Collect the time for each allocation recorded in page owner so that
allocation "surges" can be measured.
Record the pid for each allocation recorded in page owner so that the
source of allocation "surges" can be better identified.
The above is very useful when doing memory analysis. On a crash for
example, we can get this information from kdump (or ramdump) and parse it
to figure out memory allocation problems.
Please note that on x86_64 this increases the size of struct page_owner
from 16 bytes to 32.
Vlastimil: it's not a functionality intended for production, so unless
somebody says they need to enable page_owner for debugging and this
increase prevents them from fitting into available memory, let's not
complicate things with making this optional.
[lmark@codeaurora.org: v3]
Link: https://lkml.kernel.org/r/20201210160357.27779-1-georgi.djakov@linaro.org
Link: https://lkml.kernel.org/r/20201209125153.10533-1-georgi.djakov@linaro.org
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page owner of pages used by page owner itself used is missing on arm32
targets. The reason is dummy_handle and failure_handle is not initialized
correctly. Buddy allocator is used to initialize these two handles.
However, buddy allocator is not ready when page owner calls it. This
change fixed that by initializing page owner after buddy initialization.
The working flow before and after this change are:
original logic:
1. allocated memory for page_ext(using memblock).
2. invoke the init callback of page_ext_ops like page_owner(using buddy
allocator).
3. initialize buddy.
after this change:
1. allocated memory for page_ext(using memblock).
2. initialize buddy.
3. invoke the init callback of page_ext_ops like page_owner(using buddy
allocator).
with the change, failure/dummy_handle can get its correct value and page
owner output for example has the one for page owner itself:
Page allocated via order 2, mask 0x6202c0(GFP_USER|__GFP_NOWARN), pid 1006, ts 67278156558 ns
PFN 543776 type Unmovable Block 531 type Unmovable Flags 0x0()
init_page_owner+0x28/0x2f8
invoke_init_callbacks_flatmem+0x24/0x34
start_kernel+0x33c/0x5d8
Link: https://lkml.kernel.org/r/1603104925-5888-1-git-send-email-zhenhuah@codeaurora.org
Signed-off-by: Zhenhua Huang <zhenhuah@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page order of the slab that gets chosen for a given slab cache depends
on the number of objects that can be fit in the slab while meeting other
requirements. We start with a value of minimum objects based on
nr_cpu_ids that is driven by possible number of CPUs and hence could be
higher than the actual number of CPUs present in the system. This leads
to calculate_order() chosing a page order that is on the higher side
leading to increased slab memory consumption on systems that have bigger
page sizes.
Hence rely on the number of online CPUs when determining the mininum
objects, thereby increasing the chances of chosing a lower conservative
page order for the slab.
Vlastimil said:
"Ideally, we would react to hotplug events and update existing caches
accordingly. But for that, recalculation of order for existing caches
would have to be made safe, while not affecting hot paths. We have
removed the sysfs interface with 32a6f409b6 ("mm, slub: remove
runtime allocation order changes") as it didn't seem easy and worth
the trouble.
In case somebody wants to start with a large order right from the
boot because they know they will hotplug lots of cpus later, they can
use slub_min_objects= boot param to override this heuristic. So in
case this change regresses somebody's performance, there's a way
around it and thus the risk is low IMHO"
Link: https://lkml.kernel.org/r/20201118082759.1413056-1-bharata@linux.ibm.com
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9cf7a11183 ("mm/slub: make add_full() condition more explicit")
replaced an unnecessarily generic kmem_cache_debug(s) check with an
explicit check of SLAB_STORE_USER and #ifdef CONFIG_SLUB_DEBUG.
We can achieve the same specific check with the recently added
kmem_cache_debug_flags() which removes the #ifdef and restores the
no-branch-overhead benefit of static key check when slub debugging is not
enabled.
Link: https://lkml.kernel.org/r/3ef24214-38c7-1238-8296-88caf7f48ab6@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Abel Wu <wuyun.wu@huawei.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently in CONFIG_SLAB init_on_free happens too late, and heap objects
go to the heap quarantine not being erased.
Lets move init_on_free clearing before calling kasan_slab_free(). In that
case heap quarantine will store erased objects, similarly to CONFIG_SLUB=y
behavior.
