This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.
While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.
TRIM must be disabled for this device.
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
06f6c4c6c3 ("ata: libata: add missing ata_identify_page_supported() calls")
introduced additional calls to ata_identify_page_supported(), thus also
adding indirectly accesses to the device log directory log page through
ata_log_supported(). Reading this log page causes SATADOM-ML 3ME devices
to lock up.
Introduce the horkage flag ATA_HORKAGE_NO_LOG_DIR to prevent accesses to
the log directory in ata_log_supported() and add a blacklist entry
with this flag for "SATADOM-ML 3ME" devices.
Fixes: 636f6e2af4 ("libata: add horkage for missing Identify Device log")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drivers that need to tweak a device IDENTIFY data implement the
read_id() port operation. The IDENTIFY data buffer is passed as an
argument to the read_id() operation for drivers to use. However, when
this operation is called, the IDENTIFY data is not yet converted to CPU
endian and contains le16 words.
Change the interface of the read_id operation to pass a __le16 * pointer
to the IDENTIFY data buffer to clarify the buffer endianness. Fix the
pata_netcell, pata_it821x, ahci_xgene, ahci_ceva and ahci_brcm drivers
implementation of this operation and modify the code to corretly deal
with identify data words manipulation to avoid sparse warnings such as:
drivers/ata/ahci_xgene.c:262:33: warning: invalid assignment: &=
drivers/ata/ahci_xgene.c:262:33: left side has type unsigned short
drivers/ata/ahci_xgene.c:262:33: right side has type restricted __le16
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Callers are already protected by ata_dev_print_info(), so no need
to have an additional configuration parameter here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Convert the sole caller to ata_dev_dbg() and remove the definition.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
All callsites have been converted to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The WARN level was always enabled, so drop ata_msg_warn().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The one caller have been converted to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Most of the information is already covered by tracepoints
(if not downright pointless), so remove the VPRINTK() calls.
And while we're at it, remove ata_scsi_dump_cdb(), too,
as this information can be retrieved from scsi tracing.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Replace all DPRINTK calls with ata_dev_dbg().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use standard pr_{debug,info,notice,warn,err} macros instead of the
hand-crafted printk helpers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add tracepoints for bus-master DMA and taskfile related functions.
That allows us to drop the relevant DPRINTK() calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Convert the existing ata_qc_issue() tracepoint into a template,
and add tracepoints for ata_qc_prep() and ata_qc_issue() based
on that template.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To follow the flow of control we should be using tracepoints, as
they will tie in with the actual I/O flow and deliver a better
overview about what it happening.
This patch adds tracepoints for hard reset, soft reset, and postreset
and adds them in the libata-eh control flow.
With that we can drop the reset DPRINTK calls in the various drivers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
With moving ata_dev_dbg() over to dynamic debugging ATA_HORKAGE_DUMP_ID
will now print out the raw IDENTIFY data without a header unless
explicitly enable via dyndebug.
So move the logging level up to INFO and have the header printed
always.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use ata_dev_dbg() to print out the information in ata_dump_id()
and remove the ata_msg_probe() conditional.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add an ata_port_classify() helper to print out the results from
the device classification and remove the debugging statements
from ata_dev_classify().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Debugging messages in pci init functions or sg setup are pretty
much pointless, as the workflow pretty much decides what happened.
So drop them.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The ASMedia 1092 has a configuration mode which will present a
dummy device; sadly the implementation falsely claims to provide
a device with 100M which doesn't actually exist.
So disable this device to avoid errors during boot.
Cc: stable@vger.kernel.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_dev_config_ncq_prio() and ata_dev_config_devslp() both access pages
of the IDENTIFY DEVICE data log. Before calling ata_read_log_page(),
make sure to check for the existence of the IDENTIFY DEVICE data log and
of the log page accessed using ata_identify_page_supported(). This
avoids useless error messages from ata_read_log_page() and failures with
some LLDD scsi drivers using libsas.
Reported-by: Nikolay <knv418@gmail.com>
Cc: stable@kernel.org # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Matthew Perkowski <mgperkow@gmail.com>
If ata_read_log_page() fails to read a log page, the ata_dev_err() error
message only print the page number, omitting the log number. In case of
error, facilitate debugging by also printing the log number.
Cc: stable@kernel.org # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Matthew Perkowski <mgperkow@gmail.com>
ACS-3 introduced the ATA Identify Device Data log as mandatory. A
warning message currently signals to the user if a device does not
report supporting this log page in the log directory page, regardless
of the ATA version of the device. Furthermore, this warning will appear
for all attempts at accessing this missing log page during device
revalidation.
