[ Upstream commit 66419036f6 ]
An Interrupt Remapping Table (IRT) stores interrupt remapping configuration
for each device. In a normal operation, the AMD IOMMU caches the table
to optimize subsequent data accesses. This requires the IOMMU driver to
invalidate IRT whenever it updates the table. The invalidation process
includes issuing an INVALIDATE_INTERRUPT_TABLE command following by
a COMPLETION_WAIT command.
However, there are cases in which the IRT is updated at a high rate.
For example, for IOMMU AVIC, the IRTE[IsRun] bit is updated on every
vcpu scheduling (i.e. amd_iommu_update_ga()). On system with large
amount of vcpus and VFIO PCI pass-through devices, the invalidation
process could potentially become a performance bottleneck.
Introducing a new kernel boot option:
amd_iommu=irtcachedis
which disables IRTE caching by setting the IRTCachedis bit in each IOMMU
Control register, and bypass the IRT invalidation process.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Co-developed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230530141137.14376-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48aea8b445 ]
Adds the USB and Bluetooth IDs for the Logitech G915 TKL keyboard, for device detection
For this device, this provides battery reporting on top of hid-generic
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8b9cea584 ]
Currently upon a heartbeat failure, we don't know if the failure
is due to firmware hang or due to a bad PCI link. Hence, we
are reading a PCI config space register with a known value (vendor ID)
so we will know which of the two possibilities caused the heartbeat
failure.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f751b99255 ]
The functionality described in Commit 61bef9e68d ("ASoC: SOF: Intel: hda: enforce exclusion between HDaudio and SoundWire")
does not seem to be properly implemented with two issues that need to
be corrected.
a) The test used is incorrect when DisplayAudio codecs are not supported.
b) Conversely when only Display Audio codecs can be found, we do want
to start the SoundWire links, if any. That will help add the relevant
topologies and machine descriptors, and identify cases where the
SoundWire information in ACPI needs to be modified with a quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b407460ee9 ]
It is considered good practice to call cpu_relax() in busy loops, see
Documentation/process/volatile-considered-harmful.rst. This can not
only lower CPU power consumption or yield to a hyperthreaded twin
processor, but also allows an architecture to mitigate hardware issues
(e.g. ARM Erratum 754327 for Cortex-A9 prior to r2p0) in the
architecture-specific cpu_relax() implementation.
In addition, cpu_relax() is also a compiler barrier. It is not
immediately obvious that the @op argument "function" will result in an
actual function call (e.g. in case of inlining).
Where a function call is a C sequence point, this is lost on inlining.
Therefore, with agressive enough optimization it might be possible for
the compiler to hoist the:
(val) = op(args);
"load" out of the loop because it doesn't see the value changing. The
addition of cpu_relax() would inhibit this.
As the iopoll helpers lack calls to cpu_relax(), people are sometimes
reluctant to use them, and may fall back to open-coded polling loops
(including cpu_relax() calls) instead.
Fix this by adding calls to cpu_relax() to the iopoll helpers:
- For the non-atomic case, it is sufficient to call cpu_relax() in
case of a zero sleep-between-reads value, as a call to
usleep_range() is a safe barrier otherwise. However, it doesn't
hurt to add the call regardless, for simplicity, and for similarity
with the atomic case below.
- For the atomic case, cpu_relax() must be called regardless of the
sleep-between-reads value, as there is no guarantee all
architecture-specific implementations of udelay() handle this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/45c87bec3397fdd704376807f0eec5cc71be440f.1685692810.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 526a1876fc ]
if (!SOF_RT711_JDSRC(sof_sdw_quirk)) is tested in rt711_sdca_add_codec_
device_props(), and we don't add software node to the device if jack
source is not set. We need to do the same test in
sof_sdw_rt711_sdca_exit(), and avoid removing software node if jack
source is not set.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d14bd943f ]
Fix USB-related warnings in prtrvt, prtvt7, prti6q and prtwd2 device trees
by disabling unused usbphynop1 and usbphynop2 USB PHYs and providing proper
configuration for the over-current detection. This fixes the following
warnings with the current kernel:
usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
imx_usb 2184200.usb: No over current polarity defined
By the way, fix over-current detection on usbotg port for prtvt7, prti6q
and prtwd2 boards. Only prtrvt do not have OC on USB OTG port.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e89f45edb7 ]
We have SOF and generic ACP support enabled for Vangogh platform
on some machines. Since we have same PCI id used for probing,
add check for machine configuration flag to avoid conflict with
newer pci drivers. Such machine flag has been initialized via
dmi match on few Vangogh based machines. If no flag is
specified probe and register older platform device.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230530110802.674939-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2da4b728f9 ]
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
for this SoC and prevent booting it. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 205b3d02d5 ]
Add check to fix the possible array out of bounds violation by
making speed equal to GEN1_CORE_CLK_FREQ when its value is more
than the size of "pcie_gen_freq" array. This array has size of
four but possible speed (CLS) values are from "0 to 0xF". So,
"speed - 1" values are "-1 to 0xE".