Link: https://lkml.kernel.org/r/20201210183729.1261524-1-alex.popov@linux.com
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator expects that page->mapping is NULL for a page being
freed. SLAB and SLUB use the slab_cache field which is in union with
mapping, but before freeing the page, the field is referenced with the
"mapping" name when set to NULL.
It's IMHO more correct (albeit functionally the same) to use the
slab_cache name as that's the field we use in SL*B, and document why we
clear it in a comment (we don't clear fields such as s_mem or freelist, as
page allocator doesn't care about those). While using the 'mapping' name
would automagically keep the code correct if the unions in struct page
changed, such changes should be done consciously and needed changes
evaluated - the comment should help with that.
Link: https://lkml.kernel.org/r/20201210160020.21562-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.
Link: https://lkml.kernel.org/r/20201109110654.12547-10-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.
Link: https://lkml.kernel.org/r/20201109110654.12547-5-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When allocating an array of elements, users should check for
multiplication overflow or preferably use one of the provided helpers
like: kmalloc_array().
There's no krealloc_array() counterpart but there are many users who use
regular krealloc() to reallocate arrays. Let's provide an actual
krealloc_array() implementation.
While at it: add some documentation regarding krealloc.
Link: https://lkml.kernel.org/r/20201109110654.12547-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "slab: provide and use krealloc_array()", v3.
Andy brought to my attention the fact that users allocating an array of
equally sized elements should check if the size multiplication doesn't
overflow. This is why we have helpers like kmalloc_array().
However we don't have krealloc_array() equivalent and there are many users
who do their own multiplication when calling krealloc() for arrays.
This series provides krealloc_array() and uses it in a couple places.
A separate series will follow adding devm_krealloc_array() which is needed
in the xilinx adc driver.
This patch (of 9):
__GFP_ZERO is ignored by krealloc() (unless we fall-back to kmalloc()
path, in which case it's honored). Point that out in the kerneldoc.
Link: https://lkml.kernel.org/r/20201109110654.12547-1-brgl@bgdev.pl
Link: https://lkml.kernel.org/r/20201109110654.12547-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dump_unreclaimable_slab() acquires the slab_mutex first, and it won't
remove any slab_caches list entry when itering the slab_caches lists.
Thus we do not need list_for_each_entry_safe here, which is against
removal of list entry.
Link: https://lkml.kernel.org/r/20200926043440.GA180545@rlk
Signed-off-by: Hui Su <sh_def@163.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are a few spelling mistakes in the Kconfig comments and help text.
Fix these.
Link: https://lkml.kernel.org/r/20201207155004.171962-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A break is not needed if it is preceded by a goto
Link: https://lkml.kernel.org/r/20201019175216.2329-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This variable isn't used anymore, remove it to skip W=1 warning:
fs/ntfs/inode.c:2350:6: warning: variable `attr_len' set but not used [-Wunused-but-set-variable]
Link: https://lkml.kernel.org/r/4194376f-898b-b602-81c3-210567712092@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We actually don't use these varibles, so remove them to avoid gcc warning:
fs/ntfs/file.c:326:14: warning: variable `base_ni' set but not used [-Wunused-but-set-variable]
fs/ntfs/logfile.c:481:21: warning: variable `log_page_mask' set but not used [-Wunused-but-set-variable]
Link: https://lkml.kernel.org/r/1604821092-54631-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the discussion about preempt count consistency across kernel
configurations:
https://lore.kernel.org/r/20200914204209.256266093@linutronix.de/
it was concluded that the usage of in_interrupt() and related context
checks should be removed from non-core code.
Both BUG_ON()s in ide-probe.c were introduced in commit
4015c949fb465 ("[PATCH] update ide core")
when ide_unregister() was extended with semaphore based locking. Both
checks won't complain about disabled preemption which is also wrong.
The might_sleep() in today's mutex_lock() will complain about the
missuses.
Remove the BUG_ON() statements.
Link: https://lkml.kernel.org/r/20201120092421.1023428-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
falconide_get_lock() is called by ide_lock_host() and its caller
(ide_issue_rq()) has already a might_sleep() check.
stdma_lock() has wait_event() which also has a might_sleep() check.
Remove the in_interrupt() check.
Link: https://lkml.kernel.org/r/20201113161021.2217361-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.
The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.
