Add IS1 VCAP port keyset configuration for lan966x and also update debug
fs support to show the keyset configuration.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide IS1 (ingress stage 1) VCAP model for lan966x.
This provides classification actions for lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NVMEM layouts are no longer registered early, and thus may not yet be
available when Ethernet drivers (or any other consumer) probe, leading
to possible probe deferrals errors. Forward the error code if this
happens. All other errors being discarded, the driver will eventually
use a random MAC address if no other source was considered valid (no
functional change on this regard).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/20230307192927.512757-1-miquel.raynal@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The filename "wangxun" sorts between "intel" and "xscale", but
xscale/Kconfig contains "Intel XScale" prompts, so Wangxun ends up in the
wrong place in the config front-ends.
Move wangxun/Kconfig so the Wangxun devices appear in order in the user
interface.
Fixes: 3ce7547e5b ("net: txgbe: Add build support for txgbe")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307221051.890135-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-07 (igc)
This series contains updates to igc driver only.
Muhammad adds tracking and reporting of QBV config errors.
Tan Tee adds support for configuring max SDU for each Tx queue.
Sasha removes check for alternate media as only one media type is
supported.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Clean up and optimize watchdog task
igc: offload queue max SDU from tc-taprio
igc: Add qbv_config_change_errors counter
====================
Link: https://lore.kernel.org/r/20230307221332.3997881-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
Netfilter updates for net-next
1. nf_tables 'brouting' support, from Sriram Yagnaraman.
2. Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header, from Xin Long.
This comes with a test BIG TCP test case, added to
tools/testing/selftests/net/.
3. Fix spelling and indentation in conntrack, from Jeremy Sowden.
* 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nat: fix indentation of function arguments
netfilter: conntrack: fix typo
selftests: add a selftest for big tcp
netfilter: use nf_ip6_check_hbh_len in nf_ct_skb_network_trim
netfilter: move br_nf_check_hbh_len to utils
netfilter: bridge: move pskb_trim_rcsum out of br_nf_check_hbh_len
netfilter: bridge: check len before accessing more nh data
netfilter: bridge: call pskb_may_pull in br_nf_check_hbh_len
netfilter: bridge: introduce broute meta statement
====================
Link: https://lore.kernel.org/r/20230308193033.13965-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neigh_lookup_nodev isn't used in the kernel after removal
of DECnet. So let's remove it.
Fixes: 1202cdd665 ("Remove DECnet support from kernel")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230308121230.5354-1-nick.alcock@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230308121230.5354-2-nick.alcock@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XVs0
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential out of bound write of zeroes in HID core with a
specially crafted uhid device (Lee Jones)
- fix potential use-after-free in work function in intel-ish-hid (Reka
Norman)
- selftests config fixes (Benjamin Tissoires)
- few device small fixes and support
* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
selftest: hid: fix hid_bpf not set in config
HID: uhid: Over-ride the default maximum data buffer value with our own
HID: core: Provide new max_buffer_size attribute to over-ride the default
- Fix systems with memory at end of 32-bit address space,
- Fix initrd on systems where memory does not start at address zero,
- Fix 68030 handling of bus errors for addresses in exception tables.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZAmqMBUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XAi4AEA2hE4fkPIzobqWXZrLblAYnyy4vIP
S5TeXusdpMahnBEA/36mt2bFZFthHnfvQK/4YjBGDIQPV8+DOIt2YiYFZwIL
=ssyX
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
- Fix systems with memory at end of 32-bit address space
- Fix initrd on systems where memory does not start at address zero
- Fix 68030 handling of bus errors for addresses in exception tables
* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Only force 030 bus error if PC not in exception table
m68k: mm: Move initrd phys_to_virt handling after paging_init()
m68k: mm: Fix systems with memory at end of 32-bit address space
We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-07 (ice)
This series contains updates to ice driver only.
Dave removes masking from pfcena field as it was incorrectly preventing
valid traffic classes from being enabled.
Michal resolves various smatch issues such as not propagating error
codes and returning 0 explicitly.
Arnd Bergmann resolves gcc-9 warning for integer overflow.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ethernet: ice: avoid gcc-9 integer overflow warning
ice: don't ignore return codes in VSI related code
ice: Fix DSCP PFC TLV creation
====================
Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xin Long says:
====================
sctp: add another two stream schedulers
All SCTP stream schedulers are defined in rfc8260#section-3,
First-Come First-Served, Round-Robin and Priority-Based
Schedulers are already added in kernel.
This patchset adds another two schedulers: Fair Capacity
Scheduler and Weighted Fair Queueing Scheduler.
Note that the left one "Round-Robin Scheduler per Packet"
Scheduler is not implemented by this patch, as it's still
intrusive to be added in the current SCTP kernel code.
====================
Link: https://lore.kernel.org/r/cover.1678224012.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As it says in rfc8260#section-3.6 about the weighted fair queueing
scheduler:
A Weighted Fair Queueing scheduler between the streams is used. The
weight is configurable per outgoing SCTP stream. This scheduler
considers the lengths of the messages of each stream and schedules
them in a specific way to use the capacity according to the given
weights. If the weight of stream S1 is n times the weight of stream
S2, the scheduler should assign to stream S1 n times the capacity it
assigns to stream S2. The details are implementation dependent.
Interleaving user messages allows for a better realization of the
capacity usage according to the given weights.
