Commit graph

36 commits

Author SHA1 Message Date
William Breathitt Gray
28e5d3bb03 iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
The ACCES 104-QUAD-8 is a general purpose quadrature encoder
counter/interface board. The 104-QUAD-8 is capable of monitoring the
outputs of eight encoders via four on-board LSI/CSI LS7266R1 24-bit
dual-axis quadrature counter chips. Core functions handled by the
LS7266R1, such as direction and total count, are available.

Performing a write to a counter's IIO_CHAN_INFO_RAW sets the counter and
also clears the counter's respective error flag. Although the counters
have a 25-bit range, only the lower 24 bits may be set, either directly
or via a counter's preset attribute. Interrupts are not supported by
this driver.

This driver adds IIO support for the ACCES 104-QUAD-8 and ACCES
104-QUAD-4. The base port addresses for the devices may be configured
via the base array module parameter.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-01 17:06:21 +01:00
Matt Ranostay
67e17300dc iio: potentiostat: add LMP91000 support
Add support for the LMP91000 potentiostat which is used for chemical
sensing applications.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-27 20:33:03 +01:00
Daniel Baluta
0f3a8c3f34 iio: Add support for creating IIO devices via configfs
This is similar with support for creating triggers via configfs.
Devices will be hosted under:
	* /config/iio/devices

We allow users to register "device types" under:
	* /config/iio/devices/<device_types>/

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04 11:43:54 +01:00
Matt Ranostay
4d33615df5 iio: light: add MAX30100 oximeter driver support
MAX30100 is an heart rate and pulse oximeter sensor that works using
two LEDS of different wavelengths, and detecting the light reflected
back.

This patchset adds support for both IR and RED LED channels which can
be processed in userspace to determine heart rate and blood oxygen
levels.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 12:14:37 +00:00
Daniel Baluta
b662f809d4 iio: core: Introduce IIO software triggers
A software trigger associates an IIO device trigger with a software
interrupt source (e.g: timer, sysfs). This patch adds the generic
infrastructure for handling software triggers.

Software interrupts sources are kept in a iio_trigger_types_list and
registered separately when the associated kernel module is loaded.

Software triggers can be created directly from drivers or from user
space via configfs interface.

To sum up, this dynamically creates "triggers" group to be found under
/config/iio/triggers and offers the possibility of dynamically
creating trigger types groups. The first supported trigger type is
"hrtimer" found under /config/iio/triggers/hrtimer.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03 18:19:27 +00:00
Daniel Baluta
8261d961d1 iio: core: Introduce IIO configfs support
This patch creates the IIO configfs root group. The group
will appear under <mount-point>/iio/, usually /config/iio.

We introduce configfs support in IIO in order to be able to easily
create IIO objects from userspace. The first supported IIO objects
are triggers introduced with next patches.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Tested-by: Matt Ranostay <matt.ranostay@intel>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03 18:19:24 +00:00
Cristina Opriceana
415f792447 iio: Move IIO Dummy Driver out of staging
This patch moves the reference IIO dummy driver from drivers/staging/iio
into a separate folder, drivers/iio/dummy and adds the proper Kconfig
and Makefile for it.

A new config menu entry called IIO dummy driver has also been added
in the Industrial I/O support menu, corresponding to this driver.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25 12:33:01 +00:00
Peter Rosin
c05dc2cce7 iio: mcp4531: Driver for Microchip digital potentiometers
Add support for Microchip digital potentiometers and rheostats
	MCP4531, MCP4532, MCP4551, MCP4552
	MCP4631, MCP4632, MCP4651, MCP4652

DEVICE   Wipers  Steps  Resistor Opts (kOhm)  i2c address
MCP4531  1       129    5, 10, 50, 100        010111x
MCP4532  1       129    5, 10, 50, 100        01011xx
MCP4551  1       257    5, 10, 50, 100        010111x
MCP4552  1       257    5, 10, 50, 100        01011xx
MCP4631  2       129    5, 10, 50, 100        0101xxx
MCP4632  2       129    5, 10, 50, 100        01011xx
MCP4651  2       257    5, 10, 50, 100        0101xxx
MCP4652  2       257    5, 10, 50, 100        01011xx

Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdf

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30 18:20:53 +01:00
Matt Ranostay
cd8d97774f iio: chemical: add SGX VZ89x VOC sensor support
Add support for VZ89X sensors VOC and CO2 reporting channels in
percentage which can be converted to part per million.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23 20:23:26 +01:00
Vladimir Barinov
735ad074ff iio: Support triggered events
Support triggered events.

