Internal touchscreen on Trogdor Pompom (AKA Dynabook Chromebook C1)
supports USI stylus. Unfortunately the HID descriptor for the stylus
interface does not contain "Stylus" physical collection, which makes
the kernel to try and pull battery information, resulting in errors.
Apply HID_BATTERY_QUIRK_AVOID_QUERY to the device.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add device ID of Arrow Lake-S into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The xf86-input-wacom driver does not treat '0' as a valid serial
number and will drop any input report which contains an
MSC_SERIAL = 0 event. The kernel driver already takes care to
avoid sending any MSC_SERIAL event if the value of serial[0] == 0
(which is the case for devices that don't actually report a
serial number), but this is not quite sufficient.
Only the lower 32 bits of the serial get reported to userspace,
so if this portion of the serial is zero then there can still
be problems.
This commit allows the driver to report either the lower 32 bits
if they are non-zero or the upper 32 bits otherwise.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: stable@vger.kernel.org # v4.10
Signed-off-by: Jiri Kosina <jkosina@suse.com>
After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.
This is caused by commit f645a90e8f ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.
But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.
To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.
Fixes: f645a90e8f ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for the pointing stick (Accupoint) and 2 mouse buttons.
Present on some Toshiba/dynabook Portege X30 and X40 laptops.
It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
If a input device is opened before hid_hw_start is called, events may
not be received from the hardware. In the case of USB-backed devices,
for example, the hid_hw_start function is responsible for filling in
the URB which is submitted when the input device is opened. If a device
is opened prematurely, polling will never start because the device will
not have been in the correct state to send the URB.
Because the wacom driver registers its input devices before calling
hid_hw_start, there is a window of time where a device can be opened
and end up in an inoperable state. Some ARM-based Chromebooks in particular
reliably trigger this bug.
This commit splits the wacom_register_inputs function into two pieces.
One which is responsible for setting up the allocated inputs (and runs
prior to hid_hw_start so that devices are ready for any input events
they may end up receiving) and another which only registers the devices
(and runs after hid_hw_start to ensure devices can be immediately opened
without issue). Note that the functions to initialize the LEDs and remotes
are also moved after hid_hw_start to maintain their own dependency chains.
Fixes: 7704ac9373 ("HID: wacom: implement generic HID handling for pen generic devices")
Cc: stable@vger.kernel.org # v3.18+
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Since commit 680ee411a9 ("HID: logitech-hidpp: Fix connect event race")
the following messages appear in the kernel log from time to time:
logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:4051.0006: Disconnected
logitech-hidpp-device 0003:046D:408A.0005: Disconnected
As discussed, print the first per-device "device connected" message
at info level, demoting subsequent messages to debug level. Also,
demote the "Disconnected message" to debug level unconditionally.
Link: https://lore.kernel.org/lkml/3277085.44csPzL39Z@natalenko.name/
Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Follow the docs at Documentation/bpf/kfuncs.rst:
- declare the function with `__bpf_kfunc`
- disables missing prototype warnings, which allows to remove them from
include/linux/hid-bpf.h
Removing the prototypes is not an issue because we currently have to
redeclare them when writing the BPF program. They will eventually be
generated by bpftool directly AFAIU.
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Turns out that I got my reference counts wrong and each successful
bus_find_device() actually calls get_device(), and we need to manually
call put_device().
Ensure each bus_find_device() gets a matching put_device() when releasing
the bpf programs and fix all the error paths.
Cc: <stable@vger.kernel.org>
Fixes: f5c27da4e3 ("HID: initial BPF implementation")
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-2-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
When the kfunc hid_bpf_attach_prog() is called, we called twice fdget():
one for fetching the type of the bpf program, and one for actually
attaching the program to the device.
The problem is that between those two calls, we have no guarantees that
the prog_fd is still the same file descriptor for the given program.
Solve this by calling bpf_prog_get() earlier, and use this to fetch the
program type.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/bpf/CAO-hwJJ8vh8JD3-P43L-_CLNmPx0hWj44aom0O838vfP4=_1CA@mail.gmail.com/T/#t
Cc: <stable@vger.kernel.org>
Fixes: f5c27da4e3 ("HID: initial BPF implementation")
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-1-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
A while back the I2C HID implementation was split in an ACPI and OF
part, but the new OF driver never initialises the client pointer which
is dereferenced on power-up failures.
Fixes: b33752c300 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
Cc: stable@vger.kernel.org # 5.12
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
'struct hidraw_list' is a circular queue whose head can be smaller than
tail. Using 'list->tail != list->head' to release all memory that should
be released.
Fixes: a5623a203c ("HID: hidraw: fix memory leak in hidraw_release()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There's a Cirque touchpad that wakes system up without anything touched
the touchpad. The input report is empty when this happens.
The reason is stated in HID over I2C spec, 7.2.8.2:
"If the DEVICE wishes to wake the HOST from its low power state, it can
issue a wake by asserting the interrupt."
