Since '!(0x5ea42b & 0xffff0000)' is always false, remove unreachable
block in 'rtl92d_dm_check_edca_turbo()' and convert EDCA limits to
constant variables. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231003043318.11370-1-dmantipov@yandex.ru
Since current TX power stuffs are for ax chips, add a suffix `_ax` to
them. Then, when requested to show txpwr table, select table according
to chip generation first.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231003015446.14658-7-pkshih@realtek.com
Wi-Fi 6 chips and Wi-Fi 7 chips have different register design for TX
power RU limit. We rename original setting stuffs with a suffix `_ax`,
concentrate related enum declaration in phy.h, and implement setting
flow for Wi-Fi 7 chips. Then, we set TX power RU limit according to
chip generation.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231003015446.14658-6-pkshih@realtek.com
Wi-Fi 6 chips and Wi-Fi 7 chips have different register design for
TX power limit. We rename original setting stuffs with a suffix `_ax`,
concentrate related enum declaration in phy.h, and implement setting
flow for Wi-Fi 7 chips. Then, we set TX power limit according to chip
generation.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231003015446.14658-5-pkshih@realtek.com
We have a register to control TX power of each rate section to increase
or decrease an offset. But, Wi-Fi 6 chips and Wi-Fi 7 chips have different
address and format for this control register. We rename original setting
stuffs with a suffix `_ax` and implement setting flow for Wi-Fi 7 chips.
Then, we set TX power offset according to chip generation.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231003015446.14658-4-pkshih@realtek.com
Wi-Fi 6 chips and Wi-Fi 7 chips have different register design for
TX power by rate. We rename original setting stuffs with a suffix
`_ax` and implement setting flow for Wi-Fi 7 chips. Then, we set TX
power by rate according to chip generation.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231003015446.14658-3-pkshih@realtek.com
There are two difference between Wi-Fi 6 and Wi-Fi 7 chips.
1. Address range of TX power control register
2. Checking code to get a TX power control register
So, separate the implementation of them, access according to
chip generation, and rename original things with a suffix `_ax`.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231003015446.14658-2-pkshih@realtek.com
- Timerlat is reporting thread interference time without thread noise
events occurrence. It was caused because the thread interference variable
was not reset after the analysis of a timerlat activation that did not
hit the threshold.
- The IRQ handler delay is estimated from the delta of the IRQ latency
reported by timerlat, and the timestamp from IRQ handler start event.
If the delta is near-zero, the drift from the external clock and the
trace event and/or the overhead can cause the value to be negative.
If the value is negative, print a zero-delay.
- IRQ handlers happening after the timerlat thread event but before
the stop tracing were being reported as IRQ that happened before the
*current* IRQ occurrence. Ignore Previous IRQ noise in this condition
because they are valid only for the *next* timerlat activation.
Timerlat user-space:
- Timerlat is stopping all user-space thread if a CPU becomes
offline. Do not stop the entire tool if a CPU is/become offline,
but only the thread of the unavailable CPU. Stop the tool only,
if all threads leave because the CPUs become/are offline.
man-pages:
- Fix command line example in timerlat hist man page.
-----BEGIN PGP SIGNATURE-----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=1BAc
-----END PGP SIGNATURE-----
Merge tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux
Pull rtla fixes from Daniel Bristot de Oliveira:
"rtla (Real-Time Linux Analysis) tool fixes.
Timerlat auto-analysis:
- Timerlat is reporting thread interference time without thread noise
events occurrence. It was caused because the thread interference
variable was not reset after the analysis of a timerlat activation
that did not hit the threshold.
- The IRQ handler delay is estimated from the delta of the IRQ
latency reported by timerlat, and the timestamp from IRQ handler
start event. If the delta is near-zero, the drift from the external
clock and the trace event and/or the overhead can cause the value
to be negative. If the value is negative, print a zero-delay.
- IRQ handlers happening after the timerlat thread event but before
the stop tracing were being reported as IRQ that happened before
the *current* IRQ occurrence. Ignore Previous IRQ noise in this
condition because they are valid only for the *next* timerlat
activation.