This is useful for chips that don't have their own interrupt sources.
It allows to use generic/standalone iio triggers for those drivers.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-27 20:47:09 +01:00
Lars-Peter Clausen
8548a63b37 iio: Move generic buffer implementations to sub-directory
For generic IIO trigger implementations we already have a sub-directory,
but the generic buffer implementations currently reside in the IIO
top-level directory. The main reason is that things have historically grown
into this form.

With more generic buffer implementations on its way now is the perfect time
to clean this up and introduce a sub-directory for generic buffer
implementations to avoid too much clutter in the top-level directory.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:21 +01:00
Lars-Peter Clausen
050ee2f16e iio: Move callback buffer to its own module
Currently the IIO callback buffer implementation is directly built into the
IIO core module when enabled. Given that the callback buffer module is
standalone functionallity there is really no reason to do this. So move it
to its own module.

Also rename the source to follow the standard IIO module naming convention
as well as add a license notice to the file.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-15 14:50:30 +01:00
Matt Ranostay
24ddb0e4bb iio: Add AS3935 lightning sensor support
AS3935 chipset can detect lightning strikes and reports those back as
events and the estimated distance to the storm.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-16 18:00:32 +00:00
Srinivas Pandruvada
098d3beccf iio: hid-sensors: Added Inclinometer 3D
Added usage id processing for Inclinometer 3D. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03 20:31:59 +00:00
Harald Geyer
091a121b04 iio: Add new driver dht11
This driver handles DHT11 and DHT22 sensors.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03 20:22:30 +00:00
Peter Meerwald
a5db360998 iio: Restore alphabetic order in Makefile
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17 15:50:54 +01:00
Peter Meerwald
e5a6394218 iio: Add tmp006 IR temperature sensor
the TI TMP006 is a non-contact temperature sensor with I2C interface;
it measures the surface temperature of a distance object using a
thermopile to absorb IR energy emitted from the object

the sensor has two channels: IR sensor voltage (16-bit) and reference
temperature of the chip (14-bit); datasheet is here:
http://www.ti.com/lit/ds/symlink/tmp006.pdf

v2 (thanks to Grygorii Strashko, Lars-Peter Clausen, Jonathan Cameron
for review comments):
* power down device on driver remove
* use sign_extend32()
* style cleanup
* add comments what channel raw LSBs mean
* spelling of thermopile

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: LM Sensors <lm-sensors@lm-sensors.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17 15:50:53 +01:00
Greg Kroah-Hartman
6a48a9d5d7 Revert "iio: add configuration option for debug support"
This reverts commit 98a5e9e99d.

IIO, like the rest of the kernel, should rely on dynamic debugging, not
have a special config option for it.  That way, no user has to rebuild
their kernel to have debug messages, which is a good thing, let's not
revert back to the bad old days of the 2000's.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05 14:21:10 +08:00
Otavio Salvador
98a5e9e99d iio: add configuration option for debug support
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03 18:40:36 +01:00
Denis CIOCCA
217494e5b7 iio:pressure: Add STMicroelectronics pressures driver
This patch adds a generic pressure driver for STMicroelectronics
pressure sensors, currently it supports: LPS331AP.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-05 18:41:23 +01:00
Jonathan Cameron
e64e7d5c8c iio:trigger:sysfs Move out of staging.
This simple driver is rather useful. No issues about its interface
have been raised for some time hence the proposal to move it out
of staging.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22 22:16:48 +01:00
Lars-Peter Clausen
ec04cb048d staging:iio: Move adis library out of staging
Now that the adis library no longer depends on the sw_ring buffer implementation
we can move it out of staging.

While we are at it also sort the entries in the iio Kconfig and Makefile to be
in alphabetical order.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-19 22:22:12 +00:00
Jonathan Cameron
92d1079b28 staging:iio: add a callback buffer for in kernel push interface
This callback buffer is meant to be opaque to users, but basically
adds a very simple pass through buffer to which data may be
pushed when it is inserted into the buffer list.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-10 10:17:27 +00:00
Andreas Larsson
98f9c3c137 iio: Remove duplicates for light/ in Kconfig and Makefile
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 19:44:06 +01:00
srinivas pandruvada
ed5514c925 iio: hid-sensors: Added ALS
Added usage id processing for ALS. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.

Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06 19:24:15 +01:00
srinivas pandruvada
bc1d57ba06 iio: hid-sensors: Added Compass/Magnetometer 3D
Added usage id processing for Compass 3D. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.

Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06 19:22:32 +01:00
srinivas pandruvada
c5bdbef704 iio: hid-sensors: Added Gyroscope 3D
Added usage id processing for Gyroscope 3D. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.

Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06 19:21:40 +01:00
srinivas pandruvada
45fe6f7d00 iio: hid-sensors: Added accelerometer 3D
Added usage id processing for Accelerometer 3D.This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.

Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06 19:21:09 +01:00
srinivas pandruvada
73c6768b71 iio: hid-sensors: Common attribute and trigger
This patch contains the common code, which is used by all HID sensors.
There are some common set of attributes, which every hid sensor
needs it. This patch contains all such attributes processing.
Also the trigger interface is common among all HID sensors. This
patch contains common trigger functions utilized by all HID sensors.

Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06 19:20:11 +01:00
Lars-Peter Clausen
23f2d735a9 iio: Add helper function for initializing triggered buffers
Add a helper function for executing the common tasks which are usually involved
in setting up a simple software ringbuffer. It will allocate the buffer,
allocate the pollfunc and register the buffer.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18 17:26:09 -07:00
Lars-Peter Clausen
dbdc025bb2 staging:iio: Move DAC drivers out of staging
The IIO DAC drivers are in a reasonably good shape. They all make use of channel
spec and non of them provides non-documented sysfs attributes. Code style should
be OK as well, both checkpatch and coccicheck only report trivial issues.

So lets move the whole folder out of staging.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-05 14:02:25 +09:00
Michael Hennerich
cd1678f963 iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator
Changes since V1:

Apply Jonathan's review feedback:
Revise device status attribute names, and split documentation into two sections.
Add additional comments, and fix indention issues.
Remove pointless zero initializations.
Revise return value handling.
Simplify some code sections.
Split store_eeprom and sync handling into separate functions.
Use strtobool where applicable.
Document platform data structures using kernel-doc style.

Use dev_to_iio_dev
write_raw IIO_CHAN_INFO_FREQUENCY: Reject values <= 0
Make patch target drivers/iio

Changes since V2:

Use for_each_clear_bit() and __set_bit() where applicable.
Add descriptive comment.
Avoid temporary for struct regulator.
spi_device_id name use ad9523-1, ad9523 will be added later.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-04 21:19:05 -07:00
Johan Hovold
9c8ea1b29b iio: add LM3533 ambient-light-sensor driver
Add sub-driver for the ambient-light-sensor interface on National
Semiconductor / TI LM3533 lighting power chips.

The sensor interface can be used to control the LEDs and backlights of
the chip through defining five light zones and three sets of
corresponding output-current values.

The driver provides raw and mean adc readings along with the current
light zone through sysfs. A threshold event can be generated on zone
changes. The ALS-control output values can be set per zone for the three
current output channels.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-04 21:12:29 -07:00
Maxime Ripard
0e589d5fb3 ARM: AT91: IIO: Add AT91 ADC driver.
Add the ADC driver for Atmel's AT91SAM9G20-EK, AT91SAM9M10G45-EK
and AT91SAM9X5 family boards.

It has support for both software and hardware triggers.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 13:24:09 -07:00
Michael Hennerich
e71d42e03c iio: amplifiers: New driver for AD8366 Dual-Digital Variable Gain Amplifier
Changes since V1:

Apply review feedback:
	Introduce and use IIO_CHAN_INFO_HARDWAREGAIN
	Introduce and use Use IIO_VAL_INT_PLUS_MICRO_DB

Modify out of staging include paths.
Convert to new iio core API naming.

Changes since V2:

more sanity checking in write_raw

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 13:15:39 -07:00
Jonathan Cameron
a980e04609 IIO: Move the core files to drivers/iio
Take the core support + the kfifo buffer implentation out of
staging.  Whilst we are far from done in improving this subsystem
it is now at a stage where the userspae interfaces (provided by
the core) can be considered stable.

Drivers will follow over a longer time scale.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 11:11:38 -07:00