This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:
In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
from ../include/tst_netlink.h:14,
from tst_crypto.c:13:
x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
struct sysinfo {
^~~~~~~
In file included from ../include/tst_safe_macros.h:15,
from ../include/tst_test.h:93,
from tst_crypto.c:11:
x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here
Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Suggested-by: Rich Felker <dalias@aerifal.cx>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kthread worker API is simple. In short, it allows to create, use, and
destroy workers. kthread_create_worker_on_cpu() just allows to bind a
newly created worker to a given CPU.
It is up to the API user how to handle CPU hotplug. They have to decide
how to handle pending work items, prevent queuing new ones, and restore
the functionality when the CPU goes off and on. There are few catches:
+ The CPU affinity gets lost when it is scheduled on an offline CPU.
+ The worker might not exist when the CPU was off when the user
created the workers.
A good practice is to implement two CPU hotplug callbacks and
destroy/create the worker when CPU goes down/up.
Mention this in the function description.
[akpm@linux-foundation.org: grammar tweaks]
Link: https://lore.kernel.org/r/20201028073031.4536-1-qiang.zhang@windriver.com
Link: https://lkml.kernel.org/r/20201102101039.19227-1-pmladek@suse.com
Reported-by: Zhang Qiang <Qiang.Zhang@windriver.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While migrating some code from wq to kthread_worker, I found that I missed
the execute_start/end tracepoints. So add similar tracepoints for
kthread_work. And for completeness, queue_work tracepoint (although this
one differs slightly from the matching workqueue tracepoint).
Link: https://lkml.kernel.org/r/20201010180323.126634-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Phil Auld <pauld@redhat.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vincent Donnefort <vincent.donnefort@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Ilias Stamatis <stamatis.iliass@gmail.com>
Cc: Liang Chen <cl@rock-chips.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "J. Bruce Fields" <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Correct a few problems in the x86 and the generic membarrier
implementation. Small corrections for assumptions about visibility
which have turned out not to be true.
- Make the PAT bits for memory encryption correct vs. 4K and 2M/1G page
table entries as they are at a different location.
- Fix a concurrency issue in the the local bandwidth readout of resource
control leading to incorrect values
- Fix the ordering of allocating a vector for an interrupt. The order
missed to respect the provided cpumask when the first attempt of
allocating node local in the mask fails. It then tries the node instead
of trying the full provided mask first. This leads to erroneous error
messages and breaking the (user) supplied affinity request. Reorder it.
- Make the INT3 padding detection in optprobe work correctly.
-----BEGIN PGP SIGNATURE-----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=t31y
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 and membarrier fixes:
- Correct a few problems in the x86 and the generic membarrier
implementation. Small corrections for assumptions about visibility
which have turned out not to be true.
- Make the PAT bits for memory encryption correct vs 4K and 2M/1G
page table entries as they are at a different location.
- Fix a concurrency issue in the the local bandwidth readout of
resource control leading to incorrect values
- Fix the ordering of allocating a vector for an interrupt. The order
missed to respect the provided cpumask when the first attempt of
allocating node local in the mask fails. It then tries the node
instead of trying the full provided mask first. This leads to
erroneous error messages and breaking the (user) supplied affinity
request. Reorder it.
- Make the INT3 padding detection in optprobe work correctly"
* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe to detect INT3 padding correctly
x86/apic/vector: Fix ordering in vector assignment
x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
membarrier: Execute SYNC_CORE on the calling thread
membarrier: Explicitly sync remote cores when SYNC_CORE is requested
membarrier: Add an actual barrier before rseq_preempt()
x86/membarrier: Get rid of a dubious optimization
-----BEGIN PGP SIGNATURE-----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=PmVb
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"This should be it for 5.10.
Mike and Song looked into the warning case, and thankfully it appears
the fix was pretty trivial - we can just change the md device chunk
type to unsigned int to get rid of it. They cannot currently be < 0,
and nobody is checking for that either.