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@nvidia.com/
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfe25fea96 ]
We should use RT711_JD2_100K for on board rt711
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 289e1df00e ]
We should use RT711_JD2_100K for on board rt711.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31d7c3a4fc ]
The fences associated with mes queue have to be freed
up during amdgpu_ring_fini.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87c2213e85 ]
The type of size is unsigned int, if size is 0x40000000, there will
be an integer overflow, size will be zero after size *= sizeof(uint32_t),
will cause uninitialized memory to be referenced later.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: hackyzh002 <hackyzh002@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0138250150 ]
The following call trace is observed when removing the amdgpu driver, which
is caused by that BOs allocated for psp are not freed until removing.
[61811.450562] RIP: 0010:amddrm_buddy_fini.cold+0x29/0x47 [amddrm_buddy]
[61811.450577] Call Trace:
[61811.450577] <TASK>
[61811.450579] amdgpu_vram_mgr_fini+0x135/0x1c0 [amdgpu]
[61811.450728] amdgpu_ttm_fini+0x207/0x290 [amdgpu]
[61811.450870] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[61811.451012] gmc_v9_0_sw_fini+0x4a/0x60 [amdgpu]
[61811.451166] amdgpu_device_fini_sw+0x117/0x520 [amdgpu]
[61811.451306] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[61811.451447] devm_drm_dev_init_release+0x4d/0x80 [drm]
[61811.451466] devm_action_release+0x15/0x20
[61811.451469] release_nodes+0x40/0xb0
[61811.451471] devres_release_all+0x9b/0xd0
[61811.451473] __device_release_driver+0x1bb/0x2a0
[61811.451476] driver_detach+0xf3/0x140
[61811.451479] bus_remove_driver+0x6c/0xf0
[61811.451481] driver_unregister+0x31/0x60
[61811.451483] pci_unregister_driver+0x40/0x90
[61811.451486] amdgpu_exit+0x15/0x447 [amdgpu]
For smu v13_0_2, if the GPU supports xgmi, refer to
commit f5c7e77970 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2"),
it will run gpu recover in AMDGPU_RESET_FOR_DEVICE_REMOVE mode when removing,
which makes all devices in hive list have hw reset but no resume except the
basic ip blocks, then other ip blocks will not call .hw_fini according to
ip_block.status.hw.
Since psp_free_shared_bufs just includes some software operations, so move
it to psp_sw_fini.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Longlong Yao <Longlong.Yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e58f30246c ]
In commit 7beecaf7d5 ("net: phy: at803x: improve the WOL feature"), it
seems not correct to use a wol_en bit in a 1588 Control Register which is
only available on AR8031/AR8033(share the same phy_id) to determine if WoL
is enabled. Change it back to use AT803X_INTR_ENABLE_WOL for determining
the WoL status which is applicable on all chips supporting wol. Also update
the at803x_set_wol() function to only update the 1588 register on chips
having it. After this change, disabling wol at probe from commit
d7cd5e06c9 ("net: phy: at803x: disable WOL at probe") is no longer
needed. Change it to just disable the WoL bit in 1588 register for
AR8031/AR8033 to be aligned with AT803X_INTR_ENABLE_WOL in probe.
Fixes: 7beecaf7d5 ("net: phy: at803x: improve the WOL feature")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 988e8d90b3 ]
Use devm_regulator_get_enable_optional() instead of hand writing it. It
saves some line of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e58f30246c ("net: phy: at803x: fix the wol setting functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 833bac7ec3 ]
Commit 0227f058aa ("net/smc: Unbind r/w buffer size from clcsock
and make them tunable") introduced the net.smc.rmem and net.smc.wmem
sysctls to specify the size of buffers to be used for SMC type
connections. This created a regression for users that specified the
buffer size via setsockopt() as the effective buffer size was now
doubled.