Since it is useless to constantly access the log directory and warn
about this lack of support once we have discovered that the device
does not support this log page, introduce the horkage flag
ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for
the Identify Device Data log page. Set this flag when
ata_log_supported() returns false in ata_identify_page_supported().
The warning is printed only if the device ATA level is 10 or above
(ACS-3 or above), and only once on device scan. With this flag set, the
log directory page is not accessed again to test for Identify Device
Data log page support.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Changes in libata for 5.16 include the following:
* Remove duplicated AHCI adapter PCI device IDs (from Krzysztof)
* Cleanup of device DMA state checking to consistantly use
ata_dma_enabled() (from Reimar)
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYYDUiwAKCRDdoc3SxdoY
dgcUAP9G6Bf5Yar37Nd+2eoROAh01jkc4J2ez0p/pr+kDlp0MQD/f6Cfj1oFpoqn
kZXd3dIyf6uOtkJRXbyc1YLMzdr8Xw8=
=EaHo
-----END PGP SIGNATURE-----
Merge tag 'libata-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata updates from Damien Le Moal:
- Remove duplicated AHCI adapter PCI device IDs (from Krzysztof)
- Cleanup of device DMA state checking to consistantly use
ata_dma_enabled() (from Reimar)
* tag 'libata-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
pata_radisys: fix checking of DMA state
pata_optidma: fix checking of DMA state
pata_amd: fix checking of DMA state
pata_ali: fix checking of DMA state
libata-scsi: fix checking of DMA state
libata: fix checking of DMA state
Add AHCI support for ASM1062+JBM575 cards
ahci: remove duplicated PCI device IDs
Add support to discover if an ATA device supports the Concurrent
Positioning Ranges data log (address 0x47), indicating that the device
is capable of seeking to multiple different locations in parallel using
multiple actuators serving different LBA ranges.
Also add support to translate the concurrent positioning ranges log
into its equivalent Concurrent Positioning Ranges VPD page B9h in
libata-scsi.c.
The format of the Concurrent Positioning Ranges Log is defined in ACS-5
r9.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-4-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Checking if DMA is enabled should be done via the
ata_dma_enabled helper function, since the init state
0xff indicates disabled.
This meant that ATA_CMD_READ_LOG_DMA_EXT was used and probed
for before DMA was enabled, which caused hangs for some combinations
of controllers and devices.
It might also have caused it to be incorrectly disabled as broken,
but there have been no reports of that.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195895
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Many users are reporting that the Samsung 860 and 870 SSD are having
various issues when combined with AMD/ATI (vendor ID 0x1002) SATA
controllers and only completely disabling NCQ helps to avoid these
issues.
Always disabling NCQ for Samsung 860/870 SSDs regardless of the host
SATA adapter vendor will cause I/O performance degradation with well
behaved adapters. To limit the performance impact to ATI adapters,
introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ
only for these adapters.
Also, two libata.force parameters (noncqati and ncqati) are introduced
to disable and enable the NCQ for the system which equipped with ATI
SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ
function to be enabled or disabled according to the demand.
After verifying the chipset from the user reports, the issue appears
on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on
recent AMD SATA adapters. The vendor ID of ATI should be 0x1002.
Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to
ATA_HORKAGE_NO_NCQ_ON_ATI.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit ca6bfcb2f6 ("libata: Enable queued TRIM for Samsung SSD 860")
limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*",
covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*"
and "Samsung SSD 850*" series based on information from Samsung.
But there is a large number of users which is still reporting issues
with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or
Marvell SATA controllers and all reporters also report these problems
going away when disabling queued trims.
Note that with AMD SATA controllers users are reporting even worse
issues and only completely disabling NCQ helps there, this will be
addressed in a separate patch.
Fixes: ca6bfcb2f6 ("libata: Enable queued TRIM for Samsung SSD 860")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475
Cc: stable@vger.kernel.org
Cc: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Print a list of features supported by a drive when it is configured in
ata_dev_configure() using the new function ata_dev_print_features().
The features printed are not already advertized and are: trusted
send-recev support, device attention support, device sleep support,
NCQ send-recv support and NCQ priority support.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-9-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support for the READ LOG PAGE DMA EXT command is indicated by words 119
and 120 of a device identify data. This is tested in
ata_read_log_page() with ata_id_has_read_log_dma_ext() and the
READ LOG PAGE DMA command used if the device reports supports for it.