We're reverting the discard changes as the corruption reports came in
very late, and there's just no time to attempt to deal with it at this
point. Reverting the changes in question is the right call for 5.10"
* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
md: change mddev 'chunk_sectors' from int to unsigned
Revert "md: add md_submit_discard_bio() for submitting discard bio"
Revert "md/raid10: extend r10bio devs to raid disks"
Revert "md/raid10: pull codes that wait for blocked dev into one function"
Revert "md/raid10: improve raid10 discard request"
Revert "md/raid10: improve discard request for far layout"
Revert "dm raid: remove unnecessary discard limits for raid10"
Five small fixes: four in drivers: hisi_sas: fix internal queue
timeout, be2iscsi: revert a prior fix causing problems, bnx2i: add
missing dependency, storvsc: late arriving revert of a problem fix,
and one in the core. The core one is a minor change to stop paying
attention to the busy count when returning out of resources because
there's a race window where the queue might not restart due to missing
returning I/O.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9UadiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfV1AP4qISaq
qQyrX4OcePdQL9YrfaBCuV3NckE+cFKKO4qCmAEAxTarxMsgqpS1M9W6Y/D271mz
Bpkc0QI1xbCUIyoGk6c=
=HaYI
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes. Four in drivers:
- hisi_sas: fix internal queue timeout
- be2iscsi: revert a prior fix causing problems
- bnx2i: add missing dependency
- storvsc: late arriving revert of a problem fix
and one in the core.
The core one is a minor change to stop paying attention to the busy
count when returning out of resources because there's a race window
where the queue might not restart due to missing returning I/O"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"
scsi: hisi_sas: Select a suitable queue for internal I/Os
scsi: core: Fix race between handling STS_RESOURCE and completion
scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
scsi: bnx2i: Requires MMU
Pull i2c fix from Wolfram Sang:
"Bugfix for the AT24 EEPROM driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
misc: eeprom: at24: fix NVMEM name with custom AT24 device name
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/UDHQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMGeQf9EtGft5U5EihqAbNr2O61Bh4ptCIT
+qNWWfuGQkKLsP6PCHMUJnNI3WJy2/Gb5+nUHjFXSEZBP2l3KGRuDniAdm4+DyEi
2khVmJiXYn2q2yfodmpHA/dqav3OHSrsq2IfH+J+WAFlIHnjkdz3Wk1zNFk7Y/xv
PVv2czvXhsnrvHvNp5e1+YsVGkMZc9fwXLRbac7ptmaKUKCBAgpZO8Gkc2GGgOdE
zUDp3qA8/7Ys+vzzYfPrRMUhev9dgE4x2TBmtOuzqOcfj2FOKRbKbwjur37fJ61j
Px4F2ZI0GEL0RrHvZK1vZ5KO41BcD+gQPumKAg1Lgz312loKj85RG8nBEQ==
=BJ9g
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes for ARM, x86 and tools"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools/kvm_stat: Exempt time-based counters
KVM: mmu: Fix SPTE encoding of MMIO generation upper half
kvm: x86/mmu: Use cpuid to determine max gfn
kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()
selftests: kvm/set_memory_region_test: Fix race in move region test
KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
KVM: arm64: Fix handling of merging tables into a block entry
KVM: arm64: Fix memory leak on stage2 update of a valid PTE
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX9MyxQAKCRCAXGG7T9hj
vrL8AP0aGFq2Ya77poPVLWMvrBV9KtMVzpLUBzF/M75ShE0EXAD7B7K5QOL/1RcJ
6BD85rFyOaA0YrunHYGJAtDTqms4ZQY=
=uwI9
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A short series fixing a regression introduced in 5.9 for running as
Xen dom0 on a system with NVMe backed storage"
* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't use page->lru for ZONE_DEVICE memory
xen: add helpers for caching grant mapping pages
I've just got one fix. It's nothing critical, just a randconfig that
wasn't building. That said, it does seem pretty safe and is technically
a regression so I'm sending it along for 5.10:
* Define get_cycles64() all the time, as it's used by most
configurations.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl/T5B4THHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiQflD/4oJJzU9XWYqIzUwidXbISzL9nm3Sg7
Izo7mlhei2Hlp9CrnEcCkAdSpYRvdOsnK9ikcOe0gjOqI03DbFp+tN/oZkhLR+Gl
HkLLm7jmNs7NumQeQ4HzMDl+SbA2zE6vUkYgaf99Oy7bD6DvVHEWe3Ghg89fqUka