Re-introduce the division by 2 in the SMC buffer create code and level
this out by duplicating the net.smc.[rw]mem values used for initializing
sk_rcvbuf/sk_sndbuf at socket creation time. This gives users of both
methods (setsockopt or sysctl) the effective buffer size that they
expect.
Initialize net.smc.[rw]mem from its own constant of 64kB, respectively.
Internal performance tests show that this value is a good compromise
between throughput/latency and memory consumption. Also, this decouples
it from any tuning that was done to net.ipv4.tcp_[rw]mem[1] before the
module for SMC protocol was loaded. Check that no more than INT_MAX / 2
is assigned to net.smc.[rw]mem, in order to avoid any overflow condition
when that is doubled for use in sk_sndbuf or sk_rcvbuf.
While at it, drop the confusing sk_buf_size variable from
__smc_buf_create and name "compressed" buffer size variables more
consistently.
Background:
Before the commit mentioned above, SMC's buffer allocator in
__smc_buf_create() always used half of the sockets' sk_rcvbuf/sk_sndbuf
value as initial value to search for appropriate buffers. If the search
resorted to using a bigger buffer when all buffers of the specified
size were busy, the duplicate of the used effective buffer size is
stored back to sk_rcvbuf/sk_sndbuf.
When available, buffers of exactly the size that a user had specified as
input to setsockopt() were used, despite setsockopt()'s documentation in
"man 7 socket" talking of a mandatory duplication:
[...]
SO_SNDBUF
Sets or gets the maximum socket send buffer in bytes.
The kernel doubles this value (to allow space for book‐
keeping overhead) when it is set using setsockopt(2),
and this doubled value is returned by getsockopt(2).
The default value is set by the
/proc/sys/net/core/wmem_default file and the maximum
allowed value is set by the /proc/sys/net/core/wmem_max
file. The minimum (doubled) value for this option is
2048.
[...]
Fixes: 0227f058aa ("net/smc: Unbind r/w buffer size from clcsock and make them tunable")
Co-developed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aff7bfed90 ]
It's clear that rmbs_lock and sndbufs_lock are aims to protect the
rmbs list or the sndbufs list.
During connection establieshment, smc_buf_get_slot() will always
be invoked, and it only performs read semantics in rmbs list and
sndbufs list.
Based on the above considerations, we replace mutex with rw_semaphore.
Only smc_buf_get_slot() use down_read() to allow smc_buf_get_slot()
run concurrently, other part use down_write() to keep exclusive
semantics.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 833bac7ec3 ("net/smc: Fix setsockopt and sysctl to specify same buffer size again")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e8670610b ]
The test relies on 'nc' being the netcat version from the nmap project.
While this seems to be the case on Fedora, it is not the case on Ubuntu,
resulting in failures such as [1].
Fix by explicitly using the 'ncat' utility from the nmap project and the
skip the test in case it is not installed.
[1]
# timeout set to 0
# selftests: net/forwarding: tc_actions.sh
# TEST: gact drop and ok (skip_hw) [ OK ]
# TEST: mirred egress flower redirect (skip_hw) [ OK ]
# TEST: mirred egress flower mirror (skip_hw) [ OK ]
# TEST: mirred egress matchall mirror (skip_hw) [ OK ]
# TEST: mirred_egress_to_ingress (skip_hw) [ OK ]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
# [-m minttl] [-O length] [-P proxy_username] [-p source_port]
# [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
# [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
# [destination] [port]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
# [-m minttl] [-O length] [-P proxy_username] [-p source_port]
# [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
# [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
# [destination] [port]
# TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL]
# server output check failed
# INFO: Could not test offloaded functionality
not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1
Fixes: ca22da2fbd ("act_mirred: use the backlog for nested calls to mirred ingress")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f58531716c ]
remove temporary files created by 'mirred_egress_to_ingress_tcp' test
in the cleanup() handler. Also, change variable names to avoid clashing
with globals from lib.sh.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/091649045a017fc00095ecbb75884e5681f7025f.1676368027.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5e8670610b ("selftests: forwarding: tc_actions: Use ncat instead of nc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b5d1e47b6 ]
We encountered many kernel exceptions of VM_BUG_ON(zspage->isolated ==
0) in dec_zspage_isolation() and BUG_ON(!pages[1]) in zs_unmap_object()
lately. This issue only occurs when migration and reclamation occur at
the same time.