This is fine if OS can put system back to suspend by identifying input
wakeup count stays the same on resume, like Chrome OS Dark Resume [0].
But for regular distro such policy is lacking.
Though the change doesn't bring any impact on power consumption for
touchpad is minimal, other i2c-hid device may depends on SLEEP control
power. So use a quirk to limit the change scope.
[0] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/power_manager/docs/dark_resume.md
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
[jkosina@suse.com: tweak changelog a bit]
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Let logitech-hidpp driver claim Logitech G Pro X Superlight 2.
Reported-by: Marcus Rückert <darix@opensu.se>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There are a number of issues in this code. First of all if
steam_create_client_hid() fails then it leads to an error pointer
dereference when we call hid_destroy_device(steam->client_hdev).
Also there are a number of leaks. hid_hw_stop() is not called if
hid_hw_open() fails for example. And it doesn't call steam_unregister()
or hid_hw_close().
Fixes: 691ead124a ("HID: hid-steam: Clean up locking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/1fd87904-dabf-4879-bb89-72d13ebfc91e@moroto.mountain
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This error message doesn't really add any information. If modprobe
fails then the user will already know what the error code is. In the
case of kmalloc() it's a style violation to print an error message for
that because kmalloc has it's own better error messages built in.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/305898fb-6bd4-4749-806c-05ec51bbeb80@moroto.mountain
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3SCb
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaEregAKCRD3ErUQojoP
X0c9AP0ZdpE1zWFdjYg7ucKhNGrMfXWS8auvkC0qdd9Q0psnmQD/Z22JIl/fpgrk
0T74KAEd7MwMXGIUm5VKMe/AZJtaBgs=
=/sky
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
fbdev driver is for an Intel product which was never shipped, and for
the intelfb and the amba-clcd drivers the drm drivers can be used
instead.
The other code changes are minor: some fb_deferred_io flushing fixes,
imxfb margin fixes and stifb cleanups.
Summary:
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)"
* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
fbdev/intelfb: Remove driver
fbdev/hyperv_fb: Do not clear global screen_info
firmware/sysfb: Clear screen_info state after consuming it
fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
drm/hyperv: Remove firmware framebuffers with aperture helper
fbdev/sis: Remove dependency on screen_info
video/logo: use %u format specifier for unsigned int values
video/sticore: Remove info field from STI struct
arch/parisc: Detect primary video device from device instance
fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
video/sticore: Store ROM device in STI struct
fbdev: flush deferred IO before closing
fbdev: flush deferred work in fb_deferred_io_fsync()
fbdev: amba-clcd: Delete the old CLCD driver
fbdev: Remove support for Carillo Ranch driver
fbdev: hgafb: fix kernel-doc comments
fbdev: mmp: Fix typo and wording in code comment
fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
fbdev: imxfb: add '*/' on a separate line in block comment
fbdev: imxfb: use __func__ for function name
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmWhMN0ACgkQCF8+vY7k
4RUNmw/9FNwS6woEDPUgoaqBqES5N1R/QzqqWgALQSiywUSWsAnHuALR7Aio4oH4
IMRrXn3nQpg1wj+f2OtVcXreuf1OMdD0WmQvcj/hcjGIx3mZUh2dBXJpR/iRrCRA
jbGUDZqsiT9gPf6IcqspFccoShVjQDM7NKLa6xQMpwyITBAXhY0d5LPOs70VJO3f
EH6wdJbhbQoocylSFCOl61un4Ebk/Zou2TDyzAAnIMQxmanVTWnRE9QL6G59t8PA
XgTcSRiyQGdNScR8c/xgyHDj4KchvkwFHQfOAH+HPot6CIy+UsC02ofcBralTuN6
HTiJ8upj9U/N2ArX7L9w4xOFaRlXSO4MBTbQsroCgl7vkSfjMx/Ik5gHNVSoP25y
MdLVg9ReW6D22tWnHvqpwbv4YPjT1uFX9LzuNtINwjJVC5Hn7EMPiE7hdsBGdKZE
98dVJKNMUHQT5KfEUqjDkdrcAYm5Pd46trEa1aMDnoxtshxlmwHYwUj0QNKVX2gT
Wa5lw9twFvmvYPGFwIT11HrkFukj4zR7N7Eh0IOK93zjJl6gtr1UNmujj8KFXJS3
ZB4yTlcSgFunsmkyfcZ+02bgM9fq7SC1/rL9bXBYxdo2EcuduJ93Gr5riaQtVu44
6t6Gi8Ucf9Uh7B68Alf0GQAd+AhXPzbqtisHdYJb0ijGjRMhq7w=
=KPPn
-----END PGP SIGNATURE-----
Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
- updates to deprecated and changed interfaces
- use new cleanup.h features
- use new ida interface
- kdoc fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCZZ+J/RQcaXJhLndlaW55
QGludGVsLmNvbQAKCRCebuN7TNx1MZmlAQCsMW7RVGfdWw/xAPO+oBnK9k5w5YoY
1sU6p6KqZJMujAD9EQlCdzrEyuVci4rlX/Alvw0q6XWGHFF9XWl6IsYgJgM=
=YpQ9
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"A mix of bug fixes and updates to interfaces used by nvdimm:
- Updates to interfaces include:
Use the new scope based management
Remove deprecated ida interfaces
Update to sysfs_emit()
- Fixup kdoc comments"
* tag 'libnvdimm-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Use sysfs_emit() for all attributes
nvdimm/namespace: fix kernel-doc for function params
nvdimm/dimm_devs: fix kernel-doc for function params
nvdimm/btt: fix btt_blk_cleanup() kernel-doc
nvdimm-btt: simplify code with the scope based resource management
nvdimm: Remove usage of the deprecated ida_simple_xx() API
ACPI: NFIT: Use cleanup.h helpers instead of devm_*()
- Don't force a retune before eMMC RPMB switch
- Add optional HS400 tuning in HS400es initialization