W2OzOV0m95sNYG0Yy+/YKPtb0uoYAGQeSD337etTgzPIZRqetYh9kv23H9pXpShg
Z47+a8/ZUXLSdZjmN3oOcte5dAG4ygCoge6UkE1u9T2ATjYWUkUacoBkzzavGOrN
a2nz2hB0A2Wfm260LDOBe+5+YqbNPxDKUuBzXL+n/g66zggZFHoPkx2CbJyU3PBj
2QtxiRbrLAqoldEn9XnR47K+i5Eg9M+vTy09WaHbvNp8bIKPf0RY3IOuiJqCTeOx
vlb6q17c7YGos0zPZNj9gXmZu+/ayCvl0rPXjwybHq+SOi2TXYeKeBVF4cBKDWOo
g2oed2gOaX1ekW9b11giygWdDGlwPWxz6dMUlEtEm/2y4emOz/otTHAblq9l+jZf
JKtUCm2Vxu4ukxFjXuNVElV5LPLR2EHrm+vJfwFSWePY+/+JQN0ft6s3zCBlSN6U
RaHyNrQKAqNqJzftArBgiKGObBj8N7QJ6SoFNVmQBCAQHIvRGvI8tHcqyIKFYRLf
YZn+8RbXaW4nOQ==
=wSj3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"Just one fix. It's nothing critical, just a randconfig that wasn't
building. That said, it does seem pretty safe and is technically a
regression so I'm sending it along for 5.10:
- define get_cycles64() all the time, as it's used by most
configurations"
* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Define get_cycles64() regardless of M-mode
Pull input fixes from Dmitry Torokhov:
- a fix for cm109 stomping on its own control URB if it tries to toggle
buzzer immediately after userspace opens input device (found by
syzcaller)
- another fix for Raydium touchscreens that do not like splitting
command transfers
- quirks for i8042, soc_button_array, and goodix drivers to make them
work better with certain hardware.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix - add upside-down quirk for Teclast X98 Pro tablet
Input: cm109 - do not stomp on control URB
Input: i8042 - add Acer laptops to the i8042 reset list
Input: cros_ec_keyb - send 'scancodes' in addition to key events
Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list
Input: raydium_ts_i2c - do not split tx transactions
Commit e2782f560c ("Revert "dm raid: remove unnecessary discard
limits for raid10"") exposed compiler warnings introduced by commit
e0910c8e4f ("dm raid: fix discard limits for raid1 and raid10"):
In file included from ./include/linux/kernel.h:14,
from ./include/asm-generic/bug.h:20,
from ./arch/x86/include/asm/bug.h:93,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/gfp.h:5,
from ./include/linux/slab.h:15,
from drivers/md/dm-raid.c:8:
drivers/md/dm-raid.c: In function ‘raid_io_hints’:
./include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^~
./include/linux/minmax.h:32:4: note: in expansion of macro ‘__typecheck’
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
./include/linux/minmax.h:42:24: note: in expansion of macro ‘__safe_cmp’
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~
./include/linux/minmax.h:51:19: note: in expansion of macro ‘__careful_cmp’
#define min(x, y) __careful_cmp(x, y, <)
^~~~~~~~~~~~~
./include/linux/minmax.h:84:39: note: in expansion of macro ‘min’
__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
^~~
drivers/md/dm-raid.c:3739:33: note: in expansion of macro ‘min_not_zero’
limits->max_discard_sectors = min_not_zero(rs->md.chunk_sectors,
^~~~~~~~~~~~
Fix this by changing the chunk_sectors member of 'struct mddev' from
int to 'unsigned int' to match the type used for the 'chunk_sectors'
member of 'struct queue_limits'. Various MD code still uses 'int' but
none of it appears to ever make use of signed int; and storing
positive signed int in unsigned is perfectly safe.
Reported-by: Song Liu <songliubraving@fb.com>
Fixes: e2782f560c ("Revert "dm raid: remove unnecessary discard limits for raid10"")
Fixes: e0910c8e4f ("dm raid: fix discard limits for raid1 and raid10")
Cc: stable@vger,kernel.org # e0910c8e4f was marked for stable@
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit
7705dc8557 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
changed the padding bytes between functions from NOP to INT3. However,
when optprobe decodes a target function it finds INT3 and gives up the
jump optimization.
Instead of giving up any INT3 detection, check whether the rest of the
bytes to the end of the function are INT3. If all of them are INT3,
those come from the linker. In that case, continue the optprobe jump
optimization.
[ bp: Massage commit message. ]
Fixes: 7705dc8557 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
Reported-by: Adam Zabrocki <pi3@pi3.com.pl>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2
The touchscreen on the Teclast x98 Pro is also mounted upside-down in
relation to the display orientation.