However, some devices lie about this support and using the DMA version
of the command fails, generating the warning message "READ LOG DMA EXT
failed, trying PIO". Since READ LOG PAGE DMA EXT is an optional command,
this warning is not at all important but may be scary for the user.
Change ata_read_log_page() to suppres this warning and to print an
error message if both DMA and PIO attempts failed.
With this change, there is no need to print again an error message when
ata_read_log_page() returns an error. So simplify the users of this
function.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-8-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ata device flag ATA_DFLAG_NCQ_PRIO indicates if a device supports
the NCQ Priority feature while the ATA_DFLAG_NCQ_PRIO_ENABLE device
flag indicates if the feature is enabled. Enabling NCQ priority use is
controlled by the user through the device sysfs attribute
ncq_prio_enable. As a result, the ATA_DFLAG_NCQ_PRIO flag should not be
cleared when ATA_DFLAG_NCQ_PRIO_ENABLE is not set as the device still
supports the feature even after the user disables it. This leads to the
following cleanups:
- In ata_build_rw_tf(), set a command high priority bit based on the
ATA_DFLAG_NCQ_PRIO_ENABLE flag, not on the ATA_DFLAG_NCQ flag. That
is, set a command high priority only if the user enabled NCQ priority
use.
- In ata_dev_config_ncq_prio(), ATA_DFLAG_NCQ_PRIO should not be cleared
if ATA_DFLAG_NCQ_PRIO_ENABLE is not set. If the device does not
support NCQ priority, both ATA_DFLAG_NCQ_PRIO and
ATA_DFLAG_NCQ_PRIO_ENABLE must be cleared.
With the above ata_dev_config_ncq_prio() change, ATA_DFLAG_NCQ_PRIO flag
is set on device scan and revalidation. There is no need to trigger a
device revalidation in ata_ncq_prio_enable_store() when the user enables
the use of NCQ priority. Remove the revalidation code from that funciton
to simplify it. Also change the return value from -EIO to -EINVAL when a
user tries to enable NCQ priority for a device that does not support
this feature. While at it, also simplify ata_ncq_prio_enable_show().
Overall, there is no functional change introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-7-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the helper functions ata_dev_config_lba() and
ata_dev_config_chs() to configure the addressing capabilities of a
device. To control message printing in these new helpers, as well as
in ata_dev_configure() and in ata_hpa_resize(), add the helper function
ata_dev_print_info() to avoid open coding for the eh context
ATA_EHI_PRINTINFO flag in multiple functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-6-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the code to retrieve the device sleep capability and timings out of
ata_dev_configure() into the helper function ata_dev_config_devslp().
While at it, mark the device as supporting the device sleep capability
only if the sata settings page was retrieved successfully to ensure that
the timing information is correctly initialized.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-5-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The loop on entry of ata_host_start() may not initialize host->ops to a
non NULL value. The test on the host_stop field of host->ops must then
be preceded by a check that host->ops is not NULL.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some functions have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.
Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 130f4caf14 ("libata: Ensure ata_port probe has completed before
detach") may cause system freeze during suspend.
Using async_synchronize_full() in PM callbacks is wrong, since async
callbacks that are already scheduled may wait for not-yet-scheduled
callbacks, causes a circular dependency.
Instead of using big hammer like async_synchronize_full(), use async
cookie to make sure port probe are synced, without affecting other
scheduled PM callbacks.
Fixes: 130f4caf14 ("libata: Ensure ata_port probe has completed before detach")
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: John Garry <john.garry@huawei.com>
BugLink: https://bugs.launchpad.net/bugs/1867983
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The docs toolchain doesn't recognise this pattern:
@link->[hw_]sata_spd_limit
As it can't really process it. So, instead, let's mark it with
a literal block markup:
``link->[hw_]sata_spd_limit``
in order to get rid of the following warning:
./drivers/ata/libata-core.c:5974: WARNING: Unknown target name: "hw".
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9a21444df75c46095c4b1839d2061d19c9addcff.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Start separating SATA specific code from libata-core.c:
* move following functions to libata-sata.c:
- ata_tf_to_fis()
- ata_tf_from_fis()
- sata_link_scr_lpm()
- ata_slave_link_init()
- sata_lpm_ignore_phy_events()
* group above functions together in <linux/libata.h>
* include libata-sata.c in the build when CONFIG_SATA_HOST=y
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
37582 572 40 38194 9532 drivers/ata/libata-core.o
after:
36762 572 40 37374 91fe drivers/ata/libata-core.o
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