- Add a sysfs node to for write-protect-group-size
- Add re-tuning test to the mmc-test module
- Use mrq.sbc to support close-ended ioctl requests
MMC host:
- mmci: Add support for SDIO in-band irqs for the stm32 variant
- mmc_spi: Remove broken support custom DMA mapped buffers
- mtk-sd: Improve and extend the support for tunings
- renesas_sdhi: Document support for the RZ/Five variant
- sdhci_am654: Drop support for the ti,otap-del-sel DT property
- sdhci-brcmstb: Add support for the brcm 74165b0 variant
- sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
- sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
- sdhci-xenon: Add support for the Marvell ac5 variant
-----BEGIN PGP SIGNATURE-----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=+2YX
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Don't force a retune before eMMC RPMB switch
- Add optional HS400 tuning in HS400es initialization
- Add a sysfs node to for write-protect-group-size
- Add re-tuning test to the mmc-test module
- Use mrq.sbc to support close-ended ioctl requests
MMC host:
- mmci: Add support for SDIO in-band irqs for the stm32 variant
- mmc_spi: Remove broken support custom DMA mapped buffers
- mtk-sd: Improve and extend the support for tunings
- renesas_sdhi: Document support for the RZ/Five variant
- sdhci_am654: Drop support for the ti,otap-del-sel DT property
- sdhci-brcmstb: Add support for the brcm 74165b0 variant
- sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
- sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
- sdhci-xenon: Add support for the Marvell ac5 variant"
* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: xenon: Add ac5 support via bounce buffer
dt-bindings: mmc: add Marvell ac5
mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
mmc: core: Do not force a retune before RPMB switch
mmc: core: Add HS400 tuning in HS400es initialization
mmc: sdhci_omap: Fix TI SoC dependencies
mmc: sdhci_am654: Fix TI SoC dependencies
mmc: core: Add wp_grp_size sysfs node
mmc: mmc_test: Add re-tuning test
mmc: mmc_spi: remove custom DMA mapped buffers
dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
mmc: mtk-sd: Extend number of tuning steps
dt-bindings: mmc: mtk-sd: add tuning steps related property
mmc: sdhci-omap: don't misuse kernel-doc marker
mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
mmc: core: Use mrq.sbc in close-ended ffu
mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
...
- Move the generic PM domain and its governor to the pmdomain subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd
-----BEGIN PGP SIGNATURE-----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=xSMR
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Move the generic PM domain and its governor to the pmdomain
subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd"
* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Move genpd and its governor to the pmdomain subsystem
PM: domains: Drop redundant header for genpd
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
PM: domains: fix domain_governor kernel-doc warnings
pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
pmdomain: qcom-cpr: Convert to platform remove callback returning void
pmdomain: imx93-pd: Convert to platform remove callback returning void
pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx-gpcv2: Convert to platform remove callback returning void
pmdomain: imx-gpc: Convert to platform remove callback returning void
pmdomain: imx-pgc: Convert to platform remove callback returning void
pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
dt-bindings: power: meson-g12a-power: document ISP power domain
firmware: arm_scpi: Move power-domain driver to the pmdomain dir
pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
pmdomain: qcom: rpmhpd: Update part number to X1E80100
dt-bindings: power: rpmpd: Update part number to X1E80100
Small cycle, with some typical driver updates
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZaCQDQAKCRCFwuHvBreF
YemEAQCTGebv0k2hbocDOmKml5awt8j9aDJX3aO7Zpfi0AYUtwEAzk+kgN4yAo+B
Vinvpu171zry+QvmGJsXv2mtZkXH6QY=
=HT3p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Small cycle, with some typical driver updates:
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and
bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast
list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()
RDMA/efa: Add EFA query MR support
IB/iser: Prevent invalidating wrong MR
RDMA/erdma: Add hardware statistics support
RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests
IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos
RDMA/mana_ib: Add CQ interrupt support for RAW QP
RDMA/mana_ib: query device capabilities
RDMA/mana_ib: register RDMA device with GDMA
RDMA/bnxt_re: Fix the sparse warnings
RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications
RDMA/bnxt_re: Share a page to expose per CQ info with userspace
RDMA/bnxt_re: Add UAPI to share a page with user space
IB/ipoib: Fix mcast list locking
RDMA/mlx5: Expose register c0 for RDMA device
net/mlx5: E-Switch, expose eswitch manager vport
net/mlx5: Manage ICM type of SW encap
RDMA/mlx5: Support handling of SW encap ICM area
net/mlx5: Introduce indirect-sw-encap ICM properties
RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters
...