Signed-off-by: Simon Beginn <linux@simonmicro.de>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The new counters halt_poll_success_ns and halt_poll_fail_ns do not count
events. Instead they provide a time, and mess up our statistics. Therefore,
we should exclude them.
Removal is currently implemented with an exempt list. If more counters like
these appear, we can think about a more general rule like excluding all
fields name "*_ns", in case that's a standing convention.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Tested-and-reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20201208210829.101324-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit cae7ed3c2c ("KVM: x86: Refactor the MMIO SPTE generation handling")
cleaned up the computation of MMIO generation SPTE masks, however it
introduced a bug how the upper part was encoded:
SPTE bits 52-61 were supposed to contain bits 10-19 of the current
generation number, however a missing shift encoded bits 1-10 there instead
(mostly duplicating the lower part of the encoded generation number that
then consisted of bits 1-9).
In the meantime, the upper part was shrunk by one bit and moved by
subsequent commits to become an upper half of the encoded generation number
(bits 9-17 of bits 0-17 encoded in a SPTE).
In addition to the above, commit 56871d444b ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation")
has changed the SPTE bit range assigned to encode the generation number and
the total number of bits encoded but did not update them in the comment
attached to their defines, nor in the KVM MMU doc.
Let's do it here, too, since it is too trivial thing to warrant a separate
commit.
Fixes: cae7ed3c2c ("KVM: x86: Refactor the MMIO SPTE generation handling")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com>
Cc: stable@vger.kernel.org
[Reorganize macros so that everything is computed from the bit ranges. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Second fixes series initiated because of a rework of the ECC engine
subsystem. The location of the DT parsing logic got moved, breaking
several drivers which in fact were not doing the ECC engine
initialization at the right place. These drivers have been fixed by
enforcing a particular ECC engine type and algorithm, software
Hamming, while the algorithm may be overwritten by a DT
property. This merge request fixes this in the xway, socrates,
plat_nand, pasemi, orion, mpc5121, gpio, au1550 and ams-delta
controller drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl/TxGQACgkQJWrqGEe9
VoRkrwf+JQtBwLCTg1vHqw0IWdPNuazXZQzlO5Hk9XTwAs6aJuklS/QMseyANHUK
WlauMJO38LSIOBiyz3kFrQ8UFN+9/6sVMyBXpCRzG/kwwCqHRUEQgLtpVYrL+Hc6
g25U9IMNlnxibqcGFl5jxK1Vi8tXwWGRNPxWewgwLtZ14Qkf7bCMbAnBtWwkaSAe
GJWLuF16MZ3yxlSxLbpKt7HlxHFeADRUSrfrP5oxpT4vBVvbv8wl3Q0rrORU8hnk
vhQmRIw6BQQ0rY9MBv0Ap9yRYhC3xY9OSKd5VZxMybjm98Bu/mav/IzFa74vm9yn
mu3OvpuMQXUZISrcLjxG4TrZr3QZtw==
=en6S
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Second series of fixes for raw NAND drivers initiated because of a
rework of the ECC engine subsystem.
The location of the DT parsing logic got moved, breaking several
drivers which in fact were not doing the ECC engine initialization at
the right place.