This patch adds Weighted Fair Queueing Scheduler actually based on
the code of Fair Capacity Scheduler by adding fc_weight into struct
sctp_stream_out_ext and taking it into account when sorting stream->
fc_list in sctp_sched_fc_sched() and sctp_sched_fc_dequeue_done().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As it says in rfc8260#section-3.5 about the fair capacity scheduler:
A fair capacity distribution between the streams is used. This
scheduler considers the lengths of the messages of each stream and
schedules them in a specific way to maintain an equal capacity for
all streams. The details are implementation dependent. interleaving
user messages allows for a better realization of the fair capacity
usage.
This patch adds Fair Capacity Scheduler based on the foundations added
by commit 5bbbbe32a4 ("sctp: introduce stream scheduler foundations"):
A fc_list and a fc_length are added into struct sctp_stream_out_ext and
a fc_list is added into struct sctp_stream. In .enqueue, when there are
chunks enqueued into a stream, this stream will be linked into stream->
fc_list by its fc_list ordered by its fc_length. In .dequeue, it always
picks up the 1st skb from stream->fc_list. In .dequeue_done, fc_length
is increased by chunk's len and update its location in stream->fc_list
according to the its new fc_length.
Note that when the new fc_length overflows in .dequeue_done, instead of
resetting all fc_lengths to 0, we only reduced them by U32_MAX / 4 to
avoid a moment of imbalance in the scheduling, as Marcelo suggested.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
Various mtk_eth_soc cleanups
Here are a number of patches that do a bit of cleanup to mtk_eth_soc.
The first patch cleans up mtk_gmac0_rgmii_adjust(), which is the
troublesome function preventing the driver becoming a post-March2020
phylink driver. It doesn't solve that problem, merely makes the code
easier to follow by getting rid of repeated tenary operators.
The second patch moves the check for DDR2 memory to the initialisation
of phylink's supported_interfaces - if TRGMII is not possible for some
reason, we should not be erroring out in phylink MAC operations when
that can be determined prior to phylink creation.
The third patch removes checks from mtk_mac_config() that are done
when initialising supported_interfaces - phylink will not call
mtk_mac_config() with an interface that was not marked as supported,
so these checks are redundant.
The last patch removes the remaining vestiges of REVMII and RMII
support, which appears to be entirely unused.
These shouldn't conflict with Daniel's patch set, but if they do I
will rework as appropriate.
====================
Link: https://lore.kernel.org/r/ZAdj9qUXcHUsK7Gt@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since the conversion of mtk_eth_soc to phylink's supported_interfaces
bitmap, these two modes have not been selectable. No one has raised
this as an issue. Checking the in-kernel DT files, none of them use
either of these modes with this hardware.
Daniel Golle concurs:
A quick grep through the device trees of the more than 650 ramips and
mediatek boards we support in OpenWrt has revealed that *none* of them
uses either reduced-MII or reverse-MII PHY modes. I could imaging that
some more specialized ramips boards may use the RMII 100M PHY mode to
connect with exotic PHYs for industrial or automotive applications
(think: for 100BASE-T1 PHY connected via RMII). I have never seen or
touched such boards, but there are hints that they do exist.
For reverse-MII there are cases in which the Ralink SoC (Rt305x, for
example) is used in iNIC mode, ie. connected as a PHY to another SoC,
and running only a minimal firmware rather than running Linux. Due to
the lack of external DRAM for the Ralink SoC on this kind of boards,
the Ralink SoC there will anyway never be able to boot Linux.
I've seen this e.g. in multimedia devices like early WiFi-connected
not-yet-so-smart TVs.
Consequently, the conclusion is that no one uses these modes with this
hardware, so we might as well drop support for them.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mtk_mac_config() checks that the interface mode is permitted for the
capabilities, but we already do these checks in mtk_add_mac() when
initialising phylink's supported_interfaces bitmap. Remove the
unnecessary tests.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If TRGMII mode is not permitted when using DDR2 mode, we should handle
that when setting up phylink's ->supported_interfaces so phylink knows
that this is not supported by the hardware. Move this check to
mtk_add_mac().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Get rid of the multiple tenary operators in mtk_gmac0_rgmii_adjust()
replacing them with a single if(), thus making the code easier to read.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bjorn Helgaas says:
====================
PCI/AER: Remove redundant Device Control Error Reporting Enable
From: Bjorn Helgaas <bhelgaas@google.com>
Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is native"),
which appeared in v6.0, the PCI core has enabled PCIe error reporting for
all devices during enumeration.
Remove driver code to do this and remove unnecessary includes of
<linux/aer.h> from several other drivers.
Intel folks, sorry that I missed removing the <linux/aer.h> includes in the
first series.
====================
Link: https://lore.kernel.org/r/20230307181940.868828-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Cc: Mengyuan Lou <mengyuanlou@net-swift.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Cc: Mengyuan Lou <mengyuanlou@net-swift.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
51b35a454e ("sfc: skeleton EF100 PF driver") added a call to
pci_disable_pcie_error_reporting() in ef100_pci_remove().
Remove this call since there's no apparent reason to disable error
reporting when it was not previously enabled.
Note that since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core enables PCIe error reporting for all devices during
enumeration, so the driver doesn't need to do it itself.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shahed Shaikh <shshaikh@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Veerasenareddy Burru <vburru@marvell.com>
Cc: Abhijit Ayarekar <aayarekar@marvell.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Also note that the driver only called these for NX_IS_REVISION_P3 devices,
so since f26e58bf6f, error reporting has been enabled for devices other
than NX_IS_REVISION_P3.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Rahul Verma <rahulv@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