This update includes the series of changes related to device attributes,
as well as slight code refactoring.
Some old devices are recognized to have legacy layout of configuration ROM.
They have an inconvenience that FireWire subsystem adds no attributes for
vendor information to corresponding devices. The main purpose of this
update is to rectify the inconvenience.
We have a slight concern about regression. The update changes the value of
modalias for the unit devices by populating its model field, which was
previously left as zero in the case. I've assessed the potential impact of
this change and anticipate it to have minimal concern for both the kernel
and user lands. The change is enough acceptable.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZZ57GAAKCRCsLtaWM8Lw
EwPxAP41CGFkA3nDew4v6DDdKbudx7+JaTSZcinqssnu5SYmoQD8DERryjpTCeLH
pCz0xVjPcmPMI6dXb4vkZCVL2gZzcgU=
=5cnb
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This includes the series of changes related to device attributes, as
well as slight code refactoring.
Some old devices are recognized to have legacy layout of configuration
ROM. They have an inconvenience that FireWire subsystem adds no
attributes for vendor information to corresponding devices. The main
purpose of this update is to rectify the inconvenience.
We have a slight concern about regression. The update changes the
value of modalias for the unit devices by populating its model field,
which was previously left as zero in the case. I've assessed the
potential impact of this change and anticipate it to have minimal
concern for both the kernel and user lands. The change is enough
acceptable"
* tag 'firewire-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fill model field in modalias of unit device for legacy layout of configuration ROM
firewire: core: detect model name for legacy layout of configuration ROM
firewire: core: detect numeric model identifier for legacy layout of configuration ROM
firewire: test: add test of device attributes for legacy AV/C device
firewire: test: add test of device attributes for simple AV/C device
firewire: test: add KUnit test for device attributes
firewire: core: replace magic number with macro
firewire: core: adds constant qualifier for local helper functions
firewire: make fw_bus_type const
Here are the GNSS updates for 6.8-rc1, including:
- support for the reset pin found on some u-blox receivers
- use new regulator helper for the u-blox backup supply
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZZ5lKAAKCRALxc3C7H1l
CJf5AQDGPYXweNwmKYhI5OE5vplTdRDYxKE8of+BOvdDrRmk/wEAr7yAipKER6Ms
/DZUhUGwZB7D09iUXm3XDAF8NZlj3ww=
=sTWS
-----END PGP SIGNATURE-----
Merge tag 'gnss-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss
Pull GNSS updates from Johan Hovold:
- support for the reset pin found on some u-blox receivers
- use new regulator helper for the u-blox backup supply
* tag 'gnss-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
gnss: ubx: add support for the reset gpio
dt-bindings: gnss: u-blox: add "reset-gpios" binding
gnss: ubx: use new helper to remove open coded regulator handling
SM8650 based on the diffstat. Otherwise this is a collection of non-critical
fixes and cleanups to various clk drivers and their DT bindings. Nothing is
changed in the core clk framework this time, although there's a patch to fix a
basic clk type initialization function. In general, this pile looks to be on
the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling separate
memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and
QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers
-----BEGIN PGP SIGNATURE-----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=t0CI
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
Core GPIOLIB:
- protect the global list of GPIO devices with a read-write semaphore as
it is rarely modified but can be traversed by multiple readers at once
- remove GPIO devices from the global list when they are *unregistered*
and not when they are *released* (which only happens when the last
reference is dropped) as this may lead to a successful lookup of an
unregistered device
- remove the unnecessary "extra_checks" switch
- rename functions that are called with a lock taken
- remove duplicate includes
Character device handling:
- use locking guards to reduce the code size
- allocate the big linereq structure using the more suitable kvzalloc()
- redulce the size of critical sections
- improve documentation
- move the debounce_period_us field out of struct gpio_desc
New drivers:
- Nuvoton NPCM SGPIO driver for BMC NPCM7xx/NPCM8xx
- Realtek DHC (Digital Home Center) SoC GPIO driver
Driver improvements:
- replace gpiochip_is_requested() with a safer alternative in the form of
gpiochip_dup_line_label() as the former returns a pointer to a string that
can be deleted
- implement the dbg_show() callback in gpio-sim
- improve the coding style for local variables by removing unnecessary tabs
- use generic device properties instead of OF variants in gpio-mmio
- use the preferred coding style for __free() in gpio-mockup
- reuse PM ops from the gpio-tangier in gpio-elkhartlake
- rework PM and use cleanup helpers in gpio-tangier
- fix the EIC configuration in gpio-pmic-eic-sprd
- remove the unneeded call to platform_set_drvdata() in gpio-sifive
- use generic GPIO helpers for driver callbacks in gpio-dwapb
- add clock support on certain pins of gpio-ixp4xx
- don't use the core-specific DEBUG_GPIO switch in drivers
- kerneldoc improvements
DT bindings:
- add bindings for the new Realtek and Nuvoton devices
- allow gpio-ranges in gpio-dwapb
- support GPIO hogs in gpio-rockchip
- describe the label property in gpio-zynqmp-modepin
Other:
- header cleanups
- forward declarations cleanups
-----BEGIN PGP SIGNATURE-----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=bcXn
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, an assortment of updates and cleanups to many
others, and first part of the big rework of the core GPIOLIB that's
currently underway.
