Initial support for the Mellanox SwitchIB and SwitchIB-2 ASICs was added
in October 2016, but since then development of this driver stopped.
Therefore, the driver does not support any offloads and simply registers
devlink ports for its front panel ports, rendering it irrelevant for
deployment.
Given the driver is not used by any users and that there is no intention
of investing in its development, remove it from the kernel.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly set the error code to zero before the goto statement to avoid
the following smatch warning:
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3598 mlxsw_sp_nexthop_group_refresh() warn: missing error code 'err'
The warning is a false positive, but the change both suppresses the
warning and makes it clear to future readers that this is not an error
path.
The original report and discussion can be found here [1].
[1] https://lore.kernel.org/lkml/202105141823.Td2h3Mbi-lkp@intel.com/
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw_emad_transmit() takes care of sending EMAD transactions to the
device. Since these transactions can time out, the driver performs up to
5 retransmissions, each time copying the skb with the original request.
The data of the skb does not change throughout the process, so there is
no need to copy it each time. Instead, only the skb itself can be
copied. Therefore, use skb_clone() instead of skb_copy().
This reduces the latency of the function by about 16%.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are few cases in which an array index queried from a fw register,
is accessed without any validation that it doesn't exceed the array
length.
Add a proper length validation, so accessing memory past the end of an
array will be forbidden.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the call path:
mlxsw_sp_hdroom_bufs_reset_sizes()
mlxsw_sp_hdroom_int_buf_size_get()
->int_buf_size_get()
The 'speed' and 'mtu' arguments were mistakenly switched twice. The two
bugs thus canceled each other.
Clean this up by switching the arguments in both call sites, so that
they are passed in the right order.
Found during manual code inspection.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the two users of this helper have been converted to iproute2 dcb,
it is not necessary anymore. Drop it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a dedicated tool for configuration of DCB in iproute2 now. Use it
in the selftest instead of mlnx_qos.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a dedicated tool for configuration of DCB in iproute2 now. Use it
in the selftest instead of mlnx_qos.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test sometimes fails with an error message such as:
TEST: tc sample (w/ flower) rate (egress) [FAIL]
Expected 100 packets, got 70 packets, which is -30% off. Required accuracy is +-25%
Make the test more robust by generating more packets, therefore
increasing the number of expected samples. Decrease the transmission
delay in order not to needlessly prolong the test.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the array of the ports that were split in the port_scale test
is local, so the port_cleanup() unsplits an empty array.
Make the array global so the cleanup will be preformed properly.
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Shen says:
====================
Rid W=1 warnings in net
This is a set to fully clean drivers/net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:121: warning: expecting prototype for hns_mac_is_adjust_link(). Prototype was for hns_mac_need_adjust_link() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:386: warning: expecting prototype for hns_mac_queue_config_bc_en(). Prototype was for hns_mac_port_config_bc_en() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:607: warning: expecting prototype for hns_mac_set_autoneg(). Prototype was for hns_mac_set_pauseparam() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:236: warning: expecting prototype for hns_ppe_qid_cfg(). Prototype was for hns_dsaf_ppe_qid_cfg() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:623: warning: expecting prototype for dsaf_tbl_tcam_mcast_cfg(). Prototype was for hns_dsaf_tbl_tcam_mcast_cfg() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:1220: warning: expecting prototype for hns_dsaf_tbl_tcam_init(). Prototype was for hns_dsaf_comm_init() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2121: warning: expecting prototype for dsaf_pfc_unit_cnt(). Prototype was for hns_dsaf_pfc_unit_cnt() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2153: warning: expecting prototype for dsaf_port_work_rate_cfg(). Prototype was for hns_dsaf_port_work_rate_cfg() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2745: warning: expecting prototype for hns_dsaf_get_sset_count(). Prototype was for hns_dsaf_get_regs_count() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2957: warning: expecting prototype for dsaf_probe(). Prototype was for hns_dsaf_probe() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:3011: warning: expecting prototype for dsaf_remove(). Prototype was for hns_dsaf_remove() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:366: warning: expecting prototype for hns_dsaf_srst_chns(). Prototype was for hns_dsaf_srst_chns_acpi() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:509: warning: expecting prototype for hns_mac_get_sds_mode(). Prototype was for