These drivers have been fixed by enforcing a particular ECC engine
type and algorithm, software Hamming, while the algorithm may be
overwritten by a DT property. This merge request fixes this in the
xway, socrates, plat_nand, pasemi, orion, mpc5121, gpio, au1550 and
ams-delta controller drivers"
* tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: xway: Do not force a particular software ECC engine
mtd: rawnand: socrates: Do not force a particular software ECC engine
mtd: rawnand: plat_nand: Do not force a particular software ECC engine
mtd: rawnand: pasemi: Do not force a particular software ECC engine
mtd: rawnand: orion: Do not force a particular software ECC engine
mtd: rawnand: mpc5121: Do not force a particular software ECC engine
mtd: rawnand: gpio: Do not force a particular software ECC engine
mtd: rawnand: au1550: Do not force a particular software ECC engine
mtd: rawnand: ams-delta: Do not force a particular software ECC engine
- Fixup condition for CMD13 polling for RPMB requests
MMC host:
- mtk-sd: Fix system suspend/resume support for CQHCI
- mtd-sd: Extend SDIO IRQ fix to more variants
- sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
- tmio: Bring HW to a sane state after a power off
-----BEGIN PGP SIGNATURE-----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=ui1Q
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes:
MMC core:
- Fixup condition for CMD13 polling for RPMB requests
MMC host:
- mtk-sd: Fix system suspend/resume support for CQHCI
- mtd-sd: Extend SDIO IRQ fix to more variants
- sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
- tmio: Bring HW to a sane state after a power off"
* tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mediatek: mark PM functions as __maybe_unused
mmc: block: Fixup condition for CMD13 polling for RPMB requests
mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFF
mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
mmc: mediatek: Extend recheck_sdio_irq fix to more variants
mmc: mediatek: Fix system suspend/resume support for CQHCI
- fix NVMEM name with custom AT24 device name
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAl/TxuIACgkQEacuoBRx
13Kn5hAAx1L6ZSXm16sTBICbcu1HXNz8QfUoNwbYIHGZXBrH94KQ2yO/8k6t5cR8
MUgjdj3TLMJNxBAhgwKmq9l6cFSjdU++8crzVlpWOqT5Elq9KTOgoq2/oHHNgczc
O2kEVInLwAjijcyXob0XRIHcvjXwnGI4r7o/BVKgwu3kZlMsTnSPJsFH/cefvL+S
Qao2S3Hk5J0JPn9cLbLBIzaRSQRN85u+CRf6co5Ylb911HlZn8wfub1KbiJ9Q0gl
Qb5XVODs9gILeiE5nwUkZq4xwZ/0I4gNjPWOnCCLopahXsOgopXA6Qs/stK8z2Bo
ah96lHYutBR75NpKVDx6RC8TV7g6n2QJo4K5Vsy8YPzGN/SsRWc8fkM95Rkct+L9
8uPj0tI60fpWis/Wp72LFrNTV7/PV7OOfzfun8HnQnNmXy2V47CCzugGEoeWe27h
rkXGJZYYvmM4ouQLvPfgooJgaaSMupAhq2RVqZG+t4xzgI/MIcmhm30HKlo0yF4u
CUPJp5G7ulrvpOiOYoAgUa/qPd3JhVbruxMBEfd8CDIbM6AUfxwFHSNZR3xW0B++
EXtGrc3hOiuCMbIXHSJG1sqnd9f2eBC37b158AuomiXSZ22Y/PJdzoTLAtNBk75A
KR/akK7HMsQj37UmPu7klm2rwlUxyJVzrLKuobCTLvbqzvQptHs=
=Kmok
-----END PGP SIGNATURE-----
Merge tag 'at24-fixes-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v5.10
- fix NVMEM name with custom AT24 device name
A single patch in this pull request to fix a BIO and page reference
leak when writing sequential zone files.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCX9NY0gAKCRDdoc3SxdoY
dga9AQCq+hAOyA1FeCkWwBG0gywIIVhPscNphe1bH576JoaIZAEA86DsGB9BED7H
yaezfh5W1lr63ctxtSVdyo+x5172fgY=
=Te7s
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
"A single patch in this pull request to fix a BIO and page reference
leak when writing sequential zone files"
* tag 'zonefs-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix page reference and BIO leak
Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.
Fixes: eaa6bcb71e ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc fixes from Andrew Morton:
"8 patches.
Subsystems affected by this patch series: proc, selftests, kbuild, and
mm (pagecache, kasan, hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/hugetlb: clear compound_nr before freeing gigantic pages
kasan: fix object remaining in offline per-cpu quarantine
elfcore: fix building with clang
initramfs: fix clang build failure
kbuild: avoid static_assert for genksyms
selftest/fpu: avoid clang warning
proc: use untagged_addr() for pagemap_read addresses
revert "mm/filemap: add static for function __add_to_page_cache_locked"
Commit 1378a5ee45 ("mm: store compound_nr as well as compound_order")
added compound_nr counter to first tail struct page, overlaying with
page->mapping. The overlay itself is fine, but while freeing gigantic
hugepages via free_contig_range(), a "bad page" check will trigger for
non-NULL page->mapping on the first tail page:
BUG: Bad page state in process bash pfn:380001
page:00000000c35f0856 refcount:0 mapcount:0 mapping:00000000126b68aa index:0x0 pfn:0x380001
aops:0x0
flags: 0x3ffff00000000000()
raw: 3ffff00000000000 0000000000000100 0000000000000122 0000000100000000
raw: 0000000000000000 0000000000000000 ffffffff00000000 0000000000000000
page dumped because: non-NULL mapping
Modules linked in:
CPU: 6 PID: 616 Comm: bash Not tainted 5.10.0-rc7-next-20201208 #1
Hardware name: IBM 3906 M03 703 (LPAR)
Call Trace:
show_stack+0x6e/0xe8
dump_stack+0x90/0xc8
bad_page+0xd6/0x130
free_pcppages_bulk+0x26a/0x800
free_unref_page+0x6e/0x90
free_contig_range+0x94/0xe8
update_and_free_page+0x1c4/0x2c8
free_pool_huge_page+0x11e/0x138
set_max_huge_pages+0x228/0x300
nr_hugepages_store_common+0xb8/0x130
kernfs_fop_write+0xd2/0x218
vfs_write+0xb0/0x2b8
ksys_write+0xac/0xe0
system_call+0xe6/0x288
Disabling lock debugging due to kernel taint
This is because only the compound_order is cleared in
destroy_compound_gigantic_page(), and compound_nr is set to
1U << order == 1 for order 0 in set_compound_order(page, 0).