Add to that some code shrink in the character device module and
updates to DT bindings and that's pretty much it.
Core GPIOLIB:
- protect the global list of GPIO devices with a read-write semaphore
as it is rarely modified but can be traversed by multiple readers
at once
- remove GPIO devices from the global list when they are
*unregistered* and not when they are *released* (which only happens
when the last reference is dropped) as this may lead to a
successful lookup of an unregistered device
- remove the unnecessary "extra_checks" switch
- rename functions that are called with a lock taken
- remove duplicate includes
Character device handling:
- use locking guards to reduce the code size
- allocate the big linereq structure using the more suitable
kvzalloc()
- redulce the size of critical sections
- improve documentation
- move the debounce_period_us field out of struct gpio_desc
New drivers:
- Nuvoton NPCM SGPIO driver for BMC NPCM7xx/NPCM8xx
- Realtek DHC (Digital Home Center) SoC GPIO driver
Driver improvements:
- replace gpiochip_is_requested() with a safer alternative in the
form of gpiochip_dup_line_label() as the former returns a pointer
to a string that can be deleted
- implement the dbg_show() callback in gpio-sim
- improve the coding style for local variables by removing
unnecessary tabs
- use generic device properties instead of OF variants in gpio-mmio
- use the preferred coding style for __free() in gpio-mockup
- reuse PM ops from the gpio-tangier in gpio-elkhartlake
- rework PM and use cleanup helpers in gpio-tangier
- fix the EIC configuration in gpio-pmic-eic-sprd
- remove the unneeded call to platform_set_drvdata() in gpio-sifive
- use generic GPIO helpers for driver callbacks in gpio-dwapb
- add clock support on certain pins of gpio-ixp4xx
- don't use the core-specific DEBUG_GPIO switch in drivers
- kerneldoc improvements
DT bindings:
- add bindings for the new Realtek and Nuvoton devices
- allow gpio-ranges in gpio-dwapb
- support GPIO hogs in gpio-rockchip
- describe the label property in gpio-zynqmp-modepin
Other:
- header cleanups
- forward declarations cleanups"
* tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpiolib: replace the GPIO device mutex with a read-write semaphore
gpiolib: remove the GPIO device from the list when it's unregistered
gpio: nuvoton: Add Nuvoton NPCM sgpio driver
dt-bindings: gpio: add NPCM sgpio driver bindings
gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCs
dt-bindings: gpio: realtek: Add realtek,rtd-gpio
gpio: pmic-eic-sprd: Configure the bit corresponding to the EIC through offset
gpio: dwapb: Use generic request, free and set_config
gpio: sysfs: drop tabs from local variable declarations
gpiolib: drop tabs from local variable declarations
gpiolib: remove extra_checks
gpio: tps65219: don't use CONFIG_DEBUG_GPIO
gpiolib: cdev: replace locking wrappers for gpio_device with guards
gpiolib: cdev: replace locking wrappers for config_mutex with guards
gpiolib: cdev: allocate linereq using kvzalloc()
gpiolib: cdev: include overflow.h
gpiolib: cdev: reduce locking in gpio_desc_to_lineinfo()
gpiolib: cdev: improve documentation of get/set values
gpiolib: cdev: fully adopt guard() and scoped_guard()
gpiolib: remove debounce_period_us from struct gpio_desc
...
- New drivers
* pmbus: Support for MPS Multi-phase mp2856/mp2857 controller
* pmbus: Support for MPS Multi-phase mp5990
* Driver for Gigabyte AORUS Waterforce AIO coolers
0c459759ca hwmon: (pmbus) Add ltc4286 driver
- Added support to existing drivers
* lm75: Support for AMS AS6200 temperature sensor
* k10temp: Support for AMD Family 19h Model 8h
* max31827: Support for max31828 and max31829
* sht3x: Support for sts3x
* Add support for WMI SMM interface, and various related improvements.