hns_mac_get_phy_if() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:303: warning: expecting prototype for ppe_init_hw(). Prototype was for hns_ppe_init_hw() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:350: warning: expecting prototype for ppe_uninit_hw(). Prototype was for hns_ppe_uninit_hw() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:391: warning: expecting prototype for hns_ppe_reset(). Prototype was for hns_ppe_reset_common() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:464: warning: expecting prototype for ppe_get_strings(). Prototype was for hns_ppe_get_strings() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c:920: warning: expecting prototype for rcb_get_sset_count(). Prototype was for hns_rcb_get_ring_regs_count() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c:112: warning: expecting prototype for hns_xgmac_tx_lf_rf_insert(). Prototype was for hns_xgmac_lf_rf_insert() instead
drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c:122: warning: expecting prototype for hns_xgmac__lf_rf_control_init(). Prototype was for hns_xgmac_lf_rf_control_init() instead
drivers/net/ethernet/hisilicon/hns/hns_enet.c:777: warning: expecting prototype for hns_nic_adp_coalesce(). Prototype was for hns_nic_adpt_coalesce() instead
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting prototype for hns_nic_set_link_settings(). Prototype was for hns_nic_set_link_ksettings() instead
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting prototype for get_ethtool_stats(). Prototype was for hns_get_ethtool_stats() instead
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning: expecting prototype for get_strings(). Prototype was for hns_get_strings() instead
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/phy/adin.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/net/phy/rockchip.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/via/via-velocity.c:1908: warning: expecting prototype for tx_srv(). Prototype was for velocity_tx_srv() instead
drivers/net/ethernet/via/via-velocity.c:2466: warning: expecting prototype for velocity_get_status(). Prototype was for velocity_get_stats() instead
drivers/net/ethernet/via/via-velocity.c:3734: warning: expecting prototype for velocity_cleanup(). Prototype was for velocity_cleanup_module() instead
Cc: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/ti/cpsw_ale.c:88: warning: expecting prototype for struct ale_dev_id. Prototype was for struct cpsw_ale_dev_id instead
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/socionext/sni_ave.c:28: warning: expecting prototype for sni_ave.c(). Prototype was for AVE_IDR() instead
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:797: warning: expecting prototype for sxgbe_tx_clean(). Prototype was for sxgbe_tx_all_clean() instead
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1026: warning: expecting prototype for sxgbe_init_tx_coalesce(). Prototype was for sxgbe_tx_init_coalesce() instead
Cc: Byungho An <bh74.an@samsung.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c:761: warning: expecting prototype for qlcnic_83xx_idc_cold_state(). Prototype was for qlcnic_83xx_idc_cold_state_handler() instead
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c:192: warning: expecting prototype for qlcnic_83xx_vnic_opmode(). Prototype was for qlcnic_83xx_config_vnic_opmode() instead
Cc: Shahed Shaikh <shshaikh@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/netronome/nfp/ccm_mbox.c:52: warning: expecting prototype for struct nfp_ccm_mbox_skb_cb. Prototype was for struct nfp_ccm_mbox_cmsg_cb instead
drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c:35: warning: expecting prototype for struct nfp_tun_pre_run_rule. Prototype was for struct nfp_tun_pre_tun_rule instead
drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c:38: warning: expecting prototype for NFFW_INFO_VERSION history(). Prototype was for NFFW_INFO_VERSION_CURRENT() instead
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/neterion/vxge/vxge-config.c:4895: warning: expecting prototype for vxge_hw_vpath_rx_doorbell_post(). Prototype was for vxge_hw_vpath_rx_doorbell_init() instead
drivers/net/ethernet/neterion/vxge/vxge-main.c:1814: warning: expecting prototype for vxge_poll(). Prototype was for vxge_poll_msix() instead
drivers/net/ethernet/neterion/vxge/vxge-main.c:4761: warning: expecting prototype for vxge_rem_nic(). Prototype was for vxge_remove() instead
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/neterion/s2io.c:2759: warning: expecting prototype for s2io_poll(). Prototype was for s2io_poll_msix() instead
drivers/net/ethernet/neterion/s2io.c:5304: warning: expecting prototype for s2io_ethtol_get_link_ksettings(). Prototype was for s2io_ethtool_get_link_ksettings() instead
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/microchip/encx24j600.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/micrel/ksz884x.c:2163: warning: expecting prototype for sw_get_board_storm(). Prototype was for sw_get_broad_storm() instead
drivers/net/ethernet/micrel/ksz884x.c:2985: warning: expecting prototype for port_w_phy(). Prototype was for hw_w_phy() instead
drivers/net/ethernet/micrel/ksz884x.c:4792: warning: expecting prototype for transmit_done(). Prototype was for tx_done() instead
Cc: Tristram Ha <Tristram.Ha@micrel.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c:604: warning: expecting prototype for cmdq_arm_ceq_handler(). Prototype was for cmdq_sync_cmd_handler() instead
