG_GEM is not set, clang warns:
drivers/gpu/drm/i915/gvt/scheduler.c:884:1: warning: function
'check_shadow_context_ppgtt' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
check_shadow_context_ppgtt(struct execlist_ring_context *c, struct
intel_vgpu_mm *m)
^
1 warning generated.
This warning is similar to -Wunused-function but rather than warning
that the function is completely unused, it warns that it is used in some
expression within the file but that expression will be evaluated to a
constant or be optimized away in the final assembly, essentially making
it appeared used but really isn't. Usually, this happens when a function
or variable is only used in sizeof, where it will appear to be used but
will be evaluated at compile time and not be required to be emitted.
In this case, the function is only used in GEM_BUG_ON, which is defined
as BUILD_BUG_ON_INVALID, which intentionally follows this pattern. To
fix this warning, add __maybe_unused to make it clear that this is
intentional depending on the configuration.
Fixes: bec3df930f ("drm/i915/gvt: Support PPGTT table load command")
Link: https://github.com/ClangBuiltLinux/linux/issues/1027
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200516023545.3332334-1-natechancellor@gmail.com
As we no longer use the shmemfs allocation directly, we do not expect to
receive -ENOSPC from a backing store allocation. The potential sources
for -ENOSPC are then our own internal eviction code, so the choice is
either to kill the potential application with SIGBUS or to retry the
faulthandler.
In this patch we retry the fault handler, but since this is a should
never happen condition, it is arguable that we gather up copious debug
and kill the application. At worst, we cause an interruptible busy-wait,
stalling the application -- all causes should be transient and the
system should eventually recover. A small stall is hopefully a better
outcome than random oomkiller.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515200031.12034-1-chris@chris-wilson.co.uk
Combine the two per-pipe dbuf debugs into one, and use the canonical
[CRTC:%d:%s] style to identify the crtc. Also use the same style as
the plane code uses for the ddb start/end, and prefix bitmask properly
with 0x to make it clear they are in fact bitmasks.
The "how many total slices we are going to use" debug we move to
outside the crtc loop so it gets printed only once at the end.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-12-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Encapsulate the dbuf state more by moving the pre/post
plane functions out from intel_display.c. We stick them
into intel_pm.c since that's where the rest of the code
lives for now.
Eventually we should add a new file for this stuff at which
point we also need to decide if it makes sense to even split
the wm code from the ddb code, or to keep them together.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-11-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Add a global state to track the dbuf slices. Gets rid of all the nasty
coupling between state->modeset and dbuf recomputation. Also we can now
totally nuke state->active_pipe_changes.
dev_priv->wm.distrust_bios_wm still remains, but that too will get
nuked soon.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The low level dbuf slice code is rather inconsitent with its
functiona naming and organization. Make it more consistent.
Also share the enable/disable functions between all platforms
since the same code works just fine for all of them.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Polish some of the dbuf code to give more meaningful debug
messages and whatnot. Also we can switch over to the per-device
debugs/warns at the same time.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Currently skl_compute_dbuf_slices() returns 0 for any inactive pipe on
icl+, but returns BIT(S1) on pre-icl for any pipe (whether it's active or
not). Let's make the behaviour consistent and always return 0 for any
inactive pipe.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
After the function is no longer marked 'inline', there
is now a new warning pointing out that the only caller
is inside of an #ifdef:
drivers/gpu/drm/i915/display/intel_panel.c:493:12: warning: 'scale_user_to_hw' defined but not used [-Wunused-function]
493 | static u32 scale_user_to_hw(struct intel_connector *connector,
| ^~~~~~~~~~~~~~~~
Move the function itself into that #ifdef as well.
Fixes: 81b55ef1f4 ("drm/i915: drop a bunch of superfluous inlines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428213106.3139170-1-arnd@arndb.de
Put the overlay color conversion unit into 10bit mode if the
pipe isn't using the 8bit legacy gamma. Not 100% sure this is
what the intention of the bit was but makes at least some sense to
me.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-4-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
As with the video sprites the colorkey is always specified
as 8bpc. For 10bpc primary plane formats we just ignore the
two lsbs of each component. For C8 we'll replicate the same
key to each chanel, which is what the hardware wants.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Apparently the 128x128 and 256x256 ARGB cursor modes were
only added on LPT/CST.
While the display section of bspec isn't super clear on the
subject, it does highlight these two modes in a different
color, has a few changlog entries indicating the 256x256 mode
was added for a LPT DCN, and that the 128x128 mode was also
added later (though no DCN/platform note there).
The "device dependencies" bspec section does list the 256x256x32
as a new feature for LPT/CST, and goes on to mention that current
hw only has the 64x64x32 mode (which reinforces the notion that
the 128x128 mode was also added at the same time).
Testing on actual hardware confirms all of this. CI shows all
the 128x128 and 256x256 tests failing on GDG, and my ALV
definitely doesn't like them.
So we shall limit GDG/ALV to 64x64 only. And while at it
let's adjust the mobile gen2 case to list the two platforms
explicitly so that the if-ladder looks reasonably uniform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-2-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
