Avoid adding backend specific data to the tracepoints outside of
the LOW_LEVEL_TRACEPOINTS kernel config protection. These bits of
information are bound to change depending on the selected submission
method per platform and are not necessarily possible to maintain in
the future.
Fixes: dbf9da8d55 ("drm/i915/guc: Add trace point for GuC submit")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027093255.66489-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 64512a66b6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The intermediate value 1000000 * 10 * 9671 overflows 32 bits, so force
promotion to a bigger type.
From the logs:
[drm:intel_dp_compute_config [i915]] DP link rate required 3657063 available -580783288
v2: Use mul_u32_u32() (Ville)
Fixes: 48efd014f0 ("drm/i915/dp: add max data rate calculation for UHBR rates")
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026093407.11381-1-jani.nikula@intel.com
(cherry picked from commit bf0d608b55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the const that was accidentally left out from the vtables.
Fixes: 6b4cd9cba6 ("drm/i915: constify the cdclk vtable")
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021133408.32166-1-jani.nikula@intel.com
(cherry picked from commit 877d074939)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit 05734ca2a8.
It's not graceful, instead it leads to boot time warning splats in the
case it is supposed to handle gracefully. Apparently the BIOS/GOP
enabling the port we end up skipping leads to state readout
problems. Back to the drawing board.
References: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_21255/bat-adlp-4/boot0.txt
Fixes: 05734ca2a8 ("drm/i915/bios: gracefully disable dual eDP for now")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019114334.24643-1-jani.nikula@intel.com
(cherry picked from commit 171c555c2c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Atm until the DPCD for a connector is read the max link rate and lane
count params are invalid. If the connector is modeset, in
intel_dp_compute_config(), intel_dp_common_len_rate_limit(max_link_rate)
will return 0, leading to a intel_dp->common_rates[-1] access.
Fix the above by making sure the max link params are always valid.
The above access leads to an undefined behaviour by definition, though
not causing a user visible problem to my best knowledge, see the previous
patch why. Nevertheless it is an undefined behaviour and it triggers a
BUG() in CONFIG_UBSAN builds, hence CC:stable.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-4-imre.deak@intel.com
(cherry picked from commit 9ad87de473)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a
intel_dp->common_rates[-1] (*)
access, which is an undefined behaviour, in the following cases:
- In intel_dp_sync_state(), if the encoder is enabled without a sink
connected to the encoder's connector (BIOS enabled a monitor, but the
user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
a sink connected on it, but before probing the connector first.
To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.
I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.
As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
v2: Clear the default sink rates, before initializing these for eDP.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com
(cherry picked from commit 3f61ef9777)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commits ddab8bd788 ("drm/amd/display: Fix two cursor duplication
when using overlay") and e7d9560aea ("Revert "drm/amd/display: Fix overlay
validation by considering cursors"").
tl;dr ChromeOS uses the atomic interface for everything except the cursor. This
is incorrect and forces amdgpu to disable some hardware features. Let's revert
the ChromeOS-specific workaround in mainline and allow the Chrome team to keep
it internally in their own tree.
See [1] for more details. This patch is an alternative to [2], which added
ChromeOS detection.
[1]: https://lore.kernel.org/amd-gfx/JIQ_93_cHcshiIDsrMU1huBzx9P9LVQxucx8hQArpQu7Wk5DrCl_vTXj_Q20m_L-8C8A5dSpNcSJ8ehfcCrsQpfB5QG_Spn14EYkH9chtg0=@emersion.fr/
[2]: https://lore.kernel.org/amd-gfx/20211011151609.452132-1-contact@emersion.fr/
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: ddab8bd788 ("drm/amd/display: Fix two cursor duplication when using overlay")
Fixes: e7d9560aea ("Revert "drm/amd/display: Fix overlay validation by considering cursors"")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On arcturus, not all platforms use PMFW based fan control. On such
ASICs fan control by PMFW will be disabled in PPTable. Disable hwmon
knobs for fan control also as it is not possible to report or control
fan speed on such platforms through driver.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The extended bits were not available for use on vega20 and
presumably arcturus as well.
Fixes: a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12")
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing check in smu_v11_0_init_display_count(),
Fixes: af3b89d3a6 ("drm/amdgpu/smu11.0: convert to IP version checking")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if VCN instances are harvested when controlling
VCN power gating and setting up VCN clocks.
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some navy flounder boards do not properly mark harvested
VCN instances. Fix that here.
v2: use IP versions
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use the id variable, just use the constant
plus instance offset directly.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use the tmp variable, just use the constant
directly.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roughly the same code was present in all VCN versions.