Fix this by explicitly clearing compound_nr for first tail page after
calling set_compound_order(page, 0).
Link: https://lkml.kernel.org/r/20201208182813.66391-2-gerald.schaefer@linux.ibm.com
Fixes: 1378a5ee45 ("mm: store compound_nr as well as compound_order")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We hit this issue in our internal test. When enabling generic kasan, a
kfree()'d object is put into per-cpu quarantine first. If the cpu goes
offline, object still remains in the per-cpu quarantine. If we call
kmem_cache_destroy() now, slub will report "Objects remaining" error.
=============================================================================
BUG test_module_slab (Not tainted): Objects remaining in test_module_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Slab 0x(____ptrval____) objects=34 used=1 fp=0x(____ptrval____) flags=0x2ffff00000010200
CPU: 3 PID: 176 Comm: cat Tainted: G B 5.10.0-rc1-00007-g4525c8781ec0-dirty #10
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2b0
show_stack+0x18/0x68
dump_stack+0xfc/0x168
slab_err+0xac/0xd4
__kmem_cache_shutdown+0x1e4/0x3c8
kmem_cache_destroy+0x68/0x130
test_version_show+0x84/0xf0
module_attr_show+0x40/0x60
sysfs_kf_seq_show+0x128/0x1c0
kernfs_seq_show+0xa0/0xb8
seq_read+0x1f0/0x7e8
kernfs_fop_read+0x70/0x338
vfs_read+0xe4/0x250
ksys_read+0xc8/0x180
__arm64_sys_read+0x44/0x58
el0_svc_common.constprop.0+0xac/0x228
do_el0_svc+0x38/0xa0
el0_sync_handler+0x170/0x178
el0_sync+0x174/0x180
INFO: Object 0x(____ptrval____) @offset=15848
INFO: Allocated in test_version_show+0x98/0xf0 age=8188 cpu=6 pid=172
stack_trace_save+0x9c/0xd0
set_track+0x64/0xf0
alloc_debug_processing+0x104/0x1a0
___slab_alloc+0x628/0x648
__slab_alloc.isra.0+0x2c/0x58
kmem_cache_alloc+0x560/0x588
test_version_show+0x98/0xf0
module_attr_show+0x40/0x60
sysfs_kf_seq_show+0x128/0x1c0
kernfs_seq_show+0xa0/0xb8
seq_read+0x1f0/0x7e8
kernfs_fop_read+0x70/0x338
vfs_read+0xe4/0x250
ksys_read+0xc8/0x180
__arm64_sys_read+0x44/0x58
el0_svc_common.constprop.0+0xac/0x228
kmem_cache_destroy test_module_slab: Slab cache still has objects
Register a cpu hotplug function to remove all objects in the offline
per-cpu quarantine when cpu is going offline. Set a per-cpu variable to
indicate this cpu is offline.
[qiang.zhang@windriver.com: fix slab double free when cpu-hotplug]
Link: https://lkml.kernel.org/r/20201204102206.20237-1-qiang.zhang@windriver.com
Link: https://lkml.kernel.org/r/1606895585-17382-2-git-send-email-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Guangye Yang <guangye.yang@mediatek.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Qian Cai <qcai@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Liam Mark