With our memory stress test, we can reproduce this issue several times
a day. We have no idea why no one else encountered this issue. BTW,
we switched to the new kernel version with this defect a few months
ago.
Since fullness and isolated share the same unsigned int, modifications of
them should be protected by the same lock.
[andrew.yang@mediatek.com: move comment]
Link: https://lkml.kernel.org/r/20230727062910.6337-1-andrew.yang@mediatek.com
Link: https://lkml.kernel.org/r/20230721063705.11455-1-andrew.yang@mediatek.com
Fixes: c4549b8711 ("zsmalloc: remove zspage isolation for migration")
Signed-off-by: Andrew Yang <andrew.yang@mediatek.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0547d0b6a ]
Currently, zsmalloc has a hierarchy of locks, which includes a pool-level
migrate_lock, and a lock for each size class. We have to obtain both
locks in the hotpath in most cases anyway, except for zs_malloc. This
exception will no longer exist when we introduce a LRU into the zs_pool
for the new writeback functionality - we will need to obtain a pool-level
lock to synchronize LRU handling even in zs_malloc.
In preparation for zsmalloc writeback, consolidate these locks into a
single pool-level lock, which drastically reduces the complexity of
synchronization in zsmalloc.
We have also benchmarked the lock consolidation to see the performance
effect of this change on zram.
First, we ran a synthetic FS workload on a server machine with 36 cores
(same machine for all runs), using
fs_mark -d ../zram1mnt -s 100000 -n 2500 -t 32 -k
before and after for btrfs and ext4 on zram (FS usage is 80%).
Here is the result (unit is file/second):
With lock consolidation (btrfs):
Average: 13520.2, Median: 13531.0, Stddev: 137.5961482019028
Without lock consolidation (btrfs):
Average: 13487.2, Median: 13575.0, Stddev: 309.08283679298665
With lock consolidation (ext4):
Average: 16824.4, Median: 16839.0, Stddev: 89.97388510006668
Without lock consolidation (ext4)
Average: 16958.0, Median: 16986.0, Stddev: 194.7370021336469
As you can see, we observe a 0.3% regression for btrfs, and a 0.9%
regression for ext4. This is a small, barely measurable difference in my
opinion.
For a more realistic scenario, we also tries building the kernel on zram.
Here is the time it takes (in seconds):
With lock consolidation (btrfs):
real
Average: 319.6, Median: 320.0, Stddev: 0.8944271909999159
user
Average: 6894.2, Median: 6895.0, Stddev: 25.528415540334656
sys
Average: 521.4, Median: 522.0, Stddev: 1.51657508881031
Without lock consolidation (btrfs):
real
Average: 319.8, Median: 320.0, Stddev: 0.8366600265340756
user
Average: 6896.6, Median: 6899.0, Stddev: 16.04057355583023
sys
Average: 520.6, Median: 521.0, Stddev: 1.140175425099138
With lock consolidation (ext4):
real
Average: 320.0, Median: 319.0, Stddev: 1.4142135623730951
user
Average: 6896.8, Median: 6878.0, Stddev: 28.621670111997307
sys
Average: 521.2, Median: 521.0, Stddev: 1.7888543819998317
Without lock consolidation (ext4)
real
Average: 319.6, Median: 319.0, Stddev: 0.8944271909999159
user
Average: 6886.2, Median: 6887.0, Stddev: 16.93221781102523
sys
Average: 520.4, Median: 520.0, Stddev: 1.140175425099138
The difference is entirely within the noise of a typical run on zram.
This hardly justifies the complexity of maintaining both the pool lock and
the class lock. In fact, for writeback, we would need to introduce yet
another lock to prevent data races on the pool's LRU, further complicating
the lock handling logic. IMHO, it is just better to collapse all of these
into a single pool-level lock.
Link: https://lkml.kernel.org/r/20221128191616.1261026-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 4b5d1e47b6 ("zsmalloc: fix races between modifications of fullness and isolated")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12acb348fa ]
A switch from OSI to PC mode is only possible if all CPUs other than the
calling one are OFF, either through a call to CPU_OFF or not yet booted.
Currently OSI mode is enabled before power domains are created. In cases
where CPUidle states are not using hierarchical CPU topology the bail out
path tries to switch back to PC mode which gets denied by firmware since
other CPUs are online at this point and creates inconsistent state as
firmware is in OSI mode and Linux in PC mode.