Consolidate it into a single function.
v2: use AMDGPU_UCODE_ID_VCN + i, check if num_inst >= 2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Only enable firmware for the instance that is enabled.
v2: use AMDGPU_UCODE_ID_VCN + i
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all migrate.cpages returned from migrate_vma_setup can be migrated,
for example non anonymous page, or out of device memory. So after
migrate_vma_pages returns, add debug message to count pages are
successfully migrated which has MIGRATE_PFN_VALID and
MIGRATE_PFN_MIGRATE flag set.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cpages is only updated by migrate_vma_setup. So capture its value at
that point to clarify the significance of the number. The next patch
will add counting of actually migrated pages after migrate_vma_pages for
debug purposes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP firmware will be responsible for applying the GRBM CAM remapping in
the production. And the GRBM_CAM_INDEX / GRBM_CAM_DATA registers will be
protected by PSP under security policy. So remove it according to the
new security policy.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable GPU metrics feature in one VF mode.
These are only possible in one VF mode because the VF is dedicated in that case.
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Expose multi-LRC submission interface
Similar to the bonded submission interface but simplified.
Comes with GuC only implementation for now. See kerneldoc
for more details.
Userspace changes: https://github.com/intel/media-driver/pull/1252
- Expose logical engine instance to user
Needed by the multi-LRC submission interface for GuC
Userspace changes: https://github.com/intel/media-driver/pull/1252
Driver Changes:
- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)
- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)
- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
Just like we do for internal objects. Also just use
i915_gem_object_set_cache_coherency() here. No need for over-flushing on
LLC platforms.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-9-matthew.auld@intel.com
While the pages can't be swapped out, they can be discarded by the shrinker.
Normally such objects are marked with __I915_MADV_PURGED, which can't be
unset, and therefore requires a new object. For kernel internal objects
this is not true, since the madv hint is reset for our special volatile
objects, such that we can re-acquire new pages, if so desired, without
needing a new object. As a result we should probably be paranoid here
and put the object back into the CPU domain when discarding the pages,
and also correctly set cache_dirty, if required.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-8-matthew.auld@intel.com
Add some details around non-LLC platforms and cflushing, when dealing
with the flush-on-acquire, which is potentially security sensitive.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-7-matthew.auld@intel.com
On non-LLC platforms, force the flush-on-acquire if this is ever
swapped-in. Our async flush path is not trust worthy enough yet(and
happens in the wrong order), and with some tricks it's conceivable for
userspace to change the cache-level to I915_CACHE_NONE after the pages
are swapped-in, and since execbuf binds the object before doing the
async flush, there is a potential race window.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-6-matthew.auld@intel.com
Even though userptr objects are always coherent with the GPU, with no
way for userspace to change this with the set_caching ioctl, even on
non-LLC platforms, there is still the 'Bypass LCC' mocs setting, which
might permit reading the contents of main memory directly.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-5-matthew.auld@intel.com
As pointed out by Thomas, we likely need to flush the pages here if the
GPU can read the page contents directly from main memory. Underneath we
don't know what the sg_table is pointing to, so just add a
wbinvd_on_all_cpus() here, for now.
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-4-matthew.auld@intel.com
These are userspace objects, so mark them as such. In a later patch it's
useful to determine how paranoid we need to be when managing cache
flushes. In theory no functional changes.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-2-matthew.auld@intel.com
These are userspace objects, so mark them as such. In a later patch it's
useful to determine how paranoid we need to be when managing cache
flushes. In theory no functional changes.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-1-matthew.auld@intel.com
Change the error message when the bad_page_threshold is reached,
explicitly stating that the GPU will not be initialized.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is driven by the IP
discovery table now.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is now driven by
amdgpu IP discovery code.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is now driven by
amdgpu IP discovery code.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
raven_device_info is not used when KFD_SUPPORT_IOMMU_V2 is not
set.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hawaii_device_info is not used when CONFIG_DRM_AMDGPU_CIK is not
set.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check was incorrectly converted to IP version checking.
Fixes: 4b0ad84254 ("drm/amdgpu/gfx10: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When selecting between levels in the force performance levels interface
sclk (gfxclk) was not set correctly for all levels. Select the proper
sclk settings for all levels.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1726
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the following coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:427:
WARNING: use scnprintf or sprintf.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'drm/ttm/ttm_placement.h' included in
'drivers/gpu/drm/i915/selftests/mock_region.c' is duplicated.
It is also included on the 9 line.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ran Jianping <ran.jianping@zte.com.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019090205.1003458-1-ran.jianping@zte.com.cn
Otherwise, hw_id_name string is NULL for SDMA 2 and 3 when dumping
ip version from VBIOS.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Output a warning message if RAS TA returns UNSUPPORTED_ERROR_INJ status.
v2: implement it in psp_ras_ta_check_status function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create new function to check status returned by RAS TA.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1445d967fb.
This patch introduced a couple of dmesg warnings, this is not a valid
approach anymore. For this reason, we are reverting this patch, and we
need to revert the workaround patch.
v2: squash in unused variable removal (Alex)
Cc: Hanghong Ma <hanghong.ma@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