Add support for Optiplex 7000
* emc1403: Support for EMC1442
* npcm750-pwm-fan: Support for NPCM8xx
* nct6775: Add support for 2 additional fan controls
- Minor improvements and bug fixes
* gigabyte_waterforce: Mark status report as received under a spinlock
* aquacomputer_d5next: Remove unneeded CONFIG_DEBUG_FS #ifdef
* gpio-fan: Convert txt bindings to yaml
* smsc47m1: Various cleanups / improvements
* corsair-cpro: use NULL instead of 0
* hp-wmi-sensors: Fix failure to load on EliteDesk 800 G6
* tmp513: Various cleanups
* peci/dimmtemp: Bump timeout
* pc87360: Bounds check data->innr usage
* nct6775: Fix fan speed set failure in automatic mode
* ABI: sysfs-class-hwmon: document various missing attributes
* lm25066: Use i2c_get_match_data()
* nct6775: Use i2c_get_match_data(), and related fixes
* max6650: Use i2c_get_match_data()
* aspeed-pwm-tacho: Fix -Wstringop-overflow warning in aspeed_create_fan_tach_channel()
-----BEGIN PGP SIGNATURE-----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=TZuo
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- pmbus: Support for MPS Multi-phase mp2856/mp2857 controller
- pmbus: Support for MPS Multi-phase mp5990
- Driver for Gigabyte AORUS Waterforce AIO coolers
Added support to existing drivers:
- lm75: Support for AMS AS6200 temperature sensor
- k10temp: Support for AMD Family 19h Model 8h
- max31827: Support for max31828 and max31829
- sht3x: Support for sts3x
- Add support for WMI SMM interface, and various related improvements.
Add support for Optiplex 7000
- emc1403: Support for EMC1442
- npcm750-pwm-fan: Support for NPCM8xx
- nct6775: Add support for 2 additional fan controls
Minor improvements and bug fixes:
- gigabyte_waterforce: Mark status report as received under a spinlock
- aquacomputer_d5next: Remove unneeded CONFIG_DEBUG_FS #ifdef
- gpio-fan: Convert txt bindings to yaml
- smsc47m1: Various cleanups / improvements
- corsair-cpro: use NULL instead of 0
- hp-wmi-sensors: Fix failure to load on EliteDesk 800 G6
- tmp513: Various cleanups
- peci/dimmtemp: Bump timeout
- pc87360: Bounds check data->innr usage
- nct6775: Fix fan speed set failure in automatic mode
- ABI: sysfs-class-hwmon: document various missing attributes
- lm25066, max6650, nct6775: Use i2c_get_match_data()
- aspeed-pwm-tacho: Fix -Wstringop-overflow warning"
* tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (59 commits)
hwmon: (gigabyte_waterforce) Mark status report as received under a spinlock
hwmon: (lm75) Fix tmp112 default config
hwmon: (lm75) Add AMS AS6200 temperature sensor
dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
hwmon: (lm75) remove now-unused include
hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controller
dt-bindings: Add MP2856/MP2857 voltage regulator device
hwmon: (aquacomputer_d5next) Remove unneeded CONFIG_DEBUG_FS #ifdef
dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml
hwmon: (k10temp) Add support for AMD Family 19h Model 8h
hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers
hwmon: (smsc47m1) Rename global platform device variable
hwmon: (smsc47m1) Simplify device registration
hwmon: (smsc47m1) Convert to platform remove callback returning void
hwmon: (smsc47m1) Mark driver struct with __refdata to prevent section mismatch
MAINTAINERS: Add maintainer for Baikal-T1 PVT hwmon driver
hwmon: (sht3x) add sts3x support
hwmon: (pmbus) Add ltc4286 driver
dt-bindings: hwmon: Add lltc ltc4286 driver bindings
hwmon: (max31827) Add custom attribute for resolution
...
It was a clam development cycle. There were an ALSA core extension
for subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4.
Also supports for ACPI parse for the ES83xx driver that reduces
quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes
-----BEGIN PGP SIGNATURE-----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=yVxc
-----END PGP SIGNATURE-----
Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name
-----BEGIN PGP SIGNATURE-----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=nuw0
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
From looking at the PCI IDs, every device supported by intelfb is
also supported by i915. Anyone still using intelfb should please
move on to i915, which does everything intelfb does but better.
Removing intelfb is motivated by the driver's excessive use of the
global screen_info state. The state belongs to architecture and
firmware code; device drivers should not attempt to access it. But
fixing intelfb would require a significant change in the driver's
probing logic. As intelfb has been obsolete for nearly 2 decades,
it is probably not worth the effort. Let's just remove it. Also
remove the related documentation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maik Broemme <mbroemme@libmpq.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Do not clear the global instance of screen_info. If necessary, clearing
fields in screen_info should be done by architecture or firmware code
that maintains the firmware framebuffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
After consuming the global screen_info_state in sysfb_init(), the
created platform device maintains the firmware framebuffer. Clear
screen_info to avoid conflicting access. Subsequent kexec reboots
now ignore the firmware framebuffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace use of screen_info state with the correct interfaces from
the aperture helpers. The state is only for architecture and firmware
code. It is not guaranteed to contain valid data. Drivers are thus
not allowed to use it.
For removing conflicting firmware framebuffers, there are aperture
helpers. Hence replace screen_info with the correct functions that will
remove conflicting framebuffers for the hypervfb driver. For GEN1 PCI
devices, the driver reads the framebuffer base and size from the PCI
BAR, and uses the range for removing the firmware framebuffer. For
GEN2 VMBUS devices no range can be detected, so the driver clears all
firmware framebuffers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace use of screen_info state with the correct interface from
the aperture helpers. The state is only for architecture and firmware
code. It is not guaranteed to contain valid data. Drivers are thus
not allowed to use it.
For removing conflicting firmware framebuffers, there are aperture
helpers. Hence replace screen_info with the correct function that will
remove conflicting framebuffers for the hyperv-drm driver. Also
move the call to the correct place within the driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
When built-in, the sis driver tries to detect the current display mode
from the global screen_info state. That state is only for architecture
and firmware code. Drivers should not use it directly as it's not
guaranteed to contain valid information.
Remove the mode-detection code from sis. Drivers that want to detect a
pre-set mode on probe should read the hardware registers directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Currently the %d format specifier is being used for unsigned int values.
Fix this by using the correct %u format specifier. Cleans up cppcheck
warnings:
warning: %d in format string (no. 1) requires 'int' but the argument
type is 'unsigned int'. [invalidPrintfArgType_sint]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The info field in struct sti_struct was used to detect the default
display device. That test is now done with the respective Linux device
and the info field is unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Update fb_is_primary device() on parisc to detect the primary display
device from the Linux device instance. Aligns the code with the other
architectures. A later patch will remove the fbdev dependency from the
function's interface.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Allocate stifb's instance of fb_info with framebuffer_alloc(). This
is the preferred way of creating fb_info with associated driver data
stored in struct fb_info.par. Requires several, but minor, changes
through out the driver's code.
The intended side effect of this patch is that the new instance of
struct fb_info now has its device field correctly set to the parent
device of the STI ROM. A later patch can detect if the device is the
firmware's primary output. It is also now correctly located within
the Linux device hierarchy.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Store the ROM's parent device in each STI struct, so we can associate
the STI framebuffer with a device.
The new field will eventually replace the fbdev subsystem's info field,
which the function fb_is_primary_device() currently requires to detect
the firmware's output. By using the device instead of the framebuffer
info, a later patch can generalize the helper for use in non-fbdev code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
When framebuffer gets closed, the queued deferred IO gets cancelled. This
can cause some last display data to vanish. This is problematic for users
who send a still image to the framebuffer, then close the file: the image
may never appear.
To ensure none of display data get lost, flush the queued deferred IO
first before closing.
Another possible solution is to delete the cancel_delayed_work_sync()
instead. The difference is that the display may appear some time after
closing. However, the clearing of page mapping after this needs to be
removed too, because the page mapping is used by the deferred work. It is
not completely obvious whether it is okay to not clear the page mapping.
For a patch intended for stable trees, go with the simple and obvious
solution.
Fixes: 60b59beafb ("fbdev: mm: Deferred IO support")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The driver's fsync() is supposed to flush any pending operation to
hardware. It is implemented in this driver by cancelling the queued
deferred IO first, then schedule it for "immediate execution" by calling
schedule_delayed_work() again with delay=0. However, setting delay=0
only means the work is scheduled immediately, it does not mean the work
is executed immediately. There is no guarantee that the work is finished
after schedule_delayed_work() returns. After this driver's fsync()
returns, there can still be pending work. Furthermore, if close() is
called by users immediately after fsync(), the pending work gets
cancelled and fsync() may do nothing.
To ensure that the deferred IO completes, use flush_delayed_work()
instead. Write operations to this driver either write to the device
directly, or invoke schedule_delayed_work(); so by flushing the
workqueue, it can be guaranteed that all previous writes make it to the
device.
Fixes: 5e841b88d2 ("fb: fsync() method for deferred I/O flush.")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
We have managed to ascertain that all users of the old FBDEV
code that are out of tree are now gone.
The new DRM driver can be found in drivers/gpu/drm/pl111/.
The remaining out of tree user was the ARM FVP emulation
platform, running Android. Thanks to changes in Android
versions 13 and 14, Android can now use the DRM driver when
being emulated under FVP. Some final patches are being put
in place to make it fully featured.
This is essentially a revert of the partial revert in
commit 112c35237c ("Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver"")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
As far as anybody can tell, this product never shipped. If it did,
it shipped in 2007 and nobody has access to one any more. Remove the
fbdev driver and the backlight driver.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>
In this series, we've some progress to support Zoned block device regarding to
the power-cut recovery flow and enabling checkpoint=disable feature which is
essential for Android OTA. Other than that, some patches touched sysfs entries
and tracepoints which are minor, while several bug fixes on error handlers and
compression flows are good to improve the overall stability.
Enhancement:
- enable checkpoint=disable for zoned block device
- sysfs entries such as discard status, discard_io_aware, dir_level
- tracepoints such as f2fs_vm_page_mkwrite(), f2fs_rename(), f2fs_new_inode()
- use shared inode lock during f2fs_fiemap() and f2fs_seek_block()
Bug fix:
- address some power-cut recovery issues on zoned block device
- handle errors and logics on do_garbage_collect(), f2fs_reserve_new_block(),
f2fs_move_file_range(), f2fs_recover_xattr_data()
- don't set FI_PREALLOCATED_ALL for partial write
- fix to update iostat correctly in f2fs_filemap_fault()
- fix to wait on block writeback for post_read case
- fix to tag gcing flag on page during block migration
- restrict max filesize for 16K f2fs
- fix to avoid dirent corruption
- explicitly null-terminate the xattr list
There are also several clean-up patches to remove dead codes and better
readability.
-----BEGIN PGP SIGNATURE-----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=MQl3
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs update from Jaegeuk Kim:
"In this series, we've some progress to support Zoned block device
regarding to the power-cut recovery flow and enabling
checkpoint=disable feature which is essential for Android OTA.
Other than that, some patches touched sysfs entries and tracepoints
which are minor, while several bug fixes on error handlers and
compression flows are good to improve the overall stability.
Enhancements:
- enable checkpoint=disable for zoned block device
- sysfs entries such as discard status, discard_io_aware, dir_level
- tracepoints such as f2fs_vm_page_mkwrite(), f2fs_rename(),
f2fs_new_inode()
- use shared inode lock during f2fs_fiemap() and f2fs_seek_block()
Bug fixes:
- address some power-cut recovery issues on zoned block device
- handle errors and logics on do_garbage_collect(),
f2fs_reserve_new_block(), f2fs_move_file_range(),
f2fs_recover_xattr_data()
- don't set FI_PREALLOCATED_ALL for partial write
- fix to update iostat correctly in f2fs_filemap_fault()
- fix to wait on block writeback for post_read case
- fix to tag gcing flag on page during block migration
- restrict max filesize for 16K f2fs
- fix to avoid dirent corruption
- explicitly null-terminate the xattr list
There are also several clean-up patches to remove dead codes and
better readability"
* tag 'f2fs-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (33 commits)
f2fs: show more discard status by sysfs
f2fs: Add error handling for negative returns from do_garbage_collect
f2fs: Constrain the modification range of dir_level in the sysfs
f2fs: Use wait_event_freezable_timeout() for freezable kthread
f2fs: fix to check return value of f2fs_recover_xattr_data
f2fs: don't set FI_PREALLOCATED_ALL for partial write
f2fs: fix to update iostat correctly in f2fs_filemap_fault()
f2fs: fix to check compress file in f2fs_move_file_range()
f2fs: fix to wait on block writeback for post_read case
f2fs: fix to tag gcing flag on page during block migration
f2fs: add tracepoint for f2fs_vm_page_mkwrite()
f2fs: introduce f2fs_invalidate_internal_cache() for cleanup
f2fs: update blkaddr in __set_data_blkaddr() for cleanup
f2fs: introduce get_dnode_addr() to clean up codes
f2fs: delete obsolete FI_DROP_CACHE
f2fs: delete obsolete FI_FIRST_BLOCK_WRITTEN
f2fs: Restrict max filesize for 16K f2fs
f2fs: let's finish or reset zones all the time
f2fs: check write pointers when checkpoint=disable
f2fs: fix write pointers on zoned device after roll forward
...
-----BEGIN PGP SIGNATURE-----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=UhAE
-----END PGP SIGNATURE-----
Merge tag '6.8-rc-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
- memory allocation fix
- three lease fixes, including important rename fix
- read only share fix
- thread freeze fix
- three cleanup fixes (two kernel doc related)
- locking fix in setting EAs
- packet header validation fix
* tag '6.8-rc-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Add missing set_freezable() for freezable kthread
ksmbd: free ppace array on error in parse_dacl
ksmbd: send lease break notification on FILE_RENAME_INFORMATION
ksmbd: don't allow O_TRUNC open on read-only share
ksmbd: vfs: fix all kernel-doc warnings
ksmbd: auth: fix most kernel-doc warnings
ksmbd: Remove usage of the deprecated ida_simple_xx() API
ksmbd: don't increment epoch if current state and request state are same
ksmbd: fix potential circular locking issue in smb2_set_ea()
ksmbd: set v2 lease version on lease upgrade
ksmbd: validate the zero field of packet header