This change moves enabling OSI mode after power domains are created,
this would makes sure that hierarchical CPU topology is used before
switching firmware to OSI mode.
Cc: stable@vger.kernel.org
Fixes: 70c179b498 ("cpuidle: psci: Allow PM domain to be initialized even if no OSI mode")
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668057b07d ]
It's useful to understand whether we are using OS-initiated (OSI) mode or
Platform Coordinated (PC) mode, when initializing the CPU PM domains.
Therefore, let's extend the print in the log after a successful probe with
this information.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 12acb348fa ("cpuidle: psci: Move enabling OSI mode after power domains creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5def5c1c15 ]
Even if sdhci_pltfm_pmops is specified for PM, this driver doesn't apply
sdhci_pltfm, so the structure is not correctly referenced in PM functions.
This applies sdhci_pltfm to this driver to fix this issue.
- Call sdhci_pltfm_init() instead of sdhci_alloc_host() and
other functions that covered by sdhci_pltfm.
- Move ops and quirks to sdhci_pltfm_data
- Replace sdhci_priv() with own private function sdhci_f_sdh30_priv().
Fixes: 87a507459f ("mmc: sdhci: host: add new f_sdh30")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230630004533.26644-1-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 63a9ab264a upstream.
Move variable declarations to where they are used. Fixes
a segfault on smu7 V0 structures where some tables don't
exist.
Cc: Evan Quan <evan.quan@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2388
Fixes: b1a9557a7d ("drm/amd/pm: fulfill powerplay peak profiling mode shader/memory clock settings")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11b73313c1 upstream.
In blamed commit, I missed that get_dist_table() was allocating
memory using GFP_KERNEL, and acquiring qdisc lock to perform
the swap of newly allocated table with current one.
In this patch, get_dist_table() is allocating memory and
copy user data before we acquire the qdisc lock.
Then we perform swap operations while being protected by the lock.
Note that after this patch netem_change() no longer can do partial changes.
If an error is returned, qdisc conf is left unchanged.
Fixes: 2174a08db8 ("sch_netem: acquire qdisc lock in netem_change()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230622181503.2327695-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ccbd7fd47 upstream.
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization.
Commit c5a130325f ("ACPI/APEI: Add parameter check before error
injection") exported page_is_ram(), hence the __init annotation should
be removed.
This fixes the modpost warning in ARCH=alpha builds:
WARNING: modpost: vmlinux: page_is_ram: EXPORT_SYMBOL used for init symbol. Remove __init or EXPORT_SYMBOL.
Fixes: c5a130325f ("ACPI/APEI: Add parameter check before error injection")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cd0302be5 upstream.
The ACPI device CSC3556 is a Cirrus Logic CS35L56 mono amplifier which
is used in multiples, and can be connected either to I2C or SPI.
There will be multiple instances under the same Device() node. Add it
to ignore_serial_bus_ids and handle it in the serial-multi-instantiate
driver.
There can be a 5th I2cSerialBusV2, but this is an alias address and doesn't
represent a real device. Ignore this by having a dummy 5th entry in the
serial-multi-instantiate instance list with the name of a non-existent
driver, on the same pattern as done for bsg2150.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230728111345.7224-1-rf@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 676b7c5eca upstream.
The current code assumes that the CSC3551(multiple cs35l41) always have
its interrupt pin connected to GPIO thus the IRQ can be acquired with
acpi_dev_gpio_irq_get. However on some newer laptop models this is no
longer the case as they have the CSC3551's interrupt pin connected to
APIC. This causes smi_i2c_probe to fail on these machines.
To support these machines, a new macro IRQ_RESOURCE_AUTO was introduced
for cs35l41 smi_node, and smi_get_irq function was modified so it tries
to get GPIO irq resource first and if failed, tries to get
APIC irq resource for cs35l41.
This patch affects only the cs35l41's probing and brings no negative
influence on machines that indeed have the cs35l41's interrupt pin
connected to GPIO.
Signed-off-by: David Xu <xuwd1@hotmail.com>
Link: https://lore.kernel.org/r/SY4P282MB18350CD8288687B87FFD2243E037A@SY4P282MB1835.AUSP282.PROD.OUTLOOK.COM
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef222f551e upstream.