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:59: warning: expecting prototype for get_capability(). Prototype was for parse_capability() instead
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:101: warning: expecting prototype for get_cap_from_fw(). Prototype was for get_capability() instead
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:355: warning: expecting prototype for clear_io_resource(). Prototype was for clear_io_resources() instead
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:1100: warning: expecting prototype for hinic_hwdev_get_sq(). Prototype was for hinic_hwdev_get_rq() instead
drivers/net/ethernet/huawei/hinic/hinic_hw_if.c:341: warning: expecting prototype for dma_attr_table_init(). Prototype was for dma_attr_init() instead
drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c:904: warning: expecting prototype for hinic_put_wqe(). Prototype was for hinic_rq_put_wqe() instead
drivers/net/ethernet/huawei/hinic/hinic_main.c:241: warning: expecting prototype for create_txqs(). Prototype was for create_rxqs() instead
drivers/net/ethernet/huawei/hinic/hinic_main.c:295: warning: expecting prototype for free_txqs(). Prototype was for free_rxqs() instead
drivers/net/ethernet/huawei/hinic/hinic_tx.c:667: warning: expecting prototype for free_all_rx_skbs(). Prototype was for free_all_tx_skbs() instead
Cc: Bin Luo <luobin9@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/chelsio/cxgb4vf/sge.c:966: warning: expecting prototype for check_ring_tx_db(). Prototype was for ring_tx_db() instead
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/chelsio/cxgb3/sge.c:677: warning: expecting prototype for free_qset(). Prototype was for t3_free_qset() instead
drivers/net/ethernet/chelsio/cxgb3/sge.c:1266: warning: expecting prototype for eth_xmit(). Prototype was for t3_eth_xmit() instead
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/chelsio/cxgb3/sge.c:677: warning: expecting prototype for free_qset(). Prototype was for t3_free_qset() instead
drivers/net/ethernet/chelsio/cxgb3/sge.c:1266: warning: expecting prototype for eth_xmit(). Prototype was for t3_eth_xmit() instead
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/calxeda/xgmac.c:720: warning: expecting prototype for init_xgmac_dma_desc_rings(). Prototype was for xgmac_dma_desc_rings_init() instead
drivers/net/ethernet/calxeda/xgmac.c:867: warning: expecting prototype for xgmac_tx(). Prototype was for xgmac_tx_complete() instead
drivers/net/ethernet/calxeda/xgmac.c:1049: warning: expecting prototype for xgmac_release(). Prototype was for xgmac_stop() instead
drivers/net/ethernet/calxeda/xgmac.c:1822: warning: expecting prototype for xgmac_dvr_remove(). Prototype was for xgmac_remove() instead
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/cadence/macb_pci.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/net/ethernet/cadence/macb_ptp.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/brocade/bna/bfa_cee.c:91: warning: expecting prototype for bfa_cee_get_attr_isr(). Prototype was for bfa_cee_get_stats_isr() instead
Cc: Rasesh Mody <rmody@marvell.com>
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:13595: warning: expecting prototype for bnx2x_get_num_none_def_sbs(). Prototype was for bnx2x_get_num_non_def_sbs() instead
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:4165: warning: expecting prototype for atomic_add_ifless(). Prototype was for __atomic_add_ifless() instead
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:4193: warning: expecting prototype for atomic_dec_ifmoe(). Prototype was for __atomic_dec_ifmoe() instead
Cc: Ariel Elior <aelior@marvell.com>
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/atheros/atlx/atl1.c:1020: warning: expecting prototype for atl1_setup_mem_resources(). Prototype was for atl1_setup_ring_resources() instead
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/atheros/atl1e/atl1e_main.c:367: warning: expecting prototype for atl1e_set_mac(). Prototype was for atl1e_set_mac_addr() instead
drivers/net/ethernet/atheros/atl1e/atl1e_main.c:796: warning: expecting prototype for atl1e_setup_mem_resources(). Prototype was for atl1e_setup_ring_resources() instead
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/atheros/atl1c/atl1c_main.c:442: warning: expecting prototype for atl1c_set_mac(). Prototype was for atl1c_set_mac_addr() instead
drivers/net/ethernet/atheros/atl1c/atl1c_main.c:969: warning: expecting prototype for atl1c_setup_mem_resources(). Prototype was for atl1c_setup_ring_resources() instead
drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1375: warning: expecting prototype for atl1c_configure(). Prototype was for atl1c_configure_mac() instead
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/arc/emac_rockchip.c:18: warning: expecting prototype for emac(). Prototype was for DRV_NAME() instead
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove own module name definition and use KBUILD_MODNAME instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Seth David Schoen says:
====================
Treat IPv4 lowest address as ordinary unicast address
Treat the lowest address in a subnet (the address within the subnet
which contains all 0 bits) as an ordinary unicast address instead
of as a potential second broadcast address. For example, in subnet
192.168.17.24/29, which contains 8 addresses, make address 192.168.17.24
usable as a normal unicast address (while continuing to support
192.168.17.31 as a broadcast address).