Timerlat user-space:
- Timerlat is stopping all user-space thread if a CPU becomes
offline. Do not stop the entire tool if a CPU is/become offline,
but only the thread of the unavailable CPU. Stop the tool only, if
all threads leave because the CPUs become/are offline.
man-pages:
- Fix command line example in timerlat hist man page"
* tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux:
rtla: fix a example in rtla-timerlat-hist.rst
rtla/timerlat: Do not stop user-space if a cpu is offline
rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample
rtla/timerlat_aa: Fix negative IRQ delay
rtla/timerlat_aa: Zero thread sum after every sample analysis
Jakub Kicinski says:
====================
ynl Makefile cleanup
While catching up on recent changes I noticed unexpected
changes to Makefiles in YNL. Indeed they were not working
as intended but the fixes put in place were not what I had
in mind :)
====================
Link: https://lore.kernel.org/r/20231003153416.2479808-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Makefile.deps provides direct includes in CFLAGS_$(obj).
We just need to rewrite the rules to make use of the extra
flags, no need to hard-include all of tools/include/uapi.
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231003153416.2479808-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As far as I can tell the normal Makefile dependency tracking
works, generated files get re-generated if the YAML was updated.
Let make do its job, don't force the re-generation.
make hardclean can be used to force regeneration.
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231003153416.2479808-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enum-as-flags can be used when enum declares bit positions but
we want to carry bitmask in an attribute. If the definition
is already provided as flags there's no need to indicate
the flag-iness of the attribute.
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231003153416.2479808-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Exit early if the list is empty.
2) splice the list into a local list,
so that we block hard irqs only once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231003181920.3280453-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when hb_interval is changed by users, it won't take effect
until the next expiry of hb timer. As the default value is 30s, users
have to wait up to 30s to wait its hb_interval update to work.
This becomes pretty bad in containers where a much smaller value is
usually set on hb_interval. This patch improves it by resetting the
hb timer immediately once the value of hb_interval is updated by users.
Note that we don't address the already existing 'problem' when sending
a heartbeat 'on demand' if one hb has just been sent(from the timer)
mentioned in:
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the 4-way handshake, the transport's state is set to ACTIVE in
sctp_process_init() when processing INIT_ACK chunk on client or
COOKIE_ECHO chunk on server.
In the collision scenario below:
192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885]
192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO]
192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021]
when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state,
sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it
creates a new association and sets its transport to ACTIVE then updates
to the old association in sctp_assoc_update().
However, in sctp_assoc_update(), it will skip the transport update if it
finds a transport with the same ipaddr already existing in the old asoc,
and this causes the old asoc's transport state not to move to ACTIVE
after the handshake.
This means if DATA retransmission happens at this moment, it won't be able
to enter PF state because of the check 'transport->state == SCTP_ACTIVE'
in sctp_do_8_2_transport_strike().
This patch fixes it by updating the transport in sctp_assoc_update() with
sctp_assoc_add_peer() where it updates the transport state if there is
already a transport with the same ipaddr exists in the old asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-10-03 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Yajun Deng aligns reporting of buffer exhaustion statistics to follow
documentation for i40e.
Jake removes undesired 'inline' from functions in iavf.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: remove "inline" functions from iavf_txrx.c
i40e: Add rx_missed_errors for buffer exhaustion
====================
Link: https://lore.kernel.org/r/20231003223610.2004976-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Chancellor says:
====================
Fix a couple recent instances of -Wincompatible-function-pointer-types-strict from ->mode_get() implementations
This series fixes a couple of instances of
-Wincompatible-function-pointer-types-strict that were introduced by a
recent series that added a new type of ops, struct dpll_device_ops,
along with implementations of the callback ->mode_get() that had a
mismatched mode type.
This warning is not currently enabled for any build but I am planning on
submitting a patch to add it to W=1 to prevent new instances of the
warning from popping up while we try and fix the existing instances in
other drivers.
This series is based on current net-next but if they need to go into
individual maintainer trees, please feel free to take the patches
individually.