While performing certain power-off sequences, PCI drivers are called to
suspend and resume their underlying devices through PCI PM (power
management) interface. However the hardware does not support PCI PM
suspend/resume operations so system wide suspend/resume leads to bad MFW
(management firmware) state which causes various follow-up errors in driver
when communicating with the device/firmware.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding system
to go into suspended/standby mode.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230807093725.46829-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1516ee035d upstream.
While performing certain power-off sequences, PCI drivers are called to
suspend and resume their underlying devices through PCI PM (power
management) interface. However the hardware does not support PCI PM
suspend/resume operations so system wide suspend/resume leads to bad MFW
(management firmware) state which causes various follow-up errors in driver
when communicating with the device/firmware.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding system
to go into suspended/standby mode.
Fixes: ace7f46ba5 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230807093725.46829-2-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a43b07a87 upstream.
fnic_clean_pending_aborts() was returning a non-zero value irrespective of
failure or success. This caused the caller of this function to assume that
the device reset had failed, even though it would succeed in most cases. As
a consequence, a successful device reset would escalate to host reset.
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20230727193919.2519-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04b5b5cb01 upstream.
If device_add() returns error, the name allocated by dev_set_name() needs
be freed. As the comment of device_add() says, put_device() should be used
to decrease the reference count in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanp().
Fixes: ee959b00c3 ("SCSI: convert struct class_device to struct device")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230803020230.226903-1-wangzhu9@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41320b18a0 upstream.
If device_add() returns error, the name allocated by dev_set_name() needs
be freed. As the comment of device_add() says, put_device() should be used
to give up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanp().
Fixes: c8806b6c9e ("snic: driver for Cisco SCSI HBA")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Link: https://lore.kernel.org/r/20230801111421.63651-1-wangzhu9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8366d1f124 upstream.
Add a check for the command slot value to avoid dereferencing a NULL
pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Co-developed-by: Vladimir Telezhnikov <vtelezhnikov@astralinux.ru>
Signed-off-by: Vladimir Telezhnikov <vtelezhnikov@astralinux.ru>
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Link: https://lore.kernel.org/r/20230728123521.18293-1-adiupina@astralinux.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6d128f89a upstream.
Should use devm_kzalloc() for struct ufs_renesas_priv because the
.initialized should be false as default.
Fixes: d69520288e ("scsi: ufs: ufs-renesas: Add support for Renesas R-Car UFS controller")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20230803081812.1446282-1-yoshihiro.shimoda.uh@renesas.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 175544ad48 upstream.
Hyper-V provides the ability to connect Fibre Channel LUNs to the host
system and present them in a guest VM as a SCSI device. I/O to the vFC
device is handled by the storvsc driver. The storvsc driver includes a
partial integration with the FC transport implemented in the generic
portion of the Linux SCSI subsystem so that FC attributes can be displayed
in /sys. However, the partial integration means that some aspects of vFC
don't work properly. Unfortunately, a full and correct integration isn't
practical because of limitations in what Hyper-V provides to the guest.
In particular, in the context of Hyper-V storvsc, the FC transport timeout
function fc_eh_timed_out() causes a kernel panic because it can't find the
rport and dereferences a NULL pointer. The original patch that added the
call from storvsc_eh_timed_out() to fc_eh_timed_out() is faulty in this
regard.
In many cases a timeout is due to a transient condition, so the situation
can be improved by just continuing to wait like with other I/O requests
issued by storvsc, and avoiding the guaranteed panic. For a permanent
failure, continuing to wait may result in a hung thread instead of a panic,
which again may be better.
So fix the panic by removing the storvsc call to fc_eh_timed_out(). This
allows storvsc to keep waiting for a response. The change has been tested
by users who experienced a panic in fc_eh_timed_out() due to transient
timeouts, and it solves their problem.
In the future we may want to deprecate the vFC functionality in storvsc
since it can't be fully fixed. But it has current users for whom it is
working well enough, so it should probably stay for a while longer.
Fixes: 3930d73098 ("scsi: storvsc: use default I/O timeout handler for FC devices")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1690606764-79669-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9426d3cef5 upstream.
(lightly modified commit message mostly by Linus Torvalds)
The parsing code for /proc/scsi/scsi is disgusting and broken. We should
have just used 'sscanf()' or something simple like that, but the logic may
actually predate our kernel sscanf library routine for all I know. It
certainly predates both git and BK histories.
And we can't change it to be something sane like that now, because the
string matching at the start is done case-insensitively, and the separator
parsing between numbers isn't done at all, so *any* separator will work,
including a possible terminating NUL character.
This interface is root-only, and entirely for legacy use, so there is
absolutely no point in trying to tighten up the parsing. Because any
separator has traditionally worked, it's entirely possible that people have
used random characters rather than the suggested space.
So don't bother to try to pretty it up, and let's just make a minimal patch
that can be back-ported and we can forget about this whole sorry thing for
another two decades.
Just make it at least not read past the end of the supplied data.
Link: https://lore.kernel.org/linux-scsi/b570f5fe-cb7c-863a-6ed9-f6774c219b88@cybernetics.com/
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin K Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: stable@kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1689f25924 upstream.
Overflow use refcount checks are not complete.
Add helper function to deal with object reference counter tracking.
Report -EMFILE in case UINT_MAX is reached.
nft_use_dec() splats in case that reference counter underflows,
which should not ever happen.
Add nft_use_inc_restore() and nft_use_dec_restore() which are used
to restore reference counter from error and abort paths.
Use u32 in nft_flowtable and nft_object since helper functions cannot
work on bitfields.
Remove the few early incomplete checks now that the helper functions
are in place and used to check for refcount overflow.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29b434d1e4 upstream.
Move start_freeze into nvme_rdma_configure_io_queues(), and there is
at least two benefits:
1) fix unbalanced freeze and unfreeze, since re-connection work may
fail or be broken by removal
2) IO during error recovery can be failfast quickly because nvme fabrics
unquiesces queues after teardown.
One side-effect is that !mpath request may timeout during connecting
because of queue topo change, but that looks not one big deal:
1) same problem exists with current code base
2) compared with !mpath, mpath use case is dominant
Fixes: 9f98772ba3 ("nvme-rdma: fix controller reset hang during traffic")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99dc264014 upstream.
Move start_freeze into nvme_tcp_configure_io_queues(), and there is
at least two benefits:
1) fix unbalanced freeze and unfreeze, since re-connection work may
fail or be broken by removal
2) IO during error recovery can be failfast quickly because nvme fabrics
unquiesces queues after teardown.
One side-effect is that !mpath request may timeout during connecting
because of queue topo change, but that looks not one big deal:
1) same problem exists with current code base
2) compared with !mpath, mpath use case is dominant
Fixes: 2875b0aeca ("nvme-tcp: fix controller reset hang during traffic")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92fb94b69c upstream.
We set cache_block_group_error if btrfs_cache_block_group() returns an
error, this is because we could end up not finding space to allocate and
mistakenly return -ENOSPC, and which could then abort the transaction
with the incorrect errno, and in the case of ENOSPC result in a
WARN_ON() that will trip up tests like generic/475.
However there's the case where multiple threads can be racing, one
thread gets the proper error, and the other thread doesn't actually call
btrfs_cache_block_group(), it instead sees ->cached ==
BTRFS_CACHE_ERROR. Again the result is the same, we fail to allocate
our space and return -ENOSPC. Instead we need to set
cache_block_group_error to -EIO in this case to make sure that if we do
not make our allocation we get the appropriate error returned back to
the caller.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ebcd021c9 upstream.
[BUG]
Syzbot reported a crash that an ASSERT() got triggered inside
prepare_to_merge().
That ASSERT() makes sure the reloc tree is properly pointed back by its
subvolume tree.
[CAUSE]
After more debugging output, it turns out we had an invalid reloc tree:
BTRFS error (device loop1): reloc tree mismatch, root 8 has no reloc root, expect reloc root key (-8, 132, 8) gen 17
Note the above root key is (TREE_RELOC_OBJECTID, ROOT_ITEM,
QUOTA_TREE_OBJECTID), meaning it's a reloc tree for quota tree.
But reloc trees can only exist for subvolumes, as for non-subvolume
trees, we just COW the involved tree block, no need to create a reloc
tree since those tree blocks won't be shared with other trees.
Only subvolumes tree can share tree blocks with other trees (thus they
have BTRFS_ROOT_SHAREABLE flag).
Thus this new debug output proves my previous assumption that corrupted
on-disk data can trigger that ASSERT().
[FIX]
Besides the dedicated fix and the graceful exit, also let tree-checker to
check such root keys, to make sure reloc trees can only exist for subvolumes.
CC: stable@vger.kernel.org # 5.15+
Reported-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