Since EVERY network number or subnet formerly had its host number 0
reserved, this patchset adds 1 more usable host address to every network
and subnet (i.e., 2^(32-n)-1 instead of 2^(32-n)-2 addresses available
for assignment on each IPv4 /n subnet). For small subnets, this is a
significant gain; instead of 6 usable host addresses, a /29 would now
contain 7, a 16% increase.
The reserving of host number 0 for broadcast came about in RFC 1122 from
1989 (page 31, "IP addresses are not permitted to have the value 0 or -1
for any of the <Host-number>, <Network-number>, or <Subnet-number>
fields (except in the special cases listed above)" and page 66, "There
is a class of hosts [4.2BSD Unix and its derivatives, but not 4.3BSD]
that use non-standard broadcast address forms, substituting 0 for -1.
All hosts SHOULD recognize and accept any of these non-standard
broadcast addresses as the destination address of an incoming
datagram."). This has been repeated in subsequent RFCs, always with
backwards-compatibility rationales. Network troubles (broadcast storms)
ensued when some early hosts on a LAN treated the lowest address as
unicast and others treated it as broadcast. Multiple 1989 changes to IP
successfully prevented these. The key was adding the layering violation
rule requiring hosts to ignore all IP datagrams with unicast destination
addresses that were received in low-level (Ethernet) broadcasts. That
change is still in effect, and this patchset does not alter it. All
operating systems since 4.3BSD, including all the current BSD OSes, now
use the standard IP broadcast address. 4.2BSD has been obsolete for
more than 30 years, and all modern hosts ignore hardware broadcasts
containing unicast IP addresses, so there is no modern likelihood of
broadcast storms even when hosts disagree on the unicast vs. broadcast
status of a given address.
Tests with this patchset show that other Linux hosts on the local segment
simply ignore a host numbered with the lowest address, both for incoming
and outgoing packet purposes. They don't interoperate with it, but they
also don't cause broadcast storms or any other malfunction. If patched,
they have no trouble interoperating with a host at the lowest address.
Unmodified "distant" hosts that are not on the same segment successfully
interoperate, as long as the gateway on the local segment, and the local
host itself using the lowest address, have this patch. (Distant hosts
have no way of knowing whether a given address is the lowest address
in a faraway network segment, so they treat it no differently than any
other unicast address.) This means that each local site can change this
behavior locally, resulting immediately in global interoperability with
the newly usable lowest local address.
Modern software and documentation continues to use the definition of the
directed, or "net-directed", broadcast address as "a host ID of all one
bits". The Internet no longer gets any benefit from having two different
broadcast addresses usable on every Ethernet segment. I have not been
able to find any documentation that suggests that users or software should
ever intentionally use the all-zero form, or that justifies it other than
as a historic Berkeleyism. RFCs 1112, 1812, and 3021 state that hosts and
routers need to maintain compatibility with the old form -- but they give
no rationale other than the past existence of the 4.2BSD behavior.
We're happy to provide more historical details or information about
behavior of other systems in this regard by e-mail or as future patches
to kernel documentation files.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Expect the lowest IPv4 address in a subnet to be assignable
and addressable as a unicast (non-broadcast) address on a
local network segment.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Treat only the highest, not the lowest, IPv4 address within a local
subnet as a broadcast address.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the use of the qca8k dsa driver, some problem arised related to
port status detection. With a load on a specific port (for example a
simple speed test), the driver starts to behave in a strange way and
garbage data is produced. To address this, enlarge the sleep delay and
address a bug for the reg offset 31 that require additional delay for
this specific reg.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mdio drivers should not use REGCHACHE. Also disable locking since it's
handled by the mdio users and regmap is always accessed atomically.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix mixed whitespace and tab for define spacing.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith says:
====================
Multiple improvement to qca8k stability
Currently qca8337 switch are widely used on ipq8064 based router.