====================
Link: https://lore.kernel.org/r/20231002-net-wifpts-dpll_mode_get-v1-0-a356a16413cf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch potential kCFI failures at build time rather
than run time due to incorrect function pointer types, there is a
warning due to a mismatch between the type of the mode parameter in
mlx5_dpll_device_mode_get() vs. what the function pointer prototype for
->mode_get() in 'struct dpll_device_ops' expects.
drivers/net/ethernet/mellanox/mlx5/core/dpll.c:141:14: error: incompatible function pointer types initializing 'int (*)(const struct dpll_device *, void *, enum dpll_mode *, struct netlink_ext_ack *)' with an expression of type 'int (const struct dpll_device *, void *, u32 *, struct netlink_ext_ack *)' (aka 'int (const struct dpll_device *, void *, unsigned int *, struct netlink_ext_ack *)') [-Werror,-Wincompatible-function-pointer-types-strict]
141 | .mode_get = mlx5_dpll_device_mode_get,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Change the type of the mode parameter in mlx5_dpll_device_mode_get() to
clear up the warning and avoid kCFI failures at run time.
Fixes: 496fd0a26b ("mlx5: Implement SyncE support using DPLL infrastructure")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231002-net-wifpts-dpll_mode_get-v1-2-a356a16413cf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch potential kCFI failures at build time rather
than run time due to incorrect function pointer types, there is a
warning due to a mismatch between the type of the mode parameter in
ptp_ocp_dpll_mode_get() vs. what the function pointer prototype for
->mode_get() in 'struct dpll_device_ops' expects.
drivers/ptp/ptp_ocp.c:4353:14: error: incompatible function pointer types initializing 'int (*)(const struct dpll_device *, void *, enum dpll_mode *, struct netlink_ext_ack *)' with an expression of type 'int (const struct dpll_device *, void *, u32 *, struct netlink_ext_ack *)' (aka 'int (const struct dpll_device *, void *, unsigned int *, struct netlink_ext_ack *)') [-Werror,-Wincompatible-function-pointer-types-strict]
4353 | .mode_get = ptp_ocp_dpll_mode_get,
| ^~~~~~~~~~~~~~~~~~~~~
1 error generated.
Change the type of the mode parameter in ptp_ocp_dpll_mode_get() to
clear up the warning and avoid kCFI failures at run time.
Fixes: 09eeb3aecc ("ptp_ocp: implement DPLL ops")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231002-net-wifpts-dpll_mode_get-v1-1-a356a16413cf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hayes Wang says:
====================
r8152: modify rx_bottom
v3:
For patch #1, this patch is replaced. The new patch only break the loop,
and keep that the driver would queue the rx packets.
For patch #2, modify the code depends on patch #1. For work_down < budget,
napi_get_frags() and napi_gro_frags() would be used. For the others,
nothing is changed.
v2:
For patch #1, add comment, update commit message, and add Fixes tag.
v1:
These patches are used to improve rx_bottom().
====================
Link: https://lore.kernel.org/r/20230926111714.9448-432-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A bulk transfer of the USB may contain many packets. And, the total
number of the packets in the bulk transfer may be more than budget.
Originally, only budget packets would be handled by napi_gro_receive(),
and the other packets would be queued in the driver for next schedule.
This patch would break the loop about getting next bulk transfer, when
the budget is exhausted. That is, only the current bulk transfer would
be handled, and the other bulk transfers would be queued for next
schedule. Besides, the packets which are more than the budget in the
current bulk trasnfer would be still queued in the driver, as the
original method.
In addition, a bulk transfer wouldn't contain more than 400 packets, so
the check of queue length is unnecessary. Therefore, I replace it with
WARN_ON_ONCE().
Fixes: cf74eb5a5b ("eth: r8152: try to use a normal budget")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230926111714.9448-433-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees Cook says:
====================
chelsio: Annotate structs with __counted_by
This annotates several chelsio structures with the coming __counted_by
attribute for bounds checking of flexible arrays at run-time. For more details,
see commit dd06e72e68 ("Compiler Attributes: Add __counted_by macro").
====================
Link: https://lore.kernel.org/r/20230929181042.work.990-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct smt_data.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230929181149.3006432-5-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct sched_table.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230929181149.3006432-4-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cxgb4_tc_u32_table.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230929181149.3006432-3-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct clip_tbl.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230929181149.3006432-2-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct l2t_data.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230929181149.3006432-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit fixes poor delayed ACK behavior that can cause poor TCP
latency in a particular boundary condition: when an application makes
a TCP socket write that is an exact multiple of the MSS size.
The problem is that there is painful boundary discontinuity in the
current delayed ACK behavior. With the current delayed ACK behavior,
we have:
(1) If an app reads data when > 1*MSS is unacknowledged, then
tcp_cleanup_rbuf() ACKs immediately because of:
tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss ||
(2) If an app reads all received data, and the packets were < 1*MSS,
and either (a) the app is not ping-pong or (b) we received two
packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause
of:
((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) ||
((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) &&
!inet_csk_in_pingpong_mode(sk))) &&
(3) *However*: if an app reads exactly 1*MSS of data,
tcp_cleanup_rbuf() does not send an immediate ACK. This is true
even if the app is not ping-pong and the 1*MSS of data had the PSH
bit set, suggesting the sending application completed an
application write.
Thus if the app is not ping-pong, we have this painful case where
>1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a
write whose last skb is an exact multiple of 1*MSS can get a 40ms
delayed ACK. This means that any app that transfers data in one
direction and takes care to align write size or packet size with MSS
can suffer this problem. With receive zero copy making 4KB MSS values
more common, it is becoming more common to have application writes
naturally align with MSS, and more applications are likely to
encounter this delayed ACK problem.
The fix in this commit is to refine the delayed ACK heuristics with a
simple check: immediately ACK a received 1*MSS skb with PSH bit set if
the app reads all data. Why? If an skb has a len of exactly 1*MSS and
has the PSH bit set then it is likely the end of an application
write. So more data may not be arriving soon, and yet the data sender
may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we
set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send
an ACK immediately if the app reads all of the data and is not
ping-pong. Note that this logic is also executed for the case where
len > MSS, but in that case this logic does not matter (and does not
hurt) because tcp_cleanup_rbuf() will always ACK immediately if the
app reads data and there is more than an MSS of unACKed data.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Guo <guoxin0309@gmail.com>
Link: https://lore.kernel.org/r/20231001151239.1866845-2-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit fixes quick-ack counting so that it only considers that a
quick-ack has been provided if we are sending an ACK that newly
acknowledges data.
The code was erroneously using the number of data segments in outgoing
skbs when deciding how many quick-ack credits to remove. This logic
does not make sense, and could cause poor performance in
request-response workloads, like RPC traffic, where requests or
responses can be multi-segment skbs.
When a TCP connection decides to send N quick-acks, that is to
accelerate the cwnd growth of the congestion control module
controlling the remote endpoint of the TCP connection. That quick-ack
decision is purely about the incoming data and outgoing ACKs. It has
nothing to do with the outgoing data or the size of outgoing data.
And in particular, an ACK only serves the intended purpose of allowing
the remote congestion control to grow the congestion window quickly if
the ACK is ACKing or SACKing new data.
The fix is simple: only count packets as serving the goal of the
quickack mechanism if they are ACKing/SACKing new data. We can tell
whether this is the case by checking inet_csk_ack_scheduled(), since
we schedule an ACK exactly when we are ACKing/SACKing new data.
Fixes: fc6415bcb0 ("[TCP]: Fix quick-ack decrementing with TSO.")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YLDi
-----END PGP SIGNATURE-----
Merge tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter patches for net
First patch resolves a regression with vlan header matching, this was
broken since 6.5 release. From myself.
Second patch fixes an ancient problem with sctp connection tracking in
case INIT_ACK packets are delayed. This comes with a selftest, both
patches from Xin Long.
Patch 4 extends the existing nftables audit selftest, from
Phil Sutter.
Patch 5, also from Phil, avoids a situation where nftables
would emit an audit record twice. This was broken since 5.13 days.
Patch 6, from myself, avoids spurious insertion failure if we encounter an
overlapping but expired range during element insertion with the
'nft_set_rbtree' backend. This problem exists since 6.2.
* tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
netfilter: nf_tables: Deduplicate nft_register_obj audit logs
selftests: netfilter: Extend nft_audit.sh
selftests: netfilter: test for sctp collision processing in nf_conntrack
netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp
netfilter: nft_payload: rebuild vlan header on h_proto access
====================
Link: https://lore.kernel.org/r/20231004141405.28749-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ALU2
-----END PGP SIGNATURE-----
Merge tag 'nf-next-23-09-28' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
First patch, from myself, is a bug fix. The issue (connect timeout) is
ancient, so I think its safe to give this more soak time given the esoteric
conditions needed to trigger this.
Also updates the existing selftest to cover this.
Add netlink extacks when an update references a non-existent
table/chain/set. This allows userspace to provide much better
errors to the user, from Pablo Neira Ayuso.
Last patch adds more policy checks to nf_tables as a better
alternative to the existing runtime checks, from Phil Sutter.
* tag 'nf-next-23-09-28' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: Utilize NLA_POLICY_NESTED_ARRAY
netfilter: nf_tables: missing extended netlink error in lookup functions
selftests: netfilter: test nat source port clash resolution interaction with tcp early demux
netfilter: nf_nat: undo erroneous tcp edemux lookup after port clash
====================
Link: https://lore.kernel.org/r/20230928144916.18339-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems that tipc_crypto_key_revoke() could be be invoked by
wokequeue tipc_crypto_work_rx() under process context and
timer/rx callback under softirq context, thus the lock acquisition
on &tx->lock seems better use spin_lock_bh() to prevent possible
deadlock.
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
tipc_crypto_work_rx() <workqueue>
--> tipc_crypto_key_distr()
--> tipc_bcast_xmit()
--> tipc_bcbase_xmit()
--> tipc_bearer_bc_xmit()
--> tipc_crypto_xmit()
--> tipc_ehdr_build()
--> tipc_crypto_key_revoke()
--> spin_lock(&tx->lock)
<timer interrupt>
--> tipc_disc_timeout()
--> tipc_bearer_xmit_skb()
--> tipc_crypto_xmit()
--> tipc_ehdr_build()
--> tipc_crypto_key_revoke()
--> spin_lock(&tx->lock) <deadlock here>
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Link: https://lore.kernel.org/r/20230927181414.59928-1-dg573847474@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the
driver does not enable the clock in stm32_dwmac_init() if the device was
suspended. The problem is that this same code runs on STM32 MCUs, which
do disable clk_rx during suspend, causing the clock to never be
re-enabled on resume.
This patch adds a variant flag to indicate that clk_rx remains enabled
during suspend, and uses this to decide whether to enable the clock in
stm32_dwmac_init() if the device was suspended.
This approach fixes this specific bug with limited opportunity for
unintended side-effects, but I have a follow up patch that will refactor
the clock configuration and hopefully make it less error prone.
Fixes: 6528e02cc9 ("net: ethernet: stmmac: add adaptation for stm32mp157c.")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a copy and paste error so this uses a valid pointer instead of
an error pointer.
Fixes: 09eeb3aecc ("ptp_ocp: implement DPLL ops")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/5c581336-0641-48bd-88f7-51984c3b1f79@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the mt753x_phylink_pcs_link_up() function for two reasons:
1) priv->pcs[i].pcs.neg_mode is set true, meaning it doesn't take a
MLO_AN_FIXED anymore, but one of PHYLINK_PCS_NEG_*. However, this
is inconsequential due to...
2) priv->pcs[port].pcs.ops is always initialised to point at
mt7530_pcs_ops, which does not have a pcs_link_up() member.
So, let's remove mt753x_phylink_pcs_link_up() entirely.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1qlTQS-008BWe-Va@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The COPS Appletalk support is very old, never said to actually work
properly, and the firmware code for the devices are under a very suspect
license. Remove it all to clear up the license issue, if it is still
needed and actually used by anyone, we can add it back later once the
license is cleared up.
Reported-by: Prarit Bhargava <prarit@redhat.com>
Cc: jschlst@samba.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230927090029.44704-2-gregkh@linuxfoundation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to a small omission, the offload_failed flag is missing from ipv4
fibmatch results. Make sure it is set correctly.
The issue can be witnessed using the following commands:
echo "1 1" > /sys/bus/netdevsim/new_device
ip link add dummy1 up type dummy
ip route add 192.0.2.0/24 dev dummy1
echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload
ip route add 198.51.100.0/24 dev dummy1
ip route
# 192.168.15.0/24 has rt_trap
# 198.51.100.0/24 has rt_offload_failed
ip route get 192.168.15.1 fibmatch
# Result has rt_trap
ip route get 198.51.100.1 fibmatch
# Result differs from the route shown by `ip route`, it is missing
# rt_offload_failed
ip link del dev dummy1
echo 1 > /sys/bus/netdevsim/del_device
Fixes: 36c5100e85 ("IPv4: Add "offload failed" indication to routes")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This kselftest fixes update for Linux 6.6-rc5 consists of one single
fix to Makefile to fix the incorrect TARGET name for uevent test.
-----BEGIN PGP SIGNATURE-----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=W9Tx
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to Makefile to fix the incorrect TARGET name for uevent
test"
* tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix wrong TARGET in kselftest top level Makefile
to list individually. Many stack fixes, even rfkill
(found by simulation and the new eevdf scheduler)!
Also a bigger maintainers file cleanup, to remove old
and redundant information.
-----BEGIN PGP SIGNATURE-----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=OL/S
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a collection of fixes this time, really too many
to list individually. Many stack fixes, even rfkill
(found by simulation and the new eevdf scheduler)!
Also a bigger maintainers file cleanup, to remove old
and redundant information.
* tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits)
wifi: iwlwifi: mvm: Fix incorrect usage of scan API
wifi: mac80211: Create resources for disabled links
wifi: cfg80211: avoid leaking stack data into trace
wifi: mac80211: allow transmitting EAPOL frames with tainted key
wifi: mac80211: work around Cisco AP 9115 VHT MPDU length
wifi: cfg80211: Fix 6GHz scan configuration
wifi: mac80211: fix potential key leak
wifi: mac80211: fix potential key use-after-free
wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
wifi: brcmfmac: Replace 1-element arrays with flexible arrays
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM
rfkill: sync before userspace visibility/changes
wifi: mac80211: fix mesh id corruption on 32 bit systems
wifi: cfg80211: add missing kernel-doc for cqm_rssi_work
wifi: cfg80211: fix cqm_config access race
wifi: iwlwifi: mvm: Fix a memory corruption issue
wifi: iwlwifi: Ensure ack flag is properly cleared.
wifi: iwlwifi: dbg_ini: fix structure packing
iwlwifi: mvm: handle PS changes in vif_cfg_changed
...
====================
Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The imx8dl FEC has the same programming model as the one on the imx8qxp.
Add the imx8dl compatible string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926111017.320409-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The recent support for DPLL introduced by commit 8a3a565ff2 ("ice: add
admin commands to access cgu configuration") and commit d7999f5ea6 ("ice:
implement dpll interface to control cgu") broke linking the ice driver if
CONFIG_PTP_1588_CLOCK=n:
ld: vmlinux.o: in function `ice_init_feature_support':
(.text+0x8702b8): undefined reference to `ice_is_phy_rclk_present'
ld: (.text+0x8702cd): undefined reference to `ice_is_cgu_present'
ld: (.text+0x8702d9): undefined reference to `ice_is_clock_mux_present_e810t'
ld: vmlinux.o: in function `ice_dpll_init_info_direct_pins':
ice_dpll.c:(.text+0x894167): undefined reference to `ice_cgu_get_pin_freq_supp'
ld: ice_dpll.c:(.text+0x894197): undefined reference to `ice_cgu_get_pin_name'
ld: ice_dpll.c:(.text+0x8941a8): undefined reference to `ice_cgu_get_pin_type'
ld: vmlinux.o: in function `ice_dpll_update_state':
ice_dpll.c:(.text+0x894494): undefined reference to `ice_get_cgu_state'
ld: vmlinux.o: in function `ice_dpll_init':
(.text+0x8953d5): undefined reference to `ice_get_cgu_rclk_pin_info'
The first commit broke things by calling functions in
ice_init_feature_support that are compiled as part of ice_ptp_hw.o,
including:
* ice_is_phy_rclk_present
* ice_is_clock_mux_present_e810t
* ice_is_cgU_present
The second commit continued the break by calling several CGU functions
defined in ice_ptp_hw.c in the DPLL code.
Because the ice_dpll.c file is compiled unconditionally, it will not
link when CONFIG_PTP_1588_CLOCK=n.
It might be possible to break this dependency and expose those functions
without CONFIG_PTP_1588_CLOCK, but that is not clear to me.
For the DPLL case, simply compile ice_dpll.o only when we have
CONFIG_PTP_1588_CLOCK. Add stub no-op implementation of ice_dpll_init() and
ice_dpll_uninit() when CONFIG_PTP_1588_CLOCK=n into ice_dpll.h
The other functions are part of checking the netlist to see if hardware
features are enabled. These checks don't really belong in ice_ptp_hw.c, and
make more sense as part of the ice_common.c file. We already have
ice_is_gps_in_netlist() in ice_common.c which is doing a similar check.
Move the functions into ice_common.c and rename them to have the similar
postfix of "in_netlist()" to be more expressive of what they are actually
checking.
This also makes the ice_find_netlist_node only called from within
ice_common.c, so its safe to mark it static and stop declaring it in the
ice_common.h header as well.
Fixes: 8a3a565ff2 ("ice: add admin commands to access cgu configuration")
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309191214.TaYEct4H-lkp@intel.com
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20231002185132.1575271-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZRqk1wAKCRDbK58LschI
g8GRAQC4E0bw6BTFRl0b3MxvpZES6lU0BUtX2gKVK4tLZdXw/wEAmTlBXQqNzF3b
BkCQknVbFTSw/8l8pzUW123Fb46wUAQ=
=E3hd
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-02
We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).
The main changes are:
1) Fix BPF verifier to reset backtrack_state masks on global function
exit as otherwise subsequent precision tracking would reuse them,
from Andrii Nakryiko.
2) Several sockmap fixes for available bytes accounting,
from John Fastabend.
3) Reject sk_msg egress redirects to non-TCP sockets given this
is only supported for TCP sockets today, from Jakub Sitnicki.
4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
limits with BPF_F_BEFORE directive, from Daniel Borkmann
and Nikolay Aleksandrov.
5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
size_index for selecting a bpf_mem_cache, from Hou Tao.
6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
from Song Liu.
7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
from Leon Hwang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use kmalloc_size_roundup() to adjust size_index
selftest/bpf: Add various selftests for program limits
bpf, mprog: Fix maximum program check on mprog attachment
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
bpf, sockmap: Add tests for MSG_F_PEEK
bpf, sockmap: Do not inc copied_seq when PEEK flag set
bpf: tcp_read_skb needs to pop skb regardless of seq
bpf: unconditionally reset backtrack_state masks on global func exit
bpf: Fix tr dereferencing
selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================
Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nft_rbtree_gc_elem() walks back and removes the end interval element that
comes before the expired element.
There is a small chance that we've cached this element as 'rbe_ge'.
If this happens, we hold and test a pointer that has been queued for
freeing.
It also causes spurious insertion failures:
$ cat test-testcases-sets-0044interval_overlap_0.1/testout.log
Error: Could not process rule: File exists
add element t s { 0 - 2 }
^^^^^^
Failed to insert 0 - 2 given:
table ip t {
set s {
type inet_service
flags interval,timeout
timeout 2s
gc-interval 2s
}
}
The set (rbtree) is empty. The 'failure' doesn't happen on next attempt.
Reason is that when we try to insert, the tree may hold an expired
element that collides with the range we're adding.
While we do evict/erase this element, we can trip over this check:
if (rbe_ge && nft_rbtree_interval_end(rbe_ge) && nft_rbtree_interval_end(new))
return -ENOTEMPTY;
rbe_ge was erased by the synchronous gc, we should not have done this
check. Next attempt won't find it, so retry results in successful
insertion.
Restart in-kernel to avoid such spurious errors.
Such restart are rare, unless userspace intentionally adds very large
numbers of elements with very short timeouts while setting a huge
gc interval.
Even in this case, this cannot loop forever, on each retry an existing
element has been removed.
As the caller is holding the transaction mutex, its impossible
for a second entity to add more expiring elements to the tree.
After this it also becomes feasible to remove the async gc worker
and perform all garbage collection from the commit path.
Fixes: c9e6978e27 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <fw@strlen.de>