On these particular router it was notice a very unstable switch with
port not link detected as link with unknown speed, port dropping
randomly and general unreliability. Lots of testing and comparison
between this dsa driver and the original qsdk driver showed lack of some
additional delay and values. A main difference arised from the original
driver and the dsa one. The original driver didn't use MASTER regs to
read phy status and the dedicated mdio driver worked correctly. Now that
the dsa driver actually use these regs, it was found that these special
read/write operation required mutual exclusion to normal
qca8k_read/write operation. The add of mutex for these operation fixed
the random port dropping and now only the actual linked port randomly
dropped. Adding additional delay for set_page operation and fixing a bug
in the mdio dedicated driver fixed also this problem. The current driver
requires also more time to apply vlan switch. All of these changes and
tweak permit a now very stable and reliable dsa driver and 0 port
dropping. This series is currently tested by at least 5 user with
different routers and all reports positive results and no problems.
Changes v6:
- Fix spelling mistake
- Change ms to ns (confirmed by datasheet)
Changes v5:
- Removed mdio patch (sent separetly to try to reduce the series)
I know it was asked to reduced this series since it big, but rework
the new changes to skip and error check looks wrong. Since half of them
are actually already reviewed I think it's better to keep this series as is.
- Improve rgmii configurable patch
- Move qca8k phy dedicated driver to at803x phy driver
- Add support for dedicated internal mdio driver for qca8k
Changes v4:
- Use iopoll for busy_wait function
- Better describe and split some confusing commits
- Fix bad rgmii delay configurable patch
- Drop phy generic patch to pass flags with phylink_connect_phy
- Add dsa2 patch to declare mdio node in the switch node
- Add dsa patch to permit dsa driver to declare custom get_phys_mii_mask
Some background about the last 2 patch.
The qca8k switch doesn't have a 1:1 map between port reg and phy reg.
Currently it's used a function to convert port to the internal phy reg.
I added some patch to fix this.
- The dsa driver now check if the mdio node is present and use the of variant
of the mdiobus_register
- A custom phy_mii_mask is required as currently the mask is generated from
the port reg, but in our case the mask would be different as it should be
generated from the phy reg. To generalize this I added an extra function
that driver can provide to pass custom phy_mii_mask.
Changes v3:
- Revert mdio writel changes (use regmap with REGCACHE disabled)
- Split propagate error patch to 4 different patch
Changes v2:
- Implemented phy driver for internal PHYs
I'm testing cable test functions as I found some documentation that
actually declare regs about it. Problem is that it doesn't actually
work. It seems that the value set are ignored by the phy.
- Made the rgmii delay configurable
- Reordered patch
- Split mdio patches to more specific ones
- Reworked mdio driver to use readl/writel instead of regmap
- Reworked the entire driver to make it aware of any read/write error.
- Added phy generic patch to pass flags with phylink_connect_phy
function
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the at803x share the same regs, it's assumed they are based on the
same implementation. Make it part of the at803x PHY driver to skip
having redudant code.
Add initial support for qca8k internal PHYs. The internal PHYs requires
special mmd and debug values to be set based on the switch revision
passwd using the dev_flags. Supports output of idle, receive and eee_wake
errors stats.
Some debug values sets can't be translated as the documentation lacks any
reference about them.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean any whitespace errors and fix not aligned define.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define get_phy_flags to pass switch_Revision needed to tweak the
internal PHY with debug values based on the revision.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Improve the internal mdio read/write bus access by caching the value
without accessing it for every read/write.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document new way of declare mapping of internal PHY to port.
The new implementation directly declare the PHY connected to the port
by adding a node in the switch node. The driver detect this and register
an internal mdiobus using the mapping defined in the mdio node.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to setup_mdio_bus for internal phy declaration. Introduce a
flag to use the legacy port phy mapping by default and use the direct
mapping if a mdio node is detected in the switch node. Register a
dedicated mdio internal mdio bus to address the different mapping
between port and phy if the mdio node is detected.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The witch require some extra delay after setting page or the next
read/write can use still use the old page. Add a delay after the
set_page function to address this as it's done in QSDK legacy driver.
Some timeouts were notice with VLAN and phy function, enlarge the
mdio busy wait timeout to fix these problems.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen